path: root/wl1271/stad/src/Connection_Managment/sme.c

/*
 * sme.c
 *
 * Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.      
 * All rights reserved.                                                  
 *                                                                       
 * Redistribution and use in source and binary forms, with or without    
 * modification, are permitted provided that the following conditions    
 * are met:                                                              
 *                                                                       
 *  * Redistributions of source code must retain the above copyright     
 *    notice, this list of conditions and the following disclaimer.      
 *  * Redistributions in binary form must reproduce the above copyright  
 *    notice, this list of conditions and the following disclaimer in    
 *    the documentation and/or other materials provided with the         
 *    distribution.                                                      
 *  * Neither the name Texas Instruments nor the names of its            
 *    contributors may be used to endorse or promote products derived    
 *    from this software without specific prior written permission.      
 *                                                                       
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS   
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT     
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT  
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT      
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT   
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** \file  sme.c
 *  \brief SME implementation
 *
 *  \see   sme.h, smeSm.c smePrivate.h
 */


#define __FILE_ID__  FILE_ID_41
#include "smePrivate.h"
#include "GenSM.h"
#include "scanResultTable.h"
#include "smeSm.h"
#include "siteMgrApi.h"
#include "regulatoryDomainApi.h"
#include "connApi.h"


/** 
 * \fn     sme_Create 
 * \brief  Creates the SME module. Allocates system resources
 * 
 * Creates the SME module. Allocates system resources
 * 
 * \param  hOS - handle to the OS adaptation layer
 * \return Handle to the SME object
 * \sa     sme_Init, sme_SetDefaults, sme_Destroy
 */ 
TI_HANDLE sme_Create (TI_HANDLE hOS)
{
    TSme    *pSme;

    /* allocate space for the SME object */
    pSme = (TSme*)os_memoryAlloc (hOS, sizeof (TSme));
    if (NULL == pSme)
    {
        WLAN_OS_REPORT (("sme_Create: unable to allocate memor yfor SME object. SME craetion failed\n"));
        return NULL;
    }

    /*  nullify SME object */
    os_memoryZero (hOS, (void*)pSme, sizeof (TSme));

    /* store OS handle */
    pSme->hOS = hOS;
    
    /* Create SME generic state-machine */
    pSme->hSmeSm = genSM_Create (hOS);
    if (NULL == pSme->hSmeSm)
    {
        WLAN_OS_REPORT (("sme_Create: unable to create SME generic SM. SME creation failed\n"));
        sme_Destroy ((TI_HANDLE)pSme);
        return NULL;
    }

    /* Create SME scan result table */
    pSme->hSmeScanResultTable = scanResultTable_Create (hOS, SME_SCAN_TABLE_ENTRIES);
    if (NULL == pSme->hSmeScanResultTable)
    {
        WLAN_OS_REPORT (("sme_Create: unable to create scan result table. SME creation failed\n"));
        sme_Destroy ((TI_HANDLE)pSme);
        return NULL;
    }

    return (TI_HANDLE)pSme;
}

/** 
 * \fn     sme_Init
 * \brief  Initializes the SME object. Store module handles
 * 
 * Initializes the SME object. Store module handles
 * 
 * \param  pStadHandles - pointer to the handles structure
 * \return None
 * \sa     sme_Create, sme_SetDefaults
 */ 
void sme_Init (TStadHandlesList *pStadHandles)
{
    TSme        *pSme = pStadHandles->hSme;

    /* Store object handles */
    pSme->hReport       = pStadHandles->hReport;
    pSme->hScanCncn     = pStadHandles->hScanCncn;
    pSme->hApConn       = pStadHandles->hAPConnection;
    pSme->hConn         = pStadHandles->hConn;
    pSme->hScr          = pStadHandles->hSCR;
    pSme->hRegDomain    = pStadHandles->hRegulatoryDomain;
    pSme->hEvHandler    = pStadHandles->hEvHandler;
    pSme->hSiteMgr      = pStadHandles->hSiteMgr;
    pSme->hRsn          = pStadHandles->hRsn;
    pSme->hDrvMain      = pStadHandles->hDrvMain;
    pSme->hTwd          = pStadHandles->hTWD;


    /* Initialize the scan result table object */
    scanResultTable_Init (pSme->hSmeScanResultTable, pStadHandles, SCAN_RESULT_TABLE_CLEAR);

    /* Initialize the SME state-machine object */
    genSM_Init (pSme->hSmeSm, pStadHandles->hReport);
}

/** 
 * \fn     sme_SetDefaults
 * \brief  Set default values to the SME (and the SM and scan result table)
 * 
 * Set default values to the SME (and the SM and scan result table)
 * 
 * \param  hSme - handle to the SME object
 * \param  pInitParams - values read from registry / ini file
 * \return None
 * \sa     sme_Create, sme_Init
 */ 
void sme_SetDefaults (TI_HANDLE hSme, TSmeModifiedInitParams *pModifiedInitParams, TSmeInitParams *pInitParams)
{
    TSme        *pSme = (TSme*)hSme;

    /* copy init params */
    os_memoryCopy (pSme->hOS, &(pSme->tInitParams), pInitParams, sizeof (TSmeInitParams));

    /* initialize SME varaibles */   
    pSme->bRadioOn = pModifiedInitParams->bRadioOn;
    pSme->eConnectMode = pModifiedInitParams->eConnectMode;
    if (CONNECT_MODE_AUTO == pSme->eConnectMode)
    {
        pSme->hScanResultTable = pSme->hSmeScanResultTable;
    }
    else if (CONNECT_MODE_MANUAL == pSme->eConnectMode) 
    {
        pSme->hScanResultTable = pSme->hScanCncnScanResulTable;
    }

    pSme->eBssType = pModifiedInitParams->eDesiredBssType;
    MAC_COPY (pSme->tBssid, pModifiedInitParams->tDesiredBssid);

    pSme->tSsid.len = pModifiedInitParams->tDesiredSsid.len;
    if ( pSme->tSsid.len > MAX_SSID_LEN )
    {
        TRACE2( pSme->hReport, REPORT_SEVERITY_ERROR, "sme_SetDefaults. pSme->tSsid.len=%d exceeds the limit %d\n", pSme->tSsid.len, MAX_SSID_LEN);
        pSme->tSsid.len = MAX_SSID_LEN;
    }
    os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pModifiedInitParams->tDesiredSsid.str[ 0 ]), pSme->tSsid.len);
    if (OS_802_11_SSID_JUNK (pSme->tSsid.str, pSme->tSsid.len))
    {
        pSme->eSsidType = SSID_TYPE_INVALID;
        pSme->bConnectRequired = TI_FALSE;
    }
    else if (0 == pSme->tSsid.len)
    {
        pSme->eSsidType = SSID_TYPE_ANY;
        pSme->bConnectRequired = TI_TRUE;
    }
    else
    {
        pSme->eSsidType = SSID_TYPE_SPECIFIC;
        pSme->bConnectRequired = TI_TRUE;
    }

    pSme->eLastConnectMode = CONNECT_MODE_AUTO;
    pSme->bAuthSent = TI_FALSE;
    pSme->bReselect = TI_FALSE;
    pSme->uScanCount = 0;
    pSme->bRunning = TI_FALSE;

    /* Initialize the SME state-machine */
    genSM_SetDefaults (pSme->hSmeSm, SME_SM_NUMBER_OF_STATES, SME_SM_NUMBER_OF_EVENTS, (TGenSM_matrix)tSmMatrix,
                       SME_SM_STATE_IDLE, "SME SM", uStateDescription, uEventDescription, __FILE_ID__);

    /* register scan conecntrator CB */
    scanCncn_RegisterScanResultCB (pSme->hScanCncn, SCAN_SCC_DRIVER, sme_ScanResultCB, hSme);
}

/** 
 * \fn      sme_setScanResultTable
 * \brief   Sets the scanResultTable pointer for the manual mode.
 * \param   hSme - handle to the SME object
 * \param   hScanResultTable - pointer to ScanResultTable
 * \return  none
 */
void sme_SetScanResultTable(TI_HANDLE hSme, TI_HANDLE hScanResultTable)
{
    TSme        *pSme = (TSme*)hSme;

    pSme->hScanCncnScanResulTable = hScanResultTable;
    if (CONNECT_MODE_MANUAL == pSme->eConnectMode) 
    {
        pSme->hScanResultTable = pSme->hScanCncnScanResulTable;
    }
}

/** 
 * \fn     sme_Destroy
 * \brief  Destroys the SME object. De-allocates system resources
 * 
 * Destroys the SME object. De-allocates system resources
 * 
 * \param  hSme - handle to the SME object
 * \return None
 * \sa     sme_Create
 */ 
void sme_Destroy (TI_HANDLE hSme)
{
    TSme        *pSme = (TSme*)hSme;

    /* destroy the scan result table */
    if (NULL != pSme->hSmeScanResultTable)
    {
        scanResultTable_Destroy (pSme->hSmeScanResultTable);
    }

    /* destroy the SME generic state machine */
    if (NULL != pSme->hSmeSm)
    {
        genSM_Unload (pSme->hSmeSm);
    }

    /* free the SME object */
    os_memoryFree (pSme->hOS, hSme, sizeof (TSme));
}

/** 
 * \fn     sme_Start
 * \brief  Starts SME operation
 * 
 * Starts SME operation. Send probe request templates and send a start event to the SM.
 * Only the DrvMain module could & is call that function !!!
 * 
 * \param  hSme - handle to the SME object
 * \return None
 * \sa     sme_Stop
 */ 
void sme_Start (TI_HANDLE hSme)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Start: called, bRadioOn = %d\n", pSme->bRadioOn);

    pSme->bRunning = TI_TRUE;

    /* 
     * call setDefaultProbeReqTemplate at sme_Start() due to the fact in order to set prob req template 
     * all moudules need to be set already 
     */
    setDefaultProbeReqTemplate (pSme->hSiteMgr);

    /* if radio is on, start the SM */
    if (TI_TRUE == pSme->bRadioOn)
    {
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_START, hSme);
    }
}

/** 
 * \fn     sme_Stop
 * \brief  Stops the driver (shuts-down the radio)
 * 
 * Stops the driver (shuts-down the radio)
 * 
 * \param  hSme - handle to the SME object
 * \param  pCBFunc - callback function to be called when stop operation is doen
 * \param  hCBHanlde - handle to supply to the callback function
 * \return None
 * \sa     sme_Start
 */ 
void sme_Stop (TI_HANDLE hSme)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Stop called\n");

    pSme->bRunning = TI_FALSE;

    /* mark that running flag is send a stop event to the SM */
    sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_STOP, hSme);
}

/** 
 * \fn     sme_Restart
 * \brief  Called due to a paramter value change in site mgr. Triggers a disconnect.
 * 
 * Called due to a paramter value change in site mgr. Triggers a disconnect.
 * 
 * \param  hSme - handle to the SME object
 * \param  eReason - the reason for restarting the SME
 * \return None
 */ 
void sme_Restart (TI_HANDLE hSme)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Restart called.\n");

    pSme->uScanCount = 0;

    sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
}

/** 
 * \fn     sme_SetParam
 * \brief  Set parameters values
 * 
 * Set parameters values
 * 
 * \note   Note is indicated here 
 * \param  hSme - handle to the SME object
 * \param  pParam - pointer to the param to set
 * \return PARAM_NOT_SUPPORTED for an unrecognized parameter, TI_OK if successfull.
 * \sa     sme_GetParam
 */ 
TI_STATUS sme_SetParam (TI_HANDLE hSme, paramInfo_t *pParam)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_SetParam: param type is 0x%x\n", pParam->paramType);

    switch (pParam->paramType)
    {
    case SME_RADIO_ON_PARAM:
        /* if new value is different than current one */
        if (pSme->bRadioOn != pParam->content.smeRadioOn)
        {
            /* set new radio on value and send an event to the state-machine accordingly */
            pSme->bRadioOn = pParam->content.smeRadioOn;
            if (TI_TRUE == pSme->bRadioOn)
            {
                if(TI_TRUE == pSme->bRunning)
                {
                    sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_START, hSme);
                }
            }
            else
            {
                sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_STOP, hSme);
            }
        }
        break;

    case SME_DESIRED_SSID_PARAM:

        if (pParam->content.smeDesiredSSID.len > MAX_SSID_LEN)
        {
            return PARAM_VALUE_NOT_VALID;   /* SSID length is out of range */
        }

        /* if new value is different than current one */
        if ((pSme->tSsid.len != pParam->content.smeDesiredSSID.len) || 
            (0 != os_memoryCompare (pSme->hOS, (TI_UINT8 *)&(pSme->tSsid.str[ 0 ]),
                                    (TI_UINT8 *)&(pParam->content.smeDesiredSSID.str[ 0 ]), pSme->tSsid.len)))
        {
            /* set new desired SSID */
            os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pParam->content.smeDesiredSSID.str[ 0 ]), pParam->content.smeDesiredSSID.len);
            pSme->tSsid.len = pParam->content.smeDesiredSSID.len;

            pSme->uScanCount = 0;

            /* now send a disconnect event */
            sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        }
        break;

    case SME_DESIRED_SSID_ACT_PARAM:

        if (pParam->content.smeDesiredSSID.len > MAX_SSID_LEN)
        {
            return PARAM_VALUE_NOT_VALID;   /* SSID length is out of range */
        }

        pSme->bRadioOn = TI_TRUE;

        /* if new value is different than current one */
        if ((pSme->tSsid.len != pParam->content.smeDesiredSSID.len) || 
            (0 != os_memoryCompare (pSme->hOS, (TI_UINT8 *)&(pSme->tSsid.str[ 0 ]),
                                    (TI_UINT8 *)&(pParam->content.smeDesiredSSID.str[ 0 ]), pSme->tSsid.len)))
        {
            /* set new desired SSID */
            os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pParam->content.smeDesiredSSID.str[ 0 ]), pParam->content.smeDesiredSSID.len);
            pSme->tSsid.len = pParam->content.smeDesiredSSID.len;
        }
        /* also set SSID type and connect required flag */
        if (OS_802_11_SSID_JUNK (pSme->tSsid.str, pSme->tSsid.len))
        {
            pSme->eSsidType = SSID_TYPE_INVALID;
            pSme->bConnectRequired = TI_FALSE;
        }
        else if (0 == pSme->tSsid.len)
        {
            pSme->eSsidType = SSID_TYPE_ANY;
            pSme->bConnectRequired = TI_TRUE;
        }
        else
        {
            pSme->eSsidType = SSID_TYPE_SPECIFIC;
            pSme->bConnectRequired = TI_TRUE;
        }
        pSme->uScanCount = 0;

        /* if  junk SSID */
        if(TI_FALSE == pSme->bConnectRequired)
        {
            pSme->bConstantScan = TI_FALSE;
        }

        /* now send a disconnect event */
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        break;

    case SME_DESIRED_BSSID_PARAM:
        /* if new value is different than current one */
        if (TI_FALSE == MAC_EQUAL (pSme->tBssid, pParam->content.smeDesiredBSSID))
        {
            /* set new BSSID */
            MAC_COPY (pSme->tBssid, pParam->content.smeDesiredBSSID);
            pSme->uScanCount = 0;
            /* now send a disconnect event */
            sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        }
        break;

    case SME_CONNECTION_MODE_PARAM:
        /* if new value is different than current one */
        if (pSme->eConnectMode != pParam->content.smeConnectionMode)
        {
            /* set new connection mode */
            pSme->eConnectMode = pParam->content.smeConnectionMode;
            pSme->uScanCount = 0;
            if (CONNECT_MODE_AUTO == pSme->eConnectMode)
            {
                pSme->hScanResultTable = pSme->hSmeScanResultTable;
            }
            else if (CONNECT_MODE_MANUAL == pSme->eConnectMode) 
            {
                pSme->hScanResultTable = pSme->hScanCncnScanResulTable;
            }
        /* now send a disconnect event */
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        }
        break;

    case SME_DESIRED_BSS_TYPE_PARAM:
        /* if new value is different than current one */
        if (pSme->eBssType != pParam->content.smeDesiredBSSType)
        {
            /* set new BSS type */
            pSme->eBssType = pParam->content.smeDesiredBSSType;
            pSme->uScanCount = 0;
            /* now send a disconnect event */
            sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        }
        break;

    case SME_WSC_PB_MODE_PARAM:

        if (pParam->content.siteMgrWSCMode.WSCMode != TIWLN_SIMPLE_CONFIG_OFF)
        {
         pSme->bConstantScan = TI_TRUE;
         pSme->uScanCount = 0;
         /* now send a disconnect event */
         sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        }
        else
        {
         pSme->bConstantScan = TI_FALSE;
        }
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_SetParam: unrecognized param type %d\n", pParam->paramType);
        return PARAM_NOT_SUPPORTED;
        /* break;*/
    }

    return TI_OK;
}

/**
 * \fn     sme_GetParam
 * \brief  Retrieves a parameter from the SME
 * 
 * Retrieves a parameter from the SME
 * 
 * \param  hSme - handle to the SME object
 * \param  pParam - pointer to the param to retrieve
 * \return PARAM_NOT_SUPPORTED for an unrecognized parameter, TI_OK if successfull.
 * \sa     sme_SetParam
 */ 
TI_STATUS sme_GetParam (TI_HANDLE hSme, paramInfo_t *pParam)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_GetParam: param type is 0x%x\n", pParam->paramType);

    switch (pParam->paramType)
    {
    case SME_RADIO_ON_PARAM:
        pParam->content.smeRadioOn = pSme->bRadioOn;
        break;

    case SME_DESIRED_SSID_ACT_PARAM:
        pParam->content.smeDesiredSSID.len = pSme->tSsid.len;
        os_memoryCopy (pSme->hOS, &(pParam->content.smeDesiredSSID.str[ 0 ]), 
                       &(pSme->tSsid.str[ 0 ]), pSme->tSsid.len);
        break;

    case SME_DESIRED_BSSID_PARAM:
        MAC_COPY (pParam->content.smeDesiredBSSID, pSme->tBssid);
        break;

    case SME_CONNECTION_MODE_PARAM:
        pParam->content.smeConnectionMode = pSme->eConnectMode;
        break;

    case SME_DESIRED_BSS_TYPE_PARAM:
        pParam->content.smeDesiredBSSType = pSme->eBssType;
        break;

    case SME_CONNECTION_STATUS_PARAM:
        switch (genSM_GetCurrentState (pSme->hSmeSm))
        {
        case SME_SM_STATE_IDLE:
            pParam->content.smeSmConnectionStatus = eDot11RadioDisabled;
            break;
        case SME_SM_STATE_WAIT_CONNECT:
            pParam->content.smeSmConnectionStatus = eDot11Disassociated;
            break;
        case SME_SM_STATE_SCANNING:
            pParam->content.smeSmConnectionStatus = eDot11Scaning;
            break;
        case SME_SM_STATE_CONNECTING:
            pParam->content.smeSmConnectionStatus = eDot11Connecting;
            break;
        case SME_SM_STATE_CONNECTED:
            pParam->content.smeSmConnectionStatus = eDot11Associated;
            break;
        case SME_SM_STATE_DISCONNECTING:
            pParam->content.smeSmConnectionStatus = eDot11Disassociated;
            break;
        }
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_GetParam: unrecognized param type %d\n", pParam->paramType);
        return PARAM_NOT_SUPPORTED;
        /* break;*/
    }

    return TI_OK;
}

/** 
 * \fn     sme_ScanResultCB
 * \brief  Callback function from scan concentrator for results and scan complete indications
 * 
 * Callback function from scan concentrator for results and scan complete indications
 * 
 * \param  hSme - handle to the SME object
 * \param  eStatus - the reason for calling the CB  
 * \param  pFrameInfo - frame information (if the CB is called due to received frame)
 * \param  uSPSStatus - SPS attened channels (if the CB is called to inidcate an SPS scan complete)
 * \return None
 */ 
void sme_ScanResultCB (TI_HANDLE hSme, EScanCncnResultStatus eStatus,
                       TScanFrameInfo* pFrameInfo, TI_UINT16 uSPSStatus)
{
    TSme                *pSme = (TSme*)hSme;
    paramInfo_t	        param;

    switch (eStatus)
    {
    /* a frame was received - update the scan result table */
    case SCAN_CRS_RECEIVED_FRAME:
        TRACE6(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received frame from BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);

        /* 
         * in auto mode in order to find country IE only !!!
         * filter frames according to desired SSID, in case we are also trying to find 
         * country IE in passive scan, to avoid a table overflow (in manual mode, the SME table must be equal to the app
         * table, the app is responsible to decide which SSIDs to use for scan)
         */
        if (CONNECT_MODE_AUTO == pSme->eConnectMode)
        {
            if (SSID_TYPE_SPECIFIC == pSme->eSsidType)
            {
#ifndef XCC_MODULE_INCLUDED
                if ((pSme->tSsid.len == pFrameInfo->parsedIEs->content.iePacket.pSsid->hdr[ 1 ]) &&
                    (0 == os_memoryCompare (pSme->hOS, (TI_UINT8 *)&(pSme->tSsid.str[ 0 ]),
                                            (TI_UINT8 *)&(pFrameInfo->parsedIEs->content.iePacket.pSsid->serviceSetId[ 0 ]),
                                            pSme->tSsid.len)))
#endif
                {
                    if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo))
                    {
                        TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update specific entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);
                    }
                }
            }
            else
            {
                if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo))
                {
                    TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x because table is full\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);
                }
            }
        }
        else
        /* manual mode */
        {
            if (TI_OK != scanResultTable_UpdateEntry (pSme->hSmeScanResultTable, pFrameInfo->bssId, pFrameInfo))
            {
                TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update application scan entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);
            }
        }
        break;

    /* scan was completed successfully */
    case SCAN_CRS_SCAN_COMPLETE_OK:
    /* an error occured, try selecting a site anyway */
    case SCAN_CRS_SCAN_ABORTED_FW_RESET:
    case SCAN_CRS_SCAN_ABORTED_HIGHER_PRIORITY:
    case SCAN_CRS_SCAN_FAILED:
    case SCAN_CRS_TSF_ERROR:
        TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received scan complete indication with status %d\n", eStatus);

        /* stablizie the scan result table - delete its contenst if no results were recived during last scan */
        scanResultTable_SetStableState (pSme->hScanResultTable);

        if (CONNECT_MODE_AUTO == pSme->eConnectMode)
        {
 
           /* try to select a site */
           pSme->pCandidate = sme_Select (hSme);

           /* if no matching site was found */
           if (NULL == pSme->pCandidate)
           {
               /* for IBSS or any, if no entries where found, add the self site */
               if (pSme->eBssType == BSS_INFRASTRUCTURE)
               {
                   TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: No candidate available, sending connect failure\n");

                   sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
                   break;
               }

               {
                   TI_UINT8     uDesiredChannel;

                   param.paramType = SITE_MGR_DESIRED_CHANNEL_PARAM;
                   siteMgr_getParam(pSme->hSiteMgr, &param);
                   uDesiredChannel = param.content.siteMgrDesiredChannel;

                   if (uDesiredChannel >= SITE_MGR_CHANNEL_A_MIN)
                   {
                       param.content.channelCapabilityReq.band = RADIO_BAND_5_0_GHZ;
                   } 
                   else 
                   {
                       param.content.channelCapabilityReq.band = RADIO_BAND_2_4_GHZ;
                   }

                   /*
                   update the regulatory domain with the selected band
                   */
                   /* Check if the selected channel is valid according to regDomain */
                   param.paramType = REGULATORY_DOMAIN_GET_SCAN_CAPABILITIES;
                   param.content.channelCapabilityReq.scanOption = ACTIVE_SCANNING;
                   param.content.channelCapabilityReq.channelNum = uDesiredChannel;

                   regulatoryDomain_getParam (pSme->hRegDomain,&param);
                   if (!param.content.channelCapabilityRet.channelValidity)
                   {
                       TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "IBSS SELECT FAILURE  - No channel !!!\n\n");

                       sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);

                       break;
                   }

                   pSme->pCandidate = (TSiteEntry *)addSelfSite(pSme->hSiteMgr);

                   if (pSme->pCandidate == NULL)
                   {
                       TRACE0(pSme->hReport, REPORT_SEVERITY_ERROR , "IBSS SELECT FAILURE  - could not open self site !!!\n\n");

                       sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);

                       break;
                   }

#ifdef REPORT_LOG    
                   TRACE6(pSme->hReport, REPORT_SEVERITY_CONSOLE,"%%%%%%%%%%%%%%	SELF SELECT SUCCESS, bssid: %X-%X-%X-%X-%X-%X	%%%%%%%%%%%%%%\n\n", pSme->pCandidate->bssid[0], pSme->pCandidate->bssid[1], pSme->pCandidate->bssid[2], pSme->pCandidate->bssid[3], pSme->pCandidate->bssid[4], pSme->pCandidate->bssid[5]);
                   WLAN_OS_REPORT (("%%%%%%%%%%%%%%	SELF SELECT SUCCESS, bssid: %02x.%02x.%02x.%02x.%02x.%02x %%%%%%%%%%%%%%\n\n", pSme->pCandidate->bssid[0], pSme->pCandidate->bssid[1], pSme->pCandidate->bssid[2], pSme->pCandidate->bssid[3], pSme->pCandidate->bssid[4], pSme->pCandidate->bssid[5]));
#endif
                }
           }

           /* a connection candidate is available, send a connect event */
           sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT, hSme);
        }
        break;        

    /*
     * scan was stopped according to SME request (should happen when moving to disconnecting from scanning), send a 
     * connect failure event to move out of disconnecting
     */
    case SCAN_CRS_SCAN_STOPPED:
        TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received scan stopped indication\n");
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: received unrecognized status %d\n", eStatus);
        break;
    }
}

/** 
 * \fn     sme_MeansurementScanResult
 * \brief  Callback function from Meansurement for results
 * 
 * Callback function from Meansurement for results used for scans wehen the SME is in Meansurement.
 * 
 * \param  hSme - handle to the SME object
 * \param  pFrameInfo - frame information (if the CB is called due to received frame)
 * \return None
 */ 
void sme_MeansurementScanResult (TI_HANDLE hSme, EScanCncnResultStatus eStatus, TScanFrameInfo* pFrameInfo)
{
    TSme                *pSme = (TSme*)hSme;

    switch (eStatus)
    {
    /* a frame was received - update the scan result table */
    case SCAN_CRS_RECEIVED_FRAME:
        TRACE6(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_MeansurementScanResult: received frame from BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);
    
        if (TI_OK != scanResultTable_UpdateEntry (pSme->hSmeScanResultTable, pFrameInfo->bssId, pFrameInfo))
        {
            TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_MeansurementScanResult: unable to update entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x because table is full\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]);
        }
        break;

    /* scan was completed successfully */
    case SCAN_CRS_SCAN_COMPLETE_OK:
    /* an error occured, try selecting a site anyway */
    case SCAN_CRS_SCAN_ABORTED_FW_RESET:
    case SCAN_CRS_SCAN_STOPPED:
    case SCAN_CRS_SCAN_ABORTED_HIGHER_PRIORITY:
    case SCAN_CRS_SCAN_FAILED:
    case SCAN_CRS_TSF_ERROR:
        TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_MeansurementScanResult: received scan complete indication with status %d\n", eStatus);

        /* stablizie the scan result table - delete its contenst if no results were recived during last scan */
        scanResultTable_SetStableState (pSme->hSmeScanResultTable);
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_AppScanResult: received unrecognized status %d\n", eStatus);
        break;
    }
 
}


/** 
 * \fn     Function declaration 
 * \brief  Function brief description goes here 
 * 
 * Function detailed description goes here 
 * 
 * \note   Note is indicated here 
 * \param  Parameter name - parameter description
 * \param  … 
 * \return Return code is detailed here 
 * \sa     Reference to other relevant functions 
 */
void sme_ReportConnStatus (TI_HANDLE hSme, mgmtStatus_e eStatusType, TI_UINT32 uStatusCode)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE2(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ReportConnStatus: statusType = %d, uStatusCode = %d\n", eStatusType, uStatusCode);

    /* Act according to status */
    switch (eStatusType)
    {
    /* connection was successful */
    case STATUS_SUCCESSFUL:
        pSme->bAuthSent = TI_TRUE;
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_SUCCESS, hSme);
        break;

    case STATUS_ASSOC_REJECT:
    case STATUS_SECURITY_FAILURE:
    case STATUS_AP_DEAUTHENTICATE:
    case STATUS_AP_DISASSOCIATE:
    case STATUS_ROAMING_TRIGGER:
    case STATUS_AUTH_REJECT:
        /* Indicate the authentication and/or association was sent to the AP */
        pSme->bAuthSent = TI_TRUE;

        /* keep the disassociation status and code, for sending event to user-mode */
        pSme->tDisAssoc.eMgmtStatus = eStatusType;
        pSme->tDisAssoc.uStatusCode = uStatusCode;

        /* try to find the next connection candidate */
        pSme->pCandidate = sme_Select (hSme);
        /* if the next connection candidate exists */
        if (NULL != pSme->pCandidate)
        {
            sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT, hSme);
        }
        else
        {
            sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
        }
        break;

        /* Note that in case of unspecified status we won't update the status. This is done since this function could be called twice */
        /* for example: apConn called this function and than SME called conn_stop and this function is called again                   */
        /* we use this status at SME, if != 0 means that assoc frame sent */
    case STATUS_UNSPECIFIED:
            pSme->bAuthSent = TI_TRUE;
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportConnStatus: unknown statusType = %d\n", eStatusType);
        break;
    }
}

/** 
 * \fn     sme_ReportApConnStatus
 * \brief  Used by AP connection (and Soft-gemini) modules to report connection status
 * 
 * Used by AP connection (and Soft-gemini) modules to report connection status
 * 
 * \param  hSme - handle to the SME object
 * \param  eStatusType - connection status
 * \param  uStatus code - extended status information (if available)
 * \return None
 * \sa     sme_ReportConnStatus
 */
void sme_ReportApConnStatus (TI_HANDLE hSme, mgmtStatus_e eStatusType, TI_UINT32 uStatusCode)
{
    TSme                *pSme = (TSme*)hSme;

    TRACE2(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ReportApConnStatus: statusType = %d, uStatusCode = %d\n", eStatusType, uStatusCode);

    /* Act according to status */
    switch (eStatusType)
    {

    /* SG re-select */
    case STATUS_SG_RESELECT:
        pSme->bReselect = TI_TRUE;
        pSme->bConnectRequired = TI_TRUE;
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
        break;

    /* shouldn't happen (not from AP conn) */
    case STATUS_SUCCESSFUL:
        TRACE0(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportApConnStatus: received STATUS_SUCCESSFUL\n");
        break;

    case STATUS_UNSPECIFIED:
    case STATUS_AUTH_REJECT:
    case STATUS_ASSOC_REJECT:
    case STATUS_SECURITY_FAILURE:
    case STATUS_AP_DEAUTHENTICATE:
    case STATUS_AP_DISASSOCIATE:
    case STATUS_ROAMING_TRIGGER:
       
        /* keep the disassociation status and code, for sending event to user-mode */
        pSme->tDisAssoc.eMgmtStatus = eStatusType;
        pSme->tDisAssoc.uStatusCode = uStatusCode;
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme);
        break;

    case STATUS_DISCONNECT_DURING_CONNECT:
        sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
        break;

    default:
        TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportApConnStatus: received unrecognized status: %d\n", eStatusType);

    }
}

/** 
 * \fn     sme_ConnectScanReport
 * \brief  get the handler to the Scan Result Table used for connection to AP.
 * 
 * \param  hSme - handle to the SME object
 * \param  uStatus code - extended status information (if available)
 * \return None
 */
void sme_ConnectScanReport (TI_HANDLE hSme, TI_HANDLE *hScanResultTable)
{
    TSme                *pSme = (TSme*)hSme;

    *hScanResultTable = pSme->hScanResultTable;
}

/** 
 * \fn     sme_MeasureScanReport
 * \brief  get the handler to the Sme Scan Result Table.
 * 
 * \param  hSme - handle to the SME object
 * \param  uStatus code - extended status information (if available)
 * \return None
 */
void sme_MeasureScanReport (TI_HANDLE hSme, TI_HANDLE *hScanResultTable)
{
    TSme                *pSme = (TSme*)hSme;

    *hScanResultTable = pSme->hSmeScanResultTable;
}


/** 
 * \fn     SME_ConnectRequired
 * \brief  start connection sequence by set the flag ConnectRequired and issue DISCONNECT event.
 *         called by CommandDispatcher in OSE OS.
 * 
 * \param  hSme - handle to the SME object
 * \return None
 * \sa     SME_Disconnect
 */
void SME_ConnectRequired (TI_HANDLE hSme)
{
    TSme *pSme = (TSme*)hSme;

    pSme->bRadioOn = TI_TRUE;
    pSme->uScanCount = 0;
    pSme->bConnectRequired = TI_TRUE;

    /* now send a disconnect event */
    sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
}

/** 
 * \fn     SME_Disconnect
 * \brief  perform disconnect by clear the flag ConnectRequired and issue DISCONNECT event.
 * 
 * \param  hSme - handle to the SME object
 * \return None
 * \sa     SME_ConnectRequired
 */
void SME_Disconnect (TI_HANDLE hSme)
{
    TSme *pSme = (TSme*)hSme;

    pSme->bConnectRequired = TI_FALSE;
    /* turn off WSC PB mode */
    pSme->bConstantScan = TI_FALSE;

    /* now send a disconnect event */
    sme_SmEvent (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme);
}

void sme_SmEvent(TI_HANDLE hGenSm, TI_UINT32 uEvent, void* pData)
{
    TSme *pSme = (TSme*)pData;
    TGenSM    *pGenSM = (TGenSM*)hGenSm;

    TRACE2(pSme->hReport, REPORT_SEVERITY_INFORMATION, "sme_SmEvent: Current State = %d, sending event %d\n", (pGenSM->uCurrentState), (uEvent));
    genSM_Event(pGenSM, uEvent, pData);
}