diff options
Diffstat (limited to '60xx/libsensors_iio/software/core/mllite/results_holder.c')
-rw-r--r-- | 60xx/libsensors_iio/software/core/mllite/results_holder.c | 522 |
1 files changed, 522 insertions, 0 deletions
diff --git a/60xx/libsensors_iio/software/core/mllite/results_holder.c b/60xx/libsensors_iio/software/core/mllite/results_holder.c new file mode 100644 index 0000000..df58f40 --- /dev/null +++ b/60xx/libsensors_iio/software/core/mllite/results_holder.c @@ -0,0 +1,522 @@ +/* + $License: + Copyright (C) 2011-2012 InvenSense Corporation, All Rights Reserved. + See included License.txt for License information. + $ + */ +/** + * @defgroup Results_Holder results_holder + * @brief Motion Library - Results Holder + * Holds the data for MPL + * + * @{ + * @file results_holder.c + * @brief Results Holder for HAL. + */ + +#include <string.h> + +#include "results_holder.h" +#include "ml_math_func.h" +#include "mlmath.h" +#include "start_manager.h" +#include "data_builder.h" +#include "message_layer.h" +#include "log.h" + +// These 2 status bits are used to control when the 9 axis quaternion is updated +#define INV_COMPASS_CORRECTION_SET 1 +#define INV_6_AXIS_QUAT_SET 2 + +struct results_t { + long nav_quat[4]; + long gam_quat[4]; + inv_time_t nav_timestamp; + inv_time_t gam_timestamp; + long local_field[3]; /**< local earth's magnetic field */ + long mag_scale[3]; /**< scale factor to apply to magnetic field reading */ + long compass_correction[4]; /**< quaternion going from gyro,accel quaternion to 9 axis */ + int acc_state; /**< Describes accel state */ + int got_accel_bias; /**< Flag describing if accel bias is known */ + long compass_bias_error[3]; /**< Error Squared */ + unsigned char motion_state; + unsigned int motion_state_counter; /**< Incremented for each no motion event in a row */ + long compass_count; /**< compass state internal counter */ + int got_compass_bias; /**< Flag describing if compass bias is known */ + int large_mag_field; /**< Flag describing if there is a large magnetic field */ + int compass_state; /**< Internal compass state */ + long status; + struct inv_sensor_cal_t *sensor; + float quat_confidence_interval; +}; +static struct results_t rh; + +/** @internal +* Store a quaternion more suitable for gaming. This quaternion is often determined +* using only gyro and accel. +* @param[in] quat Length 4, Quaternion scaled by 2^30 +*/ +void inv_store_gaming_quaternion(const long *quat, inv_time_t timestamp) +{ + rh.status |= INV_6_AXIS_QUAT_SET; + memcpy(&rh.gam_quat, quat, sizeof(rh.gam_quat)); + rh.gam_timestamp = timestamp; +} + +/** @internal +* Sets the quaternion adjustment from 6 axis (accel, gyro) to 9 axis quaternion. +* @param[in] data Quaternion Adjustment +* @param[in] timestamp Timestamp of when this is valid +*/ +void inv_set_compass_correction(const long *data, inv_time_t timestamp) +{ + rh.status |= INV_COMPASS_CORRECTION_SET; + memcpy(rh.compass_correction, data, sizeof(rh.compass_correction)); + rh.nav_timestamp = timestamp; +} + +/** @internal +* Gets the quaternion adjustment from 6 axis (accel, gyro) to 9 axis quaternion. +* @param[out] data Quaternion Adjustment +* @param[out] timestamp Timestamp of when this is valid +*/ +void inv_get_compass_correction(long *data, inv_time_t *timestamp) +{ + memcpy(data, rh.compass_correction, sizeof(rh.compass_correction)); + *timestamp = rh.nav_timestamp; +} + +/** Returns non-zero if there is a large magnetic field. See inv_set_large_mag_field() for setting this variable. + * @return Returns non-zero if there is a large magnetic field. + */ +int inv_get_large_mag_field() +{ + return rh.large_mag_field; +} + +/** Set to non-zero if there as a large magnetic field. See inv_get_large_mag_field() for getting this variable. + * @param[in] state value to set for magnetic field strength. Should be non-zero if it is large. + */ +void inv_set_large_mag_field(int state) +{ + rh.large_mag_field = state; +} + +/** Gets the accel state set by inv_set_acc_state() + * @return accel state. + */ +int inv_get_acc_state() +{ + return rh.acc_state; +} + +/** Sets the accel state. See inv_get_acc_state() to get the value. + * @param[in] state value to set accel state to. + */ +void inv_set_acc_state(int state) +{ + rh.acc_state = state; + return; +} + +/** Returns the motion state +* @param[out] cntr Number of previous times a no motion event has occured in a row. +* @return Returns INV_SUCCESS if successful or an error code if not. +*/ +int inv_get_motion_state(unsigned int *cntr) +{ + *cntr = rh.motion_state_counter; + return rh.motion_state; +} + +/** Sets the motion state + * @param[in] state motion state where INV_NO_MOTION is not moving + * and INV_MOTION is moving. + */ +void inv_set_motion_state(unsigned char state) +{ + long set; + if (state == rh.motion_state) { + if (state == INV_NO_MOTION) { + rh.motion_state_counter++; + } else { + rh.motion_state_counter = 0; + } + return; + } + rh.motion_state_counter = 0; + rh.motion_state = state; + /* Equivalent to set = state, but #define's may change. */ + if (state == INV_MOTION) + set = INV_MSG_MOTION_EVENT; + else + set = INV_MSG_NO_MOTION_EVENT; + inv_set_message(set, (INV_MSG_MOTION_EVENT | INV_MSG_NO_MOTION_EVENT), 0); +} + +/** Sets the local earth's magnetic field +* @param[in] data Local earth's magnetic field in uT scaled by 2^16. +* Length = 3. Y typically points north, Z typically points down in +* northern hemisphere and up in southern hemisphere. +*/ +void inv_set_local_field(const long *data) +{ + memcpy(rh.local_field, data, sizeof(rh.local_field)); +} + +/** Gets the local earth's magnetic field +* @param[out] data Local earth's magnetic field in uT scaled by 2^16. +* Length = 3. Y typically points north, Z typically points down in +* northern hemisphere and up in southern hemisphere. +*/ +void inv_get_local_field(long *data) +{ + memcpy(data, rh.local_field, sizeof(rh.local_field)); +} + +/** Sets the compass sensitivity + * @param[in] data Length 3, sensitivity for each compass axis + * scaled such that 1.0 = 2^30. + */ +void inv_set_mag_scale(const long *data) +{ + memcpy(rh.mag_scale, data, sizeof(rh.mag_scale)); +} + +/** Gets the compass sensitivity + * @param[out] data Length 3, sensitivity for each compass axis + * scaled such that 1.0 = 2^30. + */ +void inv_get_mag_scale(long *data) +{ + memcpy(data, rh.mag_scale, sizeof(rh.mag_scale)); +} + +/** Gets gravity vector + * @param[out] data gravity vector in body frame scaled such that 1.0 = 2^30. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_get_gravity(long *data) +{ + data[0] = + inv_q29_mult(rh.nav_quat[1], rh.nav_quat[3]) - inv_q29_mult(rh.nav_quat[2], rh.nav_quat[0]); + data[1] = + inv_q29_mult(rh.nav_quat[2], rh.nav_quat[3]) + inv_q29_mult(rh.nav_quat[1], rh.nav_quat[0]); + data[2] = + (inv_q29_mult(rh.nav_quat[3], rh.nav_quat[3]) + inv_q29_mult(rh.nav_quat[0], rh.nav_quat[0])) - + 1073741824L; + + return INV_SUCCESS; +} + +/** Returns a quaternion based only on gyro and accel. + * @param[out] data 6-axis gyro and accel quaternion scaled such that 1.0 = 2^30. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_get_6axis_quaternion(long *data) +{ + memcpy(data, rh.gam_quat, sizeof(rh.gam_quat)); + return INV_SUCCESS; +} + +/** Returns a quaternion. + * @param[out] data 9-axis quaternion scaled such that 1.0 = 2^30. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_get_quaternion(long *data) +{ + if (rh.status & (INV_COMPASS_CORRECTION_SET | INV_6_AXIS_QUAT_SET)) { + inv_q_mult(rh.compass_correction, rh.gam_quat, rh.nav_quat); + rh.status &= ~(INV_COMPASS_CORRECTION_SET | INV_6_AXIS_QUAT_SET); + } + memcpy(data, rh.nav_quat, sizeof(rh.nav_quat)); + return INV_SUCCESS; +} + +/** Returns a quaternion. + * @param[out] data 9-axis quaternion. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_get_quaternion_float(float *data) +{ + long ldata[4]; + inv_error_t result = inv_get_quaternion(ldata); + data[0] = inv_q30_to_float(ldata[0]); + data[1] = inv_q30_to_float(ldata[1]); + data[2] = inv_q30_to_float(ldata[2]); + data[3] = inv_q30_to_float(ldata[3]); + return result; +} + +/** Returns a quaternion with accuracy and timestamp. + * @param[out] data 9-axis quaternion scaled such that 1.0 = 2^30. + * @param[out] accuracy Accuracy of quaternion, 0-3, where 3 is most accurate. + * @param[out] timestamp Timestamp of this quaternion in nanoseconds + */ +void inv_get_quaternion_set(long *data, int *accuracy, inv_time_t *timestamp) +{ + inv_get_quaternion(data); + *timestamp = inv_get_last_timestamp(); + if (inv_get_compass_on()) { + *accuracy = inv_get_mag_accuracy(); + } else if (inv_get_gyro_on()) { + *accuracy = inv_get_gyro_accuracy(); + }else if (inv_get_accel_on()) { + *accuracy = inv_get_accel_accuracy(); + } else { + *accuracy = 0; + } +} + +/** Callback that gets called everytime there is new data. It is + * registered by inv_start_results_holder(). + * @param[in] sensor_cal New sensor data to process. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_generate_results(struct inv_sensor_cal_t *sensor_cal) +{ + rh.sensor = sensor_cal; + return INV_SUCCESS; +} + +/** Function to turn on this module. This is automatically called by + * inv_enable_results_holder(). Typically not called by users. + * @return Returns INV_SUCCESS if successful or an error code if not. + */ +inv_error_t inv_start_results_holder(void) +{ + inv_register_data_cb(inv_generate_results, INV_PRIORITY_RESULTS_HOLDER, + INV_GYRO_NEW | INV_ACCEL_NEW | INV_MAG_NEW); + return INV_SUCCESS; +} + +/** Initializes results holder. This is called automatically by the +* enable function inv_enable_results_holder(). It may be called any time the feature is enabled, but +* is typically not needed to be called by outside callers. +* @return Returns INV_SUCCESS if successful or an error code if not. +*/ +inv_error_t inv_init_results_holder(void) +{ + memset(&rh, 0, sizeof(rh)); + rh.mag_scale[0] = 1L<<30; + rh.mag_scale[1] = 1L<<30; + rh.mag_scale[2] = 1L<<30; + rh.compass_correction[0] = 1L<<30; + rh.gam_quat[0] = 1L<<30; + rh.nav_quat[0] = 1L<<30; + rh.quat_confidence_interval = (float)M_PI; + return INV_SUCCESS; +} + +/** Turns on storage of results. +*/ +inv_error_t inv_enable_results_holder() +{ + inv_error_t result; + result = inv_init_results_holder(); + if ( result ) { + return result; + } + + result = inv_register_mpl_start_notification(inv_start_results_holder); + return result; +} + +/** Sets state of if we know the accel bias. + * @return return 1 if we know the accel bias, 0 if not. + * it is set with inv_set_accel_bias_found() + */ +int inv_got_accel_bias() +{ + return rh.got_accel_bias; +} + +/** Sets whether we know the accel bias + * @param[in] state Set to 1 if we know the accel bias. + * Can be retrieved with inv_got_accel_bias() + */ +void inv_set_accel_bias_found(int state) +{ + rh.got_accel_bias = state; +} + +/** Sets state of if we know the compass bias. + * @return return 1 if we know the compass bias, 0 if not. + * it is set with inv_set_compass_bias_found() + */ +int inv_got_compass_bias() +{ + return rh.got_compass_bias; +} + +/** Sets whether we know the compass bias + * @param[in] state Set to 1 if we know the compass bias. + * Can be retrieved with inv_got_compass_bias() + */ +void inv_set_compass_bias_found(int state) +{ + rh.got_compass_bias = state; +} + +/** Sets the compass state. + * @param[in] state Compass state. It can be retrieved with inv_get_compass_state(). + */ +void inv_set_compass_state(int state) +{ + rh.compass_state = state; +} + +/** Get's the compass state + * @return the compass state that was set with inv_set_compass_state() + */ +int inv_get_compass_state() +{ + return rh.compass_state; +} + +/** Set compass bias error. See inv_get_compass_bias_error() + * @param[in] bias_error Set's how accurate we know the compass bias. It is the + * error squared. + */ +void inv_set_compass_bias_error(const long *bias_error) +{ + memcpy(rh.compass_bias_error, bias_error, sizeof(rh.compass_bias_error)); +} + +/** Get's compass bias error. See inv_set_compass_bias_error() for setting. + * @param[out] bias_error Accuracy as to how well the compass bias is known. It is the error squared. + */ +void inv_get_compass_bias_error(long *bias_error) +{ + memcpy(bias_error, rh.compass_bias_error, sizeof(rh.compass_bias_error)); +} + +/** + * @brief Returns 3-element vector of accelerometer data in body frame + * with gravity removed + * @param[out] data 3-element vector of accelerometer data in body frame + * with gravity removed + * @return INV_SUCCESS if successful + * INV_ERROR_INVALID_PARAMETER if invalid input pointer + */ +inv_error_t inv_get_linear_accel(long *data) +{ + long gravity[3]; + + if (data != NULL) + { + inv_get_accel_set(data, NULL, NULL); + inv_get_gravity(gravity); + data[0] -= gravity[0] >> 14; + data[1] -= gravity[1] >> 14; + data[2] -= gravity[2] >> 14; + return INV_SUCCESS; + } + else { + return INV_ERROR_INVALID_PARAMETER; + } +} + +/** + * @brief Returns 3-element vector of accelerometer data in body frame + * @param[out] data 3-element vector of accelerometer data in body frame + * @return INV_SUCCESS if successful + * INV_ERROR_INVALID_PARAMETER if invalid input pointer + */ +inv_error_t inv_get_accel(long *data) +{ + if (data != NULL) { + inv_get_accel_set(data, NULL, NULL); + return INV_SUCCESS; + } + else { + return INV_ERROR_INVALID_PARAMETER; + } +} + +/** + * @brief Returns 3-element vector of accelerometer float data + * @param[out] data 3-element vector of accelerometer float data + * @return INV_SUCCESS if successful + * INV_ERROR_INVALID_PARAMETER if invalid input pointer + */ +inv_error_t inv_get_accel_float(float *data) +{ + long tdata[3]; + unsigned char i; + + if (data != NULL && !inv_get_accel(tdata)) { + for (i = 0; i < 3; ++i) { + data[i] = ((float)tdata[i] / (1L << 16)); + } + return INV_SUCCESS; + } + else { + return INV_ERROR_INVALID_PARAMETER; + } +} + +/** + * @brief Returns 3-element vector of gyro float data + * @param[out] data 3-element vector of gyro float data + * @return INV_SUCCESS if successful + * INV_ERROR_INVALID_PARAMETER if invalid input pointer + */ +inv_error_t inv_get_gyro_float(float *data) +{ + long tdata[3]; + unsigned char i; + + if (data != NULL) { + inv_get_gyro_set(tdata, NULL, NULL); + for (i = 0; i < 3; ++i) { + data[i] = ((float)tdata[i] / (1L << 16)); + } + return INV_SUCCESS; + } + else { + return INV_ERROR_INVALID_PARAMETER; + } +} + +/** Set 9 axis 95% heading confidence interval for quaternion +* @param[in] ci Confidence interval in radians. +*/ +void inv_set_heading_confidence_interval(float ci) +{ + rh.quat_confidence_interval = ci; +} + +/** Get 9 axis 95% heading confidence interval for quaternion +* @return Confidence interval in radians. +*/ +float inv_get_heading_confidence_interval(void) +{ + return rh.quat_confidence_interval; +} + +/** + * @brief Returns 3-element vector of linear accel float data + * @param[out] data 3-element vector of linear aceel float data + * @return INV_SUCCESS if successful + * INV_ERROR_INVALID_PARAMETER if invalid input pointer + */ +inv_error_t inv_get_linear_accel_float(float *data) +{ + long tdata[3]; + unsigned char i; + + if (data != NULL && !inv_get_linear_accel(tdata)) { + for (i = 0; i < 3; ++i) { + data[i] = ((float)tdata[i] / (1L << 16)); + } + return INV_SUCCESS; + } + else { + return INV_ERROR_INVALID_PARAMETER; + } +} + +/** + * @} + */ |