Merge "Snap for 11754915 from ff35aa3a94f1d646fe425f05165fdf4559f5aa8f to sdk-release" into sdk-releasesdk-release

89 files changed, 4889 insertions, 468 deletions

diff --git a/original/uapi/asm-arm/asm/unistd-eabi.h b/original/uapi/asm-arm/asm/unistd-eabi.h
index 57ec59c..4c1bd50 100644
--- a/original/uapi/asm-arm/asm/unistd-eabi.h
+++ b/original/uapi/asm-arm/asm/unistd-eabi.h
@@ -410,5 +410,10 @@
 #define __NR_futex_wake (__NR_SYSCALL_BASE + 454)
 #define __NR_futex_wait (__NR_SYSCALL_BASE + 455)
 #define __NR_futex_requeue (__NR_SYSCALL_BASE + 456)
+#define __NR_statmount (__NR_SYSCALL_BASE + 457)
+#define __NR_listmount (__NR_SYSCALL_BASE + 458)
+#define __NR_lsm_get_self_attr (__NR_SYSCALL_BASE + 459)
+#define __NR_lsm_set_self_attr (__NR_SYSCALL_BASE + 460)
+#define __NR_lsm_list_modules (__NR_SYSCALL_BASE + 461)
 
 #endif /* _UAPI_ASM_UNISTD_EABI_H */
diff --git a/original/uapi/asm-arm/asm/unistd-oabi.h b/original/uapi/asm-arm/asm/unistd-oabi.h
index 736f2b1..a85ea39 100644
--- a/original/uapi/asm-arm/asm/unistd-oabi.h
+++ b/original/uapi/asm-arm/asm/unistd-oabi.h
@@ -422,5 +422,10 @@
 #define __NR_futex_wake (__NR_SYSCALL_BASE + 454)
 #define __NR_futex_wait (__NR_SYSCALL_BASE + 455)
 #define __NR_futex_requeue (__NR_SYSCALL_BASE + 456)
+#define __NR_statmount (__NR_SYSCALL_BASE + 457)
+#define __NR_listmount (__NR_SYSCALL_BASE + 458)
+#define __NR_lsm_get_self_attr (__NR_SYSCALL_BASE + 459)
+#define __NR_lsm_set_self_attr (__NR_SYSCALL_BASE + 460)
+#define __NR_lsm_list_modules (__NR_SYSCALL_BASE + 461)
 
 #endif /* _UAPI_ASM_UNISTD_OABI_H */
diff --git a/original/uapi/asm-generic/unistd.h b/original/uapi/asm-generic/unistd.h
index 756b013..75f0096 100644
--- a/original/uapi/asm-generic/unistd.h
+++ b/original/uapi/asm-generic/unistd.h
@@ -829,8 +829,21 @@ __SYSCALL(__NR_futex_wait, sys_futex_wait)
 #define __NR_futex_requeue 456
 __SYSCALL(__NR_futex_requeue, sys_futex_requeue)
 
+#define __NR_statmount   457
+__SYSCALL(__NR_statmount, sys_statmount)
+
+#define __NR_listmount   458
+__SYSCALL(__NR_listmount, sys_listmount)
+
+#define __NR_lsm_get_self_attr 459
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+#define __NR_lsm_set_self_attr 460
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
+#define __NR_lsm_list_modules 461
+__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules)
+
 #undef __NR_syscalls
-#define __NR_syscalls 457
+#define __NR_syscalls 462
 
 /*
  * 32 bit systems traditionally used different
diff --git a/original/uapi/asm-riscv/asm/hwprobe.h b/original/uapi/asm-riscv/asm/hwprobe.h
index b659ffc..9f2a8e3 100644
--- a/original/uapi/asm-riscv/asm/hwprobe.h
+++ b/original/uapi/asm-riscv/asm/hwprobe.h
@@ -30,6 +30,35 @@ struct riscv_hwprobe {
 #define		RISCV_HWPROBE_EXT_ZBB		(1 << 4)
 #define		RISCV_HWPROBE_EXT_ZBS		(1 << 5)
 #define		RISCV_HWPROBE_EXT_ZICBOZ	(1 << 6)
+#define		RISCV_HWPROBE_EXT_ZBC		(1 << 7)
+#define		RISCV_HWPROBE_EXT_ZBKB		(1 << 8)
+#define		RISCV_HWPROBE_EXT_ZBKC		(1 << 9)
+#define		RISCV_HWPROBE_EXT_ZBKX		(1 << 10)
+#define		RISCV_HWPROBE_EXT_ZKND		(1 << 11)
+#define		RISCV_HWPROBE_EXT_ZKNE		(1 << 12)
+#define		RISCV_HWPROBE_EXT_ZKNH		(1 << 13)
+#define		RISCV_HWPROBE_EXT_ZKSED		(1 << 14)
+#define		RISCV_HWPROBE_EXT_ZKSH		(1 << 15)
+#define		RISCV_HWPROBE_EXT_ZKT		(1 << 16)
+#define		RISCV_HWPROBE_EXT_ZVBB		(1 << 17)
+#define		RISCV_HWPROBE_EXT_ZVBC		(1 << 18)
+#define		RISCV_HWPROBE_EXT_ZVKB		(1 << 19)
+#define		RISCV_HWPROBE_EXT_ZVKG		(1 << 20)
+#define		RISCV_HWPROBE_EXT_ZVKNED	(1 << 21)
+#define		RISCV_HWPROBE_EXT_ZVKNHA	(1 << 22)
+#define		RISCV_HWPROBE_EXT_ZVKNHB	(1 << 23)
+#define		RISCV_HWPROBE_EXT_ZVKSED	(1 << 24)
+#define		RISCV_HWPROBE_EXT_ZVKSH		(1 << 25)
+#define		RISCV_HWPROBE_EXT_ZVKT		(1 << 26)
+#define		RISCV_HWPROBE_EXT_ZFH		(1 << 27)
+#define		RISCV_HWPROBE_EXT_ZFHMIN	(1 << 28)
+#define		RISCV_HWPROBE_EXT_ZIHINTNTL	(1 << 29)
+#define		RISCV_HWPROBE_EXT_ZVFH		(1 << 30)
+#define		RISCV_HWPROBE_EXT_ZVFHMIN	(1 << 31)
+#define		RISCV_HWPROBE_EXT_ZFA		(1ULL << 32)
+#define		RISCV_HWPROBE_EXT_ZTSO		(1ULL << 33)
+#define		RISCV_HWPROBE_EXT_ZACAS		(1ULL << 34)
+#define		RISCV_HWPROBE_EXT_ZICOND	(1ULL << 35)
 #define RISCV_HWPROBE_KEY_CPUPERF_0	5
 #define		RISCV_HWPROBE_MISALIGNED_UNKNOWN	(0 << 0)
 #define		RISCV_HWPROBE_MISALIGNED_EMULATED	(1 << 0)
@@ -40,4 +69,7 @@ struct riscv_hwprobe {
 #define RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE	6
 /* Increase RISCV_HWPROBE_MAX_KEY when adding items. */
 
+/* Flags */
+#define RISCV_HWPROBE_WHICH_CPUS	(1 << 0)
+
 #endif
diff --git a/original/uapi/asm-riscv/asm/kvm.h b/original/uapi/asm-riscv/asm/kvm.h
index 60d3b21..7499e88 100644
--- a/original/uapi/asm-riscv/asm/kvm.h
+++ b/original/uapi/asm-riscv/asm/kvm.h
@@ -139,6 +139,33 @@ enum KVM_RISCV_ISA_EXT_ID {
 	KVM_RISCV_ISA_EXT_ZIHPM,
 	KVM_RISCV_ISA_EXT_SMSTATEEN,
 	KVM_RISCV_ISA_EXT_ZICOND,
+	KVM_RISCV_ISA_EXT_ZBC,
+	KVM_RISCV_ISA_EXT_ZBKB,
+	KVM_RISCV_ISA_EXT_ZBKC,
+	KVM_RISCV_ISA_EXT_ZBKX,
+	KVM_RISCV_ISA_EXT_ZKND,
+	KVM_RISCV_ISA_EXT_ZKNE,
+	KVM_RISCV_ISA_EXT_ZKNH,
+	KVM_RISCV_ISA_EXT_ZKR,
+	KVM_RISCV_ISA_EXT_ZKSED,
+	KVM_RISCV_ISA_EXT_ZKSH,
+	KVM_RISCV_ISA_EXT_ZKT,
+	KVM_RISCV_ISA_EXT_ZVBB,
+	KVM_RISCV_ISA_EXT_ZVBC,
+	KVM_RISCV_ISA_EXT_ZVKB,
+	KVM_RISCV_ISA_EXT_ZVKG,
+	KVM_RISCV_ISA_EXT_ZVKNED,
+	KVM_RISCV_ISA_EXT_ZVKNHA,
+	KVM_RISCV_ISA_EXT_ZVKNHB,
+	KVM_RISCV_ISA_EXT_ZVKSED,
+	KVM_RISCV_ISA_EXT_ZVKSH,
+	KVM_RISCV_ISA_EXT_ZVKT,
+	KVM_RISCV_ISA_EXT_ZFH,
+	KVM_RISCV_ISA_EXT_ZFHMIN,
+	KVM_RISCV_ISA_EXT_ZIHINTNTL,
+	KVM_RISCV_ISA_EXT_ZVFH,
+	KVM_RISCV_ISA_EXT_ZVFHMIN,
+	KVM_RISCV_ISA_EXT_ZFA,
 	KVM_RISCV_ISA_EXT_MAX,
 };
 
@@ -157,9 +184,16 @@ enum KVM_RISCV_SBI_EXT_ID {
 	KVM_RISCV_SBI_EXT_EXPERIMENTAL,
 	KVM_RISCV_SBI_EXT_VENDOR,
 	KVM_RISCV_SBI_EXT_DBCN,
+	KVM_RISCV_SBI_EXT_STA,
 	KVM_RISCV_SBI_EXT_MAX,
 };
 
+/* SBI STA extension registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
+struct kvm_riscv_sbi_sta {
+	unsigned long shmem_lo;
+	unsigned long shmem_hi;
+};
+
 /* Possible states for kvm_riscv_timer */
 #define KVM_RISCV_TIMER_STATE_OFF	0
 #define KVM_RISCV_TIMER_STATE_ON	1
@@ -241,6 +275,12 @@ enum KVM_RISCV_SBI_EXT_ID {
 #define KVM_REG_RISCV_VECTOR_REG(n)	\
 		((n) + sizeof(struct __riscv_v_ext_state) / sizeof(unsigned long))
 
+/* Registers for specific SBI extensions are mapped as type 10 */
+#define KVM_REG_RISCV_SBI_STATE		(0x0a << KVM_REG_RISCV_TYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA		(0x0 << KVM_REG_RISCV_SUBTYPE_SHIFT)
+#define KVM_REG_RISCV_SBI_STA_REG(name)		\
+		(offsetof(struct kvm_riscv_sbi_sta, name) / sizeof(unsigned long))
+
 /* Device Control API: RISC-V AIA */
 #define KVM_DEV_RISCV_APLIC_ALIGN		0x1000
 #define KVM_DEV_RISCV_APLIC_SIZE		0x4000
diff --git a/original/uapi/asm-x86/asm/amd_hsmp.h b/original/uapi/asm-x86/asm/amd_hsmp.h
index fce2268..e5d182c 100644
--- a/original/uapi/asm-x86/asm/amd_hsmp.h
+++ b/original/uapi/asm-x86/asm/amd_hsmp.h
@@ -238,7 +238,7 @@ static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
 	/*
 	 * HSMP_GET_DIMM_THERMAL, num_args = 1, response_sz = 1
 	 * input: args[0] = DIMM address[7:0]
-	 * output: args[0] = temperature in degree celcius[31:21] + update rate in ms[16:8] +
+	 * output: args[0] = temperature in degree celsius[31:21] + update rate in ms[16:8] +
 	 * DIMM address[7:0]
 	 */
 	{1, 1, HSMP_GET},
diff --git a/original/uapi/asm-x86/asm/kvm.h b/original/uapi/asm-x86/asm/kvm.h
index 1a6a1f9..a448d09 100644
--- a/original/uapi/asm-x86/asm/kvm.h
+++ b/original/uapi/asm-x86/asm/kvm.h
@@ -562,4 +562,7 @@ struct kvm_pmu_event_filter {
 /* x86-specific KVM_EXIT_HYPERCALL flags. */
 #define KVM_EXIT_HYPERCALL_LONG_MODE	BIT(0)
 
+#define KVM_X86_DEFAULT_VM	0
+#define KVM_X86_SW_PROTECTED_VM	1
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/original/uapi/asm-x86/asm/signal.h b/original/uapi/asm-x86/asm/signal.h
index 777c3a0..f777346 100644
--- a/original/uapi/asm-x86/asm/signal.h
+++ b/original/uapi/asm-x86/asm/signal.h
@@ -4,7 +4,6 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
-#include <linux/time.h>
 #include <linux/compiler.h>
 
 /* Avoid too many header ordering problems.  */
diff --git a/original/uapi/asm-x86/asm/unistd_32.h b/original/uapi/asm-x86/asm/unistd_32.h
index 1389e8b..8621e6e 100644
--- a/original/uapi/asm-x86/asm/unistd_32.h
+++ b/original/uapi/asm-x86/asm/unistd_32.h
@@ -447,9 +447,14 @@
 #define __NR_futex_wake 454
 #define __NR_futex_wait 455
 #define __NR_futex_requeue 456
+#define __NR_statmount 457
+#define __NR_listmount 458
+#define __NR_lsm_get_self_attr 459
+#define __NR_lsm_set_self_attr 460
+#define __NR_lsm_list_modules 461
 
 #ifdef __KERNEL__
-#define __NR_syscalls 457
+#define __NR_syscalls 462
 #endif
 
 #endif /* _UAPI_ASM_UNISTD_32_H */
diff --git a/original/uapi/asm-x86/asm/unistd_64.h b/original/uapi/asm-x86/asm/unistd_64.h
index c6023bf..1073959 100644
--- a/original/uapi/asm-x86/asm/unistd_64.h
+++ b/original/uapi/asm-x86/asm/unistd_64.h
@@ -369,9 +369,14 @@
 #define __NR_futex_wake 454
 #define __NR_futex_wait 455
 #define __NR_futex_requeue 456
+#define __NR_statmount 457
+#define __NR_listmount 458
+#define __NR_lsm_get_self_attr 459
+#define __NR_lsm_set_self_attr 460
+#define __NR_lsm_list_modules 461
 
 #ifdef __KERNEL__
-#define __NR_syscalls 457
+#define __NR_syscalls 462
 #endif
 
 #endif /* _UAPI_ASM_UNISTD_64_H */
diff --git a/original/uapi/asm-x86/asm/unistd_x32.h b/original/uapi/asm-x86/asm/unistd_x32.h
index 599bc5a..81dcb36 100644
--- a/original/uapi/asm-x86/asm/unistd_x32.h
+++ b/original/uapi/asm-x86/asm/unistd_x32.h
@@ -321,6 +321,11 @@
 #define __NR_futex_wake (__X32_SYSCALL_BIT + 454)
 #define __NR_futex_wait (__X32_SYSCALL_BIT + 455)
 #define __NR_futex_requeue (__X32_SYSCALL_BIT + 456)
+#define __NR_statmount (__X32_SYSCALL_BIT + 457)
+#define __NR_listmount (__X32_SYSCALL_BIT + 458)
+#define __NR_lsm_get_self_attr (__X32_SYSCALL_BIT + 459)
+#define __NR_lsm_set_self_attr (__X32_SYSCALL_BIT + 460)
+#define __NR_lsm_list_modules (__X32_SYSCALL_BIT + 461)
 #define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
 #define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
 #define __NR_ioctl (__X32_SYSCALL_BIT + 514)
diff --git a/original/uapi/drm/drm.h b/original/uapi/drm/drm.h
index de72356..1612281 100644
--- a/original/uapi/drm/drm.h
+++ b/original/uapi/drm/drm.h
@@ -713,7 +713,8 @@ struct drm_gem_open {
 /**
  * DRM_CAP_ASYNC_PAGE_FLIP
  *
- * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC.
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for legacy
+ * page-flips.
  */
 #define DRM_CAP_ASYNC_PAGE_FLIP		0x7
 /**
@@ -773,6 +774,13 @@ struct drm_gem_open {
  * :ref:`drm_sync_objects`.
  */
 #define DRM_CAP_SYNCOBJ_TIMELINE	0x14
+/**
+ * DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for atomic
+ * commits.
+ */
+#define DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP	0x15
 
 /* DRM_IOCTL_GET_CAP ioctl argument type */
 struct drm_get_cap {
@@ -842,6 +850,31 @@ struct drm_get_cap {
  */
 #define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
 
+/**
+ * DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT
+ *
+ * Drivers for para-virtualized hardware (e.g. vmwgfx, qxl, virtio and
+ * virtualbox) have additional restrictions for cursor planes (thus
+ * making cursor planes on those drivers not truly universal,) e.g.
+ * they need cursor planes to act like one would expect from a mouse
+ * cursor and have correctly set hotspot properties.
+ * If this client cap is not set the DRM core will hide cursor plane on
+ * those virtualized drivers because not setting it implies that the
+ * client is not capable of dealing with those extra restictions.
+ * Clients which do set cursor hotspot and treat the cursor plane
+ * like a mouse cursor should set this property.
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * Setting this property on drivers which do not special case
+ * cursor planes (i.e. non-virtualized drivers) will return
+ * EOPNOTSUPP, which can be used by userspace to gauge
+ * requirements of the hardware/drivers they're running on.
+ *
+ * This capability is always supported for atomic-capable virtualized
+ * drivers starting from kernel version 6.6.
+ */
+#define DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT	6
+
 /* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
 struct drm_set_client_cap {
 	__u64 capability;
@@ -893,6 +926,7 @@ struct drm_syncobj_transfer {
 #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
 #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
 #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE (1 << 2) /* wait for time point to become available */
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE (1 << 3) /* set fence deadline to deadline_nsec */
 struct drm_syncobj_wait {
 	__u64 handles;
 	/* absolute timeout */
@@ -901,6 +935,14 @@ struct drm_syncobj_wait {
 	__u32 flags;
 	__u32 first_signaled; /* only valid when not waiting all */
 	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
 };
 
 struct drm_syncobj_timeline_wait {
@@ -913,6 +955,14 @@ struct drm_syncobj_timeline_wait {
 	__u32 flags;
 	__u32 first_signaled; /* only valid when not waiting all */
 	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
 };
 
 /**
@@ -1218,6 +1268,26 @@ extern "C" {
 
 #define DRM_IOCTL_SYNCOBJ_EVENTFD	DRM_IOWR(0xCF, struct drm_syncobj_eventfd)
 
+/**
+ * DRM_IOCTL_MODE_CLOSEFB - Close a framebuffer.
+ *
+ * This closes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * This IOCTL is similar to &DRM_IOCTL_MODE_RMFB, except it doesn't disable
+ * planes and CRTCs. As long as the framebuffer is used by a plane, it's kept
+ * alive. When the plane no longer uses the framebuffer (because the
+ * framebuffer is replaced with another one, or the plane is disabled), the
+ * framebuffer is cleaned up.
+ *
+ * This is useful to implement flicker-free transitions between two processes.
+ *
+ * Depending on the threat model, user-space may want to ensure that the
+ * framebuffer doesn't expose any sensitive user information: closed
+ * framebuffers attached to a plane can be read back by the next DRM master.
+ */
+#define DRM_IOCTL_MODE_CLOSEFB		DRM_IOWR(0xD0, struct drm_mode_closefb)
+
 /*
  * Device specific ioctls should only be in their respective headers
  * The device specific ioctl range is from 0x40 to 0x9f.
diff --git a/original/uapi/drm/drm_fourcc.h b/original/uapi/drm/drm_fourcc.h
index 3151f1f..84d502e 100644
--- a/original/uapi/drm/drm_fourcc.h
+++ b/original/uapi/drm/drm_fourcc.h
@@ -54,7 +54,7 @@ extern "C" {
  * Format modifiers may change any property of the buffer, including the number
  * of planes and/or the required allocation size. Format modifiers are
  * vendor-namespaced, and as such the relationship between a fourcc code and a
- * modifier is specific to the modifer being used. For example, some modifiers
+ * modifier is specific to the modifier being used. For example, some modifiers
  * may preserve meaning - such as number of planes - from the fourcc code,
  * whereas others may not.
  *
@@ -79,7 +79,7 @@ extern "C" {
  *   format.
  * - Higher-level programs interfacing with KMS/GBM/EGL/Vulkan/etc: these users
  *   see modifiers as opaque tokens they can check for equality and intersect.
- *   These users musn't need to know to reason about the modifier value
+ *   These users mustn't need to know to reason about the modifier value
  *   (i.e. they are not expected to extract information out of the modifier).
  *
  * Vendors should document their modifier usage in as much detail as
@@ -540,7 +540,7 @@ extern "C" {
  * This is a tiled layout using 4Kb tiles in row-major layout.
  * Within the tile pixels are laid out in 16 256 byte units / sub-tiles which
  * are arranged in four groups (two wide, two high) with column-major layout.
- * Each group therefore consits out of four 256 byte units, which are also laid
+ * Each group therefore consists out of four 256 byte units, which are also laid
  * out as 2x2 column-major.
  * 256 byte units are made out of four 64 byte blocks of pixels, producing
  * either a square block or a 2:1 unit.
@@ -1103,7 +1103,7 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier)
  */
 
 /*
- * The top 4 bits (out of the 56 bits alloted for specifying vendor specific
+ * The top 4 bits (out of the 56 bits allotted for specifying vendor specific
  * modifiers) denote the category for modifiers. Currently we have three
  * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of
  * sixteen different categories.
@@ -1419,7 +1419,7 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier)
  * Amlogic FBC Memory Saving mode
  *
  * Indicates the storage is packed when pixel size is multiple of word
- * boudaries, i.e. 8bit should be stored in this mode to save allocation
+ * boundaries, i.e. 8bit should be stored in this mode to save allocation
  * memory.
  *
  * This mode reduces body layout to 3072 bytes per 64x32 superblock with
diff --git a/original/uapi/drm/drm_mode.h b/original/uapi/drm/drm_mode.h
index 128d091..7040e7e 100644
--- a/original/uapi/drm/drm_mode.h
+++ b/original/uapi/drm/drm_mode.h
@@ -36,10 +36,10 @@ extern "C" {
 /**
  * DOC: overview
  *
- * DRM exposes many UAPI and structure definition to have a consistent
- * and standardized interface with user.
+ * DRM exposes many UAPI and structure definitions to have a consistent
+ * and standardized interface with users.
  * Userspace can refer to these structure definitions and UAPI formats
- * to communicate to driver
+ * to communicate to drivers.
  */
 
 #define DRM_CONNECTOR_NAME_LEN	32
@@ -540,7 +540,7 @@ struct drm_mode_get_connector {
 /* the PROP_ATOMIC flag is used to hide properties from userspace that
  * is not aware of atomic properties.  This is mostly to work around
  * older userspace (DDX drivers) that read/write each prop they find,
- * witout being aware that this could be triggering a lengthy modeset.
+ * without being aware that this could be triggering a lengthy modeset.
  */
 #define DRM_MODE_PROP_ATOMIC        0x80000000
 
@@ -664,7 +664,7 @@ struct drm_mode_fb_cmd {
 };
 
 #define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
-#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifer[] */
+#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifier[] */
 
 /**
  * struct drm_mode_fb_cmd2 - Frame-buffer metadata.
@@ -846,6 +846,14 @@ struct drm_color_ctm {
 	__u64 matrix[9];
 };
 
+struct drm_color_ctm_3x4 {
+	/*
+	 * Conversion matrix with 3x4 dimensions in S31.32 sign-magnitude
+	 * (not two's complement!) format.
+	 */
+	__u64 matrix[12];
+};
+
 struct drm_color_lut {
 	/*
 	 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
@@ -881,8 +889,8 @@ struct hdr_metadata_infoframe {
 	 * These are coded as unsigned 16-bit values in units of
 	 * 0.00002, where 0x0000 represents zero and 0xC350
 	 * represents 1.0000.
-	 * @display_primaries.x: X cordinate of color primary.
-	 * @display_primaries.y: Y cordinate of color primary.
+	 * @display_primaries.x: X coordinate of color primary.
+	 * @display_primaries.y: Y coordinate of color primary.
 	 */
 	struct {
 		__u16 x, y;
@@ -892,8 +900,8 @@ struct hdr_metadata_infoframe {
 	 * These are coded as unsigned 16-bit values in units of
 	 * 0.00002, where 0x0000 represents zero and 0xC350
 	 * represents 1.0000.
-	 * @white_point.x: X cordinate of whitepoint of color primary.
-	 * @white_point.y: Y cordinate of whitepoint of color primary.
+	 * @white_point.x: X coordinate of whitepoint of color primary.
+	 * @white_point.y: Y coordinate of whitepoint of color primary.
 	 */
 	struct {
 		__u16 x, y;
@@ -957,6 +965,15 @@ struct hdr_output_metadata {
  * Request that the page-flip is performed as soon as possible, ie. with no
  * delay due to waiting for vblank. This may cause tearing to be visible on
  * the screen.
+ *
+ * When used with atomic uAPI, the driver will return an error if the hardware
+ * doesn't support performing an asynchronous page-flip for this update.
+ * User-space should handle this, e.g. by falling back to a regular page-flip.
+ *
+ * Note, some hardware might need to perform one last synchronous page-flip
+ * before being able to switch to asynchronous page-flips. As an exception,
+ * the driver will return success even though that first page-flip is not
+ * asynchronous.
  */
 #define DRM_MODE_PAGE_FLIP_ASYNC 0x02
 #define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4
@@ -1323,6 +1340,16 @@ struct drm_mode_rect {
 	__s32 y2;
 };
 
+/**
+ * struct drm_mode_closefb
+ * @fb_id: Framebuffer ID.
+ * @pad: Must be zero.
+ */
+struct drm_mode_closefb {
+	__u32 fb_id;
+	__u32 pad;
+};
+
 #if defined(__cplusplus)
 }
 #endif
diff --git a/original/uapi/drm/habanalabs_accel.h b/original/uapi/drm/habanalabs_accel.h
index 347c7b6..a512dc4 100644
--- a/original/uapi/drm/habanalabs_accel.h
+++ b/original/uapi/drm/habanalabs_accel.h
@@ -846,6 +846,7 @@ enum hl_server_type {
 #define HL_INFO_HW_ERR_EVENT			36
 #define HL_INFO_FW_ERR_EVENT			37
 #define HL_INFO_USER_ENGINE_ERR_EVENT		38
+#define HL_INFO_DEV_SIGNED			40
 
 #define HL_INFO_VERSION_MAX_LEN			128
 #define HL_INFO_CARD_NAME_MAX_LEN		16
@@ -1256,6 +1257,7 @@ struct hl_info_dev_memalloc_page_sizes {
 #define SEC_SIGNATURE_BUF_SZ	255	/* (256 - 1) 1 byte used for size */
 #define SEC_PUB_DATA_BUF_SZ	510	/* (512 - 2) 2 bytes used for size */
 #define SEC_CERTIFICATE_BUF_SZ	2046	/* (2048 - 2) 2 bytes used for size */
+#define SEC_DEV_INFO_BUF_SZ	5120
 
 /*
  * struct hl_info_sec_attest - attestation report of the boot
@@ -1290,6 +1292,32 @@ struct hl_info_sec_attest {
 	__u8 pad0[2];
 };
 
+/*
+ * struct hl_info_signed - device information signed by a secured device.
+ * @nonce: number only used once. random number provided by host. this also passed to the quote
+ *         command as a qualifying data.
+ * @pub_data_len: length of the public data (bytes)
+ * @certificate_len: length of the certificate (bytes)
+ * @info_sig_len: length of the attestation signature (bytes)
+ * @public_data: public key info signed info data (outPublic + name + qualifiedName)
+ * @certificate: certificate for the signing key
+ * @info_sig: signature of the info + nonce data.
+ * @dev_info_len: length of device info (bytes)
+ * @dev_info: device info as byte array.
+ */
+struct hl_info_signed {
+	__u32 nonce;
+	__u16 pub_data_len;
+	__u16 certificate_len;
+	__u8 info_sig_len;
+	__u8 public_data[SEC_PUB_DATA_BUF_SZ];
+	__u8 certificate[SEC_CERTIFICATE_BUF_SZ];
+	__u8 info_sig[SEC_SIGNATURE_BUF_SZ];
+	__u16 dev_info_len;
+	__u8 dev_info[SEC_DEV_INFO_BUF_SZ];
+	__u8 pad[2];
+};
+
 /**
  * struct hl_page_fault_info - page fault information.
  * @timestamp: timestamp of page fault.
diff --git a/original/uapi/drm/i915_drm.h b/original/uapi/drm/i915_drm.h
index 218edb0..fd4f957 100644
--- a/original/uapi/drm/i915_drm.h
+++ b/original/uapi/drm/i915_drm.h
@@ -693,7 +693,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_EXEC_FENCE	 44
 
 /* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture
- * user specified bufffers for post-mortem debugging of GPU hangs. See
+ * user-specified buffers for post-mortem debugging of GPU hangs. See
  * EXEC_OBJECT_CAPTURE.
  */
 #define I915_PARAM_HAS_EXEC_CAPTURE	 45
@@ -1606,7 +1606,7 @@ struct drm_i915_gem_busy {
 	 * is accurate.
 	 *
 	 * The returned dword is split into two fields to indicate both
-	 * the engine classess on which the object is being read, and the
+	 * the engine classes on which the object is being read, and the
 	 * engine class on which it is currently being written (if any).
 	 *
 	 * The low word (bits 0:15) indicate if the object is being written
@@ -1815,7 +1815,7 @@ struct drm_i915_gem_madvise {
 	__u32 handle;
 
 	/* Advice: either the buffer will be needed again in the near future,
-	 *         or wont be and could be discarded under memory pressure.
+	 *         or won't be and could be discarded under memory pressure.
 	 */
 	__u32 madv;
 
@@ -3246,7 +3246,7 @@ struct drm_i915_query_topology_info {
  * 	// enough to hold our array of engines. The kernel will fill out the
  * 	// item.length for us, which is the number of bytes we need.
  * 	//
- * 	// Alternatively a large buffer can be allocated straight away enabling
+ *	// Alternatively a large buffer can be allocated straightaway enabling
  * 	// querying in one pass, in which case item.length should contain the
  * 	// length of the provided buffer.
  * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
@@ -3256,7 +3256,7 @@ struct drm_i915_query_topology_info {
  * 	// Now that we allocated the required number of bytes, we call the ioctl
  * 	// again, this time with the data_ptr pointing to our newly allocated
  * 	// blob, which the kernel can then populate with info on all engines.
- * 	item.data_ptr = (uintptr_t)&info,
+ *	item.data_ptr = (uintptr_t)&info;
  *
  * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
  * 	if (err) ...
@@ -3286,7 +3286,7 @@ struct drm_i915_query_topology_info {
 /**
  * struct drm_i915_engine_info
  *
- * Describes one engine and it's capabilities as known to the driver.
+ * Describes one engine and its capabilities as known to the driver.
  */
 struct drm_i915_engine_info {
 	/** @engine: Engine class and instance. */
diff --git a/original/uapi/drm/ivpu_accel.h b/original/uapi/drm/ivpu_accel.h
index 262db0c..19a1346 100644
--- a/original/uapi/drm/ivpu_accel.h
+++ b/original/uapi/drm/ivpu_accel.h
@@ -53,7 +53,7 @@ extern "C" {
 #define DRM_IVPU_PARAM_CORE_CLOCK_RATE	    3
 #define DRM_IVPU_PARAM_NUM_CONTEXTS	    4
 #define DRM_IVPU_PARAM_CONTEXT_BASE_ADDRESS 5
-#define DRM_IVPU_PARAM_CONTEXT_PRIORITY	    6
+#define DRM_IVPU_PARAM_CONTEXT_PRIORITY	    6 /* Deprecated */
 #define DRM_IVPU_PARAM_CONTEXT_ID	    7
 #define DRM_IVPU_PARAM_FW_API_VERSION	    8
 #define DRM_IVPU_PARAM_ENGINE_HEARTBEAT	    9
@@ -64,11 +64,18 @@ extern "C" {
 
 #define DRM_IVPU_PLATFORM_TYPE_SILICON	    0
 
+/* Deprecated, use DRM_IVPU_JOB_PRIORITY */
 #define DRM_IVPU_CONTEXT_PRIORITY_IDLE	    0
 #define DRM_IVPU_CONTEXT_PRIORITY_NORMAL    1
 #define DRM_IVPU_CONTEXT_PRIORITY_FOCUS	    2
 #define DRM_IVPU_CONTEXT_PRIORITY_REALTIME  3
 
+#define DRM_IVPU_JOB_PRIORITY_DEFAULT  0
+#define DRM_IVPU_JOB_PRIORITY_IDLE     1
+#define DRM_IVPU_JOB_PRIORITY_NORMAL   2
+#define DRM_IVPU_JOB_PRIORITY_FOCUS    3
+#define DRM_IVPU_JOB_PRIORITY_REALTIME 4
+
 /**
  * DRM_IVPU_CAP_METRIC_STREAMER
  *
@@ -112,10 +119,6 @@ struct drm_ivpu_param {
 	 * %DRM_IVPU_PARAM_CONTEXT_BASE_ADDRESS:
 	 * Lowest VPU virtual address available in the current context (read-only)
 	 *
-	 * %DRM_IVPU_PARAM_CONTEXT_PRIORITY:
-	 * Value of current context scheduling priority (read-write).
-	 * See DRM_IVPU_CONTEXT_PRIORITY_* for possible values.
-	 *
 	 * %DRM_IVPU_PARAM_CONTEXT_ID:
 	 * Current context ID, always greater than 0 (read-only)
 	 *
@@ -196,7 +199,7 @@ struct drm_ivpu_bo_create {
 	 *
 	 * %DRM_IVPU_BO_UNCACHED:
 	 *
-	 * Allocated BO will not be cached on host side nor snooped on the VPU side.
+	 * Not supported. Use DRM_IVPU_BO_WC instead.
 	 *
 	 * %DRM_IVPU_BO_WC:
 	 *
@@ -286,10 +289,23 @@ struct drm_ivpu_submit {
 	 * to be executed. The offset has to be 8-byte aligned.
 	 */
 	__u32 commands_offset;
+
+	/**
+	 * @priority:
+	 *
+	 * Priority to be set for related job command queue, can be one of the following:
+	 * %DRM_IVPU_JOB_PRIORITY_DEFAULT
+	 * %DRM_IVPU_JOB_PRIORITY_IDLE
+	 * %DRM_IVPU_JOB_PRIORITY_NORMAL
+	 * %DRM_IVPU_JOB_PRIORITY_FOCUS
+	 * %DRM_IVPU_JOB_PRIORITY_REALTIME
+	 */
+	__u32 priority;
 };
 
 /* drm_ivpu_bo_wait job status codes */
 #define DRM_IVPU_JOB_STATUS_SUCCESS 0
+#define DRM_IVPU_JOB_STATUS_ABORTED 256
 
 /**
  * struct drm_ivpu_bo_wait - Wait for BO to become inactive
diff --git a/original/uapi/drm/msm_drm.h b/original/uapi/drm/msm_drm.h
index 6c34272..d8a6b34 100644
--- a/original/uapi/drm/msm_drm.h
+++ b/original/uapi/drm/msm_drm.h
@@ -86,6 +86,7 @@ struct drm_msm_timespec {
 #define MSM_PARAM_CMDLINE    0x0d  /* WO: override for task cmdline */
 #define MSM_PARAM_VA_START   0x0e  /* RO: start of valid GPU iova range */
 #define MSM_PARAM_VA_SIZE    0x0f  /* RO: size of valid GPU iova range (bytes) */
+#define MSM_PARAM_HIGHEST_BANK_BIT 0x10 /* RO */
 
 /* For backwards compat.  The original support for preemption was based on
  * a single ring per priority level so # of priority levels equals the #
@@ -139,6 +140,8 @@ struct drm_msm_gem_new {
 #define MSM_INFO_GET_NAME	0x03   /* get debug name, returned by pointer */
 #define MSM_INFO_SET_IOVA	0x04   /* set the iova, passed by value */
 #define MSM_INFO_GET_FLAGS	0x05   /* get the MSM_BO_x flags */
+#define MSM_INFO_SET_METADATA	0x06   /* set userspace metadata */
+#define MSM_INFO_GET_METADATA	0x07   /* get userspace metadata */
 
 struct drm_msm_gem_info {
 	__u32 handle;         /* in */
diff --git a/original/uapi/drm/nouveau_drm.h b/original/uapi/drm/nouveau_drm.h
index 0bade15..77d7ff0 100644
--- a/original/uapi/drm/nouveau_drm.h
+++ b/original/uapi/drm/nouveau_drm.h
@@ -54,6 +54,20 @@ extern "C" {
  */
 #define NOUVEAU_GETPARAM_EXEC_PUSH_MAX   17
 
+/*
+ * NOUVEAU_GETPARAM_VRAM_BAR_SIZE - query bar size
+ *
+ * Query the VRAM BAR size.
+ */
+#define NOUVEAU_GETPARAM_VRAM_BAR_SIZE 18
+
+/*
+ * NOUVEAU_GETPARAM_VRAM_USED
+ *
+ * Get remaining VRAM size.
+ */
+#define NOUVEAU_GETPARAM_VRAM_USED 19
+
 struct drm_nouveau_getparam {
 	__u64 param;
 	__u64 value;
diff --git a/original/uapi/drm/pvr_drm.h b/original/uapi/drm/pvr_drm.h
new file mode 100644
index 0000000..ccf6c21
--- /dev/null
+++ b/original/uapi/drm/pvr_drm.h
@@ -0,0 +1,1295 @@
+/* SPDX-License-Identifier: (GPL-2.0-only WITH Linux-syscall-note) OR MIT */
+/* Copyright (c) 2023 Imagination Technologies Ltd. */
+
+#ifndef PVR_DRM_UAPI_H
+#define PVR_DRM_UAPI_H
+
+#include "drm.h"
+
+#include <linux/const.h>
+#include <linux/types.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/**
+ * DOC: PowerVR UAPI
+ *
+ * The PowerVR IOCTL argument structs have a few limitations in place, in
+ * addition to the standard kernel restrictions:
+ *
+ *  - All members must be type-aligned.
+ *  - The overall struct must be padded to 64-bit alignment.
+ *  - Explicit padding is almost always required. This takes the form of
+ *    ``_padding_[x]`` members of sufficient size to pad to the next power-of-two
+ *    alignment, where [x] is the offset into the struct in hexadecimal. Arrays
+ *    are never used for alignment. Padding fields must be zeroed; this is
+ *    always checked.
+ *  - Unions may only appear as the last member of a struct.
+ *  - Individual union members may grow in the future. The space between the
+ *    end of a union member and the end of its containing union is considered
+ *    "implicit padding" and must be zeroed. This is always checked.
+ *
+ * In addition to the IOCTL argument structs, the PowerVR UAPI makes use of
+ * DEV_QUERY argument structs. These are used to fetch information about the
+ * device and runtime. These structs are subject to the same rules set out
+ * above.
+ */
+
+/**
+ * struct drm_pvr_obj_array - Container used to pass arrays of objects
+ *
+ * It is not unusual to have to extend objects to pass new parameters, and the DRM
+ * ioctl infrastructure is supporting that by padding ioctl arguments with zeros
+ * when the data passed by userspace is smaller than the struct defined in the
+ * drm_ioctl_desc, thus keeping things backward compatible. This type is just
+ * applying the same concepts to indirect objects passed through arrays referenced
+ * from the main ioctl arguments structure: the stride basically defines the size
+ * of the object passed by userspace, which allows the kernel driver to pad with
+ * zeros when it's smaller than the size of the object it expects.
+ *
+ * Use ``DRM_PVR_OBJ_ARRAY()`` to fill object array fields, unless you
+ * have a very good reason not to.
+ */
+struct drm_pvr_obj_array {
+	/** @stride: Stride of object struct. Used for versioning. */
+	__u32 stride;
+
+	/** @count: Number of objects in the array. */
+	__u32 count;
+
+	/** @array: User pointer to an array of objects. */
+	__u64 array;
+};
+
+/**
+ * DRM_PVR_OBJ_ARRAY() - Helper macro for filling &struct drm_pvr_obj_array.
+ * @cnt: Number of elements pointed to py @ptr.
+ * @ptr: Pointer to start of a C array.
+ *
+ * Return: Literal of type &struct drm_pvr_obj_array.
+ */
+#define DRM_PVR_OBJ_ARRAY(cnt, ptr) \
+	{ .stride = sizeof((ptr)[0]), .count = (cnt), .array = (__u64)(uintptr_t)(ptr) }
+
+/**
+ * DOC: PowerVR IOCTL interface
+ */
+
+/**
+ * PVR_IOCTL() - Build a PowerVR IOCTL number
+ * @_ioctl: An incrementing id for this IOCTL. Added to %DRM_COMMAND_BASE.
+ * @_mode: Must be one of %DRM_IOR, %DRM_IOW or %DRM_IOWR.
+ * @_data: The type of the args struct passed by this IOCTL.
+ *
+ * The struct referred to by @_data must have a ``drm_pvr_ioctl_`` prefix and an
+ * ``_args suffix``. They are therefore omitted from @_data.
+ *
+ * This should only be used to build the constants described below; it should
+ * never be used to call an IOCTL directly.
+ *
+ * Return: An IOCTL number to be passed to ioctl() from userspace.
+ */
+#define PVR_IOCTL(_ioctl, _mode, _data) \
+	_mode(DRM_COMMAND_BASE + (_ioctl), struct drm_pvr_ioctl_##_data##_args)
+
+#define DRM_IOCTL_PVR_DEV_QUERY PVR_IOCTL(0x00, DRM_IOWR, dev_query)
+#define DRM_IOCTL_PVR_CREATE_BO PVR_IOCTL(0x01, DRM_IOWR, create_bo)
+#define DRM_IOCTL_PVR_GET_BO_MMAP_OFFSET PVR_IOCTL(0x02, DRM_IOWR, get_bo_mmap_offset)
+#define DRM_IOCTL_PVR_CREATE_VM_CONTEXT PVR_IOCTL(0x03, DRM_IOWR, create_vm_context)
+#define DRM_IOCTL_PVR_DESTROY_VM_CONTEXT PVR_IOCTL(0x04, DRM_IOW, destroy_vm_context)
+#define DRM_IOCTL_PVR_VM_MAP PVR_IOCTL(0x05, DRM_IOW, vm_map)
+#define DRM_IOCTL_PVR_VM_UNMAP PVR_IOCTL(0x06, DRM_IOW, vm_unmap)
+#define DRM_IOCTL_PVR_CREATE_CONTEXT PVR_IOCTL(0x07, DRM_IOWR, create_context)
+#define DRM_IOCTL_PVR_DESTROY_CONTEXT PVR_IOCTL(0x08, DRM_IOW, destroy_context)
+#define DRM_IOCTL_PVR_CREATE_FREE_LIST PVR_IOCTL(0x09, DRM_IOWR, create_free_list)
+#define DRM_IOCTL_PVR_DESTROY_FREE_LIST PVR_IOCTL(0x0a, DRM_IOW, destroy_free_list)
+#define DRM_IOCTL_PVR_CREATE_HWRT_DATASET PVR_IOCTL(0x0b, DRM_IOWR, create_hwrt_dataset)
+#define DRM_IOCTL_PVR_DESTROY_HWRT_DATASET PVR_IOCTL(0x0c, DRM_IOW, destroy_hwrt_dataset)
+#define DRM_IOCTL_PVR_SUBMIT_JOBS PVR_IOCTL(0x0d, DRM_IOW, submit_jobs)
+
+/**
+ * DOC: PowerVR IOCTL DEV_QUERY interface
+ */
+
+/**
+ * struct drm_pvr_dev_query_gpu_info - Container used to fetch information about
+ * the graphics processor.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_QUERY_GPU_INFO_GET.
+ */
+struct drm_pvr_dev_query_gpu_info {
+	/**
+	 * @gpu_id: GPU identifier.
+	 *
+	 * For all currently supported GPUs this is the BVNC encoded as a 64-bit
+	 * value as follows:
+	 *
+	 *    +--------+--------+--------+-------+
+	 *    | 63..48 | 47..32 | 31..16 | 15..0 |
+	 *    +========+========+========+=======+
+	 *    | B      | V      | N      | C     |
+	 *    +--------+--------+--------+-------+
+	 */
+	__u64 gpu_id;
+
+	/**
+	 * @num_phantoms: Number of Phantoms present.
+	 */
+	__u32 num_phantoms;
+
+	/** @_padding_c: Reserved. This field must be zeroed. */
+	__u32 _padding_c;
+};
+
+/**
+ * struct drm_pvr_dev_query_runtime_info - Container used to fetch information
+ * about the graphics runtime.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_QUERY_RUNTIME_INFO_GET.
+ */
+struct drm_pvr_dev_query_runtime_info {
+	/**
+	 * @free_list_min_pages: Minimum allowed free list size,
+	 * in PM physical pages.
+	 */
+	__u64 free_list_min_pages;
+
+	/**
+	 * @free_list_max_pages: Maximum allowed free list size,
+	 * in PM physical pages.
+	 */
+	__u64 free_list_max_pages;
+
+	/**
+	 * @common_store_alloc_region_size: Size of the Allocation
+	 * Region within the Common Store used for coefficient and shared
+	 * registers, in dwords.
+	 */
+	__u32 common_store_alloc_region_size;
+
+	/**
+	 * @common_store_partition_space_size: Size of the
+	 * Partition Space within the Common Store for output buffers, in
+	 * dwords.
+	 */
+	__u32 common_store_partition_space_size;
+
+	/**
+	 * @max_coeffs: Maximum coefficients, in dwords.
+	 */
+	__u32 max_coeffs;
+
+	/**
+	 * @cdm_max_local_mem_size_regs: Maximum amount of local
+	 * memory available to a compute kernel, in dwords.
+	 */
+	__u32 cdm_max_local_mem_size_regs;
+};
+
+/**
+ * struct drm_pvr_dev_query_quirks - Container used to fetch information about
+ * hardware fixes for which the device may require support in the user mode
+ * driver.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_QUERY_QUIRKS_GET.
+ */
+struct drm_pvr_dev_query_quirks {
+	/**
+	 * @quirks: A userspace address for the hardware quirks __u32 array.
+	 *
+	 * The first @musthave_count items in the list are quirks that the
+	 * client must support for this device. If userspace does not support
+	 * all these quirks then functionality is not guaranteed and client
+	 * initialisation must fail.
+	 * The remaining quirks in the list affect userspace and the kernel or
+	 * firmware. They are disabled by default and require userspace to
+	 * opt-in. The opt-in mechanism depends on the quirk.
+	 */
+	__u64 quirks;
+
+	/** @count: Length of @quirks (number of __u32). */
+	__u16 count;
+
+	/**
+	 * @musthave_count: The number of entries in @quirks that are
+	 * mandatory, starting at index 0.
+	 */
+	__u16 musthave_count;
+
+	/** @_padding_c: Reserved. This field must be zeroed. */
+	__u32 _padding_c;
+};
+
+/**
+ * struct drm_pvr_dev_query_enhancements - Container used to fetch information
+ * about optional enhancements supported by the device that require support in
+ * the user mode driver.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_ENHANCEMENTS_GET.
+ */
+struct drm_pvr_dev_query_enhancements {
+	/**
+	 * @enhancements: A userspace address for the hardware enhancements
+	 * __u32 array.
+	 *
+	 * These enhancements affect userspace and the kernel or firmware. They
+	 * are disabled by default and require userspace to opt-in. The opt-in
+	 * mechanism depends on the enhancement.
+	 */
+	__u64 enhancements;
+
+	/** @count: Length of @enhancements (number of __u32). */
+	__u16 count;
+
+	/** @_padding_a: Reserved. This field must be zeroed. */
+	__u16 _padding_a;
+
+	/** @_padding_c: Reserved. This field must be zeroed. */
+	__u32 _padding_c;
+};
+
+/**
+ * enum drm_pvr_heap_id - Array index for heap info data returned by
+ * %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+ *
+ * For compatibility reasons all indices will be present in the returned array,
+ * however some heaps may not be present. These are indicated where
+ * &struct drm_pvr_heap.size is set to zero.
+ */
+enum drm_pvr_heap_id {
+	/** @DRM_PVR_HEAP_GENERAL: General purpose heap. */
+	DRM_PVR_HEAP_GENERAL = 0,
+	/** @DRM_PVR_HEAP_PDS_CODE_DATA: PDS code and data heap. */
+	DRM_PVR_HEAP_PDS_CODE_DATA,
+	/** @DRM_PVR_HEAP_USC_CODE: USC code heap. */
+	DRM_PVR_HEAP_USC_CODE,
+	/** @DRM_PVR_HEAP_RGNHDR: Region header heap. Only used if GPU has BRN63142. */
+	DRM_PVR_HEAP_RGNHDR,
+	/** @DRM_PVR_HEAP_VIS_TEST: Visibility test heap. */
+	DRM_PVR_HEAP_VIS_TEST,
+	/** @DRM_PVR_HEAP_TRANSFER_FRAG: Transfer fragment heap. */
+	DRM_PVR_HEAP_TRANSFER_FRAG,
+
+	/**
+	 * @DRM_PVR_HEAP_COUNT: The number of heaps returned by
+	 * %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+	 *
+	 * More heaps may be added, so this also serves as the copy limit when
+	 * sent by the caller.
+	 */
+	DRM_PVR_HEAP_COUNT
+	/* Please only add additional heaps above DRM_PVR_HEAP_COUNT! */
+};
+
+/**
+ * struct drm_pvr_heap - Container holding information about a single heap.
+ *
+ * This will always be fetched as an array.
+ */
+struct drm_pvr_heap {
+	/** @base: Base address of heap. */
+	__u64 base;
+
+	/** @size: Size of heap, in bytes. Will be 0 if the heap is not present. */
+	__u64 size;
+
+	/** @flags: Flags for this heap. Currently always 0. */
+	__u32 flags;
+
+	/** @page_size_log2: Log2 of page size. */
+	__u32 page_size_log2;
+};
+
+/**
+ * struct drm_pvr_dev_query_heap_info - Container used to fetch information
+ * about heaps supported by the device driver.
+ *
+ * Please note all driver-supported heaps will be returned up to &heaps.count.
+ * Some heaps will not be present in all devices, which will be indicated by
+ * &struct drm_pvr_heap.size being set to zero.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+ */
+struct drm_pvr_dev_query_heap_info {
+	/**
+	 * @heaps: Array of &struct drm_pvr_heap. If pointer is NULL, the count
+	 * and stride will be updated with those known to the driver version, to
+	 * facilitate allocation by the caller.
+	 */
+	struct drm_pvr_obj_array heaps;
+};
+
+/**
+ * enum drm_pvr_static_data_area_usage - Array index for static data area info
+ * returned by %DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET.
+ *
+ * For compatibility reasons all indices will be present in the returned array,
+ * however some areas may not be present. These are indicated where
+ * &struct drm_pvr_static_data_area.size is set to zero.
+ */
+enum drm_pvr_static_data_area_usage {
+	/**
+	 * @DRM_PVR_STATIC_DATA_AREA_EOT: End of Tile PDS program code segment.
+	 *
+	 * The End of Tile PDS task runs at completion of a tile during a fragment job, and is
+	 * responsible for emitting the tile to the Pixel Back End.
+	 */
+	DRM_PVR_STATIC_DATA_AREA_EOT = 0,
+
+	/**
+	 * @DRM_PVR_STATIC_DATA_AREA_FENCE: MCU fence area, used during cache flush and
+	 * invalidation.
+	 *
+	 * This must point to valid physical memory but the contents otherwise are not used.
+	 */
+	DRM_PVR_STATIC_DATA_AREA_FENCE,
+
+	/**
+	 * @DRM_PVR_STATIC_DATA_AREA_VDM_SYNC: VDM sync program.
+	 *
+	 * The VDM sync program is used to synchronise multiple areas of the GPU hardware.
+	 */
+	DRM_PVR_STATIC_DATA_AREA_VDM_SYNC,
+
+	/**
+	 * @DRM_PVR_STATIC_DATA_AREA_YUV_CSC: YUV coefficients.
+	 *
+	 * Area contains up to 16 slots with stride of 64 bytes. Each is a 3x4 matrix of u16 fixed
+	 * point numbers, with 1 sign bit, 2 integer bits and 13 fractional bits.
+	 *
+	 * The slots are :
+	 * 0 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_RGB_IDENTITY_KHR
+	 * 1 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_IDENTITY_KHR (full range)
+	 * 2 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_IDENTITY_KHR (conformant range)
+	 * 3 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (full range)
+	 * 4 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (conformant range)
+	 * 5 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (full range)
+	 * 6 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (conformant range)
+	 * 7 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (full range)
+	 * 8 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (conformant range)
+	 * 9 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_601_KHR (conformant range, 10 bit)
+	 * 10 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_709_KHR (conformant range, 10 bit)
+	 * 11 = VK_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_2020_KHR (conformant range, 10 bit)
+	 * 14 = Identity (biased)
+	 * 15 = Identity
+	 */
+	DRM_PVR_STATIC_DATA_AREA_YUV_CSC,
+};
+
+/**
+ * struct drm_pvr_static_data_area - Container holding information about a
+ * single static data area.
+ *
+ * This will always be fetched as an array.
+ */
+struct drm_pvr_static_data_area {
+	/**
+	 * @area_usage: Usage of static data area.
+	 * See &enum drm_pvr_static_data_area_usage.
+	 */
+	__u16 area_usage;
+
+	/**
+	 * @location_heap_id: Array index of heap where this of static data
+	 * area is located. This array is fetched using
+	 * %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+	 */
+	__u16 location_heap_id;
+
+	/** @size: Size of static data area. Not present if set to zero. */
+	__u32 size;
+
+	/** @offset: Offset of static data area from start of heap. */
+	__u64 offset;
+};
+
+/**
+ * struct drm_pvr_dev_query_static_data_areas - Container used to fetch
+ * information about the static data areas in heaps supported by the device
+ * driver.
+ *
+ * Please note all driver-supported static data areas will be returned up to
+ * &static_data_areas.count. Some will not be present for all devices which,
+ * will be indicated by &struct drm_pvr_static_data_area.size being set to zero.
+ *
+ * Further, some heaps will not be present either. See &struct
+ * drm_pvr_dev_query_heap_info.
+ *
+ * When fetching this type &struct drm_pvr_ioctl_dev_query_args.type must be set
+ * to %DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET.
+ */
+struct drm_pvr_dev_query_static_data_areas {
+	/**
+	 * @static_data_areas: Array of &struct drm_pvr_static_data_area. If
+	 * pointer is NULL, the count and stride will be updated with those
+	 * known to the driver version, to facilitate allocation by the caller.
+	 */
+	struct drm_pvr_obj_array static_data_areas;
+};
+
+/**
+ * enum drm_pvr_dev_query - For use with &drm_pvr_ioctl_dev_query_args.type to
+ * indicate the type of the receiving container.
+ *
+ * Append only. Do not reorder.
+ */
+enum drm_pvr_dev_query {
+	/**
+	 * @DRM_PVR_DEV_QUERY_GPU_INFO_GET: The dev query args contain a pointer
+	 * to &struct drm_pvr_dev_query_gpu_info.
+	 */
+	DRM_PVR_DEV_QUERY_GPU_INFO_GET = 0,
+
+	/**
+	 * @DRM_PVR_DEV_QUERY_RUNTIME_INFO_GET: The dev query args contain a
+	 * pointer to &struct drm_pvr_dev_query_runtime_info.
+	 */
+	DRM_PVR_DEV_QUERY_RUNTIME_INFO_GET,
+
+	/**
+	 * @DRM_PVR_DEV_QUERY_QUIRKS_GET: The dev query args contain a pointer
+	 * to &struct drm_pvr_dev_query_quirks.
+	 */
+	DRM_PVR_DEV_QUERY_QUIRKS_GET,
+
+	/**
+	 * @DRM_PVR_DEV_QUERY_ENHANCEMENTS_GET: The dev query args contain a
+	 * pointer to &struct drm_pvr_dev_query_enhancements.
+	 */
+	DRM_PVR_DEV_QUERY_ENHANCEMENTS_GET,
+
+	/**
+	 * @DRM_PVR_DEV_QUERY_HEAP_INFO_GET: The dev query args contain a
+	 * pointer to &struct drm_pvr_dev_query_heap_info.
+	 */
+	DRM_PVR_DEV_QUERY_HEAP_INFO_GET,
+
+	/**
+	 * @DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET: The dev query args contain
+	 * a pointer to &struct drm_pvr_dev_query_static_data_areas.
+	 */
+	DRM_PVR_DEV_QUERY_STATIC_DATA_AREAS_GET,
+};
+
+/**
+ * struct drm_pvr_ioctl_dev_query_args - Arguments for %DRM_IOCTL_PVR_DEV_QUERY.
+ */
+struct drm_pvr_ioctl_dev_query_args {
+	/**
+	 * @type: Type of query and output struct. See &enum drm_pvr_dev_query.
+	 */
+	__u32 type;
+
+	/**
+	 * @size: Size of the receiving struct, see @type.
+	 *
+	 * After a successful call this will be updated to the written byte
+	 * length.
+	 * Can also be used to get the minimum byte length (see @pointer).
+	 * This allows additional fields to be appended to the structs in
+	 * future.
+	 */
+	__u32 size;
+
+	/**
+	 * @pointer: Pointer to struct @type.
+	 *
+	 * Must be large enough to contain @size bytes.
+	 * If pointer is NULL, the expected size will be returned in the @size
+	 * field, but no other data will be written.
+	 */
+	__u64 pointer;
+};
+
+/**
+ * DOC: PowerVR IOCTL CREATE_BO interface
+ */
+
+/**
+ * DOC: Flags for CREATE_BO
+ *
+ * We use "device" to refer to the GPU here because of the ambiguity between CPU and GPU in some
+ * fonts.
+ *
+ * Device mapping options
+ *    :DRM_PVR_BO_BYPASS_DEVICE_CACHE: Specify that device accesses to this memory will bypass the
+ *       cache. This is used for buffers that will either be regularly updated by the CPU (eg free
+ *       lists) or will be accessed only once and therefore isn't worth caching (eg partial render
+ *       buffers).
+ *       By default, the device flushes its memory caches after every job, so this is not normally
+ *       required for coherency.
+ *    :DRM_PVR_BO_PM_FW_PROTECT: Specify that only the Parameter Manager (PM) and/or firmware
+ *       processor should be allowed to access this memory when mapped to the device. It is not
+ *       valid to specify this flag with DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS.
+ *
+ * CPU mapping options
+ *    :DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS: Allow userspace to map and access the contents of this
+ *       memory. It is not valid to specify this flag with DRM_PVR_BO_PM_FW_PROTECT.
+ */
+#define DRM_PVR_BO_BYPASS_DEVICE_CACHE _BITULL(0)
+#define DRM_PVR_BO_PM_FW_PROTECT _BITULL(1)
+#define DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS _BITULL(2)
+/* Bits 3..63 are reserved. */
+
+#define DRM_PVR_BO_FLAGS_MASK (DRM_PVR_BO_BYPASS_DEVICE_CACHE | DRM_PVR_BO_PM_FW_PROTECT | \
+			       DRM_PVR_BO_ALLOW_CPU_USERSPACE_ACCESS)
+
+/**
+ * struct drm_pvr_ioctl_create_bo_args - Arguments for %DRM_IOCTL_PVR_CREATE_BO
+ */
+struct drm_pvr_ioctl_create_bo_args {
+	/**
+	 * @size: [IN] Size of buffer object to create. This must be page size
+	 * aligned.
+	 */
+	__u64 size;
+
+	/**
+	 * @handle: [OUT] GEM handle of the new buffer object for use in
+	 * userspace.
+	 */
+	__u32 handle;
+
+	/** @_padding_c: Reserved. This field must be zeroed. */
+	__u32 _padding_c;
+
+	/**
+	 * @flags: [IN] Options which will affect the behaviour of this
+	 * creation operation and future mapping operations on the created
+	 * object. This field must be a valid combination of ``DRM_PVR_BO_*``
+	 * values, with all bits marked as reserved set to zero.
+	 */
+	__u64 flags;
+};
+
+/**
+ * DOC: PowerVR IOCTL GET_BO_MMAP_OFFSET interface
+ */
+
+/**
+ * struct drm_pvr_ioctl_get_bo_mmap_offset_args - Arguments for
+ * %DRM_IOCTL_PVR_GET_BO_MMAP_OFFSET
+ *
+ * Like other DRM drivers, the "mmap" IOCTL doesn't actually map any memory.
+ * Instead, it allocates a fake offset which refers to the specified buffer
+ * object. This offset can be used with a real mmap call on the DRM device
+ * itself.
+ */
+struct drm_pvr_ioctl_get_bo_mmap_offset_args {
+	/** @handle: [IN] GEM handle of the buffer object to be mapped. */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+
+	/** @offset: [OUT] Fake offset to use in the real mmap call. */
+	__u64 offset;
+};
+
+/**
+ * DOC: PowerVR IOCTL CREATE_VM_CONTEXT and DESTROY_VM_CONTEXT interfaces
+ */
+
+/**
+ * struct drm_pvr_ioctl_create_vm_context_args - Arguments for
+ * %DRM_IOCTL_PVR_CREATE_VM_CONTEXT
+ */
+struct drm_pvr_ioctl_create_vm_context_args {
+	/** @handle: [OUT] Handle for new VM context. */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+};
+
+/**
+ * struct drm_pvr_ioctl_destroy_vm_context_args - Arguments for
+ * %DRM_IOCTL_PVR_DESTROY_VM_CONTEXT
+ */
+struct drm_pvr_ioctl_destroy_vm_context_args {
+	/**
+	 * @handle: [IN] Handle for VM context to be destroyed.
+	 */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+};
+
+/**
+ * DOC: PowerVR IOCTL VM_MAP and VM_UNMAP interfaces
+ *
+ * The VM UAPI allows userspace to create buffer object mappings in GPU virtual address space.
+ *
+ * The client is responsible for managing GPU address space. It should allocate mappings within
+ * the heaps returned by %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+ *
+ * %DRM_IOCTL_PVR_VM_MAP creates a new mapping. The client provides the target virtual address for
+ * the mapping. Size and offset within the mapped buffer object can be specified, so the client can
+ * partially map a buffer.
+ *
+ * %DRM_IOCTL_PVR_VM_UNMAP removes a mapping. The entire mapping will be removed from GPU address
+ * space only if the size of the mapping matches that known to the driver.
+ */
+
+/**
+ * struct drm_pvr_ioctl_vm_map_args - Arguments for %DRM_IOCTL_PVR_VM_MAP.
+ */
+struct drm_pvr_ioctl_vm_map_args {
+	/**
+	 * @vm_context_handle: [IN] Handle for VM context for this mapping to
+	 * exist in.
+	 */
+	__u32 vm_context_handle;
+
+	/** @flags: [IN] Flags which affect this mapping. Currently always 0. */
+	__u32 flags;
+
+	/**
+	 * @device_addr: [IN] Requested device-virtual address for the mapping.
+	 * This must be non-zero and aligned to the device page size for the
+	 * heap containing the requested address. It is an error to specify an
+	 * address which is not contained within one of the heaps returned by
+	 * %DRM_PVR_DEV_QUERY_HEAP_INFO_GET.
+	 */
+	__u64 device_addr;
+
+	/**
+	 * @handle: [IN] Handle of the target buffer object. This must be a
+	 * valid handle returned by %DRM_IOCTL_PVR_CREATE_BO.
+	 */
+	__u32 handle;
+
+	/** @_padding_14: Reserved. This field must be zeroed. */
+	__u32 _padding_14;
+
+	/**
+	 * @offset: [IN] Offset into the target bo from which to begin the
+	 * mapping.
+	 */
+	__u64 offset;
+
+	/**
+	 * @size: [IN] Size of the requested mapping. Must be aligned to
+	 * the device page size for the heap containing the requested address,
+	 * as well as the host page size. When added to @device_addr, the
+	 * result must not overflow the heap which contains @device_addr (i.e.
+	 * the range specified by @device_addr and @size must be completely
+	 * contained within a single heap specified by
+	 * %DRM_PVR_DEV_QUERY_HEAP_INFO_GET).
+	 */
+	__u64 size;
+};
+
+/**
+ * struct drm_pvr_ioctl_vm_unmap_args - Arguments for %DRM_IOCTL_PVR_VM_UNMAP.
+ */
+struct drm_pvr_ioctl_vm_unmap_args {
+	/**
+	 * @vm_context_handle: [IN] Handle for VM context that this mapping
+	 * exists in.
+	 */
+	__u32 vm_context_handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+
+	/**
+	 * @device_addr: [IN] Device-virtual address at the start of the target
+	 * mapping. This must be non-zero.
+	 */
+	__u64 device_addr;
+
+	/**
+	 * @size: Size in bytes of the target mapping. This must be non-zero.
+	 */
+	__u64 size;
+};
+
+/**
+ * DOC: PowerVR IOCTL CREATE_CONTEXT and DESTROY_CONTEXT interfaces
+ */
+
+/**
+ * enum drm_pvr_ctx_priority - Arguments for
+ * &drm_pvr_ioctl_create_context_args.priority
+ */
+enum drm_pvr_ctx_priority {
+	/** @DRM_PVR_CTX_PRIORITY_LOW: Priority below normal. */
+	DRM_PVR_CTX_PRIORITY_LOW = -512,
+
+	/** @DRM_PVR_CTX_PRIORITY_NORMAL: Normal priority. */
+	DRM_PVR_CTX_PRIORITY_NORMAL = 0,
+
+	/**
+	 * @DRM_PVR_CTX_PRIORITY_HIGH: Priority above normal.
+	 * Note this requires ``CAP_SYS_NICE`` or ``DRM_MASTER``.
+	 */
+	DRM_PVR_CTX_PRIORITY_HIGH = 512,
+};
+
+/**
+ * enum drm_pvr_ctx_type - Arguments for
+ * &struct drm_pvr_ioctl_create_context_args.type
+ */
+enum drm_pvr_ctx_type {
+	/**
+	 * @DRM_PVR_CTX_TYPE_RENDER: Render context.
+	 */
+	DRM_PVR_CTX_TYPE_RENDER = 0,
+
+	/**
+	 * @DRM_PVR_CTX_TYPE_COMPUTE: Compute context.
+	 */
+	DRM_PVR_CTX_TYPE_COMPUTE,
+
+	/**
+	 * @DRM_PVR_CTX_TYPE_TRANSFER_FRAG: Transfer context for fragment data
+	 * master.
+	 */
+	DRM_PVR_CTX_TYPE_TRANSFER_FRAG,
+};
+
+/**
+ * struct drm_pvr_ioctl_create_context_args - Arguments for
+ * %DRM_IOCTL_PVR_CREATE_CONTEXT
+ */
+struct drm_pvr_ioctl_create_context_args {
+	/**
+	 * @type: [IN] Type of context to create.
+	 *
+	 * This must be one of the values defined by &enum drm_pvr_ctx_type.
+	 */
+	__u32 type;
+
+	/** @flags: [IN] Flags for context. */
+	__u32 flags;
+
+	/**
+	 * @priority: [IN] Priority of new context.
+	 *
+	 * This must be one of the values defined by &enum drm_pvr_ctx_priority.
+	 */
+	__s32 priority;
+
+	/** @handle: [OUT] Handle for new context. */
+	__u32 handle;
+
+	/**
+	 * @static_context_state: [IN] Pointer to static context state stream.
+	 */
+	__u64 static_context_state;
+
+	/**
+	 * @static_context_state_len: [IN] Length of static context state, in bytes.
+	 */
+	__u32 static_context_state_len;
+
+	/**
+	 * @vm_context_handle: [IN] Handle for VM context that this context is
+	 * associated with.
+	 */
+	__u32 vm_context_handle;
+
+	/**
+	 * @callstack_addr: [IN] Address for initial call stack pointer. Only valid
+	 * if @type is %DRM_PVR_CTX_TYPE_RENDER, otherwise must be 0.
+	 */
+	__u64 callstack_addr;
+};
+
+/**
+ * struct drm_pvr_ioctl_destroy_context_args - Arguments for
+ * %DRM_IOCTL_PVR_DESTROY_CONTEXT
+ */
+struct drm_pvr_ioctl_destroy_context_args {
+	/**
+	 * @handle: [IN] Handle for context to be destroyed.
+	 */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+};
+
+/**
+ * DOC: PowerVR IOCTL CREATE_FREE_LIST and DESTROY_FREE_LIST interfaces
+ */
+
+/**
+ * struct drm_pvr_ioctl_create_free_list_args - Arguments for
+ * %DRM_IOCTL_PVR_CREATE_FREE_LIST
+ *
+ * Free list arguments have the following constraints :
+ *
+ * - @max_num_pages must be greater than zero.
+ * - @grow_threshold must be between 0 and 100.
+ * - @grow_num_pages must be less than or equal to &max_num_pages.
+ * - @initial_num_pages, @max_num_pages and @grow_num_pages must be multiples
+ *   of 4.
+ * - When &grow_num_pages is 0, @initial_num_pages must be equal to
+ *   @max_num_pages.
+ * - When &grow_num_pages is non-zero, @initial_num_pages must be less than
+ *   @max_num_pages.
+ */
+struct drm_pvr_ioctl_create_free_list_args {
+	/**
+	 * @free_list_gpu_addr: [IN] Address of GPU mapping of buffer object
+	 * containing memory to be used by free list.
+	 *
+	 * The mapped region of the buffer object must be at least
+	 * @max_num_pages * ``sizeof(__u32)``.
+	 *
+	 * The buffer object must have been created with
+	 * %DRM_PVR_BO_DEVICE_PM_FW_PROTECT set and
+	 * %DRM_PVR_BO_CPU_ALLOW_USERSPACE_ACCESS not set.
+	 */
+	__u64 free_list_gpu_addr;
+
+	/** @initial_num_pages: [IN] Pages initially allocated to free list. */
+	__u32 initial_num_pages;
+
+	/** @max_num_pages: [IN] Maximum number of pages in free list. */
+	__u32 max_num_pages;
+
+	/** @grow_num_pages: [IN] Pages to grow free list by per request. */
+	__u32 grow_num_pages;
+
+	/**
+	 * @grow_threshold: [IN] Percentage of FL memory used that should
+	 * trigger a new grow request.
+	 */
+	__u32 grow_threshold;
+
+	/**
+	 * @vm_context_handle: [IN] Handle for VM context that the free list buffer
+	 * object is mapped in.
+	 */
+	__u32 vm_context_handle;
+
+	/**
+	 * @handle: [OUT] Handle for created free list.
+	 */
+	__u32 handle;
+};
+
+/**
+ * struct drm_pvr_ioctl_destroy_free_list_args - Arguments for
+ * %DRM_IOCTL_PVR_DESTROY_FREE_LIST
+ */
+struct drm_pvr_ioctl_destroy_free_list_args {
+	/**
+	 * @handle: [IN] Handle for free list to be destroyed.
+	 */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+};
+
+/**
+ * DOC: PowerVR IOCTL CREATE_HWRT_DATASET and DESTROY_HWRT_DATASET interfaces
+ */
+
+/**
+ * struct drm_pvr_create_hwrt_geom_data_args - Geometry data arguments used for
+ * &struct drm_pvr_ioctl_create_hwrt_dataset_args.geom_data_args.
+ */
+struct drm_pvr_create_hwrt_geom_data_args {
+	/** @tpc_dev_addr: [IN] Tail pointer cache GPU virtual address. */
+	__u64 tpc_dev_addr;
+
+	/** @tpc_size: [IN] Size of TPC, in bytes. */
+	__u32 tpc_size;
+
+	/** @tpc_stride: [IN] Stride between layers in TPC, in pages */
+	__u32 tpc_stride;
+
+	/** @vheap_table_dev_addr: [IN] VHEAP table GPU virtual address. */
+	__u64 vheap_table_dev_addr;
+
+	/** @rtc_dev_addr: [IN] Render Target Cache virtual address. */
+	__u64 rtc_dev_addr;
+};
+
+/**
+ * struct drm_pvr_create_hwrt_rt_data_args - Render target arguments used for
+ * &struct drm_pvr_ioctl_create_hwrt_dataset_args.rt_data_args.
+ */
+struct drm_pvr_create_hwrt_rt_data_args {
+	/** @pm_mlist_dev_addr: [IN] PM MLIST GPU virtual address. */
+	__u64 pm_mlist_dev_addr;
+
+	/** @macrotile_array_dev_addr: [IN] Macrotile array GPU virtual address. */
+	__u64 macrotile_array_dev_addr;
+
+	/** @region_header_dev_addr: [IN] Region header array GPU virtual address. */
+	__u64 region_header_dev_addr;
+};
+
+#define PVR_DRM_HWRT_FREE_LIST_LOCAL 0
+#define PVR_DRM_HWRT_FREE_LIST_GLOBAL 1U
+
+/**
+ * struct drm_pvr_ioctl_create_hwrt_dataset_args - Arguments for
+ * %DRM_IOCTL_PVR_CREATE_HWRT_DATASET
+ */
+struct drm_pvr_ioctl_create_hwrt_dataset_args {
+	/** @geom_data_args: [IN] Geometry data arguments. */
+	struct drm_pvr_create_hwrt_geom_data_args geom_data_args;
+
+	/**
+	 * @rt_data_args: [IN] Array of render target arguments.
+	 *
+	 * Each entry in this array represents a render target in a double buffered
+	 * setup.
+	 */
+	struct drm_pvr_create_hwrt_rt_data_args rt_data_args[2];
+
+	/**
+	 * @free_list_handles: [IN] Array of free list handles.
+	 *
+	 * free_list_handles[PVR_DRM_HWRT_FREE_LIST_LOCAL] must have initial
+	 * size of at least that reported by
+	 * &drm_pvr_dev_query_runtime_info.free_list_min_pages.
+	 */
+	__u32 free_list_handles[2];
+
+	/** @width: [IN] Width in pixels. */
+	__u32 width;
+
+	/** @height: [IN] Height in pixels. */
+	__u32 height;
+
+	/** @samples: [IN] Number of samples. */
+	__u32 samples;
+
+	/** @layers: [IN] Number of layers. */
+	__u32 layers;
+
+	/** @isp_merge_lower_x: [IN] Lower X coefficient for triangle merging. */
+	__u32 isp_merge_lower_x;
+
+	/** @isp_merge_lower_y: [IN] Lower Y coefficient for triangle merging. */
+	__u32 isp_merge_lower_y;
+
+	/** @isp_merge_scale_x: [IN] Scale X coefficient for triangle merging. */
+	__u32 isp_merge_scale_x;
+
+	/** @isp_merge_scale_y: [IN] Scale Y coefficient for triangle merging. */
+	__u32 isp_merge_scale_y;
+
+	/** @isp_merge_upper_x: [IN] Upper X coefficient for triangle merging. */
+	__u32 isp_merge_upper_x;
+
+	/** @isp_merge_upper_y: [IN] Upper Y coefficient for triangle merging. */
+	__u32 isp_merge_upper_y;
+
+	/**
+	 * @region_header_size: [IN] Size of region header array. This common field is used by
+	 * both render targets in this data set.
+	 *
+	 * The units for this field differ depending on what version of the simple internal
+	 * parameter format the device uses. If format 2 is in use then this is interpreted as the
+	 * number of region headers. For other formats it is interpreted as the size in dwords.
+	 */
+	__u32 region_header_size;
+
+	/**
+	 * @handle: [OUT] Handle for created HWRT dataset.
+	 */
+	__u32 handle;
+};
+
+/**
+ * struct drm_pvr_ioctl_destroy_hwrt_dataset_args - Arguments for
+ * %DRM_IOCTL_PVR_DESTROY_HWRT_DATASET
+ */
+struct drm_pvr_ioctl_destroy_hwrt_dataset_args {
+	/**
+	 * @handle: [IN] Handle for HWRT dataset to be destroyed.
+	 */
+	__u32 handle;
+
+	/** @_padding_4: Reserved. This field must be zeroed. */
+	__u32 _padding_4;
+};
+
+/**
+ * DOC: PowerVR IOCTL SUBMIT_JOBS interface
+ */
+
+/**
+ * DOC: Flags for the drm_pvr_sync_op object.
+ *
+ * .. c:macro:: DRM_PVR_SYNC_OP_HANDLE_TYPE_MASK
+ *
+ *    Handle type mask for the drm_pvr_sync_op::flags field.
+ *
+ * .. c:macro:: DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_SYNCOBJ
+ *
+ *    Indicates the handle passed in drm_pvr_sync_op::handle is a syncobj handle.
+ *    This is the default type.
+ *
+ * .. c:macro:: DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_TIMELINE_SYNCOBJ
+ *
+ *    Indicates the handle passed in drm_pvr_sync_op::handle is a timeline syncobj handle.
+ *
+ * .. c:macro:: DRM_PVR_SYNC_OP_FLAG_SIGNAL
+ *
+ *    Signal operation requested. The out-fence bound to the job will be attached to
+ *    the syncobj whose handle is passed in drm_pvr_sync_op::handle.
+ *
+ * .. c:macro:: DRM_PVR_SYNC_OP_FLAG_WAIT
+ *
+ *    Wait operation requested. The job will wait for this particular syncobj or syncobj
+ *    point to be signaled before being started.
+ *    This is the default operation.
+ */
+#define DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_MASK 0xf
+#define DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_SYNCOBJ 0
+#define DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_TIMELINE_SYNCOBJ 1
+#define DRM_PVR_SYNC_OP_FLAG_SIGNAL _BITULL(31)
+#define DRM_PVR_SYNC_OP_FLAG_WAIT 0
+
+#define DRM_PVR_SYNC_OP_FLAGS_MASK (DRM_PVR_SYNC_OP_FLAG_HANDLE_TYPE_MASK | \
+				    DRM_PVR_SYNC_OP_FLAG_SIGNAL)
+
+/**
+ * struct drm_pvr_sync_op - Object describing a sync operation
+ */
+struct drm_pvr_sync_op {
+	/** @handle: Handle of sync object. */
+	__u32 handle;
+
+	/** @flags: Combination of ``DRM_PVR_SYNC_OP_FLAG_`` flags. */
+	__u32 flags;
+
+	/** @value: Timeline value for this drm_syncobj. MBZ for a binary syncobj. */
+	__u64 value;
+};
+
+/**
+ * DOC: Flags for SUBMIT_JOB ioctl geometry command.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_GEOM_CMD_FIRST
+ *
+ *    Indicates if this the first command to be issued for a render.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_GEOM_CMD_LAST
+ *
+ *    Indicates if this the last command to be issued for a render.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_GEOM_CMD_SINGLE_CORE
+ *
+ *    Forces to use single core in a multi core device.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_GEOM_CMD_FLAGS_MASK
+ *
+ *    Logical OR of all the geometry cmd flags.
+ */
+#define DRM_PVR_SUBMIT_JOB_GEOM_CMD_FIRST _BITULL(0)
+#define DRM_PVR_SUBMIT_JOB_GEOM_CMD_LAST _BITULL(1)
+#define DRM_PVR_SUBMIT_JOB_GEOM_CMD_SINGLE_CORE _BITULL(2)
+#define DRM_PVR_SUBMIT_JOB_GEOM_CMD_FLAGS_MASK                                 \
+	(DRM_PVR_SUBMIT_JOB_GEOM_CMD_FIRST |                                   \
+	 DRM_PVR_SUBMIT_JOB_GEOM_CMD_LAST |                                    \
+	 DRM_PVR_SUBMIT_JOB_GEOM_CMD_SINGLE_CORE)
+
+/**
+ * DOC: Flags for SUBMIT_JOB ioctl fragment command.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_SINGLE_CORE
+ *
+ *    Use single core in a multi core setup.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_DEPTHBUFFER
+ *
+ *    Indicates whether a depth buffer is present.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_STENCILBUFFER
+ *
+ *    Indicates whether a stencil buffer is present.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_PREVENT_CDM_OVERLAP
+ *
+ *    Disallow compute overlapped with this render.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_GET_VIS_RESULTS
+ *
+ *    Indicates whether this render produces visibility results.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_SCRATCHBUFFER
+ *
+ *    Indicates whether partial renders write to a scratch buffer instead of
+ *    the final surface. It also forces the full screen copy expected to be
+ *    present on the last render after all partial renders have completed.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE
+ *
+ *    Disable pixel merging for this render.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_FRAG_CMD_FLAGS_MASK
+ *
+ *    Logical OR of all the fragment cmd flags.
+ */
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_SINGLE_CORE _BITULL(0)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_DEPTHBUFFER _BITULL(1)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_STENCILBUFFER _BITULL(2)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_PREVENT_CDM_OVERLAP _BITULL(3)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_SCRATCHBUFFER _BITULL(4)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_GET_VIS_RESULTS _BITULL(5)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_PARTIAL_RENDER _BITULL(6)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE _BITULL(7)
+#define DRM_PVR_SUBMIT_JOB_FRAG_CMD_FLAGS_MASK                                 \
+	(DRM_PVR_SUBMIT_JOB_FRAG_CMD_SINGLE_CORE |                             \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_DEPTHBUFFER |                             \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_STENCILBUFFER |                           \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_PREVENT_CDM_OVERLAP |                     \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_SCRATCHBUFFER |                           \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_GET_VIS_RESULTS |                         \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_PARTIAL_RENDER |                          \
+	 DRM_PVR_SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE)
+
+/**
+ * DOC: Flags for SUBMIT_JOB ioctl compute command.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_PREVENT_ALL_OVERLAP
+ *
+ *    Disallow other jobs overlapped with this compute.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_SINGLE_CORE
+ *
+ *    Forces to use single core in a multi core device.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_FLAGS_MASK
+ *
+ *    Logical OR of all the compute cmd flags.
+ */
+#define DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_PREVENT_ALL_OVERLAP _BITULL(0)
+#define DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_SINGLE_CORE _BITULL(1)
+#define DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_FLAGS_MASK         \
+	(DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_PREVENT_ALL_OVERLAP | \
+	 DRM_PVR_SUBMIT_JOB_COMPUTE_CMD_SINGLE_CORE)
+
+/**
+ * DOC: Flags for SUBMIT_JOB ioctl transfer command.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_SINGLE_CORE
+ *
+ *    Forces job to use a single core in a multi core device.
+ *
+ * .. c:macro:: DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_FLAGS_MASK
+ *
+ *    Logical OR of all the transfer cmd flags.
+ */
+#define DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_SINGLE_CORE _BITULL(0)
+
+#define DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_FLAGS_MASK \
+	DRM_PVR_SUBMIT_JOB_TRANSFER_CMD_SINGLE_CORE
+
+/**
+ * enum drm_pvr_job_type - Arguments for &struct drm_pvr_job.job_type
+ */
+enum drm_pvr_job_type {
+	/** @DRM_PVR_JOB_TYPE_GEOMETRY: Job type is geometry. */
+	DRM_PVR_JOB_TYPE_GEOMETRY = 0,
+
+	/** @DRM_PVR_JOB_TYPE_FRAGMENT: Job type is fragment. */
+	DRM_PVR_JOB_TYPE_FRAGMENT,
+
+	/** @DRM_PVR_JOB_TYPE_COMPUTE: Job type is compute. */
+	DRM_PVR_JOB_TYPE_COMPUTE,
+
+	/** @DRM_PVR_JOB_TYPE_TRANSFER_FRAG: Job type is a fragment transfer. */
+	DRM_PVR_JOB_TYPE_TRANSFER_FRAG,
+};
+
+/**
+ * struct drm_pvr_hwrt_data_ref - Reference HWRT data
+ */
+struct drm_pvr_hwrt_data_ref {
+	/** @set_handle: HWRT data set handle. */
+	__u32 set_handle;
+
+	/** @data_index: Index of the HWRT data inside the data set. */
+	__u32 data_index;
+};
+
+/**
+ * struct drm_pvr_job - Job arguments passed to the %DRM_IOCTL_PVR_SUBMIT_JOBS ioctl
+ */
+struct drm_pvr_job {
+	/**
+	 * @type: [IN] Type of job being submitted
+	 *
+	 * This must be one of the values defined by &enum drm_pvr_job_type.
+	 */
+	__u32 type;
+
+	/**
+	 * @context_handle: [IN] Context handle.
+	 *
+	 * When @job_type is %DRM_PVR_JOB_TYPE_RENDER, %DRM_PVR_JOB_TYPE_COMPUTE or
+	 * %DRM_PVR_JOB_TYPE_TRANSFER_FRAG, this must be a valid handle returned by
+	 * %DRM_IOCTL_PVR_CREATE_CONTEXT. The type of context must be compatible
+	 * with the type of job being submitted.
+	 *
+	 * When @job_type is %DRM_PVR_JOB_TYPE_NULL, this must be zero.
+	 */
+	__u32 context_handle;
+
+	/**
+	 * @flags: [IN] Flags for command.
+	 *
+	 * Those are job-dependent. See all ``DRM_PVR_SUBMIT_JOB_*``.
+	 */
+	__u32 flags;
+
+	/**
+	 * @cmd_stream_len: [IN] Length of command stream, in bytes.
+	 */
+	__u32 cmd_stream_len;
+
+	/**
+	 * @cmd_stream: [IN] Pointer to command stream for command.
+	 *
+	 * The command stream must be u64-aligned.
+	 */
+	__u64 cmd_stream;
+
+	/** @sync_ops: [IN] Fragment sync operations. */
+	struct drm_pvr_obj_array sync_ops;
+
+	/**
+	 * @hwrt: [IN] HWRT data used by render jobs (geometry or fragment).
+	 *
+	 * Must be zero for non-render jobs.
+	 */
+	struct drm_pvr_hwrt_data_ref hwrt;
+};
+
+/**
+ * struct drm_pvr_ioctl_submit_jobs_args - Arguments for %DRM_IOCTL_PVR_SUBMIT_JOB
+ *
+ * If the syscall returns an error it is important to check the value of
+ * @jobs.count. This indicates the index into @jobs.array where the
+ * error occurred.
+ */
+struct drm_pvr_ioctl_submit_jobs_args {
+	/** @jobs: [IN] Array of jobs to submit. */
+	struct drm_pvr_obj_array jobs;
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* PVR_DRM_UAPI_H */
diff --git a/original/uapi/drm/qaic_accel.h b/original/uapi/drm/qaic_accel.h
index 43ac5d8..9dab323 100644
--- a/original/uapi/drm/qaic_accel.h
+++ b/original/uapi/drm/qaic_accel.h
@@ -287,8 +287,9 @@ struct qaic_execute_entry {
  * struct qaic_partial_execute_entry - Defines a BO to resize and submit.
  * @handle: In. GEM handle of the BO to commit to the device.
  * @dir: In. Direction of data. 1 = to device, 2 = from device.
- * @resize: In. New size of the BO.  Must be <= the original BO size.  0 is
- *	    short for no resize.
+ * @resize: In. New size of the BO.  Must be <= the original BO size.
+ *	    @resize as 0 would be interpreted as no DMA transfer is
+ *	    involved.
  */
 struct qaic_partial_execute_entry {
 	__u32 handle;
diff --git a/original/uapi/drm/v3d_drm.h b/original/uapi/drm/v3d_drm.h
index 3dfc0af..dce1835 100644
--- a/original/uapi/drm/v3d_drm.h
+++ b/original/uapi/drm/v3d_drm.h
@@ -41,6 +41,7 @@ extern "C" {
 #define DRM_V3D_PERFMON_CREATE                    0x08
 #define DRM_V3D_PERFMON_DESTROY                   0x09
 #define DRM_V3D_PERFMON_GET_VALUES                0x0a
+#define DRM_V3D_SUBMIT_CPU                        0x0b
 
 #define DRM_IOCTL_V3D_SUBMIT_CL           DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl)
 #define DRM_IOCTL_V3D_WAIT_BO             DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo)
@@ -56,6 +57,7 @@ extern "C" {
 						   struct drm_v3d_perfmon_destroy)
 #define DRM_IOCTL_V3D_PERFMON_GET_VALUES  DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_GET_VALUES, \
 						   struct drm_v3d_perfmon_get_values)
+#define DRM_IOCTL_V3D_SUBMIT_CPU          DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CPU, struct drm_v3d_submit_cpu)
 
 #define DRM_V3D_SUBMIT_CL_FLUSH_CACHE             0x01
 #define DRM_V3D_SUBMIT_EXTENSION		  0x02
@@ -69,7 +71,13 @@ extern "C" {
 struct drm_v3d_extension {
 	__u64 next;
 	__u32 id;
-#define DRM_V3D_EXT_ID_MULTI_SYNC		0x01
+#define DRM_V3D_EXT_ID_MULTI_SYNC			0x01
+#define DRM_V3D_EXT_ID_CPU_INDIRECT_CSD		0x02
+#define DRM_V3D_EXT_ID_CPU_TIMESTAMP_QUERY		0x03
+#define DRM_V3D_EXT_ID_CPU_RESET_TIMESTAMP_QUERY	0x04
+#define DRM_V3D_EXT_ID_CPU_COPY_TIMESTAMP_QUERY	0x05
+#define DRM_V3D_EXT_ID_CPU_RESET_PERFORMANCE_QUERY	0x06
+#define DRM_V3D_EXT_ID_CPU_COPY_PERFORMANCE_QUERY	0x07
 	__u32 flags; /* mbz */
 };
 
@@ -93,6 +101,7 @@ enum v3d_queue {
 	V3D_TFU,
 	V3D_CSD,
 	V3D_CACHE_CLEAN,
+	V3D_CPU,
 };
 
 /**
@@ -276,6 +285,7 @@ enum drm_v3d_param {
 	DRM_V3D_PARAM_SUPPORTS_CACHE_FLUSH,
 	DRM_V3D_PARAM_SUPPORTS_PERFMON,
 	DRM_V3D_PARAM_SUPPORTS_MULTISYNC_EXT,
+	DRM_V3D_PARAM_SUPPORTS_CPU_QUEUE,
 };
 
 struct drm_v3d_get_param {
@@ -319,6 +329,11 @@ struct drm_v3d_submit_tfu {
 
 	/* Pointer to an array of ioctl extensions*/
 	__u64 extensions;
+
+	struct {
+		__u32 ioc;
+		__u32 pad;
+	} v71;
 };
 
 /* Submits a compute shader for dispatch.  This job will block on any
@@ -356,6 +371,234 @@ struct drm_v3d_submit_csd {
 	__u32 pad;
 };
 
+/**
+ * struct drm_v3d_indirect_csd - ioctl extension for the CPU job to create an
+ * indirect CSD
+ *
+ * When an extension of DRM_V3D_EXT_ID_CPU_INDIRECT_CSD id is defined, it
+ * points to this extension to define a indirect CSD submission. It creates a
+ * CPU job linked to a CSD job. The CPU job waits for the indirect CSD
+ * dependencies and, once they are signaled, it updates the CSD job config
+ * before allowing the CSD job execution.
+ */
+struct drm_v3d_indirect_csd {
+	struct drm_v3d_extension base;
+
+	/* Indirect CSD */
+	struct drm_v3d_submit_csd submit;
+
+	/* Handle of the indirect BO, that should be also attached to the
+	 * indirect CSD.
+	 */
+	__u32 indirect;
+
+	/* Offset within the BO where the workgroup counts are stored */
+	__u32 offset;
+
+	/* Workgroups size */
+	__u32 wg_size;
+
+	/* Indices of the uniforms with the workgroup dispatch counts
+	 * in the uniform stream. If the uniform rewrite is not needed,
+	 * the offset must be 0xffffffff.
+	 */
+	__u32 wg_uniform_offsets[3];
+};
+
+/**
+ * struct drm_v3d_timestamp_query - ioctl extension for the CPU job to calculate
+ * a timestamp query
+ *
+ * When an extension DRM_V3D_EXT_ID_TIMESTAMP_QUERY is defined, it points to
+ * this extension to define a timestamp query submission. This CPU job will
+ * calculate the timestamp query and update the query value within the
+ * timestamp BO. Moreover, it will signal the timestamp syncobj to indicate
+ * query availability.
+ */
+struct drm_v3d_timestamp_query {
+	struct drm_v3d_extension base;
+
+	/* Array of queries' offsets within the timestamp BO for their value */
+	__u64 offsets;
+
+	/* Array of timestamp's syncobjs to indicate its availability */
+	__u64 syncs;
+
+	/* Number of queries */
+	__u32 count;
+
+	/* mbz */
+	__u32 pad;
+};
+
+/**
+ * struct drm_v3d_reset_timestamp_query - ioctl extension for the CPU job to
+ * reset timestamp queries
+ *
+ * When an extension DRM_V3D_EXT_ID_CPU_RESET_TIMESTAMP_QUERY is defined, it
+ * points to this extension to define a reset timestamp submission. This CPU
+ * job will reset the timestamp queries based on value offset of the first
+ * query. Moreover, it will reset the timestamp syncobj to reset query
+ * availability.
+ */
+struct drm_v3d_reset_timestamp_query {
+	struct drm_v3d_extension base;
+
+	/* Array of timestamp's syncobjs to indicate its availability */
+	__u64 syncs;
+
+	/* Offset of the first query within the timestamp BO for its value */
+	__u32 offset;
+
+	/* Number of queries */
+	__u32 count;
+};
+
+/**
+ * struct drm_v3d_copy_timestamp_query - ioctl extension for the CPU job to copy
+ * query results to a buffer
+ *
+ * When an extension DRM_V3D_EXT_ID_CPU_COPY_TIMESTAMP_QUERY is defined, it
+ * points to this extension to define a copy timestamp query submission. This
+ * CPU job will copy the timestamp queries results to a BO with the offset
+ * and stride defined in the extension.
+ */
+struct drm_v3d_copy_timestamp_query {
+	struct drm_v3d_extension base;
+
+	/* Define if should write to buffer using 64 or 32 bits */
+	__u8 do_64bit;
+
+	/* Define if it can write to buffer even if the query is not available */
+	__u8 do_partial;
+
+	/* Define if it should write availability bit to buffer */
+	__u8 availability_bit;
+
+	/* mbz */
+	__u8 pad;
+
+	/* Offset of the buffer in the BO */
+	__u32 offset;
+
+	/* Stride of the buffer in the BO */
+	__u32 stride;
+
+	/* Number of queries */
+	__u32 count;
+
+	/* Array of queries' offsets within the timestamp BO for their value */
+	__u64 offsets;
+
+	/* Array of timestamp's syncobjs to indicate its availability */
+	__u64 syncs;
+};
+
+/**
+ * struct drm_v3d_reset_performance_query - ioctl extension for the CPU job to
+ * reset performance queries
+ *
+ * When an extension DRM_V3D_EXT_ID_CPU_RESET_PERFORMANCE_QUERY is defined, it
+ * points to this extension to define a reset performance submission. This CPU
+ * job will reset the performance queries by resetting the values of the
+ * performance monitors. Moreover, it will reset the syncobj to reset query
+ * availability.
+ */
+struct drm_v3d_reset_performance_query {
+	struct drm_v3d_extension base;
+
+	/* Array of performance queries's syncobjs to indicate its availability */
+	__u64 syncs;
+
+	/* Number of queries */
+	__u32 count;
+
+	/* Number of performance monitors */
+	__u32 nperfmons;
+
+	/* Array of u64 user-pointers that point to an array of kperfmon_ids */
+	__u64 kperfmon_ids;
+};
+
+/**
+ * struct drm_v3d_copy_performance_query - ioctl extension for the CPU job to copy
+ * performance query results to a buffer
+ *
+ * When an extension DRM_V3D_EXT_ID_CPU_COPY_PERFORMANCE_QUERY is defined, it
+ * points to this extension to define a copy performance query submission. This
+ * CPU job will copy the performance queries results to a BO with the offset
+ * and stride defined in the extension.
+ */
+struct drm_v3d_copy_performance_query {
+	struct drm_v3d_extension base;
+
+	/* Define if should write to buffer using 64 or 32 bits */
+	__u8 do_64bit;
+
+	/* Define if it can write to buffer even if the query is not available */
+	__u8 do_partial;
+
+	/* Define if it should write availability bit to buffer */
+	__u8 availability_bit;
+
+	/* mbz */
+	__u8 pad;
+
+	/* Offset of the buffer in the BO */
+	__u32 offset;
+
+	/* Stride of the buffer in the BO */
+	__u32 stride;
+
+	/* Number of performance monitors */
+	__u32 nperfmons;
+
+	/* Number of performance counters related to this query pool */
+	__u32 ncounters;
+
+	/* Number of queries */
+	__u32 count;
+
+	/* Array of performance queries's syncobjs to indicate its availability */
+	__u64 syncs;
+
+	/* Array of u64 user-pointers that point to an array of kperfmon_ids */
+	__u64 kperfmon_ids;
+};
+
+struct drm_v3d_submit_cpu {
+	/* Pointer to a u32 array of the BOs that are referenced by the job.
+	 *
+	 * For DRM_V3D_EXT_ID_CPU_INDIRECT_CSD, it must contain only one BO,
+	 * that contains the workgroup counts.
+	 *
+	 * For DRM_V3D_EXT_ID_TIMESTAMP_QUERY, it must contain only one BO,
+	 * that will contain the timestamp.
+	 *
+	 * For DRM_V3D_EXT_ID_CPU_RESET_TIMESTAMP_QUERY, it must contain only
+	 * one BO, that contains the timestamp.
+	 *
+	 * For DRM_V3D_EXT_ID_CPU_COPY_TIMESTAMP_QUERY, it must contain two
+	 * BOs. The first is the BO where the timestamp queries will be written
+	 * to. The second is the BO that contains the timestamp.
+	 *
+	 * For DRM_V3D_EXT_ID_CPU_RESET_PERFORMANCE_QUERY, it must contain no
+	 * BOs.
+	 *
+	 * For DRM_V3D_EXT_ID_CPU_COPY_PERFORMANCE_QUERY, it must contain one
+	 * BO, where the performance queries will be written.
+	 */
+	__u64 bo_handles;
+
+	/* Number of BO handles passed in (size is that times 4). */
+	__u32 bo_handle_count;
+
+	__u32 flags;
+
+	/* Pointer to an array of ioctl extensions*/
+	__u64 extensions;
+};
+
 enum {
 	V3D_PERFCNT_FEP_VALID_PRIMTS_NO_PIXELS,
 	V3D_PERFCNT_FEP_VALID_PRIMS,
diff --git a/original/uapi/drm/virtgpu_drm.h b/original/uapi/drm/virtgpu_drm.h
index b1d0e56..c2ce719 100644
--- a/original/uapi/drm/virtgpu_drm.h
+++ b/original/uapi/drm/virtgpu_drm.h
@@ -97,6 +97,7 @@ struct drm_virtgpu_execbuffer {
 #define VIRTGPU_PARAM_CROSS_DEVICE 5 /* Cross virtio-device resource sharing  */
 #define VIRTGPU_PARAM_CONTEXT_INIT 6 /* DRM_VIRTGPU_CONTEXT_INIT */
 #define VIRTGPU_PARAM_SUPPORTED_CAPSET_IDs 7 /* Bitmask of supported capability set ids */
+#define VIRTGPU_PARAM_EXPLICIT_DEBUG_NAME 8 /* Ability to set debug name from userspace */
 
 struct drm_virtgpu_getparam {
 	__u64 param;
@@ -198,6 +199,7 @@ struct drm_virtgpu_resource_create_blob {
 #define VIRTGPU_CONTEXT_PARAM_CAPSET_ID       0x0001
 #define VIRTGPU_CONTEXT_PARAM_NUM_RINGS       0x0002
 #define VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK 0x0003
+#define VIRTGPU_CONTEXT_PARAM_DEBUG_NAME      0x0004
 struct drm_virtgpu_context_set_param {
 	__u64 param;
 	__u64 value;
diff --git a/original/uapi/drm/xe_drm.h b/original/uapi/drm/xe_drm.h
new file mode 100644
index 0000000..bb0c8a9
--- /dev/null
+++ b/original/uapi/drm/xe_drm.h
@@ -0,0 +1,1327 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2023 Intel Corporation
+ */
+
+#ifndef _UAPI_XE_DRM_H_
+#define _UAPI_XE_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*
+ * Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ * Sections in this file are organized as follows:
+ *   1. IOCTL definition
+ *   2. Extension definition and helper structs
+ *   3. IOCTL's Query structs in the order of the Query's entries.
+ *   4. The rest of IOCTL structs in the order of IOCTL declaration.
+ */
+
+/**
+ * DOC: Xe Device Block Diagram
+ *
+ * The diagram below represents a high-level simplification of a discrete
+ * GPU supported by the Xe driver. It shows some device components which
+ * are necessary to understand this API, as well as how their relations
+ * to each other. This diagram does not represent real hardware::
+ *
+ *   ┌──────────────────────────────────────────────────────────────────┐
+ *   │ ┌──────────────────────────────────────────────────┐ ┌─────────┐ │
+ *   │ │        ┌───────────────────────┐   ┌─────┐       │ │ ┌─────┐ │ │
+ *   │ │        │         VRAM0         ├───┤ ... │       │ │ │VRAM1│ │ │
+ *   │ │        └───────────┬───────────┘   └─GT1─┘       │ │ └──┬──┘ │ │
+ *   │ │ ┌──────────────────┴───────────────────────────┐ │ │ ┌──┴──┐ │ │
+ *   │ │ │ ┌─────────────────────┐  ┌─────────────────┐ │ │ │ │     │ │ │
+ *   │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │  │ ┌─────┐ ┌─────┐ │ │ │ │ │     │ │ │
+ *   │ │ │ │ │EU│ │EU│ │EU│ │EU│ │  │ │RCS0 │ │BCS0 │ │ │ │ │ │     │ │ │
+ *   │ │ │ │ └──┘ └──┘ └──┘ └──┘ │  │ └─────┘ └─────┘ │ │ │ │ │     │ │ │
+ *   │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │  │ ┌─────┐ ┌─────┐ │ │ │ │ │     │ │ │
+ *   │ │ │ │ │EU│ │EU│ │EU│ │EU│ │  │ │VCS0 │ │VCS1 │ │ │ │ │ │     │ │ │
+ *   │ │ │ │ └──┘ └──┘ └──┘ └──┘ │  │ └─────┘ └─────┘ │ │ │ │ │     │ │ │
+ *   │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │  │ ┌─────┐ ┌─────┐ │ │ │ │ │     │ │ │
+ *   │ │ │ │ │EU│ │EU│ │EU│ │EU│ │  │ │VECS0│ │VECS1│ │ │ │ │ │ ... │ │ │
+ *   │ │ │ │ └──┘ └──┘ └──┘ └──┘ │  │ └─────┘ └─────┘ │ │ │ │ │     │ │ │
+ *   │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │  │ ┌─────┐ ┌─────┐ │ │ │ │ │     │ │ │
+ *   │ │ │ │ │EU│ │EU│ │EU│ │EU│ │  │ │CCS0 │ │CCS1 │ │ │ │ │ │     │ │ │
+ *   │ │ │ │ └──┘ └──┘ └──┘ └──┘ │  │ └─────┘ └─────┘ │ │ │ │ │     │ │ │
+ *   │ │ │ └─────────DSS─────────┘  │ ┌─────┐ ┌─────┐ │ │ │ │ │     │ │ │
+ *   │ │ │                          │ │CCS2 │ │CCS3 │ │ │ │ │ │     │ │ │
+ *   │ │ │ ┌─────┐ ┌─────┐ ┌─────┐  │ └─────┘ └─────┘ │ │ │ │ │     │ │ │
+ *   │ │ │ │ ... │ │ ... │ │ ... │  │                 │ │ │ │ │     │ │ │
+ *   │ │ │ └─DSS─┘ └─DSS─┘ └─DSS─┘  └─────Engines─────┘ │ │ │ │     │ │ │
+ *   │ │ └───────────────────────────GT0────────────────┘ │ │ └─GT2─┘ │ │
+ *   │ └────────────────────────────Tile0─────────────────┘ └─ Tile1──┘ │
+ *   └─────────────────────────────Device0───────┬──────────────────────┘
+ *                                               │
+ *                        ───────────────────────┴────────── PCI bus
+ */
+
+/**
+ * DOC: Xe uAPI Overview
+ *
+ * This section aims to describe the Xe's IOCTL entries, its structs, and other
+ * Xe related uAPI such as uevents and PMU (Platform Monitoring Unit) related
+ * entries and usage.
+ *
+ * List of supported IOCTLs:
+ *  - &DRM_IOCTL_XE_DEVICE_QUERY
+ *  - &DRM_IOCTL_XE_GEM_CREATE
+ *  - &DRM_IOCTL_XE_GEM_MMAP_OFFSET
+ *  - &DRM_IOCTL_XE_VM_CREATE
+ *  - &DRM_IOCTL_XE_VM_DESTROY
+ *  - &DRM_IOCTL_XE_VM_BIND
+ *  - &DRM_IOCTL_XE_EXEC_QUEUE_CREATE
+ *  - &DRM_IOCTL_XE_EXEC_QUEUE_DESTROY
+ *  - &DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY
+ *  - &DRM_IOCTL_XE_EXEC
+ *  - &DRM_IOCTL_XE_WAIT_USER_FENCE
+ */
+
+/*
+ * xe specific ioctls.
+ *
+ * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie
+ * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset
+ * against DRM_COMMAND_BASE and should be between [0x0, 0x60).
+ */
+#define DRM_XE_DEVICE_QUERY		0x00
+#define DRM_XE_GEM_CREATE		0x01
+#define DRM_XE_GEM_MMAP_OFFSET		0x02
+#define DRM_XE_VM_CREATE		0x03
+#define DRM_XE_VM_DESTROY		0x04
+#define DRM_XE_VM_BIND			0x05
+#define DRM_XE_EXEC_QUEUE_CREATE	0x06
+#define DRM_XE_EXEC_QUEUE_DESTROY	0x07
+#define DRM_XE_EXEC_QUEUE_GET_PROPERTY	0x08
+#define DRM_XE_EXEC			0x09
+#define DRM_XE_WAIT_USER_FENCE		0x0a
+/* Must be kept compact -- no holes */
+
+#define DRM_IOCTL_XE_DEVICE_QUERY		DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_DEVICE_QUERY, struct drm_xe_device_query)
+#define DRM_IOCTL_XE_GEM_CREATE			DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_GEM_CREATE, struct drm_xe_gem_create)
+#define DRM_IOCTL_XE_GEM_MMAP_OFFSET		DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_GEM_MMAP_OFFSET, struct drm_xe_gem_mmap_offset)
+#define DRM_IOCTL_XE_VM_CREATE			DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_VM_CREATE, struct drm_xe_vm_create)
+#define DRM_IOCTL_XE_VM_DESTROY			DRM_IOW(DRM_COMMAND_BASE + DRM_XE_VM_DESTROY, struct drm_xe_vm_destroy)
+#define DRM_IOCTL_XE_VM_BIND			DRM_IOW(DRM_COMMAND_BASE + DRM_XE_VM_BIND, struct drm_xe_vm_bind)
+#define DRM_IOCTL_XE_EXEC_QUEUE_CREATE		DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_CREATE, struct drm_xe_exec_queue_create)
+#define DRM_IOCTL_XE_EXEC_QUEUE_DESTROY		DRM_IOW(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_DESTROY, struct drm_xe_exec_queue_destroy)
+#define DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY	DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_GET_PROPERTY, struct drm_xe_exec_queue_get_property)
+#define DRM_IOCTL_XE_EXEC			DRM_IOW(DRM_COMMAND_BASE + DRM_XE_EXEC, struct drm_xe_exec)
+#define DRM_IOCTL_XE_WAIT_USER_FENCE		DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_WAIT_USER_FENCE, struct drm_xe_wait_user_fence)
+
+/**
+ * DOC: Xe IOCTL Extensions
+ *
+ * Before detailing the IOCTLs and its structs, it is important to highlight
+ * that every IOCTL in Xe is extensible.
+ *
+ * Many interfaces need to grow over time. In most cases we can simply
+ * extend the struct and have userspace pass in more data. Another option,
+ * as demonstrated by Vulkan's approach to providing extensions for forward
+ * and backward compatibility, is to use a list of optional structs to
+ * provide those extra details.
+ *
+ * The key advantage to using an extension chain is that it allows us to
+ * redefine the interface more easily than an ever growing struct of
+ * increasing complexity, and for large parts of that interface to be
+ * entirely optional. The downside is more pointer chasing; chasing across
+ * the __user boundary with pointers encapsulated inside u64.
+ *
+ * Example chaining:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_xe_user_extension ext3 {
+ *		.next_extension = 0, // end
+ *		.name = ...,
+ *	};
+ *	struct drm_xe_user_extension ext2 {
+ *		.next_extension = (uintptr_t)&ext3,
+ *		.name = ...,
+ *	};
+ *	struct drm_xe_user_extension ext1 {
+ *		.next_extension = (uintptr_t)&ext2,
+ *		.name = ...,
+ *	};
+ *
+ * Typically the struct drm_xe_user_extension would be embedded in some uAPI
+ * struct, and in this case we would feed it the head of the chain(i.e ext1),
+ * which would then apply all of the above extensions.
+*/
+
+/**
+ * struct drm_xe_user_extension - Base class for defining a chain of extensions
+ */
+struct drm_xe_user_extension {
+	/**
+	 * @next_extension:
+	 *
+	 * Pointer to the next struct drm_xe_user_extension, or zero if the end.
+	 */
+	__u64 next_extension;
+
+	/**
+	 * @name: Name of the extension.
+	 *
+	 * Note that the name here is just some integer.
+	 *
+	 * Also note that the name space for this is not global for the whole
+	 * driver, but rather its scope/meaning is limited to the specific piece
+	 * of uAPI which has embedded the struct drm_xe_user_extension.
+	 */
+	__u32 name;
+
+	/**
+	 * @pad: MBZ
+	 *
+	 * All undefined bits must be zero.
+	 */
+	__u32 pad;
+};
+
+/**
+ * struct drm_xe_ext_set_property - Generic set property extension
+ *
+ * A generic struct that allows any of the Xe's IOCTL to be extended
+ * with a set_property operation.
+ */
+struct drm_xe_ext_set_property {
+	/** @base: base user extension */
+	struct drm_xe_user_extension base;
+
+	/** @property: property to set */
+	__u32 property;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+	/** @value: property value */
+	__u64 value;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_engine_class_instance - instance of an engine class
+ *
+ * It is returned as part of the @drm_xe_engine, but it also is used as
+ * the input of engine selection for both @drm_xe_exec_queue_create and
+ * @drm_xe_query_engine_cycles
+ *
+ * The @engine_class can be:
+ *  - %DRM_XE_ENGINE_CLASS_RENDER
+ *  - %DRM_XE_ENGINE_CLASS_COPY
+ *  - %DRM_XE_ENGINE_CLASS_VIDEO_DECODE
+ *  - %DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE
+ *  - %DRM_XE_ENGINE_CLASS_COMPUTE
+ *  - %DRM_XE_ENGINE_CLASS_VM_BIND - Kernel only classes (not actual
+ *    hardware engine class). Used for creating ordered queues of VM
+ *    bind operations.
+ */
+struct drm_xe_engine_class_instance {
+#define DRM_XE_ENGINE_CLASS_RENDER		0
+#define DRM_XE_ENGINE_CLASS_COPY		1
+#define DRM_XE_ENGINE_CLASS_VIDEO_DECODE	2
+#define DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE	3
+#define DRM_XE_ENGINE_CLASS_COMPUTE		4
+#define DRM_XE_ENGINE_CLASS_VM_BIND		5
+	/** @engine_class: engine class id */
+	__u16 engine_class;
+	/** @engine_instance: engine instance id */
+	__u16 engine_instance;
+	/** @gt_id: Unique ID of this GT within the PCI Device */
+	__u16 gt_id;
+	/** @pad: MBZ */
+	__u16 pad;
+};
+
+/**
+ * struct drm_xe_engine - describe hardware engine
+ */
+struct drm_xe_engine {
+	/** @instance: The @drm_xe_engine_class_instance */
+	struct drm_xe_engine_class_instance instance;
+
+	/** @reserved: Reserved */
+	__u64 reserved[3];
+};
+
+/**
+ * struct drm_xe_query_engines - describe engines
+ *
+ * If a query is made with a struct @drm_xe_device_query where .query
+ * is equal to %DRM_XE_DEVICE_QUERY_ENGINES, then the reply uses an array of
+ * struct @drm_xe_query_engines in .data.
+ */
+struct drm_xe_query_engines {
+	/** @num_engines: number of engines returned in @engines */
+	__u32 num_engines;
+	/** @pad: MBZ */
+	__u32 pad;
+	/** @engines: The returned engines for this device */
+	struct drm_xe_engine engines[];
+};
+
+/**
+ * enum drm_xe_memory_class - Supported memory classes.
+ */
+enum drm_xe_memory_class {
+	/** @DRM_XE_MEM_REGION_CLASS_SYSMEM: Represents system memory. */
+	DRM_XE_MEM_REGION_CLASS_SYSMEM = 0,
+	/**
+	 * @DRM_XE_MEM_REGION_CLASS_VRAM: On discrete platforms, this
+	 * represents the memory that is local to the device, which we
+	 * call VRAM. Not valid on integrated platforms.
+	 */
+	DRM_XE_MEM_REGION_CLASS_VRAM
+};
+
+/**
+ * struct drm_xe_mem_region - Describes some region as known to
+ * the driver.
+ */
+struct drm_xe_mem_region {
+	/**
+	 * @mem_class: The memory class describing this region.
+	 *
+	 * See enum drm_xe_memory_class for supported values.
+	 */
+	__u16 mem_class;
+	/**
+	 * @instance: The unique ID for this region, which serves as the
+	 * index in the placement bitmask used as argument for
+	 * &DRM_IOCTL_XE_GEM_CREATE
+	 */
+	__u16 instance;
+	/**
+	 * @min_page_size: Min page-size in bytes for this region.
+	 *
+	 * When the kernel allocates memory for this region, the
+	 * underlying pages will be at least @min_page_size in size.
+	 * Buffer objects with an allowable placement in this region must be
+	 * created with a size aligned to this value.
+	 * GPU virtual address mappings of (parts of) buffer objects that
+	 * may be placed in this region must also have their GPU virtual
+	 * address and range aligned to this value.
+	 * Affected IOCTLS will return %-EINVAL if alignment restrictions are
+	 * not met.
+	 */
+	__u32 min_page_size;
+	/**
+	 * @total_size: The usable size in bytes for this region.
+	 */
+	__u64 total_size;
+	/**
+	 * @used: Estimate of the memory used in bytes for this region.
+	 *
+	 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable
+	 * accounting.  Without this the value here will always equal
+	 * zero.
+	 */
+	__u64 used;
+	/**
+	 * @cpu_visible_size: How much of this region can be CPU
+	 * accessed, in bytes.
+	 *
+	 * This will always be <= @total_size, and the remainder (if
+	 * any) will not be CPU accessible. If the CPU accessible part
+	 * is smaller than @total_size then this is referred to as a
+	 * small BAR system.
+	 *
+	 * On systems without small BAR (full BAR), the probed_size will
+	 * always equal the @total_size, since all of it will be CPU
+	 * accessible.
+	 *
+	 * Note this is only tracked for DRM_XE_MEM_REGION_CLASS_VRAM
+	 * regions (for other types the value here will always equal
+	 * zero).
+	 */
+	__u64 cpu_visible_size;
+	/**
+	 * @cpu_visible_used: Estimate of CPU visible memory used, in
+	 * bytes.
+	 *
+	 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable
+	 * accounting. Without this the value here will always equal
+	 * zero.  Note this is only currently tracked for
+	 * DRM_XE_MEM_REGION_CLASS_VRAM regions (for other types the value
+	 * here will always be zero).
+	 */
+	__u64 cpu_visible_used;
+	/** @reserved: Reserved */
+	__u64 reserved[6];
+};
+
+/**
+ * struct drm_xe_query_mem_regions - describe memory regions
+ *
+ * If a query is made with a struct drm_xe_device_query where .query
+ * is equal to DRM_XE_DEVICE_QUERY_MEM_REGIONS, then the reply uses
+ * struct drm_xe_query_mem_regions in .data.
+ */
+struct drm_xe_query_mem_regions {
+	/** @num_mem_regions: number of memory regions returned in @mem_regions */
+	__u32 num_mem_regions;
+	/** @pad: MBZ */
+	__u32 pad;
+	/** @mem_regions: The returned memory regions for this device */
+	struct drm_xe_mem_region mem_regions[];
+};
+
+/**
+ * struct drm_xe_query_config - describe the device configuration
+ *
+ * If a query is made with a struct drm_xe_device_query where .query
+ * is equal to DRM_XE_DEVICE_QUERY_CONFIG, then the reply uses
+ * struct drm_xe_query_config in .data.
+ *
+ * The index in @info can be:
+ *  - %DRM_XE_QUERY_CONFIG_REV_AND_DEVICE_ID - Device ID (lower 16 bits)
+ *    and the device revision (next 8 bits)
+ *  - %DRM_XE_QUERY_CONFIG_FLAGS - Flags describing the device
+ *    configuration, see list below
+ *
+ *    - %DRM_XE_QUERY_CONFIG_FLAG_HAS_VRAM - Flag is set if the device
+ *      has usable VRAM
+ *  - %DRM_XE_QUERY_CONFIG_MIN_ALIGNMENT - Minimal memory alignment
+ *    required by this device, typically SZ_4K or SZ_64K
+ *  - %DRM_XE_QUERY_CONFIG_VA_BITS - Maximum bits of a virtual address
+ *  - %DRM_XE_QUERY_CONFIG_MAX_EXEC_QUEUE_PRIORITY - Value of the highest
+ *    available exec queue priority
+ */
+struct drm_xe_query_config {
+	/** @num_params: number of parameters returned in info */
+	__u32 num_params;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+#define DRM_XE_QUERY_CONFIG_REV_AND_DEVICE_ID	0
+#define DRM_XE_QUERY_CONFIG_FLAGS			1
+	#define DRM_XE_QUERY_CONFIG_FLAG_HAS_VRAM	(1 << 0)
+#define DRM_XE_QUERY_CONFIG_MIN_ALIGNMENT		2
+#define DRM_XE_QUERY_CONFIG_VA_BITS			3
+#define DRM_XE_QUERY_CONFIG_MAX_EXEC_QUEUE_PRIORITY	4
+	/** @info: array of elements containing the config info */
+	__u64 info[];
+};
+
+/**
+ * struct drm_xe_gt - describe an individual GT.
+ *
+ * To be used with drm_xe_query_gt_list, which will return a list with all the
+ * existing GT individual descriptions.
+ * Graphics Technology (GT) is a subset of a GPU/tile that is responsible for
+ * implementing graphics and/or media operations.
+ *
+ * The index in @type can be:
+ *  - %DRM_XE_QUERY_GT_TYPE_MAIN
+ *  - %DRM_XE_QUERY_GT_TYPE_MEDIA
+ */
+struct drm_xe_gt {
+#define DRM_XE_QUERY_GT_TYPE_MAIN		0
+#define DRM_XE_QUERY_GT_TYPE_MEDIA		1
+	/** @type: GT type: Main or Media */
+	__u16 type;
+	/** @tile_id: Tile ID where this GT lives (Information only) */
+	__u16 tile_id;
+	/** @gt_id: Unique ID of this GT within the PCI Device */
+	__u16 gt_id;
+	/** @pad: MBZ */
+	__u16 pad[3];
+	/** @reference_clock: A clock frequency for timestamp */
+	__u32 reference_clock;
+	/**
+	 * @near_mem_regions: Bit mask of instances from
+	 * drm_xe_query_mem_regions that are nearest to the current engines
+	 * of this GT.
+	 * Each index in this mask refers directly to the struct
+	 * drm_xe_query_mem_regions' instance, no assumptions should
+	 * be made about order. The type of each region is described
+	 * by struct drm_xe_query_mem_regions' mem_class.
+	 */
+	__u64 near_mem_regions;
+	/**
+	 * @far_mem_regions: Bit mask of instances from
+	 * drm_xe_query_mem_regions that are far from the engines of this GT.
+	 * In general, they have extra indirections when compared to the
+	 * @near_mem_regions. For a discrete device this could mean system
+	 * memory and memory living in a different tile.
+	 * Each index in this mask refers directly to the struct
+	 * drm_xe_query_mem_regions' instance, no assumptions should
+	 * be made about order. The type of each region is described
+	 * by struct drm_xe_query_mem_regions' mem_class.
+	 */
+	__u64 far_mem_regions;
+	/** @reserved: Reserved */
+	__u64 reserved[8];
+};
+
+/**
+ * struct drm_xe_query_gt_list - A list with GT description items.
+ *
+ * If a query is made with a struct drm_xe_device_query where .query
+ * is equal to DRM_XE_DEVICE_QUERY_GT_LIST, then the reply uses struct
+ * drm_xe_query_gt_list in .data.
+ */
+struct drm_xe_query_gt_list {
+	/** @num_gt: number of GT items returned in gt_list */
+	__u32 num_gt;
+	/** @pad: MBZ */
+	__u32 pad;
+	/** @gt_list: The GT list returned for this device */
+	struct drm_xe_gt gt_list[];
+};
+
+/**
+ * struct drm_xe_query_topology_mask - describe the topology mask of a GT
+ *
+ * This is the hardware topology which reflects the internal physical
+ * structure of the GPU.
+ *
+ * If a query is made with a struct drm_xe_device_query where .query
+ * is equal to DRM_XE_DEVICE_QUERY_GT_TOPOLOGY, then the reply uses
+ * struct drm_xe_query_topology_mask in .data.
+ *
+ * The @type can be:
+ *  - %DRM_XE_TOPO_DSS_GEOMETRY - To query the mask of Dual Sub Slices
+ *    (DSS) available for geometry operations. For example a query response
+ *    containing the following in mask:
+ *    ``DSS_GEOMETRY    ff ff ff ff 00 00 00 00``
+ *    means 32 DSS are available for geometry.
+ *  - %DRM_XE_TOPO_DSS_COMPUTE - To query the mask of Dual Sub Slices
+ *    (DSS) available for compute operations. For example a query response
+ *    containing the following in mask:
+ *    ``DSS_COMPUTE    ff ff ff ff 00 00 00 00``
+ *    means 32 DSS are available for compute.
+ *  - %DRM_XE_TOPO_EU_PER_DSS - To query the mask of Execution Units (EU)
+ *    available per Dual Sub Slices (DSS). For example a query response
+ *    containing the following in mask:
+ *    ``EU_PER_DSS    ff ff 00 00 00 00 00 00``
+ *    means each DSS has 16 EU.
+ */
+struct drm_xe_query_topology_mask {
+	/** @gt_id: GT ID the mask is associated with */
+	__u16 gt_id;
+
+#define DRM_XE_TOPO_DSS_GEOMETRY	(1 << 0)
+#define DRM_XE_TOPO_DSS_COMPUTE		(1 << 1)
+#define DRM_XE_TOPO_EU_PER_DSS		(1 << 2)
+	/** @type: type of mask */
+	__u16 type;
+
+	/** @num_bytes: number of bytes in requested mask */
+	__u32 num_bytes;
+
+	/** @mask: little-endian mask of @num_bytes */
+	__u8 mask[];
+};
+
+/**
+ * struct drm_xe_query_engine_cycles - correlate CPU and GPU timestamps
+ *
+ * If a query is made with a struct drm_xe_device_query where .query is equal to
+ * DRM_XE_DEVICE_QUERY_ENGINE_CYCLES, then the reply uses struct drm_xe_query_engine_cycles
+ * in .data. struct drm_xe_query_engine_cycles is allocated by the user and
+ * .data points to this allocated structure.
+ *
+ * The query returns the engine cycles, which along with GT's @reference_clock,
+ * can be used to calculate the engine timestamp. In addition the
+ * query returns a set of cpu timestamps that indicate when the command
+ * streamer cycle count was captured.
+ */
+struct drm_xe_query_engine_cycles {
+	/**
+	 * @eci: This is input by the user and is the engine for which command
+	 * streamer cycles is queried.
+	 */
+	struct drm_xe_engine_class_instance eci;
+
+	/**
+	 * @clockid: This is input by the user and is the reference clock id for
+	 * CPU timestamp. For definition, see clock_gettime(2) and
+	 * perf_event_open(2). Supported clock ids are CLOCK_MONOTONIC,
+	 * CLOCK_MONOTONIC_RAW, CLOCK_REALTIME, CLOCK_BOOTTIME, CLOCK_TAI.
+	 */
+	__s32 clockid;
+
+	/** @width: Width of the engine cycle counter in bits. */
+	__u32 width;
+
+	/**
+	 * @engine_cycles: Engine cycles as read from its register
+	 * at 0x358 offset.
+	 */
+	__u64 engine_cycles;
+
+	/**
+	 * @cpu_timestamp: CPU timestamp in ns. The timestamp is captured before
+	 * reading the engine_cycles register using the reference clockid set by the
+	 * user.
+	 */
+	__u64 cpu_timestamp;
+
+	/**
+	 * @cpu_delta: Time delta in ns captured around reading the lower dword
+	 * of the engine_cycles register.
+	 */
+	__u64 cpu_delta;
+};
+
+/**
+ * struct drm_xe_device_query - Input of &DRM_IOCTL_XE_DEVICE_QUERY - main
+ * structure to query device information
+ *
+ * The user selects the type of data to query among DRM_XE_DEVICE_QUERY_*
+ * and sets the value in the query member. This determines the type of
+ * the structure provided by the driver in data, among struct drm_xe_query_*.
+ *
+ * The @query can be:
+ *  - %DRM_XE_DEVICE_QUERY_ENGINES
+ *  - %DRM_XE_DEVICE_QUERY_MEM_REGIONS
+ *  - %DRM_XE_DEVICE_QUERY_CONFIG
+ *  - %DRM_XE_DEVICE_QUERY_GT_LIST
+ *  - %DRM_XE_DEVICE_QUERY_HWCONFIG - Query type to retrieve the hardware
+ *    configuration of the device such as information on slices, memory,
+ *    caches, and so on. It is provided as a table of key / value
+ *    attributes.
+ *  - %DRM_XE_DEVICE_QUERY_GT_TOPOLOGY
+ *  - %DRM_XE_DEVICE_QUERY_ENGINE_CYCLES
+ *
+ * If size is set to 0, the driver fills it with the required size for
+ * the requested type of data to query. If size is equal to the required
+ * size, the queried information is copied into data. If size is set to
+ * a value different from 0 and different from the required size, the
+ * IOCTL call returns -EINVAL.
+ *
+ * For example the following code snippet allows retrieving and printing
+ * information about the device engines with DRM_XE_DEVICE_QUERY_ENGINES:
+ *
+ * .. code-block:: C
+ *
+ *     struct drm_xe_query_engines *engines;
+ *     struct drm_xe_device_query query = {
+ *         .extensions = 0,
+ *         .query = DRM_XE_DEVICE_QUERY_ENGINES,
+ *         .size = 0,
+ *         .data = 0,
+ *     };
+ *     ioctl(fd, DRM_IOCTL_XE_DEVICE_QUERY, &query);
+ *     engines = malloc(query.size);
+ *     query.data = (uintptr_t)engines;
+ *     ioctl(fd, DRM_IOCTL_XE_DEVICE_QUERY, &query);
+ *     for (int i = 0; i < engines->num_engines; i++) {
+ *         printf("Engine %d: %s\n", i,
+ *             engines->engines[i].instance.engine_class ==
+ *                 DRM_XE_ENGINE_CLASS_RENDER ? "RENDER":
+ *             engines->engines[i].instance.engine_class ==
+ *                 DRM_XE_ENGINE_CLASS_COPY ? "COPY":
+ *             engines->engines[i].instance.engine_class ==
+ *                 DRM_XE_ENGINE_CLASS_VIDEO_DECODE ? "VIDEO_DECODE":
+ *             engines->engines[i].instance.engine_class ==
+ *                 DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE ? "VIDEO_ENHANCE":
+ *             engines->engines[i].instance.engine_class ==
+ *                 DRM_XE_ENGINE_CLASS_COMPUTE ? "COMPUTE":
+ *             "UNKNOWN");
+ *     }
+ *     free(engines);
+ */
+struct drm_xe_device_query {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+#define DRM_XE_DEVICE_QUERY_ENGINES		0
+#define DRM_XE_DEVICE_QUERY_MEM_REGIONS		1
+#define DRM_XE_DEVICE_QUERY_CONFIG		2
+#define DRM_XE_DEVICE_QUERY_GT_LIST		3
+#define DRM_XE_DEVICE_QUERY_HWCONFIG		4
+#define DRM_XE_DEVICE_QUERY_GT_TOPOLOGY		5
+#define DRM_XE_DEVICE_QUERY_ENGINE_CYCLES	6
+	/** @query: The type of data to query */
+	__u32 query;
+
+	/** @size: Size of the queried data */
+	__u32 size;
+
+	/** @data: Queried data is placed here */
+	__u64 data;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_gem_create - Input of &DRM_IOCTL_XE_GEM_CREATE - A structure for
+ * gem creation
+ *
+ * The @flags can be:
+ *  - %DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING
+ *  - %DRM_XE_GEM_CREATE_FLAG_SCANOUT
+ *  - %DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM - When using VRAM as a
+ *    possible placement, ensure that the corresponding VRAM allocation
+ *    will always use the CPU accessible part of VRAM. This is important
+ *    for small-bar systems (on full-bar systems this gets turned into a
+ *    noop).
+ *    Note1: System memory can be used as an extra placement if the kernel
+ *    should spill the allocation to system memory, if space can't be made
+ *    available in the CPU accessible part of VRAM (giving the same
+ *    behaviour as the i915 interface, see
+ *    I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS).
+ *    Note2: For clear-color CCS surfaces the kernel needs to read the
+ *    clear-color value stored in the buffer, and on discrete platforms we
+ *    need to use VRAM for display surfaces, therefore the kernel requires
+ *    setting this flag for such objects, otherwise an error is thrown on
+ *    small-bar systems.
+ *
+ * @cpu_caching supports the following values:
+ *  - %DRM_XE_GEM_CPU_CACHING_WB - Allocate the pages with write-back
+ *    caching. On iGPU this can't be used for scanout surfaces. Currently
+ *    not allowed for objects placed in VRAM.
+ *  - %DRM_XE_GEM_CPU_CACHING_WC - Allocate the pages as write-combined. This
+ *    is uncached. Scanout surfaces should likely use this. All objects
+ *    that can be placed in VRAM must use this.
+ */
+struct drm_xe_gem_create {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/**
+	 * @size: Size of the object to be created, must match region
+	 * (system or vram) minimum alignment (&min_page_size).
+	 */
+	__u64 size;
+
+	/**
+	 * @placement: A mask of memory instances of where BO can be placed.
+	 * Each index in this mask refers directly to the struct
+	 * drm_xe_query_mem_regions' instance, no assumptions should
+	 * be made about order. The type of each region is described
+	 * by struct drm_xe_query_mem_regions' mem_class.
+	 */
+	__u32 placement;
+
+#define DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING		(1 << 0)
+#define DRM_XE_GEM_CREATE_FLAG_SCANOUT			(1 << 1)
+#define DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM	(1 << 2)
+	/**
+	 * @flags: Flags, currently a mask of memory instances of where BO can
+	 * be placed
+	 */
+	__u32 flags;
+
+	/**
+	 * @vm_id: Attached VM, if any
+	 *
+	 * If a VM is specified, this BO must:
+	 *
+	 *  1. Only ever be bound to that VM.
+	 *  2. Cannot be exported as a PRIME fd.
+	 */
+	__u32 vm_id;
+
+	/**
+	 * @handle: Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+
+#define DRM_XE_GEM_CPU_CACHING_WB                      1
+#define DRM_XE_GEM_CPU_CACHING_WC                      2
+	/**
+	 * @cpu_caching: The CPU caching mode to select for this object. If
+	 * mmaping the object the mode selected here will also be used.
+	 */
+	__u16 cpu_caching;
+	/** @pad: MBZ */
+	__u16 pad[3];
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_gem_mmap_offset - Input of &DRM_IOCTL_XE_GEM_MMAP_OFFSET
+ */
+struct drm_xe_gem_mmap_offset {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/** @handle: Handle for the object being mapped. */
+	__u32 handle;
+
+	/** @flags: Must be zero */
+	__u32 flags;
+
+	/** @offset: The fake offset to use for subsequent mmap call */
+	__u64 offset;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_vm_create - Input of &DRM_IOCTL_XE_VM_CREATE
+ *
+ * The @flags can be:
+ *  - %DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE
+ *  - %DRM_XE_VM_CREATE_FLAG_LR_MODE - An LR, or Long Running VM accepts
+ *    exec submissions to its exec_queues that don't have an upper time
+ *    limit on the job execution time. But exec submissions to these
+ *    don't allow any of the flags DRM_XE_SYNC_FLAG_SYNCOBJ,
+ *    DRM_XE_SYNC_FLAG_TIMELINE_SYNCOBJ, DRM_XE_SYNC_FLAG_DMA_BUF,
+ *    used as out-syncobjs, that is, together with DRM_XE_SYNC_FLAG_SIGNAL.
+ *    LR VMs can be created in recoverable page-fault mode using
+ *    DRM_XE_VM_CREATE_FLAG_FAULT_MODE, if the device supports it.
+ *    If that flag is omitted, the UMD can not rely on the slightly
+ *    different per-VM overcommit semantics that are enabled by
+ *    DRM_XE_VM_CREATE_FLAG_FAULT_MODE (see below), but KMD may
+ *    still enable recoverable pagefaults if supported by the device.
+ *  - %DRM_XE_VM_CREATE_FLAG_FAULT_MODE - Requires also
+ *    DRM_XE_VM_CREATE_FLAG_LR_MODE. It allows memory to be allocated on
+ *    demand when accessed, and also allows per-VM overcommit of memory.
+ *    The xe driver internally uses recoverable pagefaults to implement
+ *    this.
+ */
+struct drm_xe_vm_create {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+#define DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE	(1 << 0)
+#define DRM_XE_VM_CREATE_FLAG_LR_MODE	        (1 << 1)
+#define DRM_XE_VM_CREATE_FLAG_FAULT_MODE	(1 << 2)
+	/** @flags: Flags */
+	__u32 flags;
+
+	/** @vm_id: Returned VM ID */
+	__u32 vm_id;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_vm_destroy - Input of &DRM_IOCTL_XE_VM_DESTROY
+ */
+struct drm_xe_vm_destroy {
+	/** @vm_id: VM ID */
+	__u32 vm_id;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_vm_bind_op - run bind operations
+ *
+ * The @op can be:
+ *  - %DRM_XE_VM_BIND_OP_MAP
+ *  - %DRM_XE_VM_BIND_OP_UNMAP
+ *  - %DRM_XE_VM_BIND_OP_MAP_USERPTR
+ *  - %DRM_XE_VM_BIND_OP_UNMAP_ALL
+ *  - %DRM_XE_VM_BIND_OP_PREFETCH
+ *
+ * and the @flags can be:
+ *  - %DRM_XE_VM_BIND_FLAG_NULL - When the NULL flag is set, the page
+ *    tables are setup with a special bit which indicates writes are
+ *    dropped and all reads return zero. In the future, the NULL flags
+ *    will only be valid for DRM_XE_VM_BIND_OP_MAP operations, the BO
+ *    handle MBZ, and the BO offset MBZ. This flag is intended to
+ *    implement VK sparse bindings.
+ */
+struct drm_xe_vm_bind_op {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/**
+	 * @obj: GEM object to operate on, MBZ for MAP_USERPTR, MBZ for UNMAP
+	 */
+	__u32 obj;
+
+	/**
+	 * @pat_index: The platform defined @pat_index to use for this mapping.
+	 * The index basically maps to some predefined memory attributes,
+	 * including things like caching, coherency, compression etc.  The exact
+	 * meaning of the pat_index is platform specific and defined in the
+	 * Bspec and PRMs.  When the KMD sets up the binding the index here is
+	 * encoded into the ppGTT PTE.
+	 *
+	 * For coherency the @pat_index needs to be at least 1way coherent when
+	 * drm_xe_gem_create.cpu_caching is DRM_XE_GEM_CPU_CACHING_WB. The KMD
+	 * will extract the coherency mode from the @pat_index and reject if
+	 * there is a mismatch (see note below for pre-MTL platforms).
+	 *
+	 * Note: On pre-MTL platforms there is only a caching mode and no
+	 * explicit coherency mode, but on such hardware there is always a
+	 * shared-LLC (or is dgpu) so all GT memory accesses are coherent with
+	 * CPU caches even with the caching mode set as uncached.  It's only the
+	 * display engine that is incoherent (on dgpu it must be in VRAM which
+	 * is always mapped as WC on the CPU). However to keep the uapi somewhat
+	 * consistent with newer platforms the KMD groups the different cache
+	 * levels into the following coherency buckets on all pre-MTL platforms:
+	 *
+	 *	ppGTT UC -> COH_NONE
+	 *	ppGTT WC -> COH_NONE
+	 *	ppGTT WT -> COH_NONE
+	 *	ppGTT WB -> COH_AT_LEAST_1WAY
+	 *
+	 * In practice UC/WC/WT should only ever used for scanout surfaces on
+	 * such platforms (or perhaps in general for dma-buf if shared with
+	 * another device) since it is only the display engine that is actually
+	 * incoherent.  Everything else should typically use WB given that we
+	 * have a shared-LLC.  On MTL+ this completely changes and the HW
+	 * defines the coherency mode as part of the @pat_index, where
+	 * incoherent GT access is possible.
+	 *
+	 * Note: For userptr and externally imported dma-buf the kernel expects
+	 * either 1WAY or 2WAY for the @pat_index.
+	 *
+	 * For DRM_XE_VM_BIND_FLAG_NULL bindings there are no KMD restrictions
+	 * on the @pat_index. For such mappings there is no actual memory being
+	 * mapped (the address in the PTE is invalid), so the various PAT memory
+	 * attributes likely do not apply.  Simply leaving as zero is one
+	 * option (still a valid pat_index).
+	 */
+	__u16 pat_index;
+
+	/** @pad: MBZ */
+	__u16 pad;
+
+	union {
+		/**
+		 * @obj_offset: Offset into the object, MBZ for CLEAR_RANGE,
+		 * ignored for unbind
+		 */
+		__u64 obj_offset;
+
+		/** @userptr: user pointer to bind on */
+		__u64 userptr;
+	};
+
+	/**
+	 * @range: Number of bytes from the object to bind to addr, MBZ for UNMAP_ALL
+	 */
+	__u64 range;
+
+	/** @addr: Address to operate on, MBZ for UNMAP_ALL */
+	__u64 addr;
+
+#define DRM_XE_VM_BIND_OP_MAP		0x0
+#define DRM_XE_VM_BIND_OP_UNMAP		0x1
+#define DRM_XE_VM_BIND_OP_MAP_USERPTR	0x2
+#define DRM_XE_VM_BIND_OP_UNMAP_ALL	0x3
+#define DRM_XE_VM_BIND_OP_PREFETCH	0x4
+	/** @op: Bind operation to perform */
+	__u32 op;
+
+#define DRM_XE_VM_BIND_FLAG_NULL	(1 << 2)
+#define DRM_XE_VM_BIND_FLAG_DUMPABLE	(1 << 3)
+	/** @flags: Bind flags */
+	__u32 flags;
+
+	/**
+	 * @prefetch_mem_region_instance: Memory region to prefetch VMA to.
+	 * It is a region instance, not a mask.
+	 * To be used only with %DRM_XE_VM_BIND_OP_PREFETCH operation.
+	 */
+	__u32 prefetch_mem_region_instance;
+
+	/** @pad2: MBZ */
+	__u32 pad2;
+
+	/** @reserved: Reserved */
+	__u64 reserved[3];
+};
+
+/**
+ * struct drm_xe_vm_bind - Input of &DRM_IOCTL_XE_VM_BIND
+ *
+ * Below is an example of a minimal use of @drm_xe_vm_bind to
+ * asynchronously bind the buffer `data` at address `BIND_ADDRESS` to
+ * illustrate `userptr`. It can be synchronized by using the example
+ * provided for @drm_xe_sync.
+ *
+ * .. code-block:: C
+ *
+ *     data = aligned_alloc(ALIGNMENT, BO_SIZE);
+ *     struct drm_xe_vm_bind bind = {
+ *         .vm_id = vm,
+ *         .num_binds = 1,
+ *         .bind.obj = 0,
+ *         .bind.obj_offset = to_user_pointer(data),
+ *         .bind.range = BO_SIZE,
+ *         .bind.addr = BIND_ADDRESS,
+ *         .bind.op = DRM_XE_VM_BIND_OP_MAP_USERPTR,
+ *         .bind.flags = 0,
+ *         .num_syncs = 1,
+ *         .syncs = &sync,
+ *         .exec_queue_id = 0,
+ *     };
+ *     ioctl(fd, DRM_IOCTL_XE_VM_BIND, &bind);
+ *
+ */
+struct drm_xe_vm_bind {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/** @vm_id: The ID of the VM to bind to */
+	__u32 vm_id;
+
+	/**
+	 * @exec_queue_id: exec_queue_id, must be of class DRM_XE_ENGINE_CLASS_VM_BIND
+	 * and exec queue must have same vm_id. If zero, the default VM bind engine
+	 * is used.
+	 */
+	__u32 exec_queue_id;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+	/** @num_binds: number of binds in this IOCTL */
+	__u32 num_binds;
+
+	union {
+		/** @bind: used if num_binds == 1 */
+		struct drm_xe_vm_bind_op bind;
+
+		/**
+		 * @vector_of_binds: userptr to array of struct
+		 * drm_xe_vm_bind_op if num_binds > 1
+		 */
+		__u64 vector_of_binds;
+	};
+
+	/** @pad2: MBZ */
+	__u32 pad2;
+
+	/** @num_syncs: amount of syncs to wait on */
+	__u32 num_syncs;
+
+	/** @syncs: pointer to struct drm_xe_sync array */
+	__u64 syncs;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_exec_queue_create - Input of &DRM_IOCTL_XE_EXEC_QUEUE_CREATE
+ *
+ * The example below shows how to use @drm_xe_exec_queue_create to create
+ * a simple exec_queue (no parallel submission) of class
+ * &DRM_XE_ENGINE_CLASS_RENDER.
+ *
+ * .. code-block:: C
+ *
+ *     struct drm_xe_engine_class_instance instance = {
+ *         .engine_class = DRM_XE_ENGINE_CLASS_RENDER,
+ *     };
+ *     struct drm_xe_exec_queue_create exec_queue_create = {
+ *          .extensions = 0,
+ *          .vm_id = vm,
+ *          .num_bb_per_exec = 1,
+ *          .num_eng_per_bb = 1,
+ *          .instances = to_user_pointer(&instance),
+ *     };
+ *     ioctl(fd, DRM_IOCTL_XE_EXEC_QUEUE_CREATE, &exec_queue_create);
+ *
+ */
+struct drm_xe_exec_queue_create {
+#define DRM_XE_EXEC_QUEUE_EXTENSION_SET_PROPERTY		0
+#define   DRM_XE_EXEC_QUEUE_SET_PROPERTY_PRIORITY		0
+#define   DRM_XE_EXEC_QUEUE_SET_PROPERTY_TIMESLICE		1
+
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/** @width: submission width (number BB per exec) for this exec queue */
+	__u16 width;
+
+	/** @num_placements: number of valid placements for this exec queue */
+	__u16 num_placements;
+
+	/** @vm_id: VM to use for this exec queue */
+	__u32 vm_id;
+
+	/** @flags: MBZ */
+	__u32 flags;
+
+	/** @exec_queue_id: Returned exec queue ID */
+	__u32 exec_queue_id;
+
+	/**
+	 * @instances: user pointer to a 2-d array of struct
+	 * drm_xe_engine_class_instance
+	 *
+	 * length = width (i) * num_placements (j)
+	 * index = j + i * width
+	 */
+	__u64 instances;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_exec_queue_destroy - Input of &DRM_IOCTL_XE_EXEC_QUEUE_DESTROY
+ */
+struct drm_xe_exec_queue_destroy {
+	/** @exec_queue_id: Exec queue ID */
+	__u32 exec_queue_id;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_exec_queue_get_property - Input of &DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY
+ *
+ * The @property can be:
+ *  - %DRM_XE_EXEC_QUEUE_GET_PROPERTY_BAN
+ */
+struct drm_xe_exec_queue_get_property {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/** @exec_queue_id: Exec queue ID */
+	__u32 exec_queue_id;
+
+#define DRM_XE_EXEC_QUEUE_GET_PROPERTY_BAN	0
+	/** @property: property to get */
+	__u32 property;
+
+	/** @value: property value */
+	__u64 value;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_sync - sync object
+ *
+ * The @type can be:
+ *  - %DRM_XE_SYNC_TYPE_SYNCOBJ
+ *  - %DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ
+ *  - %DRM_XE_SYNC_TYPE_USER_FENCE
+ *
+ * and the @flags can be:
+ *  - %DRM_XE_SYNC_FLAG_SIGNAL
+ *
+ * A minimal use of @drm_xe_sync looks like this:
+ *
+ * .. code-block:: C
+ *
+ *     struct drm_xe_sync sync = {
+ *         .flags = DRM_XE_SYNC_FLAG_SIGNAL,
+ *         .type = DRM_XE_SYNC_TYPE_SYNCOBJ,
+ *     };
+ *     struct drm_syncobj_create syncobj_create = { 0 };
+ *     ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &syncobj_create);
+ *     sync.handle = syncobj_create.handle;
+ *         ...
+ *         use of &sync in drm_xe_exec or drm_xe_vm_bind
+ *         ...
+ *     struct drm_syncobj_wait wait = {
+ *         .handles = &sync.handle,
+ *         .timeout_nsec = INT64_MAX,
+ *         .count_handles = 1,
+ *         .flags = 0,
+ *         .first_signaled = 0,
+ *         .pad = 0,
+ *     };
+ *     ioctl(fd, DRM_IOCTL_SYNCOBJ_WAIT, &wait);
+ */
+struct drm_xe_sync {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+#define DRM_XE_SYNC_TYPE_SYNCOBJ		0x0
+#define DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ	0x1
+#define DRM_XE_SYNC_TYPE_USER_FENCE		0x2
+	/** @type: Type of the this sync object */
+	__u32 type;
+
+#define DRM_XE_SYNC_FLAG_SIGNAL	(1 << 0)
+	/** @flags: Sync Flags */
+	__u32 flags;
+
+	union {
+		/** @handle: Handle for the object */
+		__u32 handle;
+
+		/**
+		 * @addr: Address of user fence. When sync is passed in via exec
+		 * IOCTL this is a GPU address in the VM. When sync passed in via
+		 * VM bind IOCTL this is a user pointer. In either case, it is
+		 * the users responsibility that this address is present and
+		 * mapped when the user fence is signalled. Must be qword
+		 * aligned.
+		 */
+		__u64 addr;
+	};
+
+	/**
+	 * @timeline_value: Input for the timeline sync object. Needs to be
+	 * different than 0 when used with %DRM_XE_SYNC_FLAG_TIMELINE_SYNCOBJ.
+	 */
+	__u64 timeline_value;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_exec - Input of &DRM_IOCTL_XE_EXEC
+ *
+ * This is an example to use @drm_xe_exec for execution of the object
+ * at BIND_ADDRESS (see example in @drm_xe_vm_bind) by an exec_queue
+ * (see example in @drm_xe_exec_queue_create). It can be synchronized
+ * by using the example provided for @drm_xe_sync.
+ *
+ * .. code-block:: C
+ *
+ *     struct drm_xe_exec exec = {
+ *         .exec_queue_id = exec_queue,
+ *         .syncs = &sync,
+ *         .num_syncs = 1,
+ *         .address = BIND_ADDRESS,
+ *         .num_batch_buffer = 1,
+ *     };
+ *     ioctl(fd, DRM_IOCTL_XE_EXEC, &exec);
+ *
+ */
+struct drm_xe_exec {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/** @exec_queue_id: Exec queue ID for the batch buffer */
+	__u32 exec_queue_id;
+
+	/** @num_syncs: Amount of struct drm_xe_sync in array. */
+	__u32 num_syncs;
+
+	/** @syncs: Pointer to struct drm_xe_sync array. */
+	__u64 syncs;
+
+	/**
+	 * @address: address of batch buffer if num_batch_buffer == 1 or an
+	 * array of batch buffer addresses
+	 */
+	__u64 address;
+
+	/**
+	 * @num_batch_buffer: number of batch buffer in this exec, must match
+	 * the width of the engine
+	 */
+	__u16 num_batch_buffer;
+
+	/** @pad: MBZ */
+	__u16 pad[3];
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+/**
+ * struct drm_xe_wait_user_fence - Input of &DRM_IOCTL_XE_WAIT_USER_FENCE
+ *
+ * Wait on user fence, XE will wake-up on every HW engine interrupt in the
+ * instances list and check if user fence is complete::
+ *
+ *	(*addr & MASK) OP (VALUE & MASK)
+ *
+ * Returns to user on user fence completion or timeout.
+ *
+ * The @op can be:
+ *  - %DRM_XE_UFENCE_WAIT_OP_EQ
+ *  - %DRM_XE_UFENCE_WAIT_OP_NEQ
+ *  - %DRM_XE_UFENCE_WAIT_OP_GT
+ *  - %DRM_XE_UFENCE_WAIT_OP_GTE
+ *  - %DRM_XE_UFENCE_WAIT_OP_LT
+ *  - %DRM_XE_UFENCE_WAIT_OP_LTE
+ *
+ * and the @flags can be:
+ *  - %DRM_XE_UFENCE_WAIT_FLAG_ABSTIME
+ *  - %DRM_XE_UFENCE_WAIT_FLAG_SOFT_OP
+ *
+ * The @mask values can be for example:
+ *  - 0xffu for u8
+ *  - 0xffffu for u16
+ *  - 0xffffffffu for u32
+ *  - 0xffffffffffffffffu for u64
+ */
+struct drm_xe_wait_user_fence {
+	/** @extensions: Pointer to the first extension struct, if any */
+	__u64 extensions;
+
+	/**
+	 * @addr: user pointer address to wait on, must qword aligned
+	 */
+	__u64 addr;
+
+#define DRM_XE_UFENCE_WAIT_OP_EQ	0x0
+#define DRM_XE_UFENCE_WAIT_OP_NEQ	0x1
+#define DRM_XE_UFENCE_WAIT_OP_GT	0x2
+#define DRM_XE_UFENCE_WAIT_OP_GTE	0x3
+#define DRM_XE_UFENCE_WAIT_OP_LT	0x4
+#define DRM_XE_UFENCE_WAIT_OP_LTE	0x5
+	/** @op: wait operation (type of comparison) */
+	__u16 op;
+
+#define DRM_XE_UFENCE_WAIT_FLAG_ABSTIME	(1 << 0)
+	/** @flags: wait flags */
+	__u16 flags;
+
+	/** @pad: MBZ */
+	__u32 pad;
+
+	/** @value: compare value */
+	__u64 value;
+
+	/** @mask: comparison mask */
+	__u64 mask;
+
+	/**
+	 * @timeout: how long to wait before bailing, value in nanoseconds.
+	 * Without DRM_XE_UFENCE_WAIT_FLAG_ABSTIME flag set (relative timeout)
+	 * it contains timeout expressed in nanoseconds to wait (fence will
+	 * expire at now() + timeout).
+	 * When DRM_XE_UFENCE_WAIT_FLAG_ABSTIME flat is set (absolute timeout) wait
+	 * will end at timeout (uses system MONOTONIC_CLOCK).
+	 * Passing negative timeout leads to neverending wait.
+	 *
+	 * On relative timeout this value is updated with timeout left
+	 * (for restarting the call in case of signal delivery).
+	 * On absolute timeout this value stays intact (restarted call still
+	 * expire at the same point of time).
+	 */
+	__s64 timeout;
+
+	/** @exec_queue_id: exec_queue_id returned from xe_exec_queue_create_ioctl */
+	__u32 exec_queue_id;
+
+	/** @pad2: MBZ */
+	__u32 pad2;
+
+	/** @reserved: Reserved */
+	__u64 reserved[2];
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _UAPI_XE_DRM_H_ */
diff --git a/original/uapi/linux/android/binder.h b/original/uapi/linux/android/binder.h
index f068f62..e67742d 100644
--- a/original/uapi/linux/android/binder.h
+++ b/original/uapi/linux/android/binder.h
@@ -299,20 +299,22 @@ struct binder_extended_error {
 	__s32	param;
 };
 
-#define BINDER_WRITE_READ		_IOWR('b', 1, struct binder_write_read)
-#define BINDER_SET_IDLE_TIMEOUT		_IOW('b', 3, __s64)
-#define BINDER_SET_MAX_THREADS		_IOW('b', 5, __u32)
-#define BINDER_SET_IDLE_PRIORITY	_IOW('b', 6, __s32)
-#define BINDER_SET_CONTEXT_MGR		_IOW('b', 7, __s32)
-#define BINDER_THREAD_EXIT		_IOW('b', 8, __s32)
-#define BINDER_VERSION			_IOWR('b', 9, struct binder_version)
-#define BINDER_GET_NODE_DEBUG_INFO	_IOWR('b', 11, struct binder_node_debug_info)
-#define BINDER_GET_NODE_INFO_FOR_REF	_IOWR('b', 12, struct binder_node_info_for_ref)
-#define BINDER_SET_CONTEXT_MGR_EXT	_IOW('b', 13, struct flat_binder_object)
-#define BINDER_FREEZE			_IOW('b', 14, struct binder_freeze_info)
-#define BINDER_GET_FROZEN_INFO		_IOWR('b', 15, struct binder_frozen_status_info)
-#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION	_IOW('b', 16, __u32)
-#define BINDER_GET_EXTENDED_ERROR	_IOWR('b', 17, struct binder_extended_error)
+enum {
+	BINDER_WRITE_READ		= _IOWR('b', 1, struct binder_write_read),
+	BINDER_SET_IDLE_TIMEOUT		= _IOW('b', 3, __s64),
+	BINDER_SET_MAX_THREADS		= _IOW('b', 5, __u32),
+	BINDER_SET_IDLE_PRIORITY	= _IOW('b', 6, __s32),
+	BINDER_SET_CONTEXT_MGR		= _IOW('b', 7, __s32),
+	BINDER_THREAD_EXIT		= _IOW('b', 8, __s32),
+	BINDER_VERSION			= _IOWR('b', 9, struct binder_version),
+	BINDER_GET_NODE_DEBUG_INFO	= _IOWR('b', 11, struct binder_node_debug_info),
+	BINDER_GET_NODE_INFO_FOR_REF	= _IOWR('b', 12, struct binder_node_info_for_ref),
+	BINDER_SET_CONTEXT_MGR_EXT	= _IOW('b', 13, struct flat_binder_object),
+	BINDER_FREEZE			= _IOW('b', 14, struct binder_freeze_info),
+	BINDER_GET_FROZEN_INFO		= _IOWR('b', 15, struct binder_frozen_status_info),
+	BINDER_ENABLE_ONEWAY_SPAM_DETECTION	= _IOW('b', 16, __u32),
+	BINDER_GET_EXTENDED_ERROR	= _IOWR('b', 17, struct binder_extended_error),
+};
 
 /*
  * NOTE: Two special error codes you should check for when calling
diff --git a/original/uapi/linux/batadv_packet.h b/original/uapi/linux/batadv_packet.h
index 9204e44..6e25753 100644
--- a/original/uapi/linux/batadv_packet.h
+++ b/original/uapi/linux/batadv_packet.h
@@ -116,6 +116,9 @@ enum batadv_icmp_packettype {
  * only need routable IPv4 multicast packets we signed up for explicitly
  * @BATADV_MCAST_WANT_NO_RTR6: we have no IPv6 multicast router and therefore
  * only need routable IPv6 multicast packets we signed up for explicitly
+ * @BATADV_MCAST_HAVE_MC_PTYPE_CAPA: we can parse, receive and forward
+ * batman-adv multicast packets with a multicast tracker TVLV. And all our
+ * hard interfaces have an MTU of at least 1280 bytes.
  */
 enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_UNSNOOPABLES	= 1UL << 0,
@@ -123,6 +126,7 @@ enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_IPV6		= 1UL << 2,
 	BATADV_MCAST_WANT_NO_RTR4		= 1UL << 3,
 	BATADV_MCAST_WANT_NO_RTR6		= 1UL << 4,
+	BATADV_MCAST_HAVE_MC_PTYPE_CAPA		= 1UL << 5,
 };
 
 /* tt data subtypes */
@@ -174,14 +178,16 @@ enum batadv_bla_claimframe {
  * @BATADV_TVLV_TT: translation table tvlv
  * @BATADV_TVLV_ROAM: roaming advertisement tvlv
  * @BATADV_TVLV_MCAST: multicast capability tvlv
+ * @BATADV_TVLV_MCAST_TRACKER: multicast tracker tvlv
  */
 enum batadv_tvlv_type {
-	BATADV_TVLV_GW		= 0x01,
-	BATADV_TVLV_DAT		= 0x02,
-	BATADV_TVLV_NC		= 0x03,
-	BATADV_TVLV_TT		= 0x04,
-	BATADV_TVLV_ROAM	= 0x05,
-	BATADV_TVLV_MCAST	= 0x06,
+	BATADV_TVLV_GW			= 0x01,
+	BATADV_TVLV_DAT			= 0x02,
+	BATADV_TVLV_NC			= 0x03,
+	BATADV_TVLV_TT			= 0x04,
+	BATADV_TVLV_ROAM		= 0x05,
+	BATADV_TVLV_MCAST		= 0x06,
+	BATADV_TVLV_MCAST_TRACKER	= 0x07,
 };
 
 #pragma pack(2)
@@ -488,6 +494,25 @@ struct batadv_bcast_packet {
 };
 
 /**
+ * struct batadv_mcast_packet - multicast packet for network payload
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the general header
+ * @ttl: time to live for this packet, part of the general header
+ * @reserved: reserved byte for alignment
+ * @tvlv_len: length of the appended tvlv buffer (in bytes)
+ */
+struct batadv_mcast_packet {
+	__u8 packet_type;
+	__u8 version;
+	__u8 ttl;
+	__u8 reserved;
+	__be16 tvlv_len;
+	/* "4 bytes boundary + 2 bytes" long to make the payload after the
+	 * following ethernet header again 4 bytes boundary aligned
+	 */
+};
+
+/**
  * struct batadv_coded_packet - network coded packet
  * @packet_type: batman-adv packet type, part of the general header
  * @version: batman-adv protocol version, part of the general header
@@ -628,6 +653,14 @@ struct batadv_tvlv_mcast_data {
 	__u8 reserved[3];
 };
 
+/**
+ * struct batadv_tvlv_mcast_tracker - payload of a multicast tracker tvlv
+ * @num_dests: number of subsequent destination originator MAC addresses
+ */
+struct batadv_tvlv_mcast_tracker {
+	__be16	num_dests;
+};
+
 #pragma pack()
 
 #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */
diff --git a/original/uapi/linux/bpf.h b/original/uapi/linux/bpf.h
index 0f6cdf5..754e68c 100644
--- a/original/uapi/linux/bpf.h
+++ b/original/uapi/linux/bpf.h
@@ -1074,9 +1074,11 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
-	MAX_BPF_LINK_TYPE,
+	__MAX_BPF_LINK_TYPE,
 };
 
+#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
+
 enum bpf_perf_event_type {
 	BPF_PERF_EVENT_UNSPEC = 0,
 	BPF_PERF_EVENT_UPROBE = 1,
@@ -1200,6 +1202,9 @@ enum bpf_perf_event_type {
  */
 #define BPF_F_XDP_DEV_BOUND_ONLY	(1U << 6)
 
+/* The verifier internal test flag. Behavior is undefined */
+#define BPF_F_TEST_REG_INVARIANTS	(1U << 7)
+
 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
  * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
  */
@@ -4517,6 +4522,8 @@ union bpf_attr {
  * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
  *	Description
  *		Return a user or a kernel stack in bpf program provided buffer.
+ *		Note: the user stack will only be populated if the *task* is
+ *		the current task; all other tasks will return -EOPNOTSUPP.
  *		To achieve this, the helper needs *task*, which is a valid
  *		pointer to **struct task_struct**. To store the stacktrace, the
  *		bpf program provides *buf* with a nonnegative *size*.
@@ -4528,6 +4535,7 @@ union bpf_attr {
  *
  *		**BPF_F_USER_STACK**
  *			Collect a user space stack instead of a kernel stack.
+ *			The *task* must be the current task.
  *		**BPF_F_USER_BUILD_ID**
  *			Collect buildid+offset instead of ips for user stack,
  *			only valid if **BPF_F_USER_STACK** is also specified.
@@ -6557,6 +6565,16 @@ struct bpf_link_info {
 			__u64 missed;
 		} kprobe_multi;
 		struct {
+			__aligned_u64 path;
+			__aligned_u64 offsets;
+			__aligned_u64 ref_ctr_offsets;
+			__aligned_u64 cookies;
+			__u32 path_size; /* in/out: real path size on success, including zero byte */
+			__u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */
+			__u32 flags;
+			__u32 pid;
+		} uprobe_multi;
+		struct {
 			__u32 type; /* enum bpf_perf_event_type */
 			__u32 :32;
 			union {
@@ -6886,6 +6904,7 @@ enum {
 	BPF_TCP_LISTEN,
 	BPF_TCP_CLOSING,	/* Now a valid state */
 	BPF_TCP_NEW_SYN_RECV,
+	BPF_TCP_BOUND_INACTIVE,
 
 	BPF_TCP_MAX_STATES	/* Leave at the end! */
 };
@@ -7151,40 +7170,31 @@ struct bpf_spin_lock {
 };
 
 struct bpf_timer {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_dynptr {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_head {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[3];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_root {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[4];
 } __attribute__((aligned(8)));
 
 struct bpf_refcount {
-	__u32 :32;
+	__u32 __opaque[1];
 } __attribute__((aligned(4)));
 
 struct bpf_sysctl {
diff --git a/original/uapi/linux/bpfilter.h b/original/uapi/linux/bpfilter.h
deleted file mode 100644
index cbc1f58..0000000
--- a/original/uapi/linux/bpfilter.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI_LINUX_BPFILTER_H
-#define _UAPI_LINUX_BPFILTER_H
-
-#include <linux/if.h>
-
-enum {
-	BPFILTER_IPT_SO_SET_REPLACE = 64,
-	BPFILTER_IPT_SO_SET_ADD_COUNTERS = 65,
-	BPFILTER_IPT_SET_MAX,
-};
-
-enum {
-	BPFILTER_IPT_SO_GET_INFO = 64,
-	BPFILTER_IPT_SO_GET_ENTRIES = 65,
-	BPFILTER_IPT_SO_GET_REVISION_MATCH = 66,
-	BPFILTER_IPT_SO_GET_REVISION_TARGET = 67,
-	BPFILTER_IPT_GET_MAX,
-};
-
-#endif /* _UAPI_LINUX_BPFILTER_H */
diff --git a/original/uapi/linux/btrfs.h b/original/uapi/linux/btrfs.h
index 7c29d82..f8bc34a 100644
--- a/original/uapi/linux/btrfs.h
+++ b/original/uapi/linux/btrfs.h
@@ -614,6 +614,9 @@ struct btrfs_ioctl_clone_range_args {
  */
 #define BTRFS_DEFRAG_RANGE_COMPRESS 1
 #define BTRFS_DEFRAG_RANGE_START_IO 2
+#define BTRFS_DEFRAG_RANGE_FLAGS_SUPP	(BTRFS_DEFRAG_RANGE_COMPRESS |		\
+					 BTRFS_DEFRAG_RANGE_START_IO)
+
 struct btrfs_ioctl_defrag_range_args {
 	/* start of the defrag operation */
 	__u64 start;
diff --git a/original/uapi/linux/cxl_mem.h b/original/uapi/linux/cxl_mem.h
index 14bc6e7..42066f4 100644
--- a/original/uapi/linux/cxl_mem.h
+++ b/original/uapi/linux/cxl_mem.h
@@ -46,6 +46,7 @@
 	___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"),         \
 	___DEPRECATED(SCAN_MEDIA, "Scan Media"),                          \
 	___DEPRECATED(GET_SCAN_MEDIA, "Get Scan Media Results"),          \
+	___C(GET_TIMESTAMP, "Get Timestamp"),                             \
 	___C(MAX, "invalid / last command")
 
 #define ___C(a, b) CXL_MEM_COMMAND_ID_##a
diff --git a/original/uapi/linux/devlink.h b/original/uapi/linux/devlink.h
index b3c8383..130cae0 100644
--- a/original/uapi/linux/devlink.h
+++ b/original/uapi/linux/devlink.h
@@ -139,6 +139,8 @@ enum devlink_command {
 	DEVLINK_CMD_SELFTESTS_GET,	/* can dump */
 	DEVLINK_CMD_SELFTESTS_RUN,
 
+	DEVLINK_CMD_NOTIFY_FILTER_SET,
+
 	/* add new commands above here */
 	__DEVLINK_CMD_MAX,
 	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
diff --git a/original/uapi/linux/dpll.h b/original/uapi/linux/dpll.h
index 715a491..b4e947f 100644
--- a/original/uapi/linux/dpll.h
+++ b/original/uapi/linux/dpll.h
@@ -179,6 +179,7 @@ enum dpll_a_pin {
 	DPLL_A_PIN_PHASE_ADJUST_MAX,
 	DPLL_A_PIN_PHASE_ADJUST,
 	DPLL_A_PIN_PHASE_OFFSET,
+	DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
diff --git a/original/uapi/linux/ethtool.h b/original/uapi/linux/ethtool.h
index f7fba0d..06ef6b7 100644
--- a/original/uapi/linux/ethtool.h
+++ b/original/uapi/linux/ethtool.h
@@ -1266,6 +1266,8 @@ struct ethtool_rxfh_indir {
  *	hardware hash key.
  * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
  *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @input_xfrm: Defines how the input data is transformed. Valid values are one
+ *	of %RXH_XFRM_*.
  * @rsvd8: Reserved for future use; see the note on reserved space.
  * @rsvd32: Reserved for future use; see the note on reserved space.
  * @rss_config: RX ring/queue index for each hash value i.e., indirection table
@@ -1285,7 +1287,8 @@ struct ethtool_rxfh {
 	__u32   indir_size;
 	__u32   key_size;
 	__u8	hfunc;
-	__u8	rsvd8[3];
+	__u8	input_xfrm;
+	__u8	rsvd8[2];
 	__u32	rsvd32;
 	__u32   rss_config[];
 };
@@ -1992,6 +1995,15 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 
 #define WOL_MODE_COUNT		8
 
+/* RSS hash function data
+ * XOR the corresponding source and destination fields of each specified
+ * protocol. Both copies of the XOR'ed fields are fed into the RSS and RXHASH
+ * calculation. Note that this XORing reduces the input set entropy and could
+ * be exploited to reduce the RSS queue spread.
+ */
+#define	RXH_XFRM_SYM_XOR	(1 << 0)
+#define	RXH_XFRM_NO_CHANGE	0xff
+
 /* L2-L4 network traffic flow types */
 #define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
 #define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
@@ -2128,18 +2140,6 @@ enum ethtool_reset_flags {
  *	refused. For drivers: ignore this field (use kernel's
  *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
  *	be overwritten by kernel.
- * @supported: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features for which the interface
- *	supports autonegotiation or auto-detection.  Read-only.
- * @advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features that are advertised through
- *	autonegotiation or enabled for auto-detection.
- * @lp_advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, and other
- *	link features that the link partner advertised through
- *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  * @transceiver: Used to distinguish different possible PHY types,
  *	reported consistently by PHYLIB.  Read-only.
  * @master_slave_cfg: Master/slave port mode.
@@ -2181,6 +2181,21 @@ enum ethtool_reset_flags {
  * %set_link_ksettings() should validate all fields other than @cmd
  * and @link_mode_masks_nwords that are not described as read-only or
  * deprecated, and must ignore all fields described as read-only.
+ *
+ * @link_mode_masks is divided into three bitfields, each of length
+ * @link_mode_masks_nwords:
+ * - supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * - advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * - lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  */
 struct ethtool_link_settings {
 	__u32	cmd;
diff --git a/original/uapi/linux/ethtool_netlink.h b/original/uapi/linux/ethtool_netlink.h
index 73e2c10..3f89074 100644
--- a/original/uapi/linux/ethtool_netlink.h
+++ b/original/uapi/linux/ethtool_netlink.h
@@ -908,6 +908,7 @@ enum {
 	ETHTOOL_A_RSS_HFUNC,		/* u32 */
 	ETHTOOL_A_RSS_INDIR,		/* binary */
 	ETHTOOL_A_RSS_HKEY,		/* binary */
+	ETHTOOL_A_RSS_INPUT_XFRM,	/* u32 */
 
 	__ETHTOOL_A_RSS_CNT,
 	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
diff --git a/original/uapi/linux/fs.h b/original/uapi/linux/fs.h
index da43810..48ad69f 100644
--- a/original/uapi/linux/fs.h
+++ b/original/uapi/linux/fs.h
@@ -316,6 +316,7 @@ typedef int __bitwise __kernel_rwf_t;
 #define PAGE_IS_SWAPPED		(1 << 4)
 #define PAGE_IS_PFNZERO		(1 << 5)
 #define PAGE_IS_HUGE		(1 << 6)
+#define PAGE_IS_SOFT_DIRTY	(1 << 7)
 
 /*
  * struct page_region - Page region with flags
diff --git a/original/uapi/linux/if_bridge.h b/original/uapi/linux/if_bridge.h
index 2e23f99..a5b743a 100644
--- a/original/uapi/linux/if_bridge.h
+++ b/original/uapi/linux/if_bridge.h
@@ -757,6 +757,7 @@ enum {
 	MDBE_ATTR_VNI,
 	MDBE_ATTR_IFINDEX,
 	MDBE_ATTR_SRC_VNI,
+	MDBE_ATTR_STATE_MASK,
 	__MDBE_ATTR_MAX,
 };
 #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)
diff --git a/original/uapi/linux/if_link.h b/original/uapi/linux/if_link.h
index 29ff80d..ab9bcff 100644
--- a/original/uapi/linux/if_link.h
+++ b/original/uapi/linux/if_link.h
@@ -461,6 +461,286 @@ enum in6_addr_gen_mode {
 
 /* Bridge section */
 
+/**
+ * DOC: Bridge enum definition
+ *
+ * Please *note* that the timer values in the following section are expected
+ * in clock_t format, which is seconds multiplied by USER_HZ (generally
+ * defined as 100).
+ *
+ * @IFLA_BR_FORWARD_DELAY
+ *   The bridge forwarding delay is the time spent in LISTENING state
+ *   (before moving to LEARNING) and in LEARNING state (before moving
+ *   to FORWARDING). Only relevant if STP is enabled.
+ *
+ *   The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
+ *   The default value is (15 * USER_HZ).
+ *
+ * @IFLA_BR_HELLO_TIME
+ *   The time between hello packets sent by the bridge, when it is a root
+ *   bridge or a designated bridge. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
+ *   The default value is (2 * USER_HZ).
+ *
+ * @IFLA_BR_MAX_AGE
+ *   The hello packet timeout is the time until another bridge in the
+ *   spanning tree is assumed to be dead, after reception of its last hello
+ *   message. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
+ *   The default value is (20 * USER_HZ).
+ *
+ * @IFLA_BR_AGEING_TIME
+ *   Configure the bridge's FDB entries aging time. It is the time a MAC
+ *   address will be kept in the FDB after a packet has been received from
+ *   that address. After this time has passed, entries are cleaned up.
+ *   Allow values outside the 802.1 standard specification for special cases:
+ *
+ *     * 0 - entry never ages (all permanent)
+ *     * 1 - entry disappears (no persistence)
+ *
+ *   The default value is (300 * USER_HZ).
+ *
+ * @IFLA_BR_STP_STATE
+ *   Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
+ *   (*IFLA_BR_STP_STATE* == 0) for this bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_PRIORITY
+ *   Set this bridge's spanning tree priority, used during STP root bridge
+ *   election.
+ *
+ *   The valid values are between 0 and 65535.
+ *
+ * @IFLA_BR_VLAN_FILTERING
+ *   Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
+ *   (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
+ *   consider the VLAN tag when handling packets.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_PROTOCOL
+ *   Set the protocol used for VLAN filtering.
+ *
+ *   The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
+ *   is 0x8100(802.1Q).
+ *
+ * @IFLA_BR_GROUP_FWD_MASK
+ *   The group forwarding mask. This is the bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses (of the form 01:80:C2:00:00:0X).
+ *
+ *   The default value is 0, which means the bridge does not forward any
+ *   link-local frames coming on this port.
+ *
+ * @IFLA_BR_ROOT_ID
+ *   The bridge root id, read only.
+ *
+ * @IFLA_BR_BRIDGE_ID
+ *   The bridge id, read only.
+ *
+ * @IFLA_BR_ROOT_PORT
+ *   The bridge root port, read only.
+ *
+ * @IFLA_BR_ROOT_PATH_COST
+ *   The bridge root path cost, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE
+ *   The bridge topology change, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
+ *   The bridge topology change detected, read only.
+ *
+ * @IFLA_BR_HELLO_TIMER
+ *   The bridge hello timer, read only.
+ *
+ * @IFLA_BR_TCN_TIMER
+ *   The bridge tcn timer, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_TIMER
+ *   The bridge topology change timer, read only.
+ *
+ * @IFLA_BR_GC_TIMER
+ *   The bridge gc timer, read only.
+ *
+ * @IFLA_BR_GROUP_ADDR
+ *   Set the MAC address of the multicast group this bridge uses for STP.
+ *   The address must be a link-local address in standard Ethernet MAC address
+ *   format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
+ *
+ *   The default value is 0.
+ *
+ * @IFLA_BR_FDB_FLUSH
+ *   Flush bridge's fdb dynamic entries.
+ *
+ * @IFLA_BR_MCAST_ROUTER
+ *   Set bridge's multicast router if IGMP snooping is enabled.
+ *   The valid values are:
+ *
+ *     * 0 - disabled.
+ *     * 1 - automatic (queried).
+ *     * 2 - permanently enabled.
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_SNOOPING
+ *   Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
+ *   (*IFLA_BR_MCAST_SNOOPING* == 0).
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_QUERY_USE_IFADDR
+ *   If enabled use the bridge's own IP address as source address for IGMP
+ *   queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
+ *   (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_QUERIER
+ *   Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
+ *   (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
+ *   queries by the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_HASH_ELASTICITY
+ *   Set multicast database hash elasticity, It is the maximum chain length in
+ *   the multicast hash table. This attribute is *deprecated* and the value
+ *   is always 16.
+ *
+ * @IFLA_BR_MCAST_HASH_MAX
+ *   Set maximum size of the multicast hash table
+ *
+ *   The default value is 4096, the value must be a power of 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_CNT
+ *   The Last Member Query Count is the number of Group-Specific Queries
+ *   sent before the router assumes there are no local members. The Last
+ *   Member Query Count is also the number of Group-and-Source-Specific
+ *   Queries sent before the router assumes there are no listeners for a
+ *   particular source.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_CNT
+ *   The Startup Query Count is the number of Queries sent out on startup,
+ *   separated by the Startup Query Interval.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_INTVL
+ *   The Last Member Query Interval is the Max Response Time inserted into
+ *   Group-Specific Queries sent in response to Leave Group messages, and
+ *   is also the amount of time between Group-Specific Query messages.
+ *
+ *   The default value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_MEMBERSHIP_INTVL
+ *   The interval after which the bridge will leave a group, if no membership
+ *   reports for this group are received.
+ *
+ *   The default value is (260 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERIER_INTVL
+ *   The interval between queries sent by other routers. if no queries are
+ *   seen after this delay has passed, the bridge will start to send its own
+ *   queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
+ *
+ *   The default value is (255 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_INTVL
+ *   The Query Interval is the interval between General Queries sent by
+ *   the Querier.
+ *
+ *   The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
+ *   The Max Response Time used to calculate the Max Resp Code inserted
+ *   into the periodic General Queries.
+ *
+ *   The default value is (10 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
+ *   The interval between queries in the startup phase.
+ *
+ *   The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_NF_CALL_IPTABLES
+ *   Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
+ *   iptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_IP6TABLES
+ *   Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
+ *   ip6tables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_ARPTABLES
+ *   Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
+ *   arptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_DEFAULT_PVID
+ *   VLAN ID applied to untagged and priority-tagged incoming packets.
+ *
+ *   The default value is 1. Setting to the special value 0 makes all ports of
+ *   this bridge not have a PVID by default, which means that they will
+ *   not accept VLAN-untagged traffic.
+ *
+ * @IFLA_BR_PAD
+ *   Bridge attribute padding type for netlink message.
+ *
+ * @IFLA_BR_VLAN_STATS_ENABLED
+ *   Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_STATS_ENABLED
+ *   Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
+ *   (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
+ *   accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_IGMP_VERSION
+ *   Set the IGMP version.
+ *
+ *   The valid values are 2 and 3. The default value is 2.
+ *
+ * @IFLA_BR_MCAST_MLD_VERSION
+ *   Set the MLD version.
+ *
+ *   The valid values are 1 and 2. The default value is 1.
+ *
+ * @IFLA_BR_VLAN_STATS_PER_PORT
+ *   Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
+ *   Can be changed only when there are no port VLANs configured.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MULTI_BOOLOPT
+ *   The multi_boolopt is used to control new boolean options to avoid adding
+ *   new netlink attributes. You can look at ``enum br_boolopt_id`` for those
+ *   options.
+ *
+ * @IFLA_BR_MCAST_QUERIER_STATE
+ *   Bridge mcast querier states, read only.
+ *
+ * @IFLA_BR_FDB_N_LEARNED
+ *   The number of dynamically learned FDB entries for the current bridge,
+ *   read only.
+ *
+ * @IFLA_BR_FDB_MAX_LEARNED
+ *   Set the number of max dynamically learned FDB entries for the current
+ *   bridge.
+ */
 enum {
 	IFLA_BR_UNSPEC,
 	IFLA_BR_FORWARD_DELAY,
@@ -522,11 +802,252 @@ struct ifla_bridge_id {
 	__u8	addr[6]; /* ETH_ALEN */
 };
 
+/**
+ * DOC: Bridge mode enum definition
+ *
+ * @BRIDGE_MODE_HAIRPIN
+ *   Controls whether traffic may be sent back out of the port on which it
+ *   was received. This option is also called reflective relay mode, and is
+ *   used to support basic VEPA (Virtual Ethernet Port Aggregator)
+ *   capabilities. By default, this flag is turned off and the bridge will
+ *   not forward traffic back out of the receiving port.
+ */
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
 };
 
+/**
+ * DOC: Bridge port enum definition
+ *
+ * @IFLA_BRPORT_STATE
+ *   The operation state of the port. Here are the valid values.
+ *
+ *     * 0 - port is in STP *DISABLED* state. Make this port completely
+ *       inactive for STP. This is also called BPDU filter and could be used
+ *       to disable STP on an untrusted port, like a leaf virtual device.
+ *       The traffic forwarding is also stopped on this port.
+ *     * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled
+ *       on the bridge. In this state the port listens for STP BPDUs and
+ *       drops all other traffic frames.
+ *     * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on
+ *       the bridge. In this state the port will accept traffic only for the
+ *       purpose of updating MAC address tables.
+ *     * 3 - port is in STP *FORWARDING* state. Port is fully active.
+ *     * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on
+ *       the bridge. This state is used during the STP election process.
+ *       In this state, port will only process STP BPDUs.
+ *
+ * @IFLA_BRPORT_PRIORITY
+ *   The STP port priority. The valid values are between 0 and 255.
+ *
+ * @IFLA_BRPORT_COST
+ *   The STP path cost of the port. The valid values are between 1 and 65535.
+ *
+ * @IFLA_BRPORT_MODE
+ *   Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details.
+ *
+ * @IFLA_BRPORT_GUARD
+ *   Controls whether STP BPDUs will be processed by the bridge port. By
+ *   default, the flag is turned off to allow BPDU processing. Turning this
+ *   flag on will disable the bridge port if a STP BPDU packet is received.
+ *
+ *   If the bridge has Spanning Tree enabled, hostile devices on the network
+ *   may send BPDU on a port and cause network failure. Setting *guard on*
+ *   will detect and stop this by disabling the port. The port will be
+ *   restarted if the link is brought down, or removed and reattached.
+ *
+ * @IFLA_BRPORT_PROTECT
+ *   Controls whether a given port is allowed to become a root port or not.
+ *   Only used when STP is enabled on the bridge. By default the flag is off.
+ *
+ *   This feature is also called root port guard. If BPDU is received from a
+ *   leaf (edge) port, it should not be elected as root port. This could
+ *   be used if using STP on a bridge and the downstream bridges are not fully
+ *   trusted; this prevents a hostile guest from rerouting traffic.
+ *
+ * @IFLA_BRPORT_FAST_LEAVE
+ *   This flag allows the bridge to immediately stop multicast traffic
+ *   forwarding on a port that receives an IGMP Leave message. It is only used
+ *   when IGMP snooping is enabled on the bridge. By default the flag is off.
+ *
+ * @IFLA_BRPORT_LEARNING
+ *   Controls whether a given port will learn *source* MAC addresses from
+ *   received traffic or not. Also controls whether dynamic FDB entries
+ *   (which can also be added by software) will be refreshed by incoming
+ *   traffic. By default this flag is on.
+ *
+ * @IFLA_BRPORT_UNICAST_FLOOD
+ *   Controls whether unicast traffic for which there is no FDB entry will
+ *   be flooded towards this port. By default this flag is on.
+ *
+ * @IFLA_BRPORT_PROXYARP
+ *   Enable proxy ARP on this port.
+ *
+ * @IFLA_BRPORT_LEARNING_SYNC
+ *   Controls whether a given port will sync MAC addresses learned on device
+ *   port to bridge FDB.
+ *
+ * @IFLA_BRPORT_PROXYARP_WIFI
+ *   Enable proxy ARP on this port which meets extended requirements by
+ *   IEEE 802.11 and Hotspot 2.0 specifications.
+ *
+ * @IFLA_BRPORT_ROOT_ID
+ *
+ * @IFLA_BRPORT_BRIDGE_ID
+ *
+ * @IFLA_BRPORT_DESIGNATED_PORT
+ *
+ * @IFLA_BRPORT_DESIGNATED_COST
+ *
+ * @IFLA_BRPORT_ID
+ *
+ * @IFLA_BRPORT_NO
+ *
+ * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
+ *
+ * @IFLA_BRPORT_CONFIG_PENDING
+ *
+ * @IFLA_BRPORT_MESSAGE_AGE_TIMER
+ *
+ * @IFLA_BRPORT_FORWARD_DELAY_TIMER
+ *
+ * @IFLA_BRPORT_HOLD_TIMER
+ *
+ * @IFLA_BRPORT_FLUSH
+ *   Flush bridge ports' fdb dynamic entries.
+ *
+ * @IFLA_BRPORT_MULTICAST_ROUTER
+ *   Configure the port's multicast router presence. A port with
+ *   a multicast router will receive all multicast traffic.
+ *   The valid values are:
+ *
+ *     * 0 disable multicast routers on this port
+ *     * 1 let the system detect the presence of routers (default)
+ *     * 2 permanently enable multicast traffic forwarding on this port
+ *     * 3 enable multicast routers temporarily on this port, not depending
+ *         on incoming queries.
+ *
+ * @IFLA_BRPORT_PAD
+ *
+ * @IFLA_BRPORT_MCAST_FLOOD
+ *   Controls whether a given port will flood multicast traffic for which
+ *   there is no MDB entry. By default this flag is on.
+ *
+ * @IFLA_BRPORT_MCAST_TO_UCAST
+ *   Controls whether a given port will replicate packets using unicast
+ *   instead of multicast. By default this flag is off.
+ *
+ *   This is done by copying the packet per host and changing the multicast
+ *   destination MAC to a unicast one accordingly.
+ *
+ *   *mcast_to_unicast* works on top of the multicast snooping feature of the
+ *   bridge. Which means unicast copies are only delivered to hosts which
+ *   are interested in unicast and signaled this via IGMP/MLD reports previously.
+ *
+ *   This feature is intended for interface types which have a more reliable
+ *   and/or efficient way to deliver unicast packets than broadcast ones
+ *   (e.g. WiFi).
+ *
+ *   However, it should only be enabled on interfaces where no IGMPv2/MLDv1
+ *   report suppression takes place. IGMP/MLD report suppression issue is
+ *   usually overcome by the network daemon (supplicant) enabling AP isolation
+ *   and by that separating all STAs.
+ *
+ *   Delivery of STA-to-STA IP multicast is made possible again by enabling
+ *   and utilizing the bridge hairpin mode, which considers the incoming port
+ *   as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option).
+ *   Hairpin mode is performed after multicast snooping, therefore leading
+ *   to only deliver reports to STAs running a multicast router.
+ *
+ * @IFLA_BRPORT_VLAN_TUNNEL
+ *   Controls whether vlan to tunnel mapping is enabled on the port.
+ *   By default this flag is off.
+ *
+ * @IFLA_BRPORT_BCAST_FLOOD
+ *   Controls flooding of broadcast traffic on the given port. By default
+ *   this flag is on.
+ *
+ * @IFLA_BRPORT_GROUP_FWD_MASK
+ *   Set the group forward mask. This is a bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
+ *   to 0, which means the bridge does not forward any link-local frames
+ *   coming on this port).
+ *
+ * @IFLA_BRPORT_NEIGH_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression
+ *   is enabled on the port. By default this flag is off.
+ *
+ * @IFLA_BRPORT_ISOLATED
+ *   Controls whether a given port will be isolated, which means it will be
+ *   able to communicate with non-isolated ports only. By default this
+ *   flag is off.
+ *
+ * @IFLA_BRPORT_BACKUP_PORT
+ *   Set a backup port. If the port loses carrier all traffic will be
+ *   redirected to the configured backup port. Set the value to 0 to disable
+ *   it.
+ *
+ * @IFLA_BRPORT_MRP_RING_OPEN
+ *
+ * @IFLA_BRPORT_MRP_IN_OPEN
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
+ *   The number of per-port EHT hosts limit. The default value is 512.
+ *   Setting to 0 is not allowed.
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
+ *   The current number of tracked hosts, read only.
+ *
+ * @IFLA_BRPORT_LOCKED
+ *   Controls whether a port will be locked, meaning that hosts behind the
+ *   port will not be able to communicate through the port unless an FDB
+ *   entry with the unit's MAC address is in the FDB. The common use case is
+ *   that hosts are allowed access through authentication with the IEEE 802.1X
+ *   protocol or based on whitelists. By default this flag is off.
+ *
+ *   Please note that secure 802.1X deployments should always use the
+ *   *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its
+ *   FDB based on link-local (EAPOL) traffic received on the port.
+ *
+ * @IFLA_BRPORT_MAB
+ *   Controls whether a port will use MAC Authentication Bypass (MAB), a
+ *   technique through which select MAC addresses may be allowed on a locked
+ *   port, without using 802.1X authentication. Packets with an unknown source
+ *   MAC address generates a "locked" FDB entry on the incoming bridge port.
+ *   The common use case is for user space to react to these bridge FDB
+ *   notifications and optionally replace the locked FDB entry with a normal
+ *   one, allowing traffic to pass for whitelisted MAC addresses.
+ *
+ *   Setting this flag also requires *IFLA_BRPORT_LOCKED* and
+ *   *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized
+ *   data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic
+ *   FDB entries installed by user space (as replacements for the locked FDB
+ *   entries) to be refreshed and/or aged out.
+ *
+ * @IFLA_BRPORT_MCAST_N_GROUPS
+ *
+ * @IFLA_BRPORT_MCAST_MAX_GROUPS
+ *   Sets the maximum number of MDB entries that can be registered for a
+ *   given port. Attempts to register more MDB entries at the port than this
+ *   limit allows will be rejected, whether they are done through netlink
+ *   (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
+ *   limit of 0 disables the limit. The default value is 0.
+ *
+ * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression is
+ *   enabled for a given port. By default this flag is off.
+ *
+ *   Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS*
+ *   is enabled for a given port.
+ *
+ * @IFLA_BRPORT_BACKUP_NHID
+ *   The FDB nexthop object ID to attach to packets being redirected to a
+ *   backup port that has VLAN tunnel mapping enabled (via the
+ *   *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has
+ *   the effect of not attaching any ID.
+ */
 enum {
 	IFLA_BRPORT_UNSPEC,
 	IFLA_BRPORT_STATE,	/* Spanning tree state     */
@@ -856,6 +1377,7 @@ enum {
 	IFLA_VXLAN_DF,
 	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
 	IFLA_VXLAN_LOCALBYPASS,
+	IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
 	__IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
@@ -873,6 +1395,13 @@ enum ifla_vxlan_df {
 	VXLAN_DF_MAX = __VXLAN_DF_END - 1,
 };
 
+enum ifla_vxlan_label_policy {
+	VXLAN_LABEL_FIXED = 0,
+	VXLAN_LABEL_INHERIT = 1,
+	__VXLAN_LABEL_END,
+	VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
+};
+
 /* GENEVE section */
 enum {
 	IFLA_GENEVE_UNSPEC,
diff --git a/original/uapi/linux/if_xdp.h b/original/uapi/linux/if_xdp.h
index 8d48863..d316984 100644
--- a/original/uapi/linux/if_xdp.h
+++ b/original/uapi/linux/if_xdp.h
@@ -33,7 +33,13 @@
 #define XDP_USE_SG	(1 << 4)
 
 /* Flags for xsk_umem_config flags */
-#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0)
+#define XDP_UMEM_UNALIGNED_CHUNK_FLAG	(1 << 0)
+
+/* Force checksum calculation in software. Can be used for testing or
+ * working around potential HW issues. This option causes performance
+ * degradation and only works in XDP_COPY mode.
+ */
+#define XDP_UMEM_TX_SW_CSUM		(1 << 1)
 
 struct sockaddr_xdp {
 	__u16 sxdp_family;
@@ -76,6 +82,7 @@ struct xdp_umem_reg {
 	__u32 chunk_size;
 	__u32 headroom;
 	__u32 flags;
+	__u32 tx_metadata_len;
 };
 
 struct xdp_statistics {
@@ -105,6 +112,41 @@ struct xdp_options {
 #define XSK_UNALIGNED_BUF_ADDR_MASK \
 	((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1)
 
+/* Request transmit timestamp. Upon completion, put it into tx_timestamp
+ * field of struct xsk_tx_metadata.
+ */
+#define XDP_TXMD_FLAGS_TIMESTAMP		(1 << 0)
+
+/* Request transmit checksum offload. Checksum start position and offset
+ * are communicated via csum_start and csum_offset fields of struct
+ * xsk_tx_metadata.
+ */
+#define XDP_TXMD_FLAGS_CHECKSUM			(1 << 1)
+
+/* AF_XDP offloads request. 'request' union member is consumed by the driver
+ * when the packet is being transmitted. 'completion' union member is
+ * filled by the driver when the transmit completion arrives.
+ */
+struct xsk_tx_metadata {
+	__u64 flags;
+
+	union {
+		struct {
+			/* XDP_TXMD_FLAGS_CHECKSUM */
+
+			/* Offset from desc->addr where checksumming should start. */
+			__u16 csum_start;
+			/* Offset from csum_start where checksum should be stored. */
+			__u16 csum_offset;
+		} request;
+
+		struct {
+			/* XDP_TXMD_FLAGS_TIMESTAMP */
+			__u64 tx_timestamp;
+		} completion;
+	};
+};
+
 /* Rx/Tx descriptor */
 struct xdp_desc {
 	__u64 addr;
@@ -121,4 +163,7 @@ struct xdp_desc {
  */
 #define XDP_PKT_CONTD (1 << 0)
 
+/* TX packet carries valid metadata. */
+#define XDP_TX_METADATA (1 << 1)
+
 #endif /* _LINUX_IF_XDP_H */
diff --git a/original/uapi/linux/iio/types.h b/original/uapi/linux/iio/types.h
index 9c2ffdc..f2e0b2d 100644
--- a/original/uapi/linux/iio/types.h
+++ b/original/uapi/linux/iio/types.h
@@ -105,6 +105,8 @@ enum iio_modifier {
 	IIO_MOD_PITCH,
 	IIO_MOD_YAW,
 	IIO_MOD_ROLL,
+	IIO_MOD_LIGHT_UVA,
+	IIO_MOD_LIGHT_UVB,
 };
 
 enum iio_event_type {
diff --git a/original/uapi/linux/in6.h b/original/uapi/linux/in6.h
index c4c53a9..ff8d21f 100644
--- a/original/uapi/linux/in6.h
+++ b/original/uapi/linux/in6.h
@@ -145,7 +145,7 @@ struct in6_flowlabel_req {
 #define IPV6_TLV_PADN		1
 #define IPV6_TLV_ROUTERALERT	5
 #define IPV6_TLV_CALIPSO	7	/* RFC 5570 */
-#define IPV6_TLV_IOAM		49	/* TEMPORARY IANA allocation for IOAM */
+#define IPV6_TLV_IOAM		49	/* RFC 9486 */
 #define IPV6_TLV_JUMBO		194
 #define IPV6_TLV_HAO		201	/* home address option */
 
diff --git a/original/uapi/linux/io_uring.h b/original/uapi/linux/io_uring.h
index f1c16f8..7a673b5 100644
--- a/original/uapi/linux/io_uring.h
+++ b/original/uapi/linux/io_uring.h
@@ -71,6 +71,7 @@ struct io_uring_sqe {
 		__u32		uring_cmd_flags;
 		__u32		waitid_flags;
 		__u32		futex_flags;
+		__u32		install_fd_flags;
 	};
 	__u64	user_data;	/* data to be passed back at completion time */
 	/* pack this to avoid bogus arm OABI complaints */
@@ -253,6 +254,7 @@ enum io_uring_op {
 	IORING_OP_FUTEX_WAIT,
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
+	IORING_OP_FIXED_FD_INSTALL,
 
 	/* this goes last, obviously */
 	IORING_OP_LAST,
@@ -387,6 +389,13 @@ enum {
 #define IORING_MSG_RING_FLAGS_PASS	(1U << 1)
 
 /*
+ * IORING_OP_FIXED_FD_INSTALL flags (sqe->install_fd_flags)
+ *
+ * IORING_FIXED_FD_NO_CLOEXEC	Don't mark the fd as O_CLOEXEC
+ */
+#define IORING_FIXED_FD_NO_CLOEXEC	(1U << 0)
+
+/*
  * IO completion data structure (Completion Queue Entry)
  */
 struct io_uring_cqe {
@@ -558,6 +567,9 @@ enum {
 	/* register a range of fixed file slots for automatic slot allocation */
 	IORING_REGISTER_FILE_ALLOC_RANGE	= 25,
 
+	/* return status information for a buffer group */
+	IORING_REGISTER_PBUF_STATUS		= 26,
+
 	/* this goes last */
 	IORING_REGISTER_LAST,
 
@@ -684,6 +696,13 @@ struct io_uring_buf_reg {
 	__u64	resv[3];
 };
 
+/* argument for IORING_REGISTER_PBUF_STATUS */
+struct io_uring_buf_status {
+	__u32	buf_group;	/* input */
+	__u32	head;		/* output */
+	__u32	resv[8];
+};
+
 /*
  * io_uring_restriction->opcode values
  */
diff --git a/original/uapi/linux/iommufd.h b/original/uapi/linux/iommufd.h
index 0b2bc62..1dfeaa2 100644
--- a/original/uapi/linux/iommufd.h
+++ b/original/uapi/linux/iommufd.h
@@ -49,6 +49,7 @@ enum {
 	IOMMUFD_CMD_GET_HW_INFO,
 	IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING,
 	IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP,
+	IOMMUFD_CMD_HWPT_INVALIDATE,
 };
 
 /**
@@ -613,4 +614,82 @@ struct iommu_hwpt_get_dirty_bitmap {
 #define IOMMU_HWPT_GET_DIRTY_BITMAP _IO(IOMMUFD_TYPE, \
 					IOMMUFD_CMD_HWPT_GET_DIRTY_BITMAP)
 
+/**
+ * enum iommu_hwpt_invalidate_data_type - IOMMU HWPT Cache Invalidation
+ *                                        Data Type
+ * @IOMMU_HWPT_INVALIDATE_DATA_VTD_S1: Invalidation data for VTD_S1
+ */
+enum iommu_hwpt_invalidate_data_type {
+	IOMMU_HWPT_INVALIDATE_DATA_VTD_S1,
+};
+
+/**
+ * enum iommu_hwpt_vtd_s1_invalidate_flags - Flags for Intel VT-d
+ *                                           stage-1 cache invalidation
+ * @IOMMU_VTD_INV_FLAGS_LEAF: Indicates whether the invalidation applies
+ *                            to all-levels page structure cache or just
+ *                            the leaf PTE cache.
+ */
+enum iommu_hwpt_vtd_s1_invalidate_flags {
+	IOMMU_VTD_INV_FLAGS_LEAF = 1 << 0,
+};
+
+/**
+ * struct iommu_hwpt_vtd_s1_invalidate - Intel VT-d cache invalidation
+ *                                       (IOMMU_HWPT_INVALIDATE_DATA_VTD_S1)
+ * @addr: The start address of the range to be invalidated. It needs to
+ *        be 4KB aligned.
+ * @npages: Number of contiguous 4K pages to be invalidated.
+ * @flags: Combination of enum iommu_hwpt_vtd_s1_invalidate_flags
+ * @__reserved: Must be 0
+ *
+ * The Intel VT-d specific invalidation data for user-managed stage-1 cache
+ * invalidation in nested translation. Userspace uses this structure to
+ * tell the impacted cache scope after modifying the stage-1 page table.
+ *
+ * Invalidating all the caches related to the page table by setting @addr
+ * to be 0 and @npages to be U64_MAX.
+ *
+ * The device TLB will be invalidated automatically if ATS is enabled.
+ */
+struct iommu_hwpt_vtd_s1_invalidate {
+	__aligned_u64 addr;
+	__aligned_u64 npages;
+	__u32 flags;
+	__u32 __reserved;
+};
+
+/**
+ * struct iommu_hwpt_invalidate - ioctl(IOMMU_HWPT_INVALIDATE)
+ * @size: sizeof(struct iommu_hwpt_invalidate)
+ * @hwpt_id: ID of a nested HWPT for cache invalidation
+ * @data_uptr: User pointer to an array of driver-specific cache invalidation
+ *             data.
+ * @data_type: One of enum iommu_hwpt_invalidate_data_type, defining the data
+ *             type of all the entries in the invalidation request array. It
+ *             should be a type supported by the hwpt pointed by @hwpt_id.
+ * @entry_len: Length (in bytes) of a request entry in the request array
+ * @entry_num: Input the number of cache invalidation requests in the array.
+ *             Output the number of requests successfully handled by kernel.
+ * @__reserved: Must be 0.
+ *
+ * Invalidate the iommu cache for user-managed page table. Modifications on a
+ * user-managed page table should be followed by this operation to sync cache.
+ * Each ioctl can support one or more cache invalidation requests in the array
+ * that has a total size of @entry_len * @entry_num.
+ *
+ * An empty invalidation request array by setting @entry_num==0 is allowed, and
+ * @entry_len and @data_uptr would be ignored in this case. This can be used to
+ * check if the given @data_type is supported or not by kernel.
+ */
+struct iommu_hwpt_invalidate {
+	__u32 size;
+	__u32 hwpt_id;
+	__aligned_u64 data_uptr;
+	__u32 data_type;
+	__u32 entry_len;
+	__u32 entry_num;
+	__u32 __reserved;
+};
+#define IOMMU_HWPT_INVALIDATE _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_INVALIDATE)
 #endif
diff --git a/original/uapi/linux/kexec.h b/original/uapi/linux/kexec.h
index 01766dd..c17bb09 100644
--- a/original/uapi/linux/kexec.h
+++ b/original/uapi/linux/kexec.h
@@ -25,6 +25,7 @@
 #define KEXEC_FILE_UNLOAD	0x00000001
 #define KEXEC_FILE_ON_CRASH	0x00000002
 #define KEXEC_FILE_NO_INITRAMFS	0x00000004
+#define KEXEC_FILE_DEBUG	0x00000008
 
 /* These values match the ELF architecture values.
  * Unless there is a good reason that should continue to be the case.
diff --git a/original/uapi/linux/kvm.h b/original/uapi/linux/kvm.h
index 211b86d..c330853 100644
--- a/original/uapi/linux/kvm.h
+++ b/original/uapi/linux/kvm.h
@@ -16,76 +16,6 @@
 
 #define KVM_API_VERSION 12
 
-/* *** Deprecated interfaces *** */
-
-#define KVM_TRC_SHIFT           16
-
-#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
-
-#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
-
-#define KVM_TRC_HEAD_SIZE       12
-#define KVM_TRC_CYCLE_SIZE      8
-#define KVM_TRC_EXTRA_MAX       7
-
-#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
-
-struct kvm_user_trace_setup {
-	__u32 buf_size;
-	__u32 buf_nr;
-};
-
-#define __KVM_DEPRECATED_MAIN_W_0x06 \
-	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
-#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
-
-#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
-
-struct kvm_breakpoint {
-	__u32 enabled;
-	__u32 padding;
-	__u64 address;
-};
-
-struct kvm_debug_guest {
-	__u32 enabled;
-	__u32 pad;
-	struct kvm_breakpoint breakpoints[4];
-	__u32 singlestep;
-};
-
-#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
-
-/* *** End of deprecated interfaces *** */
-
-
 /* for KVM_SET_USER_MEMORY_REGION */
 struct kvm_userspace_memory_region {
 	__u32 slot;
@@ -95,6 +25,19 @@ struct kvm_userspace_memory_region {
 	__u64 userspace_addr; /* start of the userspace allocated memory */
 };
 
+/* for KVM_SET_USER_MEMORY_REGION2 */
+struct kvm_userspace_memory_region2 {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size;
+	__u64 userspace_addr;
+	__u64 guest_memfd_offset;
+	__u32 guest_memfd;
+	__u32 pad1;
+	__u64 pad2[14];
+};
+
 /*
  * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for
  * userspace, other bits are reserved for kvm internal use which are defined
@@ -102,6 +45,7 @@ struct kvm_userspace_memory_region {
  */
 #define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
 #define KVM_MEM_READONLY	(1UL << 1)
+#define KVM_MEM_GUEST_MEMFD	(1UL << 2)
 
 /* for KVM_IRQ_LINE */
 struct kvm_irq_level {
@@ -265,6 +209,7 @@ struct kvm_xen_exit {
 #define KVM_EXIT_RISCV_CSR        36
 #define KVM_EXIT_NOTIFY           37
 #define KVM_EXIT_LOONGARCH_IOCSR  38
+#define KVM_EXIT_MEMORY_FAULT     39
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 /* Emulate instruction failed. */
@@ -518,6 +463,13 @@ struct kvm_run {
 #define KVM_NOTIFY_CONTEXT_INVALID	(1 << 0)
 			__u32 flags;
 		} notify;
+		/* KVM_EXIT_MEMORY_FAULT */
+		struct {
+#define KVM_MEMORY_EXIT_FLAG_PRIVATE	(1ULL << 3)
+			__u64 flags;
+			__u64 gpa;
+			__u64 size;
+		} memory_fault;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
@@ -945,9 +897,6 @@ struct kvm_ppc_resize_hpt {
  */
 #define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
 #define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
-#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
-#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
 #define KVM_GET_EMULATED_CPUID	  _IOWR(KVMIO, 0x09, struct kvm_cpuid2)
 #define KVM_GET_MSR_FEATURE_INDEX_LIST    _IOWR(KVMIO, 0x0a, struct kvm_msr_list)
 
@@ -1201,6 +1150,11 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228
 #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229
 #define KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES 230
+#define KVM_CAP_USER_MEMORY2 231
+#define KVM_CAP_MEMORY_FAULT_INFO 232
+#define KVM_CAP_MEMORY_ATTRIBUTES 233
+#define KVM_CAP_GUEST_MEMFD 234
+#define KVM_CAP_VM_TYPES 235
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1291,6 +1245,7 @@ struct kvm_x86_mce {
 #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL	(1 << 4)
 #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND		(1 << 5)
 #define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG	(1 << 6)
+#define KVM_XEN_HVM_CONFIG_PVCLOCK_TSC_UNSTABLE	(1 << 7)
 
 struct kvm_xen_hvm_config {
 	__u32 flags;
@@ -1483,6 +1438,8 @@ struct kvm_vfio_spapr_tce {
 					struct kvm_userspace_memory_region)
 #define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
 #define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
+#define KVM_SET_USER_MEMORY_REGION2 _IOW(KVMIO, 0x49, \
+					 struct kvm_userspace_memory_region2)
 
 /* enable ucontrol for s390 */
 struct kvm_s390_ucas_mapping {
@@ -1507,20 +1464,8 @@ struct kvm_s390_ucas_mapping {
 			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
 #define KVM_UNREGISTER_COALESCED_MMIO \
 			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
-				       struct kvm_assigned_pci_dev)
 #define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
-/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
-#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
 #define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
-#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
-				       struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
-				       struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
 #define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
 #define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
 #define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
@@ -1537,9 +1482,6 @@ struct kvm_s390_ucas_mapping {
 *  KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */
 #define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
 #define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
-/* Available with KVM_CAP_PCI_2_3 */
-#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
-				       struct kvm_assigned_pci_dev)
 /* Available with KVM_CAP_SIGNAL_MSI */
 #define KVM_SIGNAL_MSI            _IOW(KVMIO,  0xa5, struct kvm_msi)
 /* Available with KVM_CAP_PPC_GET_SMMU_INFO */
@@ -1592,8 +1534,6 @@ struct kvm_s390_ucas_mapping {
 #define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
 #define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
 #define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
-/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
 #define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
 #define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
 #define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
@@ -2267,4 +2207,24 @@ struct kvm_s390_zpci_op {
 /* flags for kvm_s390_zpci_op->u.reg_aen.flags */
 #define KVM_S390_ZPCIOP_REGAEN_HOST    (1 << 0)
 
+/* Available with KVM_CAP_MEMORY_ATTRIBUTES */
+#define KVM_SET_MEMORY_ATTRIBUTES              _IOW(KVMIO,  0xd2, struct kvm_memory_attributes)
+
+struct kvm_memory_attributes {
+	__u64 address;
+	__u64 size;
+	__u64 attributes;
+	__u64 flags;
+};
+
+#define KVM_MEMORY_ATTRIBUTE_PRIVATE           (1ULL << 3)
+
+#define KVM_CREATE_GUEST_MEMFD	_IOWR(KVMIO,  0xd4, struct kvm_create_guest_memfd)
+
+struct kvm_create_guest_memfd {
+	__u64 size;
+	__u64 flags;
+	__u64 reserved[6];
+};
+
 #endif /* __LINUX_KVM_H */
diff --git a/original/uapi/linux/lsm.h b/original/uapi/linux/lsm.h
new file mode 100644
index 0000000..f8aef9a
--- /dev/null
+++ b/original/uapi/linux/lsm.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linux Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <casey@schaufler-ca.com>
+ * Copyright (C) 2022 Intel Corporation
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+
+/**
+ * struct lsm_ctx - LSM context information
+ * @id: the LSM id number, see LSM_ID_XXX
+ * @flags: LSM specific flags
+ * @len: length of the lsm_ctx struct, @ctx and any other data or padding
+ * @ctx_len: the size of @ctx
+ * @ctx: the LSM context value
+ *
+ * The @len field MUST be equal to the size of the lsm_ctx struct
+ * plus any additional padding and/or data placed after @ctx.
+ *
+ * In all cases @ctx_len MUST be equal to the length of @ctx.
+ * If @ctx is a string value it should be nul terminated with
+ * @ctx_len equal to `strlen(@ctx) + 1`.  Binary values are
+ * supported.
+ *
+ * The @flags and @ctx fields SHOULD only be interpreted by the
+ * LSM specified by @id; they MUST be set to zero/0 when not used.
+ */
+struct lsm_ctx {
+	__u64 id;
+	__u64 flags;
+	__u64 len;
+	__u64 ctx_len;
+	__u8 ctx[] __counted_by(ctx_len);
+};
+
+/*
+ * ID tokens to identify Linux Security Modules (LSMs)
+ *
+ * These token values are used to uniquely identify specific LSMs
+ * in the kernel as well as in the kernel's LSM userspace API.
+ *
+ * A value of zero/0 is considered undefined and should not be used
+ * outside the kernel. Values 1-99 are reserved for potential
+ * future use.
+ */
+#define LSM_ID_UNDEF		0
+#define LSM_ID_CAPABILITY	100
+#define LSM_ID_SELINUX		101
+#define LSM_ID_SMACK		102
+#define LSM_ID_TOMOYO		103
+#define LSM_ID_APPARMOR		104
+#define LSM_ID_YAMA		105
+#define LSM_ID_LOADPIN		106
+#define LSM_ID_SAFESETID	107
+#define LSM_ID_LOCKDOWN		108
+#define LSM_ID_BPF		109
+#define LSM_ID_LANDLOCK		110
+
+/*
+ * LSM_ATTR_XXX definitions identify different LSM attributes
+ * which are used in the kernel's LSM userspace API. Support
+ * for these attributes vary across the different LSMs. None
+ * are required.
+ *
+ * A value of zero/0 is considered undefined and should not be used
+ * outside the kernel. Values 1-99 are reserved for potential
+ * future use.
+ */
+#define LSM_ATTR_UNDEF		0
+#define LSM_ATTR_CURRENT	100
+#define LSM_ATTR_EXEC		101
+#define LSM_ATTR_FSCREATE	102
+#define LSM_ATTR_KEYCREATE	103
+#define LSM_ATTR_PREV		104
+#define LSM_ATTR_SOCKCREATE	105
+
+/*
+ * LSM_FLAG_XXX definitions identify special handling instructions
+ * for the API.
+ */
+#define LSM_FLAG_SINGLE	0x0001
+
+#endif /* _UAPI_LINUX_LSM_H */
diff --git a/original/uapi/linux/mei.h b/original/uapi/linux/mei.h
index 171c5cc..68a0272 100644
--- a/original/uapi/linux/mei.h
+++ b/original/uapi/linux/mei.h
@@ -100,14 +100,14 @@ struct mei_connect_client_data_vtag {
  * a FW client on a tagged channel. From this point on, every read
  * and write will communicate with the associated FW client
  * on the tagged channel.
- * Upone close() the communication is terminated.
+ * Upon close() the communication is terminated.
  *
  * The IOCTL argument is a struct with a union that contains
  * the input parameter and the output parameter for this IOCTL.
  *
  * The input parameter is UUID of the FW Client, a vtag [0,255].
  * The output parameter is the properties of the FW client
- * (FW protocool version and max message size).
+ * (FW protocol version and max message size).
  *
  * Clients that do not support tagged connection
  * will respond with -EOPNOTSUPP.
diff --git a/original/uapi/linux/mount.h b/original/uapi/linux/mount.h
index bb242fd..ad5478d 100644
--- a/original/uapi/linux/mount.h
+++ b/original/uapi/linux/mount.h
@@ -138,4 +138,74 @@ struct mount_attr {
 /* List of all mount_attr versions. */
 #define MOUNT_ATTR_SIZE_VER0	32 /* sizeof first published struct */
 
+
+/*
+ * Structure for getting mount/superblock/filesystem info with statmount(2).
+ *
+ * The interface is similar to statx(2): individual fields or groups can be
+ * selected with the @mask argument of statmount().  Kernel will set the @mask
+ * field according to the supported fields.
+ *
+ * If string fields are selected, then the caller needs to pass a buffer that
+ * has space after the fixed part of the structure.  Nul terminated strings are
+ * copied there and offsets relative to @str are stored in the relevant fields.
+ * If the buffer is too small, then EOVERFLOW is returned.  The actually used
+ * size is returned in @size.
+ */
+struct statmount {
+	__u32 size;		/* Total size, including strings */
+	__u32 __spare1;
+	__u64 mask;		/* What results were written */
+	__u32 sb_dev_major;	/* Device ID */
+	__u32 sb_dev_minor;
+	__u64 sb_magic;		/* ..._SUPER_MAGIC */
+	__u32 sb_flags;		/* SB_{RDONLY,SYNCHRONOUS,DIRSYNC,LAZYTIME} */
+	__u32 fs_type;		/* [str] Filesystem type */
+	__u64 mnt_id;		/* Unique ID of mount */
+	__u64 mnt_parent_id;	/* Unique ID of parent (for root == mnt_id) */
+	__u32 mnt_id_old;	/* Reused IDs used in proc/.../mountinfo */
+	__u32 mnt_parent_id_old;
+	__u64 mnt_attr;		/* MOUNT_ATTR_... */
+	__u64 mnt_propagation;	/* MS_{SHARED,SLAVE,PRIVATE,UNBINDABLE} */
+	__u64 mnt_peer_group;	/* ID of shared peer group */
+	__u64 mnt_master;	/* Mount receives propagation from this ID */
+	__u64 propagate_from;	/* Propagation from in current namespace */
+	__u32 mnt_root;		/* [str] Root of mount relative to root of fs */
+	__u32 mnt_point;	/* [str] Mountpoint relative to current root */
+	__u64 __spare2[50];
+	char str[];		/* Variable size part containing strings */
+};
+
+/*
+ * Structure for passing mount ID and miscellaneous parameters to statmount(2)
+ * and listmount(2).
+ *
+ * For statmount(2) @param represents the request mask.
+ * For listmount(2) @param represents the last listed mount id (or zero).
+ */
+struct mnt_id_req {
+	__u32 size;
+	__u32 spare;
+	__u64 mnt_id;
+	__u64 param;
+};
+
+/* List of all mnt_id_req versions. */
+#define MNT_ID_REQ_SIZE_VER0	24 /* sizeof first published struct */
+
+/*
+ * @mask bits for statmount(2)
+ */
+#define STATMOUNT_SB_BASIC		0x00000001U     /* Want/got sb_... */
+#define STATMOUNT_MNT_BASIC		0x00000002U	/* Want/got mnt_... */
+#define STATMOUNT_PROPAGATE_FROM	0x00000004U	/* Want/got propagate_from */
+#define STATMOUNT_MNT_ROOT		0x00000008U	/* Want/got mnt_root  */
+#define STATMOUNT_MNT_POINT		0x00000010U	/* Want/got mnt_point */
+#define STATMOUNT_FS_TYPE		0x00000020U	/* Want/got fs_type */
+
+/*
+ * Special @mnt_id values that can be passed to listmount
+ */
+#define LSMT_ROOT		0xffffffffffffffff	/* root mount */
+
 #endif /* _UAPI_LINUX_MOUNT_H */
diff --git a/original/uapi/linux/mptcp.h b/original/uapi/linux/mptcp.h
index a645156..74cfe49 100644
--- a/original/uapi/linux/mptcp.h
+++ b/original/uapi/linux/mptcp.h
@@ -57,6 +57,7 @@ struct mptcp_info {
 	__u64	mptcpi_bytes_sent;
 	__u64	mptcpi_bytes_received;
 	__u64	mptcpi_bytes_acked;
+	__u8	mptcpi_subflows_total;
 };
 
 /* MPTCP Reset reason codes, rfc8684 */
diff --git a/original/uapi/linux/mptcp_pm.h b/original/uapi/linux/mptcp_pm.h
index b5d11ae..50589e5 100644
--- a/original/uapi/linux/mptcp_pm.h
+++ b/original/uapi/linux/mptcp_pm.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
 /* Do not edit directly, auto-generated from: */
-/*	Documentation/netlink/specs/mptcp.yaml */
+/*	Documentation/netlink/specs/mptcp_pm.yaml */
 /* YNL-GEN uapi header */
 
 #ifndef _UAPI_LINUX_MPTCP_PM_H
diff --git a/original/uapi/linux/netdev.h b/original/uapi/linux/netdev.h
index 2943a15..93cb411 100644
--- a/original/uapi/linux/netdev.h
+++ b/original/uapi/linux/netdev.h
@@ -44,13 +44,30 @@ enum netdev_xdp_act {
  *   timestamp via bpf_xdp_metadata_rx_timestamp().
  * @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet
  *   hash via bpf_xdp_metadata_rx_hash().
+ * @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing receive
+ *   packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag().
  */
 enum netdev_xdp_rx_metadata {
 	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,
 	NETDEV_XDP_RX_METADATA_HASH = 2,
+	NETDEV_XDP_RX_METADATA_VLAN_TAG = 4,
+};
 
-	/* private: */
-	NETDEV_XDP_RX_METADATA_MASK = 3,
+/**
+ * enum netdev_xsk_flags
+ * @NETDEV_XSK_FLAGS_TX_TIMESTAMP: HW timestamping egress packets is supported
+ *   by the driver.
+ * @NETDEV_XSK_FLAGS_TX_CHECKSUM: L3 checksum HW offload is supported by the
+ *   driver.
+ */
+enum netdev_xsk_flags {
+	NETDEV_XSK_FLAGS_TX_TIMESTAMP = 1,
+	NETDEV_XSK_FLAGS_TX_CHECKSUM = 2,
+};
+
+enum netdev_queue_type {
+	NETDEV_QUEUE_TYPE_RX,
+	NETDEV_QUEUE_TYPE_TX,
 };
 
 enum {
@@ -59,21 +76,80 @@ enum {
 	NETDEV_A_DEV_XDP_FEATURES,
 	NETDEV_A_DEV_XDP_ZC_MAX_SEGS,
 	NETDEV_A_DEV_XDP_RX_METADATA_FEATURES,
+	NETDEV_A_DEV_XSK_FEATURES,
 
 	__NETDEV_A_DEV_MAX,
 	NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1)
 };
 
 enum {
+	NETDEV_A_PAGE_POOL_ID = 1,
+	NETDEV_A_PAGE_POOL_IFINDEX,
+	NETDEV_A_PAGE_POOL_NAPI_ID,
+	NETDEV_A_PAGE_POOL_INFLIGHT,
+	NETDEV_A_PAGE_POOL_INFLIGHT_MEM,
+	NETDEV_A_PAGE_POOL_DETACH_TIME,
+
+	__NETDEV_A_PAGE_POOL_MAX,
+	NETDEV_A_PAGE_POOL_MAX = (__NETDEV_A_PAGE_POOL_MAX - 1)
+};
+
+enum {
+	NETDEV_A_PAGE_POOL_STATS_INFO = 1,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_FAST = 8,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW_HIGH_ORDER,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_EMPTY,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_REFILL,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_WAIVE,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHED,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHE_FULL,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING_FULL,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RELEASED_REFCNT,
+
+	__NETDEV_A_PAGE_POOL_STATS_MAX,
+	NETDEV_A_PAGE_POOL_STATS_MAX = (__NETDEV_A_PAGE_POOL_STATS_MAX - 1)
+};
+
+enum {
+	NETDEV_A_NAPI_IFINDEX = 1,
+	NETDEV_A_NAPI_ID,
+	NETDEV_A_NAPI_IRQ,
+	NETDEV_A_NAPI_PID,
+
+	__NETDEV_A_NAPI_MAX,
+	NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1)
+};
+
+enum {
+	NETDEV_A_QUEUE_ID = 1,
+	NETDEV_A_QUEUE_IFINDEX,
+	NETDEV_A_QUEUE_TYPE,
+	NETDEV_A_QUEUE_NAPI_ID,
+
+	__NETDEV_A_QUEUE_MAX,
+	NETDEV_A_QUEUE_MAX = (__NETDEV_A_QUEUE_MAX - 1)
+};
+
+enum {
 	NETDEV_CMD_DEV_GET = 1,
 	NETDEV_CMD_DEV_ADD_NTF,
 	NETDEV_CMD_DEV_DEL_NTF,
 	NETDEV_CMD_DEV_CHANGE_NTF,
+	NETDEV_CMD_PAGE_POOL_GET,
+	NETDEV_CMD_PAGE_POOL_ADD_NTF,
+	NETDEV_CMD_PAGE_POOL_DEL_NTF,
+	NETDEV_CMD_PAGE_POOL_CHANGE_NTF,
+	NETDEV_CMD_PAGE_POOL_STATS_GET,
+	NETDEV_CMD_QUEUE_GET,
+	NETDEV_CMD_NAPI_GET,
 
 	__NETDEV_CMD_MAX,
 	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)
 };
 
 #define NETDEV_MCGRP_MGMT	"mgmt"
+#define NETDEV_MCGRP_PAGE_POOL	"page-pool"
 
 #endif /* _UAPI_LINUX_NETDEV_H */
diff --git a/original/uapi/linux/netfilter/nf_tables.h b/original/uapi/linux/netfilter/nf_tables.h
index ca30232..117c6a9 100644
--- a/original/uapi/linux/netfilter/nf_tables.h
+++ b/original/uapi/linux/netfilter/nf_tables.h
@@ -285,9 +285,11 @@ enum nft_rule_attributes {
 /**
  * enum nft_rule_compat_flags - nf_tables rule compat flags
  *
+ * @NFT_RULE_COMPAT_F_UNUSED: unused
  * @NFT_RULE_COMPAT_F_INV: invert the check result
  */
 enum nft_rule_compat_flags {
+	NFT_RULE_COMPAT_F_UNUSED = (1 << 0),
 	NFT_RULE_COMPAT_F_INV	= (1 << 1),
 	NFT_RULE_COMPAT_F_MASK	= NFT_RULE_COMPAT_F_INV,
 };
diff --git a/original/uapi/linux/nl80211.h b/original/uapi/linux/nl80211.h
index dced2c4..1ccdcae 100644
--- a/original/uapi/linux/nl80211.h
+++ b/original/uapi/linux/nl80211.h
@@ -72,7 +72,7 @@
  * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
  * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
  *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
+ *    or capability information; this just exists to avoid race conditions
  *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
  *    to add rate and capability information to the station and at the same
  *    time mark it authorized.
@@ -87,7 +87,7 @@
  * DOC: Frame transmission/registration support
  *
  * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
  * that are not being handled by the kernel. This includes, for example,
  * certain classes of action frames that cannot be handled in the kernel
  * for various reasons.
@@ -113,7 +113,7 @@
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
@@ -123,7 +123,7 @@
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
@@ -135,7 +135,7 @@
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@@ -164,7 +164,7 @@
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
  * b) Coalescing buffer in hardware reaches its limit.
@@ -174,7 +174,7 @@
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 
@@ -213,7 +213,7 @@
 /**
  * DOC: FILS shared key authentication offload
  *
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
@@ -239,7 +239,7 @@
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@@ -290,12 +290,12 @@
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * any peers that have peer-specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
+ * All this configuration is valid only for STA's current connection,
+ * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
@@ -521,7 +521,7 @@
  *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
+ *	These attributes are mutually exclusive,
  *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *	If for some reason scheduled scan is aborted by the driver, all scan
@@ -552,7 +552,7 @@
  *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *	is brought down while a scheduled scan was running.
  *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@@ -563,12 +563,13 @@
  *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	advertised by a FILS capable AP identifying the scope of PMKSA in an
  *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
+ *	authentication. Additionally in case of SAE offload and OWE offloads
+ *	PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@@ -607,7 +608,7 @@
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
  *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *	authentication type. %NL80211_ATTR_IE is used to define IEs
  *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@@ -816,7 +817,7 @@
  *	reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	(identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *	In case multiple channels are supported by the device, the mechanism
  *	with which it switches channels is implementation-defined.
  *	When a monitor interface is given, it can only switch channel while
@@ -888,7 +889,7 @@
  *	inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
+ *	of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *	In addition, this can be used as an event to request userspace to take
@@ -924,7 +925,7 @@
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	acknowledged. This is used to allow timing out inactive clients. Uses
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *	up the event with the request. The event includes the same data and
@@ -1135,11 +1136,15 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- *	completed successfully. Drivers that support 4 way handshake offload
- *	should send this event after indicating 802.1X FT assocation with
- *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- *	should be indicated instead.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
+ *	open for regular data traffic. For STA/P2P-client, this event is sent
+ *	with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
+ *	client MAC address.
+ *	Drivers that support 4 way handshake offload should send this event for
+ *	STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ *	NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ *	handshake offload should send this event on successful completion of
+ *	4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
@@ -1323,6 +1328,11 @@
  *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
  *	information about the removed STA MLD setup links.
  *
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ *      TID to Link mapping for downlink/uplink traffic.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1578,6 +1588,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_LINKS_REMOVED,
 
+	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1835,7 +1847,7 @@ enum nl80211_commands {
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
+ *	frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -1972,10 +1984,10 @@ enum nl80211_commands {
  *	bit. Depending on which antennas are selected in the bitmap, 802.11n
  *	drivers can derive which chainmasks to use (if all antennas belonging to
  *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
+ *	a chain has diversity antennas whether diversity should be used or not.
  *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Non-802.11n drivers can derive whether to use diversity or not.
  *	Drivers may reject configurations or RX/TX mask combinations they cannot
  *	support by returning -EINVAL.
  *
@@ -2545,7 +2557,7 @@ enum nl80211_commands {
  *	from successful FILS authentication and is used with
  *	%NL80211_CMD_CONNECT.
  *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
@@ -2826,6 +2838,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
  *	disabled.
  *
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ *	include BSSes that can only be used in restricted scenarios and/or
+ *	cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3364,6 +3389,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MLO_LINK_DISABLED,
 
+	NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+
+	NL80211_ATTR_MLO_TTLM_DLINK,
+	NL80211_ATTR_MLO_TTLM_ULINK,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4170,7 +4200,7 @@ enum nl80211_wmm_rule {
  *	(100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *	this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *	channel as the control channel
@@ -4226,6 +4256,14 @@ enum nl80211_wmm_rule {
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4265,6 +4303,9 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4470,6 +4511,12 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+	peer-to-peer or adhoc communication under the control of a DFS master
+	which operates on the same channel (FCC-594280 D01 Section B.3).
+	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4491,6 +4538,9 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -5028,6 +5078,33 @@ enum nl80211_bss_scan_width {
 };
 
 /**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ *	including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ *	MLO connection. Note that for an MLO connection, all links including
+ *	the assoc link must have this flag set, and the assoc link must
+ *	additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+	NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+	NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ *	BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
+};
+
+/**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
@@ -5079,6 +5156,14 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ *	used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ *	be used for all or some of the possible uses by the device reporting it,
+ *	even though its presence was detected.
+ *	This is a u64 attribute containing a bitmap of values from
+ *	&enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ *	if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -5106,6 +5191,8 @@ enum nl80211_bss {
 	NL80211_BSS_FREQUENCY_OFFSET,
 	NL80211_BSS_MLO_LINK_ID,
 	NL80211_BSS_MLD_ADDR,
+	NL80211_BSS_USE_FOR,
+	NL80211_BSS_CANNOT_USE_REASONS,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -5454,7 +5541,7 @@ enum nl80211_tx_rate_setting {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *	that the new configuration overrides all previous peer
  *	configurations, otherwise previous peer specific configurations
  *	should be left untouched.
@@ -5837,7 +5924,7 @@ enum nl80211_attr_coalesce_rule {
 
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *	in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *	in a rule are not matched.
@@ -5936,7 +6023,7 @@ enum nl80211_if_combination_attrs {
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
+ *	state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *	this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -6229,7 +6316,7 @@ enum nl80211_feature_flags {
  *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
+ *	NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *	sniffer which means that it can be configured to hear packets from
  *	certain groups which can be configured by the
@@ -6241,13 +6328,15 @@ enum nl80211_feature_flags {
  *	the BSS that the interface that requested the scan is connected to
  *	(if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
+ *	time the last beacon/probe was received. For a non-MLO connection, the
+ *	time is the TSF of the BSS that the interface that requested the scan is
+ *	connected to (if available). For an MLO connection, the time is the TSF
+ *	of the BSS corresponding with link ID specified in the scan request (if
+ *	specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ *	configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@@ -6426,6 +6515,11 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *	handling in AP mode.
  *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6499,6 +6593,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6583,7 +6678,7 @@ enum nl80211_timeout_reason {
  *	request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ *	rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *	only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -6619,7 +6714,7 @@ enum nl80211_timeout_reason {
  *	received on the 2.4/5 GHz channels to actively scan only the 6GHz
  *	channels on which APs are expected to be found. Note that when not set,
  *	the scan logic would scan all 6GHz channels, but since transmission of
- *	probe requests on non PSC channels is limited, it is highly likely that
+ *	probe requests on non-PSC channels is limited, it is highly likely that
  *	these channels would passively be scanned. Also note that when the flag
  *	is set, in addition to the colocated APs, PSC channels would also be
  *	scanned if the user space has asked for it.
@@ -6951,7 +7046,7 @@ enum nl80211_nan_func_term_reason {
  *	The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
+ *	The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *	follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@@ -7341,7 +7436,7 @@ enum nl80211_peer_measurement_attrs {
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
+ *	if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7395,7 +7490,7 @@ enum nl80211_peer_measurement_ftm_capa {
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *	ranging measurement (flag)
  *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *	mutually exclusive.
@@ -7473,7 +7568,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *	transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
+ *	that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *	busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
diff --git a/original/uapi/linux/nsm.h b/original/uapi/linux/nsm.h
new file mode 100644
index 0000000..e529f23
--- /dev/null
+++ b/original/uapi/linux/nsm.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#ifndef __UAPI_LINUX_NSM_H
+#define __UAPI_LINUX_NSM_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define NSM_MAGIC		0x0A
+
+#define NSM_REQUEST_MAX_SIZE	0x1000
+#define NSM_RESPONSE_MAX_SIZE	0x3000
+
+struct nsm_iovec {
+	__u64 addr; /* Virtual address of target buffer */
+	__u64 len;  /* Length of target buffer */
+};
+
+/* Raw NSM message. Only available with CAP_SYS_ADMIN. */
+struct nsm_raw {
+	/* Request from user */
+	struct nsm_iovec request;
+	/* Response to user */
+	struct nsm_iovec response;
+};
+#define NSM_IOCTL_RAW		_IOWR(NSM_MAGIC, 0x0, struct nsm_raw)
+
+#endif /* __UAPI_LINUX_NSM_H */
diff --git a/original/uapi/linux/pcitest.h b/original/uapi/linux/pcitest.h
index f9c1af8..94b46b0 100644
--- a/original/uapi/linux/pcitest.h
+++ b/original/uapi/linux/pcitest.h
@@ -11,7 +11,8 @@
 #define __UAPI_LINUX_PCITEST_H
 
 #define PCITEST_BAR		_IO('P', 0x1)
-#define PCITEST_LEGACY_IRQ	_IO('P', 0x2)
+#define PCITEST_INTX_IRQ	_IO('P', 0x2)
+#define PCITEST_LEGACY_IRQ	PCITEST_INTX_IRQ
 #define PCITEST_MSI		_IOW('P', 0x3, int)
 #define PCITEST_WRITE		_IOW('P', 0x4, unsigned long)
 #define PCITEST_READ		_IOW('P', 0x5, unsigned long)
diff --git a/original/uapi/linux/perf_event.h b/original/uapi/linux/perf_event.h
index 39c6a25..3a64499 100644
--- a/original/uapi/linux/perf_event.h
+++ b/original/uapi/linux/perf_event.h
@@ -204,6 +204,8 @@ enum perf_branch_sample_type_shift {
 
 	PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT	= 18, /* save privilege mode */
 
+	PERF_SAMPLE_BRANCH_COUNTERS_SHIFT	= 19, /* save occurrences of events on a branch */
+
 	PERF_SAMPLE_BRANCH_MAX_SHIFT		/* non-ABI */
 };
 
@@ -235,6 +237,8 @@ enum perf_branch_sample_type {
 
 	PERF_SAMPLE_BRANCH_PRIV_SAVE	= 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT,
 
+	PERF_SAMPLE_BRANCH_COUNTERS	= 1U << PERF_SAMPLE_BRANCH_COUNTERS_SHIFT,
+
 	PERF_SAMPLE_BRANCH_MAX		= 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT,
 };
 
@@ -982,6 +986,12 @@ enum perf_event_type {
 	 *	{ u64                   nr;
 	 *	  { u64	hw_idx; } && PERF_SAMPLE_BRANCH_HW_INDEX
 	 *        { u64 from, to, flags } lbr[nr];
+	 *        #
+	 *        # The format of the counters is decided by the
+	 *        # "branch_counter_nr" and "branch_counter_width",
+	 *        # which are defined in the ABI.
+	 *        #
+	 *        { u64 counters; } cntr[nr] && PERF_SAMPLE_BRANCH_COUNTERS
 	 *      } && PERF_SAMPLE_BRANCH_STACK
 	 *
 	 * 	{ u64			abi; # enum perf_sample_regs_abi
@@ -1427,6 +1437,9 @@ struct perf_branch_entry {
 		reserved:31;
 };
 
+/* Size of used info bits in struct perf_branch_entry */
+#define PERF_BRANCH_ENTRY_INFO_BITS_MAX		33
+
 union perf_sample_weight {
 	__u64		full;
 #if defined(__LITTLE_ENDIAN_BITFIELD)
diff --git a/original/uapi/linux/pkt_cls.h b/original/uapi/linux/pkt_cls.h
index c7082cc..ea27703 100644
--- a/original/uapi/linux/pkt_cls.h
+++ b/original/uapi/linux/pkt_cls.h
@@ -99,7 +99,7 @@ enum {
  * versions.
  */
 #define TCA_ACT_GACT 5
-#define TCA_ACT_IPT 6
+#define TCA_ACT_IPT 6 /* obsoleted, can be reused */
 #define TCA_ACT_PEDIT 7
 #define TCA_ACT_MIRRED 8
 #define TCA_ACT_NAT 9
@@ -120,7 +120,7 @@ enum tca_id {
 	TCA_ID_UNSPEC = 0,
 	TCA_ID_POLICE = 1,
 	TCA_ID_GACT = TCA_ACT_GACT,
-	TCA_ID_IPT = TCA_ACT_IPT,
+	TCA_ID_IPT = TCA_ACT_IPT, /* Obsoleted, can be reused */
 	TCA_ID_PEDIT = TCA_ACT_PEDIT,
 	TCA_ID_MIRRED = TCA_ACT_MIRRED,
 	TCA_ID_NAT = TCA_ACT_NAT,
@@ -280,37 +280,6 @@ struct tc_u32_pcnt {
 
 #define TC_U32_MAXDEPTH 8
 
-
-/* RSVP filter */
-
-enum {
-	TCA_RSVP_UNSPEC,
-	TCA_RSVP_CLASSID,
-	TCA_RSVP_DST,
-	TCA_RSVP_SRC,
-	TCA_RSVP_PINFO,
-	TCA_RSVP_POLICE,
-	TCA_RSVP_ACT,
-	__TCA_RSVP_MAX
-};
-
-#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
-
-struct tc_rsvp_gpi {
-	__u32	key;
-	__u32	mask;
-	int	offset;
-};
-
-struct tc_rsvp_pinfo {
-	struct tc_rsvp_gpi dpi;
-	struct tc_rsvp_gpi spi;
-	__u8	protocol;
-	__u8	tunnelid;
-	__u8	tunnelhdr;
-	__u8	pad;
-};
-
 /* ROUTE filter */
 
 enum {
@@ -341,22 +310,6 @@ enum {
 
 #define TCA_FW_MAX (__TCA_FW_MAX - 1)
 
-/* TC index filter */
-
-enum {
-	TCA_TCINDEX_UNSPEC,
-	TCA_TCINDEX_HASH,
-	TCA_TCINDEX_MASK,
-	TCA_TCINDEX_SHIFT,
-	TCA_TCINDEX_FALL_THROUGH,
-	TCA_TCINDEX_CLASSID,
-	TCA_TCINDEX_POLICE,
-	TCA_TCINDEX_ACT,
-	__TCA_TCINDEX_MAX
-};
-
-#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
-
 /* Flow filter */
 
 enum {
diff --git a/original/uapi/linux/pkt_sched.h b/original/uapi/linux/pkt_sched.h
index f762a10..a3cd0c2 100644
--- a/original/uapi/linux/pkt_sched.h
+++ b/original/uapi/linux/pkt_sched.h
@@ -477,115 +477,6 @@ enum {
 
 #define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
 
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO		8
-#define TC_CBQ_MAXLEVEL		8
-#define TC_CBQ_DEF_EWMA		5
-
-struct tc_cbq_lssopt {
-	unsigned char	change;
-	unsigned char	flags;
-#define TCF_CBQ_LSS_BOUNDED	1
-#define TCF_CBQ_LSS_ISOLATED	2
-	unsigned char  	ewma_log;
-	unsigned char  	level;
-#define TCF_CBQ_LSS_FLAGS	1
-#define TCF_CBQ_LSS_EWMA	2
-#define TCF_CBQ_LSS_MAXIDLE	4
-#define TCF_CBQ_LSS_MINIDLE	8
-#define TCF_CBQ_LSS_OFFTIME	0x10
-#define TCF_CBQ_LSS_AVPKT	0x20
-	__u32		maxidle;
-	__u32		minidle;
-	__u32		offtime;
-	__u32		avpkt;
-};
-
-struct tc_cbq_wrropt {
-	unsigned char	flags;
-	unsigned char	priority;
-	unsigned char	cpriority;
-	unsigned char	__reserved;
-	__u32		allot;
-	__u32		weight;
-};
-
-struct tc_cbq_ovl {
-	unsigned char	strategy;
-#define	TC_CBQ_OVL_CLASSIC	0
-#define	TC_CBQ_OVL_DELAY	1
-#define	TC_CBQ_OVL_LOWPRIO	2
-#define	TC_CBQ_OVL_DROP		3
-#define	TC_CBQ_OVL_RCLASSIC	4
-	unsigned char	priority2;
-	__u16		pad;
-	__u32		penalty;
-};
-
-struct tc_cbq_police {
-	unsigned char	police;
-	unsigned char	__res1;
-	unsigned short	__res2;
-};
-
-struct tc_cbq_fopt {
-	__u32		split;
-	__u32		defmap;
-	__u32		defchange;
-};
-
-struct tc_cbq_xstats {
-	__u32		borrows;
-	__u32		overactions;
-	__s32		avgidle;
-	__s32		undertime;
-};
-
-enum {
-	TCA_CBQ_UNSPEC,
-	TCA_CBQ_LSSOPT,
-	TCA_CBQ_WRROPT,
-	TCA_CBQ_FOPT,
-	TCA_CBQ_OVL_STRATEGY,
-	TCA_CBQ_RATE,
-	TCA_CBQ_RTAB,
-	TCA_CBQ_POLICE,
-	__TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
-	TCA_DSMARK_UNSPEC,
-	TCA_DSMARK_INDICES,
-	TCA_DSMARK_DEFAULT_INDEX,
-	TCA_DSMARK_SET_TC_INDEX,
-	TCA_DSMARK_MASK,
-	TCA_DSMARK_VALUE,
-	__TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM  section */
-
-enum {
-	TCA_ATM_UNSPEC,
-	TCA_ATM_FD,		/* file/socket descriptor */
-	TCA_ATM_PTR,		/* pointer to descriptor - later */
-	TCA_ATM_HDR,		/* LL header */
-	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
-	TCA_ATM_ADDR,		/* PVC address (for output only) */
-	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
-	__TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
-
 /* Network emulator */
 
 enum {
diff --git a/original/uapi/linux/raid/md_p.h b/original/uapi/linux/raid/md_p.h
index 6c0aa57..5a43c23 100644
--- a/original/uapi/linux/raid/md_p.h
+++ b/original/uapi/linux/raid/md_p.h
@@ -2,15 +2,11 @@
 /*
    md_p.h : physical layout of Linux RAID devices
           Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
-	  
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
 #ifndef _MD_P_H
@@ -237,7 +233,7 @@ struct mdp_superblock_1 {
 	char	set_name[32];	/* set and interpreted by user-space */
 
 	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
-	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
+	__le32	level;		/* 0,1,4,5 */
 	__le32	layout;		/* only for raid5 and raid10 currently */
 	__le64	size;		/* used size of component devices, in 512byte sectors */
 
diff --git a/original/uapi/linux/raid/md_u.h b/original/uapi/linux/raid/md_u.h
index 1053072..7be89a4 100644
--- a/original/uapi/linux/raid/md_u.h
+++ b/original/uapi/linux/raid/md_u.h
@@ -2,15 +2,11 @@
 /*
    md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
           Copyright (C) 1998 Ingo Molnar
-	  
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
 #ifndef _UAPI_MD_U_H
@@ -107,11 +103,6 @@ typedef struct mdu_array_info_s {
 
 } mdu_array_info_t;
 
-/* non-obvious values for 'level' */
-#define	LEVEL_MULTIPATH		(-4)
-#define	LEVEL_LINEAR		(-1)
-#define	LEVEL_FAULTY		(-5)
-
 /* we need a value for 'no level specified' and 0
  * means 'raid0', so we need something else.  This is
  * for internal use only
diff --git a/original/uapi/linux/resource.h b/original/uapi/linux/resource.h
index ac5d6a3..4fc2290 100644
--- a/original/uapi/linux/resource.h
+++ b/original/uapi/linux/resource.h
@@ -2,7 +2,7 @@
 #ifndef _UAPI_LINUX_RESOURCE_H
 #define _UAPI_LINUX_RESOURCE_H
 
-#include <linux/time.h>
+#include <linux/time_types.h>
 #include <linux/types.h>
 
 /*
diff --git a/original/uapi/linux/serial.h b/original/uapi/linux/serial.h
index 53bc1af..de9b473 100644
--- a/original/uapi/linux/serial.h
+++ b/original/uapi/linux/serial.h
@@ -11,6 +11,7 @@
 #ifndef _UAPI_LINUX_SERIAL_H
 #define _UAPI_LINUX_SERIAL_H
 
+#include <linux/const.h>
 #include <linux/types.h>
 
 #include <linux/tty_flags.h>
@@ -137,17 +138,20 @@ struct serial_icounter_struct {
  * * %SER_RS485_ADDRB		- Enable RS485 addressing mode.
  * * %SER_RS485_ADDR_RECV - Receive address filter (enables @addr_recv). Requires %SER_RS485_ADDRB.
  * * %SER_RS485_ADDR_DEST - Destination address (enables @addr_dest). Requires %SER_RS485_ADDRB.
+ * * %SER_RS485_MODE_RS422	- Enable RS422. Requires %SER_RS485_ENABLED.
  */
 struct serial_rs485 {
 	__u32	flags;
-#define SER_RS485_ENABLED		(1 << 0)
-#define SER_RS485_RTS_ON_SEND		(1 << 1)
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-#define SER_RS485_TERMINATE_BUS		(1 << 5)
-#define SER_RS485_ADDRB			(1 << 6)
-#define SER_RS485_ADDR_RECV		(1 << 7)
-#define SER_RS485_ADDR_DEST		(1 << 8)
+#define SER_RS485_ENABLED		_BITUL(0)
+#define SER_RS485_RTS_ON_SEND		_BITUL(1)
+#define SER_RS485_RTS_AFTER_SEND	_BITUL(2)
+/* Placeholder for bit 3: SER_RS485_RTS_BEFORE_SEND, which isn't used anymore */
+#define SER_RS485_RX_DURING_TX		_BITUL(4)
+#define SER_RS485_TERMINATE_BUS		_BITUL(5)
+#define SER_RS485_ADDRB			_BITUL(6)
+#define SER_RS485_ADDR_RECV		_BITUL(7)
+#define SER_RS485_ADDR_DEST		_BITUL(8)
+#define SER_RS485_MODE_RS422		_BITUL(9)
 
 	__u32	delay_rts_before_send;
 	__u32	delay_rts_after_send;
diff --git a/original/uapi/linux/smc.h b/original/uapi/linux/smc.h
index 837fcd4..b531e3e 100644
--- a/original/uapi/linux/smc.h
+++ b/original/uapi/linux/smc.h
@@ -160,6 +160,8 @@ enum {
 	SMC_NLA_LGR_D_CHID,		/* u16 */
 	SMC_NLA_LGR_D_PAD,		/* flag */
 	SMC_NLA_LGR_D_V2_COMMON,	/* nest */
+	SMC_NLA_LGR_D_EXT_GID,		/* u64 */
+	SMC_NLA_LGR_D_PEER_EXT_GID,	/* u64 */
 	__SMC_NLA_LGR_D_MAX,
 	SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1
 };
diff --git a/original/uapi/linux/smc_diag.h b/original/uapi/linux/smc_diag.h
index 8cb3a6f..58eceb7 100644
--- a/original/uapi/linux/smc_diag.h
+++ b/original/uapi/linux/smc_diag.h
@@ -107,6 +107,8 @@ struct smcd_diag_dmbinfo {		/* SMC-D Socket internals */
 	__aligned_u64	my_gid;		/* My GID */
 	__aligned_u64	token;		/* Token of DMB */
 	__aligned_u64	peer_token;	/* Token of remote DMBE */
+	__aligned_u64	peer_gid_ext;	/* Peer GID (extended part) */
+	__aligned_u64	my_gid_ext;	/* My GID (extended part) */
 };
 
 #endif /* _UAPI_SMC_DIAG_H_ */
diff --git a/original/uapi/linux/stat.h b/original/uapi/linux/stat.h
index 7cab2c6..2f2ee82 100644
--- a/original/uapi/linux/stat.h
+++ b/original/uapi/linux/stat.h
@@ -154,6 +154,7 @@ struct statx {
 #define STATX_BTIME		0x00000800U	/* Want/got stx_btime */
 #define STATX_MNT_ID		0x00001000U	/* Got stx_mnt_id */
 #define STATX_DIOALIGN		0x00002000U	/* Want/got direct I/O alignment info */
+#define STATX_MNT_ID_UNIQUE	0x00004000U	/* Want/got extended stx_mount_id */
 
 #define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
 
diff --git a/original/uapi/linux/sync_file.h b/original/uapi/linux/sync_file.h
index ff0a931..ff1f388 100644
--- a/original/uapi/linux/sync_file.h
+++ b/original/uapi/linux/sync_file.h
@@ -76,6 +76,27 @@ struct sync_file_info {
 	__u64	sync_fence_info;
 };
 
+/**
+ * struct sync_set_deadline - SYNC_IOC_SET_DEADLINE - set a deadline hint on a fence
+ * @deadline_ns: absolute time of the deadline
+ * @pad:	must be zero
+ *
+ * Allows userspace to set a deadline on a fence, see &dma_fence_set_deadline
+ *
+ * The timebase for the deadline is CLOCK_MONOTONIC (same as vblank).  For
+ * example
+ *
+ *     clock_gettime(CLOCK_MONOTONIC, &t);
+ *     deadline_ns = (t.tv_sec * 1000000000L) + t.tv_nsec + ns_until_deadline
+ */
+struct sync_set_deadline {
+	__u64	deadline_ns;
+	/* Not strictly needed for alignment but gives some possibility
+	 * for future extension:
+	 */
+	__u64	pad;
+};
+
 #define SYNC_IOC_MAGIC		'>'
 
 /*
@@ -87,5 +108,6 @@ struct sync_file_info {
 
 #define SYNC_IOC_MERGE		_IOWR(SYNC_IOC_MAGIC, 3, struct sync_merge_data)
 #define SYNC_IOC_FILE_INFO	_IOWR(SYNC_IOC_MAGIC, 4, struct sync_file_info)
+#define SYNC_IOC_SET_DEADLINE	_IOW(SYNC_IOC_MAGIC, 5, struct sync_set_deadline)
 
 #endif /* _UAPI_LINUX_SYNC_H */
diff --git a/original/uapi/linux/tc_act/tc_ipt.h b/original/uapi/linux/tc_act/tc_ipt.h
deleted file mode 100644
index c48d7da..0000000
--- a/original/uapi/linux/tc_act/tc_ipt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __LINUX_TC_IPT_H
-#define __LINUX_TC_IPT_H
-
-#include <linux/pkt_cls.h>
-
-enum {
-	TCA_IPT_UNSPEC,
-	TCA_IPT_TABLE,
-	TCA_IPT_HOOK,
-	TCA_IPT_INDEX,
-	TCA_IPT_CNT,
-	TCA_IPT_TM,
-	TCA_IPT_TARG,
-	TCA_IPT_PAD,
-	__TCA_IPT_MAX
-};
-#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
-                                                                                
-#endif
diff --git a/original/uapi/linux/tc_act/tc_mirred.h b/original/uapi/linux/tc_act/tc_mirred.h
index 2500a00..c61e76f 100644
--- a/original/uapi/linux/tc_act/tc_mirred.h
+++ b/original/uapi/linux/tc_act/tc_mirred.h
@@ -21,6 +21,7 @@ enum {
 	TCA_MIRRED_TM,
 	TCA_MIRRED_PARMS,
 	TCA_MIRRED_PAD,
+	TCA_MIRRED_BLOCKID,
 	__TCA_MIRRED_MAX
 };
 #define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)
diff --git a/original/uapi/linux/thp7312.h b/original/uapi/linux/thp7312.h
new file mode 100644
index 0000000..2b629e0
--- /dev/null
+++ b/original/uapi/linux/thp7312.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * THine THP7312 user space header file.
+ *
+ * Copyright (C) 2021 THine Electronics, Inc.
+ * Copyright (C) 2023 Ideas on Board Oy
+ */
+
+#ifndef __UAPI_THP7312_H_
+#define __UAPI_THP7312_H_
+
+#include <linux/v4l2-controls.h>
+
+#define V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION		(V4L2_CID_USER_THP7312_BASE + 0x01)
+#define V4L2_CID_THP7312_AUTO_FOCUS_METHOD		(V4L2_CID_USER_THP7312_BASE + 0x02)
+#define V4L2_CID_THP7312_NOISE_REDUCTION_AUTO		(V4L2_CID_USER_THP7312_BASE + 0x03)
+#define V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE	(V4L2_CID_USER_THP7312_BASE + 0x04)
+
+#endif /* __UAPI_THP7312_H_ */
diff --git a/original/uapi/linux/usb/functionfs.h b/original/uapi/linux/usb/functionfs.h
index d77ee6b..078098e 100644
--- a/original/uapi/linux/usb/functionfs.h
+++ b/original/uapi/linux/usb/functionfs.h
@@ -73,8 +73,10 @@ struct usb_os_desc_header {
 struct usb_ext_compat_desc {
 	__u8	bFirstInterfaceNumber;
 	__u8	Reserved1;
-	__u8	CompatibleID[8];
-	__u8	SubCompatibleID[8];
+	__struct_group(/* no tag */, IDs, /* no attrs */,
+		__u8	CompatibleID[8];
+		__u8	SubCompatibleID[8];
+	);
 	__u8	Reserved2[6];
 };
 
diff --git a/original/uapi/linux/userfaultfd.h b/original/uapi/linux/userfaultfd.h
index 0dbc810..2841e4e 100644
--- a/original/uapi/linux/userfaultfd.h
+++ b/original/uapi/linux/userfaultfd.h
@@ -41,7 +41,8 @@
 			   UFFD_FEATURE_WP_HUGETLBFS_SHMEM |	\
 			   UFFD_FEATURE_WP_UNPOPULATED |	\
 			   UFFD_FEATURE_POISON |		\
-			   UFFD_FEATURE_WP_ASYNC)
+			   UFFD_FEATURE_WP_ASYNC |		\
+			   UFFD_FEATURE_MOVE)
 #define UFFD_API_IOCTLS				\
 	((__u64)1 << _UFFDIO_REGISTER |		\
 	 (__u64)1 << _UFFDIO_UNREGISTER |	\
@@ -50,6 +51,7 @@
 	((__u64)1 << _UFFDIO_WAKE |		\
 	 (__u64)1 << _UFFDIO_COPY |		\
 	 (__u64)1 << _UFFDIO_ZEROPAGE |		\
+	 (__u64)1 << _UFFDIO_MOVE |		\
 	 (__u64)1 << _UFFDIO_WRITEPROTECT |	\
 	 (__u64)1 << _UFFDIO_CONTINUE |		\
 	 (__u64)1 << _UFFDIO_POISON)
@@ -73,6 +75,7 @@
 #define _UFFDIO_WAKE			(0x02)
 #define _UFFDIO_COPY			(0x03)
 #define _UFFDIO_ZEROPAGE		(0x04)
+#define _UFFDIO_MOVE			(0x05)
 #define _UFFDIO_WRITEPROTECT		(0x06)
 #define _UFFDIO_CONTINUE		(0x07)
 #define _UFFDIO_POISON			(0x08)
@@ -92,6 +95,8 @@
 				      struct uffdio_copy)
 #define UFFDIO_ZEROPAGE		_IOWR(UFFDIO, _UFFDIO_ZEROPAGE,	\
 				      struct uffdio_zeropage)
+#define UFFDIO_MOVE		_IOWR(UFFDIO, _UFFDIO_MOVE,	\
+				      struct uffdio_move)
 #define UFFDIO_WRITEPROTECT	_IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \
 				      struct uffdio_writeprotect)
 #define UFFDIO_CONTINUE		_IOWR(UFFDIO, _UFFDIO_CONTINUE,	\
@@ -222,6 +227,9 @@ struct uffdio_api {
 	 * asynchronous mode is supported in which the write fault is
 	 * automatically resolved and write-protection is un-set.
 	 * It implies UFFD_FEATURE_WP_UNPOPULATED.
+	 *
+	 * UFFD_FEATURE_MOVE indicates that the kernel supports moving an
+	 * existing page contents from userspace.
 	 */
 #define UFFD_FEATURE_PAGEFAULT_FLAG_WP		(1<<0)
 #define UFFD_FEATURE_EVENT_FORK			(1<<1)
@@ -239,6 +247,7 @@ struct uffdio_api {
 #define UFFD_FEATURE_WP_UNPOPULATED		(1<<13)
 #define UFFD_FEATURE_POISON			(1<<14)
 #define UFFD_FEATURE_WP_ASYNC			(1<<15)
+#define UFFD_FEATURE_MOVE			(1<<16)
 	__u64 features;
 
 	__u64 ioctls;
@@ -347,6 +356,24 @@ struct uffdio_poison {
 	__s64 updated;
 };
 
+struct uffdio_move {
+	__u64 dst;
+	__u64 src;
+	__u64 len;
+	/*
+	 * Especially if used to atomically remove memory from the
+	 * address space the wake on the dst range is not needed.
+	 */
+#define UFFDIO_MOVE_MODE_DONTWAKE		((__u64)1<<0)
+#define UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES	((__u64)1<<1)
+	__u64 mode;
+	/*
+	 * "move" is written by the ioctl and must be at the end: the
+	 * copy_from_user will not read the last 8 bytes.
+	 */
+	__s64 move;
+};
+
 /*
  * Flags for the userfaultfd(2) system call itself.
  */
diff --git a/original/uapi/linux/v4l2-controls.h b/original/uapi/linux/v4l2-controls.h
index 68db66d..99c3f5e 100644
--- a/original/uapi/linux/v4l2-controls.h
+++ b/original/uapi/linux/v4l2-controls.h
@@ -209,6 +209,12 @@ enum v4l2_colorfx {
  */
 #define V4L2_CID_USER_NPCM_BASE			(V4L2_CID_USER_BASE + 0x11b0)
 
+/*
+ * The base for THine THP7312 driver controls.
+ * We reserve 32 controls for this driver.
+ */
+#define V4L2_CID_USER_THP7312_BASE		(V4L2_CID_USER_BASE + 0x11c0)
+
 /* MPEG-class control IDs */
 /* The MPEG controls are applicable to all codec controls
  * and the 'MPEG' part of the define is historical */
diff --git a/original/uapi/linux/v4l2-subdev.h b/original/uapi/linux/v4l2-subdev.h
index b383c2f..7048c51 100644
--- a/original/uapi/linux/v4l2-subdev.h
+++ b/original/uapi/linux/v4l2-subdev.h
@@ -116,13 +116,15 @@ struct v4l2_subdev_frame_size_enum {
  * @pad: pad number, as reported by the media API
  * @interval: frame interval in seconds
  * @stream: stream number, defined in subdev routing
+ * @which: interval type (from enum v4l2_subdev_format_whence)
  * @reserved: drivers and applications must zero this array
  */
 struct v4l2_subdev_frame_interval {
 	__u32 pad;
 	struct v4l2_fract interval;
 	__u32 stream;
-	__u32 reserved[8];
+	__u32 which;
+	__u32 reserved[7];
 };
 
 /**
@@ -133,7 +135,7 @@ struct v4l2_subdev_frame_interval {
  * @width: frame width in pixels
  * @height: frame height in pixels
  * @interval: frame interval in seconds
- * @which: format type (from enum v4l2_subdev_format_whence)
+ * @which: interval type (from enum v4l2_subdev_format_whence)
  * @stream: stream number, defined in subdev routing
  * @reserved: drivers and applications must zero this array
  */
@@ -239,7 +241,14 @@ struct v4l2_subdev_routing {
  * set (which is the default), the 'stream' fields will be forced to 0 by the
  * kernel.
  */
- #define V4L2_SUBDEV_CLIENT_CAP_STREAMS		(1ULL << 0)
+#define V4L2_SUBDEV_CLIENT_CAP_STREAMS			(1ULL << 0)
+
+/*
+ * The client is aware of the struct v4l2_subdev_frame_interval which field. If
+ * this is not set (which is the default), the which field is forced to
+ * V4L2_SUBDEV_FORMAT_ACTIVE by the kernel.
+ */
+#define V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH	(1ULL << 1)
 
 /**
  * struct v4l2_subdev_client_capability - Capabilities of the client accessing
diff --git a/original/uapi/linux/version.h b/original/uapi/linux/version.h
index 3d8cd65..c64f2cb 100644
--- a/original/uapi/linux/version.h
+++ b/original/uapi/linux/version.h
@@ -1,5 +1,5 @@
-#define LINUX_VERSION_CODE 395008
+#define LINUX_VERSION_CODE 395264
 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
 #define LINUX_VERSION_MAJOR 6
-#define LINUX_VERSION_PATCHLEVEL 7
+#define LINUX_VERSION_PATCHLEVEL 8
 #define LINUX_VERSION_SUBLEVEL 0
diff --git a/original/uapi/linux/vfio.h b/original/uapi/linux/vfio.h
index 7f5fb01..2b68e6c 100644
--- a/original/uapi/linux/vfio.h
+++ b/original/uapi/linux/vfio.h
@@ -1219,6 +1219,7 @@ enum vfio_device_mig_state {
 	VFIO_DEVICE_STATE_RUNNING_P2P = 5,
 	VFIO_DEVICE_STATE_PRE_COPY = 6,
 	VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
+	VFIO_DEVICE_STATE_NR,
 };
 
 /**
diff --git a/original/uapi/linux/videodev2.h b/original/uapi/linux/videodev2.h
index 9ed33c4..708245c 100644
--- a/original/uapi/linux/videodev2.h
+++ b/original/uapi/linux/videodev2.h
@@ -1035,6 +1035,7 @@ struct v4l2_requestbuffers {
 #define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS		(1 << 4)
 #define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF	(1 << 5)
 #define V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS		(1 << 6)
+#define V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS		(1 << 7)
 
 /**
  * struct v4l2_plane - plane info for multi-planar buffers
@@ -1816,7 +1817,7 @@ struct v4l2_ext_control {
 		__s64 __user *p_s64;
 		struct v4l2_area __user *p_area;
 		struct v4l2_ctrl_h264_sps __user *p_h264_sps;
-		struct v4l2_ctrl_h264_pps *p_h264_pps;
+		struct v4l2_ctrl_h264_pps __user *p_h264_pps;
 		struct v4l2_ctrl_h264_scaling_matrix __user *p_h264_scaling_matrix;
 		struct v4l2_ctrl_h264_pred_weights __user *p_h264_pred_weights;
 		struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params;
@@ -1837,6 +1838,8 @@ struct v4l2_ext_control {
 		struct v4l2_ctrl_av1_tile_group_entry __user *p_av1_tile_group_entry;
 		struct v4l2_ctrl_av1_frame __user *p_av1_frame;
 		struct v4l2_ctrl_av1_film_grain __user *p_av1_film_grain;
+		struct v4l2_ctrl_hdr10_cll_info __user *p_hdr10_cll_info;
+		struct v4l2_ctrl_hdr10_mastering_display __user *p_hdr10_mastering_display;
 		void __user *ptr;
 	};
 } __attribute__ ((packed));
@@ -2605,6 +2608,9 @@ struct v4l2_dbg_chip_info {
  * @flags:	additional buffer management attributes (ignored unless the
  *		queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
  *		and configured for MMAP streaming I/O).
+ * @max_num_buffers: if V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set
+ *		this field indicate the maximum possible number of buffers
+ *		for this queue.
  * @reserved:	future extensions
  */
 struct v4l2_create_buffers {
@@ -2614,7 +2620,8 @@ struct v4l2_create_buffers {
 	struct v4l2_format	format;
 	__u32			capabilities;
 	__u32			flags;
-	__u32			reserved[6];
+	__u32			max_num_buffers;
+	__u32			reserved[5];
 };
 
 /*
diff --git a/original/uapi/linux/virtio_config.h b/original/uapi/linux/virtio_config.h
index 8881aea..2445f36 100644
--- a/original/uapi/linux/virtio_config.h
+++ b/original/uapi/linux/virtio_config.h
@@ -52,7 +52,7 @@
  * rest are per-device feature bits.
  */
 #define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		41
+#define VIRTIO_TRANSPORT_F_END		42
 
 #ifndef VIRTIO_CONFIG_NO_LEGACY
 /* Do we get callbacks when the ring is completely used, even if we've
@@ -114,4 +114,10 @@
  * This feature indicates that the driver can reset a queue individually.
  */
 #define VIRTIO_F_RING_RESET		40
+
+/*
+ * This feature indicates that the device support administration virtqueues.
+ */
+#define VIRTIO_F_ADMIN_VQ		41
+
 #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
diff --git a/original/uapi/linux/virtio_pci.h b/original/uapi/linux/virtio_pci.h
index 44f4dd2..ef3810d 100644
--- a/original/uapi/linux/virtio_pci.h
+++ b/original/uapi/linux/virtio_pci.h
@@ -175,6 +175,9 @@ struct virtio_pci_modern_common_cfg {
 
 	__le16 queue_notify_data;	/* read-write */
 	__le16 queue_reset;		/* read-write */
+
+	__le16 admin_queue_index;	/* read-only */
+	__le16 admin_queue_num;		/* read-only */
 };
 
 /* Fields in VIRTIO_PCI_CAP_PCI_CFG: */
@@ -215,7 +218,72 @@ struct virtio_pci_cfg_cap {
 #define VIRTIO_PCI_COMMON_Q_USEDHI	52
 #define VIRTIO_PCI_COMMON_Q_NDATA	56
 #define VIRTIO_PCI_COMMON_Q_RESET	58
+#define VIRTIO_PCI_COMMON_ADM_Q_IDX	60
+#define VIRTIO_PCI_COMMON_ADM_Q_NUM	62
 
 #endif /* VIRTIO_PCI_NO_MODERN */
 
+/* Admin command status. */
+#define VIRTIO_ADMIN_STATUS_OK		0
+
+/* Admin command opcode. */
+#define VIRTIO_ADMIN_CMD_LIST_QUERY	0x0
+#define VIRTIO_ADMIN_CMD_LIST_USE	0x1
+
+/* Admin command group type. */
+#define VIRTIO_ADMIN_GROUP_TYPE_SRIOV	0x1
+
+/* Transitional device admin command. */
+#define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE	0x2
+#define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ		0x3
+#define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE		0x4
+#define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ		0x5
+#define VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_INFO		0x6
+
+struct __packed virtio_admin_cmd_hdr {
+	__le16 opcode;
+	/*
+	 * 1 - SR-IOV
+	 * 2-65535 - reserved
+	 */
+	__le16 group_type;
+	/* Unused, reserved for future extensions. */
+	__u8 reserved1[12];
+	__le64 group_member_id;
+};
+
+struct __packed virtio_admin_cmd_status {
+	__le16 status;
+	__le16 status_qualifier;
+	/* Unused, reserved for future extensions. */
+	__u8 reserved2[4];
+};
+
+struct __packed virtio_admin_cmd_legacy_wr_data {
+	__u8 offset; /* Starting offset of the register(s) to write. */
+	__u8 reserved[7];
+	__u8 registers[];
+};
+
+struct __packed virtio_admin_cmd_legacy_rd_data {
+	__u8 offset; /* Starting offset of the register(s) to read. */
+};
+
+#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_END 0
+#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_DEV 0x1
+#define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_MEM 0x2
+
+#define VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO 4
+
+struct __packed virtio_admin_cmd_notify_info_data {
+	__u8 flags; /* 0 = end of list, 1 = owner device, 2 = member device */
+	__u8 bar; /* BAR of the member or the owner device */
+	__u8 padding[6];
+	__le64 offset; /* Offset within bar. */
+};
+
+struct virtio_admin_cmd_notify_info_result {
+	struct virtio_admin_cmd_notify_info_data entries[VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO];
+};
+
 #endif
diff --git a/original/uapi/linux/virtio_pmem.h b/original/uapi/linux/virtio_pmem.h
index d676b36..ede4f35 100644
--- a/original/uapi/linux/virtio_pmem.h
+++ b/original/uapi/linux/virtio_pmem.h
@@ -14,6 +14,13 @@
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
 
+/* Feature bits */
+/* guest physical address range will be indicated as shared memory region 0 */
+#define VIRTIO_PMEM_F_SHMEM_REGION 0
+
+/* shmid of the shared memory region corresponding to the pmem */
+#define VIRTIO_PMEM_SHMEM_REGION_ID 0
+
 struct virtio_pmem_config {
 	__le64 start;
 	__le64 size;
diff --git a/original/uapi/rdma/bnxt_re-abi.h b/original/uapi/rdma/bnxt_re-abi.h
index 6e7c67a..c0c34ac 100644
--- a/original/uapi/rdma/bnxt_re-abi.h
+++ b/original/uapi/rdma/bnxt_re-abi.h
@@ -54,6 +54,8 @@ enum {
 	BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL,
 	BNXT_RE_UCNTX_CMASK_WC_DPI_ENABLED = 0x04ULL,
 	BNXT_RE_UCNTX_CMASK_DBR_PACING_ENABLED = 0x08ULL,
+	BNXT_RE_UCNTX_CMASK_POW2_DISABLED = 0x10ULL,
+	BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED = 0x40,
 };
 
 enum bnxt_re_wqe_mode {
@@ -62,6 +64,14 @@ enum bnxt_re_wqe_mode {
 	BNXT_QPLIB_WQE_MODE_INVALID	= 0x02,
 };
 
+enum {
+	BNXT_RE_COMP_MASK_REQ_UCNTX_POW2_SUPPORT = 0x01,
+};
+
+struct bnxt_re_uctx_req {
+	__aligned_u64 comp_mask;
+};
+
 struct bnxt_re_uctx_resp {
 	__u32 dev_id;
 	__u32 max_qp;
@@ -92,11 +102,16 @@ struct bnxt_re_cq_req {
 	__aligned_u64 cq_handle;
 };
 
+enum bnxt_re_cq_mask {
+	BNXT_RE_CQ_TOGGLE_PAGE_SUPPORT = 0x1,
+};
+
 struct bnxt_re_cq_resp {
 	__u32 cqid;
 	__u32 tail;
 	__u32 phase;
 	__u32 rsvd;
+	__aligned_u64 comp_mask;
 };
 
 struct bnxt_re_resize_cq_req {
@@ -133,6 +148,7 @@ enum bnxt_re_shpg_offt {
 enum bnxt_re_objects {
 	BNXT_RE_OBJECT_ALLOC_PAGE = (1U << UVERBS_ID_NS_SHIFT),
 	BNXT_RE_OBJECT_NOTIFY_DRV,
+	BNXT_RE_OBJECT_GET_TOGGLE_MEM,
 };
 
 enum bnxt_re_alloc_page_type {
@@ -161,4 +177,29 @@ enum bnxt_re_alloc_page_methods {
 enum bnxt_re_notify_drv_methods {
 	BNXT_RE_METHOD_NOTIFY_DRV = (1U << UVERBS_ID_NS_SHIFT),
 };
+
+/* Toggle mem */
+
+enum bnxt_re_get_toggle_mem_type {
+	BNXT_RE_CQ_TOGGLE_MEM = 0,
+	BNXT_RE_SRQ_TOGGLE_MEM,
+};
+
+enum bnxt_re_var_toggle_mem_attrs {
+	BNXT_RE_TOGGLE_MEM_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
+	BNXT_RE_TOGGLE_MEM_TYPE,
+	BNXT_RE_TOGGLE_MEM_RES_ID,
+	BNXT_RE_TOGGLE_MEM_MMAP_PAGE,
+	BNXT_RE_TOGGLE_MEM_MMAP_OFFSET,
+	BNXT_RE_TOGGLE_MEM_MMAP_LENGTH,
+};
+
+enum bnxt_re_toggle_mem_attrs {
+	BNXT_RE_RELEASE_TOGGLE_MEM_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
+};
+
+enum bnxt_re_toggle_mem_methods {
+	BNXT_RE_METHOD_GET_TOGGLE_MEM = (1U << UVERBS_ID_NS_SHIFT),
+	BNXT_RE_METHOD_RELEASE_TOGGLE_MEM,
+};
 #endif /* __BNXT_RE_UVERBS_ABI_H__*/
diff --git a/original/uapi/rdma/efa-abi.h b/original/uapi/rdma/efa-abi.h
index d94c32f..701e2d5 100644
--- a/original/uapi/rdma/efa-abi.h
+++ b/original/uapi/rdma/efa-abi.h
@@ -1,12 +1,13 @@
 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
 /*
- * Copyright 2018-2023 Amazon.com, Inc. or its affiliates. All rights reserved.
+ * Copyright 2018-2024 Amazon.com, Inc. or its affiliates. All rights reserved.
  */
 
 #ifndef EFA_ABI_USER_H
 #define EFA_ABI_USER_H
 
 #include <linux/types.h>
+#include <rdma/ib_user_ioctl_cmds.h>
 
 /*
  * Increment this value if any changes that break userspace ABI
@@ -134,4 +135,22 @@ struct efa_ibv_ex_query_device_resp {
 	__u32 device_caps;
 };
 
+enum {
+	EFA_QUERY_MR_VALIDITY_RECV_IC_ID = 1 << 0,
+	EFA_QUERY_MR_VALIDITY_RDMA_READ_IC_ID = 1 << 1,
+	EFA_QUERY_MR_VALIDITY_RDMA_RECV_IC_ID = 1 << 2,
+};
+
+enum efa_query_mr_attrs {
+	EFA_IB_ATTR_QUERY_MR_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
+	EFA_IB_ATTR_QUERY_MR_RESP_IC_ID_VALIDITY,
+	EFA_IB_ATTR_QUERY_MR_RESP_RECV_IC_ID,
+	EFA_IB_ATTR_QUERY_MR_RESP_RDMA_READ_IC_ID,
+	EFA_IB_ATTR_QUERY_MR_RESP_RDMA_RECV_IC_ID,
+};
+
+enum efa_mr_methods {
+	EFA_IB_METHOD_MR_QUERY = (1U << UVERBS_ID_NS_SHIFT),
+};
+
 #endif /* EFA_ABI_USER_H */
diff --git a/original/uapi/rdma/hns-abi.h b/original/uapi/rdma/hns-abi.h
index ce0f37f..c996e15 100644
--- a/original/uapi/rdma/hns-abi.h
+++ b/original/uapi/rdma/hns-abi.h
@@ -125,4 +125,9 @@ struct hns_roce_ib_alloc_pd_resp {
 	__u32 pdn;
 };
 
+struct hns_roce_ib_create_ah_resp {
+	__u8 dmac[6];
+	__u8 reserved[2];
+};
+
 #endif /* HNS_ABI_USER_H */
diff --git a/original/uapi/rdma/mlx5-abi.h b/original/uapi/rdma/mlx5-abi.h
index a96b7d2..d4f6a36 100644
--- a/original/uapi/rdma/mlx5-abi.h
+++ b/original/uapi/rdma/mlx5-abi.h
@@ -37,6 +37,7 @@
 #include <linux/types.h>
 #include <linux/if_ether.h>	/* For ETH_ALEN. */
 #include <rdma/ib_user_ioctl_verbs.h>
+#include <rdma/mlx5_user_ioctl_verbs.h>
 
 enum {
 	MLX5_QP_FLAG_SIGNATURE		= 1 << 0,
@@ -275,6 +276,7 @@ struct mlx5_ib_query_device_resp {
 	__u32	tunnel_offloads_caps; /* enum mlx5_ib_tunnel_offloads */
 	struct  mlx5_ib_dci_streams_caps dci_streams_caps;
 	__u16 reserved;
+	struct mlx5_ib_uapi_reg reg_c0;
 };
 
 enum mlx5_ib_create_cq_flags {
diff --git a/original/uapi/rdma/mlx5_user_ioctl_verbs.h b/original/uapi/rdma/mlx5_user_ioctl_verbs.h
index 7af9e09..3189c7f 100644
--- a/original/uapi/rdma/mlx5_user_ioctl_verbs.h
+++ b/original/uapi/rdma/mlx5_user_ioctl_verbs.h
@@ -64,6 +64,7 @@ enum mlx5_ib_uapi_dm_type {
 	MLX5_IB_UAPI_DM_TYPE_STEERING_SW_ICM,
 	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_SW_ICM,
 	MLX5_IB_UAPI_DM_TYPE_HEADER_MODIFY_PATTERN_SW_ICM,
+	MLX5_IB_UAPI_DM_TYPE_ENCAP_SW_ICM,
 };
 
 enum mlx5_ib_uapi_devx_create_event_channel_flags {
diff --git a/original/uapi/regulator/regulator.h b/original/uapi/regulator/regulator.h
new file mode 100644
index 0000000..71bf71a
--- /dev/null
+++ b/original/uapi/regulator/regulator.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Regulator uapi header
+ *
+ * Author: Naresh Solanki <Naresh.Solanki@9elements.com>
+ */
+
+#ifndef _UAPI_REGULATOR_H
+#define _UAPI_REGULATOR_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
+ *                Data passed is old voltage cast to (void *).
+ * DISABLE        Regulator was disabled.
+ * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
+ *                      Data passed is "struct pre_voltage_change_data"
+ * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
+ *                      Data passed is old voltage cast to (void *).
+ * PRE_DISABLE    Regulator is about to be disabled
+ * ABORT_DISABLE  Regulator disable failed for some reason
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE			0x80
+#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
+#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
+#define REGULATOR_EVENT_PRE_DISABLE		0x400
+#define REGULATOR_EVENT_ABORT_DISABLE		0x800
+#define REGULATOR_EVENT_ENABLE			0x1000
+/*
+ * Following notifications should be emitted only if detected condition
+ * is such that the HW is likely to still be working but consumers should
+ * take a recovery action to prevent problems escalating into errors.
+ */
+#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN	0x2000
+#define REGULATOR_EVENT_OVER_CURRENT_WARN	0x4000
+#define REGULATOR_EVENT_OVER_VOLTAGE_WARN	0x8000
+#define REGULATOR_EVENT_OVER_TEMP_WARN		0x10000
+#define REGULATOR_EVENT_WARN_MASK		0x1E000
+
+struct reg_genl_event {
+	char reg_name[32];
+	uint64_t event;
+};
+
+/* attributes of reg_genl_family */
+enum {
+	REG_GENL_ATTR_UNSPEC,
+	REG_GENL_ATTR_EVENT,	/* reg event info needed by user space */
+	__REG_GENL_ATTR_MAX,
+};
+
+#define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1)
+
+/* commands supported by the reg_genl_family */
+enum {
+	REG_GENL_CMD_UNSPEC,
+	REG_GENL_CMD_EVENT,	/* kernel->user notifications for reg events */
+	__REG_GENL_CMD_MAX,
+};
+
+#define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1)
+
+#define REG_GENL_FAMILY_NAME		"reg_event"
+#define REG_GENL_VERSION		0x01
+#define REG_GENL_MCAST_GROUP_NAME	"reg_mc_group"
+
+#endif /* _UAPI_REGULATOR_H */
diff --git a/original/uapi/scsi/scsi_bsg_mpi3mr.h b/original/uapi/scsi/scsi_bsg_mpi3mr.h
index 907d345..c72ce38 100644
--- a/original/uapi/scsi/scsi_bsg_mpi3mr.h
+++ b/original/uapi/scsi/scsi_bsg_mpi3mr.h
@@ -491,6 +491,8 @@ struct mpi3_nvme_encapsulated_error_reply {
 #define MPI3MR_NVME_DATA_FORMAT_PRP	0
 #define MPI3MR_NVME_DATA_FORMAT_SGL1	1
 #define MPI3MR_NVME_DATA_FORMAT_SGL2	2
+#define MPI3MR_NVMESGL_DATA_SEGMENT	0x00
+#define MPI3MR_NVMESGL_LAST_SEGMENT	0x03
 
 /* MPI3: task management related definitions */
 struct mpi3_scsi_task_mgmt_request {
diff --git a/original/uapi/sound/asound.h b/original/uapi/sound/asound.h
index f9939da..628d46a 100644
--- a/original/uapi/sound/asound.h
+++ b/original/uapi/sound/asound.h
@@ -142,7 +142,7 @@ struct snd_hwdep_dsp_image {
  *                                                                           *
  *****************************************************************************/
 
-#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 15)
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 17)
 
 typedef unsigned long snd_pcm_uframes_t;
 typedef signed long snd_pcm_sframes_t;
@@ -267,7 +267,10 @@ typedef int __bitwise snd_pcm_format_t;
 
 typedef int __bitwise snd_pcm_subformat_t;
 #define	SNDRV_PCM_SUBFORMAT_STD		((__force snd_pcm_subformat_t) 0)
-#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_STD
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_MAX	((__force snd_pcm_subformat_t) 1)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_20	((__force snd_pcm_subformat_t) 2)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_24	((__force snd_pcm_subformat_t) 3)
+#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_MSBITS_24
 
 #define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
 #define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
@@ -413,7 +416,7 @@ struct snd_pcm_hw_params {
 	unsigned int rmask;		/* W: requested masks */
 	unsigned int cmask;		/* R: changed masks */
 	unsigned int info;		/* R: Info flags for returned setup */
-	unsigned int msbits;		/* R: used most significant bits */
+	unsigned int msbits;		/* R: used most significant bits (in sample bit-width) */
 	unsigned int rate_num;		/* R: rate numerator */
 	unsigned int rate_den;		/* R: rate denominator */
 	snd_pcm_uframes_t fifo_size;	/* R: chip FIFO size in frames */
diff --git a/original/uapi/sound/scarlett2.h b/original/uapi/sound/scarlett2.h
new file mode 100644
index 0000000..91467ab
--- /dev/null
+++ b/original/uapi/sound/scarlett2.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ *   Focusrite Scarlett 2 Protocol Driver for ALSA
+ *   (including Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett USB, and
+ *   Clarett+ series products)
+ *
+ *   Copyright (c) 2023 by Geoffrey D. Bennett <g at b4.vu>
+ */
+#ifndef __UAPI_SOUND_SCARLETT2_H
+#define __UAPI_SOUND_SCARLETT2_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define SCARLETT2_HWDEP_MAJOR 1
+#define SCARLETT2_HWDEP_MINOR 0
+#define SCARLETT2_HWDEP_SUBMINOR 0
+
+#define SCARLETT2_HWDEP_VERSION \
+	((SCARLETT2_HWDEP_MAJOR << 16) | \
+	 (SCARLETT2_HWDEP_MINOR << 8) | \
+	  SCARLETT2_HWDEP_SUBMINOR)
+
+#define SCARLETT2_HWDEP_VERSION_MAJOR(v) (((v) >> 16) & 0xFF)
+#define SCARLETT2_HWDEP_VERSION_MINOR(v) (((v) >> 8) & 0xFF)
+#define SCARLETT2_HWDEP_VERSION_SUBMINOR(v) ((v) & 0xFF)
+
+/* Get protocol version */
+#define SCARLETT2_IOCTL_PVERSION _IOR('S', 0x60, int)
+
+/* Reboot */
+#define SCARLETT2_IOCTL_REBOOT _IO('S', 0x61)
+
+/* Select flash segment */
+#define SCARLETT2_SEGMENT_ID_SETTINGS 0
+#define SCARLETT2_SEGMENT_ID_FIRMWARE 1
+#define SCARLETT2_SEGMENT_ID_COUNT 2
+
+#define SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT _IOW('S', 0x62, int)
+
+/* Erase selected flash segment */
+#define SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT _IO('S', 0x63)
+
+/* Get selected flash segment erase progress
+ * 1 through to num_blocks, or 255 for complete
+ */
+struct scarlett2_flash_segment_erase_progress {
+	unsigned char progress;
+	unsigned char num_blocks;
+};
+#define SCARLETT2_IOCTL_GET_ERASE_PROGRESS \
+	_IOR('S', 0x64, struct scarlett2_flash_segment_erase_progress)
+
+#endif /* __UAPI_SOUND_SCARLETT2_H */
diff --git a/original/uapi/sound/sof/tokens.h b/original/uapi/sound/sof/tokens.h
index 453cab2..ee57089 100644
--- a/original/uapi/sound/sof/tokens.h
+++ b/original/uapi/sound/sof/tokens.h
@@ -35,6 +35,7 @@
 /* buffers */
 #define SOF_TKN_BUF_SIZE			100
 #define SOF_TKN_BUF_CAPS			101
+#define SOF_TKN_BUF_FLAGS			102
 
 /* DAI */
 /* Token retired with ABI 3.2, do not use for new capabilities
@@ -213,4 +214,8 @@
 #define SOF_TKN_AMD_ACPI2S_CH			1701
 #define SOF_TKN_AMD_ACPI2S_TDM_MODE		1702
 
+/* MICFIL PDM */
+#define SOF_TKN_IMX_MICFIL_RATE			2000
+#define SOF_TKN_IMX_MICFIL_CH			2001
+
 #endif
diff --git a/original/uapi/xen/gntalloc.h b/original/uapi/xen/gntalloc.h
index 48d2790..3109282 100644
--- a/original/uapi/xen/gntalloc.h
+++ b/original/uapi/xen/gntalloc.h
@@ -31,7 +31,10 @@ struct ioctl_gntalloc_alloc_gref {
 	__u64 index;
 	/* The grant references of the newly created grant, one per page */
 	/* Variable size, depending on count */
-	__u32 gref_ids[1];
+	union {
+		__u32 gref_ids[1];
+		__DECLARE_FLEX_ARRAY(__u32, gref_ids_flex);
+	};
 };
 
 #define GNTALLOC_FLAG_WRITABLE 1