diff options
Diffstat (limited to 'plat/marvell/armada/a8k')
7 files changed, 500 insertions, 1 deletions
diff --git a/plat/marvell/armada/a8k/a70x0_mochabin/board/dram_port.c b/plat/marvell/armada/a8k/a70x0_mochabin/board/dram_port.c new file mode 100644 index 000000000..68d335b63 --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_mochabin/board/dram_port.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2021 Sartura Ltd. + * Copyright (C) 2021 Globalscale technologies, Inc. + * Copyright (C) 2021 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include <arch_helpers.h> +#include <common/debug.h> + +#include <mv_ddr_if.h> +#include <plat_marvell.h> + +/* + * This function may modify the default DRAM parameters + * based on information received from SPD or bootloader + * configuration located on non volatile storage + */ +void plat_marvell_dram_update_topology(void) +{ +} + +/* + * This struct provides the DRAM training code with + * the appropriate board DRAM configuration + */ +#if DDR_TOPOLOGY == 0 +static struct mv_ddr_topology_map board_topology_map_2g = { +/* 1CS 4Gb x4 devices of Samsung K4A4G085WF */ + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X subphys */ + { { { {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0} }, + SPEED_BIN_DDR_2400R, /* speed_bin */ + MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */ + MV_DDR_DIE_CAP_4GBIT, /* die capacity */ + MV_DDR_FREQ_SAR, /* frequency */ + 0, 0, /* cas_l, cas_wl */ + MV_DDR_TEMP_LOW} }, /* temperature */ + BUS_MASK_32BIT, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + NOT_COMBINED, /* ddr twin-die combined*/ + { {0} }, /* raw spd data */ + {0}, /* timing parameters */ + { /* electrical configuration */ + { /* memory electrical configuration */ + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */ + { + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */ + }, + { + MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */ + MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */ + }, + MV_DDR_DIC_RZQ_DIV7 /* dic */ + }, + { /* phy electrical configuration */ + MV_DDR_OHM_30, /* data_drv_p */ + MV_DDR_OHM_30, /* data_drv_n */ + MV_DDR_OHM_30, /* ctrl_drv_p */ + MV_DDR_OHM_30, /* ctrl_drv_n */ + { + MV_DDR_OHM_60, /* odt_p 1cs */ + MV_DDR_OHM_120 /* odt_p 2cs */ + }, + { + MV_DDR_OHM_60, /* odt_n 1cs */ + MV_DDR_OHM_120 /* odt_n 2cs */ + }, + }, + { /* mac electrical configuration */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */ + MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */ + }, + } +}; +#endif + +#if DDR_TOPOLOGY == 1 +static struct mv_ddr_topology_map board_topology_map_4g = { +/* 1CS 8Gb x4 devices of Samsung K4A8G085WC-BCTD */ + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X subphys */ + { { { {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0}, + {0x1, 0x2, 0, 0} }, + SPEED_BIN_DDR_2400R, /* speed_bin */ + MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */ + MV_DDR_DIE_CAP_8GBIT, /* die capacity */ + MV_DDR_FREQ_SAR, /* frequency */ + 0, 0, /* cas_l, cas_wl */ + MV_DDR_TEMP_LOW} }, /* temperature */ + BUS_MASK_32BIT, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + NOT_COMBINED, /* ddr twin-die combined*/ + { {0} }, /* raw spd data */ + {0}, /* timing parameters */ + { /* electrical configuration */ + { /* memory electrical configuration */ + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */ + { + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */ + }, + { + MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */ + MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */ + }, + MV_DDR_DIC_RZQ_DIV7 /* dic */ + }, + { /* phy electrical configuration */ + MV_DDR_OHM_30, /* data_drv_p */ + MV_DDR_OHM_30, /* data_drv_n */ + MV_DDR_OHM_30, /* ctrl_drv_p */ + MV_DDR_OHM_30, /* ctrl_drv_n */ + { + MV_DDR_OHM_60, /* odt_p 1cs */ + MV_DDR_OHM_120 /* odt_p 2cs */ + }, + { + MV_DDR_OHM_60, /* odt_n 1cs */ + MV_DDR_OHM_120 /* odt_n 2cs */ + }, + }, + { /* mac electrical configuration */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */ + MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */ + }, + } +}; +#endif + +#if DDR_TOPOLOGY == 2 +static struct mv_ddr_topology_map board_topology_map_8g = { +/* 2CS 8Gb x8 devices of Micron MT40A1G8WE-083E IT */ + DEBUG_LEVEL_ERROR, + 0x1, /* active interfaces */ + /* cs_mask, mirror, dqs_swap, ck_swap X subphys */ + { { { {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0}, + {0x3, 0x2, 0, 0} }, + SPEED_BIN_DDR_2400R, /* speed_bin */ + MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */ + MV_DDR_DIE_CAP_8GBIT, /* die capacity */ + MV_DDR_FREQ_SAR, /* frequency */ + 0, 0, /* cas_l, cas_wl */ + MV_DDR_TEMP_LOW} }, /* temperature */ + BUS_MASK_32BIT, /* subphys mask */ + MV_DDR_CFG_DEFAULT, /* ddr configuration data source */ + NOT_COMBINED, /* ddr twin-die combined*/ + { {0} }, /* raw spd data */ + {0}, /* timing parameters */ + { /* electrical configuration */ + { /* memory electrical configuration */ + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */ + { + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */ + }, + { + MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */ + MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */ + }, + MV_DDR_DIC_RZQ_DIV7 /* dic */ + }, + { /* phy electrical configuration */ + MV_DDR_OHM_30, /* data_drv_p */ + MV_DDR_OHM_30, /* data_drv_n */ + MV_DDR_OHM_30, /* ctrl_drv_p */ + MV_DDR_OHM_30, /* ctrl_drv_n */ + { + MV_DDR_OHM_60, /* odt_p 1cs */ + MV_DDR_OHM_120 /* odt_p 2cs */ + }, + { + MV_DDR_OHM_60, /* odt_n 1cs */ + MV_DDR_OHM_120 /* odt_n 2cs */ + }, + }, + { /* mac electrical configuration */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */ + MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */ + MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */ + }, + } +}; +#endif + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void) +{ +/* a70x0_mochabin board supports 3 DDR4 models (2G/1CS, 4G/1CS, 8G/2CS) */ +#if DDR_TOPOLOGY == 0 + return &board_topology_map_2g; +#elif DDR_TOPOLOGY == 1 + return &board_topology_map_4g; +#elif DDR_TOPOLOGY == 2 + return &board_topology_map_8g; +#else + #error "Unknown DDR topology" +#endif +} diff --git a/plat/marvell/armada/a8k/a70x0_mochabin/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a70x0_mochabin/board/marvell_plat_config.c new file mode 100644 index 000000000..1ed63237a --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_mochabin/board/marvell_plat_config.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2021 Sartura Ltd. + * Copyright (C) 2021 Globalscale technologies, Inc. + * Copyright (C) 2021 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#include <armada_common.h> + +/* + * If bootrom is currently at BLE there's no need to include the memory + * maps structure at this point + */ +#include <mvebu_def.h> +#ifndef IMAGE_BLE + +/***************************************************************************** + * AMB Configuration + ***************************************************************************** + */ +struct addr_map_win amb_memory_map[] = { + /* CP0 SPI1 CS0 Direct Mode access */ + {0xf900, 0x1000000, AMB_SPI1_CS0_ID}, +}; + +int marvell_get_amb_memory_map(struct addr_map_win **win, + uint32_t *size, uintptr_t base) +{ + *win = amb_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(amb_memory_map); + + return 0; +} +#endif + +/***************************************************************************** + * IO_WIN Configuration + ***************************************************************************** + */ +struct addr_map_win io_win_memory_map[] = { +#ifndef IMAGE_BLE + /* MCI 0 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID}, + /* MCI 1 indirect window */ + {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID}, +#endif +}; + +uint32_t marvell_get_io_win_gcr_target(int ap_index) +{ + return PIDI_TID; +} + +int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win, + uint32_t *size) +{ + *win = io_win_memory_map; + if (*win == NULL) + *size = 0; + else + *size = ARRAY_SIZE(io_win_memory_map); + + return 0; +} + +#ifndef IMAGE_BLE +/***************************************************************************** + * IOB Configuration + ***************************************************************************** + */ +struct addr_map_win iob_memory_map[] = { + /* PEX1_X1 window */ + {0x00000000f7000000, 0x1000000, PEX1_TID}, + /* PEX2_X1 window */ + {0x00000000f8000000, 0x1000000, PEX2_TID}, + {0x00000000c0000000, 0x30000000, PEX2_TID}, + {0x0000000800000000, 0x100000000, PEX2_TID}, + /* PEX0_X4 window */ + {0x00000000f6000000, 0x1000000, PEX0_TID}, + /* SPI1_CS0 (RUNIT) window */ + {0x00000000f9000000, 0x1000000, RUNIT_TID}, +}; + +int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size, + uintptr_t base) +{ + *win = iob_memory_map; + *size = ARRAY_SIZE(iob_memory_map); + + return 0; +} +#endif + +/***************************************************************************** + * CCU Configuration + ***************************************************************************** + */ +struct addr_map_win ccu_memory_map[] = { /* IO window */ +#ifdef IMAGE_BLE + {0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */ +#else +#if LLC_SRAM + /* This entry is prepared for OP-TEE OS that enables the LLC SRAM + * and changes the window target to SRAM_TID. + */ + {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID}, +#endif + {0x00000000f2000000, 0xe000000, IO_0_TID}, + {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */ + {0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */ +#endif +}; + +uint32_t marvell_get_ccu_gcr_target(int ap) +{ + return DRAM_0_TID; +} + +int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win, + uint32_t *size) +{ + *win = ccu_memory_map; + *size = ARRAY_SIZE(ccu_memory_map); + + return 0; +} + +#ifdef IMAGE_BLE +/***************************************************************************** + * SKIP IMAGE Configuration + ***************************************************************************** + */ +#if PLAT_RECOVERY_IMAGE_ENABLE +void *plat_marvell_get_skip_image_data(void) +{ + /* No recovery button on a70x0_mochabin board */ + return NULL; +} +#endif +#endif diff --git a/plat/marvell/armada/a8k/a70x0_mochabin/board/phy-porting-layer.h b/plat/marvell/armada/a8k/a70x0_mochabin/board/phy-porting-layer.h new file mode 100644 index 000000000..ab76c3105 --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_mochabin/board/phy-porting-layer.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2021 Sartura Ltd. + * Copyright (C) 2021 Globalscale technologies, Inc. + * Copyright (C) 2021 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#ifndef __PHY_PORTING_LAYER_H +#define __PHY_PORTING_LAYER_H + +#define MAX_LANE_NR 6 + +static const struct xfi_params + xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + /* AP0 */ + { + /* CP 0 */ + { + { 0 }, /* Comphy0 */ + { 0 }, /* Comphy1 */ + { 0 }, /* Comphy2 */ + { 0 }, /* Comphy3 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, .align90 = 0x60, + .g1_dfe_res = 0x1, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, .g1_tx_emph_en = 0x1, + .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 1 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + }, + }, +}; + +static const struct sata_params + sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + /* AP0 */ + { + /* CP 0 */ + { + { 0 }, /* Comphy0 */ + { 0 }, /* Comphy1 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy2 */ + { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e, + .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe, + .g1_emph_en = 0x1, .g2_emph_en = 0x1, .g3_emph_en = 0x1, + .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1, .g3_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0, .g3_tx_emph_en = 0x0, + .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, .g3_tx_emph = 0x1, + .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, .g3_ffe_cap_sel = 0xf, + .align90 = 0x61, + .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3, .g3_rx_selmuff = 0x3, + .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0, .g3_rx_selmufi = 0x3, + .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1, .g3_rx_selmupf = 0x2, + .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0, .g3_rx_selmupi = 0x2, + .polarity_invert = COMPHY_POLARITY_NO_INVERT, + .valid = 0x1 + }, /* Comphy3 */ + { 0 }, /* Comphy4 */ + { 0 }, /* Comphy5 */ + }, + }, +}; + +static const struct usb_params + usb_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = { + [0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = { + .polarity_invert = COMPHY_POLARITY_NO_INVERT + }, +}; + +#endif /* __PHY_PORTING_LAYER_H */ diff --git a/plat/marvell/armada/a8k/a70x0_mochabin/mvebu_def.h b/plat/marvell/armada/a8k/a70x0_mochabin/mvebu_def.h new file mode 100644 index 000000000..768f73596 --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_mochabin/mvebu_def.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2021 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +#ifndef MVEBU_DEF_H +#define MVEBU_DEF_H + +#include <a8k_plat_def.h> + +#define CP_COUNT 1 /* A70x0 has single CP0 */ + +#endif /* MVEBU_DEF_H */ diff --git a/plat/marvell/armada/a8k/a70x0_mochabin/platform.mk b/plat/marvell/armada/a8k/a70x0_mochabin/platform.mk new file mode 100644 index 000000000..2495591ae --- /dev/null +++ b/plat/marvell/armada/a8k/a70x0_mochabin/platform.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2021 Marvell International Ltd. +# +# SPDX-License-Identifier: BSD-3-Clause +# https://spdx.org/licenses +# + +PCI_EP_SUPPORT := 0 + +CP_NUM := 1 +$(eval $(call add_define,CP_NUM)) + +DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg + +MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c + +BOARD_DIR := $(shell dirname $(lastword $(MAKEFILE_LIST))) +include plat/marvell/armada/a8k/common/a8k_common.mk + +include plat/marvell/armada/common/marvell_common.mk diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk index 30e6280e7..4d8a87fd1 100644 --- a/plat/marvell/armada/a8k/common/a8k_common.mk +++ b/plat/marvell/armada/a8k/common/a8k_common.mk @@ -75,6 +75,10 @@ endif # This define specifies DDR type for BLE $(eval $(call add_define,CONFIG_DDR4)) +# This define specifies DDR topology for BLE +DDR_TOPOLOGY ?= 0 +$(eval $(call add_define,DDR_TOPOLOGY)) + MARVELL_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \ drivers/arm/gic/v2/gicv2_main.c \ drivers/arm/gic/v2/gicv2_helpers.c \ @@ -166,7 +170,7 @@ endif BLE_PATH ?= $(PLAT_COMMON_BASE)/ble include ${BLE_PATH}/ble.mk -$(eval $(call MAKE_BL,e)) +$(eval $(call MAKE_BL,ble)) clean realclean distclean: mrvl_clean diff --git a/plat/marvell/armada/a8k/common/ble/ble.mk b/plat/marvell/armada/a8k/common/ble/ble.mk index 87e2ce020..160e98f12 100644 --- a/plat/marvell/armada/a8k/common/ble/ble.mk +++ b/plat/marvell/armada/a8k/common/ble/ble.mk @@ -28,6 +28,7 @@ $(BLE_OBJS): PLAT_INCLUDES += -I$(MV_DDR_PATH) $(BLE_OBJS): $(MV_DDR_LIB) $(MV_DDR_LIB): FORCE +# Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds $(if $(value MV_DDR_PATH),,$(error "Platform '$(PLAT)' for BLE requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory")) $(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist")) $(if $(shell git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid mv-ddr-marvell git repository")) |