diff options
Diffstat (limited to 'configure.ac')
| -rw-r--r-- | configure.ac | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/configure.ac b/configure.ac deleted file mode 100644 index b0bb452..0000000 --- a/configure.ac +++ /dev/null @@ -1,275 +0,0 @@ -# Copyright © 2013 Intel Corporation -# -# Permission is hereby granted, free of charge, to any person obtaining a -# copy of this software and associated documentation files (the "Software"), -# to deal in the Software without restriction, including without limitation -# the rights to use, copy, modify, merge, publish, distribute, sublicense, -# and/or sell copies of the Software, and to permit persons to whom the -# Software is furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice (including the next -# paragraph) shall be included in all copies or substantial portions of the -# Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS -# IN THE SOFTWARE. - -# Initialize Autoconf -AC_PREREQ([2.60]) -AC_INIT([libepoxy], - [1.5.4], - [https://github.com/anholt/libepoxy], - [libepoxy]) -AC_CONFIG_SRCDIR([Makefile.am]) -AC_CONFIG_HEADERS([config.h]) -AC_CONFIG_MACRO_DIR([m4]) - -# Initialize Automake -AM_INIT_AUTOMAKE([foreign -Wno-portability dist-xz no-dist-gzip tar-ustar subdir-objects]) - -# Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS -m4_ifndef([XORG_MACROS_VERSION], - [m4_fatal([must install xorg-macros 1.8 or later before running autoconf/autogen. - Hint: either install from source, git://anongit.freedesktop.org/xorg/util/macros or, - depending on you distribution, try package 'xutils-dev' or 'xorg-x11-util-macros'])]) - -XORG_MACROS_VERSION(1.8) -XORG_DEFAULT_OPTIONS - -AC_CHECK_PROGS([PYTHON], [python3 python2 python]) - -# Initialize libtool -AC_DISABLE_STATIC -AC_LIBTOOL_WIN32_DLL -AC_PROG_LIBTOOL -AC_SYS_LARGEFILE - -AC_CHECK_HEADER([KHR/khrplatform.h], - [AC_DEFINE([HAVE_KHRPLATFORM_H], [1], - [Define to 1 if you have <KHR/khrplatform.h> (used for tests)] - )] - ) - -# OS X defaults to having -Wint-conversion ("warn when passing -# uintptr_t to a void *") by default. Kill that. -XORG_TESTSET_CFLAG(CWARNFLAGS, [-Wno-int-conversion]) - -AC_ARG_ENABLE([x11], - [AC_HELP_STRING([--enable-x11=@<:@yes,no@:>@], [Enable X11 support @<:@default=yes@:>@])], - [enable_x11=$enableval], - [enable_x11=yes]) - -AC_ARG_ENABLE([glx], - [AC_HELP_STRING([--enable-glx=@<:@auto,yes,no@:>@], [Enable GLX support @<:@default=auto@:>@])], - [enable_glx=$enableval], - [enable_glx=auto]) - -# GLX can be used on different platforms, so we expose a -# configure time switch to enable or disable it; in case -# the "auto" default value is set, we only enable GLX -# support on Linux and Unix -AS_CASE([$enable_glx], - [auto], [ - AS_CASE([$host_os], - [mingw*], [build_glx=no], - [darwin*], [build_glx=no], - [android*], [build_glx=no], - [build_glx=yes]) - ], - - [yes], [ - build_glx=yes - ], - - [no], [ - build_glx=no - ], - - [AC_MSG_ERROR([Invalid value "$enable_glx" for option "--enable-glx"])] -]) - -AC_ARG_ENABLE([egl], - [AC_HELP_STRING([--enable-egl=@<:@auto,yes,no@:>@], [Enable EGL support @<:@default=auto@:>@])], - [enable_egl=$enableval], - [enable_egl=auto]) - -AS_CASE([$enable_egl], - [auto], [ - AS_CASE([$host_os], - [mingw*], [build_egl=no], - [darwin*], [build_egl=no], - [build_egl=yes]) - ], - - [yes], [ - build_egl=yes - ], - - [no], [ - build_egl=no - ], - - [AC_MSG_ERROR([Invalid value "$enable_egl" for option "--enable-egl"])] -]) - -# The remaining platform specific API are enabled depending on the -# platform we're building for -AS_CASE([$host_os], - [mingw*], [ - build_wgl=yes - has_znow=yes - # On windows, the DLL has to have all of its functions - # resolved at link time, so we have to link directly against - # opengl32.dll. But that's the only GL provider, anyway. - EPOXY_LINK_LIBS="-lopengl32" - - # Testing our built windows binaries requires that they be run - # under wine. Yeah, we should be nice and autodetect, but - # there's lots of missing autodetection for the testsuite - # (like checking for EGL and GLX libs in non-windows.). - AC_SUBST([LOG_COMPILER], [wine]) - ], - - [darwin*], [ - build_wgl=no - has_znow=no - EPOXY_LINK_LIBS="" - ], - - [ - build_wgl=no - has_znow=yes - # On platforms with dlopen, we load everything dynamically and - # don't link against a specific window system or GL implementation. - EPOXY_LINK_LIBS="" - ] -) - -AC_SUBST(EPOXY_LINK_LIBS) - -if test x$enable_x11 = xno; then - if test x$enable_glx = xyes; then - AC_MSG_ERROR([GLX support is explicitly enabled, but X11 was disabled]) - fi - build_glx=no -else - AC_DEFINE([ENABLE_X11], [1], [Whether X11 support is enabled]) -fi - -AM_CONDITIONAL(BUILD_EGL, test x$build_egl = xyes) -if test x$build_egl = xyes; then - PKG_CHECK_MODULES(EGL, [egl]) - AC_DEFINE([BUILD_EGL], [1], [build EGL tests]) - AC_DEFINE(ENABLE_EGL, [1], [Whether EGL support is enabled]) -fi - -AM_CONDITIONAL(BUILD_GLX, test x$build_glx = xyes) -if test x$build_glx = xyes; then - AC_DEFINE([BUILD_GLX], [1], [build GLX tests]) -fi - -AM_CONDITIONAL(BUILD_WGL, test x$build_wgl = xyes) -if test x$build_wgl = xyes; then - AC_DEFINE([BUILD_WGL], [1], [build WGL tests]) -fi - -AM_CONDITIONAL(HAS_ZNOW, test x$has_znow = xyes) - -AC_CHECK_LIB([GLESv1_CM], [glFlush], [has_gles1=yes], [has_gles1=no]) -AM_CONDITIONAL(HAS_GLES1, test x$has_gles1 = xyes) - -AC_CHECK_LIB([dl], [dlopen], [DLOPEN_LIBS="-ldl"]) -AC_SUBST([DLOPEN_LIBS]) - -savelibs=$LIBS -LIBS=$DLOPEN_LIBS -AC_CHECK_FUNCS([dlvsym], [have_dlvsym=1], [have_dlvsym=0]) -AM_CONDITIONAL(HAVE_DLVSYM, test $have_dlvsym = 1) -LIBS=$savelibs - -VISIBILITY_CFLAGS="" -AS_CASE(["$host"], - - [*-*-mingw*], [ - dnl on mingw32 we do -fvisibility=hidden and __declspec(dllexport) - AC_DEFINE([EPOXY_PUBLIC], - [__attribute__((visibility("default"))) __declspec(dllexport) extern], - [defines how to decorate public symbols while building]) - VISIBILITY_CFLAGS="-fvisibility=hidden" - ], - - [ - dnl on other compilers, check if we can do -fvisibility=hidden - SAVED_CFLAGS="${CFLAGS}" - CFLAGS="-fvisibility=hidden" - AC_MSG_CHECKING([for -fvisibility=hidden compiler flag]) - AC_TRY_COMPILE([], [int main (void) { return 0; }], [ - AC_MSG_RESULT(yes) - enable_fvisibility_hidden=yes - ], [ - AC_MSG_RESULT(no) - enable_fvisibility_hidden=no - ]) - CFLAGS="${SAVED_CFLAGS}" - - AS_IF([test "${enable_fvisibility_hidden}" = "yes"], [ - AC_DEFINE([EPOXY_PUBLIC], - [__attribute__((visibility("default"))) extern], - [defines how to decorate public symbols while building]) - VISIBILITY_CFLAGS="-fvisibility=hidden" - ]) - ] -) - -AC_SUBST([VISIBILITY_CFLAGS]) - -if test x$enable_x11 = xyes; then - PKG_CHECK_MODULES(X11, [x11], [x11=yes], [x11=no]) - if test x$x11 = xno -a x$build_glx = xyes; then - AC_MSG_ERROR([libX11 headers (libx11-dev) are required to build with GLX support]) - fi -else - x11=no -fi - -if test x$build_glx = xyes; then - AC_DEFINE(ENABLE_GLX, [1], [Whether GLX support is enabled]) -fi - -AM_CONDITIONAL(HAVE_X11, test x$x11 = xyes) - -PKG_CHECK_MODULES(GL, [gl], [gl=yes], [gl=no]) -PKG_CHECK_MODULES(EGL, [egl], [egl=yes], [egl=no]) - -GL_REQS="" -AS_IF([test x$gl = xyes], [GL_REQS="$GL_REQS gl"]) -AS_IF([test x$build_egl = xyes && test x$egl = xyes], [GL_REQS="$GL_REQS egl"]) -AC_SUBST(GL_REQS) - -# Variables for the pkg-config file; AC_SUBST does not do `test` substitutions, -# so we need to specify the boolean values here -AS_IF([test x$build_glx = xyes], [epoxy_has_glx=1], [epoxy_has_glx=0]) -AS_IF([test x$build_egl = xyes], [epoxy_has_egl=1], [epoxy_has_egl=0]) -AS_IF([test x$build_wgl = xyes], [epoxy_has_wgl=1], [epoxy_has_wgl=0]) -AC_SUBST(epoxy_has_glx) -AC_SUBST(epoxy_has_egl) -AC_SUBST(epoxy_has_wgl) - -AC_CONFIG_FILES([ - epoxy.pc - Makefile - include/epoxy/Makefile - src/Makefile - test/Makefile -]) -AC_OUTPUT - -echo " EGL: $build_egl" -echo " GLX: $build_glx" -echo " WGL: $build_wgl" -echo " PYTHON: $PYTHON" |