diff options
Diffstat (limited to 'include/common/aarch32/asm_macros.S')
| -rw-r--r-- | include/common/aarch32/asm_macros.S | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/include/common/aarch32/asm_macros.S b/include/common/aarch32/asm_macros.S new file mode 100644 index 00000000..f5737449 --- /dev/null +++ b/include/common/aarch32/asm_macros.S @@ -0,0 +1,159 @@ +/* + * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef __ASM_MACROS_S__ +#define __ASM_MACROS_S__ + +#include <arch.h> +#include <asm_macros_common.S> +#include <spinlock.h> + +#define WORD_SIZE 4 + + /* + * Co processor register accessors + */ + .macro ldcopr reg, coproc, opc1, CRn, CRm, opc2 + mrc \coproc, \opc1, \reg, \CRn, \CRm, \opc2 + .endm + + .macro ldcopr16 reg1, reg2, coproc, opc1, CRm + mrrc \coproc, \opc1, \reg1, \reg2, \CRm + .endm + + .macro stcopr reg, coproc, opc1, CRn, CRm, opc2 + mcr \coproc, \opc1, \reg, \CRn, \CRm, \opc2 + .endm + + .macro stcopr16 reg1, reg2, coproc, opc1, CRm + mcrr \coproc, \opc1, \reg1, \reg2, \CRm + .endm + + /* Cache line size helpers */ + .macro dcache_line_size reg, tmp + ldcopr \tmp, CTR + ubfx \tmp, \tmp, #CTR_DMINLINE_SHIFT, #CTR_DMINLINE_WIDTH + mov \reg, #WORD_SIZE + lsl \reg, \reg, \tmp + .endm + + .macro icache_line_size reg, tmp + ldcopr \tmp, CTR + and \tmp, \tmp, #CTR_IMINLINE_MASK + mov \reg, #WORD_SIZE + lsl \reg, \reg, \tmp + .endm + + /* + * Declare the exception vector table, enforcing it is aligned on a + * 32 byte boundary. + */ + .macro vector_base label + .section .vectors, "ax" + .align 5 + \label: + .endm + + /* + * This macro calculates the base address of the current CPU's multi + * processor(MP) stack using the plat_my_core_pos() index, the name of + * the stack storage and the size of each stack. + * Out: r0 = physical address of stack base + * Clobber: r14, r1, r2 + */ + .macro get_my_mp_stack _name, _size + bl plat_my_core_pos + ldr r2, =(\_name + \_size) + mov r1, #\_size + mla r0, r0, r1, r2 + .endm + + /* + * This macro calculates the base address of a uniprocessor(UP) stack + * using the name of the stack storage and the size of the stack + * Out: r0 = physical address of stack base + */ + .macro get_up_stack _name, _size + ldr r0, =(\_name + \_size) + .endm + + /* + * Helper macro to generate the best mov/movw/movt combinations + * according to the value to be moved. + */ + .macro mov_imm _reg, _val + .if ((\_val) & 0xffff0000) == 0 + mov \_reg, #(\_val) + .else + movw \_reg, #((\_val) & 0xffff) + movt \_reg, #((\_val) >> 16) + .endif + .endm + + /* + * Macro to mark instances where we're jumping to a function and don't + * expect a return. To provide the function being jumped to with + * additional information, we use 'bl' instruction to jump rather than + * 'b'. + * + * Debuggers infer the location of a call from where LR points to, which + * is usually the instruction after 'bl'. If this macro expansion + * happens to be the last location in a function, that'll cause the LR + * to point a location beyond the function, thereby misleading debugger + * back trace. We therefore insert a 'nop' after the function call for + * debug builds, unless 'skip_nop' parameter is non-zero. + */ + .macro no_ret _func:req, skip_nop=0 + bl \_func +#if DEBUG + .ifeq \skip_nop + nop + .endif +#endif + .endm + + /* + * Reserve space for a spin lock in assembly file. + */ + .macro define_asm_spinlock _name:req + .align SPINLOCK_ASM_ALIGN + \_name: + .space SPINLOCK_ASM_SIZE + .endm + + /* + * Helper macro to OR the bottom 32 bits of `_val` into `_reg_l` + * and the top 32 bits of `_val` into `_reg_h`. If either the bottom + * or top word of `_val` is zero, the corresponding OR operation + * is skipped. + */ + .macro orr64_imm _reg_l, _reg_h, _val + .if (\_val >> 32) + orr \_reg_h, \_reg_h, #(\_val >> 32) + .endif + .if (\_val & 0xffffffff) + orr \_reg_l, \_reg_l, #(\_val & 0xffffffff) + .endif + .endm + + /* + * Helper macro to bitwise-clear bits in `_reg_l` and + * `_reg_h` given a 64 bit immediate `_val`. The set bits + * in the bottom word of `_val` dictate which bits from + * `_reg_l` should be cleared. Similarly, the set bits in + * the top word of `_val` dictate which bits from `_reg_h` + * should be cleared. If either the bottom or top word of + * `_val` is zero, the corresponding BIC operation is skipped. + */ + .macro bic64_imm _reg_l, _reg_h, _val + .if (\_val >> 32) + bic \_reg_h, \_reg_h, #(\_val >> 32) + .endif + .if (\_val & 0xffffffff) + bic \_reg_l, \_reg_l, #(\_val & 0xffffffff) + .endif + .endm + +#endif /* __ASM_MACROS_S__ */ |