diff options
Diffstat (limited to 'original/uapi/linux/videodev2.h')
| -rw-r--r-- | original/uapi/linux/videodev2.h | 125 |
1 files changed, 94 insertions, 31 deletions
diff --git a/original/uapi/linux/videodev2.h b/original/uapi/linux/videodev2.h index 94f123f..45184a2 100644 --- a/original/uapi/linux/videodev2.h +++ b/original/uapi/linux/videodev2.h @@ -335,6 +335,19 @@ enum v4l2_ycbcr_encoding { }; /* + * enum v4l2_hsv_encoding values should not collide with the ones from + * enum v4l2_ycbcr_encoding. + */ +enum v4l2_hsv_encoding { + + /* Hue mapped to 0 - 179 */ + V4L2_HSV_ENC_180 = 128, + + /* Hue mapped to 0-255 */ + V4L2_HSV_ENC_256 = 129, +}; + +/* * Determine how YCBCR_ENC_DEFAULT should map to a proper Y'CbCr encoding. * This depends on the colorspace. */ @@ -349,8 +362,8 @@ enum v4l2_quantization { /* * The default for R'G'B' quantization is always full range, except * for the BT2020 colorspace. For Y'CbCr the quantization is always - * limited range, except for COLORSPACE_JPEG, SRGB, ADOBERGB, - * XV601 or XV709: those are full range. + * limited range, except for COLORSPACE_JPEG, XV601 or XV709: those + * are full range. */ V4L2_QUANTIZATION_DEFAULT = 0, V4L2_QUANTIZATION_FULL_RANGE = 1, @@ -362,11 +375,11 @@ enum v4l2_quantization { * This depends on whether the image is RGB or not, the colorspace and the * Y'CbCr encoding. */ -#define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb, colsp, ycbcr_enc) \ - (((is_rgb) && (colsp) == V4L2_COLORSPACE_BT2020) ? V4L2_QUANTIZATION_LIM_RANGE : \ - (((is_rgb) || (ycbcr_enc) == V4L2_YCBCR_ENC_XV601 || \ - (ycbcr_enc) == V4L2_YCBCR_ENC_XV709 || (colsp) == V4L2_COLORSPACE_JPEG) || \ - (colsp) == V4L2_COLORSPACE_ADOBERGB || (colsp) == V4L2_COLORSPACE_SRGB ? \ +#define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb_or_hsv, colsp, ycbcr_enc) \ + (((is_rgb_or_hsv) && (colsp) == V4L2_COLORSPACE_BT2020) ? \ + V4L2_QUANTIZATION_LIM_RANGE : \ + (((is_rgb_or_hsv) || (ycbcr_enc) == V4L2_YCBCR_ENC_XV601 || \ + (ycbcr_enc) == V4L2_YCBCR_ENC_XV709 || (colsp) == V4L2_COLORSPACE_JPEG) ? \ V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE)) enum v4l2_priority { @@ -462,7 +475,12 @@ struct v4l2_pix_format { __u32 colorspace; /* enum v4l2_colorspace */ __u32 priv; /* private data, depends on pixelformat */ __u32 flags; /* format flags (V4L2_PIX_FMT_FLAG_*) */ - __u32 ycbcr_enc; /* enum v4l2_ycbcr_encoding */ + union { + /* enum v4l2_ycbcr_encoding */ + __u32 ycbcr_enc; + /* enum v4l2_hsv_encoding */ + __u32 hsv_enc; + }; __u32 quantization; /* enum v4l2_quantization */ __u32 xfer_func; /* enum v4l2_xfer_func */ }; @@ -586,6 +604,13 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SGBRG16 v4l2_fourcc('G', 'B', '1', '6') /* 16 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG16 v4l2_fourcc('G', 'R', '1', '6') /* 16 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SRGGB16 v4l2_fourcc('R', 'G', '1', '6') /* 16 RGRG.. GBGB.. */ + +/* HSV formats */ +#define V4L2_PIX_FMT_HSV24 v4l2_fourcc('H', 'S', 'V', '3') +#define V4L2_PIX_FMT_HSV32 v4l2_fourcc('H', 'S', 'V', '4') /* compressed formats */ #define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ @@ -603,6 +628,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ @@ -634,6 +660,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y8I v4l2_fourcc('Y', '8', 'I', ' ') /* Greyscale 8-bit L/R interleaved */ #define V4L2_PIX_FMT_Y12I v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */ #define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */ +#define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */ /* SDR formats - used only for Software Defined Radio devices */ #define V4L2_SDR_FMT_CU8 v4l2_fourcc('C', 'U', '0', '8') /* IQ u8 */ @@ -1229,6 +1256,9 @@ struct v4l2_standard { * (aka field 2) of interlaced field formats * @standards: Standards the timing belongs to * @flags: Flags + * @picture_aspect: The picture aspect ratio (hor/vert). + * @cea861_vic: VIC code as per the CEA-861 standard. + * @hdmi_vic: VIC code as per the HDMI standard. * @reserved: Reserved fields, must be zeroed. * * A note regarding vertical interlaced timings: height refers to the total @@ -1258,7 +1288,10 @@ struct v4l2_bt_timings { __u32 il_vbackporch; __u32 standards; __u32 flags; - __u32 reserved[14]; + struct v4l2_fract picture_aspect; + __u8 cea861_vic; + __u8 hdmi_vic; + __u8 reserved[46]; } __attribute__ ((packed)); /* Interlaced or progressive format */ @@ -1278,39 +1311,66 @@ struct v4l2_bt_timings { /* Flags */ -/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary - GTF' curve (GTF). In both cases the horizontal and/or vertical blanking - intervals are reduced, allowing a higher resolution over the same - bandwidth. This is a read-only flag. */ +/* + * CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary + * GTF' curve (GTF). In both cases the horizontal and/or vertical blanking + * intervals are reduced, allowing a higher resolution over the same + * bandwidth. This is a read-only flag. + */ #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) -/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple - of six. These formats can be optionally played at 1 / 1.001 speed. - This is a read-only flag. */ +/* + * CEA-861 specific: set for CEA-861 formats with a framerate of a multiple + * of six. These formats can be optionally played at 1 / 1.001 speed. + * This is a read-only flag. + */ #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) -/* CEA-861 specific: only valid for video transmitters, the flag is cleared - by receivers. - If the framerate of the format is a multiple of six, then the pixelclock - used to set up the transmitter is divided by 1.001 to make it compatible - with 60 Hz based standards such as NTSC and PAL-M that use a framerate of - 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate - such frequencies, then the flag will also be cleared. */ +/* + * CEA-861 specific: only valid for video transmitters, the flag is cleared + * by receivers. + * If the framerate of the format is a multiple of six, then the pixelclock + * used to set up the transmitter is divided by 1.001 to make it compatible + * with 60 Hz based standards such as NTSC and PAL-M that use a framerate of + * 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate + * such frequencies, then the flag will also be cleared. + */ #define V4L2_DV_FL_REDUCED_FPS (1 << 2) -/* Specific to interlaced formats: if set, then field 1 is really one half-line - longer and field 2 is really one half-line shorter, so each field has - exactly the same number of half-lines. Whether half-lines can be detected - or used depends on the hardware. */ +/* + * Specific to interlaced formats: if set, then field 1 is really one half-line + * longer and field 2 is really one half-line shorter, so each field has + * exactly the same number of half-lines. Whether half-lines can be detected + * or used depends on the hardware. + */ #define V4L2_DV_FL_HALF_LINE (1 << 3) -/* If set, then this is a Consumer Electronics (CE) video format. Such formats +/* + * If set, then this is a Consumer Electronics (CE) video format. Such formats * differ from other formats (commonly called IT formats) in that if RGB * encoding is used then by default the RGB values use limited range (i.e. * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861 - * except for the 640x480 format are CE formats. */ + * except for the 640x480 format are CE formats. + */ #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4) /* Some formats like SMPTE-125M have an interlaced signal with a odd * total height. For these formats, if this flag is set, the first * field has the extra line. If not, it is the second field. */ -#define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE (1 << 5) +#define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE (1 << 5) +/* + * If set, then the picture_aspect field is valid. Otherwise assume that the + * pixels are square, so the picture aspect ratio is the same as the width to + * height ratio. + */ +#define V4L2_DV_FL_HAS_PICTURE_ASPECT (1 << 6) +/* + * If set, then the cea861_vic field is valid and contains the Video + * Identification Code as per the CEA-861 standard. + */ +#define V4L2_DV_FL_HAS_CEA861_VIC (1 << 7) +/* + * If set, then the hdmi_vic field is valid and contains the Video + * Identification Code as per the HDMI standard (HDMI Vendor Specific + * InfoFrame). + */ +#define V4L2_DV_FL_HAS_HDMI_VIC (1 << 8) /* A few useful defines to calculate the total blanking and frame sizes */ #define V4L2_DV_BT_BLANKING_WIDTH(bt) \ @@ -2006,7 +2066,10 @@ struct v4l2_pix_format_mplane { struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES]; __u8 num_planes; __u8 flags; - __u8 ycbcr_enc; + union { + __u8 ycbcr_enc; + __u8 hsv_enc; + }; __u8 quantization; __u8 xfer_func; __u8 reserved[7]; |