diff options
Diffstat (limited to 'sysroot/usr/include/linux/firewire-cdev.h')
| -rw-r--r-- | sysroot/usr/include/linux/firewire-cdev.h | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/sysroot/usr/include/linux/firewire-cdev.h b/sysroot/usr/include/linux/firewire-cdev.h new file mode 100644 index 0000000..0f0e271 --- /dev/null +++ b/sysroot/usr/include/linux/firewire-cdev.h @@ -0,0 +1,477 @@ +/* + * Char device interface. + * + * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _LINUX_FIREWIRE_CDEV_H +#define _LINUX_FIREWIRE_CDEV_H + +#include <linux/ioctl.h> +#include <linux/types.h> +#include <linux/firewire-constants.h> + +#define FW_CDEV_EVENT_BUS_RESET 0x00 +#define FW_CDEV_EVENT_RESPONSE 0x01 +#define FW_CDEV_EVENT_REQUEST 0x02 +#define FW_CDEV_EVENT_ISO_INTERRUPT 0x03 + +/** + * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types + * @closure: For arbitrary use by userspace + * @type: Discriminates the fw_cdev_event_ types + * + * This struct may be used to access generic members of all fw_cdev_event_ + * types regardless of the specific type. + * + * Data passed in the @closure field for a request will be returned in the + * corresponding event. It is big enough to hold a pointer on all platforms. + * The ioctl used to set @closure depends on the @type of event. + */ +struct fw_cdev_event_common { + __u64 closure; + __u32 type; +}; + +/** + * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET + * @node_id: New node ID of this node + * @local_node_id: Node ID of the local node, i.e. of the controller + * @bm_node_id: Node ID of the bus manager + * @irm_node_id: Node ID of the iso resource manager + * @root_node_id: Node ID of the root node + * @generation: New bus generation + * + * This event is sent when the bus the device belongs to goes through a bus + * reset. It provides information about the new bus configuration, such as + * new node ID for this device, new root ID, and others. + */ +struct fw_cdev_event_bus_reset { + __u64 closure; + __u32 type; + __u32 node_id; + __u32 local_node_id; + __u32 bm_node_id; + __u32 irm_node_id; + __u32 root_node_id; + __u32 generation; +}; + +/** + * struct fw_cdev_event_response - Sent when a response packet was received + * @closure: See &fw_cdev_event_common; + * set by %FW_CDEV_IOC_SEND_REQUEST ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE + * @rcode: Response code returned by the remote node + * @length: Data length, i.e. the response's payload size in bytes + * @data: Payload data, if any + * + * This event is sent when the stack receives a response to an outgoing request + * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses + * carrying data (read and lock responses) follows immediately and can be + * accessed through the @data field. + */ +struct fw_cdev_event_response { + __u64 closure; + __u32 type; + __u32 rcode; + __u32 length; + __u32 data[0]; +}; + +/** + * struct fw_cdev_event_request - Sent on incoming request to an address region + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST + * @tcode: Transaction code of the incoming request + * @offset: The offset into the 48-bit per-node address space + * @handle: Reference to the kernel-side pending request + * @length: Data length, i.e. the request's payload size in bytes + * @data: Incoming data, if any + * + * This event is sent when the stack receives an incoming request to an address + * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is + * guaranteed to be completely contained in the specified region. Userspace is + * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl, + * using the same @handle. + * + * The payload data for requests carrying data (write and lock requests) + * follows immediately and can be accessed through the @data field. + */ +struct fw_cdev_event_request { + __u64 closure; + __u32 type; + __u32 tcode; + __u64 offset; + __u32 handle; + __u32 length; + __u32 data[0]; +}; + +/** + * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed + * @closure: See &fw_cdev_event_common; + * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl + * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT + * @cycle: Cycle counter of the interrupt packet + * @header_length: Total length of following headers, in bytes + * @header: Stripped headers, if any + * + * This event is sent when the controller has completed an &fw_cdev_iso_packet + * with the %FW_CDEV_ISO_INTERRUPT bit set. In the receive case, the headers + * stripped of all packets up until and including the interrupt packet are + * returned in the @header field. + */ +struct fw_cdev_event_iso_interrupt { + __u64 closure; + __u32 type; + __u32 cycle; + __u32 header_length; + __u32 header[0]; +}; + +/** + * union fw_cdev_event - Convenience union of fw_cdev_event_ types + * @common: Valid for all types + * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET + * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE + * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST + * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT + * + * Convenience union for userspace use. Events could be read(2) into a char + * buffer and then cast to this union for further processing. + */ +union fw_cdev_event { + struct fw_cdev_event_common common; + struct fw_cdev_event_bus_reset bus_reset; + struct fw_cdev_event_response response; + struct fw_cdev_event_request request; + struct fw_cdev_event_iso_interrupt iso_interrupt; +}; + +#define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info) +#define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request) +#define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate) +#define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate) +#define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response) +#define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset) +#define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor) +#define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor) + +#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context) +#define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso) +#define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso) +#define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso) +#define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer) + +/* FW_CDEV_VERSION History + * + * 1 Feb 18, 2007: Initial version. + */ +#define FW_CDEV_VERSION 1 + +/** + * struct fw_cdev_get_info - General purpose information ioctl + * @version: The version field is just a running serial number. + * We never break backwards compatibility, but may add more + * structs and ioctls in later revisions. + * @rom_length: If @rom is non-zero, at most rom_length bytes of configuration + * ROM will be copied into that user space address. In either + * case, @rom_length is updated with the actual length of the + * configuration ROM. + * @rom: If non-zero, address of a buffer to be filled by a copy of the + * local node's configuration ROM + * @bus_reset: If non-zero, address of a buffer to be filled by a + * &struct fw_cdev_event_bus_reset with the current state + * of the bus. This does not cause a bus reset to happen. + * @bus_reset_closure: Value of &closure in this and subsequent bus reset events + * @card: The index of the card this device belongs to + */ +struct fw_cdev_get_info { + __u32 version; + __u32 rom_length; + __u64 rom; + __u64 bus_reset; + __u64 bus_reset_closure; + __u32 card; +}; + +/** + * struct fw_cdev_send_request - Send an asynchronous request packet + * @tcode: Transaction code of the request + * @length: Length of outgoing payload, in bytes + * @offset: 48-bit offset at destination node + * @closure: Passed back to userspace in the response event + * @data: Userspace pointer to payload + * @generation: The bus generation where packet is valid + * + * Send a request to the device. This ioctl implements all outgoing requests. + * Both quadlet and block request specify the payload as a pointer to the data + * in the @data field. Once the transaction completes, the kernel writes an + * &fw_cdev_event_request event back. The @closure field is passed back to + * user space in the response event. + */ +struct fw_cdev_send_request { + __u32 tcode; + __u32 length; + __u64 offset; + __u64 closure; + __u64 data; + __u32 generation; +}; + +/** + * struct fw_cdev_send_response - Send an asynchronous response packet + * @rcode: Response code as determined by the userspace handler + * @length: Length of outgoing payload, in bytes + * @data: Userspace pointer to payload + * @handle: The handle from the &fw_cdev_event_request + * + * Send a response to an incoming request. By setting up an address range using + * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An + * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must + * send a reply using this ioctl. The event has a handle to the kernel-side + * pending transaction, which should be used with this ioctl. + */ +struct fw_cdev_send_response { + __u32 rcode; + __u32 length; + __u64 data; + __u32 handle; +}; + +/** + * struct fw_cdev_allocate - Allocate a CSR address range + * @offset: Start offset of the address range + * @closure: To be passed back to userspace in request events + * @length: Length of the address range, in bytes + * @handle: Handle to the allocation, written by the kernel + * + * Allocate an address range in the 48-bit address space on the local node + * (the controller). This allows userspace to listen for requests with an + * offset within that address range. When the kernel receives a request + * within the range, an &fw_cdev_event_request event will be written back. + * The @closure field is passed back to userspace in the response event. + * The @handle field is an out parameter, returning a handle to the allocated + * range to be used for later deallocation of the range. + */ +struct fw_cdev_allocate { + __u64 offset; + __u64 closure; + __u32 length; + __u32 handle; +}; + +/** + * struct fw_cdev_deallocate - Free an address range allocation + * @handle: Handle to the address range, as returned by the kernel when the + * range was allocated + */ +struct fw_cdev_deallocate { + __u32 handle; +}; + +#define FW_CDEV_LONG_RESET 0 +#define FW_CDEV_SHORT_RESET 1 + +/** + * struct fw_cdev_initiate_bus_reset - Initiate a bus reset + * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET + * + * Initiate a bus reset for the bus this device is on. The bus reset can be + * either the original (long) bus reset or the arbitrated (short) bus reset + * introduced in 1394a-2000. + */ +struct fw_cdev_initiate_bus_reset { + __u32 type; /* FW_CDEV_SHORT_RESET or FW_CDEV_LONG_RESET */ +}; + +/** + * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM + * @immediate: If non-zero, immediate key to insert before pointer + * @key: Upper 8 bits of root directory pointer + * @data: Userspace pointer to contents of descriptor block + * @length: Length of descriptor block data, in bytes + * @handle: Handle to the descriptor, written by the kernel + * + * Add a descriptor block and optionally a preceding immediate key to the local + * node's configuration ROM. + * + * The @key field specifies the upper 8 bits of the descriptor root directory + * pointer and the @data and @length fields specify the contents. The @key + * should be of the form 0xXX000000. The offset part of the root directory entry + * will be filled in by the kernel. + * + * If not 0, the @immediate field specifies an immediate key which will be + * inserted before the root directory pointer. + * + * If successful, the kernel adds the descriptor and writes back a handle to the + * kernel-side object to be used for later removal of the descriptor block and + * immediate key. + */ +struct fw_cdev_add_descriptor { + __u32 immediate; + __u32 key; + __u64 data; + __u32 length; + __u32 handle; +}; + +/** + * struct fw_cdev_remove_descriptor - Remove contents from the configuration ROM + * @handle: Handle to the descriptor, as returned by the kernel when the + * descriptor was added + * + * Remove a descriptor block and accompanying immediate key from the local + * node's configuration ROM. + */ +struct fw_cdev_remove_descriptor { + __u32 handle; +}; + +#define FW_CDEV_ISO_CONTEXT_TRANSMIT 0 +#define FW_CDEV_ISO_CONTEXT_RECEIVE 1 + +/** + * struct fw_cdev_create_iso_context - Create a context for isochronous IO + * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE + * @header_size: Header size to strip for receive contexts + * @channel: Channel to bind to + * @speed: Speed to transmit at + * @closure: To be returned in &fw_cdev_event_iso_interrupt + * @handle: Handle to context, written back by kernel + * + * Prior to sending or receiving isochronous I/O, a context must be created. + * The context records information about the transmit or receive configuration + * and typically maps to an underlying hardware resource. A context is set up + * for either sending or receiving. It is bound to a specific isochronous + * channel. + * + * If a context was successfully created, the kernel writes back a handle to the + * context, which must be passed in for subsequent operations on that context. + */ +struct fw_cdev_create_iso_context { + __u32 type; + __u32 header_size; + __u32 channel; + __u32 speed; + __u64 closure; + __u32 handle; +}; + +#define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v) +#define FW_CDEV_ISO_INTERRUPT (1 << 16) +#define FW_CDEV_ISO_SKIP (1 << 17) +#define FW_CDEV_ISO_SYNC (1 << 17) +#define FW_CDEV_ISO_TAG(v) ((v) << 18) +#define FW_CDEV_ISO_SY(v) ((v) << 20) +#define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24) + +/** + * struct fw_cdev_iso_packet - Isochronous packet + * @control: Contains the header length (8 uppermost bits), the sy field + * (4 bits), the tag field (2 bits), a sync flag (1 bit), + * a skip flag (1 bit), an interrupt flag (1 bit), and the + * payload length (16 lowermost bits) + * @header: Header and payload + * + * &struct fw_cdev_iso_packet is used to describe isochronous packet queues. + * + * Use the FW_CDEV_ISO_ macros to fill in @control. The sy and tag fields are + * specified by IEEE 1394a and IEC 61883. + * + * FIXME - finish this documentation + */ +struct fw_cdev_iso_packet { + __u32 control; + __u32 header[0]; +}; + +/** + * struct fw_cdev_queue_iso - Queue isochronous packets for I/O + * @packets: Userspace pointer to packet data + * @data: Pointer into mmap()'ed payload buffer + * @size: Size of packet data in bytes + * @handle: Isochronous context handle + * + * Queue a number of isochronous packets for reception or transmission. + * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs, + * which describe how to transmit from or receive into a contiguous region + * of a mmap()'ed payload buffer. As part of the packet descriptors, + * a series of headers can be supplied, which will be prepended to the + * payload during DMA. + * + * The kernel may or may not queue all packets, but will write back updated + * values of the @packets, @data and @size fields, so the ioctl can be + * resubmitted easily. + */ +struct fw_cdev_queue_iso { + __u64 packets; + __u64 data; + __u32 size; + __u32 handle; +}; + +#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1 +#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2 +#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4 +#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8 +#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15 + +/** + * struct fw_cdev_start_iso - Start an isochronous transmission or reception + * @cycle: Cycle in which to start I/O. If @cycle is greater than or + * equal to 0, the I/O will start on that cycle. + * @sync: Determines the value to wait for for receive packets that have + * the %FW_CDEV_ISO_SYNC bit set + * @tags: Tag filter bit mask. Only valid for isochronous reception. + * Determines the tag values for which packets will be accepted. + * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags. + * @handle: Isochronous context handle within which to transmit or receive + */ +struct fw_cdev_start_iso { + __s32 cycle; + __u32 sync; + __u32 tags; + __u32 handle; +}; + +/** + * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception + * @handle: Handle of isochronous context to stop + */ +struct fw_cdev_stop_iso { + __u32 handle; +}; + +/** + * struct fw_cdev_get_cycle_timer - read cycle timer register + * @local_time: system time, in microseconds since the Epoch + * @cycle_timer: isochronous cycle timer, as per OHCI 1.1 clause 5.13 + * + * The %FW_CDEV_IOC_GET_CYCLE_TIMER ioctl reads the isochronous cycle timer + * and also the system clock. This allows to express the receive time of an + * isochronous packet as a system time with microsecond accuracy. + */ +struct fw_cdev_get_cycle_timer { + __u64 local_time; + __u32 cycle_timer; +}; + +#endif /* _LINUX_FIREWIRE_CDEV_H */ |