Merge "Add b5r3 perf setup script" into rvc-d1-dev

1 files changed, 84 insertions, 0 deletions

diff --git a/scripts/perf-setup/b5r3-setup.sh b/scripts/perf-setup/b5r3-setup.sh
new file mode 100755
index 000000000..d02ee0771
--- /dev/null
+++ b/scripts/perf-setup/b5r3-setup.sh
@@ -0,0 +1,84 @@
+#!/system/bin/sh
+#
+# Copyright (C) 2020 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# performance test setup for 2020 devices
+function disable_thermal()
+{
+    thermal_path='/sys/devices/virtual/thermal/'
+
+    nz=$(ls -al $thermal_path | grep thermal_zone | wc -l)
+    i=0
+    while [ $i -lt $nz ]; do
+        tz_path=$thermal_path'thermal_zone'$i'/'
+        mode_path=$tz_path'mode'
+
+        if [ -f $mode_path ]; then
+            echo disabled > $tz_path'mode'
+        fi
+        i=$(($i + 1));
+    done
+}
+
+disable_thermal
+setprop vendor.powerhal.init 0
+setprop ctl.restart vendor.power-hal-aidl
+
+cpubase=/sys/devices/system/cpu
+gov=cpufreq/scaling_governor
+
+cpu=6
+top=8
+#Big Core 652800  940800 1152000 1478400 1728000 1900800 2092800 2208000
+#Big Plus 806400 1094400 1401600 1766400 1996800 2188800 2304000 2400000
+cpufreq=2092800
+# Set the bigcores around 2G
+while [ $((cpu < $top)) -eq 1 ]; do
+  echo 1 > $cpubase/cpu${cpu}/online
+  echo userspace > $cpubase/cpu${cpu}/$gov
+  echo $cpufreq > /sys/devices/system/cpu/cpu$cpu/cpufreq/scaling_max_freq
+  echo $cpufreq > /sys/devices/system/cpu/cpu$cpu/cpufreq/scaling_setspeed
+  S=`cat $cpubase/cpu${cpu}/cpufreq/scaling_cur_freq`
+  echo "set cpu $cpu to $S kHz"
+  cpu=$(($cpu + 1))
+done
+
+cpu=0
+top=6
+# Disable the silver cores.
+while [ $((cpu < $top)) -eq 1 ]; do
+  echo "disable cpu $cpu"
+  echo 0 > $cpubase/cpu${cpu}/online
+  cpu=$(($cpu + 1))
+done
+
+echo "disable GPU bus split"
+echo 0 > /sys/class/kgsl/kgsl-3d0/bus_split
+echo "enable GPU force clock on"
+echo 1 > /sys/class/kgsl/kgsl-3d0/force_clk_on
+echo "set GPU idle timer to 10000"
+echo 10000 > /sys/class/kgsl/kgsl-3d0/idle_timer
+
+# 0 381 572 762 1144 1571 2086 2597 2929 3879 4943 5931 6881
+echo performance > /sys/class/devfreq/soc:qcom,gpubw/governor
+echo -n "set GPU bus frequency to max at "
+cat /sys/class/devfreq/soc:qcom,gpubw/cur_freq
+
+#625 500 400 275 mhz
+echo performance > /sys/class/kgsl/kgsl-3d0/devfreq/governor
+echo 0 > /sys/class/kgsl/kgsl-3d0/max_pwrlevel
+echo 0 > /sys/class/kgsl/kgsl-3d0/min_pwrlevel
+echo -n "set GPU frequency to max at "
+cat /sys/class/kgsl/kgsl-3d0/devfreq/cur_freq