/* * Copyright 2001-2008 Texas Instruments - http://www.ti.com/ * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * ======== errbase.h ======== * DSP-BIOS Bridge driver support functions for TI OMAP processors. * Description: * Central repository for DSP/BIOS Bridge error and status code. * * Error codes are of the form: * []_E * * Success codes are of the form: * []_S * *! Revision History: *! ================ *! 24-Jan-2003 map Added DSP_SALREADYLOADED for persistent library checking *! 23-Nov-2002 gp: Minor comment cleanup. *! 13-May-2002 sg Added DSP_SALREADYASLEEP and DSP_SALREADYWAKE. *! 18-Feb-2002 mk: Added DSP_EOVERLAYMEMORY, EFWRITE, ENOSECT. *! 31-Jan-2002 mk: Added definitions of DSP_STRUE and DSP_SFALSE. *! 29-Jan-2002 mk: Added definition of CFG_E_INSUFFICIENTBUFSIZE. *! 24-Oct-2001 sp: Consolidated all the error codes into this file. *! 24-Jul-2001 mk: Type-casted all definitions of WSX_STATUS types for *! removal of compile warnings. *! 22-Nov-1999 kc: Changes from code review. *! 18-Aug-1999 rr: Ported From WSX. *! 29-May-1996 gp: Removed WCD_ and WMD_ error ranges. Redefined format of *! error codes. *! 10-May-1996 gp: Created. */ #ifndef ERRBASE_ #define ERRBASE_ #ifdef __cplusplus extern "C" { #endif /* ========================================================================== */ /* Base of generic errors and component errors */ /* ========================================================================== */ #define DSP_SBASE (DSP_STATUS)0x00008000 #define DSP_EBASE (DSP_STATUS)0x80008000 #define DSP_COMP_EBASE (DSP_STATUS)0x80040200 #define DSP_COMP_ELAST (DSP_STATUS)0x80047fff /* ========================================================================== */ /* SUCCESS Codes */ /* ========================================================================== */ /* -------------------------------------------------------------------------- */ /* Generic success code */ /* -------------------------------------------------------------------------- */ #define DSP_SOK (DSP_SBASE + 0) /* -------------------------------------------------------------------------- */ /* GPP is already attached to this DSP processor */ /* -------------------------------------------------------------------------- */ #define DSP_SALREADYATTACHED (DSP_SBASE + 1) /* -------------------------------------------------------------------------- */ /* This is the last object available for enumeration. */ /* -------------------------------------------------------------------------- */ #define DSP_SENUMCOMPLETE (DSP_SBASE + 2) /* -------------------------------------------------------------------------- */ /* The DSP is already asleep. */ /* -------------------------------------------------------------------------- */ #define DSP_SALREADYASLEEP (DSP_SBASE + 3) /* -------------------------------------------------------------------------- */ /* The DSP is already awake. */ /* -------------------------------------------------------------------------- */ #define DSP_SALREADYAWAKE (DSP_SBASE + 4) /* -------------------------------------------------------------------------- */ /* TRUE */ /* -------------------------------------------------------------------------- */ #define DSP_STRUE (DSP_SBASE + 5) /* -------------------------------------------------------------------------- */ /* FALSE */ /* -------------------------------------------------------------------------- */ #define DSP_SFALSE (DSP_SBASE + 6) /* -------------------------------------------------------------------------- */ /* A library contains no dependent library references */ /* -------------------------------------------------------------------------- */ #define DSP_SNODEPENDENTLIBS (DSP_SBASE + 7) /* -------------------------------------------------------------------------- */ /* A persistent library is already loaded by the dynamic loader */ /* -------------------------------------------------------------------------- */ #define DSP_SALREADYLOADED (DSP_SBASE + 8) /* -------------------------------------------------------------------------- */ /* Some error occured, but it is OK to continue */ /* -------------------------------------------------------------------------- */ #define DSP_OKTO_CONTINUE (DSP_SBASE + 9) /* ========================================================================== */ /* FAILURE Codes */ /* ========================================================================== */ /* -------------------------------------------------------------------------- */ /* The caller does not have access privileges to call this function */ /* -------------------------------------------------------------------------- */ #define DSP_EACCESSDENIED (DSP_EBASE + 0) /* -------------------------------------------------------------------------- */ /* The Specified Connection already exists */ /* -------------------------------------------------------------------------- */ #define DSP_EALREADYCONNECTED (DSP_EBASE + 1) /* -------------------------------------------------------------------------- */ /* The GPP must be detached from the DSP before this function is called */ /* -------------------------------------------------------------------------- */ #define DSP_EATTACHED (DSP_EBASE + 2) /* -------------------------------------------------------------------------- */ /* During enumeration a change in the number or properties of the objects */ /* has occurred. */ /* -------------------------------------------------------------------------- */ #define DSP_ECHANGEDURINGENUM (DSP_EBASE + 3) /* -------------------------------------------------------------------------- */ /* An error occurred while parsing the DSP executable file */ /* -------------------------------------------------------------------------- */ #define DSP_ECORRUPTFILE (DSP_EBASE + 4) /* -------------------------------------------------------------------------- */ /* A failure occurred during a delete operation */ /* -------------------------------------------------------------------------- */ #define DSP_EDELETE (DSP_EBASE + 5) /* -------------------------------------------------------------------------- */ /* The specified direction is invalid */ /* -------------------------------------------------------------------------- */ #define DSP_EDIRECTION (DSP_EBASE + 6) /* -------------------------------------------------------------------------- */ /* A stream has been issued the maximum number of buffers allowed in the */ /* stream at once ; buffers must be reclaimed from the stream before any */ /* more can be issued. */ /* -------------------------------------------------------------------------- */ #define DSP_ESTREAMFULL (DSP_EBASE + 7) /* -------------------------------------------------------------------------- */ /* A general failure occurred */ /* -------------------------------------------------------------------------- */ #define DSP_EFAIL (DSP_EBASE + 8) /* -------------------------------------------------------------------------- */ /* The specified executable file could not be found. */ /* -------------------------------------------------------------------------- */ #define DSP_EFILE (DSP_EBASE + 9) /* -------------------------------------------------------------------------- */ /* The specified handle is invalid. */ /* -------------------------------------------------------------------------- */ #define DSP_EHANDLE (DSP_EBASE + 0xa) /* -------------------------------------------------------------------------- */ /* An invalid argument was specified. */ /* -------------------------------------------------------------------------- */ #define DSP_EINVALIDARG (DSP_EBASE + 0xb) /* -------------------------------------------------------------------------- */ /* A memory allocation failure occurred. */ /* -------------------------------------------------------------------------- */ #define DSP_EMEMORY (DSP_EBASE + 0xc) /* -------------------------------------------------------------------------- */ /* The requested operation is invalid for this node type. */ /* -------------------------------------------------------------------------- */ #define DSP_ENODETYPE (DSP_EBASE + 0xd) /* -------------------------------------------------------------------------- */ /* No error text was found for the specified error code. */ /* -------------------------------------------------------------------------- */ #define DSP_ENOERRTEXT (DSP_EBASE + 0xe) /* -------------------------------------------------------------------------- */ /* No more connections can be made for this node. */ /* -------------------------------------------------------------------------- */ #define DSP_ENOMORECONNECTIONS (DSP_EBASE + 0xf) /* -------------------------------------------------------------------------- */ /* The indicated operation is not supported. */ /* -------------------------------------------------------------------------- */ #define DSP_ENOTIMPL (DSP_EBASE + 0x10) /* -------------------------------------------------------------------------- */ /* I/O is currently pending. */ /* -------------------------------------------------------------------------- */ #define DSP_EPENDING (DSP_EBASE + 0x11) /* -------------------------------------------------------------------------- */ /* An invalid pointer was specified. */ /* -------------------------------------------------------------------------- */ #define DSP_EPOINTER (DSP_EBASE + 0x12) /* -------------------------------------------------------------------------- */ /* A parameter is specified outside its valid range. */ /* -------------------------------------------------------------------------- */ #define DSP_ERANGE (DSP_EBASE + 0x13) /* -------------------------------------------------------------------------- */ /* An invalid size parameter was specified. */ /* -------------------------------------------------------------------------- */ #define DSP_ESIZE (DSP_EBASE + 0x14) /* -------------------------------------------------------------------------- */ /* A stream creation failure occurred on the DSP. */ /* -------------------------------------------------------------------------- */ #define DSP_ESTREAM (DSP_EBASE + 0x15) /* -------------------------------------------------------------------------- */ /* A task creation failure occurred on the DSP. */ /* -------------------------------------------------------------------------- */ #define DSP_ETASK (DSP_EBASE + 0x16) /* -------------------------------------------------------------------------- */ /* A timeout occurred before the requested operation could complete. */ /* -------------------------------------------------------------------------- */ #define DSP_ETIMEOUT (DSP_EBASE + 0x17) /* -------------------------------------------------------------------------- */ /* A data truncation occurred, e.g., when requesting a descriptive error */ /* string, not enough space was allocated for the complete error message. */ /* -------------------------------------------------------------------------- */ #define DSP_ETRUNCATED (DSP_EBASE + 0x18) /* -------------------------------------------------------------------------- */ /* A parameter is invalid. */ /* -------------------------------------------------------------------------- */ #define DSP_EVALUE (DSP_EBASE + 0x1a) /* -------------------------------------------------------------------------- */ /* The state of the specified object is incorrect for the requested */ /* operation. */ /* -------------------------------------------------------------------------- */ #define DSP_EWRONGSTATE (DSP_EBASE + 0x1b) /* -------------------------------------------------------------------------- */ /* Symbol not found in the COFF file. DSPNode_Create will return this if */ /* the iAlg function table for an xDAIS socket is not found in the COFF file. */ /* In this case, force the symbol to be linked into the COFF file. */ /* DSPNode_Create, DSPNode_Execute, and DSPNode_Delete will return this if */ /* the create, execute, or delete phase function, respectively, could not be */ /* found in the COFF file. */ /* -------------------------------------------------------------------------- */ #define DSP_ESYMBOL (DSP_EBASE + 0x1c) /* -------------------------------------------------------------------------- */ /* UUID not found in registry. */ /* -------------------------------------------------------------------------- */ #define DSP_EUUID (DSP_EBASE + 0x1d) /* -------------------------------------------------------------------------- */ /* Unable to read content of DCD data section ; this is typically caused by */ /* improperly configured nodes. */ /* -------------------------------------------------------------------------- */ #define DSP_EDCDREADSECT (DSP_EBASE + 0x1e) /* -------------------------------------------------------------------------- */ /* Unable to decode DCD data section content ; this is typically caused by */ /* changes to DSP/BIOS Bridge data structures. */ /* -------------------------------------------------------------------------- */ #define DSP_EDCDPARSESECT (DSP_EBASE + 0x1f) /* -------------------------------------------------------------------------- */ /* Unable to get pointer to DCD data section ; this is typically caused by */ /* improperly configured UUIDs. */ /* -------------------------------------------------------------------------- */ #define DSP_EDCDGETSECT (DSP_EBASE + 0x20) /* -------------------------------------------------------------------------- */ /* Unable to load file containing DCD data section ; this is typically */ /* caused by a missing COFF file. */ /* -------------------------------------------------------------------------- */ #define DSP_EDCDLOADBASE (DSP_EBASE + 0x21) /* -------------------------------------------------------------------------- */ /* The specified COFF file does not contain a valid node registration */ /* section. */ /* -------------------------------------------------------------------------- */ #define DSP_EDCDNOAUTOREGISTER (DSP_EBASE + 0x22) /* -------------------------------------------------------------------------- */ /* A requested resource is not available. */ /* -------------------------------------------------------------------------- */ #define DSP_ERESOURCE (DSP_EBASE + 0x28) /* -------------------------------------------------------------------------- */ /* A critical error has occurred, and the DSP is being re-started. */ /* -------------------------------------------------------------------------- */ #define DSP_ERESTART (DSP_EBASE + 0x29) /* -------------------------------------------------------------------------- */ /* A DSP memory free operation failed. */ /* -------------------------------------------------------------------------- */ #define DSP_EFREE (DSP_EBASE + 0x2a) /* -------------------------------------------------------------------------- */ /* A DSP I/O free operation failed. */ /* -------------------------------------------------------------------------- */ #define DSP_EIOFREE (DSP_EBASE + 0x2b) /* -------------------------------------------------------------------------- */ /* Multiple instances are not allowed. */ /* -------------------------------------------------------------------------- */ #define DSP_EMULINST (DSP_EBASE + 0x2c) /* -------------------------------------------------------------------------- */ /* A specified entity was not found. */ /* -------------------------------------------------------------------------- */ #define DSP_ENOTFOUND (DSP_EBASE + 0x2d) /* -------------------------------------------------------------------------- */ /* A DSP I/O resource is not available. */ /* -------------------------------------------------------------------------- */ #define DSP_EOUTOFIO (DSP_EBASE + 0x2e) /* -------------------------------------------------------------------------- */ /* A shared memory buffer contained in a message or stream could not be */ /* mapped to the GPP client process's virtual space. */ /* -------------------------------------------------------------------------- */ #define DSP_ETRANSLATE (DSP_EBASE + 0x2f) /* -------------------------------------------------------------------------- */ /* File or section load write function failed to write to DSP */ /* -------------------------------------------------------------------------- */ #define DSP_EFWRITE (DSP_EBASE + 0x31) /* -------------------------------------------------------------------------- */ /* Unable to find a named section in DSP executable */ /* -------------------------------------------------------------------------- */ #define DSP_ENOSECT (DSP_EBASE + 0x32) /* -------------------------------------------------------------------------- */ /* Unable to open file */ /* -------------------------------------------------------------------------- */ #define DSP_EFOPEN (DSP_EBASE + 0x33) /* -------------------------------------------------------------------------- */ /* Unable to read file */ /* -------------------------------------------------------------------------- */ #define DSP_EFREAD (DSP_EBASE + 0x34) /* -------------------------------------------------------------------------- */ /* A non-existent memory segment identifier was specified */ /* -------------------------------------------------------------------------- */ #define DSP_EOVERLAYMEMORY (DSP_EBASE + 0x37) /* -------------------------------------------------------------------------- */ /* Invalid segment ID */ /* -------------------------------------------------------------------------- */ #define DSP_EBADSEGID (DSP_EBASE + 0x38) /* -------------------------------------------------------------------------- */ /* Invalid alignment */ /* -------------------------------------------------------------------------- */ #define DSP_EALIGNMENT (DSP_EBASE + 0x39) /* -------------------------------------------------------------------------- */ /* Invalid stream mode */ /* -------------------------------------------------------------------------- */ #define DSP_ESTRMMODE (DSP_EBASE + 0x3a) /* -------------------------------------------------------------------------- */ /* Nodes not connected */ /* -------------------------------------------------------------------------- */ #define DSP_ENOTCONNECTED (DSP_EBASE + 0x3b) /* -------------------------------------------------------------------------- */ /* Not shared memory */ /* -------------------------------------------------------------------------- */ #define DSP_ENOTSHAREDMEM (DSP_EBASE + 0x3c) /* -------------------------------------------------------------------------- */ /* Error occurred in a dynamic loader library function */ /* -------------------------------------------------------------------------- */ #define DSP_EDYNLOAD (DSP_EBASE + 0x3d) /* -------------------------------------------------------------------------- */ /* Device in 'sleep/suspend' mode due to DPM */ /* -------------------------------------------------------------------------- */ #define DSP_EDPMSUSPEND (DSP_EBASE + 0x3e) /* -------------------------------------------------------------------------- */ /* A node-specific error has occurred. */ /* -------------------------------------------------------------------------- */ #define DSP_EUSER1 (DSP_EBASE + 0x40) #define DSP_EUSER2 (DSP_EBASE + 0x41) #define DSP_EUSER3 (DSP_EBASE + 0x42) #define DSP_EUSER4 (DSP_EBASE + 0x43) #define DSP_EUSER5 (DSP_EBASE + 0x44) #define DSP_EUSER6 (DSP_EBASE + 0x45) #define DSP_EUSER7 (DSP_EBASE + 0x46) #define DSP_EUSER8 (DSP_EBASE + 0x47) #define DSP_EUSER9 (DSP_EBASE + 0x48) #define DSP_EUSER10 (DSP_EBASE + 0x49) #define DSP_EUSER11 (DSP_EBASE + 0x4a) #define DSP_EUSER12 (DSP_EBASE + 0x4b) #define DSP_EUSER13 (DSP_EBASE + 0x4c) #define DSP_EUSER14 (DSP_EBASE + 0x4d) #define DSP_EUSER15 (DSP_EBASE + 0x4e) #define DSP_EUSER16 (DSP_EBASE + 0x4f) /* ========================================================================== */ /* FAILURE Codes : DEV */ /* ========================================================================== */ #define DEV_EBASE (DSP_COMP_EBASE + 0x000) /* -------------------------------------------------------------------------- */ /* The mini-driver expected a newer version of the class driver. */ /* -------------------------------------------------------------------------- */ #define DEV_E_NEWWMD (DEV_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* WMD_DRV_Entry function returned a NULL function interface table. */ /* -------------------------------------------------------------------------- */ #define DEV_E_NULLWMDINTF (DEV_EBASE + 0x01) /* ========================================================================== */ /* FAILURE Codes : LDR */ /* ========================================================================== */ #define LDR_EBASE (DSP_COMP_EBASE + 0x100) /* -------------------------------------------------------------------------- */ /* Insufficient memory to export class driver services. */ /* -------------------------------------------------------------------------- */ #define LDR_E_NOMEMORY (LDR_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Unable to find WMD file in system directory. */ /* -------------------------------------------------------------------------- */ #define LDR_E_FILEUNABLETOOPEN (LDR_EBASE + 0x01) /* ========================================================================== */ /* FAILURE Codes : CFG */ /* ========================================================================== */ #define CFG_EBASE (DSP_COMP_EBASE + 0x200) /* -------------------------------------------------------------------------- */ /* Invalid pointer passed into a configuration module function */ /* -------------------------------------------------------------------------- */ #define CFG_E_INVALIDPOINTER (CFG_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Invalid device node handle passed into a configuration module function. */ /* -------------------------------------------------------------------------- */ #define CFG_E_INVALIDHDEVNODE (CFG_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* Unable to retrieve resource information from the registry. */ /* -------------------------------------------------------------------------- */ #define CFG_E_RESOURCENOTAVAIL (CFG_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* Unable to find board name key in registry. */ /* -------------------------------------------------------------------------- */ #define CFG_E_INVALIDBOARDNAME (CFG_EBASE + 0x03) /* -------------------------------------------------------------------------- */ /* Unable to find a device node in registry with given unit number. */ /* -------------------------------------------------------------------------- */ #define CFG_E_INVALIDUNITNUM (CFG_EBASE + 0x04) /* -------------------------------------------------------------------------- */ /* Insufficient buffer size */ /* -------------------------------------------------------------------------- */ #define CFG_E_INSUFFICIENTBUFSIZE (CFG_EBASE + 0x05) /* ========================================================================== */ /* FAILURE Codes : BRD */ /* ========================================================================== */ #define BRD_EBASE (DSP_COMP_EBASE + 0x300) /* -------------------------------------------------------------------------- */ /* Board client does not have sufficient access rights for this operation. */ /* -------------------------------------------------------------------------- */ #define BRD_E_ACCESSDENIED (BRD_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Unable to find trace buffer symbols in the DSP executable COFF file. */ /* -------------------------------------------------------------------------- */ #define BRD_E_NOTRACEBUFFER (BRD_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* Attempted to auto-start board, but no default DSP executable configured. */ /* -------------------------------------------------------------------------- */ #define BRD_E_NOEXEC (BRD_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* The operation failed because it was started from a wrong state */ /* -------------------------------------------------------------------------- */ #define BRD_E_WRONGSTATE (BRD_EBASE + 0x03) /* ========================================================================== */ /* FAILURE Codes : COD */ /* ========================================================================== */ #define COD_EBASE (DSP_COMP_EBASE + 0x400) /* -------------------------------------------------------------------------- */ /* No symbol table is loaded for this board. */ /* -------------------------------------------------------------------------- */ #define COD_E_NOSYMBOLSLOADED (COD_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Symbol not found in for this board. */ /* -------------------------------------------------------------------------- */ #define COD_E_SYMBOLNOTFOUND (COD_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* ZL DLL module is not exporting the correct function interface. */ /* -------------------------------------------------------------------------- */ #define COD_E_NOZLFUNCTIONS (COD_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* Unable to initialize the ZL COFF parsing module. */ /* -------------------------------------------------------------------------- */ #define COD_E_ZLCREATEFAILED (COD_EBASE + 0x03) /* -------------------------------------------------------------------------- */ /* Unable to open DSP executable COFF file. */ /* -------------------------------------------------------------------------- */ #define COD_E_OPENFAILED (COD_EBASE + 0x04) /* -------------------------------------------------------------------------- */ /* Unable to parse DSP executable COFF file. */ /* -------------------------------------------------------------------------- */ #define COD_E_LOADFAILED (COD_EBASE + 0x05) /* -------------------------------------------------------------------------- */ /* Unable to read DSP executable COFF file. */ /* -------------------------------------------------------------------------- */ #define COD_E_READFAILED (COD_EBASE + 0x06) /* ========================================================================== */ /* FAILURE Codes : CHNL */ /* ========================================================================== */ #define CHNL_EBASE (DSP_COMP_EBASE + 0x500) /* -------------------------------------------------------------------------- */ /* Attempt to created channel manager with too many channels. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_MAXCHANNELS (CHNL_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* No channel manager exists for this mini-driver. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_NOMGR (CHNL_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* No free channels are available. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_OUTOFSTREAMS (CHNL_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* Channel ID is out of range. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_BADCHANID (CHNL_EBASE + 0x03) /* -------------------------------------------------------------------------- */ /* Channel is already in use. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_CHANBUSY (CHNL_EBASE + 0x04) /* -------------------------------------------------------------------------- */ /* Invalid channel mode argument. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_BADMODE (CHNL_EBASE + 0x05) /* -------------------------------------------------------------------------- */ /* dwTimeOut parameter was CHNL_IOCNOWAIT, yet no I/O completions were */ /* queued. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_NOIOC (CHNL_EBASE + 0x06) /* -------------------------------------------------------------------------- */ /* I/O has been cancelled on this channel. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_CANCELLED (CHNL_EBASE + 0x07) /* -------------------------------------------------------------------------- */ /* End of stream was already requested on this output channel. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_EOS (CHNL_EBASE + 0x09) /* -------------------------------------------------------------------------- */ /* Unable to create the channel event object. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_CREATEEVENT (CHNL_EBASE + 0x0A) /* -------------------------------------------------------------------------- */ /* Board name and unit number do not identify a valid board name. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_BRDID (CHNL_EBASE + 0x0B) /* -------------------------------------------------------------------------- */ /* Invalid IRQ configured for this WMD for this system. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_INVALIDIRQ (CHNL_EBASE + 0x0C) /* -------------------------------------------------------------------------- */ /* DSP word size of zero configured for this device. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_INVALIDWORDSIZE (CHNL_EBASE + 0x0D) /* -------------------------------------------------------------------------- */ /* A zero length memory base was specified for a shared memory class driver. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_INVALIDMEMBASE (CHNL_EBASE + 0x0E) /* -------------------------------------------------------------------------- */ /* Memory map is not configured, or unable to map physical to linear */ /* address. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_NOMEMMAP (CHNL_EBASE + 0x0F) /* -------------------------------------------------------------------------- */ /* Attempted to create a channel manager when one already exists. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_MGREXISTS (CHNL_EBASE + 0x10) /* -------------------------------------------------------------------------- */ /* Unable to plug channel ISR for configured IRQ. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_ISR (CHNL_EBASE + 0x11) /* -------------------------------------------------------------------------- */ /* No free I/O request packets are available. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_NOIORPS (CHNL_EBASE + 0x12) /* -------------------------------------------------------------------------- */ /* Buffer size is larger than the size of physical channel. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_BUFSIZE (CHNL_EBASE + 0x13) /* -------------------------------------------------------------------------- */ /* User cannot mark end of stream on an input channel. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_NOEOS (CHNL_EBASE + 0x14) /* -------------------------------------------------------------------------- */ /* Wait for flush operation on an output channel timed out. */ /* -------------------------------------------------------------------------- */ #define CHNL_E_WAITTIMEOUT (CHNL_EBASE + 0x15) /* -------------------------------------------------------------------------- */ /* User supplied hEvent must be specified with pstrEventName attribute */ /* -------------------------------------------------------------------------- */ #define CHNL_E_BADUSEREVENT (CHNL_EBASE + 0x16) /* -------------------------------------------------------------------------- */ /* Illegal user event name specified */ /* -------------------------------------------------------------------------- */ #define CHNL_E_USEREVENTNAME (CHNL_EBASE + 0x17) /* -------------------------------------------------------------------------- */ /* Unable to prepare buffer specified */ /* -------------------------------------------------------------------------- */ #define CHNL_E_PREPFAILED (CHNL_EBASE + 0x18) /* -------------------------------------------------------------------------- */ /* Unable to Unprepare buffer specified */ /* -------------------------------------------------------------------------- */ #define CHNL_E_UNPREPFAILED (CHNL_EBASE + 0x19) /* ========================================================================== */ /* FAILURE Codes : SYNC */ /* ========================================================================== */ #define SYNC_EBASE (DSP_COMP_EBASE + 0x600) /* -------------------------------------------------------------------------- */ /* Wait on a kernel event failed. */ /* -------------------------------------------------------------------------- */ #define SYNC_E_FAIL (SYNC_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Timeout expired while waiting for event to be signalled. */ /* -------------------------------------------------------------------------- */ #define SYNC_E_TIMEOUT (SYNC_EBASE + 0x01) /* ========================================================================== */ /* FAILURE Codes : WMD */ /* ========================================================================== */ #define WMD_EBASE (DSP_COMP_EBASE + 0x700) /* -------------------------------------------------------------------------- */ /* A test of hardware assumptions or integrity failed. */ /* -------------------------------------------------------------------------- */ #define WMD_E_HARDWARE (WMD_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* One or more configuration parameters violated WMD hardware assumptions. */ /* -------------------------------------------------------------------------- */ #define WMD_E_BADCONFIG (WMD_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* Timeout occurred waiting for a response from the hardware. */ /* -------------------------------------------------------------------------- */ #define WMD_E_TIMEOUT (WMD_EBASE + 0x02) /* ========================================================================== */ /* FAILURE Codes : REG */ /* ========================================================================== */ #define REG_EBASE (DSP_COMP_EBASE + 0x800) /* -------------------------------------------------------------------------- */ /* Invalid subkey parameter. */ /* -------------------------------------------------------------------------- */ #define REG_E_INVALIDSUBKEY (REG_EBASE + 0x00) /* -------------------------------------------------------------------------- */ /* Invalid entry parameter. */ /* -------------------------------------------------------------------------- */ #define REG_E_INVALIDENTRY (REG_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* No more registry values. */ /* -------------------------------------------------------------------------- */ #define REG_E_NOMOREITEMS (REG_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* Insufficient space to hold data in registry value. */ /* -------------------------------------------------------------------------- */ #define REG_E_MOREDATA (REG_EBASE + 0x03) /* ========================================================================== */ /* FAILURE Codes : KFILE */ /* ========================================================================== */ #define KFILE_EBASE (DSP_COMP_EBASE + 0x900) /* -------------------------------------------------------------------------- */ /* Invalid file handle. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_INVALIDHANDLE (KFILE_EBASE + 0x01) /* -------------------------------------------------------------------------- */ /* Bad file name. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_BADFILENAME (KFILE_EBASE + 0x02) /* -------------------------------------------------------------------------- */ /* Invalid file mode. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_INVALIDMODE (KFILE_EBASE + 0x03) /* -------------------------------------------------------------------------- */ /* No resources available. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_NORESOURCES (KFILE_EBASE + 0x04) /* -------------------------------------------------------------------------- */ /* Invalid file buffer . */ /* -------------------------------------------------------------------------- */ #define E_KFILE_INVALIDBUFFER (KFILE_EBASE + 0x05) /* -------------------------------------------------------------------------- */ /* Bad origin argument. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_BADORIGINFLAG (KFILE_EBASE + 0x06) /* -------------------------------------------------------------------------- */ /* Invalid file offset value. */ /* -------------------------------------------------------------------------- */ #define E_KFILE_INVALIDOFFSET (KFILE_EBASE + 0x07) /* -------------------------------------------------------------------------- */ /* General KFILE error condition */ /* -------------------------------------------------------------------------- */ #define E_KFILE_ERROR (KFILE_EBASE + 0x08) #ifdef __cplusplus } #endif #endif /* ERRBASE_ */