cmdline/docs/*.d: switch to using ## instead of .IP

To make the editing easier. To write and to read.

Closes #12667

13 files changed, 305 insertions, 192 deletions

diff --git a/docs/cmdline-opts/data-urlencode.d b/docs/cmdline-opts/data-urlencode.d
index 3c436b26b..51c0b4b7c 100644
--- a/docs/cmdline-opts/data-urlencode.d
+++ b/docs/cmdline-opts/data-urlencode.d
@@ -19,24 +19,26 @@ that this performs URL-encoding.
 To be CGI-compliant, the <data> part should begin with a *name* followed
 by a separator and a content specification. The <data> part can be passed to
 curl using one of the following syntaxes:
-.RS
-.IP "content"
+
+## content
 This makes curl URL-encode the content and pass that on. Just be careful
 so that the content does not contain any = or @ symbols, as that makes
 the syntax match one of the other cases below!
-.IP "=content"
+
+## =content
 This makes curl URL-encode the content and pass that on. The preceding =
 symbol is not included in the data.
-.IP "name=content"
+
+## name=content
 This makes curl URL-encode the content part and pass that on. Note that
 the name part is expected to be URL-encoded already.
-.IP "@filename"
+
+## @filename
 This makes curl load data from the given file (including any newlines),
 URL-encode that data and pass it on in the POST.
-.IP "name@filename"
+
+## name@filename
 This makes curl load data from the given file (including any newlines),
 URL-encode that data and pass it on in the POST. The name part gets an equal
 sign appended, resulting in *name=urlencoded-file-content*. Note that the
 name is expected to be URL-encoded already.
-.RE
-.IP
diff --git a/docs/cmdline-opts/delegation.d b/docs/cmdline-opts/delegation.d
index 794184934..004514f37 100644
--- a/docs/cmdline-opts/delegation.d
+++ b/docs/cmdline-opts/delegation.d
@@ -12,13 +12,13 @@ Multi: single
 ---
 Set LEVEL to tell the server what it is allowed to delegate when it
 comes to user credentials.
-.RS
-.IP "none"
+
+## none
 Do not allow any delegation.
-.IP "policy"
+
+## policy
 Delegates if and only if the OK-AS-DELEGATE flag is set in the Kerberos
 service ticket, which is a matter of realm policy.
-.IP "always"
+
+## always
 Unconditionally allow the server to delegate.
-.RE
-.IP
diff --git a/docs/cmdline-opts/ftp-method.d b/docs/cmdline-opts/ftp-method.d
index 8061d2b68..e3a08782b 100644
--- a/docs/cmdline-opts/ftp-method.d
+++ b/docs/cmdline-opts/ftp-method.d
@@ -14,17 +14,17 @@ Multi: single
 ---
 Control what method curl should use to reach a file on an FTP(S)
 server. The method argument should be one of the following alternatives:
-.RS
-.IP multicwd
+
+## multicwd
 curl does a single CWD operation for each path part in the given URL. For deep
 hierarchies this means many commands. This is how RFC 1738 says it should
 be done. This is the default but the slowest behavior.
-.IP nocwd
+
+## nocwd
 curl does no CWD at all. curl does SIZE, RETR, STOR etc and give a full
 path to the server for all these commands. This is the fastest behavior.
-.IP singlecwd
+
+## singlecwd
 curl does one CWD with the full target directory and then operates on the file
 "normally" (like in the multicwd case). This is somewhat more standards
 compliant than 'nocwd' but without the full penalty of 'multicwd'.
-.RE
-.IP
diff --git a/docs/cmdline-opts/ftp-port.d b/docs/cmdline-opts/ftp-port.d
index e1f4a1dba..3026778d9 100644
--- a/docs/cmdline-opts/ftp-port.d
+++ b/docs/cmdline-opts/ftp-port.d
@@ -18,18 +18,21 @@ option makes curl use active mode. curl then tells the server to connect back
 to the client's specified address and port, while passive mode asks the server
 to setup an IP address and port for it to connect to. <address> should be one
 of:
-.RS
-.IP interface
-e.g. "eth0" to specify which interface's IP address you want to use (Unix only)
-.IP "IP address"
-e.g. "192.168.10.1" to specify the exact IP address
-.IP "host name"
-e.g. "my.host.domain" to specify the machine
-.IP "-"
+
+## interface
+e.g. **eth0** to specify which interface's IP address you want to use (Unix only)
+
+## IP address
+e.g. **192.168.10.1** to specify the exact IP address
+
+## host name
+e.g. **my.host.domain** to specify the machine
+
+## -
 make curl pick the same IP address that is already used for the control
-connection
-.RE
-.IP
+connection. This is the recommended choice.
+
+##
 
 Disable the use of PORT with --ftp-pasv. Disable the attempt to use the EPRT
 command instead of PORT by using --disable-eprt. EPRT is really PORT++.
diff --git a/docs/cmdline-opts/proto.d b/docs/cmdline-opts/proto.d
index 6788ee567..68dd3a207 100644
--- a/docs/cmdline-opts/proto.d
+++ b/docs/cmdline-opts/proto.d
@@ -12,18 +12,21 @@ Multi: single
 Tells curl to limit what protocols it may use for transfers. Protocols are
 evaluated left to right, are comma separated, and are each a protocol name or
 'all', optionally prefixed by zero or more modifiers. Available modifiers are:
-.RS
-.IP +
+
+## +
 Permit this protocol in addition to protocols already permitted (this is
 the default if no modifier is used).
-.IP -
+
+## -
 Deny this protocol, removing it from the list of protocols already permitted.
-.IP =
+
+## =
 Permit only this protocol (ignoring the list already permitted), though
 subject to later modification by subsequent entries in the comma separated
 list.
-.RE
-.IP
+
+##
+
 For example: --proto -ftps uses the default protocols, but disables ftps
 
 --proto -all,https,+http only enables http and https
diff --git a/docs/cmdline-opts/quote.d b/docs/cmdline-opts/quote.d
index 51f7917fc..321025747 100644
--- a/docs/cmdline-opts/quote.d
+++ b/docs/cmdline-opts/quote.d
@@ -34,42 +34,51 @@ SFTP is a binary protocol. Unlike for FTP, curl interprets SFTP quote commands
 itself before sending them to the server. File names may be quoted
 shell-style to embed spaces or special characters. Following is the list of
 all supported SFTP quote commands:
-.RS
-.IP "atime date file"
+
+## atime date file
 The atime command sets the last access time of the file named by the file
 operand. The <date expression> can be all sorts of date strings, see the
 *curl_getdate(3)* man page for date expression details. (Added in 7.73.0)
-.IP "chgrp group file"
+
+## chgrp group file
 The chgrp command sets the group ID of the file named by the file operand to
 the group ID specified by the group operand. The group operand is a decimal
 integer group ID.
-.IP "chmod mode file"
+
+## chmod mode file
 The chmod command modifies the file mode bits of the specified file. The
 mode operand is an octal integer mode number.
-.IP "chown user file"
+
+## chown user file
 The chown command sets the owner of the file named by the file operand to the
 user ID specified by the user operand. The user operand is a decimal
 integer user ID.
-.IP "ln source_file target_file"
+
+## ln source_file target_file
 The ln and symlink commands create a symbolic link at the target_file location
 pointing to the source_file location.
-.IP "mkdir directory_name"
+
+## mkdir directory_name
 The mkdir command creates the directory named by the directory_name operand.
-.IP "mtime date file"
+
+## mtime date file
 The mtime command sets the last modification time of the file named by the
 file operand. The <date expression> can be all sorts of date strings, see the
 *curl_getdate(3)* man page for date expression details. (Added in 7.73.0)
-.IP "pwd"
+
+## pwd
 The pwd command returns the absolute path name of the current working directory.
-.IP "rename source target"
+
+## rename source target
 The rename command renames the file or directory named by the source
 operand to the destination path named by the target operand.
-.IP "rm file"
+
+## rm file
 The rm command removes the file specified by the file operand.
-.IP "rmdir directory"
+
+## rmdir directory
 The rmdir command removes the directory entry specified by the directory
 operand, provided it is empty.
-.IP "symlink source_file target_file"
+
+## symlink source_file target_file
 See ln.
-.RE
-.IP
diff --git a/docs/cmdline-opts/range.d b/docs/cmdline-opts/range.d
index 09ccf5f31..fc5267faa 100644
--- a/docs/cmdline-opts/range.d
+++ b/docs/cmdline-opts/range.d
@@ -13,24 +13,30 @@ Multi: single
 ---
 Retrieve a byte range (i.e. a partial document) from an HTTP/1.1, FTP or SFTP
 server or a local FILE. Ranges can be specified in a number of ways.
-.RS
-.IP 0-499
+
+## 0-499
 specifies the first 500 bytes
-.IP 500-999
+
+## 500-999
 specifies the second 500 bytes
-.IP -500
+
+## -500
 specifies the last 500 bytes
-.IP 9500-
+
+## 9500-
 specifies the bytes from offset 9500 and forward
-.IP 0-0,-1
+
+## 0-0,-1
 specifies the first and last byte only(*)(HTTP)
-.IP 100-199,500-599
+
+## 100-199,500-599
 specifies two separate 100-byte ranges(*) (HTTP)
-.RE
-.IP
-(*) = NOTE that this causes the server to reply with a multipart response,
-which is returned as-is by curl! Parsing or otherwise transforming this
-response is the responsibility of the caller.
+
+##
+
+(*) = NOTE that these make the server reply with a multipart response, which
+is returned as-is by curl! Parsing or otherwise transforming this response is
+the responsibility of the caller.
 
 Only digit characters (0-9) are valid in the 'start' and 'stop' fields of the
 'start-stop' range syntax. If a non-digit character is given in the range, the
diff --git a/docs/cmdline-opts/request.d b/docs/cmdline-opts/request.d
index 41d81c55a..4e022c5ea 100644
--- a/docs/cmdline-opts/request.d
+++ b/docs/cmdline-opts/request.d
@@ -15,8 +15,8 @@ Change the method to use when starting the transfer.
 
 curl passes on the verbatim string you give it its the request without any
 filter or other safe guards. That includes white space and control characters.
-.RS
-.IP HTTP
+
+## HTTP
 Specifies a custom request method to use when communicating with the HTTP
 server. The specified request method is used instead of the method otherwise
 used (which defaults to *GET*). Read the HTTP 1.1 specification for details
@@ -35,15 +35,17 @@ The method string you set with --request is used for all requests, which
 if you for example use --location may cause unintended side-effects when curl
 does not change request method according to the HTTP 30x response codes - and
 similar.
-.IP FTP
+
+## FTP
 Specifies a custom FTP command to use instead of *LIST* when doing file lists
 with FTP.
-.IP POP3
+
+## POP3
 Specifies a custom POP3 command to use instead of *LIST* or *RETR*.
 (Added in 7.26.0)
-.IP IMAP
+
+## IMAP
 Specifies a custom IMAP command to use instead of *LIST*. (Added in 7.30.0)
-.IP SMTP
+
+## SMTP
 Specifies a custom SMTP command to use instead of *HELP* or **VRFY**. (Added in 7.34.0)
-.RE
-.IP
diff --git a/docs/cmdline-opts/telnet-option.d b/docs/cmdline-opts/telnet-option.d
index 56bf5be63..2c8a76180 100644
--- a/docs/cmdline-opts/telnet-option.d
+++ b/docs/cmdline-opts/telnet-option.d
@@ -12,12 +12,11 @@ Multi: append
 ---
 Pass options to the telnet protocol. Supported options are:
 
-.RS
-.IP "TTYPE=<term>"
+## TTYPE=<term>
 Sets the terminal type.
-.IP "XDISPLOC=<X display>"
+
+## XDISPLOC=<X display>
 Sets the X display location.
-.IP "NEW_ENV=<var,val>"
+
+## NEW_ENV=<var,val>
 Sets an environment variable.
-.RE
-.IP
diff --git a/docs/cmdline-opts/tls-max.d b/docs/cmdline-opts/tls-max.d
index 2d52c1039..894cb76e9 100644
--- a/docs/cmdline-opts/tls-max.d
+++ b/docs/cmdline-opts/tls-max.d
@@ -19,16 +19,17 @@ is set by tlsv1.0, tlsv1.1, tlsv1.2 or tlsv1.3.
 If the connection is done without TLS, this option has no effect. This
 includes QUIC-using (HTTP/3) transfers.
 
-.RS
-.IP "default"
+## default
 Use up to recommended TLS version.
-.IP "1.0"
+
+## 1.0
 Use up to TLSv1.0.
-.IP "1.1"
+
+## 1.1
 Use up to TLSv1.1.
-.IP "1.2"
+
+## 1.2
 Use up to TLSv1.2.
-.IP "1.3"
+
+## 1.3
 Use up to TLSv1.3.
-.RE
-.IP
diff --git a/docs/cmdline-opts/variable.d b/docs/cmdline-opts/variable.d
index 202960197..31b9d00cc 100644
--- a/docs/cmdline-opts/variable.d
+++ b/docs/cmdline-opts/variable.d
@@ -38,14 +38,15 @@ content holding null bytes that are not encoded when expanded, causes an
 error.
 
 Available functions:
-.RS
-.IP trim
+
+## trim
 removes all leading and trailing white space.
-.IP json
+
+## json
 outputs the content using JSON string quoting rules.
-.IP url
+
+## url
 shows the content URL (percent) encoded.
-.IP b64
+
+## b64
 expands the variable base64 encoded
-.RE
-.IP
diff --git a/docs/cmdline-opts/version.d b/docs/cmdline-opts/version.d
index 8d231ce0c..9407736c5 100644
--- a/docs/cmdline-opts/version.d
+++ b/docs/cmdline-opts/version.d
@@ -21,68 +21,93 @@ reports to support.
 
 The fourth line (starts with "Features:") shows specific features libcurl
 reports to offer. Available features include:
-.RS
-.IP "alt-svc"
+
+## alt-svc
 Support for the Alt-Svc: header is provided.
-.IP "AsynchDNS"
+
+## AsynchDNS
 This curl uses asynchronous name resolves. Asynchronous name resolves can be
 done using either the c-ares or the threaded resolver backends.
-.IP "brotli"
+
+## brotli
 Support for automatic brotli compression over HTTP(S).
-.IP "CharConv"
+
+## CharConv
 curl was built with support for character set conversions (like EBCDIC)
-.IP "Debug"
+
+## Debug
 This curl uses a libcurl built with Debug. This enables more error-tracking
 and memory debugging etc. For curl-developers only!
-.IP "gsasl"
+
+## gsasl
 The built-in SASL authentication includes extensions to support SCRAM because
 libcurl was built with libgsasl.
-.IP "GSS-API"
+
+## GSS-API
 GSS-API is supported.
-.IP "HSTS"
+
+## HSTS
 HSTS support is present.
-.IP "HTTP2"
+
+## HTTP2
 HTTP/2 support has been built-in.
-.IP "HTTP3"
+
+## HTTP3
 HTTP/3 support has been built-in.
-.IP "HTTPS-proxy"
+
+## HTTPS-proxy
 This curl is built to support HTTPS proxy.
-.IP "IDN"
+
+## IDN
 This curl supports IDN - international domain names.
-.IP "IPv6"
+
+## IPv6
 You can use IPv6 with this.
-.IP "Kerberos"
+
+## Kerberos
 Kerberos V5 authentication is supported.
-.IP "Largefile"
+
+## Largefile
 This curl supports transfers of large files, files larger than 2GB.
-.IP "libz"
+
+## libz
 Automatic decompression (via gzip, deflate) of compressed files over HTTP is
 supported.
-.IP "MultiSSL"
+
+## MultiSSL
 This curl supports multiple TLS backends.
-.IP "NTLM"
+
+## NTLM
 NTLM authentication is supported.
-.IP "NTLM_WB"
+
+## NTLM_WB
 NTLM delegation to winbind helper is supported.
-.IP "PSL"
+
+## PSL
 PSL is short for Public Suffix List and means that this curl has been built
 with knowledge about "public suffixes".
-.IP "SPNEGO"
+
+## SPNEGO
 SPNEGO authentication is supported.
-.IP "SSL"
+
+## SSL
 SSL versions of various protocols are supported, such as HTTPS, FTPS, POP3S
 and so on.
-.IP "SSPI"
+
+## SSPI
 SSPI is supported.
-.IP "TLS-SRP"
+
+## TLS-SRP
 SRP (Secure Remote Password) authentication is supported for TLS.
-.IP "TrackMemory"
+
+## TrackMemory
 Debug memory tracking is supported.
-.IP "Unicode"
+
+## Unicode
 Unicode support on Windows.
-.IP "UnixSockets"
+
+## UnixSockets
 Unix sockets support is provided.
-.IP "zstd"
+
+## zstd
 Automatic decompression (via zstd) of compressed files over HTTP is supported.
-.RE
-.IP
diff --git a/docs/cmdline-opts/write-out.d b/docs/cmdline-opts/write-out.d
index d21a747dc..5975c8e2d 100644
--- a/docs/cmdline-opts/write-out.d
+++ b/docs/cmdline-opts/write-out.d
@@ -45,25 +45,31 @@ option to properly escape. If this option is used at the command prompt then
 the % cannot be escaped and unintended expansion is possible.
 
 The variables available are:
-.RS
-.IP certs
+
+## certs
 Output the certificate chain with details. Supported only by the OpenSSL,
 GnuTLS, Schannel and Secure Transport backends. (Added in 7.88.0)
-.IP content_type
+
+## content_type
 The Content-Type of the requested document, if there was any.
-.IP errormsg
+
+## errormsg
 The error message. (Added in 7.75.0)
-.IP exitcode
+
+## exitcode
 The numerical exit code of the transfer. (Added in 7.75.0)
-.IP filename_effective
+
+## filename_effective
 The ultimate filename that curl writes out to. This is only meaningful if curl
 is told to write to a file with the --remote-name or --output
 option. It's most useful in combination with the --remote-header-name
 option. (Added in 7.26.0)
-.IP ftp_entry_path
+
+## ftp_entry_path
 The initial path curl ended up in when logging on to the remote FTP
 server. (Added in 7.15.4)
-.IP header_json
+
+## header_json
 A JSON object with all HTTP response headers from the recent transfer. Values
 are provided as arrays, since in the case of multiple headers there can be
 multiple values. (Added in 7.83.0)
@@ -71,157 +77,213 @@ multiple values. (Added in 7.83.0)
 The header names provided in lowercase, listed in order of appearance over the
 wire. Except for duplicated headers. They are grouped on the first occurrence
 of that header, each value is presented in the JSON array.
-.IP http_code
+
+## http_code
 The numerical response code that was found in the last retrieved HTTP(S) or
 FTP(s) transfer.
-.IP http_connect
+
+## http_connect
 The numerical code that was found in the last response (from a proxy) to a
 curl CONNECT request. (Added in 7.12.4)
-.IP http_version
+
+## http_version
 The http version that was effectively used. (Added in 7.50.0)
-.IP json
+
+## json
 A JSON object with all available keys. (Added in 7.70.0)
-.IP local_ip
+
+## local_ip
 The IP address of the local end of the most recently done connection - can be
 either IPv4 or IPv6. (Added in 7.29.0)
-.IP local_port
+
+## local_port
 The local port number of the most recently done connection. (Added in 7.29.0)
-.IP method
+
+## method
 The http method used in the most recent HTTP request. (Added in 7.72.0)
-.IP num_certs
+
+## num_certs
 Number of server certificates received in the TLS handshake. Supported only by
 the OpenSSL, GnuTLS, Schannel and Secure Transport backends.
 (Added in 7.88.0)
-.IP num_connects
+
+## num_connects
 Number of new connects made in the recent transfer. (Added in 7.12.3)
-.IP num_headers
+
+## num_headers
 The number of response headers in the most recent request (restarted at each
 redirect). Note that the status line IS NOT a header. (Added in 7.73.0)
-.IP num_redirects
+
+## num_redirects
 Number of redirects that were followed in the request. (Added in 7.12.3)
-.IP onerror
+
+## onerror
 The rest of the output is only shown if the transfer returned a non-zero error.
 (Added in 7.75.0)
-.IP "proxy_ssl_verify_result"
+
+## "proxy_ssl_verify_result"
 The result of the HTTPS proxy's SSL peer certificate verification that was
 requested. 0 means the verification was successful. (Added in 7.52.0)
-.IP redirect_url
+
+## redirect_url
 When an HTTP request was made without --location to follow redirects (or when
 --max-redirs is met), this variable shows the actual URL a redirect
 *would* have gone to. (Added in 7.18.2)
-.IP referer
+
+## referer
 The Referer: header, if there was any. (Added in 7.76.0)
-.IP remote_ip
+
+## remote_ip
 The remote IP address of the most recently done connection - can be either
 IPv4 or IPv6. (Added in 7.29.0)
-.IP remote_port
+
+## remote_port
 The remote port number of the most recently done connection. (Added in 7.29.0)
-.IP response_code
+
+## response_code
 The numerical response code that was found in the last transfer (formerly
 known as "http_code"). (Added in 7.18.2)
-.IP scheme
+
+## scheme
 The URL scheme (sometimes called protocol) that was effectively used. (Added in 7.52.0)
-.IP size_download
+
+## size_download
 The total amount of bytes that were downloaded. This is the size of the
 body/data that was transferred, excluding headers.
-.IP size_header
+
+## size_header
 The total amount of bytes of the downloaded headers.
-.IP size_request
+
+## size_request
 The total amount of bytes that were sent in the HTTP request.
-.IP size_upload
+
+## size_upload
 The total amount of bytes that were uploaded. This is the size of the
 body/data that was transferred, excluding headers.
-.IP speed_download
+
+## speed_download
 The average download speed that curl measured for the complete download. Bytes
 per second.
-.IP speed_upload
+
+## speed_upload
 The average upload speed that curl measured for the complete upload. Bytes per
 second.
-.IP ssl_verify_result
+
+## ssl_verify_result
 The result of the SSL peer certificate verification that was requested. 0
 means the verification was successful. (Added in 7.19.0)
-.IP stderr
+
+## stderr
 From this point on, the --write-out output is written to standard
 error. (Added in 7.63.0)
-.IP stdout
+
+## stdout
 From this point on, the --write-out output is written to standard output.
 This is the default, but can be used to switch back after switching to stderr.
 (Added in 7.63.0)
-.IP time_appconnect
+
+## time_appconnect
 The time, in seconds, it took from the start until the SSL/SSH/etc
 connect/handshake to the remote host was completed. (Added in 7.19.0)
-.IP time_connect
+
+## time_connect
 The time, in seconds, it took from the start until the TCP connect to the
 remote host (or proxy) was completed.
-.IP time_namelookup
+
+## time_namelookup
 The time, in seconds, it took from the start until the name resolving was
 completed.
-.IP time_pretransfer
+
+## time_pretransfer
 The time, in seconds, it took from the start until the file transfer was just
 about to begin. This includes all pre-transfer commands and negotiations that
 are specific to the particular protocol(s) involved.
-.IP time_redirect
+
+## time_redirect
 The time, in seconds, it took for all redirection steps including name lookup,
 connect, pretransfer and transfer before the final transaction was
 started. time_redirect shows the complete execution time for multiple
 redirections. (Added in 7.12.3)
-.IP time_starttransfer
+
+## time_starttransfer
 The time, in seconds, it took from the start until the first byte is received.
 This includes time_pretransfer and also the time the server needed to calculate
 the result.
-.IP time_total
+
+## time_total
 The total time, in seconds, that the full operation lasted.
-.IP url
+
+## url
 The URL that was fetched. (Added in 7.75.0)
-.IP url.scheme
+
+## url.scheme
 The scheme part of the URL that was fetched. (Added in 8.1.0)
-.IP url.user
+
+## url.user
 The user part of the URL that was fetched. (Added in 8.1.0)
-.IP url.password
+
+## url.password
 The password part of the URL that was fetched. (Added in 8.1.0)
-.IP url.options
+
+## url.options
 The options part of the URL that was fetched. (Added in 8.1.0)
-.IP url.host
+
+## url.host
 The host part of the URL that was fetched. (Added in 8.1.0)
-.IP url.port
+
+## url.port
 The port number of the URL that was fetched. If no port number was specified,
 but the URL scheme is known, that scheme's default port number is
 shown. (Added in 8.1.0)
-.IP url.path
+
+## url.path
 The path part of the URL that was fetched. (Added in 8.1.0)
-.IP url.query
+
+## url.query
 The query part of the URL that was fetched. (Added in 8.1.0)
-.IP url.fragment
+
+## url.fragment
 The fragment part of the URL that was fetched. (Added in 8.1.0)
-.IP url.zoneid
+
+## url.zoneid
 The zone id part of the URL that was fetched. (Added in 8.1.0)
-.IP urle.scheme
+
+## urle.scheme
 The scheme part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.user
+
+## urle.user
 The user part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.password
+
+## urle.password
 The password part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.options
+
+## urle.options
 The options part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.host
+
+## urle.host
 The host part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.port
+
+## urle.port
 The port number of the effective (last) URL that was fetched. If no port
 number was specified, but the URL scheme is known, that scheme's default port
 number is shown. (Added in 8.1.0)
-.IP urle.path
+
+## urle.path
 The path part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.query
+
+## urle.query
 The query part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.fragment
+
+## urle.fragment
 The fragment part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urle.zoneid
+
+## urle.zoneid
 The zone id part of the effective (last) URL that was fetched. (Added in 8.1.0)
-.IP urlnum
+
+## urlnum
 The URL index number of this transfer, 0-indexed. Unglobbed URLs share the
 same index number as the origin globbed URL. (Added in 7.75.0)
-.IP url_effective
+
+## url_effective
 The URL that was fetched last. This is most meaningful if you have told curl
 to follow location: headers.
-.RE
-.IP