aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile2
-rw-r--r--default-configs/sparc-softmmu.mak1
-rw-r--r--hw/display/Makefile.objs1
-rw-r--r--hw/display/cg3.c385
-rw-r--r--pc-bios/QEMU,cgthree.binbin0 -> 850 bytes
-rw-r--r--pc-bios/README4
6 files changed, 390 insertions, 3 deletions
diff --git a/Makefile b/Makefile
index a28a3c8d49..9ddf8e4797 100644
--- a/Makefile
+++ b/Makefile
@@ -319,7 +319,7 @@ ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
acpi-dsdt.aml q35-acpi-dsdt.aml \
-ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin \
+ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
diff --git a/default-configs/sparc-softmmu.mak b/default-configs/sparc-softmmu.mak
index 8fc93dd643..ab796b3d4f 100644
--- a/default-configs/sparc-softmmu.mak
+++ b/default-configs/sparc-softmmu.mak
@@ -10,6 +10,7 @@ CONFIG_EMPTY_SLOT=y
CONFIG_PCNET_COMMON=y
CONFIG_LANCE=y
CONFIG_TCX=y
+CONFIG_CG3=y
CONFIG_SLAVIO=y
CONFIG_CS4231=y
CONFIG_GRLIB=y
diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
index 540df82600..7ed76a9c24 100644
--- a/hw/display/Makefile.objs
+++ b/hw/display/Makefile.objs
@@ -28,6 +28,7 @@ obj-$(CONFIG_OMAP) += omap_lcdc.o
obj-$(CONFIG_PXA2XX) += pxa2xx_lcd.o
obj-$(CONFIG_SM501) += sm501.o
obj-$(CONFIG_TCX) += tcx.o
+obj-$(CONFIG_CG3) += cg3.o
obj-$(CONFIG_VGA) += vga.o
diff --git a/hw/display/cg3.c b/hw/display/cg3.c
new file mode 100644
index 0000000000..6db8ca362a
--- /dev/null
+++ b/hw/display/cg3.c
@@ -0,0 +1,385 @@
+/*
+ * QEMU CG3 Frame buffer
+ *
+ * Copyright (c) 2012 Bob Breuer
+ * Copyright (c) 2013 Mark Cave-Ayland
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu/error-report.h"
+#include "ui/console.h"
+#include "hw/sysbus.h"
+#include "hw/loader.h"
+
+/* Change to 1 to enable debugging */
+#define DEBUG_CG3 0
+
+#define CG3_ROM_FILE "QEMU,cgthree.bin"
+#define FCODE_MAX_ROM_SIZE 0x10000
+
+#define CG3_REG_SIZE 0x20
+
+#define CG3_REG_BT458_ADDR 0x0
+#define CG3_REG_BT458_COLMAP 0x4
+#define CG3_REG_FBC_CTRL 0x10
+#define CG3_REG_FBC_STATUS 0x11
+#define CG3_REG_FBC_CURSTART 0x12
+#define CG3_REG_FBC_CUREND 0x13
+#define CG3_REG_FBC_VCTRL 0x14
+
+/* Control register flags */
+#define CG3_CR_ENABLE_INTS 0x80
+
+/* Status register flags */
+#define CG3_SR_PENDING_INT 0x80
+#define CG3_SR_1152_900_76_B 0x60
+#define CG3_SR_ID_COLOR 0x01
+
+#define CG3_VRAM_SIZE 0x100000
+#define CG3_VRAM_OFFSET 0x800000
+
+#define DPRINTF(fmt, ...) do { \
+ if (DEBUG_CG3) { \
+ printf("CG3: " fmt , ## __VA_ARGS__); \
+ } \
+} while (0);
+
+#define TYPE_CG3 "cgthree"
+#define CG3(obj) OBJECT_CHECK(CG3State, (obj), TYPE_CG3)
+
+typedef struct CG3State {
+ SysBusDevice parent_obj;
+
+ QemuConsole *con;
+ qemu_irq irq;
+ hwaddr prom_addr;
+ MemoryRegion vram_mem;
+ MemoryRegion rom;
+ MemoryRegion reg;
+ uint32_t vram_size;
+ int full_update;
+ uint8_t regs[16];
+ uint8_t r[256], g[256], b[256];
+ uint16_t width, height, depth;
+ uint8_t dac_index, dac_state;
+} CG3State;
+
+static void cg3_update_display(void *opaque)
+{
+ CG3State *s = opaque;
+ DisplaySurface *surface = qemu_console_surface(s->con);
+ const uint8_t *pix;
+ uint32_t *data;
+ uint32_t dval;
+ int x, y, y_start;
+ unsigned int width, height;
+ ram_addr_t page, page_min, page_max;
+
+ if (surface_bits_per_pixel(surface) != 32) {
+ return;
+ }
+ width = s->width;
+ height = s->height;
+
+ y_start = -1;
+ page_min = -1;
+ page_max = 0;
+ page = 0;
+ pix = memory_region_get_ram_ptr(&s->vram_mem);
+ data = (uint32_t *)surface_data(surface);
+
+ for (y = 0; y < height; y++) {
+ int update = s->full_update;
+
+ page = (y * width) & TARGET_PAGE_MASK;
+ update |= memory_region_get_dirty(&s->vram_mem, page, page + width,
+ DIRTY_MEMORY_VGA);
+ if (update) {
+ if (y_start < 0) {
+ y_start = y;
+ }
+ if (page < page_min) {
+ page_min = page;
+ }
+ if (page > page_max) {
+ page_max = page;
+ }
+
+ for (x = 0; x < width; x++) {
+ dval = *pix++;
+ dval = (s->r[dval] << 16) | (s->g[dval] << 8) | s->b[dval];
+ *data++ = dval;
+ }
+ } else {
+ if (y_start >= 0) {
+ dpy_gfx_update(s->con, 0, y_start, s->width, y - y_start);
+ y_start = -1;
+ }
+ pix += width;
+ data += width;
+ }
+ }
+ s->full_update = 0;
+ if (y_start >= 0) {
+ dpy_gfx_update(s->con, 0, y_start, s->width, y - y_start);
+ }
+ if (page_max >= page_min) {
+ memory_region_reset_dirty(&s->vram_mem,
+ page_min, page_max - page_min + TARGET_PAGE_SIZE,
+ DIRTY_MEMORY_VGA);
+ }
+ /* vsync interrupt? */
+ if (s->regs[0] & CG3_CR_ENABLE_INTS) {
+ s->regs[1] |= CG3_SR_PENDING_INT;
+ qemu_irq_raise(s->irq);
+ }
+}
+
+static void cg3_invalidate_display(void *opaque)
+{
+ CG3State *s = opaque;
+
+ memory_region_set_dirty(&s->vram_mem, 0, CG3_VRAM_SIZE);
+}
+
+static uint64_t cg3_reg_read(void *opaque, hwaddr addr, unsigned size)
+{
+ CG3State *s = opaque;
+ int val;
+
+ switch (addr) {
+ case CG3_REG_BT458_ADDR:
+ case CG3_REG_BT458_COLMAP:
+ val = 0;
+ break;
+ case CG3_REG_FBC_CTRL:
+ val = s->regs[0];
+ break;
+ case CG3_REG_FBC_STATUS:
+ /* monitor ID 6, board type = 1 (color) */
+ val = s->regs[1] | CG3_SR_1152_900_76_B | CG3_SR_ID_COLOR;
+ break;
+ case CG3_REG_FBC_CURSTART ... CG3_REG_SIZE:
+ val = s->regs[addr - 0x10];
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "cg3: Unimplemented register read "
+ "reg 0x%" HWADDR_PRIx " size 0x%x\n",
+ addr, size);
+ val = 0;
+ break;
+ }
+ DPRINTF("read %02x from reg %" HWADDR_PRIx "\n", val, addr);
+ return val;
+}
+
+static void cg3_reg_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ CG3State *s = opaque;
+ uint8_t regval;
+ int i;
+
+ DPRINTF("write %" PRIx64 " to reg %" HWADDR_PRIx " size %d\n",
+ val, addr, size);
+
+ switch (addr) {
+ case CG3_REG_BT458_ADDR:
+ s->dac_index = val;
+ s->dac_state = 0;
+ break;
+ case CG3_REG_BT458_COLMAP:
+ /* This register can be written to as either a long word or a byte */
+ if (size == 1) {
+ val <<= 24;
+ }
+
+ for (i = 0; i < size; i++) {
+ regval = val >> 24;
+
+ switch (s->dac_state) {
+ case 0:
+ s->r[s->dac_index] = regval;
+ s->dac_state++;
+ break;
+ case 1:
+ s->g[s->dac_index] = regval;
+ s->dac_state++;
+ break;
+ case 2:
+ s->b[s->dac_index] = regval;
+ /* Index autoincrement */
+ s->dac_index = (s->dac_index + 1) & 0xff;
+ default:
+ s->dac_state = 0;
+ break;
+ }
+ val <<= 8;
+ }
+ s->full_update = 1;
+ break;
+ case CG3_REG_FBC_CTRL:
+ s->regs[0] = val;
+ break;
+ case CG3_REG_FBC_STATUS:
+ if (s->regs[1] & CG3_SR_PENDING_INT) {
+ /* clear interrupt */
+ s->regs[1] &= ~CG3_SR_PENDING_INT;
+ qemu_irq_lower(s->irq);
+ }
+ break;
+ case CG3_REG_FBC_CURSTART ... CG3_REG_SIZE:
+ s->regs[addr - 0x10] = val;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "cg3: Unimplemented register write "
+ "reg 0x%" HWADDR_PRIx " size 0x%x value 0x%" PRIx64 "\n",
+ addr, size, val);
+ break;
+ }
+}
+
+static const MemoryRegionOps cg3_reg_ops = {
+ .read = cg3_reg_read,
+ .write = cg3_reg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
+static const GraphicHwOps cg3_ops = {
+ .invalidate = cg3_invalidate_display,
+ .gfx_update = cg3_update_display,
+};
+
+static void cg3_realizefn(DeviceState *dev, Error **errp)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ CG3State *s = CG3(dev);
+ int ret;
+ char *fcode_filename;
+
+ /* FCode ROM */
+ memory_region_init_ram(&s->rom, NULL, "cg3.prom", FCODE_MAX_ROM_SIZE);
+ vmstate_register_ram_global(&s->rom);
+ memory_region_set_readonly(&s->rom, true);
+ sysbus_init_mmio(sbd, &s->rom);
+
+ fcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, CG3_ROM_FILE);
+ if (fcode_filename) {
+ ret = load_image_targphys(fcode_filename, s->prom_addr,
+ FCODE_MAX_ROM_SIZE);
+ if (ret < 0 || ret > FCODE_MAX_ROM_SIZE) {
+ error_report("cg3: could not load prom '%s'", CG3_ROM_FILE);
+ }
+ }
+
+ memory_region_init_io(&s->reg, NULL, &cg3_reg_ops, s, "cg3.reg",
+ CG3_REG_SIZE);
+ sysbus_init_mmio(sbd, &s->reg);
+
+ memory_region_init_ram(&s->vram_mem, NULL, "cg3.vram", s->vram_size);
+ vmstate_register_ram_global(&s->vram_mem);
+ sysbus_init_mmio(sbd, &s->vram_mem);
+
+ sysbus_init_irq(sbd, &s->irq);
+
+ s->con = graphic_console_init(DEVICE(dev), &cg3_ops, s);
+ qemu_console_resize(s->con, s->width, s->height);
+}
+
+static int vmstate_cg3_post_load(void *opaque, int version_id)
+{
+ CG3State *s = opaque;
+
+ cg3_invalidate_display(s);
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_cg3 = {
+ .name = "cg3",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = vmstate_cg3_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT16(height, CG3State),
+ VMSTATE_UINT16(width, CG3State),
+ VMSTATE_UINT16(depth, CG3State),
+ VMSTATE_BUFFER(r, CG3State),
+ VMSTATE_BUFFER(g, CG3State),
+ VMSTATE_BUFFER(b, CG3State),
+ VMSTATE_UINT8(dac_index, CG3State),
+ VMSTATE_UINT8(dac_state, CG3State),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void cg3_reset(DeviceState *d)
+{
+ CG3State *s = CG3(d);
+
+ /* Initialize palette */
+ memset(s->r, 0, 256);
+ memset(s->g, 0, 256);
+ memset(s->b, 0, 256);
+
+ s->dac_state = 0;
+ s->full_update = 1;
+ qemu_irq_lower(s->irq);
+}
+
+static Property cg3_properties[] = {
+ DEFINE_PROP_UINT32("vram-size", CG3State, vram_size, -1),
+ DEFINE_PROP_UINT16("width", CG3State, width, -1),
+ DEFINE_PROP_UINT16("height", CG3State, height, -1),
+ DEFINE_PROP_UINT16("depth", CG3State, depth, -1),
+ DEFINE_PROP_UINT64("prom-addr", CG3State, prom_addr, -1),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void cg3_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = cg3_realizefn;
+ dc->reset = cg3_reset;
+ dc->vmsd = &vmstate_cg3;
+ dc->props = cg3_properties;
+}
+
+static const TypeInfo cg3_info = {
+ .name = TYPE_CG3,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(CG3State),
+ .class_init = cg3_class_init,
+};
+
+static void cg3_register_types(void)
+{
+ type_register_static(&cg3_info);
+}
+
+type_init(cg3_register_types)
diff --git a/pc-bios/QEMU,cgthree.bin b/pc-bios/QEMU,cgthree.bin
new file mode 100644
index 0000000000..6fec946207
--- /dev/null
+++ b/pc-bios/QEMU,cgthree.bin
Binary files differ
diff --git a/pc-bios/README b/pc-bios/README
index f1900686dc..5914200b23 100644
--- a/pc-bios/README
+++ b/pc-bios/README
@@ -11,8 +11,8 @@
firmware implementation. The goal is to implement a 100% IEEE
1275-1994 (referred to as Open Firmware) compliant firmware.
The included images for PowerPC (for 32 and 64 bit PPC CPUs),
- Sparc32 (including QEMU,tcx.bin) and Sparc64 are built from OpenBIOS SVN
- revision 1246.
+ Sparc32 (including QEMU,tcx.bin and QEMU,cgthree.bin) and Sparc64 are built
+ from OpenBIOS SVN revision 1246.
- SLOF (Slimline Open Firmware) is a free IEEE 1275 Open Firmware
implementation for certain IBM POWER hardware. The sources are at