MinnowBoard configuration files

Initial configuration files imported from edison and updated for minnowboard.

Change-Id: I0a53518559b59e044c52a8327f11a1f254b4f1d4
Signed-off-by: Viorel Suman <viorel.suman@intel.com>
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
Signed-off-by: Mihai Serban <mihai.serban@intel.com>
Signed-off-by: Stefan Stanacar <stefan.stanacar@intel.com>

17 files changed, 605 insertions, 0 deletions

diff --git a/AndroidBoard.mk b/AndroidBoard.mk
new file mode 100644
index 0000000..a28ba2c
--- /dev/null
+++ b/AndroidBoard.mk
@@ -0,0 +1,22 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This has to live here for now as the variables it requires are
+# not read when BoardConfig.mk is parsed.
+
+include device/generic/brillo/kernel.mk
+
+include device/intel/minnowboard/bootloader.mk
diff --git a/BoardConfig.mk b/BoardConfig.mk
new file mode 100644
index 0000000..eb301ba
--- /dev/null
+++ b/BoardConfig.mk
@@ -0,0 +1,87 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Select the SoC
+$(call set_soc, intel, baytrail)
+
+# Add wifi controller
+$(call add_peripheral, intel, wifi/rtl8192cu)
+# Add lights HAL
+$(call add_peripheral, intel, light/mraa)
+# Add audio support
+$(call add_peripheral, intel, audio/generic/usb)
+# Add sensor support
+$(call add_peripheral, intel, sensors/mraa)
+
+# NOTE: These values must be kept in sync with BOARD_GPT_INI
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 268435456
+BOARD_BOOTLOADER_PARTITION_SIZE := 62914560
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 134217728
+TARGET_USERIMAGES_USE_EXT4 := true
+BOARD_FLASH_BLOCK_SIZE := 512
+TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false
+
+# Specific sensors to be built into the sensors HAL
+PLATFORM_SENSOR_LIST += MPU9150Accelerometer
+
+TARGET_BOOTLOADER_BOARD_NAME := $(TARGET_DEVICE)
+
+#
+# USERFASTBOOT Configuration
+#
+TARGET_STAGE_USERFASTBOOT := true
+TARGET_USE_USERFASTBOOT := true
+USERFASTBOOT_NO_GUI := true
+
+#
+# KERNELFLINGER Configuration
+#
+TARGET_UEFI_ARCH := x86_64
+# Kernelflinger won't check the ACPI table oem_id, oem_table_id and
+# revision fields
+KERNELFLINGER_ALLOW_UNSUPPORTED_ACPI_TABLE := true
+# Allow Kernelflinger to start watchdog prior to boot the kernel
+KERNELFLINGER_USE_WATCHDOG := true
+# Tell Kernelflinger to use pre-generated graphics resources
+KERNELFLINGER_GEN_GRAPHICS := false
+# Specify system verity partition
+PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/by-name/system
+
+BOOTLOADER_USE_PREBUILT := $(shell echo $${BOOTLOADER_USE_PREBUILT:-true})
+BOOTLOADER_ADDITIONAL_DEPS += $(PRODUCT_OUT)/fastboot.img
+BOOTLOADER_ADDITIONAL_ARGS += --fastboot $(PRODUCT_OUT)/fastboot.img
+
+# Note: We use := here to force the policy directory to be added
+# on the first pass for make and to thus get around a build system bug.
+BOARD_SEPOLICY_DIRS := $(BOARD_SEPOLICY_DIRS) device/intel/minnowboard/sepolicy
+
+vendor_partition_directory := vendor/bsp/intel/minnowboard
+
+PRODUCT_COPY_FILES += \
+    device/intel/minnowboard/flash_tools/brillo-flashall.sh:provision-device \
+    device/intel/minnowboard/fstab:root/fstab.$(TARGET_DEVICE) \
+    $(vendor_partition_directory)/boot_binaries/gpt.ini:gpt.ini \
+    $(vendor_partition_directory)/boot_binaries/oemvars.txt:oemvars.txt
+
+BRILLO_VENDOR_PARTITIONS := \
+    $(vendor_partition_directory)/boot_binaries:bootloader \
+    $(vendor_partition_directory)/boot_binaries:fastboot-usb.img \
+    $(vendor_partition_directory)/boot_binaries:oemvars.txt \
+    $(vendor_partition_directory)/boot_binaries:gpt.ini \
+    $(vendor_partition_directory)/boot_binaries:README
+
+# Must defined at the end of the file
+$(call add_device_packages)
diff --git a/base_product/AndroidProducts.mk b/base_product/AndroidProducts.mk
new file mode 100644
index 0000000..1253391
--- /dev/null
+++ b/base_product/AndroidProducts.mk
@@ -0,0 +1,21 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This file is found by the build system.
+# It defines the base product definition for device bring up.
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/minnowboard.mk
diff --git a/base_product/devicesetup.sh b/base_product/devicesetup.sh
new file mode 100644
index 0000000..f92c8fa
--- /dev/null
+++ b/base_product/devicesetup.sh
@@ -0,0 +1,17 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+add_lunch_combo minnowboard-eng
diff --git a/base_product/minnowboard.mk b/base_product/minnowboard.mk
new file mode 100644
index 0000000..a5b9283
--- /dev/null
+++ b/base_product/minnowboard.mk
@@ -0,0 +1,26 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+$(call inherit-product, device/generic/brillo/brillo_base.mk)
+
+PRODUCT_NAME := minnowboard
+PRODUCT_BRAND := Brillo
+
+PRODUCT_DEVICE := minnowboard
+
+# Install minnowboard-specific config file for weaved.
+PRODUCT_COPY_FILES += \
+  device/intel/minnowboard/base_product/weaved.conf:system/etc/weaved/weaved.conf
diff --git a/base_product/weaved.conf b/base_product/weaved.conf
new file mode 100644
index 0000000..4cdae0d
--- /dev/null
+++ b/base_product/weaved.conf
@@ -0,0 +1,79 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# OAuth 2.0 client id.
+# client_id=
+
+# OAuth 2.0 client secret.
+# client_secret=
+
+# OAuth 2.0 API key.
+# api_key=
+
+# Human readable name of the device.
+name=MinnowBoard Starter Board
+
+# Human readable description of the device.
+# Defaults to empty string"
+description=Intel MinnowBoard
+
+# Location of the device.
+# location=
+
+# Manufacturer of the device.
+oem_name=Intel
+
+# Model of the device.
+# Defaults to Brillo.
+model_name=MinnowBoard
+
+# Five character code assigned by the cloud registry of device models.
+# Defaults to "AAAAA" (Unregistered model).
+model_id=AAAAA
+
+# Maximum role for local anonymous user.
+# local_anonymous_access_role=viewer
+
+# If true, allows local pairing using Privet API.
+# local_pairing_enabled=true
+
+# If true, allows local discovery using mDns.
+# local_discovery_enabled=true
+
+# GCD service polling interval in milliseconds.
+# polling_period_ms=7000
+
+# GCD service backup polling interval in milliseconds.
+# backup_polling_period_ms=1800000
+
+# Automatic mode causes buffet to automatically bring up a SoftAP for
+# bootstrapping when it looses network connectivity for long enough,
+# and on first boot.
+# wifi_auto_setup_enabled=true
+
+# List of pairing modes supported by device.
+# Values can be one of pinCode, embeddedCode, ultrasound32, audible32.
+# Defaults to pinCode if embedded_code_path is empty, or embeddedCode otherwise.
+pairing_modes=embeddedCode
+
+# Absolute path to file specifying an embedded pairing code. The file at
+# embedded_code_path should be a file in key value format, with a key
+# embedded_code.
+# Defaults to empty path.
+embedded_code_path=/etc/weaved/weaved.conf
+
+# Embedded code.
+embedded_code=hello
diff --git a/bootloader.mk b/bootloader.mk
new file mode 100644
index 0000000..3ad8d28
--- /dev/null
+++ b/bootloader.mk
@@ -0,0 +1,116 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ifeq ($(BOOTLOADER_USE_PREBUILT),false)
+# Rules to create bootloader zip file, a precursor to the bootloader
+# image that is stored in the target-files-package. There's also
+# metadata file which indicates how large to make the VFAT filesystem
+# image
+
+ifeq ($(TARGET_UEFI_ARCH),i386)
+efi_default_name := bootia32.efi
+LOADER_TYPE := linux-x86
+else
+efi_default_name := bootx64.efi
+LOADER_TYPE := linux-x86_64
+endif
+
+# (pulled from build/core/Makefile as this gets defined much later)
+# Pick a reasonable string to use to identify files.
+ifneq "" "$(filter eng.%,$(BUILD_NUMBER))"
+# BUILD_NUMBER has a timestamp in it, which means that
+# it will change every time.  Pick a stable value.
+FILE_NAME_TAG := eng.$(USER)
+else
+FILE_NAME_TAG := $(BUILD_NUMBER)
+endif
+
+kernelflinger := $(PRODUCT_OUT)/efi/kernelflinger.efi
+
+BOARD_FIRST_STAGE_LOADER := $(kernelflinger)
+USERFASTBOOT_2NDBOOTLOADER :=
+
+intermediates := $(call intermediates-dir-for,PACKAGING,bootloader_zip)
+bootloader_zip := $(intermediates)/bootloader.zip
+$(bootloader_zip): intermediates := $(intermediates)
+$(bootloader_zip): efi_root := $(intermediates)/root
+$(bootloader_zip): \
+		$(TARGET_DEVICE_DIR)/AndroidBoard.mk \
+		$(BOARD_FIRST_STAGE_LOADER) \
+		| $(ACP)
+
+	$(hide) rm -rf $(efi_root)
+	$(hide) rm -f $@
+	$(hide) mkdir -p $(efi_root)/EFI/BOOT
+	$(hide) $(ACP) $(BOARD_FIRST_STAGE_LOADER) $(efi_root)/loader.efi
+	$(hide) $(ACP) $(BOARD_FIRST_STAGE_LOADER) $(efi_root)/EFI/BOOT/$(efi_default_name)
+	$(hide) echo "Brillo=\\EFI\\BOOT\\$(efi_default_name)" > $(efi_root)/manifest.txt
+	$(hide) (cd $(efi_root) && zip -qry ../$(notdir $@) .)
+
+bootloader_metadata := $(intermediates)/bootloader-size.txt
+$(bootloader_metadata):
+	$(hide) mkdir -p $(dir $@)
+	$(hide) echo $(BOARD_BOOTLOADER_PARTITION_SIZE) > $@
+
+INSTALLED_RADIOIMAGE_TARGET += $(bootloader_zip) $(bootloader_metadata)
+
+# Rule to create $(OUT)/bootloader image, binaries within are signed with
+# testing keys
+
+BOOTLOADER_FROM_ZIP := vendor/bsp/intel/kernelflinger/build/bootloader_from_zip
+
+bootloader_bin := $(PRODUCT_OUT)/bootloader
+$(bootloader_bin): \
+		$(bootloader_zip) \
+		$(IMG2SIMG) \
+		$(BOOTLOADER_ADDITIONAL_DEPS) \
+		$(BOOTLOADER_FROM_ZIP)
+
+	$(hide) $(BOOTLOADER_FROM_ZIP) \
+		--size $(BOARD_BOOTLOADER_PARTITION_SIZE) \
+		$(BOOTLOADER_ADDITIONAL_ARGS) \
+		--zipfile $(bootloader_zip) \
+		$@
+
+droidcore: $(bootloader_bin)
+
+.PHONY: bootloader
+bootloader: $(bootloader_bin)
+$(call dist-for-goals,droidcore,$(bootloader_bin):$(TARGET_PRODUCT)-bootloader-$(FILE_NAME_TAG))
+
+fastboot_usb_bin := $(PRODUCT_OUT)/fastboot-usb.img
+$(fastboot_usb_bin): \
+		$(bootloader_zip) \
+		$(BOOTLOADER_ADDITIONAL_DEPS) \
+		$(BOOTLOADER_FROM_ZIP)
+
+	$(hide) $(BOOTLOADER_FROM_ZIP) \
+		$(BOOTLOADER_ADDITIONAL_ARGS) \
+		--zipfile $(bootloader_zip) \
+		--extra-size 10485760 \
+		--bootable \
+		$@
+
+# Build when 'make' is run with no args
+droidcore: $(fastboot_usb_bin)
+
+.PHONY: userfastboot-usb
+userfastboot-usb: $(fastboot_usb_bin)
+
+$(call dist-for-goals,droidcore,$(fastboot_usb_bin):$(TARGET_PRODUCT)-fastboot-usb-$(FILE_NAME_TAG).img)
+
+# for userfastboot, we need the userfastboot image in the bootloader partition.
+INSTALLED_RADIOIMAGE_TARGET += $(PRODUCT_OUT)/fastboot.img
+endif
diff --git a/build/tasks/flashfiles.mk b/build/tasks/flashfiles.mk
new file mode 100644
index 0000000..617cb5d
--- /dev/null
+++ b/build/tasks/flashfiles.mk
@@ -0,0 +1,56 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Rule to make a distribution zipfile with all that is needed to flash the MinnowBoard
+
+ifeq ($(TARGET_DEVICE),minnowboard)
+
+minnowboardname := $(TARGET_PRODUCT)
+ifeq ($(TARGET_BUILD_TYPE),debug)
+  minnowboardname := $(minnowboardname)_debug
+endif
+minnowboardname := $(minnowboardname)-flashfiles-$(FILE_NAME_TAG)
+
+MINNOWBOARD_ZIP    :=  $(TARGET_OUT_INTERMEDIATES)/$(minnowboardname).zip
+MINNOWBOARD_VENDOR := vendor/bsp/intel/minnowboard
+MINNOWBOARD_BINARIES := $(MINNOWBOARD_VENDOR)/boot_binaries
+MINNOWBOARD_DEVICE := device/intel/minnowboard
+MINNOWBOARD_TOOLS  := $(MINNOWBOARD_DEVICE)/flash_tools
+
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/gpt.ini
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/bootloader
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/oemvars.txt
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_TOOLS)/brillo-flashall.sh
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_TOOLS)/README
+MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/boot.img
+MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/system.img
+MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/userdata.img
+
+# Include the usb-stick userfastboot
+MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/fastboot-usb.img
+
+# Include fastboot and adb - so that the latest is available
+MINNOWBOARD_FLASHFILES += $(HOST_OUT)/bin/fastboot
+MINNOWBOARD_FLASHFILES += $(HOST_OUT)/bin/adb
+
+$(MINNOWBOARD_ZIP): $(MINNOWBOARD_FLASHFILES)
+	$(hide) echo "Package flashfiles: $@"
+	$(hide) rm -rf $@
+	$(hide) mkdir -p $(dir $@)
+	$(hide) zip -j $@ $(MINNOWBOARD_FLASHFILES)
+
+$(call dist-for-goals, dist_files, $(MINNOWBOARD_ZIP))
+
+endif
diff --git a/build/tasks/ramdisk.mk b/build/tasks/ramdisk.mk
new file mode 100644
index 0000000..ba3c82d
--- /dev/null
+++ b/build/tasks/ramdisk.mk
@@ -0,0 +1,20 @@
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ifeq ($(BOOTLOADER_USE_PREBUILT),false)
+ifeq ($(TARGET_USE_USERFASTBOOT),true)
+-include $(TOPDIR)vendor/bsp/intel/userfastboot/ramdisk.mk
+endif
+endif
diff --git a/flash_tools/LICENSE.txt b/flash_tools/LICENSE.txt
new file mode 100644
index 0000000..94ab159
--- /dev/null
+++ b/flash_tools/LICENSE.txt
@@ -0,0 +1,13 @@
+Copyright 2016 Intel Corporation
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
diff --git a/flash_tools/README b/flash_tools/README
new file mode 100644
index 0000000..1352d13
--- /dev/null
+++ b/flash_tools/README
@@ -0,0 +1 @@
+## Include flashing instructions here.
diff --git a/flash_tools/brillo-flashall.sh b/flash_tools/brillo-flashall.sh
new file mode 100755
index 0000000..b89b0b4
--- /dev/null
+++ b/flash_tools/brillo-flashall.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+#
+# Copyright 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Only execute this script on a Brillo provisioned MinnowBoard.
+# See your Brillo-MinnowBoard online information for initial provisioning and recovery.
+
+set -e
+
+function dir_with_file() {
+    local file=${1}; shift
+    local dir;
+    for dir; do
+        if [ -z "${dir}" ]; then continue; fi
+        if [ -r "${dir}/${file}" ]; then
+            echo ${dir}
+            return
+        fi
+    done
+    echo "Could not find ${file}, looked in $@" >&2
+    return 1
+}
+
+LOCAL_DIR=$(dirname "${0}")
+BASE_NAME=$(basename "${0}")
+
+IP="${1}"
+if [ "$IP" == "" ]; then
+    echo "Usage: ${BASE_NAME} <MinnowBoard Board IP address>"
+    exit 0
+fi
+
+# Location of where the Brillo OS image is built.
+OS=$(dir_with_file boot.img \
+    "${ANDROID_PROVISION_OS_PARTITIONS}" \
+    "${LOCAL_DIR}" \
+    "${BRILLO_OUT_DIR}" \
+    "${ANDROID_PRODUCT_OUT}")
+
+VENDOR=$(dir_with_file bootloader \
+    "${ANDROID_PROVISION_VENDOR_PARTITIONS}" \
+    "${LOCAL_DIR}" \
+    "${ANDROID_BUILD_TOP}/vendor/bsp/intel/minnowboard/boot_binaries")
+
+
+if [ -x ./fastboot ]; then
+  FASTBOOT=./fastboot
+else
+  FASTBOOT=fastboot
+fi
+
+$FASTBOOT -s tcp:$IP flash gpt        "${VENDOR}"/gpt.ini
+$FASTBOOT -s tcp:$IP flash bootloader "${VENDOR}"/bootloader
+$FASTBOOT -s tcp:$IP flash boot_a     "${OS}"/boot.img
+$FASTBOOT -s tcp:$IP flash boot_b     "${OS}"/boot.img
+$FASTBOOT -s tcp:$IP flash system_a   "${OS}"/system.img
+$FASTBOOT -s tcp:$IP flash system_b   "${OS}"/system.img
+$FASTBOOT -s tcp:$IP flash userdata   "${OS}"/userdata.img
+$FASTBOOT -s tcp:$IP flash oemvars    "${VENDOR}"/oemvars.txt
+$FASTBOOT -s tcp:$IP oem set_active 0
+
+echo "Please run the following command to restart your MinnowBoard"
+echo "		$FASTBOOT -s tcp:$IP reboot"
+echo
diff --git a/fstab b/fstab
new file mode 100644
index 0000000..9dc5221
--- /dev/null
+++ b/fstab
@@ -0,0 +1,5 @@
+/dev/block/by-name/system       /system         ext4    ro                              wait,slotselect
+/dev/block/by-name/userdata     /data           ext4    noatime,nosuid,nodev,discard    wait,formattable,encryptable=footer
+/dev/block/by-name/misc         /misc           emmc    defaults                        defaults
+/dev/block/by-name/boot         /boot           emmc    defaults                        defaults,slotselect
+/dev/block/by-name/bootloader   /bootloader     emmc    defaults                        recoveryonly
diff --git a/sepolicy/file_contexts b/sepolicy/file_contexts
new file mode 100644
index 0000000..9db87e4
--- /dev/null
+++ b/sepolicy/file_contexts
@@ -0,0 +1,7 @@
+/dev/block/(pci|platform)(/.*)?/.*/by-name/boot_a       u:object_r:boot_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/boot_b       u:object_r:boot_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/system_a     u:object_r:system_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/system_b     u:object_r:system_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/misc         u:object_r:misc_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/recovery     u:object_r:recovery_block_device:s0
+/dev/block/(pci|platform)(/.*)?/.*/by-name/userdata     u:object_r:userdata_block_device:s0
diff --git a/sepolicy/sensorservice.te b/sepolicy/sensorservice.te
new file mode 100644
index 0000000..05f2d4e
--- /dev/null
+++ b/sepolicy/sensorservice.te
@@ -0,0 +1,7 @@
+#
+# Sensorservice uses the sensors HAL... which needs sysfs file and i2c device access.
+#
+
+allow sensorservice i2c_device:chr_file rw_file_perms;
+allow sensorservice sysfs:file w_file_perms;
+allow sensorservice sysfs:lnk_file getattr;
diff --git a/sepolicy/te_macros b/sepolicy/te_macros
new file mode 100644
index 0000000..632389c
--- /dev/null
+++ b/sepolicy/te_macros
@@ -0,0 +1,17 @@
+#####################################
+# Userfastboot only
+# SELinux rules which apply only to userfastboot mode
+#
+define(`userfastboot_only', ifelse(target_userfastboot, `true', $1, ))
+
+define(`notuserfastboot', ifelse(target_userfastboot, `true', -userfastboot, ))
+
+
+#####################################
+# target_only(target, rules)
+# SELinux rules which only apply to a particular target
+# target - the target name in TARGET_PRODUCT. Note this is a substring search
+#          so target_only(`coh', `rules') is the same as target_only(`coho', `rules')
+# rules - Any rules you wish to add, make sure to quote them with `'
+#
+define(`target_only', `ifelse(eval(index(board_sepolicy_target_product, $1) >= 0),1,$2)')
diff --git a/sepolicy/userfastboot.te b/sepolicy/userfastboot.te
new file mode 100644
index 0000000..1333172
--- /dev/null
+++ b/sepolicy/userfastboot.te
@@ -0,0 +1,35 @@
+# Rules for bootable/userfastboot which pretty much does
+# everything the neverallow's catch in external/sepolicy
+userfastboot_only(`
+
+  # Keep the type from infiltrating non-userfastboot
+  # builds.
+  type userfastboot, domain;
+  permissive userfastboot;
+
+  # For silence
+  dontaudit userfastboot self:capability_class_set *;
+  dontaudit userfastboot kernel:security *;
+  dontaudit userfastboot kernel:system *;
+  dontaudit userfastboot self:memprotect *;
+  dontaudit userfastboot domain:process *;
+  dontaudit userfastboot domain:fd *;
+  dontaudit userfastboot domain:dir r_dir_perms;
+  dontaudit userfastboot domain:lnk_file r_file_perms;
+  dontaudit userfastboot domain:{ fifo_file file } rw_file_perms;
+  dontaudit userfastboot domain:socket_class_set *;
+  dontaudit userfastboot domain:ipc_class_set *;
+  dontaudit userfastboot domain:key *;
+  dontaudit userfastboot fs_type:filesystem *;
+  dontaudit userfastboot fs_type:dir_file_class_set *;
+  dontaudit userfastboot dev_type:dir_file_class_set *;
+  dontaudit userfastboot file_type:dir_file_class_set *;
+  dontaudit userfastboot node_type:node *;
+  dontaudit userfastboot node_type:{ tcp_socket udp_socket } node_bind;
+  dontaudit userfastboot netif_type:netif *;
+  dontaudit userfastboot port_type:socket_class_set name_bind;
+  dontaudit userfastboot port_type:{ tcp_socket dccp_socket } name_connect;
+  dontaudit userfastboot domain:peer recv;
+  dontaudit userfastboot domain:binder *;
+  dontaudit userfastboot property_type:property_service set;
+')