diff options
author | Keerthy <j-keerthy@ti.com> | 2016-08-27 16:09:44 +0530 |
---|---|---|
committer | Lokesh Vutla <lokeshvutla@ti.com> | 2016-08-30 16:12:47 +0530 |
commit | 7d913f1269d7a489a4d0d6a8977fc0d05c6c0d02 (patch) | |
tree | eca56e5f60806cac2f5cc02e44a6a6475ade9894 /arch/arm/cpu/armv7/omap5/hw_data.c | |
parent | ea04822b6c0af737a99f4c8da8301c100199896a (diff) | |
download | jacinto6evm-7d913f1269d7a489a4d0d6a8977fc0d05c6c0d02.tar.gz |
board: DRA71x-evm: Add PMIC support
Add the pmic_data for LP873x PMIC which is used to power
up DRA71x-evm.
Note: As per the DM[1] DRA71x supports only OP_NOM. So, updating
the efuse registers only to use OPP_NOM irrespective of any
CONFIG_DRA7_<VOLT>_OPP_{NOM,od,high} is defined.
[1] http://www.ti.com/product/DRA718/technicaldocuments
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'arch/arm/cpu/armv7/omap5/hw_data.c')
-rw-r--r-- | arch/arm/cpu/armv7/omap5/hw_data.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 6225f16829..5bcb0a9182 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -336,6 +336,22 @@ struct pmic_data tps659038 = { .gpio_en = 0, }; +/* The LP8732 and LP8733 are software-compatible, use common struct */ +struct pmic_data lp8733 = { + .base_offset = LP873X_BUCK_BASE_VOLT_UV, + .step = 5000, /* 5 mV represented in uV */ + /* + * Offset codes 0 - 0x13 Invalid. + * Offset codes 0x14 0x17 give 10mV steps + * Offset codes 0x17 through 0x9D give 5mV steps + * So let us start with our operating range from .73V + */ + .start_code = 0x17, + .i2c_slave_addr = 0x60, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, +}; + struct vcores_data omap5430_volts = { .mpu.value[OPP_NOM] = VDD_MPU, .mpu.addr = SMPS_REG_ADDR_12_MPU, |