aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--coreutils/echo.c112
-rw-r--r--testsuite/echo/echo-prints-dash1
-rw-r--r--testsuite/echo/echo-prints-non-opts1
-rw-r--r--testsuite/echo/echo-prints-slash_000413
-rw-r--r--testsuite/echo/echo-prints-slash_00413
-rw-r--r--testsuite/echo/echo-prints-slash_0413
-rw-r--r--testsuite/echo/echo-prints-slash_413
7 files changed, 70 insertions, 56 deletions
diff --git a/coreutils/echo.c b/coreutils/echo.c
index 5fa3d10c5..42c3f9ed8 100644
--- a/coreutils/echo.c
+++ b/coreutils/echo.c
@@ -50,7 +50,6 @@ int echo_main(int argc UNUSED_PARAM, char **argv)
char *out;
char *buffer;
unsigned buflen;
- int r;
#if !ENABLE_FEATURE_FANCY_ECHO
enum {
eflag = '\\',
@@ -59,40 +58,40 @@ int echo_main(int argc UNUSED_PARAM, char **argv)
argv++;
#else
- const char *p;
char nflag = 1;
char eflag = 0;
while ((arg = *++argv) != NULL) {
- if (!arg || arg[0] != '-')
- break;
+ char n, e;
+
+ if (arg[0] != '-')
+ break; /* not an option arg, echo it */
/* If it appears that we are handling options, then make sure
* that all of the options specified are actually valid.
* Otherwise, the string should just be echoed.
*/
- p = arg + 1;
- if (!*p) /* A single '-', so echo it. */
- break;
-
+ arg++;
+ n = nflag;
+ e = eflag;
do {
- if (!strrchr("neE", *p))
+ if (*arg == 'n')
+ n = 0;
+ else if (*arg == 'e')
+ e = '\\';
+ else if (*arg != 'E') {
+ /* "-ccc" arg with one of c's invalid, echo it */
+ /* arg consisting from just "-" also handled here */
goto just_echo;
- } while (*++p);
-
- /* All of the options in this arg are valid, so handle them. */
- p = arg + 1;
- do {
- if (*p == 'n')
- nflag = 0;
- if (*p == 'e')
- eflag = '\\';
- } while (*++p);
+ }
+ } while (*++arg);
+ nflag = n;
+ eflag = e;
}
just_echo:
#endif
- buflen = 1;
+ buflen = 0;
pp = argv;
while ((arg = *pp) != NULL) {
buflen += strlen(arg) + 1;
@@ -106,29 +105,32 @@ int echo_main(int argc UNUSED_PARAM, char **argv)
if (!eflag) {
/* optimization for very common case */
out = stpcpy(out, arg);
- } else while ((c = *arg++)) {
- if (c == eflag) { /* Check for escape seq. */
+ } else
+ while ((c = *arg++) != '\0') {
+ if (c == eflag) {
+ /* This is an "\x" sequence */
+
if (*arg == 'c') {
- /* '\c' means cancel newline and
+ /* "\c" means cancel newline and
* ignore all subsequent chars. */
goto do_write;
}
-#if !ENABLE_FEATURE_FANCY_ECHO
- /* SUSv3 specifies that octal escapes must begin with '0'. */
- if ( ((int)(unsigned char)(*arg) - '0') >= 8) /* '8' or bigger */
-#endif
- {
- /* Since SUSv3 mandates a first digit of 0, 4-digit octals
- * of the form \0### are accepted. */
- if (*arg == '0') {
- /* NB: don't turn "...\0" into "...\" */
- if (arg[1] && ((unsigned char)(arg[1]) - '0') < 8) {
- arg++;
- }
+ /* Since SUSv3 mandates a first digit of 0, 4-digit octals
+ * of the form \0### are accepted. */
+ if (*arg == '0') {
+ if ((unsigned char)(arg[1] - '0') < 8) {
+ /* 2nd char is 0..7: skip leading '0' */
+ arg++;
}
- /* bb_process_escape_sequence handles NUL correctly
- * ("...\" case). */
- c = bb_process_escape_sequence(&arg);
+ }
+ /* bb_process_escape_sequence handles NUL correctly
+ * ("...\" case). */
+ {
+ /* optimization: don't force arg to be on-stack,
+ * use another variable for that. ~30 bytes win */
+ const char *z = arg;
+ c = bb_process_escape_sequence(&z);
+ arg = z;
}
}
*out++ = c;
@@ -144,16 +146,18 @@ int echo_main(int argc UNUSED_PARAM, char **argv)
}
do_write:
- r = full_write(STDOUT_FILENO, buffer, out - buffer);
+ /* Careful to error out on partial writes too (think ENOSPC!) */
+ errno = 0;
+ /*r =*/ full_write(STDOUT_FILENO, buffer, out - buffer);
free(buffer);
- if (r < 0) {
+ if (/*WRONG:r < 0*/ errno) {
bb_perror_msg(bb_msg_write_error);
return 1;
}
return 0;
}
-/*-
+/*
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
@@ -239,7 +243,7 @@ int echo_main(int argc, char **argv)
goto just_echo;
do {
- if (!strrchr("neE", *p))
+ if (!strchr("neE", *p))
goto just_echo;
} while (*++p);
@@ -265,27 +269,23 @@ int echo_main(int argc, char **argv)
/* optimization for very common case */
p += strlen(arg);
} else while ((c = *arg++)) {
- if (c == eflag) { /* Check for escape seq. */
+ if (c == eflag) {
+ /* This is an "\x" sequence */
+
if (*arg == 'c') {
- /* '\c' means cancel newline and
+ /* "\c" means cancel newline and
* ignore all subsequent chars. */
cur_io->iov_len = p - (char*)cur_io->iov_base;
cur_io++;
goto ret;
}
-#if !ENABLE_FEATURE_FANCY_ECHO
- /* SUSv3 specifies that octal escapes must begin with '0'. */
- if ( (((unsigned char)*arg) - '1') >= 7)
-#endif
- {
- /* Since SUSv3 mandates a first digit of 0, 4-digit octals
- * of the form \0### are accepted. */
- if (*arg == '0' && ((unsigned char)(arg[1]) - '0') < 8) {
- arg++;
- }
- /* bb_process_escape_sequence can handle nul correctly */
- c = bb_process_escape_sequence( (void*) &arg);
+ /* Since SUSv3 mandates a first digit of 0, 4-digit octals
+ * of the form \0### are accepted. */
+ if (*arg == '0' && (unsigned char)(arg[1] - '0') < 8) {
+ arg++;
}
+ /* bb_process_escape_sequence can handle nul correctly */
+ c = bb_process_escape_sequence( (void*) &arg);
}
*p++ = c;
}
diff --git a/testsuite/echo/echo-prints-dash b/testsuite/echo/echo-prints-dash
new file mode 100644
index 000000000..ddcdbadf7
--- /dev/null
+++ b/testsuite/echo/echo-prints-dash
@@ -0,0 +1 @@
+test "`busybox echo - | od -t x1 | head -n 1`" = "0000000 2d 0a"
diff --git a/testsuite/echo/echo-prints-non-opts b/testsuite/echo/echo-prints-non-opts
new file mode 100644
index 000000000..c7d1e201a
--- /dev/null
+++ b/testsuite/echo/echo-prints-non-opts
@@ -0,0 +1 @@
+test "`busybox echo -neEZ | od -t x1 | head -n 1`" = "0000000 2d 6e 65 45 5a 0a"
diff --git a/testsuite/echo/echo-prints-slash_00041 b/testsuite/echo/echo-prints-slash_00041
new file mode 100644
index 000000000..9cffabde0
--- /dev/null
+++ b/testsuite/echo/echo-prints-slash_00041
@@ -0,0 +1,3 @@
+# FEATURE: CONFIG_FEATURE_FANCY_ECHO
+
+test "`busybox echo -ne '\00041z' | od -t x1 | head -n 1`" = "0000000 04 31 7a"
diff --git a/testsuite/echo/echo-prints-slash_0041 b/testsuite/echo/echo-prints-slash_0041
new file mode 100644
index 000000000..b07429dfd
--- /dev/null
+++ b/testsuite/echo/echo-prints-slash_0041
@@ -0,0 +1,3 @@
+# FEATURE: CONFIG_FEATURE_FANCY_ECHO
+
+test "`busybox echo -ne '\0041z' | od -t x1 | head -n 1`" = "0000000 21 7a"
diff --git a/testsuite/echo/echo-prints-slash_041 b/testsuite/echo/echo-prints-slash_041
new file mode 100644
index 000000000..1d70cec92
--- /dev/null
+++ b/testsuite/echo/echo-prints-slash_041
@@ -0,0 +1,3 @@
+# FEATURE: CONFIG_FEATURE_FANCY_ECHO
+
+test "`busybox echo -ne '\041z' | od -t x1 | head -n 1`" = "0000000 21 7a"
diff --git a/testsuite/echo/echo-prints-slash_41 b/testsuite/echo/echo-prints-slash_41
new file mode 100644
index 000000000..6d8999b4e
--- /dev/null
+++ b/testsuite/echo/echo-prints-slash_41
@@ -0,0 +1,3 @@
+# FEATURE: CONFIG_FEATURE_FANCY_ECHO
+
+test "`busybox echo -ne '\41z' | od -t x1 | head -n 1`" = "0000000 21 7a"
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 17:18:43 +0000