diff options
Diffstat (limited to 'plat/nxp/soc-ls1028a/soc.def')
| -rw-r--r-- | plat/nxp/soc-ls1028a/soc.def | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1028a/soc.def b/plat/nxp/soc-ls1028a/soc.def new file mode 100644 index 000000000..c23c1bb30 --- /dev/null +++ b/plat/nxp/soc-ls1028a/soc.def @@ -0,0 +1,97 @@ +# +# Copyright 2018-2021 NXP +# +# SPDX-License-Identifier: BSD-3-Clause +# +# +#------------------------------------------------------------------------------ +# +# This file contains the basic architecture definitions that drive the build +# +# ----------------------------------------------------------------------------- + +CORE_TYPE := a72 + +CACHE_LINE := 6 + +# Set to GIC400 or GIC500 +GIC := GIC500 + +# Set to CCI400 or CCN504 or CCN508 +INTERCONNECT := CCI400 + +# Layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 +CHASSIS := 3_2 + +# TZC used is TZC380 or TZC400 +TZC_ID := TZC400 + +# CONSOLE is NS16550 or PL011 +CONSOLE := NS16550 + +# DDR PHY generation to be used +PLAT_DDR_PHY := PHY_GEN1 + +PHYS_SYS := 64 + +# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def +# Input to CST create_hdr_esbc tool +CSF_HDR_SZ := 0x3000 + +# In IMAGE_BL2, compile time flag for handling Cache coherency +# with CAAM for BL2 running from OCRAM +SEC_MEM_NON_COHERENT := yes + +# OCRAM MAP for BL2 +# Before BL2 +# 0x18000000 - 0x18009fff -> Used by ROM code +# 0x1800a000 - 0x1800dfff -> CSF header for BL2 +# For FlexSFlexSPI boot +# 0x1800e000 - 0x18040000 -> Reserved for BL2 binary +# For SD boot +# 0x1800e000 - 0x18030000 -> Reserved for BL2 binary +# 0x18030000 - 0x18040000 -> Reserved for SD buffer +OCRAM_START_ADDR := 0x18000000 +OCRAM_SIZE := 0x40000 + +# Area of OCRAM reserved by ROM code +NXP_ROM_RSVD := 0xa000 + +# Location of BL2 on OCRAM +BL2_BASE_ADDR := $(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) + $(CSF_HDR_SZ) ))) + +# Covert to HEX to be used by create_pbl.mk +BL2_BASE := $(shell echo "0x"$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc)) + +# BL2_HDR_LOC is at (BL2_BASE + NXP_ROM_RSVD) +# This value BL2_HDR_LOC + CSF_HDR_SZ should not +# overalp with BL2_BASE +# Input to CST create_hdr_isbc tool +BL2_HDR_LOC := 0x1800A000 + +# SoC ERRATAS to be enabled +ERRATA_SOC_A008850 := 1 + +ERRATA_DDR_A009803 := 1 +ERRATA_DDR_A009942 := 1 +ERRATA_DDR_A010165 := 1 + +# Enable dynamic memory mapping +PLAT_XLAT_TABLES_DYNAMIC := 1 + +# Define Endianness of each module +NXP_GUR_ENDIANNESS := LE +NXP_DDR_ENDIANNESS := LE +NXP_SEC_ENDIANNESS := LE +NXP_SFP_ENDIANNESS := LE +NXP_SNVS_ENDIANNESS := LE +NXP_ESDHC_ENDIANNESS := LE +NXP_QSPI_ENDIANNESS := LE +NXP_FSPI_ENDIANNESS := LE +NXP_SCFG_ENDIANNESS := LE +NXP_GPIO_ENDIANNESS := LE + +NXP_SFP_VER := 3_4 + +# OCRAM ECC Enabled +OCRAM_ECC_EN := yes |