diff options
Diffstat (limited to 'lib/python2.7/config/Setup')
| -rw-r--r-- | lib/python2.7/config/Setup | 500 |
1 files changed, 0 insertions, 500 deletions
diff --git a/lib/python2.7/config/Setup b/lib/python2.7/config/Setup deleted file mode 100644 index 0720feb..0000000 --- a/lib/python2.7/config/Setup +++ /dev/null @@ -1,500 +0,0 @@ -# -*- makefile -*- -# The file Setup is used by the makesetup script to construct the files -# Makefile and config.c, from Makefile.pre and config.c.in, -# respectively. The file Setup itself is initially copied from -# Setup.dist; once it exists it will not be overwritten, so you can edit -# Setup to your heart's content. Note that Makefile.pre is created -# from Makefile.pre.in by the toplevel configure script. - -# (VPATH notes: Setup and Makefile.pre are in the build directory, as -# are Makefile and config.c; the *.in and *.dist files are in the source -# directory.) - -# Each line in this file describes one or more optional modules. -# Modules enabled here will not be compiled by the setup.py script, -# so the file can be used to override setup.py's behavior. - -# Lines have the following structure: -# -# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...] -# -# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files) -# <cpparg> is anything starting with -I, -D, -U or -C -# <library> is anything ending in .a or beginning with -l or -L -# <module> is anything else but should be a valid Python -# identifier (letters, digits, underscores, beginning with non-digit) -# -# (As the makesetup script changes, it may recognize some other -# arguments as well, e.g. *.so and *.sl as libraries. See the big -# case statement in the makesetup script.) -# -# Lines can also have the form -# -# <name> = <value> -# -# which defines a Make variable definition inserted into Makefile.in -# -# Finally, if a line contains just the word "*shared*" (without the -# quotes but with the stars), then the following modules will not be -# built statically. The build process works like this: -# -# 1. Build all modules that are declared as static in Modules/Setup, -# combine them into libpythonxy.a, combine that into python. -# 2. Build all modules that are listed as shared in Modules/Setup. -# 3. Invoke setup.py. That builds all modules that -# a) are not builtin, and -# b) are not listed in Modules/Setup, and -# c) can be build on the target -# -# Therefore, modules declared to be shared will not be -# included in the config.c file, nor in the list of objects to be -# added to the library archive, and their linker options won't be -# added to the linker options. Rules to create their .o files and -# their shared libraries will still be added to the Makefile, and -# their names will be collected in the Make variable SHAREDMODS. This -# is used to build modules as shared libraries. (They can be -# installed using "make sharedinstall", which is implied by the -# toplevel "make install" target.) (For compatibility, -# *noconfig* has the same effect as *shared*.) -# -# In addition, *static* explicitly declares the following modules to -# be static. Lines containing "*static*" and "*shared*" may thus -# alternate throughout this file. - -# NOTE: As a standard policy, as many modules as can be supported by a -# platform should be present. The distribution comes with all modules -# enabled that are supported by most platforms and don't require you -# to ftp sources from elsewhere. - - -# Some special rules to define PYTHONPATH. -# Edit the definitions below to indicate which options you are using. -# Don't add any whitespace or comments! - -# Directories where library files get installed. -# DESTLIB is for Python modules; MACHDESTLIB for shared libraries. -DESTLIB=$(LIBDEST) -MACHDESTLIB=$(BINLIBDEST) - -# NOTE: all the paths are now relative to the prefix that is computed -# at run time! - -# Standard path -- don't edit. -# No leading colon since this is the first entry. -# Empty since this is now just the runtime prefix. -DESTPATH= - -# Site specific path components -- should begin with $(DELIM) if non-empty -SITEPATH= - -# Standard path components for test modules -TESTPATH= - -# Path components for machine- or system-dependent modules and shared libraries -MACHDEPPATH=$(DELIM)plat-$(MACHDEP) -EXTRAMACHDEPPATH= - -# Path component for the Tkinter-related modules -# The TKPATH variable is always enabled, to save you the effort. -TKPATH=$(DELIM)lib-tk - -# Path component for old modules. -OLDPATH=$(DELIM)lib-old - -COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)$(OLDPATH) -PYTHONPATH=$(COREPYTHONPATH) - - -# The modules listed here can't be built as shared libraries for -# various reasons; therefore they are listed here instead of in the -# normal order. - -# This only contains the minimal set of modules required to run the -# setup.py script in the root of the Python source tree. - -errno errnomodule.c # posix (UNIX) errno values -#FIXME: setup.py detect this module along with grp and spwd. -#FIXME: what about to comment ? -#pwd pwdmodule.c # this is needed to find out the user's home dir - # if $HOME is not set -_sre _sre.c # Fredrik Lundh's new regular expressions -_codecs _codecsmodule.c # access to the builtin codecs and codec registry -_weakref _weakref.c # weak references - -# The zipimport module is always imported at startup. Having it as a -# builtin module avoids some bootstrapping problems and reduces overhead. -zipimport zipimport.c - -# The rest of the modules listed in this file are all commented out by -# default. Usually they can be detected and built as dynamically -# loaded modules by the new setup.py script added in Python 2.1. If -# you're on a platform that doesn't support dynamic loading, want to -# compile modules statically into the Python binary, or need to -# specify some odd set of compiler switches, you can uncomment the -# appropriate lines below. - -# ====================================================================== - -# The Python symtable module depends on .h files that setup.py doesn't track -_symtable symtablemodule.c - -# The SGI specific GL module: - -GLHACK=-Dclear=__GLclear -#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 - -# Pure module. Cannot be linked dynamically. -# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE -#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE -#PURE_INCLS=-I/usr/local/include -#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs -#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) - -# Uncommenting the following line tells makesetup that all following -# modules are to be built as shared libraries (see above for more -# detail; also note that *static* reverses this effect): - -#*shared* - -# GNU readline. Unlike previous Python incarnations, GNU readline is -# now incorporated in an optional module, configured in the Setup file -# instead of by a configure script switch. You may have to insert a -# -L option pointing to the directory where libreadline.* lives, -# and you may have to change -ltermcap to -ltermlib or perhaps remove -# it, depending on your system -- see the GNU readline instructions. -# It's okay for this to be a shared library, too. - -#readline readline.c -lreadline -ltermcap - - -# Modules that should always be present (non UNIX dependent): - -#array arraymodule.c # array objects -#cmath cmathmodule.c _math.c # -lm # complex math library functions -#math mathmodule.c _math.c # -lm # math library functions, e.g. sin() -#_struct _struct.c # binary structure packing/unpacking -#time timemodule.c # -lm # time operations and variables -#operator operator.c # operator.add() and similar goodies -#_testcapi _testcapimodule.c # Python C API test module -#_random _randommodule.c # Random number generator -#_collections _collectionsmodule.c # Container types -#_heapq _heapqmodule.c # Heapq type -#itertools itertoolsmodule.c # Functions creating iterators for efficient looping -#strop stropmodule.c # String manipulations -#_functools _functoolsmodule.c # Tools for working with functions and callable objects -#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator -#_pickle _pickle.c # pickle accelerator -#datetime datetimemodule.c # date/time type -#_bisect _bisectmodule.c # Bisection algorithms - -#unicodedata unicodedata.c # static Unicode character database - -# access to ISO C locale support -#_locale _localemodule.c # -lintl - -# Standard I/O baseline -#_io -I$(srcdir)/Modules/_io _io/bufferedio.c _io/bytesio.c _io/fileio.c _io/iobase.c _io/_iomodule.c _io/stringio.c _io/textio.c - - -# Modules with some UNIX dependencies -- on by default: -# (If you have a really backward UNIX, select and socket may not be -# supported...) - -#fcntl fcntlmodule.c # fcntl(2) and ioctl(2) -#spwd spwdmodule.c # spwd(3) -#grp grpmodule.c # grp(3) -#select selectmodule.c # select(2); not on ancient System V - -# Memory-mapped files (also works on Win32). -#mmap mmapmodule.c - -# CSV file helper -#_csv _csv.c - -# Socket module helper for socket(2) -#_socket socketmodule.c timemodule.c - -# Socket module helper for SSL support; you must comment out the other -# socket line above, and possibly edit the SSL variable: -#SSL=/usr/local/ssl -#_ssl _ssl.c \ -# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ -# -L$(SSL)/lib -lssl -lcrypto - -# The crypt module is now disabled by default because it breaks builds -# on many systems (where -lcrypt is needed), e.g. Linux (I believe). -# -# First, look at Setup.config; configure may have set this for you. - -#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems - - -# Some more UNIX dependent modules -- off by default, since these -# are not supported by all UNIX systems: - -#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere -#termios termios.c # Steen Lumholt's termios module -#resource resource.c # Jeremy Hylton's rlimit interface - - -# Multimedia modules -- off by default. -# These don't work for 64-bit platforms!!! -# #993173 says audioop works on 64-bit platforms, though. -# These represent audio samples or images as strings: - -#audioop audioop.c # Operations on audio samples -#imageop imageop.c # Operations on images - - -# Note that the _md5 and _sha modules are normally only built if the -# system does not have the OpenSSL libs containing an optimized version. - -# The _md5 module implements the RSA Data Security, Inc. MD5 -# Message-Digest Algorithm, described in RFC 1321. The necessary files -# md5.c and md5.h are included here. - -#_md5 md5module.c md5.c - - -# The _sha module implements the SHA checksum algorithms. -# (NIST's Secure Hash Algorithms.) -#_sha shamodule.c -#_sha256 sha256module.c -#_sha512 sha512module.c - - -# SGI IRIX specific modules -- off by default. - -# These module work on any SGI machine: - -# *** gl must be enabled higher up in this file *** -#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager -#sgi sgimodule.c # sgi.nap() and a few more - -# This module requires the header file -# /usr/people/4Dgifts/iristools/include/izoom.h: -#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities - - -# These modules require the Multimedia Development Option (I think): - -#al almodule.c -laudio # Audio Library -#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library -#cl clmodule.c -lcl -lawareaudio # Compression Library -#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video - - -# The FORMS library, by Mark Overmars, implements user interface -# components such as dialogs and buttons using SGI's GL and FM -# libraries. You must ftp the FORMS library separately from -# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. -# NOTE: if you want to be able to use FORMS and curses simultaneously -# (or both link them statically into the same binary), you must -# compile all of FORMS with the cc option "-Dclear=__GLclear". - -# The FORMS variable must point to the FORMS subdirectory of the forms -# toplevel directory: - -#FORMS=/ufs/guido/src/forms/FORMS -#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl - - -# SunOS specific modules -- off by default: - -#sunaudiodev sunaudiodev.c - - -# A Linux specific module -- off by default; this may also work on -# some *BSDs. - -#linuxaudiodev linuxaudiodev.c - - -# George Neville-Neil's timing module: - -#timing timingmodule.c - - -# The _tkinter module. -# -# The command for _tkinter is long and site specific. Please -# uncomment and/or edit those parts as indicated. If you don't have a -# specific extension (e.g. Tix or BLT), leave the corresponding line -# commented out. (Leave the trailing backslashes in! If you -# experience strange errors, you may want to join all uncommented -# lines and remove the backslashes -- the backslash interpretation is -# done by the shell's "read" command and it may not be implemented on -# every system. - -# *** Always uncomment this (leave the leading underscore in!): -# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \ -# *** Uncomment and edit to reflect where your Tcl/Tk libraries are: -# -L/usr/local/lib \ -# *** Uncomment and edit to reflect where your Tcl/Tk headers are: -# -I/usr/local/include \ -# *** Uncomment and edit to reflect where your X11 header files are: -# -I/usr/X11R6/include \ -# *** Or uncomment this for Solaris: -# -I/usr/openwin/include \ -# *** Uncomment and edit for Tix extension only: -# -DWITH_TIX -ltix8.1.8.2 \ -# *** Uncomment and edit for BLT extension only: -# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \ -# *** Uncomment and edit for PIL (TkImaging) extension only: -# (See http://www.pythonware.com/products/pil/ for more info) -# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \ -# *** Uncomment and edit for TOGL extension only: -# -DWITH_TOGL togl.c \ -# *** Uncomment and edit to reflect your Tcl/Tk versions: -# -ltk8.2 -ltcl8.2 \ -# *** Uncomment and edit to reflect where your X11 libraries are: -# -L/usr/X11R6/lib \ -# *** Or uncomment this for Solaris: -# -L/usr/openwin/lib \ -# *** Uncomment these for TOGL extension only: -# -lGL -lGLU -lXext -lXmu \ -# *** Uncomment for AIX: -# -lld \ -# *** Always uncomment this; X11 libraries to link with: -# -lX11 - -# Lance Ellinghaus's syslog module -#syslog syslogmodule.c # syslog daemon interface - - -# Curses support, requring the System V version of curses, often -# provided by the ncurses library. e.g. on Linux, link with -lncurses -# instead of -lcurses). -# -# First, look at Setup.config; configure may have set this for you. - -#_curses _cursesmodule.c -lcurses -ltermcap -# Wrapper for the panel library that's part of ncurses and SYSV curses. -#_curses_panel _curses_panel.c -lpanel -lncurses - - -# Generic (SunOS / SVR4) dynamic loading module. -# This is not needed for dynamic loading of Python modules -- -# it is a highly experimental and dangerous device for calling -# *arbitrary* C functions in *arbitrary* shared libraries: - -#dl dlmodule.c - - -# Modules that provide persistent dictionary-like semantics. You will -# probably want to arrange for at least one of them to be available on -# your machine, though none are defined by default because of library -# dependencies. The Python module anydbm.py provides an -# implementation independent wrapper for these; dumbdbm.py provides -# similar functionality (but slower of course) implemented in Python. - -# The standard Unix dbm module has been moved to Setup.config so that -# it will be compiled as a shared library by default. Compiling it as -# a built-in module causes conflicts with the pybsddb3 module since it -# creates a static dependency on an out-of-date version of db.so. -# -# First, look at Setup.config; configure may have set this for you. - -#dbm dbmmodule.c # dbm(3) may require -lndbm or similar - -# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm: -# -# First, look at Setup.config; configure may have set this for you. - -#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm - - -# Sleepycat Berkeley DB interface. -# -# This requires the Sleepycat DB code, see http://www.sleepycat.com/ -# The earliest supported version of that library is 3.0, the latest -# supported version is 4.0 (4.1 is specifically not supported, as that -# changes the semantics of transactional databases). A list of available -# releases can be found at -# -# http://www.sleepycat.com/update/index.html -# -# Edit the variables DB and DBLIBVERto point to the db top directory -# and the subdirectory of PORT where you built it. -#DB=/usr/local/BerkeleyDB.4.0 -#DBLIBVER=4.0 -#DBINC=$(DB)/include -#DBLIB=$(DB)/lib -#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER) - -# Historical Berkeley DB 1.85 -# -# This module is deprecated; the 1.85 version of the Berkeley DB library has -# bugs that can cause data corruption. If you can, use later versions of the -# library instead, available from <http://www.sleepycat.com/>. - -#DB=/depot/sundry/src/berkeley-db/db.1.85 -#DBPORT=$(DB)/PORT/irix.5.3 -#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a - - - -# Helper module for various ascii-encoders -#binascii binascii.c - -# Fred Drake's interface to the Python parser -#parser parsermodule.c - -# cStringIO and cPickle -#cStringIO cStringIO.c -#cPickle cPickle.c - - -# Lee Busby's SIGFPE modules. -# The library to link fpectl with is platform specific. -# Choose *one* of the options below for fpectl: - -# For SGI IRIX (tested on 5.3): -#fpectl fpectlmodule.c -lfpe - -# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2): -# (Without the compiler you don't have -lsunmath.) -#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm - -# For other systems: see instructions in fpectlmodule.c. -#fpectl fpectlmodule.c ... - -# Test module for fpectl. No extra libraries needed. -#fpetest fpetestmodule.c - -# Andrew Kuchling's zlib module. -# This require zlib 1.1.3 (or later). -# See http://www.gzip.org/zlib/ -#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz - -# Interface to the Expat XML parser -# -# Expat was written by James Clark and is now maintained by a group of -# developers on SourceForge; see www.libexpat.org for more -# information. The pyexpat module was written by Paul Prescod after a -# prototype by Jack Jansen. Source of Expat 1.95.2 is included in -# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is -# not advised. -# -# More information on Expat can be found at www.libexpat.org. -# -#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI - - -# Hye-Shik Chang's CJKCodecs - -# multibytecodec is required for all the other CJK codec modules -#_multibytecodec cjkcodecs/multibytecodec.c - -#_codecs_cn cjkcodecs/_codecs_cn.c -#_codecs_hk cjkcodecs/_codecs_hk.c -#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c -#_codecs_jp cjkcodecs/_codecs_jp.c -#_codecs_kr cjkcodecs/_codecs_kr.c -#_codecs_tw cjkcodecs/_codecs_tw.c - -# Example -- included for reference only: -# xx xxmodule.c - -# Another example -- the 'xxsubtype' module shows C-level subtyping in action -xxsubtype xxsubtype.c |