diff options
Diffstat (limited to 'linux/mtd-abi.h')
| -rw-r--r-- | linux/mtd-abi.h | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/linux/mtd-abi.h b/linux/mtd-abi.h deleted file mode 100644 index a63a99a4..00000000 --- a/linux/mtd-abi.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (c) 1999-2010 David Woodhouse <dwmw2@infradead.org> et al. - * Copyright (c) 2010-2017 The strace developers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#ifndef __MTD_ABI_H__ -#define __MTD_ABI_H__ - -#include <linux/types.h> - -struct erase_info_user { - __u32 start; - __u32 length; -}; - -struct erase_info_user64 { - __u64 start; - __u64 length; -}; - -struct mtd_oob_buf { - __u32 start; - __u32 length; - unsigned char *ptr; -}; - -struct mtd_oob_buf64 { - __u64 start; - __u32 pad; - __u32 length; - __u64 usr_ptr; -}; - -/** - * MTD operation modes - * - * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) - * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas - * which are defined by the internal ecclayout - * @MTD_OPS_RAW: data are transferred as-is, with no error correction; - * this mode implies %MTD_OPS_PLACE_OOB - * - * These modes can be passed to ioctl(MEMWRITE) and are also used internally. - * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. - * %MTD_FILE_MODE_RAW. - */ -enum { - MTD_OPS_PLACE_OOB = 0, - MTD_OPS_AUTO_OOB = 1, - MTD_OPS_RAW = 2, -}; - -/** - * struct mtd_write_req - data structure for requesting a write operation - * - * @start: start address - * @len: length of data buffer - * @ooblen: length of OOB buffer - * @usr_data: user-provided data buffer - * @usr_oob: user-provided OOB buffer - * @mode: MTD mode (see "MTD operation modes") - * @padding: reserved, must be set to 0 - * - * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB - * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to - * write data-only, set @usr_oob == NULL. However, setting both @usr_data and - * @usr_oob to NULL is not allowed. - */ -struct mtd_write_req { - __u64 start; - __u64 len; - __u64 ooblen; - __u64 usr_data; - __u64 usr_oob; - __u8 mode; - __u8 padding[7]; -}; - -#define MTD_ABSENT 0 -#define MTD_RAM 1 -#define MTD_ROM 2 -#define MTD_NORFLASH 3 -#define MTD_NANDFLASH 4 -#define MTD_DATAFLASH 6 -#define MTD_UBIVOLUME 7 -#define MTD_MLCNANDFLASH 8 - -#define MTD_WRITEABLE 0x400 /* Device is writeable */ -#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ -#define MTD_NO_ERASE 0x1000 /* No erase necessary */ -#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */ - -/* Some common devices / combinations of capabilities */ -#define MTD_CAP_ROM 0 -#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) -#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE) -#define MTD_CAP_NANDFLASH (MTD_WRITEABLE) - -/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */ -#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) -#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) -#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme -#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) -#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default - -/* OTP mode selection */ -#define MTD_OTP_OFF 0 -#define MTD_OTP_FACTORY 1 -#define MTD_OTP_USER 2 - -struct mtd_info_user { - __u8 type; - __u32 flags; - __u32 size; /* Total size of the MTD */ - __u32 erasesize; - __u32 writesize; - __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */ - __u64 padding; /* Old obsolete field; do not use */ -}; - -struct region_info_user { - __u32 offset; /* At which this region starts, - * from the beginning of the MTD */ - __u32 erasesize; /* For this region */ - __u32 numblocks; /* Number of blocks in this region */ - __u32 regionindex; -}; - -struct otp_info { - __u32 start; - __u32 length; - __u32 locked; -}; - -/* - * Note, the following ioctl existed in the past and was removed: - * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) - * Try to avoid adding a new ioctl with the same ioctl number. - */ - -/* Get basic MTD characteristics info (better to use sysfs) */ -#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) -/* Erase segment of MTD */ -#define MEMERASE _IOW('M', 2, struct erase_info_user) -/* Write out-of-band data from MTD */ -#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) -/* Read out-of-band data from MTD */ -#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) -/* Lock a chip (for MTD that supports it) */ -#define MEMLOCK _IOW('M', 5, struct erase_info_user) -/* Unlock a chip (for MTD that supports it) */ -#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) -/* Get the number of different erase regions */ -#define MEMGETREGIONCOUNT _IOR('M', 7, int) -/* Get information about the erase region for a specific index */ -#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) -/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ -#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) -/* Check if an eraseblock is bad */ -#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t) -/* Mark an eraseblock as bad */ -#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t) -/* Set OTP (One-Time Programmable) mode (factory vs. user) */ -#define OTPSELECT _IOR('M', 13, int) -/* Get number of OTP (One-Time Programmable) regions */ -#define OTPGETREGIONCOUNT _IOW('M', 14, int) -/* Get all OTP (One-Time Programmable) info about MTD */ -#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) -/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ -#define OTPLOCK _IOR('M', 16, struct otp_info) -/* Get ECC layout (deprecated) */ -#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user) -/* Get statistics about corrected/uncorrected errors */ -#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) -/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ -#define MTDFILEMODE _IO('M', 19) -/* Erase segment of MTD (supports 64-bit address) */ -#define MEMERASE64 _IOW('M', 20, struct erase_info_user64) -/* Write data to OOB (64-bit version) */ -#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64) -/* Read data from OOB (64-bit version) */ -#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64) -/* Check if chip is locked (for MTD that supports it) */ -#define MEMISLOCKED _IOR('M', 23, struct erase_info_user) -/* - * Most generic write interface; can write in-band and/or out-of-band in various - * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes - * without OOB, e.g., NOR flash. - */ -#define MEMWRITE _IOWR('M', 24, struct mtd_write_req) - -/* - * Obsolete legacy interface. Keep it in order not to break userspace - * interfaces - */ -struct nand_oobinfo { - __u32 useecc; - __u32 eccbytes; - __u32 oobfree[8][2]; - __u32 eccpos[32]; -}; - -struct nand_oobfree { - __u32 offset; - __u32 length; -}; - -#define MTD_MAX_OOBFREE_ENTRIES 8 -#define MTD_MAX_ECCPOS_ENTRIES 64 -/* - * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl - * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a - * complete set of ECC information. The ioctl truncates the larger internal - * structure to retain binary compatibility with the static declaration of the - * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of - * the user struct, not the MAX size of the internal struct nand_ecclayout. - */ -struct nand_ecclayout_user { - __u32 eccbytes; - __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES]; - __u32 oobavail; - struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; -}; - -/** - * struct mtd_ecc_stats - error correction stats - * - * @corrected: number of corrected bits - * @failed: number of uncorrectable errors - * @badblocks: number of bad blocks in this partition - * @bbtblocks: number of blocks reserved for bad block tables - */ -struct mtd_ecc_stats { - __u32 corrected; - __u32 failed; - __u32 badblocks; - __u32 bbtblocks; -}; - -/* - * MTD file modes - for read/write access to MTD - * - * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled - * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode - * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode - * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled - * - * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained - * separately for each open file descriptor. - * - * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - - * raw access to the flash, without error correction or autoplacement schemes. - * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode - * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is - * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). - */ -enum mtd_file_modes { - MTD_FILE_MODE_NORMAL = MTD_OTP_OFF, - MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY, - MTD_FILE_MODE_OTP_USER = MTD_OTP_USER, - MTD_FILE_MODE_RAW, -}; - -#endif /* __MTD_ABI_H__ */ |