diff options
Diffstat (limited to 'share/cmake-3.2/Modules/CPackRPM.cmake')
-rwxr-xr-x | share/cmake-3.2/Modules/CPackRPM.cmake | 1323 |
1 files changed, 0 insertions, 1323 deletions
diff --git a/share/cmake-3.2/Modules/CPackRPM.cmake b/share/cmake-3.2/Modules/CPackRPM.cmake deleted file mode 100755 index e3f74d8..0000000 --- a/share/cmake-3.2/Modules/CPackRPM.cmake +++ /dev/null @@ -1,1323 +0,0 @@ -#.rst: -# CPackRPM -# -------- -# -# The builtin (binary) CPack RPM generator (Unix only) -# -# Variables specific to CPack RPM generator -# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -# -# CPackRPM may be used to create RPM package using CPack. CPackRPM is a -# CPack generator thus it uses the CPACK_XXX variables used by CPack : -# http://www.cmake.org/Wiki/CMake:CPackConfiguration -# -# However CPackRPM has specific features which are controlled by the -# specifics CPACK_RPM_XXX variables. CPackRPM is a component aware -# generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more -# CPACK_RPM_<ComponentName>_XXXX variables may be used in order to have -# component specific values. Note however that <componentName> refers -# to the **grouping name**. This may be either a component name or a -# component GROUP name. Usually those vars correspond to RPM spec file -# entities, one may find information about spec files here -# http://www.rpm.org/wiki/Docs. You'll find a detailed usage of -# CPackRPM on the wiki: -# -# :: -# -# http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 -# -# However as a handy reminder here comes the list of specific variables: -# -# .. variable:: CPACK_RPM_PACKAGE_SUMMARY -# CPACK_RPM_<component>_PACKAGE_SUMMARY -# -# The RPM package summary. -# -# * Mandatory : YES -# * Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY -# -# .. variable:: CPACK_RPM_PACKAGE_NAME -# -# The RPM package name. -# -# * Mandatory : YES -# * Default : CPACK_PACKAGE_NAME -# -# .. variable:: CPACK_RPM_PACKAGE_VERSION -# -# The RPM package version. -# -# * Mandatory : YES -# * Default : CPACK_PACKAGE_VERSION -# -# .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE -# -# The RPM package architecture. -# -# * Mandatory : NO -# * Default : - -# -# This may be set to "noarch" if you know you are building a noarch package. -# -# .. variable:: CPACK_RPM_PACKAGE_RELEASE -# -# The RPM package release. -# -# * Mandatory : YES -# * Default : 1 -# -# This is the numbering of the RPM package itself, i.e. the version of the -# packaging and not the version of the content (see -# CPACK_RPM_PACKAGE_VERSION). One may change the default value if the -# previous packaging was buggy and/or you want to put here a fancy Linux -# distro specific numbering. -# -# .. variable:: CPACK_RPM_PACKAGE_LICENSE -# -# The RPM package license policy. -# -# * Mandatory : YES -# * Default : "unknown" -# -# .. variable:: CPACK_RPM_PACKAGE_GROUP -# -# The RPM package group. -# -# * Mandatory : YES -# * Default : "unknown" -# -# .. variable:: CPACK_RPM_PACKAGE_VENDOR -# -# The RPM package vendor. -# -# * Mandatory : YES -# * Default : CPACK_PACKAGE_VENDOR if set or "unknown" -# -# .. variable:: CPACK_RPM_PACKAGE_URL -# -# The projects URL. -# -# * Mandatory : NO -# * Default : - -# -# .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION -# CPACK_RPM_<component>_PACKAGE_DESCRIPTION -# -# RPM package description. -# -# * Mandatory : YES -# * Default : CPACK_COMPONENT_<compName>_DESCRIPTION (component based installers -# only) if set, CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package -# description available" -# -# .. variable:: CPACK_RPM_COMPRESSION_TYPE -# -# RPM compression type. -# -# * Mandatory : NO -# * Default : - -# -# May be used to override RPM compression type to be used to build the -# RPM. For example some Linux distribution now default to lzma or xz -# compression whereas older cannot use such RPM. Using this one can enforce -# compression type to be used. Possible value are: lzma, xz, bzip2 and gzip. -# -# .. variable:: CPACK_RPM_PACKAGE_REQUIRES -# -# RPM spec requires field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM dependencies (requires). Note that you must enclose -# the complete requires string between quotes, for example:: -# -# set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") -# -# The required package list of an RPM file could be printed with:: -# -# rpm -qp --requires file.rpm -# -# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE -# -# RPM spec requires(pre) field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM preinstall dependencies (requires(pre)). Note that you must enclose -# the complete requires string between quotes, for example:: -# -# set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts") -# -# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST -# -# RPM spec requires(post) field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM postinstall dependencies (requires(post)). Note that you must enclose -# the complete requires string between quotes, for example:: -# -# set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts") -# -# -# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN -# -# RPM spec requires(postun) field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM postuninstall dependencies (requires(postun)). Note that you must enclose -# the complete requires string between quotes, for example:: -# -# set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts") -# -# -# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN -# -# RPM spec requires(preun) field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM preuninstall dependencies (requires(preun)). Note that you must enclose -# the complete requires string between quotes, for example:: -# -# set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts") -# -# .. variable:: CPACK_RPM_PACKAGE_SUGGESTS -# -# RPM spec suggest field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set weak RPM dependencies (suggests). Note that you must -# enclose the complete requires string between quotes. -# -# .. variable:: CPACK_RPM_PACKAGE_PROVIDES -# -# RPM spec provides field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM dependencies (provides). The provided package list -# of an RPM file could be printed with:: -# -# rpm -qp --provides file.rpm -# -# .. variable:: CPACK_RPM_PACKAGE_OBSOLETES -# -# RPM spec obsoletes field. -# -# * Mandatory : NO -# * Default : - -# -# May be used to set RPM packages that are obsoleted by this one. -# -# .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE -# -# build a relocatable RPM. -# -# * Mandatory : NO -# * Default : CPACK_PACKAGE_RELOCATABLE -# -# If this variable is set to TRUE or ON CPackRPM will try -# to build a relocatable RPM package. A relocatable RPM may -# be installed using:: -# -# rpm --prefix or --relocate -# -# in order to install it at an alternate place see rpm(8). Note that -# currently this may fail if CPACK_SET_DESTDIR is set to ON. If -# CPACK_SET_DESTDIR is set then you will get a warning message but if there -# is file installed with absolute path you'll get unexpected behavior. -# -# .. variable:: CPACK_RPM_SPEC_INSTALL_POST -# -# * Mandatory : NO -# * Default : - -# * Deprecated: YES -# -# This way of specifying post-install script is deprecated, use -# CPACK_RPM_POST_INSTALL_SCRIPT_FILE. -# May be used to set an RPM post-install command inside the spec file. -# For example setting it to "/bin/true" may be used to prevent -# rpmbuild to strip binaries. -# -# .. variable:: CPACK_RPM_SPEC_MORE_DEFINE -# -# RPM extended spec definitions lines. -# -# * Mandatory : NO -# * Default : - -# -# May be used to add any %define lines to the generated spec file. -# -# .. variable:: CPACK_RPM_PACKAGE_DEBUG -# -# Toggle CPackRPM debug output. -# -# * Mandatory : NO -# * Default : - -# -# May be set when invoking cpack in order to trace debug information -# during CPack RPM run. For example you may launch CPack like this:: -# -# cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM -# -# .. variable:: CPACK_RPM_USER_BINARY_SPECFILE -# -# A user provided spec file. -# -# * Mandatory : NO -# * Default : - -# -# May be set by the user in order to specify a USER binary spec file -# to be used by CPackRPM instead of generating the file. -# The specified file will be processed by configure_file( @ONLY). -# One can provide a component specific file by setting -# CPACK_RPM_<componentName>_USER_BINARY_SPECFILE. -# -# .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE -# -# Spec file template. -# -# * Mandatory : NO -# * Default : - -# -# If set CPack will generate a template for USER specified binary -# spec file and stop with an error. For example launch CPack like this:: -# -# cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM -# -# The user may then use this file in order to hand-craft is own -# binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE. -# -# .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE -# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE -# -# * Mandatory : NO -# * Default : - -# -# May be used to embed a pre (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %pre or %preun section -# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for -# each component can be overridden with -# CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and -# CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE. -# One may verify which scriptlet has been included with:: -# -# rpm -qp --scripts package.rpm -# -# .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE -# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE -# -# * Mandatory : NO -# * Default : - -# -# May be used to embed a post (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %post or %postun section. -# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for -# each component can be overridden with -# CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and -# CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE. -# One may verify which scriptlet has been included with:: -# -# rpm -qp --scripts package.rpm -# -# .. variable:: CPACK_RPM_USER_FILELIST -# CPACK_RPM_<COMPONENT>_USER_FILELIST -# -# * Mandatory : NO -# * Default : - -# -# May be used to explicitly specify %(<directive>) file line -# in the spec file. Like %config(noreplace) or any other directive -# that be found in the %files section. Since CPackRPM is generating -# the list of files (and directories) the user specified files of -# the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from -# the generated list. -# -# .. variable:: CPACK_RPM_CHANGELOG_FILE -# -# RPM changelog file. -# -# * Mandatory : NO -# * Default : - -# -# May be used to embed a changelog in the spec file. -# The refered file will be read and directly put after the %changelog -# section. -# -# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST -# -# list of path to be excluded. -# -# * Mandatory : NO -# * Default : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include -# -# May be used to exclude path (directories or files) from the auto-generated -# list of paths discovered by CPack RPM. The defaut value contains a -# reasonable set of values if the variable is not defined by the user. If the -# variable is defined by the user then CPackRPM will NOT any of the default -# path. If you want to add some path to the default list then you can use -# CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION variable. -# -# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION -# -# additional list of path to be excluded. -# -# * Mandatory : NO -# * Default : - -# -# May be used to add more exclude path (directories or files) from the initial -# default list of excluded paths. See CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST. -# -# .. variable:: CPACK_RPM_RELOCATION_PATHS -# -# * Mandatory : NO -# * Default : - -# -# May be used to specify more than one relocation path per relocatable RPM. -# Variable contains a list of relocation paths that if relative are prefixed -# by the value of CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX or by the value of -# CPACK_PACKAGING_INSTALL_PREFIX if the component version is not provided. -# Variable is not component based as its content can be used to set a different -# path prefix for e.g. binary dir and documentation dir at the same time. -# Only prefixes that are required by a certain component are added to that -# component - component must contain at least one file/directory/symbolic link -# with CPACK_RPM_RELOCATION_PATHS prefix for a certain relocation path -# to be added. Package will not contain any relocation paths if there are no -# files/directories/symbolic links on any of the provided prefix locations. -# Packages that either do not contain any relocation paths or contain -# files/directories/symbolic links that are outside relocation paths print -# out an AUTHOR_WARNING that RPM will be partially relocatable. -# -# .. variable:: CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX -# -# * Mandatory : NO -# * Default : CPACK_PACKAGING_INSTALL_PREFIX -# -# May be used to set per component CPACK_PACKAGING_INSTALL_PREFIX for -# relocatable RPM packages. - -#============================================================================= -# Copyright 2007-2009 Kitware, Inc. -# -# Distributed under the OSI-approved BSD License (the "License"); -# see accompanying file Copyright.txt for details. -# -# This software is distributed WITHOUT ANY WARRANTY; without even the -# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# See the License for more information. -#============================================================================= -# (To distribute this file outside of CMake, substitute the full -# License text for the above reference.) - -# Author: Eric Noulard with the help of Alexander Neundorf. - -function(cpack_rpm_prepare_relocation_paths) - # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX) - file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX) - else() - file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX) - endif() - - set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}") - list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS) - - # set base path prefix - if(EXISTS "${WDIR}/${PATH_PREFIX}") - set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PATH_PREFIX}\n") - list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}") - endif() - - # set other path prefixes - foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS}) - if(IS_ABSOLUTE "${RELOCATION_PATH}") - set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}") - else() - set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}") - endif() - - if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}") - set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PREPARED_RELOCATION_PATH}\n") - list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}") - endif() - endforeach() - - # warn about all the paths that are not relocatable - cmake_policy(PUSH) - # Tell file(GLOB_RECURSE) not to follow directory symlinks - # even if the project does not set this policy to NEW. - cmake_policy(SET CMP0009 NEW) - file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*") - cmake_policy(POP) - foreach(TMP_PATH ${FILE_PATHS_}) - string(LENGTH "${WDIR}" WDIR_LEN) - string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH) - unset(TMP_PATH_FOUND_) - - foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES}) - file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}") - string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_) - - if(NOT "${PREFIX_}" STREQUAL "..") - set(TPM_PATH_FOUND_ TRUE) - break() - endif() - endforeach() - - if(NOT TPM_PATH_FOUND_) - message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.") - endif() - endforeach() - - set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE) - set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE) -endfunction() - -if(CMAKE_BINARY_DIR) - message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.") -endif() - -if(NOT UNIX) - message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") -endif() - -# rpmbuild is the basic command for building RPM package -# it may be a simple (symbolic) link to rpm command. -find_program(RPMBUILD_EXECUTABLE rpmbuild) - -# Check version of the rpmbuild tool this would be easier to -# track bugs with users and CPackRPM debug mode. -# We may use RPM version in order to check for available version dependent features -if(RPMBUILD_EXECUTABLE) - execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version - OUTPUT_VARIABLE _TMP_VERSION - ERROR_QUIET - OUTPUT_STRIP_TRAILING_WHITESPACE) - string(REGEX REPLACE "^.* " "" - RPMBUILD_EXECUTABLE_VERSION - ${_TMP_VERSION}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") - endif() -endif() - -if(NOT RPMBUILD_EXECUTABLE) - message(FATAL_ERROR "RPM package requires rpmbuild executable") -endif() - -# Display lsb_release output if DEBUG mode enable -# This will help to diagnose problem with CPackRPM -# because we will know on which kind of Linux we are -if(CPACK_RPM_PACKAGE_DEBUG) - find_program(LSB_RELEASE_EXECUTABLE lsb_release) - if(LSB_RELEASE_EXECUTABLE) - execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a - OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT - ERROR_QUIET - OUTPUT_STRIP_TRAILING_WHITESPACE) - string(REGEX REPLACE "\n" ", " - LSB_RELEASE_OUTPUT - ${_TMP_LSB_RELEASE_OUTPUT}) - else () - set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") - endif() - message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") -endif() - -# We may use RPM version in the future in order -# to shut down warning about space in buildtree -# some recent RPM version should support space in different places. -# not checked [yet]. -if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") - message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") -endif() - -# If rpmbuild is found -# we try to discover alien since we may be on non RPM distro like Debian. -# In this case we may try to to use more advanced features -# like generating RPM directly from DEB using alien. -# FIXME feature not finished (yet) -find_program(ALIEN_EXECUTABLE alien) -if(ALIEN_EXECUTABLE) - message(STATUS "alien found, we may be on a Debian based distro.") -endif() - -# Are we packaging components ? -if(CPACK_RPM_PACKAGE_COMPONENT) - set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") - string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) -else() - set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") -endif() - -set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") - -# -# Use user-defined RPM specific variables value -# or generate reasonable default value from -# CPACK_xxx generic values. -# The variables comes from the needed (mandatory or not) -# values found in the RPM specification file aka ".spec" file. -# The variables which may/should be defined are: -# - -# CPACK_RPM_PACKAGE_SUMMARY (mandatory) - -# CPACK_RPM_PACKAGE_SUMMARY_ is used only locally so that it can be unset each time before use otherwise -# component packaging could leak variable content between components -unset(CPACK_RPM_PACKAGE_SUMMARY_) -if(CPACK_RPM_PACKAGE_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY_ ${CPACK_RPM_PACKAGE_SUMMARY}) - unset(CPACK_RPM_PACKAGE_SUMMARY) -endif() - -#Check for component summary first. -#If not set, it will use regular package summary logic. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) - endif() -endif() - -if(NOT CPACK_RPM_PACKAGE_SUMMARY) - if(CPACK_RPM_PACKAGE_SUMMARY_) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) - elseif(CPACK_PACKAGE_DESCRIPTION_SUMMARY) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) - else() - # if neither var is defined lets use the name as summary - string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) - endif() -endif() - -# CPACK_RPM_PACKAGE_NAME (mandatory) -if(NOT CPACK_RPM_PACKAGE_NAME) - string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) -endif() - -# CPACK_RPM_PACKAGE_VERSION (mandatory) -if(NOT CPACK_RPM_PACKAGE_VERSION) - if(NOT CPACK_PACKAGE_VERSION) - message(FATAL_ERROR "RPM package requires a package version") - endif() - set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) -endif() -# Replace '-' in version with '_' -# '-' character is an Illegal RPM version character -# it is illegal because it is used to separate -# RPM "Version" from RPM "Release" -string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) - -# CPACK_RPM_PACKAGE_ARCHITECTURE (optional) -if(CPACK_RPM_PACKAGE_ARCHITECTURE) - set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}") - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") - endif() -else() - set(TMP_RPM_BUILDARCH "") -endif() - -# CPACK_RPM_PACKAGE_RELEASE -# The RPM release is the numbering of the RPM package ITSELF -# this is the version of the PACKAGING and NOT the version -# of the CONTENT of the package. -# You may well need to generate a new RPM package release -# without changing the version of the packaged software. -# This is the case when the packaging is buggy (not) the software :=) -# If not set, 1 is a good candidate -if(NOT CPACK_RPM_PACKAGE_RELEASE) - set(CPACK_RPM_PACKAGE_RELEASE 1) -endif() - -# CPACK_RPM_PACKAGE_LICENSE -if(NOT CPACK_RPM_PACKAGE_LICENSE) - set(CPACK_RPM_PACKAGE_LICENSE "unknown") -endif() - -# CPACK_RPM_PACKAGE_GROUP -if(NOT CPACK_RPM_PACKAGE_GROUP) - set(CPACK_RPM_PACKAGE_GROUP "unknown") -endif() - -# CPACK_RPM_PACKAGE_VENDOR -if(NOT CPACK_RPM_PACKAGE_VENDOR) - if(CPACK_PACKAGE_VENDOR) - set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") - else() - set(CPACK_RPM_PACKAGE_VENDOR "unknown") - endif() -endif() - -# CPACK_RPM_PACKAGE_SOURCE -# The name of the source tarball in case we generate a source RPM - -# CPACK_RPM_PACKAGE_DESCRIPTION -# The variable content may be either -# - explicitly given by the user or -# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE -# if it is defined -# - set to a default value -# - -# CPACK_RPM_PACKAGE_DESCRIPTION_ is used only locally so that it can be unset each time before use otherwise -# component packaging could leak variable content between components -unset(CPACK_RPM_PACKAGE_DESCRIPTION_) -if(CPACK_RPM_PACKAGE_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION_ ${CPACK_RPM_PACKAGE_DESCRIPTION}) - unset(CPACK_RPM_PACKAGE_DESCRIPTION) -endif() - -#Check for a component description first. -#If not set, it will use regular package description logic. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) - elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) - endif() -endif() - -if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) - if(CPACK_RPM_PACKAGE_DESCRIPTION_) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) - elseif(CPACK_PACKAGE_DESCRIPTION_FILE) - file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) - else () - set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") - endif () -endif () - -# CPACK_RPM_COMPRESSION_TYPE -# -if (CPACK_RPM_COMPRESSION_TYPE) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") - endif() - if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") - set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") - endif() -else() - set(CPACK_RPM_COMPRESSION_TYPE_TMP "") -endif() - -if(CPACK_PACKAGE_RELOCATABLE) - set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) -endif() -if(CPACK_RPM_PACKAGE_RELOCATABLE) - unset(TMP_RPM_PREFIXES) - - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Trying to build a relocatable package") - endif() - if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) - message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") - else() - set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) - cpack_rpm_prepare_relocation_paths() - endif() -endif() - -# Check if additional fields for RPM spec header are given -# There may be some COMPONENT specific variables as well -# If component specific var is not provided we use the global one -# for each component -foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") - endif() - if(CPACK_RPM_PACKAGE_COMPONENT) - if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) - else() - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") - message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) - endif() - endif() - else() - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") - endif() - set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) - endif() - endif() - - # Do not forget to unset previously set header (from previous component) - unset(TMP_RPM_${_RPM_SPEC_HEADER}) - # Treat the RPM Spec keyword iff it has been properly defined - if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) - # Transform NAME --> Name e.g. PROVIDES --> Provides - # The Upper-case first letter and lowercase tail is the - # appropriate value required in the final RPM spec file. - string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) - string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) - string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) - set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") - # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. - set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) - list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) - if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) - string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") - set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") - endif() - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") - endif() - set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") - unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) - endif() -endforeach() - -# CPACK_RPM_SPEC_INSTALL_POST -# May be used to define a RPM post intallation script -# for example setting it to "/bin/true" may prevent -# rpmbuild from stripping binaries. -if(CPACK_RPM_SPEC_INSTALL_POST) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") - endif() - set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") -endif() - -# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE) -# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE) -# May be used to embed a post (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %post or %postun section -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) - set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) - else() - set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) - endif() - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) - set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) - else() - set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) - endif() -else() - set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) - set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) -endif() - -# Handle post-install file if it has been specified -if(CPACK_RPM_POST_INSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) - file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no post install file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_POSTINSTALL "") -endif() - -# Handle post-uninstall file if it has been specified -if(CPACK_RPM_POST_UNINSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) - file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no post uninstall file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_POSTUNINSTALL "") -endif() - -# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE) -# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE) -# May be used to embed a pre (un)installation script in the spec file. -# The refered script file(s) will be read and directly -# put after the %pre or %preun section -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) - set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) - else() - set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) - endif() - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) - set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) - else() - set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) - endif() -else() - set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) - set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) -endif() - -# Handle pre-install file if it has been specified -if(CPACK_RPM_PRE_INSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) - file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no pre-install file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_PREINSTALL "") -endif() - -# Handle pre-uninstall file if it has been specified -if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) - if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) - file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) - else() - message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") - endif() -else() - # reset SPEC var value if no pre-uninstall file has been specified - # (either globally or component-wise) - set(CPACK_RPM_SPEC_PREUNINSTALL "") -endif() - -# CPACK_RPM_CHANGELOG_FILE -# May be used to embed a changelog in the spec file. -# The refered file will be read and directly put after the %changelog section -if(CPACK_RPM_CHANGELOG_FILE) - if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) - file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) - else() - message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") - endif() -else() - set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard <eric.noulard@gmail.com> - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") -endif() - -# CPACK_RPM_SPEC_MORE_DEFINE -# This is a generated spec rpm file spaceholder -if(CPACK_RPM_SPEC_MORE_DEFINE) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") - endif() -endif() - -# Now we may create the RPM build tree structure -set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") -message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") -# Prepare RPM build tree -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) -file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) - -#set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") -set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") -# it seems rpmbuild can't handle spaces in the path -# neither escaping (as below) nor putting quotes around the path seem to help -#string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") -set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") - -# if we are creating a relocatable package, omit parent directories of -# CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" -# which is passed to the find command that generates the content-list -if(CPACK_RPM_PACKAGE_RELOCATABLE) - # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are - # destinct parent paths of other relocation paths and remove the - # final element (so the install-prefix dir itself is not omitted - # from the RPM's content-list) - list(SORT RPM_USED_PACKAGE_PREFIXES) - set(_DISTINCT_PATH "NOT_SET") - foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) - if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") - set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") - - string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}") - list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) - unset(_TMP_LIST) - # Now generate all of the parent dirs of the relocation path - foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) - list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") - string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") - list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND) - if(_DUPLICATE_FOUND EQUAL -1) - set(_OMIT_DIR "-o -path ${_OMIT_DIR}") - separate_arguments(_OMIT_DIR) - list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) - endif() - endforeach() - endif() - endforeach() -endif() - -if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") -endif() - -if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) - set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) - if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) - message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") - list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") - endif() -endif() - -if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) - if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") - endif() - foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) - list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}") - endforeach() -endif() -if (CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") -endif() - -# Use files tree to construct files command (spec file) -# We should not forget to include symlinks (thus -o -type l) -# We should include directory as well (thus -type d) -# but not the main local dir "." (thus -a -not -name ".") -# We must remove the './' due to the local search and escape the -# file name by enclosing it between double quotes (thus the sed) -# Then we must authorize any man pages extension (adding * at the end) -# because rpmbuild may automatically compress those files -execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) ) - COMMAND sed s:.*/man.*/.*:&*: - COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ - WORKING_DIRECTORY "${WDIR}" - OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) - -# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT> -# into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL -# otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES -# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_ABSOLUTE_DESTINATION_FILES) - set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") - set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") - message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") - endif() - endif() -else() - if(CPACK_ABSOLUTE_DESTINATION_FILES) - set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") - endif() -endif() - -# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST. -if(CPACK_RPM_PACKAGE_COMPONENT) - if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) - set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") - message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") - endif() - else() - set(CPACK_RPM_USER_FILELIST_INTERNAL "") - endif() -else() - if(CPACK_RPM_USER_FILELIST) - set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") - else() - set(CPACK_RPM_USER_FILELIST_INTERNAL "") - endif() -endif() - -# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL -# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL -# or CPACK_RPM_INSTALL_FILES, -# hence it must be done before these auto-generated lists are processed. -if(CPACK_RPM_USER_FILELIST_INTERNAL) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") - endif() - - # Create CMake list from CPACK_RPM_INSTALL_FILES - string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) - string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") - string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") - - set(CPACK_RPM_USER_INSTALL_FILES "") - foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) - string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F}) - string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F}) - - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") - endif() - if(F_PREFIX) - set(F_PREFIX "${F_PREFIX} ") - endif() - # Rebuild the user list file - set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") - - # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL - list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) - # ABSOLUTE destination files list may not exists at all - if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) - list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) - endif() - - endforeach() - - # Rebuild CPACK_RPM_INSTALL_FILES - set(CPACK_RPM_INSTALL_FILES "") - foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") - endforeach() -else() - set(CPACK_RPM_USER_INSTALL_FILES "") -endif() - -if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") - endif() - # Remove trailing space - string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) - # Transform endline separated - string into CMake List - string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") - # Remove unecessary quotes - string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") - # Remove ABSOLUTE install file from INSTALL FILE LIST - list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) - # Rebuild INSTALL_FILES - set(CPACK_RPM_INSTALL_FILES "") - foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") - endforeach() - # Build ABSOLUTE_INSTALL_FILES - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") - foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") - endforeach() - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") - message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") - endif() -else() - # reset vars in order to avoid leakage of value(s) from one component to another - set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") -endif() - -# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir -# This is necessary to avoid duplicate files since rpmbuild do -# recursion on its own when encountering a pathname which is a directory -# which is not flagged as %dir -string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) -string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") -string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST - "${CPACK_RPM_INSTALL_FILES_LIST}") -set(CPACK_RPM_INSTALL_FILES "") -foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) - if(IS_DIRECTORY "${WDIR}/${F}") - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") - else() - set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") - endif() -endforeach() -set(CPACK_RPM_INSTALL_FILES_LIST "") - -# The name of the final spec file to be used by rpmbuild -set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") - -# Print out some debug information if we were asked for that -if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") - message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") - message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") - message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") - message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") - message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") - message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") - message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") - message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") -endif() - -# protect @ in pathname in order to avoid their -# interpretation during the configure_file step -set(CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES}") -set(PROTECTED_AT "@") -string(REPLACE "@" "\@PROTECTED_AT\@" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES_LIST}") -set(CPACK_RPM_INSTALL_FILES_LIST "") - -# -# USER generated/provided spec file handling. -# - -# We can have a component specific spec file. -if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE) - set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE}) -endif() - -# We should generate a USER spec file template: -# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE -# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE -if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) - file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in - "# -*- rpm-spec -*- -BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ -Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ -Name: \@CPACK_RPM_PACKAGE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_NAME\@ -Version: \@CPACK_RPM_PACKAGE_VERSION\@ -Release: \@CPACK_RPM_PACKAGE_RELEASE\@ -License: \@CPACK_RPM_PACKAGE_LICENSE\@ -Group: \@CPACK_RPM_PACKAGE_GROUP\@ -Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ -\@TMP_RPM_URL\@ -\@TMP_RPM_REQUIRES\@ -\@TMP_RPM_REQUIRES_PRE\@ -\@TMP_RPM_REQUIRES_POST\@ -\@TMP_RPM_REQUIRES_PREUN\@ -\@TMP_RPM_REQUIRES_POSTUN\@ -\@TMP_RPM_PROVIDES\@ -\@TMP_RPM_OBSOLETES\@ -\@TMP_RPM_CONFLICTS\@ -\@TMP_RPM_AUTOPROV\@ -\@TMP_RPM_AUTOREQ\@ -\@TMP_RPM_AUTOREQPROV\@ -\@TMP_RPM_BUILDARCH\@ -\@TMP_RPM_PREFIXES\@ - -%define _rpmdir \@CPACK_RPM_DIRECTORY\@ -%define _rpmfilename \@CPACK_RPM_FILE_NAME\@ -%define _unpackaged_files_terminate_build 0 -%define _topdir \@CPACK_RPM_DIRECTORY\@ -\@TMP_RPM_SPEC_INSTALL_POST\@ -\@CPACK_RPM_SPEC_MORE_DEFINE\@ -\@CPACK_RPM_COMPRESSION_TYPE_TMP\@ - -%description -\@CPACK_RPM_PACKAGE_DESCRIPTION\@ - -# This is a shortcutted spec file generated by CMake RPM generator -# we skip _install step because CPack does that for us. -# We do only save CPack installed tree in _prepr -# and then restore it in build. -%prep -mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" - -#p build - -%install -if [ -e $RPM_BUILD_ROOT ]; -then - rm -rf $RPM_BUILD_ROOT -fi -mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT - -%clean - -%post -\@CPACK_RPM_SPEC_POSTINSTALL\@ - -%postun -\@CPACK_RPM_SPEC_POSTUNINSTALL\@ - -%pre -\@CPACK_RPM_SPEC_PREINSTALL\@ - -%preun -\@CPACK_RPM_SPEC_PREUNINSTALL\@ - -%files -%defattr(-,root,root,-) -\@CPACK_RPM_INSTALL_FILES\@ -\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@ -\@CPACK_RPM_USER_INSTALL_FILES\@ - -%changelog -\@CPACK_RPM_SPEC_CHANGELOG\@ -") - # Stop here if we were asked to only generate a template USER spec file - # The generated file may then be used as a template by user who wants - # to customize their own spec file. - if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) - message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") - endif() -endif() - -# After that we may either use a user provided spec file -# or generate one using appropriate variables value. -if(CPACK_RPM_USER_BINARY_SPECFILE) - # User may have specified SPECFILE just use it - message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") - # The user provided file is processed for @var replacement - configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) -else() - # No User specified spec file, will use the generated spec file - message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") - # Note the just created file is processed for @var replacement - configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) -endif() - -# remove AT protection -unset(PROTECTED_AT) - -if(RPMBUILD_EXECUTABLE) - # Now call rpmbuild using the SPECFILE - execute_process( - COMMAND "${RPMBUILD_EXECUTABLE}" -bb - --define "_topdir ${CPACK_RPM_DIRECTORY}" - --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" - "${CPACK_RPM_BINARY_SPECFILE}" - WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" - RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT - ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" - OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") - if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) - file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) - file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) - message("CPackRPM:Debug: You may consult rpmbuild logs in: ") - message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") - message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") - message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") - message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") - endif() -else() - if(ALIEN_EXECUTABLE) - message(FATAL_ERROR "RPM packaging through alien not done (yet)") - endif() -endif() - -# reset variables from temporary variables -if(CPACK_RPM_PACKAGE_SUMMARY_) - set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) -else() - unset(CPACK_RPM_PACKAGE_SUMMARY) -endif() -if(CPACK_RPM_PACKAGE_DESCRIPTION_) - set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) -else() - unset(CPACK_RPM_PACKAGE_DESCRIPTION) -endif() |