diff options
Diffstat (limited to 'share/cmake-3.6/Modules/GNUInstallDirs.cmake')
| -rw-r--r-- | share/cmake-3.6/Modules/GNUInstallDirs.cmake | 354 |
1 files changed, 0 insertions, 354 deletions
diff --git a/share/cmake-3.6/Modules/GNUInstallDirs.cmake b/share/cmake-3.6/Modules/GNUInstallDirs.cmake deleted file mode 100644 index b42084e..0000000 --- a/share/cmake-3.6/Modules/GNUInstallDirs.cmake +++ /dev/null @@ -1,354 +0,0 @@ -#.rst: -# GNUInstallDirs -# -------------- -# -# Define GNU standard installation directories -# -# Provides install directory variables as defined by the -# `GNU Coding Standards`_. -# -# .. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html -# -# Result Variables -# ^^^^^^^^^^^^^^^^ -# -# Inclusion of this module defines the following variables: -# -# ``CMAKE_INSTALL_<dir>`` -# -# Destination for files of a given type. This value may be passed to -# the ``DESTINATION`` options of :command:`install` commands for the -# corresponding file type. -# -# ``CMAKE_INSTALL_FULL_<dir>`` -# -# The absolute path generated from the corresponding ``CMAKE_INSTALL_<dir>`` -# value. If the value is not already an absolute path, an absolute path -# is constructed typically by prepending the value of the -# :variable:`CMAKE_INSTALL_PREFIX` variable. However, there are some -# `special cases`_ as documented below. -# -# where ``<dir>`` is one of: -# -# ``BINDIR`` -# user executables (``bin``) -# ``SBINDIR`` -# system admin executables (``sbin``) -# ``LIBEXECDIR`` -# program executables (``libexec``) -# ``SYSCONFDIR`` -# read-only single-machine data (``etc``) -# ``SHAREDSTATEDIR`` -# modifiable architecture-independent data (``com``) -# ``LOCALSTATEDIR`` -# modifiable single-machine data (``var``) -# ``LIBDIR`` -# object code libraries (``lib`` or ``lib64`` -# or ``lib/<multiarch-tuple>`` on Debian) -# ``INCLUDEDIR`` -# C header files (``include``) -# ``OLDINCLUDEDIR`` -# C header files for non-gcc (``/usr/include``) -# ``DATAROOTDIR`` -# read-only architecture-independent data root (``share``) -# ``DATADIR`` -# read-only architecture-independent data (``DATAROOTDIR``) -# ``INFODIR`` -# info documentation (``DATAROOTDIR/info``) -# ``LOCALEDIR`` -# locale-dependent data (``DATAROOTDIR/locale``) -# ``MANDIR`` -# man documentation (``DATAROOTDIR/man``) -# ``DOCDIR`` -# documentation root (``DATAROOTDIR/doc/PROJECT_NAME``) -# -# If the includer does not define a value the above-shown default will be -# used and the value will appear in the cache for editing by the user. -# -# Special Cases -# ^^^^^^^^^^^^^ -# -# The following values of :variable:`CMAKE_INSTALL_PREFIX` are special: -# -# ``/`` -# -# For ``<dir>`` other than the ``SYSCONFDIR`` and ``LOCALSTATEDIR``, -# the value of ``CMAKE_INSTALL_<dir>`` is prefixed with ``usr/`` if -# it is not user-specified as an absolute path. For example, the -# ``INCLUDEDIR`` value ``include`` becomes ``usr/include``. -# This is required by the `GNU Coding Standards`_, which state: -# -# When building the complete GNU system, the prefix will be empty -# and ``/usr`` will be a symbolic link to ``/``. -# -# ``/usr`` -# -# For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the -# ``CMAKE_INSTALL_FULL_<dir>`` is computed by prepending just ``/`` -# to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified -# as an absolute path. For example, the ``SYSCONFDIR`` value ``etc`` -# becomes ``/etc``. This is required by the `GNU Coding Standards`_. -# -# ``/opt/...`` -# -# For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the -# ``CMAKE_INSTALL_FULL_<dir>`` is computed by *appending* the prefix -# to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified -# as an absolute path. For example, the ``SYSCONFDIR`` value ``etc`` -# becomes ``/etc/opt/...``. This is defined by the -# `Filesystem Hierarchy Standard`_. -# -# .. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html - -#============================================================================= -# Copyright 2015 Alex Turbov <i.zaufi@gmail.com> -# Copyright 2011 Nikita Krupen'ko <krnekit@gmail.com> -# Copyright 2011 Kitware, Inc. -# -# Distributed under the OSI-approved BSD License (the "License"); -# see accompanying file Copyright.txt for details. -# -# This software is distributed WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# See the License for more information. -#============================================================================= -# (To distribute this file outside of CMake, substitute the full -# License text for the above reference.) - -# Installation directories -# -if(NOT DEFINED CMAKE_INSTALL_BINDIR) - set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_SBINDIR) - set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR) - set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR) - set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR) - set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR) - set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)") -endif() - -# We check if the variable was manually set and not cached, in order to -# allow projects to set the values as normal variables before including -# GNUInstallDirs to avoid having the entries cached or user-editable. It -# replaces the "if(NOT DEFINED CMAKE_INSTALL_XXX)" checks in all the -# other cases. -# If CMAKE_INSTALL_LIBDIR is defined, if _libdir_set is false, then the -# variable is a normal one, otherwise it is a cache one. -get_property(_libdir_set CACHE CMAKE_INSTALL_LIBDIR PROPERTY TYPE SET) -if(NOT DEFINED CMAKE_INSTALL_LIBDIR OR (_libdir_set - AND DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX - AND NOT "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" STREQUAL "${CMAKE_INSTALL_PREFIX}")) - # If CMAKE_INSTALL_LIBDIR is not defined, it is always executed. - # Otherwise: - # * if _libdir_set is false it is not executed (meaning that it is - # not a cache variable) - # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is not defined it is - # not executed - # * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX and - # CMAKE_INSTALL_PREFIX are the same string it is not executed. - # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is updated after the - # execution, of this part of code, therefore at the next inclusion - # of the file, CMAKE_INSTALL_LIBDIR is defined, and the 2 strings - # are equal, meaning that the if is not executed the code the - # second time. - - set(_LIBDIR_DEFAULT "lib") - # Override this default 'lib' with 'lib64' iff: - # - we are on Linux system but NOT cross-compiling - # - we are NOT on debian - # - we are on a 64 bits system - # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf - # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if - # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu" - # and CMAKE_INSTALL_PREFIX is "/usr" - # See http://wiki.debian.org/Multiarch - if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) - set(__LAST_LIBDIR_DEFAULT "lib") - # __LAST_LIBDIR_DEFAULT is the default value that we compute from - # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX, not a cache entry for - # the value that was last used as the default. - # This value is used to figure out whether the user changed the - # CMAKE_INSTALL_LIBDIR value manually, or if the value was the - # default one. When CMAKE_INSTALL_PREFIX changes, the value is - # updated to the new default, unless the user explicitly changed it. - endif() - if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$" - AND NOT CMAKE_CROSSCOMPILING) - if (EXISTS "/etc/debian_version") # is this a debian system ? - if(CMAKE_LIBRARY_ARCHITECTURE) - if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$") - set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") - endif() - if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX - AND "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$") - set(__LAST_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") - endif() - endif() - else() # not debian, rely on CMAKE_SIZEOF_VOID_P: - if(NOT DEFINED CMAKE_SIZEOF_VOID_P) - message(AUTHOR_WARNING - "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. " - "Please enable at least one language before including GNUInstallDirs.") - else() - if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8") - set(_LIBDIR_DEFAULT "lib64") - if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX) - set(__LAST_LIBDIR_DEFAULT "lib64") - endif() - endif() - endif() - endif() - endif() - if(NOT DEFINED CMAKE_INSTALL_LIBDIR) - set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})") - elseif(DEFINED __LAST_LIBDIR_DEFAULT - AND "${__LAST_LIBDIR_DEFAULT}" STREQUAL "${CMAKE_INSTALL_LIBDIR}") - set_property(CACHE CMAKE_INSTALL_LIBDIR PROPERTY VALUE "${_LIBDIR_DEFAULT}") - endif() -endif() -# Save for next run -set(_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "CMAKE_INSTALL_PREFIX during last run") -unset(_libdir_set) -unset(__LAST_LIBDIR_DEFAULT) - - -if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR) - set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR) - set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)") -endif() - -if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR) - set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)") -endif() - -#----------------------------------------------------------------------------- -# Values whose defaults are relative to DATAROOTDIR. Store empty values in -# the cache and store the defaults in local variables if the cache values are -# not set explicitly. This auto-updates the defaults as DATAROOTDIR changes. - -if(NOT CMAKE_INSTALL_DATADIR) - set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)") - set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}") -endif() - -if(CMAKE_SYSTEM_NAME STREQUAL "OpenBSD") - if(NOT CMAKE_INSTALL_INFODIR) - set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (info)") - set(CMAKE_INSTALL_INFODIR "info") - endif() - - if(NOT CMAKE_INSTALL_MANDIR) - set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (man)") - set(CMAKE_INSTALL_MANDIR "man") - endif() -else() - if(NOT CMAKE_INSTALL_INFODIR) - set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)") - set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info") - endif() - - if(NOT CMAKE_INSTALL_MANDIR) - set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)") - set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man") - endif() -endif() - -if(NOT CMAKE_INSTALL_LOCALEDIR) - set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)") - set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale") -endif() - -if(NOT CMAKE_INSTALL_DOCDIR) - set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)") - set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}") -endif() - -#----------------------------------------------------------------------------- - -mark_as_advanced( - CMAKE_INSTALL_BINDIR - CMAKE_INSTALL_SBINDIR - CMAKE_INSTALL_LIBEXECDIR - CMAKE_INSTALL_SYSCONFDIR - CMAKE_INSTALL_SHAREDSTATEDIR - CMAKE_INSTALL_LOCALSTATEDIR - CMAKE_INSTALL_LIBDIR - CMAKE_INSTALL_INCLUDEDIR - CMAKE_INSTALL_OLDINCLUDEDIR - CMAKE_INSTALL_DATAROOTDIR - CMAKE_INSTALL_DATADIR - CMAKE_INSTALL_INFODIR - CMAKE_INSTALL_LOCALEDIR - CMAKE_INSTALL_MANDIR - CMAKE_INSTALL_DOCDIR - ) - -# Result directories -# -foreach(dir - BINDIR - SBINDIR - LIBEXECDIR - SYSCONFDIR - SHAREDSTATEDIR - LOCALSTATEDIR - LIBDIR - INCLUDEDIR - OLDINCLUDEDIR - DATAROOTDIR - DATADIR - INFODIR - LOCALEDIR - MANDIR - DOCDIR - ) - if(NOT IS_ABSOLUTE "${CMAKE_INSTALL_${dir}}") - # Handle special cases: - # - CMAKE_INSTALL_PREFIX == / - # - CMAKE_INSTALL_PREFIX == /usr - # - CMAKE_INSTALL_PREFIX == /opt/... - if("${CMAKE_INSTALL_PREFIX}" STREQUAL "/") - if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR") - set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}") - else() - if (NOT "${CMAKE_INSTALL_${dir}}" MATCHES "^usr/") - set(CMAKE_INSTALL_${dir} "usr/${CMAKE_INSTALL_${dir}}") - endif() - set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}") - endif() - elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$") - if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR") - set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}") - else() - set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") - endif() - elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/opt/.*") - if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR") - set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}${CMAKE_INSTALL_PREFIX}") - else() - set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") - endif() - else() - set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") - endif() - else() - set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}") - endif() -endforeach() |