diff options
Diffstat (limited to 'original/uapi/linux/vfio.h')
| -rw-r--r-- | original/uapi/linux/vfio.h | 150 |
1 files changed, 149 insertions, 1 deletions
diff --git a/original/uapi/linux/vfio.h b/original/uapi/linux/vfio.h index 20c804b..afc1369 100644 --- a/original/uapi/linux/vfio.h +++ b/original/uapi/linux/vfio.h @@ -217,6 +217,7 @@ struct vfio_device_info { __u32 num_regions; /* Max region index + 1 */ __u32 num_irqs; /* Max IRQ index + 1 */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) @@ -677,11 +678,60 @@ enum { * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12, * struct vfio_pci_hot_reset_info) * + * This command is used to query the affected devices in the hot reset for + * a given device. + * + * This command always reports the segment, bus, and devfn information for + * each affected device, and selectively reports the group_id or devid per + * the way how the calling device is opened. + * + * - If the calling device is opened via the traditional group/container + * API, group_id is reported. User should check if it has owned all + * the affected devices and provides a set of group fds to prove the + * ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl. + * + * - If the calling device is opened as a cdev, devid is reported. + * Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this + * data type. All the affected devices should be represented in + * the dev_set, ex. bound to a vfio driver, and also be owned by + * this interface which is determined by the following conditions: + * 1) Has a valid devid within the iommufd_ctx of the calling device. + * Ownership cannot be determined across separate iommufd_ctx and + * the cdev calling conventions do not support a proof-of-ownership + * model as provided in the legacy group interface. In this case + * valid devid with value greater than zero is provided in the return + * structure. + * 2) Does not have a valid devid within the iommufd_ctx of the calling + * device, but belongs to the same IOMMU group as the calling device + * or another opened device that has a valid devid within the + * iommufd_ctx of the calling device. This provides implicit ownership + * for devices within the same DMA isolation context. In this case + * the devid value of VFIO_PCI_DEVID_OWNED is provided in the return + * structure. + * + * A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return + * structure for affected devices where device is NOT represented in the + * dev_set or ownership is not available. Such devices prevent the use + * of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership + * calling conventions (ie. via legacy group accessed devices). Flag + * VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the + * affected devices are represented in the dev_set and also owned by + * the user. This flag is available only when + * flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved. + * When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero + * length fd array on the calling device as the ownership is validated + * by iommufd_ctx. + * * Return: 0 on success, -errno on failure: * -enospc = insufficient buffer, -enodev = unsupported for device. */ struct vfio_pci_dependent_device { - __u32 group_id; + union { + __u32 group_id; + __u32 devid; +#define VFIO_PCI_DEVID_OWNED 0 +#define VFIO_PCI_DEVID_NOT_OWNED -1 + }; __u16 segment; __u8 bus; __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ @@ -690,6 +740,8 @@ struct vfio_pci_dependent_device { struct vfio_pci_hot_reset_info { __u32 argsz; __u32 flags; +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID (1 << 0) +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED (1 << 1) __u32 count; struct vfio_pci_dependent_device devices[]; }; @@ -700,6 +752,24 @@ struct vfio_pci_hot_reset_info { * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, * struct vfio_pci_hot_reset) * + * A PCI hot reset results in either a bus or slot reset which may affect + * other devices sharing the bus/slot. The calling user must have + * ownership of the full set of affected devices as determined by the + * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl. + * + * When called on a device file descriptor acquired through the vfio + * group interface, the user is required to provide proof of ownership + * of those affected devices via the group_fds array in struct + * vfio_pci_hot_reset. + * + * When called on a direct cdev opened vfio device, the flags field of + * struct vfio_pci_hot_reset_info reports the ownership status of the + * affected devices and this ioctl must be called with an empty group_fds + * array. See above INFO ioctl definition for ownership requirements. + * + * Mixed usage of legacy groups and cdevs across the set of affected + * devices is not supported. + * * Return: 0 on success, -errno on failure. */ struct vfio_pci_hot_reset { @@ -829,6 +899,83 @@ struct vfio_device_feature { #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17) /* + * VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18, + * struct vfio_device_bind_iommufd) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @iommufd: iommufd to bind. + * @out_devid: The device id generated by this bind. devid is a handle for + * this device/iommufd bond and can be used in IOMMUFD commands. + * + * Bind a vfio_device to the specified iommufd. + * + * User is restricted from accessing the device before the binding operation + * is completed. Only allowed on cdev fds. + * + * Unbind is automatically conducted when device fd is closed. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_bind_iommufd { + __u32 argsz; + __u32 flags; + __s32 iommufd; + __u32 out_devid; +}; + +#define VFIO_DEVICE_BIND_IOMMUFD _IO(VFIO_TYPE, VFIO_BASE + 18) + +/* + * VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19, + * struct vfio_device_attach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * @pt_id: Input the target id which can represent an ioas or a hwpt + * allocated via iommufd subsystem. + * Output the input ioas id or the attached hwpt id which could + * be the specified hwpt itself or a hwpt automatically created + * for the specified ioas by kernel during the attachment. + * + * Associate the device with an address space within the bound iommufd. + * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. This is only + * allowed on cdev fds. + * + * If a vfio device is currently attached to a valid hw_pagetable, without doing + * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl + * passing in another hw_pagetable (hwpt) id is allowed. This action, also known + * as a hw_pagetable replacement, will replace the device's currently attached + * hw_pagetable with a new hw_pagetable corresponding to the given pt_id. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_attach_iommufd_pt { + __u32 argsz; + __u32 flags; + __u32 pt_id; +}; + +#define VFIO_DEVICE_ATTACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 19) + +/* + * VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20, + * struct vfio_device_detach_iommufd_pt) + * @argsz: User filled size of this data. + * @flags: Must be 0. + * + * Remove the association of the device and its current associated address + * space. After it, the device should be in a blocking DMA state. This is only + * allowed on cdev fds. + * + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_detach_iommufd_pt { + __u32 argsz; + __u32 flags; +}; + +#define VFIO_DEVICE_DETACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 20) + +/* * Provide support for setting a PCI VF Token, which is used as a shared * secret between PF and VF drivers. This feature may only be set on a * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing @@ -1304,6 +1451,7 @@ struct vfio_iommu_type1_info { #define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */ __u64 iova_pgsizes; /* Bitmap of supported page sizes */ __u32 cap_offset; /* Offset within info struct of first cap */ + __u32 pad; }; /* |