Import gdb 7.10 linux-x86_64 prebuilt.

Taken from aosp-master-ndk build 2274331.

Bug: http://b/21920612
Change-Id: I2129ab5b85c96273bdb97ee9ca82116bb4db87fa

1 files changed, 1342 insertions, 0 deletions

diff --git a/lib/python2.7/httplib.py b/lib/python2.7/httplib.py
new file mode 100644
index 0000000..5c919d2
--- /dev/null
+++ b/lib/python2.7/httplib.py
@@ -0,0 +1,1342 @@
+r"""HTTP/1.1 client library
+
+<intro stuff goes here>
+<other stuff, too>
+
+HTTPConnection goes through a number of "states", which define when a client
+may legally make another request or fetch the response for a particular
+request. This diagram details these state transitions:
+
+    (null)
+      |
+      | HTTPConnection()
+      v
+    Idle
+      |
+      | putrequest()
+      v
+    Request-started
+      |
+      | ( putheader() )*  endheaders()
+      v
+    Request-sent
+      |
+      | response = getresponse()
+      v
+    Unread-response   [Response-headers-read]
+      |\____________________
+      |                     |
+      | response.read()     | putrequest()
+      v                     v
+    Idle                  Req-started-unread-response
+                     ______/|
+                   /        |
+   response.read() |        | ( putheader() )*  endheaders()
+                   v        v
+       Request-started    Req-sent-unread-response
+                            |
+                            | response.read()
+                            v
+                          Request-sent
+
+This diagram presents the following rules:
+  -- a second request may not be started until {response-headers-read}
+  -- a response [object] cannot be retrieved until {request-sent}
+  -- there is no differentiation between an unread response body and a
+     partially read response body
+
+Note: this enforcement is applied by the HTTPConnection class. The
+      HTTPResponse class does not enforce this state machine, which
+      implies sophisticated clients may accelerate the request/response
+      pipeline. Caution should be taken, though: accelerating the states
+      beyond the above pattern may imply knowledge of the server's
+      connection-close behavior for certain requests. For example, it
+      is impossible to tell whether the server will close the connection
+      UNTIL the response headers have been read; this means that further
+      requests cannot be placed into the pipeline until it is known that
+      the server will NOT be closing the connection.
+
+Logical State                  __state            __response
+-------------                  -------            ----------
+Idle                           _CS_IDLE           None
+Request-started                _CS_REQ_STARTED    None
+Request-sent                   _CS_REQ_SENT       None
+Unread-response                _CS_IDLE           <response_class>
+Req-started-unread-response    _CS_REQ_STARTED    <response_class>
+Req-sent-unread-response       _CS_REQ_SENT       <response_class>
+"""
+
+from array import array
+import os
+import socket
+from sys import py3kwarning
+from urlparse import urlsplit
+import warnings
+with warnings.catch_warnings():
+    if py3kwarning:
+        warnings.filterwarnings("ignore", ".*mimetools has been removed",
+                                DeprecationWarning)
+    import mimetools
+
+try:
+    from cStringIO import StringIO
+except ImportError:
+    from StringIO import StringIO
+
+__all__ = ["HTTP", "HTTPResponse", "HTTPConnection",
+           "HTTPException", "NotConnected", "UnknownProtocol",
+           "UnknownTransferEncoding", "UnimplementedFileMode",
+           "IncompleteRead", "InvalidURL", "ImproperConnectionState",
+           "CannotSendRequest", "CannotSendHeader", "ResponseNotReady",
+           "BadStatusLine", "error", "responses"]
+
+HTTP_PORT = 80
+HTTPS_PORT = 443
+
+_UNKNOWN = 'UNKNOWN'
+
+# connection states
+_CS_IDLE = 'Idle'
+_CS_REQ_STARTED = 'Request-started'
+_CS_REQ_SENT = 'Request-sent'
+
+# status codes
+# informational
+CONTINUE = 100
+SWITCHING_PROTOCOLS = 101
+PROCESSING = 102
+
+# successful
+OK = 200
+CREATED = 201
+ACCEPTED = 202
+NON_AUTHORITATIVE_INFORMATION = 203
+NO_CONTENT = 204
+RESET_CONTENT = 205
+PARTIAL_CONTENT = 206
+MULTI_STATUS = 207
+IM_USED = 226
+
+# redirection
+MULTIPLE_CHOICES = 300
+MOVED_PERMANENTLY = 301
+FOUND = 302
+SEE_OTHER = 303
+NOT_MODIFIED = 304
+USE_PROXY = 305
+TEMPORARY_REDIRECT = 307
+
+# client error
+BAD_REQUEST = 400
+UNAUTHORIZED = 401
+PAYMENT_REQUIRED = 402
+FORBIDDEN = 403
+NOT_FOUND = 404
+METHOD_NOT_ALLOWED = 405
+NOT_ACCEPTABLE = 406
+PROXY_AUTHENTICATION_REQUIRED = 407
+REQUEST_TIMEOUT = 408
+CONFLICT = 409
+GONE = 410
+LENGTH_REQUIRED = 411
+PRECONDITION_FAILED = 412
+REQUEST_ENTITY_TOO_LARGE = 413
+REQUEST_URI_TOO_LONG = 414
+UNSUPPORTED_MEDIA_TYPE = 415
+REQUESTED_RANGE_NOT_SATISFIABLE = 416
+EXPECTATION_FAILED = 417
+UNPROCESSABLE_ENTITY = 422
+LOCKED = 423
+FAILED_DEPENDENCY = 424
+UPGRADE_REQUIRED = 426
+
+# server error
+INTERNAL_SERVER_ERROR = 500
+NOT_IMPLEMENTED = 501
+BAD_GATEWAY = 502
+SERVICE_UNAVAILABLE = 503
+GATEWAY_TIMEOUT = 504
+HTTP_VERSION_NOT_SUPPORTED = 505
+INSUFFICIENT_STORAGE = 507
+NOT_EXTENDED = 510
+
+# Mapping status codes to official W3C names
+responses = {
+    100: 'Continue',
+    101: 'Switching Protocols',
+
+    200: 'OK',
+    201: 'Created',
+    202: 'Accepted',
+    203: 'Non-Authoritative Information',
+    204: 'No Content',
+    205: 'Reset Content',
+    206: 'Partial Content',
+
+    300: 'Multiple Choices',
+    301: 'Moved Permanently',
+    302: 'Found',
+    303: 'See Other',
+    304: 'Not Modified',
+    305: 'Use Proxy',
+    306: '(Unused)',
+    307: 'Temporary Redirect',
+
+    400: 'Bad Request',
+    401: 'Unauthorized',
+    402: 'Payment Required',
+    403: 'Forbidden',
+    404: 'Not Found',
+    405: 'Method Not Allowed',
+    406: 'Not Acceptable',
+    407: 'Proxy Authentication Required',
+    408: 'Request Timeout',
+    409: 'Conflict',
+    410: 'Gone',
+    411: 'Length Required',
+    412: 'Precondition Failed',
+    413: 'Request Entity Too Large',
+    414: 'Request-URI Too Long',
+    415: 'Unsupported Media Type',
+    416: 'Requested Range Not Satisfiable',
+    417: 'Expectation Failed',
+
+    500: 'Internal Server Error',
+    501: 'Not Implemented',
+    502: 'Bad Gateway',
+    503: 'Service Unavailable',
+    504: 'Gateway Timeout',
+    505: 'HTTP Version Not Supported',
+}
+
+# maximal amount of data to read at one time in _safe_read
+MAXAMOUNT = 1048576
+
+# maximal line length when calling readline().
+_MAXLINE = 65536
+
+class HTTPMessage(mimetools.Message):
+
+    def addheader(self, key, value):
+        """Add header for field key handling repeats."""
+        prev = self.dict.get(key)
+        if prev is None:
+            self.dict[key] = value
+        else:
+            combined = ", ".join((prev, value))
+            self.dict[key] = combined
+
+    def addcontinue(self, key, more):
+        """Add more field data from a continuation line."""
+        prev = self.dict[key]
+        self.dict[key] = prev + "\n " + more
+
+    def readheaders(self):
+        """Read header lines.
+
+        Read header lines up to the entirely blank line that terminates them.
+        The (normally blank) line that ends the headers is skipped, but not
+        included in the returned list.  If a non-header line ends the headers,
+        (which is an error), an attempt is made to backspace over it; it is
+        never included in the returned list.
+
+        The variable self.status is set to the empty string if all went well,
+        otherwise it is an error message.  The variable self.headers is a
+        completely uninterpreted list of lines contained in the header (so
+        printing them will reproduce the header exactly as it appears in the
+        file).
+
+        If multiple header fields with the same name occur, they are combined
+        according to the rules in RFC 2616 sec 4.2:
+
+        Appending each subsequent field-value to the first, each separated
+        by a comma. The order in which header fields with the same field-name
+        are received is significant to the interpretation of the combined
+        field value.
+        """
+        # XXX The implementation overrides the readheaders() method of
+        # rfc822.Message.  The base class design isn't amenable to
+        # customized behavior here so the method here is a copy of the
+        # base class code with a few small changes.
+
+        self.dict = {}
+        self.unixfrom = ''
+        self.headers = hlist = []
+        self.status = ''
+        headerseen = ""
+        firstline = 1
+        startofline = unread = tell = None
+        if hasattr(self.fp, 'unread'):
+            unread = self.fp.unread
+        elif self.seekable:
+            tell = self.fp.tell
+        while True:
+            if tell:
+                try:
+                    startofline = tell()
+                except IOError:
+                    startofline = tell = None
+                    self.seekable = 0
+            line = self.fp.readline(_MAXLINE + 1)
+            if len(line) > _MAXLINE:
+                raise LineTooLong("header line")
+            if not line:
+                self.status = 'EOF in headers'
+                break
+            # Skip unix From name time lines
+            if firstline and line.startswith('From '):
+                self.unixfrom = self.unixfrom + line
+                continue
+            firstline = 0
+            if headerseen and line[0] in ' \t':
+                # XXX Not sure if continuation lines are handled properly
+                # for http and/or for repeating headers
+                # It's a continuation line.
+                hlist.append(line)
+                self.addcontinue(headerseen, line.strip())
+                continue
+            elif self.iscomment(line):
+                # It's a comment.  Ignore it.
+                continue
+            elif self.islast(line):
+                # Note! No pushback here!  The delimiter line gets eaten.
+                break
+            headerseen = self.isheader(line)
+            if headerseen:
+                # It's a legal header line, save it.
+                hlist.append(line)
+                self.addheader(headerseen, line[len(headerseen)+1:].strip())
+                continue
+            else:
+                # It's not a header line; throw it back and stop here.
+                if not self.dict:
+                    self.status = 'No headers'
+                else:
+                    self.status = 'Non-header line where header expected'
+                # Try to undo the read.
+                if unread:
+                    unread(line)
+                elif tell:
+                    self.fp.seek(startofline)
+                else:
+                    self.status = self.status + '; bad seek'
+                break
+
+class HTTPResponse:
+
+    # strict: If true, raise BadStatusLine if the status line can't be
+    # parsed as a valid HTTP/1.0 or 1.1 status line.  By default it is
+    # false because it prevents clients from talking to HTTP/0.9
+    # servers.  Note that a response with a sufficiently corrupted
+    # status line will look like an HTTP/0.9 response.
+
+    # See RFC 2616 sec 19.6 and RFC 1945 sec 6 for details.
+
+    def __init__(self, sock, debuglevel=0, strict=0, method=None, buffering=False):
+        if buffering:
+            # The caller won't be using any sock.recv() calls, so buffering
+            # is fine and recommended for performance.
+            self.fp = sock.makefile('rb')
+        else:
+            # The buffer size is specified as zero, because the headers of
+            # the response are read with readline().  If the reads were
+            # buffered the readline() calls could consume some of the
+            # response, which make be read via a recv() on the underlying
+            # socket.
+            self.fp = sock.makefile('rb', 0)
+        self.debuglevel = debuglevel
+        self.strict = strict
+        self._method = method
+
+        self.msg = None
+
+        # from the Status-Line of the response
+        self.version = _UNKNOWN # HTTP-Version
+        self.status = _UNKNOWN  # Status-Code
+        self.reason = _UNKNOWN  # Reason-Phrase
+
+        self.chunked = _UNKNOWN         # is "chunked" being used?
+        self.chunk_left = _UNKNOWN      # bytes left to read in current chunk
+        self.length = _UNKNOWN          # number of bytes left in response
+        self.will_close = _UNKNOWN      # conn will close at end of response
+
+    def _read_status(self):
+        # Initialize with Simple-Response defaults
+        line = self.fp.readline(_MAXLINE + 1)
+        if len(line) > _MAXLINE:
+            raise LineTooLong("header line")
+        if self.debuglevel > 0:
+            print "reply:", repr(line)
+        if not line:
+            # Presumably, the server closed the connection before
+            # sending a valid response.
+            raise BadStatusLine(line)
+        try:
+            [version, status, reason] = line.split(None, 2)
+        except ValueError:
+            try:
+                [version, status] = line.split(None, 1)
+                reason = ""
+            except ValueError:
+                # empty version will cause next test to fail and status
+                # will be treated as 0.9 response.
+                version = ""
+        if not version.startswith('HTTP/'):
+            if self.strict:
+                self.close()
+                raise BadStatusLine(line)
+            else:
+                # assume it's a Simple-Response from an 0.9 server
+                self.fp = LineAndFileWrapper(line, self.fp)
+                return "HTTP/0.9", 200, ""
+
+        # The status code is a three-digit number
+        try:
+            status = int(status)
+            if status < 100 or status > 999:
+                raise BadStatusLine(line)
+        except ValueError:
+            raise BadStatusLine(line)
+        return version, status, reason
+
+    def begin(self):
+        if self.msg is not None:
+            # we've already started reading the response
+            return
+
+        # read until we get a non-100 response
+        while True:
+            version, status, reason = self._read_status()
+            if status != CONTINUE:
+                break
+            # skip the header from the 100 response
+            while True:
+                skip = self.fp.readline(_MAXLINE + 1)
+                if len(skip) > _MAXLINE:
+                    raise LineTooLong("header line")
+                skip = skip.strip()
+                if not skip:
+                    break
+                if self.debuglevel > 0:
+                    print "header:", skip
+
+        self.status = status
+        self.reason = reason.strip()
+        if version == 'HTTP/1.0':
+            self.version = 10
+        elif version.startswith('HTTP/1.'):
+            self.version = 11   # use HTTP/1.1 code for HTTP/1.x where x>=1
+        elif version == 'HTTP/0.9':
+            self.version = 9
+        else:
+            raise UnknownProtocol(version)
+
+        if self.version == 9:
+            self.length = None
+            self.chunked = 0
+            self.will_close = 1
+            self.msg = HTTPMessage(StringIO())
+            return
+
+        self.msg = HTTPMessage(self.fp, 0)
+        if self.debuglevel > 0:
+            for hdr in self.msg.headers:
+                print "header:", hdr,
+
+        # don't let the msg keep an fp
+        self.msg.fp = None
+
+        # are we using the chunked-style of transfer encoding?
+        tr_enc = self.msg.getheader('transfer-encoding')
+        if tr_enc and tr_enc.lower() == "chunked":
+            self.chunked = 1
+            self.chunk_left = None
+        else:
+            self.chunked = 0
+
+        # will the connection close at the end of the response?
+        self.will_close = self._check_close()
+
+        # do we have a Content-Length?
+        # NOTE: RFC 2616, S4.4, #3 says we ignore this if tr_enc is "chunked"
+        length = self.msg.getheader('content-length')
+        if length and not self.chunked:
+            try:
+                self.length = int(length)
+            except ValueError:
+                self.length = None
+            else:
+                if self.length < 0:  # ignore nonsensical negative lengths
+                    self.length = None
+        else:
+            self.length = None
+
+        # does the body have a fixed length? (of zero)
+        if (status == NO_CONTENT or status == NOT_MODIFIED or
+            100 <= status < 200 or      # 1xx codes
+            self._method == 'HEAD'):
+            self.length = 0
+
+        # if the connection remains open, and we aren't using chunked, and
+        # a content-length was not provided, then assume that the connection
+        # WILL close.
+        if not self.will_close and \
+           not self.chunked and \
+           self.length is None:
+            self.will_close = 1
+
+    def _check_close(self):
+        conn = self.msg.getheader('connection')
+        if self.version == 11:
+            # An HTTP/1.1 proxy is assumed to stay open unless
+            # explicitly closed.
+            conn = self.msg.getheader('connection')
+            if conn and "close" in conn.lower():
+                return True
+            return False
+
+        # Some HTTP/1.0 implementations have support for persistent
+        # connections, using rules different than HTTP/1.1.
+
+        # For older HTTP, Keep-Alive indicates persistent connection.
+        if self.msg.getheader('keep-alive'):
+            return False
+
+        # At least Akamai returns a "Connection: Keep-Alive" header,
+        # which was supposed to be sent by the client.
+        if conn and "keep-alive" in conn.lower():
+            return False
+
+        # Proxy-Connection is a netscape hack.
+        pconn = self.msg.getheader('proxy-connection')
+        if pconn and "keep-alive" in pconn.lower():
+            return False
+
+        # otherwise, assume it will close
+        return True
+
+    def close(self):
+        if self.fp:
+            self.fp.close()
+            self.fp = None
+
+    def isclosed(self):
+        # NOTE: it is possible that we will not ever call self.close(). This
+        #       case occurs when will_close is TRUE, length is None, and we
+        #       read up to the last byte, but NOT past it.
+        #
+        # IMPLIES: if will_close is FALSE, then self.close() will ALWAYS be
+        #          called, meaning self.isclosed() is meaningful.
+        return self.fp is None
+
+    # XXX It would be nice to have readline and __iter__ for this, too.
+
+    def read(self, amt=None):
+        if self.fp is None:
+            return ''
+
+        if self._method == 'HEAD':
+            self.close()
+            return ''
+
+        if self.chunked:
+            return self._read_chunked(amt)
+
+        if amt is None:
+            # unbounded read
+            if self.length is None:
+                s = self.fp.read()
+            else:
+                try:
+                    s = self._safe_read(self.length)
+                except IncompleteRead:
+                    self.close()
+                    raise
+                self.length = 0
+            self.close()        # we read everything
+            return s
+
+        if self.length is not None:
+            if amt > self.length:
+                # clip the read to the "end of response"
+                amt = self.length
+
+        # we do not use _safe_read() here because this may be a .will_close
+        # connection, and the user is reading more bytes than will be provided
+        # (for example, reading in 1k chunks)
+        s = self.fp.read(amt)
+        if not s:
+            # Ideally, we would raise IncompleteRead if the content-length
+            # wasn't satisfied, but it might break compatibility.
+            self.close()
+        if self.length is not None:
+            self.length -= len(s)
+            if not self.length:
+                self.close()
+
+        return s
+
+    def _read_chunked(self, amt):
+        assert self.chunked != _UNKNOWN
+        chunk_left = self.chunk_left
+        value = []
+        while True:
+            if chunk_left is None:
+                line = self.fp.readline(_MAXLINE + 1)
+                if len(line) > _MAXLINE:
+                    raise LineTooLong("chunk size")
+                i = line.find(';')
+                if i >= 0:
+                    line = line[:i] # strip chunk-extensions
+                try:
+                    chunk_left = int(line, 16)
+                except ValueError:
+                    # close the connection as protocol synchronisation is
+                    # probably lost
+                    self.close()
+                    raise IncompleteRead(''.join(value))
+                if chunk_left == 0:
+                    break
+            if amt is None:
+                value.append(self._safe_read(chunk_left))
+            elif amt < chunk_left:
+                value.append(self._safe_read(amt))
+                self.chunk_left = chunk_left - amt
+                return ''.join(value)
+            elif amt == chunk_left:
+                value.append(self._safe_read(amt))
+                self._safe_read(2)  # toss the CRLF at the end of the chunk
+                self.chunk_left = None
+                return ''.join(value)
+            else:
+                value.append(self._safe_read(chunk_left))
+                amt -= chunk_left
+
+            # we read the whole chunk, get another
+            self._safe_read(2)      # toss the CRLF at the end of the chunk
+            chunk_left = None
+
+        # read and discard trailer up to the CRLF terminator
+        ### note: we shouldn't have any trailers!
+        while True:
+            line = self.fp.readline(_MAXLINE + 1)
+            if len(line) > _MAXLINE:
+                raise LineTooLong("trailer line")
+            if not line:
+                # a vanishingly small number of sites EOF without
+                # sending the trailer
+                break
+            if line == '\r\n':
+                break
+
+        # we read everything; close the "file"
+        self.close()
+
+        return ''.join(value)
+
+    def _safe_read(self, amt):
+        """Read the number of bytes requested, compensating for partial reads.
+
+        Normally, we have a blocking socket, but a read() can be interrupted
+        by a signal (resulting in a partial read).
+
+        Note that we cannot distinguish between EOF and an interrupt when zero
+        bytes have been read. IncompleteRead() will be raised in this
+        situation.
+
+        This function should be used when <amt> bytes "should" be present for
+        reading. If the bytes are truly not available (due to EOF), then the
+        IncompleteRead exception can be used to detect the problem.
+        """
+        # NOTE(gps): As of svn r74426 socket._fileobject.read(x) will never
+        # return less than x bytes unless EOF is encountered.  It now handles
+        # signal interruptions (socket.error EINTR) internally.  This code
+        # never caught that exception anyways.  It seems largely pointless.
+        # self.fp.read(amt) will work fine.
+        s = []
+        while amt > 0:
+            chunk = self.fp.read(min(amt, MAXAMOUNT))
+            if not chunk:
+                raise IncompleteRead(''.join(s), amt)
+            s.append(chunk)
+            amt -= len(chunk)
+        return ''.join(s)
+
+    def fileno(self):
+        return self.fp.fileno()
+
+    def getheader(self, name, default=None):
+        if self.msg is None:
+            raise ResponseNotReady()
+        return self.msg.getheader(name, default)
+
+    def getheaders(self):
+        """Return list of (header, value) tuples."""
+        if self.msg is None:
+            raise ResponseNotReady()
+        return self.msg.items()
+
+
+class HTTPConnection:
+
+    _http_vsn = 11
+    _http_vsn_str = 'HTTP/1.1'
+
+    response_class = HTTPResponse
+    default_port = HTTP_PORT
+    auto_open = 1
+    debuglevel = 0
+    strict = 0
+
+    def __init__(self, host, port=None, strict=None,
+                 timeout=socket._GLOBAL_DEFAULT_TIMEOUT, source_address=None):
+        self.timeout = timeout
+        self.source_address = source_address
+        self.sock = None
+        self._buffer = []
+        self.__response = None
+        self.__state = _CS_IDLE
+        self._method = None
+        self._tunnel_host = None
+        self._tunnel_port = None
+        self._tunnel_headers = {}
+
+        self._set_hostport(host, port)
+        if strict is not None:
+            self.strict = strict
+
+    def set_tunnel(self, host, port=None, headers=None):
+        """ Sets up the host and the port for the HTTP CONNECT Tunnelling.
+
+        The headers argument should be a mapping of extra HTTP headers
+        to send with the CONNECT request.
+        """
+        self._tunnel_host = host
+        self._tunnel_port = port
+        if headers:
+            self._tunnel_headers = headers
+        else:
+            self._tunnel_headers.clear()
+
+    def _set_hostport(self, host, port):
+        if port is None:
+            i = host.rfind(':')
+            j = host.rfind(']')         # ipv6 addresses have [...]
+            if i > j:
+                try:
+                    port = int(host[i+1:])
+                except ValueError:
+                    if host[i+1:] == "":  # http://foo.com:/ == http://foo.com/
+                        port = self.default_port
+                    else:
+                        raise InvalidURL("nonnumeric port: '%s'" % host[i+1:])
+                host = host[:i]
+            else:
+                port = self.default_port
+            if host and host[0] == '[' and host[-1] == ']':
+                host = host[1:-1]
+        self.host = host
+        self.port = port
+
+    def set_debuglevel(self, level):
+        self.debuglevel = level
+
+    def _tunnel(self):
+        self._set_hostport(self._tunnel_host, self._tunnel_port)
+        self.send("CONNECT %s:%d HTTP/1.0\r\n" % (self.host, self.port))
+        for header, value in self._tunnel_headers.iteritems():
+            self.send("%s: %s\r\n" % (header, value))
+        self.send("\r\n")
+        response = self.response_class(self.sock, strict = self.strict,
+                                       method = self._method)
+        (version, code, message) = response._read_status()
+
+        if code != 200:
+            self.close()
+            raise socket.error("Tunnel connection failed: %d %s" % (code,
+                                                                    message.strip()))
+        while True:
+            line = response.fp.readline(_MAXLINE + 1)
+            if len(line) > _MAXLINE:
+                raise LineTooLong("header line")
+            if not line:
+                # for sites which EOF without sending trailer
+                break
+            if line == '\r\n':
+                break
+
+
+    def connect(self):
+        """Connect to the host and port specified in __init__."""
+        self.sock = socket.create_connection((self.host,self.port),
+                                             self.timeout, self.source_address)
+
+        if self._tunnel_host:
+            self._tunnel()
+
+    def close(self):
+        """Close the connection to the HTTP server."""
+        if self.sock:
+            self.sock.close()   # close it manually... there may be other refs
+            self.sock = None
+        if self.__response:
+            self.__response.close()
+            self.__response = None
+        self.__state = _CS_IDLE
+
+    def send(self, data):
+        """Send `data' to the server."""
+        if self.sock is None:
+            if self.auto_open:
+                self.connect()
+            else:
+                raise NotConnected()
+
+        if self.debuglevel > 0:
+            print "send:", repr(data)
+        blocksize = 8192
+        if hasattr(data,'read') and not isinstance(data, array):
+            if self.debuglevel > 0: print "sendIng a read()able"
+            datablock = data.read(blocksize)
+            while datablock:
+                self.sock.sendall(datablock)
+                datablock = data.read(blocksize)
+        else:
+            self.sock.sendall(data)
+
+    def _output(self, s):
+        """Add a line of output to the current request buffer.
+
+        Assumes that the line does *not* end with \\r\\n.
+        """
+        self._buffer.append(s)
+
+    def _send_output(self, message_body=None):
+        """Send the currently buffered request and clear the buffer.
+
+        Appends an extra \\r\\n to the buffer.
+        A message_body may be specified, to be appended to the request.
+        """
+        self._buffer.extend(("", ""))
+        msg = "\r\n".join(self._buffer)
+        del self._buffer[:]
+        # If msg and message_body are sent in a single send() call,
+        # it will avoid performance problems caused by the interaction
+        # between delayed ack and the Nagle algorithm.
+        if isinstance(message_body, str):
+            msg += message_body
+            message_body = None
+        self.send(msg)
+        if message_body is not None:
+            #message_body was not a string (i.e. it is a file) and
+            #we must run the risk of Nagle
+            self.send(message_body)
+
+    def putrequest(self, method, url, skip_host=0, skip_accept_encoding=0):
+        """Send a request to the server.
+
+        `method' specifies an HTTP request method, e.g. 'GET'.
+        `url' specifies the object being requested, e.g. '/index.html'.
+        `skip_host' if True does not add automatically a 'Host:' header
+        `skip_accept_encoding' if True does not add automatically an
+           'Accept-Encoding:' header
+        """
+
+        # if a prior response has been completed, then forget about it.
+        if self.__response and self.__response.isclosed():
+            self.__response = None
+
+
+        # in certain cases, we cannot issue another request on this connection.
+        # this occurs when:
+        #   1) we are in the process of sending a request.   (_CS_REQ_STARTED)
+        #   2) a response to a previous request has signalled that it is going
+        #      to close the connection upon completion.
+        #   3) the headers for the previous response have not been read, thus
+        #      we cannot determine whether point (2) is true.   (_CS_REQ_SENT)
+        #
+        # if there is no prior response, then we can request at will.
+        #
+        # if point (2) is true, then we will have passed the socket to the
+        # response (effectively meaning, "there is no prior response"), and
+        # will open a new one when a new request is made.
+        #
+        # Note: if a prior response exists, then we *can* start a new request.
+        #       We are not allowed to begin fetching the response to this new
+        #       request, however, until that prior response is complete.
+        #
+        if self.__state == _CS_IDLE:
+            self.__state = _CS_REQ_STARTED
+        else:
+            raise CannotSendRequest()
+
+        # Save the method we use, we need it later in the response phase
+        self._method = method
+        if not url:
+            url = '/'
+        hdr = '%s %s %s' % (method, url, self._http_vsn_str)
+
+        self._output(hdr)
+
+        if self._http_vsn == 11:
+            # Issue some standard headers for better HTTP/1.1 compliance
+
+            if not skip_host:
+                # this header is issued *only* for HTTP/1.1
+                # connections. more specifically, this means it is
+                # only issued when the client uses the new
+                # HTTPConnection() class. backwards-compat clients
+                # will be using HTTP/1.0 and those clients may be
+                # issuing this header themselves. we should NOT issue
+                # it twice; some web servers (such as Apache) barf
+                # when they see two Host: headers
+
+                # If we need a non-standard port,include it in the
+                # header.  If the request is going through a proxy,
+                # but the host of the actual URL, not the host of the
+                # proxy.
+
+                netloc = ''
+                if url.startswith('http'):
+                    nil, netloc, nil, nil, nil = urlsplit(url)
+
+                if netloc:
+                    try:
+                        netloc_enc = netloc.encode("ascii")
+                    except UnicodeEncodeError:
+                        netloc_enc = netloc.encode("idna")
+                    self.putheader('Host', netloc_enc)
+                else:
+                    try:
+                        host_enc = self.host.encode("ascii")
+                    except UnicodeEncodeError:
+                        host_enc = self.host.encode("idna")
+                    # Wrap the IPv6 Host Header with [] (RFC 2732)
+                    if host_enc.find(':') >= 0:
+                        host_enc = "[" + host_enc + "]"
+                    if self.port == self.default_port:
+                        self.putheader('Host', host_enc)
+                    else:
+                        self.putheader('Host', "%s:%s" % (host_enc, self.port))
+
+            # note: we are assuming that clients will not attempt to set these
+            #       headers since *this* library must deal with the
+            #       consequences. this also means that when the supporting
+            #       libraries are updated to recognize other forms, then this
+            #       code should be changed (removed or updated).
+
+            # we only want a Content-Encoding of "identity" since we don't
+            # support encodings such as x-gzip or x-deflate.
+            if not skip_accept_encoding:
+                self.putheader('Accept-Encoding', 'identity')
+
+            # we can accept "chunked" Transfer-Encodings, but no others
+            # NOTE: no TE header implies *only* "chunked"
+            #self.putheader('TE', 'chunked')
+
+            # if TE is supplied in the header, then it must appear in a
+            # Connection header.
+            #self.putheader('Connection', 'TE')
+
+        else:
+            # For HTTP/1.0, the server will assume "not chunked"
+            pass
+
+    def putheader(self, header, *values):
+        """Send a request header line to the server.
+
+        For example: h.putheader('Accept', 'text/html')
+        """
+        if self.__state != _CS_REQ_STARTED:
+            raise CannotSendHeader()
+
+        hdr = '%s: %s' % (header, '\r\n\t'.join([str(v) for v in values]))
+        self._output(hdr)
+
+    def endheaders(self, message_body=None):
+        """Indicate that the last header line has been sent to the server.
+
+        This method sends the request to the server.  The optional
+        message_body argument can be used to pass a message body
+        associated with the request.  The message body will be sent in
+        the same packet as the message headers if it is string, otherwise it is
+        sent as a separate packet.
+        """
+        if self.__state == _CS_REQ_STARTED:
+            self.__state = _CS_REQ_SENT
+        else:
+            raise CannotSendHeader()
+        self._send_output(message_body)
+
+    def request(self, method, url, body=None, headers={}):
+        """Send a complete request to the server."""
+        self._send_request(method, url, body, headers)
+
+    def _set_content_length(self, body):
+        # Set the content-length based on the body.
+        thelen = None
+        try:
+            thelen = str(len(body))
+        except TypeError, te:
+            # If this is a file-like object, try to
+            # fstat its file descriptor
+            try:
+                thelen = str(os.fstat(body.fileno()).st_size)
+            except (AttributeError, OSError):
+                # Don't send a length if this failed
+                if self.debuglevel > 0: print "Cannot stat!!"
+
+        if thelen is not None:
+            self.putheader('Content-Length', thelen)
+
+    def _send_request(self, method, url, body, headers):
+        # Honor explicitly requested Host: and Accept-Encoding: headers.
+        header_names = dict.fromkeys([k.lower() for k in headers])
+        skips = {}
+        if 'host' in header_names:
+            skips['skip_host'] = 1
+        if 'accept-encoding' in header_names:
+            skips['skip_accept_encoding'] = 1
+
+        self.putrequest(method, url, **skips)
+
+        if body is not None and 'content-length' not in header_names:
+            self._set_content_length(body)
+        for hdr, value in headers.iteritems():
+            self.putheader(hdr, value)
+        self.endheaders(body)
+
+    def getresponse(self, buffering=False):
+        "Get the response from the server."
+
+        # if a prior response has been completed, then forget about it.
+        if self.__response and self.__response.isclosed():
+            self.__response = None
+
+        #
+        # if a prior response exists, then it must be completed (otherwise, we
+        # cannot read this response's header to determine the connection-close
+        # behavior)
+        #
+        # note: if a prior response existed, but was connection-close, then the
+        # socket and response were made independent of this HTTPConnection
+        # object since a new request requires that we open a whole new
+        # connection
+        #
+        # this means the prior response had one of two states:
+        #   1) will_close: this connection was reset and the prior socket and
+        #                  response operate independently
+        #   2) persistent: the response was retained and we await its
+        #                  isclosed() status to become true.
+        #
+        if self.__state != _CS_REQ_SENT or self.__response:
+            raise ResponseNotReady()
+
+        args = (self.sock,)
+        kwds = {"strict":self.strict, "method":self._method}
+        if self.debuglevel > 0:
+            args += (self.debuglevel,)
+        if buffering:
+            #only add this keyword if non-default, for compatibility with
+            #other response_classes.
+            kwds["buffering"] = True;
+        response = self.response_class(*args, **kwds)
+
+        response.begin()
+        assert response.will_close != _UNKNOWN
+        self.__state = _CS_IDLE
+
+        if response.will_close:
+            # this effectively passes the connection to the response
+            self.close()
+        else:
+            # remember this, so we can tell when it is complete
+            self.__response = response
+
+        return response
+
+
+class HTTP:
+    "Compatibility class with httplib.py from 1.5."
+
+    _http_vsn = 10
+    _http_vsn_str = 'HTTP/1.0'
+
+    debuglevel = 0
+
+    _connection_class = HTTPConnection
+
+    def __init__(self, host='', port=None, strict=None):
+        "Provide a default host, since the superclass requires one."
+
+        # some joker passed 0 explicitly, meaning default port
+        if port == 0:
+            port = None
+
+        # Note that we may pass an empty string as the host; this will raise
+        # an error when we attempt to connect. Presumably, the client code
+        # will call connect before then, with a proper host.
+        self._setup(self._connection_class(host, port, strict))
+
+    def _setup(self, conn):
+        self._conn = conn
+
+        # set up delegation to flesh out interface
+        self.send = conn.send
+        self.putrequest = conn.putrequest
+        self.putheader = conn.putheader
+        self.endheaders = conn.endheaders
+        self.set_debuglevel = conn.set_debuglevel
+
+        conn._http_vsn = self._http_vsn
+        conn._http_vsn_str = self._http_vsn_str
+
+        self.file = None
+
+    def connect(self, host=None, port=None):
+        "Accept arguments to set the host/port, since the superclass doesn't."
+
+        if host is not None:
+            self._conn._set_hostport(host, port)
+        self._conn.connect()
+
+    def getfile(self):
+        "Provide a getfile, since the superclass' does not use this concept."
+        return self.file
+
+    def getreply(self, buffering=False):
+        """Compat definition since superclass does not define it.
+
+        Returns a tuple consisting of:
+        - server status code (e.g. '200' if all goes well)
+        - server "reason" corresponding to status code
+        - any RFC822 headers in the response from the server
+        """
+        try:
+            if not buffering:
+                response = self._conn.getresponse()
+            else:
+                #only add this keyword if non-default for compatibility
+                #with other connection classes
+                response = self._conn.getresponse(buffering)
+        except BadStatusLine, e:
+            ### hmm. if getresponse() ever closes the socket on a bad request,
+            ### then we are going to have problems with self.sock
+
+            ### should we keep this behavior? do people use it?
+            # keep the socket open (as a file), and return it
+            self.file = self._conn.sock.makefile('rb', 0)
+
+            # close our socket -- we want to restart after any protocol error
+            self.close()
+
+            self.headers = None
+            return -1, e.line, None
+
+        self.headers = response.msg
+        self.file = response.fp
+        return response.status, response.reason, response.msg
+
+    def close(self):
+        self._conn.close()
+
+        # note that self.file == response.fp, which gets closed by the
+        # superclass. just clear the object ref here.
+        ### hmm. messy. if status==-1, then self.file is owned by us.
+        ### well... we aren't explicitly closing, but losing this ref will
+        ### do it
+        self.file = None
+
+try:
+    import ssl
+except ImportError:
+    pass
+else:
+    class HTTPSConnection(HTTPConnection):
+        "This class allows communication via SSL."
+
+        default_port = HTTPS_PORT
+
+        def __init__(self, host, port=None, key_file=None, cert_file=None,
+                     strict=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT,
+                     source_address=None):
+            HTTPConnection.__init__(self, host, port, strict, timeout,
+                                    source_address)
+            self.key_file = key_file
+            self.cert_file = cert_file
+
+        def connect(self):
+            "Connect to a host on a given (SSL) port."
+
+            sock = socket.create_connection((self.host, self.port),
+                                            self.timeout, self.source_address)
+            if self._tunnel_host:
+                self.sock = sock
+                self._tunnel()
+            self.sock = ssl.wrap_socket(sock, self.key_file, self.cert_file)
+
+    __all__.append("HTTPSConnection")
+
+    class HTTPS(HTTP):
+        """Compatibility with 1.5 httplib interface
+
+        Python 1.5.2 did not have an HTTPS class, but it defined an
+        interface for sending http requests that is also useful for
+        https.
+        """
+
+        _connection_class = HTTPSConnection
+
+        def __init__(self, host='', port=None, key_file=None, cert_file=None,
+                     strict=None):
+            # provide a default host, pass the X509 cert info
+
+            # urf. compensate for bad input.
+            if port == 0:
+                port = None
+            self._setup(self._connection_class(host, port, key_file,
+                                               cert_file, strict))
+
+            # we never actually use these for anything, but we keep them
+            # here for compatibility with post-1.5.2 CVS.
+            self.key_file = key_file
+            self.cert_file = cert_file
+
+
+    def FakeSocket (sock, sslobj):
+        warnings.warn("FakeSocket is deprecated, and won't be in 3.x.  " +
+                      "Use the result of ssl.wrap_socket() directly instead.",
+                      DeprecationWarning, stacklevel=2)
+        return sslobj
+
+
+class HTTPException(Exception):
+    # Subclasses that define an __init__ must call Exception.__init__
+    # or define self.args.  Otherwise, str() will fail.
+    pass
+
+class NotConnected(HTTPException):
+    pass
+
+class InvalidURL(HTTPException):
+    pass
+
+class UnknownProtocol(HTTPException):
+    def __init__(self, version):
+        self.args = version,
+        self.version = version
+
+class UnknownTransferEncoding(HTTPException):
+    pass
+
+class UnimplementedFileMode(HTTPException):
+    pass
+
+class IncompleteRead(HTTPException):
+    def __init__(self, partial, expected=None):
+        self.args = partial,
+        self.partial = partial
+        self.expected = expected
+    def __repr__(self):
+        if self.expected is not None:
+            e = ', %i more expected' % self.expected
+        else:
+            e = ''
+        return 'IncompleteRead(%i bytes read%s)' % (len(self.partial), e)
+    def __str__(self):
+        return repr(self)
+
+class ImproperConnectionState(HTTPException):
+    pass
+
+class CannotSendRequest(ImproperConnectionState):
+    pass
+
+class CannotSendHeader(ImproperConnectionState):
+    pass
+
+class ResponseNotReady(ImproperConnectionState):
+    pass
+
+class BadStatusLine(HTTPException):
+    def __init__(self, line):
+        if not line:
+            line = repr(line)
+        self.args = line,
+        self.line = line
+
+class LineTooLong(HTTPException):
+    def __init__(self, line_type):
+        HTTPException.__init__(self, "got more than %d bytes when reading %s"
+                                     % (_MAXLINE, line_type))
+
+# for backwards compatibility
+error = HTTPException
+
+class LineAndFileWrapper:
+    """A limited file-like object for HTTP/0.9 responses."""
+
+    # The status-line parsing code calls readline(), which normally
+    # get the HTTP status line.  For a 0.9 response, however, this is
+    # actually the first line of the body!  Clients need to get a
+    # readable file object that contains that line.
+
+    def __init__(self, line, file):
+        self._line = line
+        self._file = file
+        self._line_consumed = 0
+        self._line_offset = 0
+        self._line_left = len(line)
+
+    def __getattr__(self, attr):
+        return getattr(self._file, attr)
+
+    def _done(self):
+        # called when the last byte is read from the line.  After the
+        # call, all read methods are delegated to the underlying file
+        # object.
+        self._line_consumed = 1
+        self.read = self._file.read
+        self.readline = self._file.readline
+        self.readlines = self._file.readlines
+
+    def read(self, amt=None):
+        if self._line_consumed:
+            return self._file.read(amt)
+        assert self._line_left
+        if amt is None or amt > self._line_left:
+            s = self._line[self._line_offset:]
+            self._done()
+            if amt is None:
+                return s + self._file.read()
+            else:
+                return s + self._file.read(amt - len(s))
+        else:
+            assert amt <= self._line_left
+            i = self._line_offset
+            j = i + amt
+            s = self._line[i:j]
+            self._line_offset = j
+            self._line_left -= amt
+            if self._line_left == 0:
+                self._done()
+            return s
+
+    def readline(self):
+        if self._line_consumed:
+            return self._file.readline()
+        assert self._line_left
+        s = self._line[self._line_offset:]
+        self._done()
+        return s
+
+    def readlines(self, size=None):
+        if self._line_consumed:
+            return self._file.readlines(size)
+        assert self._line_left
+        L = [self._line[self._line_offset:]]
+        self._done()
+        if size is None:
+            return L + self._file.readlines()
+        else:
+            return L + self._file.readlines(size)