diff options
| author | Dmitry Shmidt <dimitrysh@google.com> | 2009-05-12 12:22:02 -0700 |
|---|---|---|
| committer | Dmitry Shmidt <dimitrysh@google.com> | 2009-05-12 12:22:02 -0700 |
| commit | 981801b95b81e6d1c7a2085967406e86af0f08fc (patch) | |
| tree | 3cf403b311a43d23c0b605827913f9637b136763 /wilink_6_1/utils/CmdInterfaceCodes.h | |
| parent | 02d7515eca810acbc93be9324751d712af6d38c7 (diff) | |
| download | ti-981801b95b81e6d1c7a2085967406e86af0f08fc.tar.gz | |
Initial code package of WiLink_Driver_6.1.0.0.84
Diffstat (limited to 'wilink_6_1/utils/CmdInterfaceCodes.h')
| -rw-r--r-- | wilink_6_1/utils/CmdInterfaceCodes.h | 1325 |
1 files changed, 1325 insertions, 0 deletions
diff --git a/wilink_6_1/utils/CmdInterfaceCodes.h b/wilink_6_1/utils/CmdInterfaceCodes.h new file mode 100644 index 0000000..5ae59d5 --- /dev/null +++ b/wilink_6_1/utils/CmdInterfaceCodes.h @@ -0,0 +1,1325 @@ +/* + * CmdInterfaceCodes.h + * + * Copyright(c) 1998 - 2009 Texas Instruments. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/****************************************************************************/ +/* */ +/* MODULE: CmdInterfaceCodes.h */ +/* PURPOSE: */ +/* */ +/****************************************************************************/ +#ifndef _CMD_INTERFACE_CODES_H_ +#define _CMD_INTERFACE_CODES_H_ + +/** \file CmdInterfaceCodes.h + * \brief Command Interface Codes + * \n\n + * This file contains the definitions for the parameters that can be Set/Get from outside user. + * \n\n + */ + +#include "TWDriver.h" + +/* defines */ +/***********/ + +/* types */ +/*********/ + + +/* This file contains the definitions for the parameters that can be Set/Get from outside. + The parmeters that can be Set/Get from inside the driver only are defined in the file paramIn.h */ + +/**************************************************************************** + PARAMETERS ISSUE + Each parameter in the system is defined as UINT32. The parameter + structue is as following: + + bit 31 30 - 24 23 22 - 16 15 - 8 7 - 0 + +-----+----------+-----+----------+-----------+-----------+ + | Set | Reserved | Get | Reserved | Module | Parameter | + | bit | | bit | | number | number | + +-----+----------+-----+----------+-----------+-----------+ + + The 'set' bit indicates whteher this parameter can be set from OS abstraction layer. + The 'get' bit indicates whteher this parameter can be get from OS abstraction layer. + (All the parameters can be Get/Set from insied the driver.) + The module number indicated who is the oner of the parameter. + The parameter number is the parameter unique number used to identify it. + +****************************************************************************/ + +/** \def SET_BIT + * \brief Bitmaks of bit which indicates if the Command is SET Command + */ +#define SET_BIT 0x08000000 +/** \def GET_BIT + * \brief Bitmaks of bit which indicates if the Command is GET Command + */ +#define GET_BIT 0x00800000 +/** \def ASYNC_PARAM + * \brief Bitmaks of bit which indicates if the access to the Command Parameter is Async + */ +#define ASYNC_PARAM 0x00010000 +/** \def ALLOC_NEEDED_PARAM + * \brief Bitmaks of bit which indicates if that the data is not allocated in the paramInfo structure + */ +#define ALLOC_NEEDED_PARAM 0x00020000 + + +/** \def GET_PARAM_MODULE_NUMBER + * \brief Macro which gets the Parameter's Module Number from the second byte of x \n + * x should be taken from Module Parameters Enumeration + * sa EModuleParam + */ +#define GET_PARAM_MODULE_NUMBER(x) ((x & 0x0000FF00) >> 8) +/** \def IS_PARAM_ASYNC + * \brief Macro which returns True if access to the Command Parameter is Async \n + * Otherwise returns False + */ +#define IS_PARAM_ASYNC(x) (x & ASYNC_PARAM) +/** \def IS_ALLOC_NEEDED_PARAM + * \brief Macro which returns True if data is not allocated in the paramInfo structure \n + * (there is a need to allocate memory for data). Otherwise returns False + */ +#define IS_ALLOC_NEEDED_PARAM(x) (x & ALLOC_NEEDED_PARAM) +/** \def IS_PARAM_FOR_MODULE + * \brief Macro which returns True if input param is for input module. \n + * Otherwise returns False + */ +#define IS_PARAM_FOR_MODULE(param, module) ((param & 0x0000FF00) == module) + +/** \enum EModuleParam + * \brief Modules Parameters ID + * + * \par Description + * This Enumeration defines all available Modules numbers. \n + * Note that the actual number is held in the second byte (E.g. 0x0000FF00). \n + * According to these numbers it is decided to which Module the Command Parameter is destined + * + * \sa + */ +/* NOTICE! whenever you add a module, you have to increment MAX_PARAM_MODULE_NUMBER as well!!! */ +typedef enum +{ + DRIVER_MODULE_PARAM = 0x0000, /**< Driver Module Number */ + AUTH_MODULE_PARAM = 0x0100, /**< Authentication Module Number */ + ASSOC_MODULE_PARAM = 0x0200, /**< Association Module Number */ + RX_DATA_MODULE_PARAM = 0x0300, /**< RX Data Module Number */ + TX_CTRL_MODULE_PARAM = 0x0400, /**< TX Control Module Number */ + CTRL_DATA_MODULE_PARAM = 0x0500, /**< Control Data Module Number */ + SITE_MGR_MODULE_PARAM = 0x0600, /**< Site Manager Module Number */ + CONN_MODULE_PARAM = 0x0700, /**< Connection Module Number */ + RSN_MODULE_PARAM = 0x0800, /**< Robust Security NW (RSN) Module Number */ + ADM_CTRL_MODULE_PARAM = 0x0900, /**< ADM Control Module Number */ + TWD_MODULE_PARAM = 0x0A00, /**< Report Module Number */ + REPORT_MODULE_PARAM = 0x0B00, /**< Report Module Number */ + SME_MODULE_PARAM = 0x0C00, /**< SME Module Number */ + MLME_SM_MODULE_PARAM = 0x0D00, /**< 802.11 MLME State-Machine Module Number */ + REGULATORY_DOMAIN_MODULE_PARAM = 0x0E00, /**< Regulatory Domain Module Number */ + MEASUREMENT_MODULE_PARAM = 0x0F00, /**< Measurement Module Number */ + XCC_MANAGER_MODULE_PARAM = 0x1000, /**< XCC Manager Module Number */ + ROAMING_MANAGER_MODULE_PARAM = 0x1100, /**< Roaming Manager Module Number */ + SOFT_GEMINI_PARAM = 0x1200, /**< Soft Gemini Module Number */ + QOS_MANAGER_PARAM = 0x1300, /**< Quality Of Service (QoS) Manager Module Number */ + POWER_MANAGER_PARAM = 0x1400, /**< Power Manager Module Number */ + SCAN_CNCN_PARAM = 0x1500, /**< Scan Concentrator Module Number */ + SCAN_MNGR_PARAM = 0x1600, /**< Scan Manager Module Number */ + MISC_MODULE_PARAM = 0x1700, /**< Misc. Module Number */ + HEALTH_MONITOR_MODULE_PARAM = 0x1800, /**< Health Monitor Module Number */ + + /* + Last module - DO NOT TOUCH! + */ + MODULE_PARAM_LAST_MODULE /**< LAst Module - Dummy, mast be last */ + +} EModuleParam; + +/** \def MAX_PARAM_MODULE_NUMBER + * \brief Macro which returns the number of Parameters Modules + */ +#define MAX_PARAM_MODULE_NUMBER (GET_PARAM_MODULE_NUMBER(MODULE_PARAM_LAST_MODULE)) + + + +/** \enum EExternalParam + * \brief External Parameters + * + * \par Description + * This Enumeation includes all the eaxternal parameters numbers which are used for Get/Set Commands. + * Each module can have 256 parameters \n + * PARAMETERS ISSUE: \n + * Each parameter in the system is defined as UINT32. The parameter structue is as following: \n + * bit 0 - 7: Parameter Number - number of parameter inside Module\n + * bit 8 - 15: Module number - number of Module\n + * bit 16: Async Bit - indicates if command is Async (ON) or Sync (OFF)\n + * bit 17: Allocate Bit - indicates if allocation should be done for parameter (ON) or not (OFF)\n + * bit 18 - 22: Reserved \n + * bit 23: Get Bit - indicates if command is Get (ON) or not (OFF) \n + * bit 24 - 26: Reserved \n + * bit 27: Set Bit - indicates if command is Set (ON) or not (OFF) \n + * bit 28 - 31: Reserved \n\n + * The 'set' bit indicates whteher this parameter can be set from OS abstraction layer. + * The 'get' bit indicates whteher this parameter can be get from OS abstraction layer. + * (All the parameters can be Get/Set from insied the driver.) + * The module number indicated who is the oner of the parameter. + * The parameter number is the parameter unique number used to identify it. + * + * \sa + */ + /* bit | 31 - 28 | 27 | 26 - 24 | 23 | 22 - 18 | 17 | 16 | 15 - 8 | 7 - 0 | + * +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+ + * | Reserved | Set | Reserved | Get | Reserved | Allocate | Async | Module | Parameter | + * | | bit | | bit | | bit | bit | number | number | + * +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+ + */ +typedef enum +{ + /* Driver General section */ + DRIVER_INIT_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x00, /**< Driver Init Parameter (Driver General Set Command): \n + * Used for setting driver defaults. Done Sync with no memory allocation\n + * Parameter Number: 0x00\n + * Module Number: Driver Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + DRIVER_START_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x01, /**< Driver Start Parameter (Driver General Set Command): \n + * Used for Starting Driver. Done Sync with no memory allocation\n + * Parameter Number: 0x01\n + * Module Number: Driver Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + DRIVER_STOP_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x02, /**< Driver Stop Parameter (Driver General Set Command): \n + * Used for Stopping Driver. Done Sync with no memory allocation \n + * Parameter Number: 0x02\n + * Module Number: Driver Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + DRIVER_STATUS_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x03, /**< Driver Status Parameter (Driver General Get Command): \n + * Used for Getting Driver's Status (if running). Done Sync with no memory allocation\n Done Sync with no memory allocation\n + * Parameter Number: 0x03\n + * Module Number: Driver Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + DRIVER_THREADID_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x04, /**< Driver Thread ID Parameter (Driver General Get Command): \n + * Used for Getting Driver's Thread ID. Done Sync with no memory allocation\n + * Parameter Number: 0x04\n + * Module Number: Driver Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* Site manager section */ + SITE_MGR_DESIRED_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x01, /**< Site Manager Desired Channel Parameter (Site Manager Module Set/Get Command):\n + * Used for Setting/Getting desired Channel to/from OS abstraction layer\n + * Done Sync with no memory allocation \n + * Parameter Number: 0x01\n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_DESIRED_SUPPORTED_RATE_SET_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x05, /**< Site Manager Desired Supported Rate Set Parameter (Site Manager Module Set/Get Command):\n + * Used for Setting/Getting Desired Supported Rate to/from OS abstraction layer\n + * Done Sync with no memory allocation \n + * Parameter Number: 0x05\n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_DESIRED_PREAMBLE_TYPE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0A, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n + * Used for Setting/Getting Desired Preamble Type to/from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0A\ n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_CURRENT_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0E, /**< Site Manager Current Channel Parameter (Site Manager Module Set/Get Command): \n + * Used for Setting/Getting Current Channel to/from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0E \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_TI_WLAN_COUNTERS_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x14, /**< Site Manager TI WLAN Counters Parameter (Site Manager Module Get Command): \n + * Used for Getting TI WLAN Statistics Counters from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x14 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_EEPROM_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x16, /**< Site Manager EEPROM Version Parameter (Site Manager Module Get Command): \n + * Used for Getting EEPROM Version from FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x16 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_FIRMWARE_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x17, /**< Site Manager FW Version Parameter (Site Manager Module Get Command): \n + * Used for Getting FW Version from FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x17 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_DESIRED_SLOT_TIME_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x1B, /**< Site Manager Desired Slot Time Parameter (Site Manager Module Set/Get Command): \n + * Used for Getting Desired Slot Time from OS abstraction layer and Setting Desired Slot Time to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x1B \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_GET_AP_QOS_CAPABILITIES = GET_BIT | SITE_MGR_MODULE_PARAM | 0x2E, /**< Site Manager Get AP QoS Cpabilities Parameter (Site Manager Module Get Command): \n + * Used for Getting AP QoS Cpabilities from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x2E \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_CURRENT_TX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x32, /**< Site Manager Current TX Rate Parameter (Site Manager Module Get Command): \n + * Used for Getting Current TX Rate from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x32 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_BSSID_FULL_LIST_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x34, /**< Site Manager BSSID Full List Parameter (Site Manager Module Get Command): \n + * Used for Getting BSSID Full List from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x34 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SITE_MGR_BEACON_FILTER_DESIRED_STATE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x35, /**< Site Manager Beacon Filter Desired State Parameter (Site Manager Module Set/Get Command): \n + * Used for Getting Beacon Filter Desired State from OS abstraction layer or Setting Beacon Filter Desired State to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x35 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_NETWORK_TYPE_IN_USE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x36, /**< Site Manager NW Type in Use Parameter (Site Manager Module Get Command): \n + * Used for Getting NW Type in Use from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x36 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* Simple Config module */ + SITE_MGR_SIMPLE_CONFIG_MODE = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x38, /**< Site Manager Simple Configuration Mode Parameter (Simple Configuration Module Set/Get Command): \n + * Used for Setting/Getting WiFi Simple Configuration Mode\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x38 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SITE_MGR_GET_PRIMARY_SITE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x40, /**< Site Manager Get Primary Site Parameter (Simple Configuration Module Get Command): \n + * Used for Getting Primary Site from OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x40 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + SITE_MGR_PRIMARY_SITE_HT_SUPPORT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x41, /**< Site Manager check if the Primary Site support HT: \n + * Used for check if the Primary Site support HT \n + * Done Sync with no memory allocation\n + * Parameter Number: 0x41 \n + * Module Number: Site Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + /* CTRL data section */ + CTRL_DATA_CURRENT_BSS_TYPE_PARAM = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x04, /**< Control Data Primary BSS Type Parameter (Control Data Module Set/Get Command): \n + * Used for Setting/Getting Primary BSS Type to/form Control Data Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + CTRL_DATA_MAC_ADDRESS = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x08, /**< Control Data MAC Address Parameter (Control Data Module Get Command): \n + * Used for Getting MAC Address form FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x08 \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + CTRL_DATA_CLSFR_TYPE = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x0D, /**< Control Data Classifier Type Parameter (Control Data Module Set/Get Command): \n + * Used for Setting/Getting Classifier Type to/form Control Data (TX Data Queue) Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0D \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + CTRL_DATA_CLSFR_CONFIG = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0E, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n + * Used for adding Classifier entry to Control Data (TX Data Queue) Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0E \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + CTRL_DATA_CLSFR_REMOVE_ENTRY = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0F, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n + * Used for removing Classifier entry from Control Data (TX Data Queue) Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0F \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + CTRL_DATA_TRAFFIC_INTENSITY_THRESHOLD = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x15, /**< Control Data Traffic Intensity Threshold Parameter (Control Data Module Set/Get Command): \n + * Used for Setting/Getting Traffic Intensity Threshold to/from Control Data (Traffic Intensity Threshold) Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x15 \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + CTRL_DATA_TOGGLE_TRAFFIC_INTENSITY_EVENTS = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x16, /**< Control Data Toggle Traffic Intensity Events Parameter (Control Data Module Set Command): \n + * Used for Toggle Traffic Intensity Events (turns ON/OFF traffic intensity notification events) \n + * Done Sync with no memory allocation\n + * Parameter Number: 0x16 \n + * Module Number: Control Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* SME SM section */ + SME_DESIRED_SSID_ACT_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x01, /**< SME Set SSID and start connection process (SME Module Set/Get Command): \n + * Used for set SSID and start connection or get current SSID \n + * Parameter Number: 0x01 \n + * Module Number: SME Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + SME_RADIO_ON_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x03, /**< SME State-Machine Radio ON Parameter (SME Module Set/Get Command): \n + * Used for Setting new and generating State-Machine Event, or Getting current Radio ON\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: SME Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SME_CONNECTION_MODE_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x04, /**< SME State-Machine Connection Mode Parameter (SME Module Set/Get Command): \n + * Used for Setting new Connection Mode (and generating disconnect State-Machine event) or Getting current Connection Mode\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: SME Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + SME_WSC_PB_MODE_PARAM = SET_BIT | SME_MODULE_PARAM | 0x07, /**< SME State-Machine SME on the WPS Mode Parameter (SME Module Set Command): \n + * Used for updating the SME on the WPS mode\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x07 \n + * Module Number: SME Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + SME_DESIRED_SSID_PARAM = SET_BIT | SME_MODULE_PARAM | 0x08, /**< SME Set SSID without start connection process (SME Module Set Command): \n + * Used for set SSID without connection \n + * Parameter Number: 0x08 \n + * Module Number: SME Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* Scan Concentrator section */ + SCAN_CNCN_START_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Application Scan Parameter (Scan Concentrator Module Set Command): \n + * Used for start one-shot scan as running application scan client\n + * Done Sync with memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_CNCN_STOP_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x02, /**< Scan Concentrator Stop Application Scan Parameter (Scan Concentrator Module Set Command): \n + * Used for stop one-shot scan as running application scan client\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_CNCN_START_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x03 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Periodic Scan Parameter (Scan Concentrator Module Set Command): \n + * Used for start periodic scan as running application scan client\n + * Done Sync with memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_CNCN_STOP_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x04, /**< Scan Concentrator Stop Periodic Scan Parameter (Scan Concentrator Module Set Command): \n + * Used for stop periodic scan as running application scan client\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_CNCN_BSSID_LIST_SCAN_PARAM = SET_BIT | SCAN_CNCN_PARAM | 0x05, /**< Scan Concentrator BSSID List Scon Parameter (Scan Concentrator Module Set Command): \n + * Used for start one-shot scan as running application scan client\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x05 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_CNCN_BSSID_LIST_SIZE_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x06, /**< Scan Concentrator BSSID List Size Parameter (Scan Concentrator Module Get Command): \n + * Used for retrieving the size to allocate for the application scan result list\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x06 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + SCAN_CNCN_BSSID_LIST_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x07, /**< Scan Concentrator BSSID List Parameter (Scan Concentrator Module Get Command): \n + * Used for retrieving the application scan result table\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x07 \n + * Module Number: Scan Concentrator Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* Scan Manager module */ + SCAN_MNGR_SET_CONFIGURATION = SET_BIT | SCAN_MNGR_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Manager Set Configuration Parameter (Scan Manager Module Set Command): \n + * Used for setting the Scan Policy\n + * Done Sync with memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Scan Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SCAN_MNGR_BSS_LIST_GET = GET_BIT | SCAN_MNGR_PARAM | 0x02 | ALLOC_NEEDED_PARAM, /**< Scan Manager Get BSS List Parameter (Scan Manager Module Get Command): \n + * Used for getting the currently available BSS list\n + * Done Sync with memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Scan Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* regulatory domain section */ + REGULATORY_DOMAIN_MANAGEMENT_CAPABILITY_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x02, /**< Regulatory Domain Management Capability Enabled Parameter (Regulatory Domain Module Get Command): \n + * Used for getting indication if Spectrum Management is enabled\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + REGULATORY_DOMAIN_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x03, /**< Regulatory Domain Enabled Parameter (Regulatory Domain Module Get Command): \n + * Used for getting indication if regulatory domain if 802.11d is in use\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + REGULATORY_DOMAIN_CURRENT_TX_POWER_LEVEL_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x06, /**< Regulatory Domain Current TX Power Level Parameter (Regulatory Domain Module Set/Get Command): \n + * Used for setting/getting current TZ Power Level\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x06 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_CURRENT_TX_POWER_IN_DBM_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x08, /**< Regulatory Domain Current TX Power in DBM Parameter (Regulatory Domain Module Set/Get Command): \n + * Used for setting/getting current TX Power Level in DBM\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x08 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_ENABLE_DISABLE_802_11D = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0C, /**< Regulatory Domain Enable/Disable 802.11d Parameter (Regulatory Domain Module Set Command): \n + * Used for enabling/disabling 802.11d.\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0C \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_ENABLE_DISABLE_802_11H = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0D, /**< Regulatory Domain Enable/Disable 802.11h Parameter (Regulatory Domain Module Set Command): \n + * Used for enabling/disabling 802.11h (If 802_11h is enabled, enable 802_11d as well)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0D \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_COUNTRY_2_4_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0E | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 2-4 Parameter (Regulatory Domain Module Set/Get Command): \n + * Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n + * Done Sync with memory allocation\n + * Parameter Number: 0x0E \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_COUNTRY_5_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0F | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 5 Parameter (Regulatory Domain Module Set/Get Command): \n + * Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n + * Done Sync with memory allocation\n + * Parameter Number: 0x0F \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_DFS_CHANNELS_RANGE = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x10, /**< Regulatory Domain DFS Channels Parameter (Regulatory Domain Module Set/Get Command): \n + * Used for config manager in order to set/get a parameter received from the OS abstraction layer\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x10 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REGULATORY_DOMAIN_TX_POWER_LEVEL_TABLE_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x12, /**< Regulatory Domain TX Power Level Table Parameter (Regulatory Domain Module Get Command): \n + * Used for getting TX Power Level Table from FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x12 \n + * Module Number: Regulatory Domain Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* Power Manager params */ + POWER_MGR_POWER_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x01, /**< Power Manager Power Mode Parameter (Power Manager Module Set/Get Command): \n + * Used for setting/getting the Power Mode to/from Power Manager Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + POWER_MGR_POWER_LEVEL_PS = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x02, /**< Power Manager Power Level Power-Save Parameter (Power Manager Module Set/Get Command): \n + * Used for getting the Power Level Power-Save from Power Manager Module or setting the Power Level Power-Save to Power Manager Module (and to FW if Power-Save is Enabled)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + POWER_MGR_POWER_LEVEL_DEFAULT = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x03, /**< Power Manager Power Level Default Parameter (Power Manager Module Set/Get Command): \n + * Used for getting the Power Level Default from Power Manager Module or setting the Power Level Default to Power Manager Module (and to FW if Power-Save is Enabled)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + POWER_MGR_POWER_LEVEL_DOZE_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x04, /**< Power Manager Power Level Doze Mode (short-doze / long-doze) Parameter (Power Manager Module Set/Get Command): \n + * Used for getting the Power Level Doze Mode from Power Manager Module or setting the Power Level Doze Mode to Power Manager Module (and to FW if Power-Save is Enabled)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + POWER_MGR_KEEP_ALIVE_ENA_DIS = SET_BIT | POWER_MANAGER_PARAM | 0x05, /**< Power Manager Keep Alive Enable/Disable Parameter (Power Manager Module Set Command): \n + * Used for setting the Keep Alive Enable/Disable to Power Manager and FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x05 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + POWER_MGR_KEEP_ALIVE_ADD_REM = SET_BIT | POWER_MANAGER_PARAM | 0x06 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive add REM Parameter (Power Manager Module Set Command): \n + * Used for setting addition/removal of a template and global enable/disable flag to Power Manager and FW\n + * Done Sync with memory allocation\n + * Parameter Number: 0x06 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + POWER_MGR_KEEP_ALIVE_GET_CONFIG = GET_BIT | POWER_MANAGER_PARAM | 0x07 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive Get Configuration Parameter (Power Manager Module Get Command): \n + * Used for getting the Keep Alive current Configuration\n + * Done Sync with memory allocation\n + * Parameter Number: 0x07 \n + * Module Number: Power Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + + POWER_MGR_GET_POWER_CONSUMPTION_STATISTICS = GET_BIT | POWER_MANAGER_PARAM | 0x08| ASYNC_PARAM, /**< Power Manager Get power consumption parmeter (Power Manager Module Get Command): \n + * Used for getting the Keep Alive current Configuration\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x08 \n + * Module Number: Power Manager Module Number \n + * Async Bit: ON \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + + + + /* Robust Security NW (RSN) section */ + RSN_ENCRYPTION_STATUS_PARAM = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x04, /**< Robust Security NW (RSN) Encryption Status Parameter (RSN Module Set/Get Command): \n + * Used for setting/getting Encryption Status to/from RSN Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + RSN_ADD_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x05, /**< Robust Security NW (RSN) Add Key Parameter (RSN Module Set Command): \n + * Used for adding RSN Key to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x05 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + RSN_REMOVE_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x06, /**< Robust Security NW (RSN) Remove Key Parameter (RSN Module Set Command): \n + * Used for removing RSN Key from FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x06 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + RSN_EXT_AUTHENTICATION_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x07, /**< Robust Security NW (RSN) External Authentication Mode Parameter (RSN Module Set/Get Command): \n + * Used for getting RSN External Authentication Mode from RSN Module or setting RSN External Authentication Mode to FW and RSN Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x07 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + RSN_MIXED_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x08, /**< Robust Security NW (RSN) Mixed Mode Parameter (RSN Module Set/Get Command): \n + * Used for setting/getting RSN Mixed Mode to/from RSN Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x08 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + RSN_DEFAULT_KEY_ID = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x09, /**< Robust Security NW (RSN) Defualt Key ID Parameter (RSN Module Set/Get Command): \n + * Used for getting RSN defualt Key ID from RSN Module or setting RSN defualt Key ID to FW and RSN Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x09 \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + RSN_XCC_NETWORK_EAP = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x0A, /**< Robust Security NW (RSN) XCC NW EAP Parameter (RSN Module Set/Get Command): \n + * Used for setting/getting RSN XCC NW EAP to/from RSN Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x0A \n + * Module Number: RSN Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + /* TWD Control section */ + TWD_RTS_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RTS_THRESHOLD_PARAM_ID, /**< TWD Control RTS Threshold Parameter (TWD Control Module Set/Get Command): \n + * Used for getting RTS Threshold from TWD Control Module or setting RTS Threshold to FW and TWD Control Module\n + * Done Sync with no memory allocation\n + * Parameter Number: TWD_RTS_THRESHOLD_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + TWD_FRAG_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_FRAG_THRESHOLD_PARAM_ID, /**< TWD Control Fragmentation Threshold Parameter (TWD Control Module Set/Get Command): \n + * Used for getting Fragmentation Threshold from TWD Control Module or setting Fragmentation Threshold to FW and TWD Control Module\n + * Done Sync with no memory allocation\n + * Parameter Number: TWD_FRAG_THRESHOLD_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + TWD_RSSI_LEVEL_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_RSSI_LEVEL_PARAM_ID | ASYNC_PARAM, /**< TWD Control RSSI Level Parameter (TWD Control Module Get Command): \n + * Used for getting RSSI Level From FW\n + * Done Async with no memory allocation\n + * Parameter Number: TWD_RSSI_LEVEL_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: ON \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + TWD_SNR_RATIO_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_SNR_RATIO_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Get Command): \n + * Used for getting SNR Radio From FW (same outcome as TWD_RSSI_LEVEL_PARAM)\n + * Done Async with no memory allocation\n + * Parameter Number: TWD_SNR_RATIO_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: ON \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /*for BIP/PLT/Radio Debug Tests --> supports Set + GET*/ + TWD_RADIO_TEST_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RADIO_TEST_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Set/Get Command): \n + * Used for performing BIP/PLT/Radio Debug Tests\n + * Done Async with no memory allocation\n + * Parameter Number: TWD_RADIO_TEST_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: ON \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + /* Roaming manager */ + ROAMING_MNGR_APPLICATION_CONFIGURATION = SET_BIT | GET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x01, /**< Roaming Manager Application Configuration Parameter (Roaming Manager Module Set/Get Command): \n + * Used for setting/getting Roaming Manager Application Configuration to/from Roaming Manager Module and State-Machine\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Roaming Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + ROAMING_MNGR_USER_DEFINED_TRIGGER = SET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x02, /**< Roaming Manager User Defined Trigger Parameter (Roaming Manager Module Set Command): \n + * Used for setting user-defined trigger to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Roaming Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* QOS manager params */ + QOS_MNGR_SET_OS_PARAMS = SET_BIT | QOS_MANAGER_PARAM | 0x10, /**< QoS Manager Set OS Parameter (QoS Module Set Command): \n + * Used for setting Quality Of Service Manager's Parameters\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x10 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + QOS_MNGR_AP_QOS_PARAMETERS = GET_BIT | QOS_MANAGER_PARAM | 0x11, /**< QoS Manager AP QoS Parameter (QoS Module Get Command): \n + * Used for getting current AP QoS Parameters from QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x11 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + QOS_MNGR_OS_TSPEC_PARAMS = GET_BIT | QOS_MANAGER_PARAM | 0x12, /**< QoS Manager OS TSPEC Parameter (QoS Module Get Command): \n + * Used for getting current OS 802.11 QoS TSPEC Parameters from QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x12 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + QOS_MNGR_AC_STATUS = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x13, /**< QoS Manager AC Status Parameter (QoS Module Set/Get Command): \n + * Used for setting/getting SC Status\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x13 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + QOS_MNGR_ADD_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x14, /**< QoS Manager Add TSPEC Request Parameter (QoS Module Set Command): \n + * Used for setting TSPEC Parameters to QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x14 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + QOS_MNGR_DEL_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x15, /**< QoS Manager Delete TSPEC Request Parameter (QoS Module Set Command): \n + * Used for deleting TSPEC Parameters from QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x15 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + QOS_MNGR_GET_DESIRED_PS_MODE = GET_BIT | QOS_MANAGER_PARAM | 0x17, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Get Command): \n + * Used for getting the current desired Power-Save Mode from QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x17 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + QOS_SET_RX_TIME_OUT = SET_BIT | QOS_MANAGER_PARAM | 0x18, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Set Command): \n + * Used for setting RX Time Out (PS poll and UPSD) to FW and in QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x18 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + QOS_MNGR_PS_RX_STREAMING = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x19, /**< QoS Manager Set Power-Save RX Streaming Parameter (QoS Module Set/Get Command): \n + * Used for getting Power-Save RX Streaming or setting Power-Save RX Streaming to FW and in QoS Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x19 \n + * Module Number: QoS Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + /* Soft Gemini params */ + SOFT_GEMINI_SET_ENABLE = SET_BIT | SOFT_GEMINI_PARAM | 0x01, /**< Soft Gimini Parameters Set Enable Parameter (Soft Gimini Parameters Module Set Command): \n + * Used for configuring Soft Gimini enable Mode (Enable|Disable|Auto) in FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Soft Gimini Parameters Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SOFT_GEMINI_SET_CONFIG = SET_BIT | SOFT_GEMINI_PARAM | 0x03, /**< Soft Gimini Parameters Set Configuration Parameter (Soft Gimini Parameters Module Set Command): \n + * Used for setting Soft Gimini Configuration to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: Soft Gimini Parameters Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + SOFT_GEMINI_GET_CONFIG = GET_BIT | SOFT_GEMINI_PARAM | 0x04, /**< Soft Gimini Parameters Get Configuration Parameter (Soft Gimini Parameters Module Get Command): \n + * Used for getting Soft Gimini Configuration\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Soft Gimini Parameters Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + /* REPORT section */ + REPORT_MODULE_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x01, /**< Report Module Table Parameter (Report Module Set/Get Command): \n + * Used for setting/getting Report Module Table (Tble of all Logged Modules)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REPORT_SEVERITY_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x02, /**< Report Severity Table Parameter (Report Module Set/Get Command): \n + * Used for setting/getting the Severity Table (holds availble severity Levels of the event which is reported to user)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REPORT_MODULE_ON_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x03, /**< Report Module ON Parameter (Report Module Set/Get Command): \n + * Used for setting (Enable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REPORT_MODULE_OFF_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x04, /**< Report Module OFF Parameter (Report Module Set/Get Command): \n + * Used for setting (Disable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REPORT_PPMODE_VALUE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x05, /**< Report PP MODE Value Parameter (Report Module Set/Get Command): \n + * Used for setting (Enable/Disable) or Getting the Debug Mode flag, which indicates whether debug module should be used or not\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x05 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + REPORT_OUTPUT_TO_LOGGER_ON = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x06, /**< Report output ON Parameter (Report Module Set/Get Command): \n + * Used for setting the output of logs to the logger application\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + REPORT_OUTPUT_TO_LOGGER_OFF = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x07,/**< Report output OFF Parameter (Report Module Set/Get Command): \n + * Used for setting OFF the output of logs to the logger application\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: Report Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + + /* TX data section */ + TX_CTRL_COUNTERS_PARAM = GET_BIT | TX_CTRL_MODULE_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< TX Control Counters Parameter (TX Control Module Get Command): \n + * Used for getting TX statistics per Tx-queue\n + * Done Sync with memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: TX Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: ON \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + TX_CTRL_RESET_COUNTERS_PARAM = SET_BIT | TX_CTRL_MODULE_PARAM | 0x02, /**< TX Control Reset Counters Parameter (TX Control Module Set Command): \n + * Used for Reset all TX statistics per Tx-queue\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: TX Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + TX_CTRL_SET_MEDIUM_USAGE_THRESHOLD = SET_BIT | TX_CTRL_MODULE_PARAM | 0x03, /**< TX Control Set Medum Usage Threshold Parameter (TX Control Module Set Command): \n + * Used for setting Medum Usage Threshold of AC\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: TX Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* RX data section */ + RX_DATA_ENABLE_DISABLE_RX_DATA_FILTERS = SET_BIT | GET_BIT | RX_DATA_MODULE_PARAM | 0x04, /**< RX Data Enable/Disable Filters Parameter (RX Data Module Set/Get Command): \n + * Used for Enabling/Disabling Filters in FW or getting the Filters Enabling/Disabling current Status\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x04 \n + * Module Number: RX Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + RX_DATA_ADD_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x05, /**< RX Data Add Filter Parameter (RX Data Module Set Command): \n + * Used for adding RX Data Filter to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x05 \n + * Module Number: RX Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + RX_DATA_REMOVE_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x06, /**< RX Data Remove Filter Parameter (RX Data Module Set Command): \n + * Used for removing RX Data Filter from FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x06 \n + * Module Number: RX Data Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + RX_DATA_GET_RX_DATA_FILTERS_STATISTICS = GET_BIT | RX_DATA_MODULE_PARAM | 0x07 | ASYNC_PARAM, /**< RX Data Get RX Data Filter Statistics Parameter (RX Data Module Get Command): \n + * Used for getting RX Data Filter Statistics from FW\n + * Done Async with no memory allocation\n + * Parameter Number: 0x07 \n + * Module Number: RX Data Module Number \n + * Async Bit: ON \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: OFF \n + */ + + + /* measurement section */ + MEASUREMENT_ENABLE_DISABLE_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x01, /**< Measurement Enable/Disable Parameter (Measurement Module Set Command): \n + * Used for Enabling/Disabling Measurement Management Module\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Measurement Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + MEASUREMENT_MAX_DURATION_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x02, /**< Measurement Maximum Duration Parameter (Measurement Module Set Command): \n + * Used for updating the Maximum Duration on non serving channel\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x02 \n + * Module Number: Measurement Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* XCC */ + XCC_CONFIGURATION = SET_BIT | GET_BIT | XCC_MANAGER_MODULE_PARAM | 0x01, /**< XCC Manager Configuration Parameter (XCC Manager Module Set/Get Command): \n + * Used for setting or getting XCC configuration (RogueAP, CCKM, CKIP, All)\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: XCC Manager Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: ON \n + * SET Bit: ON \n + */ + + /* MISC section */ + DEBUG_ACTIVATE_FUNCTION = SET_BIT | MISC_MODULE_PARAM | 0x03, /**< Debug Activate Function Parameter (MISC Module Set Command): \n + * Used for performing debug function\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x03 \n + * Module Number: MISC Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* Health Monitoring section */ + HEALTH_MONITOR_CHECK_DEVICE = SET_BIT | HEALTH_MONITOR_MODULE_PARAM | 0x01, /**< Health Monitoring Check Device Parameter (Health Monitoring Module Set Command): \n + * Used for sending health check command to FW\n + * Done Sync with no memory allocation\n + * Parameter Number: 0x01 \n + * Module Number: Health Monitoring Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + /* TWD CoexActivity table */ + TWD_COEX_ACTIVITY_PARAM = SET_BIT | TWD_MODULE_PARAM | TWD_COEX_ACTIVITY_PARAM_ID, /**< TWD Control CoexActivity Parameter (TWD Control Module Set/Get Command): \n + * Used for getting RTS Threshold from TWD Control Module or setting RTS Threshold to FW and TWD Control Module\n + * Done Sync with no memory allocation\n + * Parameter Number: TWD_COEX_ACTIVITY_PARAM_ID \n + * Module Number: TWD Control Module Number \n + * Async Bit: OFF \n + * Allocate Bit: OFF \n + * GET Bit: OFF \n + * SET Bit: ON \n + */ + + LAST_CMD = 0x00 /**< Last External Parameter - Dummy, Should always stay Last */ + +} EExternalParam; + +/* functions */ +/*************/ + +#endif /* _CMD_INTERFACE_CODES_H_ */ + |