path: root/overlay/frameworks/base/core/res/res/values/config.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2014, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->

<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">

    <!-- If this is true, the screen will fade off. -->
    <bool name="config_animateScreenLights">false</bool>

    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
         autodetected from the Configuration. -->
    <bool name="config_showNavigationBar">true</bool>

    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
    <bool name="config_automatic_brightness_available">true</bool>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N  1 zones as follows:

         Zone 0:        0 <= LUX < array[0]
         Zone 1:        array[0] <= LUX < array[1]
         ...
         Zone N:        array[N - 1] <= LUX < array[N]
         Zone N + 1     array[N] <= LUX < infinity

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
        <item>9</item>
        <item>30</item>
        <item>100</item>
        <item>325</item>
        <item>1250</item>
        <item>3500</item>
        <item>10000</item>
        <item>20000</item>
    </integer-array>

    <!-- Array of output values for LCD backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLcdBacklightValues">
        <!--     9 --> <item>18</item>
        <!--    30 --> <item>30</item>
        <!--   100 --> <item>59</item>
        <!--   325 --> <item>74</item>
        <!--  1250 --> <item>92</item>
        <!--  3500 --> <item>118</item>
        <!-- 10000 --> <item>155</item>
        <!-- 20000 --> <item>222</item>
                       <item>255</item>
    </integer-array>

    <!-- Array of output values for button backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessButtonBacklightValues">
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
    </integer-array>

    <!-- Minimum screen brightness allowed by the power manager. -->
    <integer name="config_screenBrightnessDim">17</integer>

    <!-- Screen brightness when dozing. -->
    <integer name="config_screenBrightnessDoze">17</integer>

    <!-- Default screen brightness setting.
         Must be in the range specified by minimum and maximum. -->
    <integer name="config_screenBrightnessSettingDefault">82</integer>

    <!-- Minimum screen brightness setting allowed by the power manager.
         The user is forbidden from setting the brightness below this level. -->
    <integer name="config_screenBrightnessSettingMinimum">17</integer>

    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
    <bool name="config_unplugTurnsOnScreen">true</bool>

    <!-- Boolean indicating if restoring network selection should be skipped -->
    <!-- The restoring is handled by modem if it is true -->
    <bool translatable="false" name="skip_restoring_network_selection">true</bool>

    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
    <bool name="config_cellBroadcastAppLinks">true</bool>

    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
    <integer name="config_shutdownBatteryTemperature">680</integer>

    <!-- Default color for notification LED is white. -->
    <color name="config_defaultNotificationColor">#ffffffff</color>

    <!-- Default LED on time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOn">1000</integer>

    <!-- Default LED off time for notification LED in milliseconds. -->
    <integer name="config_defaultNotificationLedOff">9000</integer>

    <!-- reference volume index for music stream to limit headphone volume and display warning -->
    <integer name="config_safe_media_volume_index">5</integer>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
    <string-array translatable="false" name="config_tether_usb_regexs">
        <item>"rndis\\d"</item>
    </string-array>

    <string-array translatable="false" name="config_oemUsbModeOverride">
        <item>"bp-tools:rndis,adb:rndis,diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item>
        <item>"bp-tools:rndis:rndis,diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item>
        <item>"bp-tools:mtp,adb:diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item>
        <item>"bp-tools:mtp:diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet"</item>
        <item>"bp-tools:adb:diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item>
        <item>"mot-factory:rndis,adb:usbnet,adb"</item>
        <item>"mot-factory:rndis:usbnet"</item>
        <item>"mot-factory:mtp,adb:usbnet,adb"</item>
        <item>"mot-factory:mtp:usbnet"</item>
        <item>"mot-factory:none:usbnet"</item>
        <item>"mot-factory:adb:usbnet,adb"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
        <item>"wlan0"</item>
        <item>"softap.*"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
         should be empty. -->
    <string-array translatable="false" name="config_tether_bluetooth_regexs">
           <item>"bt-pan"</item>
    </string-array>

    <!-- Array of allowable ConnectivityManager network types for tethering -->
    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
         [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
    <integer-array translatable="false" name="config_tether_upstream_types">
        <item>0</item>
        <item>1</item>
        <item>5</item>
        <item>7</item>
    </integer-array>

    <!-- This string array should be overridden by the device to present a list of network
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
         before automatically restore the default connection.  Set -1 if the connection
         does not require auto-restore. -->
    <!-- the 6th element indicates boot-time dependency-met value. -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1,-1,true"</item>
        <item>"mobile,0,0,0,-1,true"</item>
        <item>"mobile_mms,2,0,2,60000,true"</item>
        <item>"mobile_supl,3,0,2,60000,true"</item>
        <item>"mobile_dun,4,0,2,60000,true"</item>
        <item>"mobile_hipri,5,0,3,60000,true"</item>
        <item>"mobile_fota,10,0,2,60000,true"</item>
        <item>"mobile_ims,11,0,2,60000,true"</item>
        <item>"mobile_cbs,12,0,2,60000,true"</item>
        <item>"mobile_ia,14,0,2,-1,true"</item>
        <item>"bluetooth,7,7,2,-1,true"</item>
        <item>"ethernet,9,9,9,-1,true"</item>
        <item>"mobile_emergency,15,0,2,-1,true</item>
    </string-array>

    <!-- This string array should be overridden by the device to present a list of radio
         attributes.  This is used by the connectivity manager to decide which networks can coexist
         based on the hardware -->
    <!-- An Array of "[ConnectivityManager connectionType],
                      [# simultaneous connection types]"  -->
    <string-array translatable="false" name="radioAttributes">
        <item>"1,1"</item>
        <item>"0,1"</item>
        <item>"7,1"</item>
    </string-array>

    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>

    <!-- Boolean indicating whether Hotspot 2.0/Passpoint and ANQP queries is enabled -->
    <bool translatable="false" name="config_wifi_hotspot2_enabled">true</bool>

    <!-- Boolean indicating whether the wifi chipset has background scan support -->
    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>

    <!-- string indicating the OUI that should be used when generating random mac addresses -->
    <string  translatable="false" name="config_wifi_random_mac_oui">92-68-C3</string>

    <!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem
         rather than the uevent framework. -->
    <bool name="config_useDevInputEventForAudioJack">true</bool>

    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
         it causes the device to wake up.
         The default is false. -->
    <bool name="config_lidControlsSleep">true</bool>

    <!-- Indicate whether to allow the device to suspend when the screen is off
         due to the proximity sensor.  This resource should only be set to true
         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
         Otherwise, the device may fail to wake out of suspend reliably.
         The default is false. -->
    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>

    <!-- Vibrator pattern for feedback about a long screen/key press -->
    <integer-array name="config_longPressVibePattern">
        <item>0</item>
        <item>25</item>
        <item>10</item>
    </integer-array>

    <!-- Make things go fast -->
    <bool name="config_ui_enableFadingMarquee">false</bool>

    <!-- Vibrator pattern for feedback about touching a virtual key -->
    <integer-array name="config_virtualKeyVibePattern">
        <item>0</item>
        <item>25</item>
        <item>8</item>
    </integer-array>

    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
    <integer-array name="config_keyboardTapVibePattern">
        <item>25</item>
    </integer-array>

    <!-- Wifi driver supports batched scan -->
    <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool>

    <!-- MMS user agent string -->
    <string name="config_mms_user_agent" translatable="false">nexus6</string>

    <!-- MMS user agent prolfile url -->
    <string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/nexus6/Profile/nexus6.rdf</string>

    <!--  Maximum number of supported users -->
    <integer name="config_multiuserMaximumUsers">4</integer>
    <!--  Whether Multiuser UI should be shown -->
    <bool name="config_enableMultiUserUI">true</bool>

    <!-- Dream of notifications -->
    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
    <bool name="config_dozeAfterScreenOff">true</bool>
    <bool name="config_dozePulsePickup">true</bool>
    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>

    <!-- Is the device capable of hot swapping an UICC Card -->
    <bool name="config_hotswapCapable">true</bool>

    <!-- Flag specifying whether VoLTE is availasble on device -->
    <bool name="config_device_volte_available">true</bool>

    <!-- Flag specifying whether VoLTE is availasble on device -->
    <bool name="config_device_vt_available">false</bool>

    <!-- Flag specifying whether WFC over IMS is availasble on device -->
    <bool name="config_device_wfc_ims_available">true</bool>

    <!-- Flag specifying that this device will NOT use the "allow_hold_in_ims_call" carrier config
         option. -->
    <bool name="config_device_respects_hold_carrier_config">false</bool>

    <!-- Configure mobile tcp buffer sizes in the form:
         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
         If no value is found for the rat-name in use, the system default will be applied.
    -->
    <string-array name="config_mobile_tcp_buffers">
        <item>umts:131072,262144,1452032,4096,16384,399360</item>
        <item>hspa:131072,262144,2441216,4096,16384,399360</item>
        <item>hsupa:131072,262144,2441216,4096,16384,399360</item>
        <item>hsdpa:131072,262144,2441216,4096,16384,399360</item>
        <item>hspap:131072,262144,2441216,4096,16384,399360</item>
        <item>edge:16384,32768,131072,4096,16384,65536</item>
        <item>gprs:4096,8192,24576,4096,8192,24576</item>
        <item>1xrtt:16384,32768,131070,4096,16384,102400</item>
        <item>evdo:131072,262144,1048576,4096,16384,524288</item>
        <item>lte:524288,1048576,8388608,262144,524288,4194304</item>
    </string-array>

    <!-- Configure wifi tcp buffersizes in the form:
         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
    <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,4194304,262144,524288,1048576</string>

    <!-- Config determines whether to update phone object when voice registration
         state changes. Voice radio tech change will always trigger an update of
         phone object irrespective of this config -->
    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>

    <!-- Values for GPS configuration -->
    <string-array translatable="false" name="config_gpsParameters">
        <item>SUPL_HOST=supl.google.com</item>
        <item>SUPL_PORT=7275</item>
        <item>XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin</item>
        <item>XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin</item>
        <item>XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin</item>
        <item>NTP_SERVER=north-america.pool.ntp.org</item>
        <item>SUPL_MODE=1</item>
        <item>SUPL_VER=0x20000</item>
        <item>LPP_PROFILE=0</item>
        <item>NMEA_PROVIDER=0</item>
        <item>A_GLONASS_POS_PROTOCOL_SELECT=0</item>
        <item>ERR_ESTIMATE=0</item>
        <item>INTERMEDIATE_POS=0</item>
        <item>SUPL_ES=0</item>
    </string-array>

    <!-- The RadioAccessFamilies supported by the device.
         Empty is viewed as "all".  Only used on devices which
         don't support RIL_REQUEST_GET_RADIO_CAPABILITY
         format is UMTS|LTE|... -->
    <string translatable="false" name="config_radio_access_family">GSM | WCDMA | LTE | CDMA | EVDO</string>

    <string-array name="config_cell_retries_per_error_code">
        <item>36,3</item> <!-- REGULAR_DEACTIVATION, 3 retries -->
    </string-array>

    <!-- True if Unprocessed audio source supports the required frequency range and level -->
    <bool name="config_supportAudioSourceUnprocessed">true</bool>
</resources>