/* * Copyright (C) 2017 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef LOG_TAG #define LOG_TAG "bpfloader" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "bpf/BpfUtils.h" using android::base::EndsWith; using android::bpf::domain; using std::string; bool exists(const char* const path) { int v = access(path, F_OK); if (!v) { ALOGI("%s exists.", path); return true; } if (errno == ENOENT) return false; ALOGE("FATAL: access(%s, F_OK) -> %d [%d:%s]", path, v, errno, strerror(errno)); abort(); // can only hit this if permissions (likely selinux) are screwed up } bool isInProcessTethering() { bool in = exists("/apex/com.android.tethering/etc/flag/in-process"); bool out = exists("/apex/com.android.tethering/etc/flag/out-of-process"); if (in && out) abort(); // bad build // Handle cases where the module explicitly tells us if (in) return true; if (out) return false; ALOGE("FATAL: cannot determine if Tethering is in or out of process."); abort(); } constexpr unsigned long long kTetheringApexDomainBitmask = domainToBitmask(domain::tethering) | domainToBitmask(domain::net_private) | domainToBitmask(domain::net_shared) | domainToBitmask(domain::netd_readonly) | domainToBitmask(domain::netd_shared); // Programs shipped inside the tethering apex should be limited to networking stuff, // as KPROBE, PERF_EVENT, TRACEPOINT are dangerous to use from mainline updatable code, // since they are less stable abi/api and may conflict with platform uses of bpf. constexpr bpf_prog_type kTetheringApexAllowedProgTypes[] = { BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_PROG_TYPE_CGROUP_SKB, BPF_PROG_TYPE_CGROUP_SOCK, BPF_PROG_TYPE_SCHED_ACT, BPF_PROG_TYPE_SCHED_CLS, BPF_PROG_TYPE_SOCKET_FILTER, BPF_PROG_TYPE_XDP, }; // Networking-related program types are limited to the Tethering Apex // to prevent things from breaking due to conflicts on mainline updates // (exception made for socket filters, ie. xt_bpf for potential use in iptables, // or for attaching to sockets directly) constexpr bpf_prog_type kPlatformAllowedProgTypes[] = { BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_SOCKET_FILTER, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_UNSPEC, // Will be replaced with fuse bpf program type }; // see b/162057235. For arbitrary program types, the concern is that due to the lack of // SELinux access controls over BPF program attachpoints, we have no way to control the // attachment of programs to shared resources (or to detect when a shared resource // has one BPF program replace another that is attached there) constexpr bpf_prog_type kVendorAllowedProgTypes[] = { BPF_PROG_TYPE_SOCKET_FILTER, }; struct Location { const char* const dir; const char* const prefix; unsigned long long allowedDomainBitmask; const bpf_prog_type* allowedProgTypes = nullptr; size_t allowedProgTypesLength = 0; }; const Location locations[] = { // S+ Tethering mainline module (network_stack): tether offload { .dir = "/apex/com.android.tethering/etc/bpf/", .prefix = "tethering/", .allowedDomainBitmask = kTetheringApexDomainBitmask, .allowedProgTypes = kTetheringApexAllowedProgTypes, .allowedProgTypesLength = arraysize(kTetheringApexAllowedProgTypes), }, // T+ Tethering mainline module (shared with netd & system server) // netutils_wrapper (for iptables xt_bpf) has access to programs { .dir = "/apex/com.android.tethering/etc/bpf/netd_shared/", .prefix = "netd_shared/", .allowedDomainBitmask = kTetheringApexDomainBitmask, .allowedProgTypes = kTetheringApexAllowedProgTypes, .allowedProgTypesLength = arraysize(kTetheringApexAllowedProgTypes), }, // T+ Tethering mainline module (shared with netd & system server) // netutils_wrapper has no access, netd has read only access { .dir = "/apex/com.android.tethering/etc/bpf/netd_readonly/", .prefix = "netd_readonly/", .allowedDomainBitmask = kTetheringApexDomainBitmask, .allowedProgTypes = kTetheringApexAllowedProgTypes, .allowedProgTypesLength = arraysize(kTetheringApexAllowedProgTypes), }, // T+ Tethering mainline module (shared with system server) { .dir = "/apex/com.android.tethering/etc/bpf/net_shared/", .prefix = "net_shared/", .allowedDomainBitmask = kTetheringApexDomainBitmask, .allowedProgTypes = kTetheringApexAllowedProgTypes, .allowedProgTypesLength = arraysize(kTetheringApexAllowedProgTypes), }, // T+ Tethering mainline module (not shared, just network_stack) { .dir = "/apex/com.android.tethering/etc/bpf/net_private/", .prefix = "net_private/", .allowedDomainBitmask = kTetheringApexDomainBitmask, .allowedProgTypes = kTetheringApexAllowedProgTypes, .allowedProgTypesLength = arraysize(kTetheringApexAllowedProgTypes), }, // Core operating system { .dir = "/system/etc/bpf/", .prefix = "", .allowedDomainBitmask = domainToBitmask(domain::platform), .allowedProgTypes = kPlatformAllowedProgTypes, .allowedProgTypesLength = arraysize(kPlatformAllowedProgTypes), }, // Vendor operating system { .dir = "/vendor/etc/bpf/", .prefix = "vendor/", .allowedDomainBitmask = domainToBitmask(domain::vendor), .allowedProgTypes = kVendorAllowedProgTypes, .allowedProgTypesLength = arraysize(kVendorAllowedProgTypes), }, }; int loadAllElfObjects(const Location& location) { int retVal = 0; DIR* dir; struct dirent* ent; if ((dir = opendir(location.dir)) != NULL) { while ((ent = readdir(dir)) != NULL) { string s = ent->d_name; if (!EndsWith(s, ".o")) continue; string progPath(location.dir); progPath += s; bool critical; int ret = android::bpf::loadProg(progPath.c_str(), &critical, location.prefix, location.allowedDomainBitmask, location.allowedProgTypes, location.allowedProgTypesLength); if (ret) { if (critical) retVal = ret; ALOGE("Failed to load object: %s, ret: %s", progPath.c_str(), std::strerror(-ret)); } else { ALOGI("Loaded object: %s", progPath.c_str()); } } closedir(dir); } return retVal; } int createSysFsBpfSubDir(const char* const prefix) { if (*prefix) { mode_t prevUmask = umask(0); string s = "/sys/fs/bpf/"; s += prefix; errno = 0; int ret = mkdir(s.c_str(), S_ISVTX | S_IRWXU | S_IRWXG | S_IRWXO); if (ret && errno != EEXIST) { const int err = errno; ALOGE("Failed to create directory: %s, ret: %s", s.c_str(), std::strerror(err)); return -err; } umask(prevUmask); } return 0; } // Technically 'value' doesn't need to be newline terminated, but it's best // to include a newline to match 'echo "value" > /proc/sys/...foo' behaviour, // which is usually how kernel devs test the actual sysctl interfaces. int writeProcSysFile(const char *filename, const char *value) { android::base::unique_fd fd(open(filename, O_WRONLY | O_CLOEXEC)); if (fd < 0) { const int err = errno; ALOGE("open('%s', O_WRONLY | O_CLOEXEC) -> %s", filename, strerror(err)); return -err; } int len = strlen(value); int v = write(fd, value, len); if (v < 0) { const int err = errno; ALOGE("write('%s', '%s', %d) -> %s", filename, value, len, strerror(err)); return -err; } if (v != len) { // In practice, due to us only using this for /proc/sys/... files, this can't happen. ALOGE("write('%s', '%s', %d) -> short write [%d]", filename, value, len, v); return -EINVAL; } return 0; } int main(int argc, char** argv) { (void)argc; android::base::InitLogging(argv, &android::base::KernelLogger); // Linux 5.16-rc1 changed the default to 2 (disabled but changeable), but we need 0 (enabled) // (this writeFile is known to fail on at least 4.19, but always defaults to 0 on pre-5.13, // on 5.13+ it depends on CONFIG_BPF_UNPRIV_DEFAULT_OFF) if (writeProcSysFile("/proc/sys/kernel/unprivileged_bpf_disabled", "0\n") && android::bpf::isAtLeastKernelVersion(5, 13, 0)) return 1; // Enable the eBPF JIT -- but do note that on 64-bit kernels it is likely // already force enabled by the kernel config option BPF_JIT_ALWAYS_ON if (writeProcSysFile("/proc/sys/net/core/bpf_jit_enable", "1\n")) return 1; // Enable JIT kallsyms export for privileged users only if (writeProcSysFile("/proc/sys/net/core/bpf_jit_kallsyms", "1\n")) return 1; // This is ugly... but this allows InProcessTethering which runs as system_server, // instead of as network_stack to access /sys/fs/bpf/tethering, which would otherwise // (due to genfscon rules) have fs_bpf_tethering selinux context, which is restricted // to the network_stack process only (which is where out of process tethering runs) if (isInProcessTethering() && !exists("/sys/fs/bpf/tethering")) { if (createSysFsBpfSubDir(/* /sys/fs/bpf/ */ "net_shared")) return 1; if (createSysFsBpfSubDir(/* /sys/fs/bpf/ */ "net_shared/tethering")) return 1; /* /sys/fs/bpf/tethering -> net_shared/tethering */ if (symlink("net_shared/tethering", "/sys/fs/bpf/tethering")) { ALOGE("symlink(net_shared/tethering, /sys/fs/bpf/tethering) -> %s", strerror(errno)); return 1; } } // Create all the pin subdirectories // (this must be done first to allow selinux_context and pin_subdir functionality, // which could otherwise fail with ENOENT during object pinning or renaming, // due to ordering issues) for (const auto& location : locations) { if (createSysFsBpfSubDir(location.prefix)) return 1; } // Note: there's no actual src dir for fs_bpf_loader .o's, // so it is not listed in 'locations[].prefix'. // This is because this is primarily meant for triggering genfscon rules, // and as such this will likely always be the case. // Thus we need to manually create the /sys/fs/bpf/loader subdirectory. if (createSysFsBpfSubDir("loader")) return 1; // Load all ELF objects, create programs and maps, and pin them for (const auto& location : locations) { if (loadAllElfObjects(location) != 0) { ALOGE("=== CRITICAL FAILURE LOADING BPF PROGRAMS FROM %s ===", location.dir); ALOGE("If this triggers reliably, you're probably missing kernel options or patches."); ALOGE("If this triggers randomly, you might be hitting some memory allocation " "problems or startup script race."); ALOGE("--- DO NOT EXPECT SYSTEM TO BOOT SUCCESSFULLY ---"); sleep(20); return 2; } } int key = 1; int value = 123; android::base::unique_fd map( android::bpf::createMap(BPF_MAP_TYPE_ARRAY, sizeof(key), sizeof(value), 2, 0)); if (android::bpf::writeToMapEntry(map, &key, &value, BPF_ANY)) { ALOGE("Critical kernel bug - failure to write into index 1 of 2 element bpf map array."); return 1; } if (android::base::SetProperty("bpf.progs_loaded", "1") == false) { ALOGE("Failed to set bpf.progs_loaded property"); return 1; } return 0; }