Merge "Basic setup for LT26."

8 files changed, 158 insertions, 0 deletions

diff --git a/AndroidProducts.mk b/AndroidProducts.mk
new file mode 100644
index 0000000..05bde57
--- /dev/null
+++ b/AndroidProducts.mk
@@ -0,0 +1,2 @@
+PRODUCT_MAKEFILES := \
+	$(LOCAL_DIR)/full_lt26.mk
diff --git a/BoardConfig.mk b/BoardConfig.mk
new file mode 100644
index 0000000..b34d318
--- /dev/null
+++ b/BoardConfig.mk
@@ -0,0 +1,27 @@
+# Copyright 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# This file sets variables that control the way modules are built
+# thorughout the system. It should not be used to conditionally
+# disable makefiles (the proper mechanism to control what gets
+# included in a build is to use PRODUCT_PACKAGES in a product
+# definition file).
+#
+
+TARGET_CPU_ABI := armeabi-v7a
+TARGET_CPU_ABI2 := armeabi
+TARGET_CPU_SMP := true
+TARGET_ARCH := arm
+TARGET_ARCH_VARIANT := armv7-a-neon
diff --git a/CleanSpec.mk b/CleanSpec.mk
new file mode 100644
index 0000000..ab18a15
--- /dev/null
+++ b/CleanSpec.mk
@@ -0,0 +1,49 @@
+# Copyright 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
diff --git a/board-info.txt b/board-info.txt
new file mode 100644
index 0000000..197f799
--- /dev/null
+++ b/board-info.txt
@@ -0,0 +1 @@
+require board=LT26i
diff --git a/device.mk b/device.mk
new file mode 100644
index 0000000..29431a7
--- /dev/null
+++ b/device.mk
@@ -0,0 +1,24 @@
+#
+# Copyright 2012 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+ifeq ($(TARGET_PREBUILT_KERNEL),)
+  LOCAL_KERNEL := device/sony/lt26/kernel
+else
+  LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
+endif
+
+PRODUCT_COPY_FILES += \
+    $(LOCAL_KERNEL):kernel
diff --git a/full_lt26.mk b/full_lt26.mk
new file mode 100644
index 0000000..bca49a2
--- /dev/null
+++ b/full_lt26.mk
@@ -0,0 +1,32 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# This file is the build configuration for a full Android
+# build for lt26 hardware. This cleanly combines a set of
+# device-specific aspects (drivers) with a device-agnostic
+# product configuration (apps).
+#
+
+# Inherit from those products. Most specific first.
+$(call inherit-product, device/sony/lt26/device.mk)
+# This is where we'd set a backup provider if we had one
+#$(call inherit-product, device/sample/products/backup_overlay.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)
+
+# Discard inherited values and use our own instead.
+PRODUCT_NAME := full_lt26
+PRODUCT_DEVICE := lt26
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := Full Android on LT26
diff --git a/kernel b/kernel
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/kernel
diff --git a/vendorsetup.sh b/vendorsetup.sh
new file mode 100644
index 0000000..503e2e9
--- /dev/null
+++ b/vendorsetup.sh
@@ -0,0 +1,23 @@
+#
+# Copyright 2008 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This file is executed by build/envsetup.sh, and can use anything
+# defined in envsetup.sh.
+#
+# In particular, you can add lunch options with the add_lunch_combo
+# function: add_lunch_combo generic-eng
+
+# add_lunch_combo full_lt26-userdebug