/* * Copyright (c) 2012, The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); you * may not use this file except in compliance with the License. You may * obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or * implied. See the License for the specific language governing * permissions and limitations under the License. */ #ifndef __QSEECOMAPI_H_ #define __QSEECOMAPI_H_ /*---------------------------------------------------------------------------- * Include Files * -------------------------------------------------------------------------*/ #include #include #define QSEECOM_ALIGN_SIZE 0x40 #define QSEECOM_ALIGN_MASK (QSEECOM_ALIGN_SIZE - 1) #define QSEECOM_ALIGN(x) \ ((x + QSEECOM_ALIGN_SIZE) & (~QSEECOM_ALIGN_MASK)) #ifdef __cplusplus extern "C" { #endif /*---------------------------------------------------------------------------- * Preprocessor Definitions and Constants * -------------------------------------------------------------------------*/ /** The memory is locked and non-pageable */ #define MEM_LOCKED 0x00000001 /** The memory is marked non-cacheable */ #define MEM_NON_CACHED 0x00000002 #define QSEECOM_APP_QUERY_FAILED -6 #define QSEECOM_APP_NOT_LOADED -5 #define QSEECOM_APP_ALREADY_LOADED -4 #define QSEECOM_LISTENER_UNREGISTERED -3 #define QSEECOM_LISTENER_ALREADY_REGISTERED -2 #define QSEECOM_LISTENER_REGISTER_FAIL -1 /*---------------------------------------------------------------------------- * Type Declarations * -------------------------------------------------------------------------*/ struct QSEECom_handle { unsigned char *ion_sbuffer; }; struct QSEECom_ion_fd_data { int32_t fd; uint32_t cmd_buf_offset; }; struct QSEECom_ion_fd_info { struct QSEECom_ion_fd_data data[4]; }; /*---------------------------------------------------------------------------- * Function Declarations and Documentation * -------------------------------------------------------------------------*/ /** * @brief Open a handle to the QSEECom device. * * - Load a secure application. The application will be verified that it is * secure by digital signature verification. * Allocate memory for sending requests to the QSAPP * * Note/Comments: * There is a one-to-one relation for a HLOS client and a QSAPP; * meaning that only one app can communicate to a QSAPP at a time. * * Please note that there is difference between an application and a listener * service. A QSAPP must be loaded at the request of the HLOS, * and all requests are orginated by the HLOS client. * A listener service on the otherhand is started during start-up by a * daemon, qseecomd. * * A HLOS application may create mutiple handles to the QSAPP * * @param[in/out] handle The device handle * @param[in] fname The directory and filename to load. * @param[in] sb_size Size of the shared buffer memory for sending requests. * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_start_app(struct QSEECom_handle **clnt_handle, const char *path, const char *fname, uint32_t sb_size); /** * @brief Close the application associated with the handle. * * - Unload a secure application. The driver will verify if there exists * any other applications that are communicating with the QSAPP to which * the "handle" is tied. * - De-allocate memory for sending requests to QSAPP. * * @param[in] handle The device handle * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_shutdown_app(struct QSEECom_handle **handle); /** * @brief Open a handle to the QSEECom device. * * - Load an external elf. The elf will be verified that it is * secure by digital signature verification. * * A HLOS application may create mutiple opens (only one is permitted for the * app, but each listener service can open a unique device in the same HLOS app * /executable. * @param[in/out] handle The device handle * @param[in] fname The directory and filename to load. * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_load_external_elf(struct QSEECom_handle **clnt_handle, const char *path, const char *fname); /** * @brief Close the external elf * * - Unload an external elf. * * @param[in] handle The device handle * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_unload_external_elf(struct QSEECom_handle **handle); /** * @brief Register an HLOS listener service. This allows messages from QSAPP * to be received. * * @param[in] handle The device handle * @param[in] lstnr_id The listener service identifier. This ID must be uniquely * assigned to avoid any collisions. * @param[in] sb_length Shared memory buffer between OS and QSE. * @param[in] flags Provide the shared memory flags attributes. * * @return Zero on success, negative on failure. errno will be set on * error. * */ int QSEECom_register_listener(struct QSEECom_handle **handle, uint32_t lstnr_id, uint32_t sb_length, uint32_t flags); /** * @brief Unregister a listener service. * * @param[in] handle The device handle * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_unregister_listener(struct QSEECom_handle *handle); /** * @brief Send QSAPP a "user" defined buffer (may contain some message/ * command request) and receives a response from QSAPP in receive buffer. * The HLOS client writes to the send_buf, where QSAPP writes to the rcv_buf. * This is a blocking call. * * @param[in] handle The device handle * @param[in] send_buf The buffer to be sent. * If using ion_sbuffer, ensure this * QSEECOM_BUFFER_ALIGN'ed. * @param[in] sbuf_len The send buffer length * If using ion_sbuffer, ensure length is * multiple of QSEECOM_BUFFER_ALIGN. * @param[in] rcv_buf The QSEOS returned buffer. * If using ion_sbuffer, ensure this is * QSEECOM_BUFFER_ALIGN'ed. * @param[in] rbuf_len The returned buffer length. * If using ion_sbuffer, ensure length is * multiple of QSEECOM_BUFFER_ALIGN. * @param[in] rbuf_len The returned buffer length. * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_send_cmd(struct QSEECom_handle *handle, void *send_buf, uint32_t sbuf_len, void *rcv_buf, uint32_t rbuf_len); /** * @brief Send QSAPP a "user" defined buffer (may contain some message/ * command request) and receives a response from QSAPP in receive buffer. * This API is same as send_cmd except it takes in addition parameter, * "ifd_data". This "ifd_data" holds information (ion fd handle and * cmd_buf_offset) used for modifying data in the message in send_buf * at an offset. Essentailly, it has the ion fd handle information to * retrieve physical address and modify the message in send_buf at the * mentioned offset. * * The HLOS client writes to the send_buf, where QSAPP writes to the rcv_buf. * This is a blocking call. * * @param[in] handle The device handle * @param[in] send_buf The buffer to be sent. * If using ion_sbuffer, ensure this * QSEECOM_BUFFER_ALIGN'ed. * @param[in] sbuf_len The send buffer length * If using ion_sbuffer, ensure length is * multiple of QSEECOM_BUFFER_ALIGN. * @param[in] rcv_buf The QSEOS returned buffer. * If using ion_sbuffer, ensure this is * QSEECOM_BUFFER_ALIGN'ed. * @param[in] rbuf_len The returned buffer length. * If using ion_sbuffer, ensure length is * multiple of QSEECOM_BUFFER_ALIGN. * @param[in] QSEECom_ion_fd_info data related to memory allocated by ion. * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_send_modified_cmd(struct QSEECom_handle *handle, void *send_buf, uint32_t sbuf_len, void *resp_buf, uint32_t rbuf_len, struct QSEECom_ion_fd_info *ifd_data); /** * @brief Receive a service defined buffer. * * @param[in] handle The device handle * @param[out] buf The buffer that is received * @param[in] len The receive buffer length * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_receive_req(struct QSEECom_handle *handle, void *buf, uint32_t len); /** * @brief Send a response based on the previous QSEECom_receive_req. * * This allows a listener service to receive a command (e.g. read file abc). * The service can then handle the request from QSEECom_receive_req, and provide * that information back to QSAPP. * * This allows the HLOS to act as the server and QSAPP to behave as the client. * * @param[in] handle The device handle * @param[out] send_buf The buffer to be returned back to QSAPP * @param[in] len The send buffer length * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_send_resp(struct QSEECom_handle *handle, void *send_buf, uint32_t len); /** * @brief Set the bandwidth for QSEE. * * This API resulst in improving the performance on the Crypto hardware * in QSEE. It should be called before issuing send_cmd/send_modified_cmd * for commands that requires using the crypto hardware on the QSEE. * Typically this API should be called before issuing the send request to * enable high performance mode and after completion of the send_cmd to * resume to low performance and hence to low power mode. * * This allows the clients of QSEECom to set the QSEE cyptpo HW bus * bandwidth to high/low. * * @param[in] high Set to 1 to enable bandwidth. * * @return Zero on success, negative on failure. errno will be set on * error. */ int QSEECom_set_bandwidth(struct QSEECom_handle *handle, bool high); /** * @brief Query QSEE to check if app is loaded. * * This API queries QSEE to see if the app is loaded or not. * * @param[in] app_name Name of the app. * * @return QSEECOM_APP_QUERY_FAILED/QSEECOM_APP_NOT_LOADED/QSEECOM_APP_LOADED. */ int QSEECom_app_load_query(struct QSEECom_handle *handle, char *app_name); #ifdef __cplusplus } #endif #endif