1 files changed, 105 insertions, 0 deletions
diff --git a/plat/nxp/common/setup/common.mk b/plat/nxp/common/setup/common.mk
new file mode 100644
index 000000000..1fcf1d093
--- /dev/null
+++ b/plat/nxp/common/setup/common.mk
@@ -0,0 +1,105 @@
+#
+# Copyright 2018-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+###############################################################################
+# Flow begins in BL2 at EL3 mode
+BL2_AT_EL3			:= 1
+
+# Though one core is powered up by default, there are
+# platform specific ways to release more than one core
+COLD_BOOT_SINGLE_CPU		:= 0
+
+PROGRAMMABLE_RESET_ADDRESS	:= 1
+
+USE_COHERENT_MEM		:= 0
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS			:= 1
+
+PLAT_XLAT_TABLES_DYNAMIC	:= 0
+
+ENABLE_SVE_FOR_NS		:= 0
+
+ENABLE_STACK_PROTECTOR		:= 0
+
+ERROR_DEPRECATED		:= 0
+
+LS_DISABLE_TRUSTED_WDOG		:= 1
+
+# On ARM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA	:= 1
+
+# Enable new version of image loading on ARM platforms
+LOAD_IMAGE_V2			:= 1
+
+RCW				:= ""
+
+ifneq (${SPD},none)
+$(eval $(call add_define, NXP_LOAD_BL32))
+endif
+
+###############################################################################
+
+PLAT_TOOL_PATH		:=	tools/nxp
+CREATE_PBL_TOOL_PATH	:=	${PLAT_TOOL_PATH}/create_pbl
+PLAT_SETUP_PATH		:=	${PLAT_PATH}/common/setup
+
+PLAT_INCLUDES		+=	-I${PLAT_SETUP_PATH}/include			\
+				-Iinclude/plat/arm/common			\
+				-Iinclude/drivers/arm   			\
+				-Iinclude/lib					\
+				-Iinclude/drivers/io			\
+				-Ilib/psci
+
+# Required without TBBR.
+# To include the defines for DDR PHY Images.
+PLAT_INCLUDES		+=	-Iinclude/common/tbbr
+
+include ${PLAT_SETUP_PATH}/core.mk
+PLAT_BL_COMMON_SOURCES	+= 	${CPU_LIBS} \
+				plat/nxp/common/setup/ls_err.c		\
+				plat/nxp/common/setup/ls_common.c
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES	+=	${PLAT_SETUP_PATH}/ls_stack_protector.c
+endif
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+
+BL2_SOURCES		+=	drivers/io/io_fip.c			\
+				drivers/io/io_memmap.c			\
+				drivers/io/io_storage.c			\
+				common/desc_image_load.c 		\
+				plat/nxp/common/setup/ls_image_load.c		\
+				plat/nxp/common/setup/ls_io_storage.c		\
+				plat/nxp/common/setup/ls_bl2_el3_setup.c	\
+				plat/nxp/common/setup/${ARCH}/ls_bl2_mem_params_desc.c
+
+BL31_SOURCES		+=	plat/nxp/common/setup/ls_bl31_setup.c	\
+
+ifeq (${LS_EL3_INTERRUPT_HANDLER}, yes)
+$(eval $(call add_define, LS_EL3_INTERRUPT_HANDLER))
+BL31_SOURCES		+=	plat/nxp/common/setup/ls_interrupt_mgmt.c
+endif
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES		+=	${TEST_SOURCES}
+endif
+
+# Verify build config
+# -------------------
+
+ifneq (${LOAD_IMAGE_V2}, 1)
+  $(error Error: Layerscape needs LOAD_IMAGE_V2=1)
+else
+$(eval $(call add_define,LOAD_IMAGE_V2))
+endif
+
+include $(CREATE_PBL_TOOL_PATH)/create_pbl.mk