path: root/perf/bz2.c

// This benchmark is basically bzip2 (mashed to be a single file)
// compressing and decompressing some data.  It tests Valgrind's handling of
// realistic and "difficult" (ie. lots of branches and memory accesses)
// integer code.  Execution is spread out over quite a few basic blocks; 
// --profile-flags indicates that to get to the top 90%th percentile of
// dynamic BB counts requires considering the top 51 basic blocks

// This program can be used both as part of the performance test
// suite, in which case we want it to run for quite a while,
// and as part of the regression (correctness) test suite, in
// which case we want it to run quickly and be verbose.
// So it does the latter iff given a command line arg.

// Licensing: the code within is mostly taken from bzip2, which has a BSD
// license.  There is a little code from VEX, which is licensed under GPLv2
// And it's all written by Julian Seward.

#define BZ_NO_STDIO


/*-------------------------------------------------------------*/
/*--- Private header file for the library.                  ---*/
/*---                                       bzlib_private.h ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/


#ifndef _BZLIB_PRIVATE_H
#define _BZLIB_PRIVATE_H

#include <stdlib.h>

#ifndef BZ_NO_STDIO
#include <stdio.h>
#include <ctype.h>
#include <string.h>
#endif


/*-------------------------------------------------------------*/
/*--- Public header file for the library.                   ---*/
/*---                                               bzlib.h ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/


#ifndef _BZLIB_H
#define _BZLIB_H

#ifdef __cplusplus
extern "C" {
#endif

#define BZ_RUN               0
#define BZ_FLUSH             1
#define BZ_FINISH            2

#define BZ_OK                0
#define BZ_RUN_OK            1
#define BZ_FLUSH_OK          2
#define BZ_FINISH_OK         3
#define BZ_STREAM_END        4
#define BZ_SEQUENCE_ERROR    (-1)
#define BZ_PARAM_ERROR       (-2)
#define BZ_MEM_ERROR         (-3)
#define BZ_DATA_ERROR        (-4)
#define BZ_DATA_ERROR_MAGIC  (-5)
#define BZ_IO_ERROR          (-6)
#define BZ_UNEXPECTED_EOF    (-7)
#define BZ_OUTBUFF_FULL      (-8)
#define BZ_CONFIG_ERROR      (-9)

typedef 
   struct {
      char *next_in;
      unsigned int avail_in;
      unsigned int total_in_lo32;
      unsigned int total_in_hi32;

      char *next_out;
      unsigned int avail_out;
      unsigned int total_out_lo32;
      unsigned int total_out_hi32;

      void *state;

      void *(*bzalloc)(void *,int,int);
      void (*bzfree)(void *,void *);
      void *opaque;
   } 
   bz_stream;


#ifndef BZ_IMPORT
#define BZ_EXPORT
#endif

#ifndef BZ_NO_STDIO
/* Need a definitition for FILE */
#include <stdio.h>
#endif

#ifdef _WIN32
#   include <windows.h>
#   ifdef small
      /* windows.h define small to char */
#      undef small
#   endif
#   ifdef BZ_EXPORT
#   define BZ_API(func) WINAPI func
#   define BZ_EXTERN extern
#   else
   /* import windows dll dynamically */
#   define BZ_API(func) (WINAPI * func)
#   define BZ_EXTERN
#   endif
#else
#   define BZ_API(func) func
#   define BZ_EXTERN extern
#endif


/*-- Core (low-level) library functions --*/

BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( 
      bz_stream* strm, 
      int        blockSize100k, 
      int        verbosity, 
      int        workFactor 
   );

BZ_EXTERN int BZ_API(BZ2_bzCompress) ( 
      bz_stream* strm, 
      int action 
   );

BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( 
      bz_stream* strm 
   );

BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( 
      bz_stream *strm, 
      int       verbosity, 
      int       small
   );

BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( 
      bz_stream* strm 
   );

BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( 
      bz_stream *strm 
   );



/*-- High(er) level library functions --*/

#ifndef BZ_NO_STDIO
#define BZ_MAX_UNUSED 5000

typedef void BZFILE;

BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( 
      int*  bzerror,   
      FILE* f, 
      int   verbosity, 
      int   small,
      void* unused,    
      int   nUnused 
   );

BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( 
      int*    bzerror, 
      BZFILE* b 
   );

BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( 
      int*    bzerror, 
      BZFILE* b, 
      void**  unused,  
      int*    nUnused 
   );

BZ_EXTERN int BZ_API(BZ2_bzRead) ( 
      int*    bzerror, 
      BZFILE* b, 
      void*   buf, 
      int     len 
   );

BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( 
      int*  bzerror,      
      FILE* f, 
      int   blockSize100k, 
      int   verbosity, 
      int   workFactor 
   );

BZ_EXTERN void BZ_API(BZ2_bzWrite) ( 
      int*    bzerror, 
      BZFILE* b, 
      void*   buf, 
      int     len 
   );

BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( 
      int*          bzerror, 
      BZFILE*       b, 
      int           abandon, 
      unsigned int* nbytes_in, 
      unsigned int* nbytes_out 
   );

BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( 
      int*          bzerror, 
      BZFILE*       b, 
      int           abandon, 
      unsigned int* nbytes_in_lo32, 
      unsigned int* nbytes_in_hi32, 
      unsigned int* nbytes_out_lo32, 
      unsigned int* nbytes_out_hi32
   );
#endif


/*-- Utility functions --*/

BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( 
      char*         dest, 
      unsigned int* destLen,
      char*         source, 
      unsigned int  sourceLen,
      int           blockSize100k, 
      int           verbosity, 
      int           workFactor 
   );

BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( 
      char*         dest, 
      unsigned int* destLen,
      char*         source, 
      unsigned int  sourceLen,
      int           small, 
      int           verbosity 
   );


/*--
   Code contributed by Yoshioka Tsuneo
   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
   to support better zlib compatibility.
   This code is not _officially_ part of libbzip2 (yet);
   I haven't tested it, documented it, or considered the
   threading-safeness of it.
   If this code breaks, please contact both Yoshioka and me.
--*/

BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
      void
   );

#ifndef BZ_NO_STDIO
BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
      const char *path,
      const char *mode
   );

BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
      int        fd,
      const char *mode
   );
         
BZ_EXTERN int BZ_API(BZ2_bzread) (
      BZFILE* b, 
      void* buf, 
      int len 
   );

BZ_EXTERN int BZ_API(BZ2_bzwrite) (
      BZFILE* b, 
      void*   buf, 
      int     len 
   );

BZ_EXTERN int BZ_API(BZ2_bzflush) (
      BZFILE* b
   );

BZ_EXTERN void BZ_API(BZ2_bzclose) (
      BZFILE* b
   );

BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
      BZFILE *b, 
      int    *errnum
   );
#endif

#ifdef __cplusplus
}
#endif

#endif

/*-------------------------------------------------------------*/
/*--- end                                           bzlib.h ---*/
/*-------------------------------------------------------------*/




/*-- General stuff. --*/

#define BZ_VERSION  "1.0.3, 17-Oct-2004"

typedef char            Char;
typedef unsigned char   Bool;
typedef unsigned char   UChar;
typedef int             Int32;
typedef unsigned int    UInt32;
typedef short           Int16;
typedef unsigned short  UInt16;

#define True  ((Bool)1)
#define False ((Bool)0)

#ifndef __GNUC__
#define __inline__  /* */
#endif 

#ifndef BZ_NO_STDIO
extern void BZ2_bz__AssertH__fail ( int errcode );
#define AssertH(cond,errcode) \
   { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
#if BZ_DEBUG
#define AssertD(cond,msg) \
   { if (!(cond)) {       \
      fprintf ( stderr,   \
        "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
      exit(1); \
   }}
#else
#define AssertD(cond,msg) /* */
#endif
#define VPrintf0(zf) \
   fprintf(stderr,zf)
#define VPrintf1(zf,za1) \
   fprintf(stderr,zf,za1)
#define VPrintf2(zf,za1,za2) \
   fprintf(stderr,zf,za1,za2)
#define VPrintf3(zf,za1,za2,za3) \
   fprintf(stderr,zf,za1,za2,za3)
#define VPrintf4(zf,za1,za2,za3,za4) \
   fprintf(stderr,zf,za1,za2,za3,za4)
#define VPrintf5(zf,za1,za2,za3,za4,za5) \
   fprintf(stderr,zf,za1,za2,za3,za4,za5)
#else
extern void bz_internal_error ( int errcode );
#define AssertH(cond,errcode) \
   { if (!(cond)) bz_internal_error ( errcode ); }
#define AssertD(cond,msg) /* */
#define VPrintf0(zf) \
   vex_printf(zf)
#define VPrintf1(zf,za1) \
   vex_printf(zf,za1)
#define VPrintf2(zf,za1,za2) \
   vex_printf(zf,za1,za2)
#define VPrintf3(zf,za1,za2,za3) \
   vex_printf(zf,za1,za2,za3)
#define VPrintf4(zf,za1,za2,za3,za4) \
   vex_printf(zf,za1,za2,za3,za4)
#define VPrintf5(zf,za1,za2,za3,za4,za5) \
   vex_printf(zf,za1,za2,za3,za4,za5)
#endif


#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
#define BZFREE(ppp)  (strm->bzfree)(strm->opaque,(ppp))


/*-- Header bytes. --*/

#define BZ_HDR_B 0x42   /* 'B' */
#define BZ_HDR_Z 0x5a   /* 'Z' */
#define BZ_HDR_h 0x68   /* 'h' */
#define BZ_HDR_0 0x30   /* '0' */
  
/*-- Constants for the back end. --*/

#define BZ_MAX_ALPHA_SIZE 258
#define BZ_MAX_CODE_LEN    23

#define BZ_RUNA 0
#define BZ_RUNB 1

#define BZ_N_GROUPS 6
#define BZ_G_SIZE   50
#define BZ_N_ITERS  4

#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))



/*-- Stuff for randomising repetitive blocks. --*/

extern Int32 BZ2_rNums[512];

#define BZ_RAND_DECLS                          \
   Int32 rNToGo;                               \
   Int32 rTPos                                 \

#define BZ_RAND_INIT_MASK                      \
   s->rNToGo = 0;                              \
   s->rTPos  = 0                               \

#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)

#define BZ_RAND_UPD_MASK                       \
   if (s->rNToGo == 0) {                       \
      s->rNToGo = BZ2_rNums[s->rTPos];         \
      s->rTPos++;                              \
      if (s->rTPos == 512) s->rTPos = 0;       \
   }                                           \
   s->rNToGo--;



/*-- Stuff for doing CRCs. --*/

extern UInt32 BZ2_crc32Table[256];

#define BZ_INITIALISE_CRC(crcVar)              \
{                                              \
   crcVar = 0xffffffffL;                       \
}

#define BZ_FINALISE_CRC(crcVar)                \
{                                              \
   crcVar = ~(crcVar);                         \
}

#define BZ_UPDATE_CRC(crcVar,cha)              \
{                                              \
   crcVar = (crcVar << 8) ^                    \
            BZ2_crc32Table[(crcVar >> 24) ^    \
                           ((UChar)cha)];      \
}



/*-- States and modes for compression. --*/

#define BZ_M_IDLE      1
#define BZ_M_RUNNING   2
#define BZ_M_FLUSHING  3
#define BZ_M_FINISHING 4

#define BZ_S_OUTPUT    1
#define BZ_S_INPUT     2

#define BZ_N_RADIX 2
#define BZ_N_QSORT 12
#define BZ_N_SHELL 18
#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)




/*-- Structure holding all the compression-side stuff. --*/

typedef
   struct {
      /* pointer back to the struct bz_stream */
      bz_stream* strm;

      /* mode this stream is in, and whether inputting */
      /* or outputting data */
      Int32    mode;
      Int32    state;

      /* remembers avail_in when flush/finish requested */
      UInt32   avail_in_expect;

      /* for doing the block sorting */
      UInt32*  arr1;
      UInt32*  arr2;
      UInt32*  ftab;
      Int32    origPtr;

      /* aliases for arr1 and arr2 */
      UInt32*  ptr;
      UChar*   block;
      UInt16*  mtfv;
      UChar*   zbits;

      /* for deciding when to use the fallback sorting algorithm */
      Int32    workFactor;

      /* run-length-encoding of the input */
      UInt32   state_in_ch;
      Int32    state_in_len;
      BZ_RAND_DECLS;

      /* input and output limits and current posns */
      Int32    nblock;
      Int32    nblockMAX;
      Int32    numZ;
      Int32    state_out_pos;

      /* map of bytes used in block */
      Int32    nInUse;
      Bool     inUse[256];
      UChar    unseqToSeq[256];

      /* the buffer for bit stream creation */
      UInt32   bsBuff;
      Int32    bsLive;

      /* block and combined CRCs */
      UInt32   blockCRC;
      UInt32   combinedCRC;

      /* misc administratium */
      Int32    verbosity;
      Int32    blockNo;
      Int32    blockSize100k;

      /* stuff for coding the MTF values */
      Int32    nMTF;
      Int32    mtfFreq    [BZ_MAX_ALPHA_SIZE];
      UChar    selector   [BZ_MAX_SELECTORS];
      UChar    selectorMtf[BZ_MAX_SELECTORS];

      UChar    len     [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      Int32    code    [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      Int32    rfreq   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      /* second dimension: only 3 needed; 4 makes index calculations faster */
      UInt32   len_pack[BZ_MAX_ALPHA_SIZE][4];

   }
   EState;



/*-- externs for compression. --*/

extern void 
BZ2_blockSort ( EState* );

extern void 
BZ2_compressBlock ( EState*, Bool );

extern void 
BZ2_bsInitWrite ( EState* );

extern void 
BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );

extern void 
BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );



/*-- states for decompression. --*/

#define BZ_X_IDLE        1
#define BZ_X_OUTPUT      2

#define BZ_X_MAGIC_1     10
#define BZ_X_MAGIC_2     11
#define BZ_X_MAGIC_3     12
#define BZ_X_MAGIC_4     13
#define BZ_X_BLKHDR_1    14
#define BZ_X_BLKHDR_2    15
#define BZ_X_BLKHDR_3    16
#define BZ_X_BLKHDR_4    17
#define BZ_X_BLKHDR_5    18
#define BZ_X_BLKHDR_6    19
#define BZ_X_BCRC_1      20
#define BZ_X_BCRC_2      21
#define BZ_X_BCRC_3      22
#define BZ_X_BCRC_4      23
#define BZ_X_RANDBIT     24
#define BZ_X_ORIGPTR_1   25
#define BZ_X_ORIGPTR_2   26
#define BZ_X_ORIGPTR_3   27
#define BZ_X_MAPPING_1   28
#define BZ_X_MAPPING_2   29
#define BZ_X_SELECTOR_1  30
#define BZ_X_SELECTOR_2  31
#define BZ_X_SELECTOR_3  32
#define BZ_X_CODING_1    33
#define BZ_X_CODING_2    34
#define BZ_X_CODING_3    35
#define BZ_X_MTF_1       36
#define BZ_X_MTF_2       37
#define BZ_X_MTF_3       38
#define BZ_X_MTF_4       39
#define BZ_X_MTF_5       40
#define BZ_X_MTF_6       41
#define BZ_X_ENDHDR_2    42
#define BZ_X_ENDHDR_3    43
#define BZ_X_ENDHDR_4    44
#define BZ_X_ENDHDR_5    45
#define BZ_X_ENDHDR_6    46
#define BZ_X_CCRC_1      47
#define BZ_X_CCRC_2      48
#define BZ_X_CCRC_3      49
#define BZ_X_CCRC_4      50



/*-- Constants for the fast MTF decoder. --*/

#define MTFA_SIZE 4096
#define MTFL_SIZE 16



/*-- Structure holding all the decompression-side stuff. --*/

typedef
   struct {
      /* pointer back to the struct bz_stream */
      bz_stream* strm;

      /* state indicator for this stream */
      Int32    state;

      /* for doing the final run-length decoding */
      UChar    state_out_ch;
      Int32    state_out_len;
      Bool     blockRandomised;
      BZ_RAND_DECLS;

      /* the buffer for bit stream reading */
      UInt32   bsBuff;
      Int32    bsLive;

      /* misc administratium */
      Int32    blockSize100k;
      Bool     smallDecompress;
      Int32    currBlockNo;
      Int32    verbosity;

      /* for undoing the Burrows-Wheeler transform */
      Int32    origPtr;
      UInt32   tPos;
      Int32    k0;
      Int32    unzftab[256];
      Int32    nblock_used;
      Int32    cftab[257];
      Int32    cftabCopy[257];

      /* for undoing the Burrows-Wheeler transform (FAST) */
      UInt32   *tt;

      /* for undoing the Burrows-Wheeler transform (SMALL) */
      UInt16   *ll16;
      UChar    *ll4;

      /* stored and calculated CRCs */
      UInt32   storedBlockCRC;
      UInt32   storedCombinedCRC;
      UInt32   calculatedBlockCRC;
      UInt32   calculatedCombinedCRC;

      /* map of bytes used in block */
      Int32    nInUse;
      Bool     inUse[256];
      Bool     inUse16[16];
      UChar    seqToUnseq[256];

      /* for decoding the MTF values */
      UChar    mtfa   [MTFA_SIZE];
      Int32    mtfbase[256 / MTFL_SIZE];
      UChar    selector   [BZ_MAX_SELECTORS];
      UChar    selectorMtf[BZ_MAX_SELECTORS];
      UChar    len  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];

      Int32    limit  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      Int32    base   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      Int32    perm   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
      Int32    minLens[BZ_N_GROUPS];

      /* save area for scalars in the main decompress code */
      Int32    save_i;
      Int32    save_j;
      Int32    save_t;
      Int32    save_alphaSize;
      Int32    save_nGroups;
      Int32    save_nSelectors;
      Int32    save_EOB;
      Int32    save_groupNo;
      Int32    save_groupPos;
      Int32    save_nextSym;
      Int32    save_nblockMAX;
      Int32    save_nblock;
      Int32    save_es;
      Int32    save_N;
      Int32    save_curr;
      Int32    save_zt;
      Int32    save_zn; 
      Int32    save_zvec;
      Int32    save_zj;
      Int32    save_gSel;
      Int32    save_gMinlen;
      Int32*   save_gLimit;
      Int32*   save_gBase;
      Int32*   save_gPerm;

   }
   DState;



/*-- Macros for decompression. --*/

#define BZ_GET_FAST(cccc)                     \
    s->tPos = s->tt[s->tPos];                 \
    cccc = (UChar)(s->tPos & 0xff);           \
    s->tPos >>= 8;

#define BZ_GET_FAST_C(cccc)                   \
    c_tPos = c_tt[c_tPos];                    \
    cccc = (UChar)(c_tPos & 0xff);            \
    c_tPos >>= 8;

#define SET_LL4(i,n)                                          \
   { if (((i) & 0x1) == 0)                                    \
        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else    \
        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
   }

#define GET_LL4(i)                             \
   ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)

#define SET_LL(i,n)                          \
   { s->ll16[i] = (UInt16)(n & 0x0000ffff);  \
     SET_LL4(i, n >> 16);                    \
   }

#define GET_LL(i) \
   (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))

#define BZ_GET_SMALL(cccc)                            \
      cccc = BZ2_indexIntoF ( s->tPos, s->cftab );    \
      s->tPos = GET_LL(s->tPos);


/*-- externs for decompression. --*/

extern Int32 
BZ2_indexIntoF ( Int32, Int32* );

extern Int32 
BZ2_decompress ( DState* );

extern void 
BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
                           Int32,  Int32, Int32 );


#endif


/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/

#ifdef BZ_NO_STDIO
#ifndef NULL
#define NULL 0
#endif
#endif


/*-------------------------------------------------------------*/
/*--- end                                   bzlib_private.h ---*/
/*-------------------------------------------------------------*/


/* Something which has the same size as void* on the host.  That is,
   it is 32 bits on a 32-bit host and 64 bits on a 64-bit host, and so
   it can safely be coerced to and from a pointer type on the host
   machine. */
typedef  unsigned long HWord;
typedef  char          HChar;
typedef  signed int    Int;
typedef  unsigned int  UInt;

typedef    signed long long int   Long;
typedef  unsigned long long int   ULong;


/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////

static HWord (*serviceFn)(HWord,HWord) = 0;

#if 0
static char* my_strcpy ( char* dest, const char* src )
{
   char* dest_orig = dest;
   while (*src) *dest++ = *src++;
   *dest = 0;
   return dest_orig;
}

static void* my_memcpy ( void *dest, const void *src, int sz )
{
   const char *s = (const char *)src;
   char *d = (char *)dest;

   while (sz--)
      *d++ = *s++;

   return dest;
}

static void* my_memmove( void *dst, const void *src, unsigned int len )
{
    register char *d;
    register char *s;
    if ( dst > src ) {
        d = (char *)dst + len - 1;
        s = (char *)src + len - 1;
        while ( len >= 4 ) {
            *d-- = *s--;
            *d-- = *s--;
            *d-- = *s--;
            *d-- = *s--;
            len -= 4;
        }
        while ( len-- ) {
            *d-- = *s--;
        }
    } else if ( dst < src ) {
        d = (char *)dst;
        s = (char *)src;
        while ( len >= 4 ) {
            *d++ = *s++;
            *d++ = *s++;
            *d++ = *s++;
            *d++ = *s++;
            len -= 4;
        }
        while ( len-- ) {
            *d++ = *s++;
        }
    }
    return dst;
}
#endif

char* my_strcat ( char* dest, const char* src )
{
   char* dest_orig = dest;
   while (*dest) dest++;
   while (*src) *dest++ = *src++;
   *dest = 0;
   return dest_orig;
}


/////////////////////////////////////////////////////////////////////

static void vex_log_bytes ( char* p, int n )
{
   int i;
   for (i = 0; i < n; i++)
      (*serviceFn)( 1, (int)p[i] );
}

/*---------------------------------------------------------*/
/*--- vex_printf                                        ---*/
/*---------------------------------------------------------*/

/* This should be the only <...> include in the entire VEX library.
   New code for vex_util.c should go above this point. */
#include <stdarg.h>

static HChar vex_toupper ( HChar c )
{
   if (c >= 'a' && c <= 'z')
      return c + ('A' - 'a');
   else
      return c;
}

static Int vex_strlen ( const HChar* str )
{
   Int i = 0;
   while (str[i] != 0) i++;
   return i;
}

Bool vex_streq ( const HChar* s1, const HChar* s2 )
{
   while (True) {
      if (*s1 == 0 && *s2 == 0)
         return True;
      if (*s1 != *s2)
         return False;
      s1++;
      s2++;
   }
}

/* Some flags.  */
#define VG_MSG_SIGNED    1 /* The value is signed. */
#define VG_MSG_ZJUSTIFY  2 /* Must justify with '0'. */
#define VG_MSG_LJUSTIFY  4 /* Must justify on the left. */
#define VG_MSG_PAREN     8 /* Parenthesize if present (for %y) */
#define VG_MSG_COMMA    16 /* Add commas to numbers (for %d, %u) */

/* Copy a string into the buffer. */
static UInt
myvprintf_str ( void(*send)(HChar), Int flags, Int width, HChar* str, 
                Bool capitalise )
{
#  define MAYBE_TOUPPER(ch) (capitalise ? vex_toupper(ch) : (ch))
   UInt ret = 0;
   Int i, extra;
   Int len = vex_strlen(str);

   if (width == 0) {
      ret += len;
      for (i = 0; i < len; i++)
         send(MAYBE_TOUPPER(str[i]));
      return ret;
   }

   if (len > width) {
      ret += width;
      for (i = 0; i < width; i++)
         send(MAYBE_TOUPPER(str[i]));
      return ret;
   }

   extra = width - len;
   if (flags & VG_MSG_LJUSTIFY) {
      ret += extra;
      for (i = 0; i < extra; i++)
         send(' ');
   }
   ret += len;
   for (i = 0; i < len; i++)
      send(MAYBE_TOUPPER(str[i]));
   if (!(flags & VG_MSG_LJUSTIFY)) {
      ret += extra;
      for (i = 0; i < extra; i++)
         send(' ');
   }

#  undef MAYBE_TOUPPER

   return ret;
}

/* Write P into the buffer according to these args:
 *  If SIGN is true, p is a signed.
 *  BASE is the base.
 *  If WITH_ZERO is true, '0' must be added.
 *  WIDTH is the width of the field.
 */
static UInt
myvprintf_int64 ( void(*send)(HChar), Int flags, Int base, Int width, ULong pL)
{
   HChar buf[40];
   Int   ind = 0;
   Int   i, nc = 0;
   Bool  neg = False;
   HChar *digits = "0123456789ABCDEF";
   UInt  ret = 0;
   UInt  p = (UInt)pL;

   if (base < 2 || base > 16)
      return ret;
 
   if ((flags & VG_MSG_SIGNED) && (Int)p < 0) {
      p   = - (Int)p;
      neg = True;
   }

   if (p == 0)
      buf[ind++] = '0';
   else {
      while (p > 0) {
         if ((flags & VG_MSG_COMMA) && 10 == base &&
             0 == (ind-nc) % 3 && 0 != ind) 
         {
            buf[ind++] = ',';
            nc++;
         }
         buf[ind++] = digits[p % base];
         p /= base;
      }
   }

   if (neg)
      buf[ind++] = '-';

   if (width > 0 && !(flags & VG_MSG_LJUSTIFY)) {
      for(; ind < width; ind++) {
	//vassert(ind < 39);
         buf[ind] = ((flags & VG_MSG_ZJUSTIFY) ? '0': ' ');
      }
   }

   /* Reverse copy to buffer.  */
   ret += ind;
   for (i = ind -1; i >= 0; i--) {
      send(buf[i]);
   }
   if (width > 0 && (flags & VG_MSG_LJUSTIFY)) {
      for(; ind < width; ind++) {
	 ret++;
         send(' ');  // Never pad with zeroes on RHS -- changes the value!
      }
   }
   return ret;
}


/* A simple vprintf().  */
static 
UInt vprintf_wrk ( void(*send)(HChar), const HChar *format, va_list vargs )
{
   UInt ret = 0;
   int i;
   int flags;
   int width;
   Bool is_long;

   /* We assume that vargs has already been initialised by the 
      caller, using va_start, and that the caller will similarly
      clean up with va_end.
   */

   for (i = 0; format[i] != 0; i++) {
      if (format[i] != '%') {
         send(format[i]);
	 ret++;
         continue;
      }
      i++;
      /* A '%' has been found.  Ignore a trailing %. */
      if (format[i] == 0)
         break;
      if (format[i] == '%') {
         /* `%%' is replaced by `%'. */
         send('%');
	 ret++;
         continue;
      }
      flags = 0;
      is_long = False;
      width = 0; /* length of the field. */
      if (format[i] == '(') {
	 flags |= VG_MSG_PAREN;
	 i++;
      }
      /* If ',' follows '%', commas will be inserted. */
      if (format[i] == ',') {
         flags |= VG_MSG_COMMA;
         i++;
      }
      /* If '-' follows '%', justify on the left. */
      if (format[i] == '-') {
         flags |= VG_MSG_LJUSTIFY;
         i++;
      }
      /* If '0' follows '%', pads will be inserted. */
      if (format[i] == '0') {
         flags |= VG_MSG_ZJUSTIFY;
         i++;
      }
      /* Compute the field length. */
      while (format[i] >= '0' && format[i] <= '9') {
         width *= 10;
         width += format[i++] - '0';
      }
      while (format[i] == 'l') {
         i++;
         is_long = True;
      }

      switch (format[i]) {
         case 'd': /* %d */
            flags |= VG_MSG_SIGNED;
            if (is_long)
               ret += myvprintf_int64(send, flags, 10, width, 
				      (ULong)(va_arg (vargs, Long)));
            else
               ret += myvprintf_int64(send, flags, 10, width, 
				      (ULong)(va_arg (vargs, Int)));
            break;
         case 'u': /* %u */
            if (is_long)
               ret += myvprintf_int64(send, flags, 10, width, 
				      (ULong)(va_arg (vargs, ULong)));
            else
               ret += myvprintf_int64(send, flags, 10, width, 
				      (ULong)(va_arg (vargs, UInt)));
            break;
         case 'p': /* %p */
	    ret += 2;
            send('0');
            send('x');
            ret += myvprintf_int64(send, flags, 16, width, 
				   (ULong)((HWord)va_arg (vargs, void *)));
            break;
         case 'x': /* %x */
            if (is_long)
               ret += myvprintf_int64(send, flags, 16, width, 
				      (ULong)(va_arg (vargs, ULong)));
            else
               ret += myvprintf_int64(send, flags, 16, width, 
				      (ULong)(va_arg (vargs, UInt)));
            break;
         case 'c': /* %c */
	    ret++;
            send((va_arg (vargs, int)));
            break;
         case 's': case 'S': { /* %s */
            char *str = va_arg (vargs, char *);
            if (str == (char*) 0) str = "(null)";
            ret += myvprintf_str(send, flags, width, str, 
                                 (format[i]=='S'));
            break;
	 }
#        if 0
	 case 'y': { /* %y - print symbol */
	    Char buf[100];
	    Char *cp = buf;
	    Addr a = va_arg(vargs, Addr);

	    if (flags & VG_MSG_PAREN)
	       *cp++ = '(';
	    if (VG_(get_fnname_w_offset)(a, cp, sizeof(buf)-4)) {
	       if (flags & VG_MSG_PAREN) {
		  cp += VG_(strlen)(cp);
		  *cp++ = ')';
		  *cp = '\0';
	       }
	       ret += myvprintf_str(send, flags, width, buf, 0);
	    }
	    break;
	 }
#        endif
         default:
            break;
      }
   }
   return ret;
}


/* A general replacement for printf().  Note that only low-level 
   debugging info should be sent via here.  The official route is to
   to use vg_message().  This interface is deprecated.
*/
static HChar myprintf_buf[1000];
static Int   n_myprintf_buf;

static void add_to_myprintf_buf ( HChar c )
{
   if (c == '\n' || n_myprintf_buf >= 1000-10 /*paranoia*/ ) {
      (*vex_log_bytes)( myprintf_buf, vex_strlen(myprintf_buf) );
      n_myprintf_buf = 0;
      myprintf_buf[n_myprintf_buf] = 0;      
   }
   myprintf_buf[n_myprintf_buf++] = c;
   myprintf_buf[n_myprintf_buf] = 0;
}

static UInt vex_printf ( const char *format, ... )
{
   UInt ret;
   va_list vargs;
   va_start(vargs,format);
   
   n_myprintf_buf = 0;
   myprintf_buf[n_myprintf_buf] = 0;      
   ret = vprintf_wrk ( add_to_myprintf_buf, format, vargs );

   if (n_myprintf_buf > 0) {
      (*vex_log_bytes)( myprintf_buf, n_myprintf_buf );
   }

   va_end(vargs);

   return ret;
}

/*---------------------------------------------------------------*/
/*--- end                                          vex_util.c ---*/
/*---------------------------------------------------------------*/


/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////


/*-------------------------------------------------------------*/
/*--- Decompression machinery                               ---*/
/*---                                          decompress.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/




/*---------------------------------------------------*/
static
void makeMaps_d ( DState* s )
{
   Int32 i;
   s->nInUse = 0;
   for (i = 0; i < 256; i++)
      if (s->inUse[i]) {
         s->seqToUnseq[s->nInUse] = i;
         s->nInUse++;
      }
}


/*---------------------------------------------------*/
#define RETURN(rrr)                               \
   { retVal = rrr; goto save_state_and_return; };

#define GET_BITS(lll,vvv,nnn)                     \
   case lll: s->state = lll;                      \
   while (True) {                                 \
      if (s->bsLive >= nnn) {                     \
         UInt32 v;                                \
         v = (s->bsBuff >>                        \
             (s->bsLive-nnn)) & ((1 << nnn)-1);   \
         s->bsLive -= nnn;                        \
         vvv = v;                                 \
         break;                                   \
      }                                           \
      if (s->strm->avail_in == 0) RETURN(BZ_OK);  \
      s->bsBuff                                   \
         = (s->bsBuff << 8) |                     \
           ((UInt32)                              \
              (*((UChar*)(s->strm->next_in))));   \
      s->bsLive += 8;                             \
      s->strm->next_in++;                         \
      s->strm->avail_in--;                        \
      s->strm->total_in_lo32++;                   \
      if (s->strm->total_in_lo32 == 0)            \
         s->strm->total_in_hi32++;                \
   }

#define GET_UCHAR(lll,uuu)                        \
   GET_BITS(lll,uuu,8)

#define GET_BIT(lll,uuu)                          \
   GET_BITS(lll,uuu,1)

/*---------------------------------------------------*/
#define GET_MTF_VAL(label1,label2,lval)           \
{                                                 \
   if (groupPos == 0) {                           \
      groupNo++;                                  \
      if (groupNo >= nSelectors)                  \
         RETURN(BZ_DATA_ERROR);                   \
      groupPos = BZ_G_SIZE;                       \
      gSel = s->selector[groupNo];                \
      gMinlen = s->minLens[gSel];                 \
      gLimit = &(s->limit[gSel][0]);              \
      gPerm = &(s->perm[gSel][0]);                \
      gBase = &(s->base[gSel][0]);                \
   }                                              \
   groupPos--;                                    \
   zn = gMinlen;                                  \
   GET_BITS(label1, zvec, zn);                    \
   while (1) {                                    \
      if (zn > 20 /* the longest code */)         \
         RETURN(BZ_DATA_ERROR);                   \
      if (zvec <= gLimit[zn]) break;              \
      zn++;                                       \
      GET_BIT(label2, zj);                        \
      zvec = (zvec << 1) | zj;                    \
   };                                             \
   if (zvec - gBase[zn] < 0                       \
       || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE)  \
      RETURN(BZ_DATA_ERROR);                      \
   lval = gPerm[zvec - gBase[zn]];                \
}



/*---------------------------------------------------*/
__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
{
   Int32 nb, na, mid;
   nb = 0;
   na = 256;
   do {
      mid = (nb + na) >> 1;
      if (indx >= cftab[mid]) nb = mid; else na = mid;
   }
   while (na - nb != 1);
   return nb;
}

/*---------------------------------------------------*/
Int32 BZ2_decompress ( DState* s )
{
   UChar      uc;
   Int32      retVal;
   Int32      minLen, maxLen;
   bz_stream* strm = s->strm;

   /* stuff that needs to be saved/restored */
   Int32  i;
   Int32  j;
   Int32  t;
   Int32  alphaSize;
   Int32  nGroups;
   Int32  nSelectors;
   Int32  EOB;
   Int32  groupNo;
   Int32  groupPos;
   Int32  nextSym;
   Int32  nblockMAX;
   Int32  nblock;
   Int32  es;
   Int32  N;
   Int32  curr;
   Int32  zt;
   Int32  zn; 
   Int32  zvec;
   Int32  zj;
   Int32  gSel;
   Int32  gMinlen;
   Int32* gLimit;
   Int32* gBase;
   Int32* gPerm;

   if (s->state == BZ_X_MAGIC_1) {
      /*initialise the save area*/
      s->save_i           = 0;
      s->save_j           = 0;
      s->save_t           = 0;
      s->save_alphaSize   = 0;
      s->save_nGroups     = 0;
      s->save_nSelectors  = 0;
      s->save_EOB         = 0;
      s->save_groupNo     = 0;
      s->save_groupPos    = 0;
      s->save_nextSym     = 0;
      s->save_nblockMAX   = 0;
      s->save_nblock      = 0;
      s->save_es          = 0;
      s->save_N           = 0;
      s->save_curr        = 0;
      s->save_zt          = 0;
      s->save_zn          = 0;
      s->save_zvec        = 0;
      s->save_zj          = 0;
      s->save_gSel        = 0;
      s->save_gMinlen     = 0;
      s->save_gLimit      = NULL;
      s->save_gBase       = NULL;
      s->save_gPerm       = NULL;
   }

   /*restore from the save area*/
   i           = s->save_i;
   j           = s->save_j;
   t           = s->save_t;
   alphaSize   = s->save_alphaSize;
   nGroups     = s->save_nGroups;
   nSelectors  = s->save_nSelectors;
   EOB         = s->save_EOB;
   groupNo     = s->save_groupNo;
   groupPos    = s->save_groupPos;
   nextSym     = s->save_nextSym;
   nblockMAX   = s->save_nblockMAX;
   nblock      = s->save_nblock;
   es          = s->save_es;
   N           = s->save_N;
   curr        = s->save_curr;
   zt          = s->save_zt;
   zn          = s->save_zn; 
   zvec        = s->save_zvec;
   zj          = s->save_zj;
   gSel        = s->save_gSel;
   gMinlen     = s->save_gMinlen;
   gLimit      = s->save_gLimit;
   gBase       = s->save_gBase;
   gPerm       = s->save_gPerm;

   retVal = BZ_OK;

   switch (s->state) {

      GET_UCHAR(BZ_X_MAGIC_1, uc);
      if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC);

      GET_UCHAR(BZ_X_MAGIC_2, uc);
      if (uc != BZ_HDR_Z) RETURN(BZ_DATA_ERROR_MAGIC);

      GET_UCHAR(BZ_X_MAGIC_3, uc)
      if (uc != BZ_HDR_h) RETURN(BZ_DATA_ERROR_MAGIC);

      GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
      if (s->blockSize100k < (BZ_HDR_0 + 1) || 
          s->blockSize100k > (BZ_HDR_0 + 9)) RETURN(BZ_DATA_ERROR_MAGIC);
      s->blockSize100k -= BZ_HDR_0;

      if (s->smallDecompress) {
         s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
         s->ll4  = BZALLOC( 
                      ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar) 
                   );
         if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
      } else {
         s->tt  = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
         if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
      }

      GET_UCHAR(BZ_X_BLKHDR_1, uc);

      if (uc == 0x17) goto endhdr_2;
      if (uc != 0x31) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_BLKHDR_2, uc);
      if (uc != 0x41) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_BLKHDR_3, uc);
      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_BLKHDR_4, uc);
      if (uc != 0x26) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_BLKHDR_5, uc);
      if (uc != 0x53) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_BLKHDR_6, uc);
      if (uc != 0x59) RETURN(BZ_DATA_ERROR);

      s->currBlockNo++;
      if (s->verbosity >= 2)
         VPrintf1 ( "\n    [%d: huff+mtf ", s->currBlockNo );
 
      s->storedBlockCRC = 0;
      GET_UCHAR(BZ_X_BCRC_1, uc);
      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_BCRC_2, uc);
      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_BCRC_3, uc);
      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_BCRC_4, uc);
      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);

      GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);

      s->origPtr = 0;
      GET_UCHAR(BZ_X_ORIGPTR_1, uc);
      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
      GET_UCHAR(BZ_X_ORIGPTR_2, uc);
      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
      GET_UCHAR(BZ_X_ORIGPTR_3, uc);
      s->origPtr = (s->origPtr << 8) | ((Int32)uc);

      if (s->origPtr < 0)
         RETURN(BZ_DATA_ERROR);
      if (s->origPtr > 10 + 100000*s->blockSize100k) 
         RETURN(BZ_DATA_ERROR);

      /*--- Receive the mapping table ---*/
      for (i = 0; i < 16; i++) {
         GET_BIT(BZ_X_MAPPING_1, uc);
         if (uc == 1) 
            s->inUse16[i] = True; else 
            s->inUse16[i] = False;
      }

      for (i = 0; i < 256; i++) s->inUse[i] = False;

      for (i = 0; i < 16; i++)
         if (s->inUse16[i])
            for (j = 0; j < 16; j++) {
               GET_BIT(BZ_X_MAPPING_2, uc);
               if (uc == 1) s->inUse[i * 16 + j] = True;
            }
      makeMaps_d ( s );
      if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
      alphaSize = s->nInUse+2;

      /*--- Now the selectors ---*/
      GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
      if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
      GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
      for (i = 0; i < nSelectors; i++) {
         j = 0;
         while (True) {
            GET_BIT(BZ_X_SELECTOR_3, uc);
            if (uc == 0) break;
            j++;
            if (j >= nGroups) RETURN(BZ_DATA_ERROR);
         }
         s->selectorMtf[i] = j;
      }

      /*--- Undo the MTF values for the selectors. ---*/
      {
         UChar pos[BZ_N_GROUPS], tmp, v;
         for (v = 0; v < nGroups; v++) pos[v] = v;
   
         for (i = 0; i < nSelectors; i++) {
            v = s->selectorMtf[i];
            tmp = pos[v];
            while (v > 0) { pos[v] = pos[v-1]; v--; }
            pos[0] = tmp;
            s->selector[i] = tmp;
         }
      }

      /*--- Now the coding tables ---*/
      for (t = 0; t < nGroups; t++) {
         GET_BITS(BZ_X_CODING_1, curr, 5);
         for (i = 0; i < alphaSize; i++) {
            while (True) {
               if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
               GET_BIT(BZ_X_CODING_2, uc);
               if (uc == 0) break;
               GET_BIT(BZ_X_CODING_3, uc);
               if (uc == 0) curr++; else curr--;
            }
            s->len[t][i] = curr;
         }
      }

      /*--- Create the Huffman decoding tables ---*/
      for (t = 0; t < nGroups; t++) {
         minLen = 32;
         maxLen = 0;
         for (i = 0; i < alphaSize; i++) {
            if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
            if (s->len[t][i] < minLen) minLen = s->len[t][i];
         }
         BZ2_hbCreateDecodeTables ( 
            &(s->limit[t][0]), 
            &(s->base[t][0]), 
            &(s->perm[t][0]), 
            &(s->len[t][0]),
            minLen, maxLen, alphaSize
         );
         s->minLens[t] = minLen;
      }

      /*--- Now the MTF values ---*/

      EOB      = s->nInUse+1;
      nblockMAX = 100000 * s->blockSize100k;
      groupNo  = -1;
      groupPos = 0;

      for (i = 0; i <= 255; i++) s->unzftab[i] = 0;

      /*-- MTF init --*/
      {
         Int32 ii, jj, kk;
         kk = MTFA_SIZE-1;
         for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
            for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
               s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
               kk--;
            }
            s->mtfbase[ii] = kk + 1;
         }
      }
      /*-- end MTF init --*/

      nblock = 0;
      GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);

      while (True) {

         if (nextSym == EOB) break;

         if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {

            es = -1;
            N = 1;
            do {
               if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
               if (nextSym == BZ_RUNB) es = es + (1+1) * N;
               N = N * 2;
               GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
            }
               while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);

            es++;
            uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
            s->unzftab[uc] += es;

            if (s->smallDecompress)
               while (es > 0) {
                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
                  s->ll16[nblock] = (UInt16)uc;
                  nblock++;
                  es--;
               }
            else
               while (es > 0) {
                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
                  s->tt[nblock] = (UInt32)uc;
                  nblock++;
                  es--;
               };

            continue;

         } else {

            if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);

            /*-- uc = MTF ( nextSym-1 ) --*/
            {
               Int32 ii, jj, kk, pp, lno, off;
               UInt32 nn;
               nn = (UInt32)(nextSym - 1);

               if (nn < MTFL_SIZE) {
                  /* avoid general-case expense */
                  pp = s->mtfbase[0];
                  uc = s->mtfa[pp+nn];
                  while (nn > 3) {
                     Int32 z = pp+nn;
                     s->mtfa[(z)  ] = s->mtfa[(z)-1];
                     s->mtfa[(z)-1] = s->mtfa[(z)-2];
                     s->mtfa[(z)-2] = s->mtfa[(z)-3];
                     s->mtfa[(z)-3] = s->mtfa[(z)-4];
                     nn -= 4;
                  }
                  while (nn > 0) { 
                     s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--; 
                  };
                  s->mtfa[pp] = uc;
               } else { 
                  /* general case */
                  lno = nn / MTFL_SIZE;
                  off = nn % MTFL_SIZE;
                  pp = s->mtfbase[lno] + off;
                  uc = s->mtfa[pp];
                  while (pp > s->mtfbase[lno]) { 
                     s->mtfa[pp] = s->mtfa[pp-1]; pp--; 
                  };
                  s->mtfbase[lno]++;
                  while (lno > 0) {
                     s->mtfbase[lno]--;
                     s->mtfa[s->mtfbase[lno]] 
                        = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
                     lno--;
                  }
                  s->mtfbase[0]--;
                  s->mtfa[s->mtfbase[0]] = uc;
                  if (s->mtfbase[0] == 0) {
                     kk = MTFA_SIZE-1;
                     for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
                        for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
                           s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
                           kk--;
                        }
                        s->mtfbase[ii] = kk + 1;
                     }
                  }
               }
            }
            /*-- end uc = MTF ( nextSym-1 ) --*/

            s->unzftab[s->seqToUnseq[uc]]++;
            if (s->smallDecompress)
               s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
               s->tt[nblock]   = (UInt32)(s->seqToUnseq[uc]);
            nblock++;

            GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
            continue;
         }
      }

      /* Now we know what nblock is, we can do a better sanity
         check on s->origPtr.
      */
      if (s->origPtr < 0 || s->origPtr >= nblock)
         RETURN(BZ_DATA_ERROR);

      /*-- Set up cftab to facilitate generation of T^(-1) --*/
      s->cftab[0] = 0;
      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
      for (i = 0; i <= 256; i++) {
         if (s->cftab[i] < 0 || s->cftab[i] > nblock) {
            /* s->cftab[i] can legitimately be == nblock */
            RETURN(BZ_DATA_ERROR);
         }
      }

      s->state_out_len = 0;
      s->state_out_ch  = 0;
      BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
      s->state = BZ_X_OUTPUT;
      if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );

      if (s->smallDecompress) {

         /*-- Make a copy of cftab, used in generation of T --*/
         for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];

         /*-- compute the T vector --*/
         for (i = 0; i < nblock; i++) {
            uc = (UChar)(s->ll16[i]);
            SET_LL(i, s->cftabCopy[uc]);
            s->cftabCopy[uc]++;
         }

         /*-- Compute T^(-1) by pointer reversal on T --*/
         i = s->origPtr;
         j = GET_LL(i);
         do {
            Int32 tmp = GET_LL(j);
            SET_LL(j, i);
            i = j;
            j = tmp;
         }
            while (i != s->origPtr);

         s->tPos = s->origPtr;
         s->nblock_used = 0;
         if (s->blockRandomised) {
            BZ_RAND_INIT_MASK;
            BZ_GET_SMALL(s->k0); s->nblock_used++;
            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
         } else {
            BZ_GET_SMALL(s->k0); s->nblock_used++;
         }

      } else {

         /*-- compute the T^(-1) vector --*/
         for (i = 0; i < nblock; i++) {
            uc = (UChar)(s->tt[i] & 0xff);
            s->tt[s->cftab[uc]] |= (i << 8);
            s->cftab[uc]++;
         }

         s->tPos = s->tt[s->origPtr] >> 8;
         s->nblock_used = 0;
         if (s->blockRandomised) {
            BZ_RAND_INIT_MASK;
            BZ_GET_FAST(s->k0); s->nblock_used++;
            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
         } else {
            BZ_GET_FAST(s->k0); s->nblock_used++;
         }

      }

      RETURN(BZ_OK);



    endhdr_2:

      GET_UCHAR(BZ_X_ENDHDR_2, uc);
      if (uc != 0x72) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_ENDHDR_3, uc);
      if (uc != 0x45) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_ENDHDR_4, uc);
      if (uc != 0x38) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_ENDHDR_5, uc);
      if (uc != 0x50) RETURN(BZ_DATA_ERROR);
      GET_UCHAR(BZ_X_ENDHDR_6, uc);
      if (uc != 0x90) RETURN(BZ_DATA_ERROR);

      s->storedCombinedCRC = 0;
      GET_UCHAR(BZ_X_CCRC_1, uc);
      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_CCRC_2, uc);
      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_CCRC_3, uc);
      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
      GET_UCHAR(BZ_X_CCRC_4, uc);
      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);

      s->state = BZ_X_IDLE;
      RETURN(BZ_STREAM_END);

      default: AssertH ( False, 4001 );
   }

   AssertH ( False, 4002 );

   save_state_and_return:

   s->save_i           = i;
   s->save_j           = j;
   s->save_t           = t;
   s->save_alphaSize   = alphaSize;
   s->save_nGroups     = nGroups;
   s->save_nSelectors  = nSelectors;
   s->save_EOB         = EOB;
   s->save_groupNo     = groupNo;
   s->save_groupPos    = groupPos;
   s->save_nextSym     = nextSym;
   s->save_nblockMAX   = nblockMAX;
   s->save_nblock      = nblock;
   s->save_es          = es;
   s->save_N           = N;
   s->save_curr        = curr;
   s->save_zt          = zt;
   s->save_zn          = zn;
   s->save_zvec        = zvec;
   s->save_zj          = zj;
   s->save_gSel        = gSel;
   s->save_gMinlen     = gMinlen;
   s->save_gLimit      = gLimit;
   s->save_gBase       = gBase;
   s->save_gPerm       = gPerm;

   return retVal;   
}


/*-------------------------------------------------------------*/
/*--- end                                      decompress.c ---*/
/*-------------------------------------------------------------*/

/*-------------------------------------------------------------*/
/*--- Block sorting machinery                               ---*/
/*---                                           blocksort.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.

  To get some idea how the block sorting algorithms in this file 
  work, read my paper 
     On the Performance of BWT Sorting Algorithms
  in Proceedings of the IEEE Data Compression Conference 2000,
  Snowbird, Utah, USA, 27-30 March 2000.  The main sort in this
  file implements the algorithm called  cache  in the paper.
--*/



/*---------------------------------------------*/
/*--- Fallback O(N log(N)^2) sorting        ---*/
/*--- algorithm, for repetitive blocks      ---*/
/*---------------------------------------------*/

/*---------------------------------------------*/
static 
__inline__
void fallbackSimpleSort ( UInt32* fmap, 
                          UInt32* eclass, 
                          Int32   lo, 
                          Int32   hi )
{
   Int32 i, j, tmp;
   UInt32 ec_tmp;

   if (lo == hi) return;

   if (hi - lo > 3) {
      for ( i = hi-4; i >= lo; i-- ) {
         tmp = fmap[i];
         ec_tmp = eclass[tmp];
         for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
            fmap[j-4] = fmap[j];
         fmap[j-4] = tmp;
      }
   }

   for ( i = hi-1; i >= lo; i-- ) {
      tmp = fmap[i];
      ec_tmp = eclass[tmp];
      for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
         fmap[j-1] = fmap[j];
      fmap[j-1] = tmp;
   }
}


/*---------------------------------------------*/
#define fswap(zz1, zz2) \
   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }

#define fvswap(zzp1, zzp2, zzn)       \
{                                     \
   Int32 yyp1 = (zzp1);               \
   Int32 yyp2 = (zzp2);               \
   Int32 yyn  = (zzn);                \
   while (yyn > 0) {                  \
      fswap(fmap[yyp1], fmap[yyp2]);  \
      yyp1++; yyp2++; yyn--;          \
   }                                  \
}


#define fmin(a,b) ((a) < (b)) ? (a) : (b)

#define fpush(lz,hz) { stackLo[sp] = lz; \
                       stackHi[sp] = hz; \
                       sp++; }

#define fpop(lz,hz) { sp--;              \
                      lz = stackLo[sp];  \
                      hz = stackHi[sp]; }

#define FALLBACK_QSORT_SMALL_THRESH 10
#define FALLBACK_QSORT_STACK_SIZE   100


static
void fallbackQSort3 ( UInt32* fmap, 
                      UInt32* eclass,
                      Int32   loSt, 
                      Int32   hiSt )
{
   Int32 unLo, unHi, ltLo, gtHi, n, m;
   Int32 sp, lo, hi;
   UInt32 med, r, r3;
   Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
   Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];

   r = 0;

   sp = 0;
   fpush ( loSt, hiSt );

   while (sp > 0) {

      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );

      fpop ( lo, hi );
      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
         fallbackSimpleSort ( fmap, eclass, lo, hi );
         continue;
      }

      /* Random partitioning.  Median of 3 sometimes fails to
         avoid bad cases.  Median of 9 seems to help but 
         looks rather expensive.  This too seems to work but
         is cheaper.  Guidance for the magic constants 
         7621 and 32768 is taken from Sedgewick's algorithms
         book, chapter 35.
      */
      r = ((r * 7621) + 1) % 32768;
      r3 = r % 3;
      if (r3 == 0) med = eclass[fmap[lo]]; else
      if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
                   med = eclass[fmap[hi]];

      unLo = ltLo = lo;
      unHi = gtHi = hi;

      while (1) {
         while (1) {
            if (unLo > unHi) break;
            n = (Int32)eclass[fmap[unLo]] - (Int32)med;
            if (n == 0) { 
               fswap(fmap[unLo], fmap[ltLo]); 
               ltLo++; unLo++; 
               continue; 
            };
            if (n > 0) break;
            unLo++;
         }
         while (1) {
            if (unLo > unHi) break;
            n = (Int32)eclass[fmap[unHi]] - (Int32)med;
            if (n == 0) { 
               fswap(fmap[unHi], fmap[gtHi]); 
               gtHi--; unHi--; 
               continue; 
            };
            if (n < 0) break;
            unHi--;
         }
         if (unLo > unHi) break;
         fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
      }

      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );

      if (gtHi < ltLo) continue;

      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);

      n = lo + unLo - ltLo - 1;
      m = hi - (gtHi - unHi) + 1;

      if (n - lo > hi - m) {
         fpush ( lo, n );
         fpush ( m, hi );
      } else {
         fpush ( m, hi );
         fpush ( lo, n );
      }
   }
}

#undef fmin
#undef fpush
#undef fpop
#undef fswap
#undef fvswap
#undef FALLBACK_QSORT_SMALL_THRESH
#undef FALLBACK_QSORT_STACK_SIZE


/*---------------------------------------------*/
/* Pre:
      nblock > 0
      eclass exists for [0 .. nblock-1]
      ((UChar*)eclass) [0 .. nblock-1] holds block
      ptr exists for [0 .. nblock-1]

   Post:
      ((UChar*)eclass) [0 .. nblock-1] holds block
      All other areas of eclass destroyed
      fmap [0 .. nblock-1] holds sorted order
      bhtab [ 0 .. 2+(nblock/32) ] destroyed
*/

#define       SET_BH(zz)  bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
#define     CLEAR_BH(zz)  bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
#define     ISSET_BH(zz)  (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
#define      WORD_BH(zz)  bhtab[(zz) >> 5]
#define UNALIGNED_BH(zz)  ((zz) & 0x01f)

static
void fallbackSort ( UInt32* fmap, 
                    UInt32* eclass, 
                    UInt32* bhtab,
                    Int32   nblock,
                    Int32   verb )
{
   Int32 ftab[257];
   Int32 ftabCopy[256];
   Int32 H, i, j, k, l, r, cc, cc1;
   Int32 nNotDone;
   Int32 nBhtab;
   UChar* eclass8 = (UChar*)eclass;

   /*--
      Initial 1-char radix sort to generate
      initial fmap and initial BH bits.
   --*/
   if (verb >= 4)
      VPrintf0 ( "        bucket sorting ...\n" );
   for (i = 0; i < 257;    i++) ftab[i] = 0;
   for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
   for (i = 0; i < 256;    i++) ftabCopy[i] = ftab[i];
   for (i = 1; i < 257;    i++) ftab[i] += ftab[i-1];

   for (i = 0; i < nblock; i++) {
      j = eclass8[i];
      k = ftab[j] - 1;
      ftab[j] = k;
      fmap[k] = i;
   }

   nBhtab = 2 + (nblock / 32);
   for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
   for (i = 0; i < 256; i++) SET_BH(ftab[i]);

   /*--
      Inductively refine the buckets.  Kind-of an
      "exponential radix sort" (!), inspired by the
      Manber-Myers suffix array construction algorithm.
   --*/

   /*-- set sentinel bits for block-end detection --*/
   for (i = 0; i < 32; i++) { 
      SET_BH(nblock + 2*i);
      CLEAR_BH(nblock + 2*i + 1);
   }

   /*-- the log(N) loop --*/
   H = 1;
   while (1) {

      if (verb >= 4) 
         VPrintf1 ( "        depth %6d has ", H );

      j = 0;
      for (i = 0; i < nblock; i++) {
         if (ISSET_BH(i)) j = i;
         k = fmap[i] - H; if (k < 0) k += nblock;
         eclass[k] = j;
      }

      nNotDone = 0;
      r = -1;
      while (1) {

	 /*-- find the next non-singleton bucket --*/
         k = r + 1;
         while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
         if (ISSET_BH(k)) {
            while (WORD_BH(k) == 0xffffffff) k += 32;
            while (ISSET_BH(k)) k++;
         }
         l = k - 1;
         if (l >= nblock) break;
         while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
         if (!ISSET_BH(k)) {
            while (WORD_BH(k) == 0x00000000) k += 32;
            while (!ISSET_BH(k)) k++;
         }
         r = k - 1;
         if (r >= nblock) break;

         /*-- now [l, r] bracket current bucket --*/
         if (r > l) {
            nNotDone += (r - l + 1);
            fallbackQSort3 ( fmap, eclass, l, r );

            /*-- scan bucket and generate header bits-- */
            cc = -1;
            for (i = l; i <= r; i++) {
               cc1 = eclass[fmap[i]];
               if (cc != cc1) { SET_BH(i); cc = cc1; };
            }
         }
      }

      if (verb >= 4) 
         VPrintf1 ( "%6d unresolved strings\n", nNotDone );

      H *= 2;
      if (H > nblock || nNotDone == 0) break;
   }

   /*-- 
      Reconstruct the original block in
      eclass8 [0 .. nblock-1], since the
      previous phase destroyed it.
   --*/
   if (verb >= 4)
      VPrintf0 ( "        reconstructing block ...\n" );
   j = 0;
   for (i = 0; i < nblock; i++) {
      while (ftabCopy[j] == 0) j++;
      ftabCopy[j]--;
      eclass8[fmap[i]] = (UChar)j;
   }
   AssertH ( j < 256, 1005 );
}

#undef       SET_BH
#undef     CLEAR_BH
#undef     ISSET_BH
#undef      WORD_BH
#undef UNALIGNED_BH


/*---------------------------------------------*/
/*--- The main, O(N^2 log(N)) sorting       ---*/
/*--- algorithm.  Faster for "normal"       ---*/
/*--- non-repetitive blocks.                ---*/
/*---------------------------------------------*/

/*---------------------------------------------*/
static
__inline__
Bool mainGtU ( UInt32  i1, 
               UInt32  i2,
               UChar*  block, 
               UInt16* quadrant,
               UInt32  nblock,
               Int32*  budget )
{
   Int32  k;
   UChar  c1, c2;
   UInt16 s1, s2;

   AssertD ( i1 != i2, "mainGtU" );
   /* 1 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 2 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 3 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 4 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 5 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 6 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 7 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 8 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 9 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 10 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 11 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;
   /* 12 */
   c1 = block[i1]; c2 = block[i2];
   if (c1 != c2) return (c1 > c2);
   i1++; i2++;

   k = nblock + 8;

   do {
      /* 1 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 2 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 3 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 4 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 5 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 6 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 7 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;
      /* 8 */
      c1 = block[i1]; c2 = block[i2];
      if (c1 != c2) return (c1 > c2);
      s1 = quadrant[i1]; s2 = quadrant[i2];
      if (s1 != s2) return (s1 > s2);
      i1++; i2++;

      if (i1 >= nblock) i1 -= nblock;
      if (i2 >= nblock) i2 -= nblock;

      k -= 8;
      (*budget)--;
   }
      while (k >= 0);

   return False;
}


/*---------------------------------------------*/
/*--
   Knuth's increments seem to work better
   than Incerpi-Sedgewick here.  Possibly
   because the number of elems to sort is
   usually small, typically <= 20.
--*/
static
Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
                   9841, 29524, 88573, 265720,
                   797161, 2391484 };

static
void mainSimpleSort ( UInt32* ptr,
                      UChar*  block,
                      UInt16* quadrant,
                      Int32   nblock,
                      Int32   lo, 
                      Int32   hi, 
                      Int32   d,
                      Int32*  budget )
{
   Int32 i, j, h, bigN, hp;
   UInt32 v;

   bigN = hi - lo + 1;
   if (bigN < 2) return;

   hp = 0;
   while (incs[hp] < bigN) hp++;
   hp--;

   for (; hp >= 0; hp--) {
      h = incs[hp];

      i = lo + h;
      while (True) {

         /*-- copy 1 --*/
         if (i > hi) break;
         v = ptr[i];
         j = i;
         while ( mainGtU ( 
                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
                 ) ) {
            ptr[j] = ptr[j-h];
            j = j - h;
            if (j <= (lo + h - 1)) break;
         }
         ptr[j] = v;
         i++;

         /*-- copy 2 --*/
         if (i > hi) break;
         v = ptr[i];
         j = i;
         while ( mainGtU ( 
                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
                 ) ) {
            ptr[j] = ptr[j-h];
            j = j - h;
            if (j <= (lo + h - 1)) break;
         }
         ptr[j] = v;
         i++;

         /*-- copy 3 --*/
         if (i > hi) break;
         v = ptr[i];
         j = i;
         while ( mainGtU ( 
                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
                 ) ) {
            ptr[j] = ptr[j-h];
            j = j - h;
            if (j <= (lo + h - 1)) break;
         }
         ptr[j] = v;
         i++;

         if (*budget < 0) return;
      }
   }
}


/*---------------------------------------------*/
/*--
   The following is an implementation of
   an elegant 3-way quicksort for strings,
   described in a paper "Fast Algorithms for
   Sorting and Searching Strings", by Robert
   Sedgewick and Jon L. Bentley.
--*/

#define mswap(zz1, zz2) \
   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }

#define mvswap(zzp1, zzp2, zzn)       \
{                                     \
   Int32 yyp1 = (zzp1);               \
   Int32 yyp2 = (zzp2);               \
   Int32 yyn  = (zzn);                \
   while (yyn > 0) {                  \
      mswap(ptr[yyp1], ptr[yyp2]);    \
      yyp1++; yyp2++; yyn--;          \
   }                                  \
}

static 
__inline__
UChar mmed3 ( UChar a, UChar b, UChar c )
{
   UChar t;
   if (a > b) { t = a; a = b; b = t; };
   if (b > c) { 
      b = c;
      if (a > b) b = a;
   }
   return b;
}

#define mmin(a,b) ((a) < (b)) ? (a) : (b)

#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
                          stackHi[sp] = hz; \
                          stackD [sp] = dz; \
                          sp++; }

#define mpop(lz,hz,dz) { sp--;             \
                         lz = stackLo[sp]; \
                         hz = stackHi[sp]; \
                         dz = stackD [sp]; }


#define mnextsize(az) (nextHi[az]-nextLo[az])

#define mnextswap(az,bz)                                        \
   { Int32 tz;                                                  \
     tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
     tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
     tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }


#define MAIN_QSORT_SMALL_THRESH 20
#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
#define MAIN_QSORT_STACK_SIZE 100

static
void mainQSort3 ( UInt32* ptr,
                  UChar*  block,
                  UInt16* quadrant,
                  Int32   nblock,
                  Int32   loSt, 
                  Int32   hiSt, 
                  Int32   dSt,
                  Int32*  budget )
{
   Int32 unLo, unHi, ltLo, gtHi, n, m, med;
   Int32 sp, lo, hi, d;

   Int32 stackLo[MAIN_QSORT_STACK_SIZE];
   Int32 stackHi[MAIN_QSORT_STACK_SIZE];
   Int32 stackD [MAIN_QSORT_STACK_SIZE];

   Int32 nextLo[3];
   Int32 nextHi[3];
   Int32 nextD [3];

   sp = 0;
   mpush ( loSt, hiSt, dSt );

   while (sp > 0) {

      AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );

      mpop ( lo, hi, d );
      if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
          d > MAIN_QSORT_DEPTH_THRESH) {
         mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
         if (*budget < 0) return;
         continue;
      }

      med = (Int32) 
            mmed3 ( block[ptr[ lo         ]+d],
                    block[ptr[ hi         ]+d],
                    block[ptr[ (lo+hi)>>1 ]+d] );

      unLo = ltLo = lo;
      unHi = gtHi = hi;

      while (True) {
         while (True) {
            if (unLo > unHi) break;
            n = ((Int32)block[ptr[unLo]+d]) - med;
            if (n == 0) { 
               mswap(ptr[unLo], ptr[ltLo]); 
               ltLo++; unLo++; continue; 
            };
            if (n >  0) break;
            unLo++;
         }
         while (True) {
            if (unLo > unHi) break;
            n = ((Int32)block[ptr[unHi]+d]) - med;
            if (n == 0) { 
               mswap(ptr[unHi], ptr[gtHi]); 
               gtHi--; unHi--; continue; 
            };
            if (n <  0) break;
            unHi--;
         }
         if (unLo > unHi) break;
         mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
      }

      AssertD ( unHi == unLo-1, "mainQSort3(2)" );

      if (gtHi < ltLo) {
         mpush(lo, hi, d+1 );
         continue;
      }

      n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
      m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);

      n = lo + unLo - ltLo - 1;
      m = hi - (gtHi - unHi) + 1;

      nextLo[0] = lo;  nextHi[0] = n;   nextD[0] = d;
      nextLo[1] = m;   nextHi[1] = hi;  nextD[1] = d;
      nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;

      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
      if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);

      AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
      AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );

      mpush (nextLo[0], nextHi[0], nextD[0]);
      mpush (nextLo[1], nextHi[1], nextD[1]);
      mpush (nextLo[2], nextHi[2], nextD[2]);
   }
}

#undef mswap
#undef mvswap
#undef mpush
#undef mpop
#undef mmin
#undef mnextsize
#undef mnextswap
#undef MAIN_QSORT_SMALL_THRESH
#undef MAIN_QSORT_DEPTH_THRESH
#undef MAIN_QSORT_STACK_SIZE


/*---------------------------------------------*/
/* Pre:
      nblock > N_OVERSHOOT
      block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
      ((UChar*)block32) [0 .. nblock-1] holds block
      ptr exists for [0 .. nblock-1]

   Post:
      ((UChar*)block32) [0 .. nblock-1] holds block
      All other areas of block32 destroyed
      ftab [0 .. 65536 ] destroyed
      ptr [0 .. nblock-1] holds sorted order
      if (*budget < 0), sorting was abandoned
*/

#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
#define SETMASK (1 << 21)
#define CLEARMASK (~(SETMASK))

static
void mainSort ( UInt32* ptr, 
                UChar*  block,
                UInt16* quadrant, 
                UInt32* ftab,
                Int32   nblock,
                Int32   verb,
                Int32*  budget )
{
   Int32  i, j, k, ss, sb;
   Int32  runningOrder[256];
   Bool   bigDone[256];
   Int32  copyStart[256];
   Int32  copyEnd  [256];
   UChar  c1;
   Int32  numQSorted;
   UInt16 s;
   if (verb >= 4) VPrintf0 ( "        main sort initialise ...\n" );

   /*-- set up the 2-byte frequency table --*/
   for (i = 65536; i >= 0; i--) ftab[i] = 0;

   j = block[0] << 8;
   i = nblock-1;
   for (; i >= 3; i -= 4) {
      quadrant[i] = 0;
      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
      ftab[j]++;
      quadrant[i-1] = 0;
      j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
      ftab[j]++;
      quadrant[i-2] = 0;
      j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
      ftab[j]++;
      quadrant[i-3] = 0;
      j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
      ftab[j]++;
   }
   for (; i >= 0; i--) {
      quadrant[i] = 0;
      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
      ftab[j]++;
   }

   /*-- (emphasises close relationship of block & quadrant) --*/
   for (i = 0; i < BZ_N_OVERSHOOT; i++) {
      block   [nblock+i] = block[i];
      quadrant[nblock+i] = 0;
   }

   if (verb >= 4) VPrintf0 ( "        bucket sorting ...\n" );

   /*-- Complete the initial radix sort --*/
   for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];

   s = block[0] << 8;
   i = nblock-1;
   for (; i >= 3; i -= 4) {
      s = (s >> 8) | (block[i] << 8);
      j = ftab[s] -1;
      ftab[s] = j;
      ptr[j] = i;
      s = (s >> 8) | (block[i-1] << 8);
      j = ftab[s] -1;
      ftab[s] = j;
      ptr[j] = i-1;
      s = (s >> 8) | (block[i-2] << 8);
      j = ftab[s] -1;
      ftab[s] = j;
      ptr[j] = i-2;
      s = (s >> 8) | (block[i-3] << 8);
      j = ftab[s] -1;
      ftab[s] = j;
      ptr[j] = i-3;
   }
   for (; i >= 0; i--) {
      s = (s >> 8) | (block[i] << 8);
      j = ftab[s] -1;
      ftab[s] = j;
      ptr[j] = i;
   }

   /*--
      Now ftab contains the first loc of every small bucket.
      Calculate the running order, from smallest to largest
      big bucket.
   --*/
   for (i = 0; i <= 255; i++) {
      bigDone     [i] = False;
      runningOrder[i] = i;
   }

   {
      Int32 vv;
      Int32 h = 1;
      do h = 3 * h + 1; while (h <= 256);
      do {
         h = h / 3;
         for (i = h; i <= 255; i++) {
            vv = runningOrder[i];
            j = i;
            while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
               runningOrder[j] = runningOrder[j-h];
               j = j - h;
               if (j <= (h - 1)) goto zero;
            }
            zero:
            runningOrder[j] = vv;
         }
      } while (h != 1);
   }

   /*--
      The main sorting loop.
   --*/

   numQSorted = 0;

   for (i = 0; i <= 255; i++) {

      /*--
         Process big buckets, starting with the least full.
         Basically this is a 3-step process in which we call
         mainQSort3 to sort the small buckets [ss, j], but
         also make a big effort to avoid the calls if we can.
      --*/
      ss = runningOrder[i];

      /*--
         Step 1:
         Complete the big bucket [ss] by quicksorting
         any unsorted small buckets [ss, j], for j != ss.  
         Hopefully previous pointer-scanning phases have already
         completed many of the small buckets [ss, j], so
         we don't have to sort them at all.
      --*/
      for (j = 0; j <= 255; j++) {
         if (j != ss) {
            sb = (ss << 8) + j;
            if ( ! (ftab[sb] & SETMASK) ) {
               Int32 lo = ftab[sb]   & CLEARMASK;
               Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
               if (hi > lo) {
                  if (verb >= 4)
                     VPrintf4 ( "        qsort [0x%x, 0x%x]   "
                                "done %d   this %d\n",
                                ss, j, numQSorted, hi - lo + 1 );
                  mainQSort3 ( 
                     ptr, block, quadrant, nblock, 
                     lo, hi, BZ_N_RADIX, budget 
                  );   
                  numQSorted += (hi - lo + 1);
                  if (*budget < 0) return;
               }
            }
            ftab[sb] |= SETMASK;
         }
      }

      AssertH ( !bigDone[ss], 1006 );

      /*--
         Step 2:
         Now scan this big bucket [ss] so as to synthesise the
         sorted order for small buckets [t, ss] for all t,
         including, magically, the bucket [ss,ss] too.
         This will avoid doing Real Work in subsequent Step 1's.
      --*/
      {
         for (j = 0; j <= 255; j++) {
            copyStart[j] =  ftab[(j << 8) + ss]     & CLEARMASK;
            copyEnd  [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
         }
         for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
            k = ptr[j]-1; if (k < 0) k += nblock;
            c1 = block[k];
            if (!bigDone[c1])
               ptr[ copyStart[c1]++ ] = k;
         }
         for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
            k = ptr[j]-1; if (k < 0) k += nblock;
            c1 = block[k];
            if (!bigDone[c1]) 
               ptr[ copyEnd[c1]-- ] = k;
         }
      }

      AssertH ( (copyStart[ss]-1 == copyEnd[ss])
                || 
                /* Extremely rare case missing in bzip2-1.0.0 and 1.0.1.
                   Necessity for this case is demonstrated by compressing 
                   a sequence of approximately 48.5 million of character 
                   251; 1.0.0/1.0.1 will then die here. */
                (copyStart[ss] == 0 && copyEnd[ss] == nblock-1),
                1007 )

      for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;

      /*--
         Step 3:
         The [ss] big bucket is now done.  Record this fact,
         and update the quadrant descriptors.  Remember to
         update quadrants in the overshoot area too, if
         necessary.  The "if (i < 255)" test merely skips
         this updating for the last bucket processed, since
         updating for the last bucket is pointless.

         The quadrant array provides a way to incrementally
         cache sort orderings, as they appear, so as to 
         make subsequent comparisons in fullGtU() complete
         faster.  For repetitive blocks this makes a big
         difference (but not big enough to be able to avoid
         the fallback sorting mechanism, exponential radix sort).

         The precise meaning is: at all times:

            for 0 <= i < nblock and 0 <= j <= nblock

            if block[i] != block[j], 

               then the relative values of quadrant[i] and 
                    quadrant[j] are meaningless.

               else {
                  if quadrant[i] < quadrant[j]
                     then the string starting at i lexicographically
                     precedes the string starting at j

                  else if quadrant[i] > quadrant[j]
                     then the string starting at j lexicographically
                     precedes the string starting at i

                  else
                     the relative ordering of the strings starting
                     at i and j has not yet been determined.
               }
      --*/
      bigDone[ss] = True;

      if (i < 255) {
         Int32 bbStart  = ftab[ss << 8] & CLEARMASK;
         Int32 bbSize   = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
         Int32 shifts   = 0;

         while ((bbSize >> shifts) > 65534) shifts++;

         for (j = bbSize-1; j >= 0; j--) {
            Int32 a2update     = ptr[bbStart + j];
            UInt16 qVal        = (UInt16)(j >> shifts);
            quadrant[a2update] = qVal;
            if (a2update < BZ_N_OVERSHOOT)
               quadrant[a2update + nblock] = qVal;
         }
         AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
      }

   }

   if (verb >= 4)
      VPrintf3 ( "        %d pointers, %d sorted, %d scanned\n",
                 nblock, numQSorted, nblock - numQSorted );
}

#undef BIGFREQ
#undef SETMASK
#undef CLEARMASK


/*---------------------------------------------*/
/* Pre:
      nblock > 0
      arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
      ((UChar*)arr2)  [0 .. nblock-1] holds block
      arr1 exists for [0 .. nblock-1]

   Post:
      ((UChar*)arr2) [0 .. nblock-1] holds block
      All other areas of block destroyed
      ftab [ 0 .. 65536 ] destroyed
      arr1 [0 .. nblock-1] holds sorted order
*/
void BZ2_blockSort ( EState* s )
{
   UInt32* ptr    = s->ptr; 
   UChar*  block  = s->block;
   UInt32* ftab   = s->ftab;
   Int32   nblock = s->nblock;
   Int32   verb   = s->verbosity;
   Int32   wfact  = s->workFactor;
   UInt16* quadrant;
   Int32   budget;
   Int32   budgetInit;
   Int32   i;

   if (nblock < /* 10000 */1000 ) {
      fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
   } else {
      /* Calculate the location for quadrant, remembering to get
         the alignment right.  Assumes that &(block[0]) is at least
         2-byte aligned -- this should be ok since block is really
         the first section of arr2.
      */
      i = nblock+BZ_N_OVERSHOOT;
      if (i & 1) i++;
      quadrant = (UInt16*)(&(block[i]));

      /* (wfact-1) / 3 puts the default-factor-30
         transition point at very roughly the same place as 
         with v0.1 and v0.9.0.  
         Not that it particularly matters any more, since the
         resulting compressed stream is now the same regardless
         of whether or not we use the main sort or fallback sort.
      */
      if (wfact < 1  ) wfact = 1;
      if (wfact > 100) wfact = 100;
      budgetInit = nblock * ((wfact-1) / 3);
      budget = budgetInit;

      mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
      if (0 && verb >= 3) 
         VPrintf3 ( "      %d work, %d block, ratio %5.2f\n",
                    budgetInit - budget,
                    nblock, 
                    (float)(budgetInit - budget) /
                    (float)(nblock==0 ? 1 : nblock) ); 
      if (budget < 0) {
         if (verb >= 2) 
            VPrintf0 ( "    too repetitive; using fallback"
                       " sorting algorithm\n" );
         fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
      }
   }

   s->origPtr = -1;
   for (i = 0; i < s->nblock; i++)
      if (ptr[i] == 0)
         { s->origPtr = i; break; };

   AssertH( s->origPtr != -1, 1003 );
}


/*-------------------------------------------------------------*/
/*--- end                                       blocksort.c ---*/
/*-------------------------------------------------------------*/

/*-------------------------------------------------------------*/
/*--- Huffman coding low-level stuff                        ---*/
/*---                                             huffman.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/



/*---------------------------------------------------*/
#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))

#define ADDWEIGHTS(zw1,zw2)                           \
   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))

#define UPHEAP(z)                                     \
{                                                     \
   Int32 zz, tmp;                                     \
   zz = z; tmp = heap[zz];                            \
   while (weight[tmp] < weight[heap[zz >> 1]]) {      \
      heap[zz] = heap[zz >> 1];                       \
      zz >>= 1;                                       \
   }                                                  \
   heap[zz] = tmp;                                    \
}

#define DOWNHEAP(z)                                   \
{                                                     \
   Int32 zz, yy, tmp;                                 \
   zz = z; tmp = heap[zz];                            \
   while (True) {                                     \
      yy = zz << 1;                                   \
      if (yy > nHeap) break;                          \
      if (yy < nHeap &&                               \
          weight[heap[yy+1]] < weight[heap[yy]])      \
         yy++;                                        \
      if (weight[tmp] < weight[heap[yy]]) break;      \
      heap[zz] = heap[yy];                            \
      zz = yy;                                        \
   }                                                  \
   heap[zz] = tmp;                                    \
}


/*---------------------------------------------------*/
void BZ2_hbMakeCodeLengths ( UChar *len, 
                             Int32 *freq,
                             Int32 alphaSize,
                             Int32 maxLen )
{
   /*--
      Nodes and heap entries run from 1.  Entry 0
      for both the heap and nodes is a sentinel.
   --*/
   Int32 nNodes, nHeap, n1, n2, i, j, k;
   Bool  tooLong;

   Int32 heap   [ BZ_MAX_ALPHA_SIZE + 2 ];
   Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
   Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; 

   for (i = 0; i < alphaSize; i++)
      weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;

   while (True) {

      nNodes = alphaSize;
      nHeap = 0;

      heap[0] = 0;
      weight[0] = 0;
      parent[0] = -2;

      for (i = 1; i <= alphaSize; i++) {
         parent[i] = -1;
         nHeap++;
         heap[nHeap] = i;
         UPHEAP(nHeap);
      }

      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
   
      while (nHeap > 1) {
         n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
         n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
         nNodes++;
         parent[n1] = parent[n2] = nNodes;
         weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
         parent[nNodes] = -1;
         nHeap++;
         heap[nHeap] = nNodes;
         UPHEAP(nHeap);
      }

      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );

      tooLong = False;
      for (i = 1; i <= alphaSize; i++) {
         j = 0;
         k = i;
         while (parent[k] >= 0) { k = parent[k]; j++; }
         len[i-1] = j;
         if (j > maxLen) tooLong = True;
      }
      
      if (! tooLong) break;

      /* 17 Oct 04: keep-going condition for the following loop used
         to be 'i < alphaSize', which missed the last element,
         theoretically leading to the possibility of the compressor
         looping.  However, this count-scaling step is only needed if
         one of the generated Huffman code words is longer than
         maxLen, which up to and including version 1.0.2 was 20 bits,
         which is extremely unlikely.  In version 1.0.3 maxLen was
         changed to 17 bits, which has minimal effect on compression
         ratio, but does mean this scaling step is used from time to
         time, enough to verify that it works.

         This means that bzip2-1.0.3 and later will only produce
         Huffman codes with a maximum length of 17 bits.  However, in
         order to preserve backwards compatibility with bitstreams
         produced by versions pre-1.0.3, the decompressor must still
         handle lengths of up to 20. */

      for (i = 1; i <= alphaSize; i++) {
         j = weight[i] >> 8;
         j = 1 + (j / 2);
         weight[i] = j << 8;
      }
   }
}


/*---------------------------------------------------*/
void BZ2_hbAssignCodes ( Int32 *code,
                         UChar *length,
                         Int32 minLen,
                         Int32 maxLen,
                         Int32 alphaSize )
{
   Int32 n, vec, i;

   vec = 0;
   for (n = minLen; n <= maxLen; n++) {
      for (i = 0; i < alphaSize; i++)
         if (length[i] == n) { code[i] = vec; vec++; };
      vec <<= 1;
   }
}


/*---------------------------------------------------*/
void BZ2_hbCreateDecodeTables ( Int32 *limit,
                                Int32 *base,
                                Int32 *perm,
                                UChar *length,
                                Int32 minLen,
                                Int32 maxLen,
                                Int32 alphaSize )
{
   Int32 pp, i, j, vec;

   pp = 0;
   for (i = minLen; i <= maxLen; i++)
      for (j = 0; j < alphaSize; j++)
         if (length[j] == i) { perm[pp] = j; pp++; };

   for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;

   for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];

   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
   vec = 0;

   for (i = minLen; i <= maxLen; i++) {
      vec += (base[i+1] - base[i]);
      limit[i] = vec-1;
      vec <<= 1;
   }
   for (i = minLen + 1; i <= maxLen; i++)
      base[i] = ((limit[i-1] + 1) << 1) - base[i];
}


/*-------------------------------------------------------------*/
/*--- end                                         huffman.c ---*/
/*-------------------------------------------------------------*/

/*-------------------------------------------------------------*/
/*--- Compression machinery (not incl block sorting)        ---*/
/*---                                            compress.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/

/*--
   CHANGES
   ~~~~~~~
   0.9.0 -- original version.

   0.9.0a/b -- no changes in this file.

   0.9.0c
      * changed setting of nGroups in sendMTFValues() so as to 
        do a bit better on small files
--*/



/*---------------------------------------------------*/
/*--- Bit stream I/O                              ---*/
/*---------------------------------------------------*/

/*---------------------------------------------------*/
void BZ2_bsInitWrite ( EState* s )
{
   s->bsLive = 0;
   s->bsBuff = 0;
}


/*---------------------------------------------------*/
static
void bsFinishWrite ( EState* s )
{
   while (s->bsLive > 0) {
      s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24);
      s->numZ++;
      s->bsBuff <<= 8;
      s->bsLive -= 8;
   }
}


/*---------------------------------------------------*/
#define bsNEEDW(nz)                           \
{                                             \
   while (s->bsLive >= 8) {                   \
      s->zbits[s->numZ]                       \
         = (UChar)(s->bsBuff >> 24);          \
      s->numZ++;                              \
      s->bsBuff <<= 8;                        \
      s->bsLive -= 8;                         \
   }                                          \
}


/*---------------------------------------------------*/
static
__inline__
void bsW ( EState* s, Int32 n, UInt32 v )
{
   bsNEEDW ( n );
   s->bsBuff |= (v << (32 - s->bsLive - n));
   s->bsLive += n;
}


/*---------------------------------------------------*/
static
void bsPutUInt32 ( EState* s, UInt32 u )
{
   bsW ( s, 8, (u >> 24) & 0xffL );
   bsW ( s, 8, (u >> 16) & 0xffL );
   bsW ( s, 8, (u >>  8) & 0xffL );
   bsW ( s, 8,  u        & 0xffL );
}


/*---------------------------------------------------*/
static
void bsPutUChar ( EState* s, UChar c )
{
   bsW( s, 8, (UInt32)c );
}


/*---------------------------------------------------*/
/*--- The back end proper                         ---*/
/*---------------------------------------------------*/

/*---------------------------------------------------*/
static
void makeMaps_e ( EState* s )
{
   Int32 i;
   s->nInUse = 0;
   for (i = 0; i < 256; i++)
      if (s->inUse[i]) {
         s->unseqToSeq[i] = s->nInUse;
         s->nInUse++;
      }
}


/*---------------------------------------------------*/
static
void generateMTFValues ( EState* s )
{
   UChar   yy[256];
   Int32   i, j;
   Int32   zPend;
   Int32   wr;
   Int32   EOB;

   /* 
      After sorting (eg, here),
         s->arr1 [ 0 .. s->nblock-1 ] holds sorted order,
         and
         ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] 
         holds the original block data.

      The first thing to do is generate the MTF values,
      and put them in
         ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ].
      Because there are strictly fewer or equal MTF values
      than block values, ptr values in this area are overwritten
      with MTF values only when they are no longer needed.

      The final compressed bitstream is generated into the
      area starting at
         (UChar*) (&((UChar*)s->arr2)[s->nblock])

      These storage aliases are set up in bzCompressInit(),
      except for the last one, which is arranged in 
      compressBlock().
   */
   UInt32* ptr   = s->ptr;
   UChar* block  = s->block;
   UInt16* mtfv  = s->mtfv;

   makeMaps_e ( s );
   EOB = s->nInUse+1;

   for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0;

   wr = 0;
   zPend = 0;
   for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i;

   for (i = 0; i < s->nblock; i++) {
      UChar ll_i;
      AssertD ( wr <= i, "generateMTFValues(1)" );
      j = ptr[i]-1; if (j < 0) j += s->nblock;
      ll_i = s->unseqToSeq[block[j]];
      AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );

      if (yy[0] == ll_i) { 
         zPend++;
      } else {

         if (zPend > 0) {
            zPend--;
            while (True) {
               if (zPend & 1) {
                  mtfv[wr] = BZ_RUNB; wr++; 
                  s->mtfFreq[BZ_RUNB]++; 
               } else {
                  mtfv[wr] = BZ_RUNA; wr++; 
                  s->mtfFreq[BZ_RUNA]++; 
               }
               if (zPend < 2) break;
               zPend = (zPend - 2) / 2;
            };
            zPend = 0;
         }
         {
            register UChar  rtmp;
            register UChar* ryy_j;
            register UChar  rll_i;
            rtmp  = yy[1];
            yy[1] = yy[0];
            ryy_j = &(yy[1]);
            rll_i = ll_i;
            while ( rll_i != rtmp ) {
               register UChar rtmp2;
               ryy_j++;
               rtmp2  = rtmp;
               rtmp   = *ryy_j;
               *ryy_j = rtmp2;
            };
            yy[0] = rtmp;
            j = ryy_j - &(yy[0]);
            mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++;
         }

      }
   }

   if (zPend > 0) {
      zPend--;
      while (True) {
         if (zPend & 1) {
            mtfv[wr] = BZ_RUNB; wr++; 
            s->mtfFreq[BZ_RUNB]++; 
         } else {
            mtfv[wr] = BZ_RUNA; wr++; 
            s->mtfFreq[BZ_RUNA]++; 
         }
         if (zPend < 2) break;
         zPend = (zPend - 2) / 2;
      };
      zPend = 0;
   }

   mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++;

   s->nMTF = wr;
}


/*---------------------------------------------------*/
#define BZ_LESSER_ICOST  0
#define BZ_GREATER_ICOST 15

static
void sendMTFValues ( EState* s )
{
   Int32 v, t, i, j, gs, ge, totc, bt, bc, iter;
   Int32 nSelectors, alphaSize, minLen, maxLen, selCtr;
   Int32 nGroups, nBytes;

   /*--
   UChar  len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
   is a global since the decoder also needs it.

   Int32  code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
   Int32  rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
   are also globals only used in this proc.
   Made global to keep stack frame size small.
   --*/


   UInt16 cost[BZ_N_GROUPS];
   Int32  fave[BZ_N_GROUPS];

   UInt16* mtfv = s->mtfv;

   if (s->verbosity >= 3)
      VPrintf3( "      %d in block, %d after MTF & 1-2 coding, "
                "%d+2 syms in use\n", 
                s->nblock, s->nMTF, s->nInUse );

   alphaSize = s->nInUse+2;
   for (t = 0; t < BZ_N_GROUPS; t++)
      for (v = 0; v < alphaSize; v++)
         s->len[t][v] = BZ_GREATER_ICOST;

   /*--- Decide how many coding tables to use ---*/
   AssertH ( s->nMTF > 0, 3001 );
   if (s->nMTF < 200)  nGroups = 2; else
   if (s->nMTF < 600)  nGroups = 3; else
   if (s->nMTF < 1200) nGroups = 4; else
   if (s->nMTF < 2400) nGroups = 5; else
                       nGroups = 6;

   /*--- Generate an initial set of coding tables ---*/
   { 
      Int32 nPart, remF, tFreq, aFreq;

      nPart = nGroups;
      remF  = s->nMTF;
      gs = 0;
      while (nPart > 0) {
         tFreq = remF / nPart;
         ge = gs-1;
         aFreq = 0;
         while (aFreq < tFreq && ge < alphaSize-1) {
            ge++;
            aFreq += s->mtfFreq[ge];
         }

         if (ge > gs 
             && nPart != nGroups && nPart != 1 
             && ((nGroups-nPart) % 2 == 1)) {
            aFreq -= s->mtfFreq[ge];
            ge--;
         }

         if (0 && s->verbosity >= 3)
            VPrintf5( "      initial group %d, [%d .. %d], "
                      "has %d syms (%4.1f%%)\n",
                      nPart, gs, ge, aFreq, 
                      (100.0 * (float)aFreq) / (float)(s->nMTF) );
 
         for (v = 0; v < alphaSize; v++)
            if (v >= gs && v <= ge) 
               s->len[nPart-1][v] = BZ_LESSER_ICOST; else
               s->len[nPart-1][v] = BZ_GREATER_ICOST;
 
         nPart--;
         gs = ge+1;
         remF -= aFreq;
      }
   }

   /*--- 
      Iterate up to BZ_N_ITERS times to improve the tables.
   ---*/
   for (iter = 0; iter < BZ_N_ITERS; iter++) {

      for (t = 0; t < nGroups; t++) fave[t] = 0;

      for (t = 0; t < nGroups; t++)
         for (v = 0; v < alphaSize; v++)
            s->rfreq[t][v] = 0;

      /*---
        Set up an auxiliary length table which is used to fast-track
	the common case (nGroups == 6). 
      ---*/
      if (nGroups == 6) {
         for (v = 0; v < alphaSize; v++) {
            s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
            s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
            s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
	 }
      }

      nSelectors = 0;
      totc = 0;
      gs = 0;
      while (True) {

         /*--- Set group start & end marks. --*/
         if (gs >= s->nMTF) break;
         ge = gs + BZ_G_SIZE - 1; 
         if (ge >= s->nMTF) ge = s->nMTF-1;

         /*-- 
            Calculate the cost of this group as coded
            by each of the coding tables.
         --*/
         for (t = 0; t < nGroups; t++) cost[t] = 0;

         if (nGroups == 6 && 50 == ge-gs+1) {
            /*--- fast track the common case ---*/
            register UInt32 cost01, cost23, cost45;
            register UInt16 icv;
            cost01 = cost23 = cost45 = 0;

#           define BZ_ITER(nn)                \
               icv = mtfv[gs+(nn)];           \
               cost01 += s->len_pack[icv][0]; \
               cost23 += s->len_pack[icv][1]; \
               cost45 += s->len_pack[icv][2]; \

            BZ_ITER(0);  BZ_ITER(1);  BZ_ITER(2);  BZ_ITER(3);  BZ_ITER(4);
            BZ_ITER(5);  BZ_ITER(6);  BZ_ITER(7);  BZ_ITER(8);  BZ_ITER(9);
            BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
            BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
            BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
            BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
            BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
            BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
            BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
            BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);

#           undef BZ_ITER

            cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
            cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
            cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;

         } else {
	    /*--- slow version which correctly handles all situations ---*/
            for (i = gs; i <= ge; i++) { 
               UInt16 icv = mtfv[i];
               for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv];
            }
         }
 
         /*-- 
            Find the coding table which is best for this group,
            and record its identity in the selector table.
         --*/
         bc = 999999999; bt = -1;
         for (t = 0; t < nGroups; t++)
            if (cost[t] < bc) { bc = cost[t]; bt = t; };
         totc += bc;
         fave[bt]++;
         s->selector[nSelectors] = bt;
         nSelectors++;

         /*-- 
            Increment the symbol frequencies for the selected table.
          --*/
         if (nGroups == 6 && 50 == ge-gs+1) {
            /*--- fast track the common case ---*/

#           define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++

            BZ_ITUR(0);  BZ_ITUR(1);  BZ_ITUR(2);  BZ_ITUR(3);  BZ_ITUR(4);
            BZ_ITUR(5);  BZ_ITUR(6);  BZ_ITUR(7);  BZ_ITUR(8);  BZ_ITUR(9);
            BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
            BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
            BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
            BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
            BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
            BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
            BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
            BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);

#           undef BZ_ITUR

         } else {
	    /*--- slow version which correctly handles all situations ---*/
            for (i = gs; i <= ge; i++)
               s->rfreq[bt][ mtfv[i] ]++;
         }

         gs = ge+1;
      }
      if (s->verbosity >= 3) {
         VPrintf2 ( "      pass %d: size is %d, grp uses are ", 
                   iter+1, totc/8 );
         for (t = 0; t < nGroups; t++)
            VPrintf1 ( "%d ", fave[t] );
         VPrintf0 ( "\n" );
      }

      /*--
        Recompute the tables based on the accumulated frequencies.
      --*/
      /* maxLen was changed from 20 to 17 in bzip2-1.0.3.  See 
         comment in huffman.c for details. */
      for (t = 0; t < nGroups; t++)
         BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), 
                                 alphaSize, 17 /*20*/ );
   }


   AssertH( nGroups < 8, 3002 );
   AssertH( nSelectors < 32768 &&
            nSelectors <= (2 + (900000 / BZ_G_SIZE)),
            3003 );


   /*--- Compute MTF values for the selectors. ---*/
   {
      UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
      for (i = 0; i < nGroups; i++) pos[i] = i;
      for (i = 0; i < nSelectors; i++) {
         ll_i = s->selector[i];
         j = 0;
         tmp = pos[j];
         while ( ll_i != tmp ) {
            j++;
            tmp2 = tmp;
            tmp = pos[j];
            pos[j] = tmp2;
         };
         pos[0] = tmp;
         s->selectorMtf[i] = j;
      }
   };

   /*--- Assign actual codes for the tables. --*/
   for (t = 0; t < nGroups; t++) {
      minLen = 32;
      maxLen = 0;
      for (i = 0; i < alphaSize; i++) {
         if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
         if (s->len[t][i] < minLen) minLen = s->len[t][i];
      }
      AssertH ( !(maxLen > 17 /*20*/ ), 3004 );
      AssertH ( !(minLen < 1),  3005 );
      BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), 
                          minLen, maxLen, alphaSize );
   }

   /*--- Transmit the mapping table. ---*/
   { 
      Bool inUse16[16];
      for (i = 0; i < 16; i++) {
          inUse16[i] = False;
          for (j = 0; j < 16; j++)
             if (s->inUse[i * 16 + j]) inUse16[i] = True;
      }
     
      nBytes = s->numZ;
      for (i = 0; i < 16; i++)
         if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0);

      for (i = 0; i < 16; i++)
         if (inUse16[i])
            for (j = 0; j < 16; j++) {
               if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0);
            }

      if (s->verbosity >= 3) 
         VPrintf1( "      bytes: mapping %d, ", s->numZ-nBytes );
   }

   /*--- Now the selectors. ---*/
   nBytes = s->numZ;
   bsW ( s, 3, nGroups );
   bsW ( s, 15, nSelectors );
   for (i = 0; i < nSelectors; i++) { 
      for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1);
      bsW(s,1,0);
   }
   if (s->verbosity >= 3)
      VPrintf1( "selectors %d, ", s->numZ-nBytes );

   /*--- Now the coding tables. ---*/
   nBytes = s->numZ;

   for (t = 0; t < nGroups; t++) {
      Int32 curr = s->len[t][0];
      bsW ( s, 5, curr );
      for (i = 0; i < alphaSize; i++) {
         while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ };
         while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ };
         bsW ( s, 1, 0 );
      }
   }

   if (s->verbosity >= 3)
      VPrintf1 ( "code lengths %d, ", s->numZ-nBytes );

   /*--- And finally, the block data proper ---*/
   nBytes = s->numZ;
   selCtr = 0;
   gs = 0;
   while (True) {
      if (gs >= s->nMTF) break;
      ge = gs + BZ_G_SIZE - 1; 
      if (ge >= s->nMTF) ge = s->nMTF-1;
      AssertH ( s->selector[selCtr] < nGroups, 3006 );

      if (nGroups == 6 && 50 == ge-gs+1) {
            /*--- fast track the common case ---*/
            UInt16 mtfv_i;
            UChar* s_len_sel_selCtr 
               = &(s->len[s->selector[selCtr]][0]);
            Int32* s_code_sel_selCtr
               = &(s->code[s->selector[selCtr]][0]);

#           define BZ_ITAH(nn)                      \
               mtfv_i = mtfv[gs+(nn)];              \
               bsW ( s,                             \
                     s_len_sel_selCtr[mtfv_i],      \
                     s_code_sel_selCtr[mtfv_i] )

            BZ_ITAH(0);  BZ_ITAH(1);  BZ_ITAH(2);  BZ_ITAH(3);  BZ_ITAH(4);
            BZ_ITAH(5);  BZ_ITAH(6);  BZ_ITAH(7);  BZ_ITAH(8);  BZ_ITAH(9);
            BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
            BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
            BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
            BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
            BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
            BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
            BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
            BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);

#           undef BZ_ITAH

      } else {
	 /*--- slow version which correctly handles all situations ---*/
         for (i = gs; i <= ge; i++) {
            bsW ( s, 
                  s->len  [s->selector[selCtr]] [mtfv[i]],
                  s->code [s->selector[selCtr]] [mtfv[i]] );
         }
      }


      gs = ge+1;
      selCtr++;
   }
   AssertH( selCtr == nSelectors, 3007 );

   if (s->verbosity >= 3)
      VPrintf1( "codes %d\n", s->numZ-nBytes );
}


/*---------------------------------------------------*/
void BZ2_compressBlock ( EState* s, Bool is_last_block )
{
   if (s->nblock > 0) {

      BZ_FINALISE_CRC ( s->blockCRC );
      s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
      s->combinedCRC ^= s->blockCRC;
      if (s->blockNo > 1) s->numZ = 0;

      if (s->verbosity >= 2)
         VPrintf4( "    block %d: crc = 0x%08x, "
                   "combined CRC = 0x%08x, size = %d\n",
                   s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );

      BZ2_blockSort ( s );
   }

   s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]);

   /*-- If this is the first block, create the stream header. --*/
   if (s->blockNo == 1) {
      BZ2_bsInitWrite ( s );
      bsPutUChar ( s, BZ_HDR_B );
      bsPutUChar ( s, BZ_HDR_Z );
      bsPutUChar ( s, BZ_HDR_h );
      bsPutUChar ( s, (UChar)(BZ_HDR_0 + s->blockSize100k) );
   }

   if (s->nblock > 0) {

      bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 );
      bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 );
      bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 );

      /*-- Now the block's CRC, so it is in a known place. --*/
      bsPutUInt32 ( s, s->blockCRC );

      /*-- 
         Now a single bit indicating (non-)randomisation. 
         As of version 0.9.5, we use a better sorting algorithm
         which makes randomisation unnecessary.  So always set
         the randomised bit to 'no'.  Of course, the decoder
         still needs to be able to handle randomised blocks
         so as to maintain backwards compatibility with
         older versions of bzip2.
      --*/
      bsW(s,1,0);

      bsW ( s, 24, s->origPtr );
      generateMTFValues ( s );
      sendMTFValues ( s );
   }


   /*-- If this is the last block, add the stream trailer. --*/
   if (is_last_block) {

      bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 );
      bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 );
      bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
      bsPutUInt32 ( s, s->combinedCRC );
      if (s->verbosity >= 2)
         VPrintf1( "    final combined CRC = 0x%08x\n   ", s->combinedCRC );
      bsFinishWrite ( s );
   }
}


/*-------------------------------------------------------------*/
/*--- end                                        compress.c ---*/
/*-------------------------------------------------------------*/


/*-------------------------------------------------------------*/
/*--- Table for randomising repetitive blocks               ---*/
/*---                                           randtable.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/




/*---------------------------------------------*/
Int32 BZ2_rNums[512] = { 
   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
   936, 638
};


/*-------------------------------------------------------------*/
/*--- end                                       randtable.c ---*/
/*-------------------------------------------------------------*/

/*-------------------------------------------------------------*/
/*--- Table for doing CRCs                                  ---*/
/*---                                            crctable.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/





/*--
  I think this is an implementation of the AUTODIN-II,
  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
  from code by Rob Warnock, in Section 51 of the
  comp.compression FAQ.
--*/

UInt32 BZ2_crc32Table[256] = {

   /*-- Ugly, innit? --*/

   0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
   0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
   0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
   0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
   0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
   0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
   0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
   0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
   0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
   0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
   0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
   0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
   0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
   0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
   0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
   0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
   0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
   0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
   0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
   0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
   0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
   0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
   0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
   0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
   0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
   0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
   0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
   0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
   0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
   0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
   0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
   0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
   0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
   0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
   0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
   0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
   0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
   0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
   0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
   0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
   0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
   0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
   0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
   0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
   0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
   0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
   0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
   0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
   0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
   0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
   0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
   0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
   0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
   0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
   0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
   0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
   0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
   0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
   0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
   0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
   0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
   0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
   0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
   0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
};


/*-------------------------------------------------------------*/
/*--- end                                        crctable.c ---*/
/*-------------------------------------------------------------*/

/*-------------------------------------------------------------*/
/*--- Library top-level functions.                          ---*/
/*---                                               bzlib.c ---*/
/*-------------------------------------------------------------*/

/*--
  This file is a part of bzip2 and/or libbzip2, a program and
  library for lossless, block-sorting data compression.

  Copyright (C) 1996-2004 Julian R Seward.  All rights reserved.

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
  are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

  2. The origin of this software must not be misrepresented; you must 
     not claim that you wrote the original software.  If you use this 
     software in a product, an acknowledgment in the product 
     documentation would be appreciated but is not required.

  3. Altered source versions must be plainly marked as such, and must
     not be misrepresented as being the original software.

  4. The name of the author may not be used to endorse or promote 
     products derived from this software without specific prior written 
     permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  Julian Seward, Cambridge, UK.
  jseward@bzip.org
  bzip2/libbzip2 version 1.0 of 21 March 2000

  This program is based on (at least) the work of:
     Mike Burrows
     David Wheeler
     Peter Fenwick
     Alistair Moffat
     Radford Neal
     Ian H. Witten
     Robert Sedgewick
     Jon L. Bentley

  For more information on these sources, see the manual.
--*/

/*--
   CHANGES
   ~~~~~~~
   0.9.0 -- original version.

   0.9.0a/b -- no changes in this file.

   0.9.0c
      * made zero-length BZ_FLUSH work correctly in bzCompress().
      * fixed bzWrite/bzRead to ignore zero-length requests.
      * fixed bzread to correctly handle read requests after EOF.
      * wrong parameter order in call to bzDecompressInit in
        bzBuffToBuffDecompress.  Fixed.
--*/



/*---------------------------------------------------*/
/*--- Compression stuff                           ---*/
/*---------------------------------------------------*/


/*---------------------------------------------------*/
void BZ2_bz__AssertH__fail ( int errcode )
{
   vex_printf("BZ2_bz__AssertH__fail(%d) called, exiting\n", errcode);
   (*serviceFn)(0,0);
}

void bz_internal_error ( int errcode )
{
   vex_printf("bz_internal_error called, exiting\n", errcode);
   (*serviceFn)(0,0);
}

/*---------------------------------------------------*/
static
int bz_config_ok ( void )
{
   if (sizeof(int)   != 4) return 0;
   if (sizeof(short) != 2) return 0;
   if (sizeof(char)  != 1) return 0;
   return 1;
}


/*---------------------------------------------------*/
static
void* default_bzalloc ( void* opaque, Int32 items, Int32 size )
{
   void* v = (void*) (*serviceFn)(2, items * size );
   return v;
}

static
void default_bzfree ( void* opaque, void* addr )
{
   if (addr != NULL) (*serviceFn)( 3, (HWord)addr );
}


/*---------------------------------------------------*/
static
void prepare_new_block ( EState* s )
{
   Int32 i;
   s->nblock = 0;
   s->numZ = 0;
   s->state_out_pos = 0;
   BZ_INITIALISE_CRC ( s->blockCRC );
   for (i = 0; i < 256; i++) s->inUse[i] = False;
   s->blockNo++;
}


/*---------------------------------------------------*/
static
void init_RL ( EState* s )
{
   s->state_in_ch  = 256;
   s->state_in_len = 0;
}


static
Bool isempty_RL ( EState* s )
{
   if (s->state_in_ch < 256 && s->state_in_len > 0)
      return False; else
      return True;
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzCompressInit) 
                    ( bz_stream* strm, 
                     int        blockSize100k,
                     int        verbosity,
                     int        workFactor )
{
   Int32   n;
   EState* s;

   if (!bz_config_ok()) return BZ_CONFIG_ERROR;

   if (strm == NULL || 
       blockSize100k < 1 || blockSize100k > 9 ||
       workFactor < 0 || workFactor > 250)
     return BZ_PARAM_ERROR;

   if (workFactor == 0) workFactor = 30;
   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;

   s = BZALLOC( sizeof(EState) );
   if (s == NULL) return BZ_MEM_ERROR;
   s->strm = strm;

   s->arr1 = NULL;
   s->arr2 = NULL;
   s->ftab = NULL;

   n       = 100000 * blockSize100k;
   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );

   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
      if (s->arr1 != NULL) BZFREE(s->arr1);
      if (s->arr2 != NULL) BZFREE(s->arr2);
      if (s->ftab != NULL) BZFREE(s->ftab);
      if (s       != NULL) BZFREE(s);
      return BZ_MEM_ERROR;
   }

   s->blockNo           = 0;
   s->state             = BZ_S_INPUT;
   s->mode              = BZ_M_RUNNING;
   s->combinedCRC       = 0;
   s->blockSize100k     = blockSize100k;
   s->nblockMAX         = 100000 * blockSize100k - 19;
   s->verbosity         = verbosity;
   s->workFactor        = workFactor;

   s->block             = (UChar*)s->arr2;
   s->mtfv              = (UInt16*)s->arr1;
   s->zbits             = NULL;
   s->ptr               = (UInt32*)s->arr1;

   strm->state          = s;
   strm->total_in_lo32  = 0;
   strm->total_in_hi32  = 0;
   strm->total_out_lo32 = 0;
   strm->total_out_hi32 = 0;
   init_RL ( s );
   prepare_new_block ( s );
   return BZ_OK;
}


/*---------------------------------------------------*/
static
void add_pair_to_block ( EState* s )
{
   Int32 i;
   UChar ch = (UChar)(s->state_in_ch);
   for (i = 0; i < s->state_in_len; i++) {
      BZ_UPDATE_CRC( s->blockCRC, ch );
   }
   s->inUse[s->state_in_ch] = True;
   switch (s->state_in_len) {
      case 1:
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         break;
      case 2:
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         break;
      case 3:
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         break;
      default:
         s->inUse[s->state_in_len-4] = True;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = (UChar)ch; s->nblock++;
         s->block[s->nblock] = ((UChar)(s->state_in_len-4));
         s->nblock++;
         break;
   }
}


/*---------------------------------------------------*/
static
void flush_RL ( EState* s )
{
   if (s->state_in_ch < 256) add_pair_to_block ( s );
   init_RL ( s );
}


/*---------------------------------------------------*/
#define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
{                                                 \
   UInt32 zchh = (UInt32)(zchh0);                 \
   /*-- fast track the common case --*/           \
   if (zchh != zs->state_in_ch &&                 \
       zs->state_in_len == 1) {                   \
      UChar ch = (UChar)(zs->state_in_ch);        \
      BZ_UPDATE_CRC( zs->blockCRC, ch );          \
      zs->inUse[zs->state_in_ch] = True;          \
      zs->block[zs->nblock] = (UChar)ch;          \
      zs->nblock++;                               \
      zs->state_in_ch = zchh;                     \
   }                                              \
   else                                           \
   /*-- general, uncommon cases --*/              \
   if (zchh != zs->state_in_ch ||                 \
      zs->state_in_len == 255) {                  \
      if (zs->state_in_ch < 256)                  \
         add_pair_to_block ( zs );                \
      zs->state_in_ch = zchh;                     \
      zs->state_in_len = 1;                       \
   } else {                                       \
      zs->state_in_len++;                         \
   }                                              \
}


/*---------------------------------------------------*/
static
Bool copy_input_until_stop ( EState* s )
{
   Bool progress_in = False;

   if (s->mode == BZ_M_RUNNING) {

      /*-- fast track the common case --*/
      while (True) {
         /*-- block full? --*/
         if (s->nblock >= s->nblockMAX) break;
         /*-- no input? --*/
         if (s->strm->avail_in == 0) break;
         progress_in = True;
         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
         s->strm->next_in++;
         s->strm->avail_in--;
         s->strm->total_in_lo32++;
         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
      }

   } else {

      /*-- general, uncommon case --*/
      while (True) {
         /*-- block full? --*/
         if (s->nblock >= s->nblockMAX) break;
         /*-- no input? --*/
         if (s->strm->avail_in == 0) break;
         /*-- flush/finish end? --*/
         if (s->avail_in_expect == 0) break;
         progress_in = True;
         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
         s->strm->next_in++;
         s->strm->avail_in--;
         s->strm->total_in_lo32++;
         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
         s->avail_in_expect--;
      }
   }
   return progress_in;
}


/*---------------------------------------------------*/
static
Bool copy_output_until_stop ( EState* s )
{
   Bool progress_out = False;

   while (True) {

      /*-- no output space? --*/
      if (s->strm->avail_out == 0) break;

      /*-- block done? --*/
      if (s->state_out_pos >= s->numZ) break;

      progress_out = True;
      *(s->strm->next_out) = s->zbits[s->state_out_pos];
      s->state_out_pos++;
      s->strm->avail_out--;
      s->strm->next_out++;
      s->strm->total_out_lo32++;
      if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
   }

   return progress_out;
}


/*---------------------------------------------------*/
static
Bool handle_compress ( bz_stream* strm )
{
   Bool progress_in  = False;
   Bool progress_out = False;
   EState* s = strm->state;
   
   while (True) {

      if (s->state == BZ_S_OUTPUT) {
         progress_out |= copy_output_until_stop ( s );
         if (s->state_out_pos < s->numZ) break;
         if (s->mode == BZ_M_FINISHING && 
             s->avail_in_expect == 0 &&
             isempty_RL(s)) break;
         prepare_new_block ( s );
         s->state = BZ_S_INPUT;
         if (s->mode == BZ_M_FLUSHING && 
             s->avail_in_expect == 0 &&
             isempty_RL(s)) break;
      }

      if (s->state == BZ_S_INPUT) {
         progress_in |= copy_input_until_stop ( s );
         if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
            flush_RL ( s );
            BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
            s->state = BZ_S_OUTPUT;
         }
         else
         if (s->nblock >= s->nblockMAX) {
            BZ2_compressBlock ( s, False );
            s->state = BZ_S_OUTPUT;
         }
         else
         if (s->strm->avail_in == 0) {
            break;
         }
      }

   }

   return progress_in || progress_out;
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
{
   Bool progress;
   EState* s;
   if (strm == NULL) return BZ_PARAM_ERROR;
   s = strm->state;
   if (s == NULL) return BZ_PARAM_ERROR;
   if (s->strm != strm) return BZ_PARAM_ERROR;

   preswitch:
   switch (s->mode) {

      case BZ_M_IDLE:
         return BZ_SEQUENCE_ERROR;

      case BZ_M_RUNNING:
         if (action == BZ_RUN) {
            progress = handle_compress ( strm );
            return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
         } 
         else
	 if (action == BZ_FLUSH) {
            s->avail_in_expect = strm->avail_in;
            s->mode = BZ_M_FLUSHING;
            goto preswitch;
         }
         else
         if (action == BZ_FINISH) {
            s->avail_in_expect = strm->avail_in;
            s->mode = BZ_M_FINISHING;
            goto preswitch;
         }
         else 
            return BZ_PARAM_ERROR;

      case BZ_M_FLUSHING:
         if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
         if (s->avail_in_expect != s->strm->avail_in) 
            return BZ_SEQUENCE_ERROR;
         progress = handle_compress ( strm );
         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
             s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
         s->mode = BZ_M_RUNNING;
         return BZ_RUN_OK;

      case BZ_M_FINISHING:
         if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
         if (s->avail_in_expect != s->strm->avail_in) 
            return BZ_SEQUENCE_ERROR;
         progress = handle_compress ( strm );
         if (!progress) return BZ_SEQUENCE_ERROR;
         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
             s->state_out_pos < s->numZ) return BZ_FINISH_OK;
         s->mode = BZ_M_IDLE;
         return BZ_STREAM_END;
   }
   return BZ_OK; /*--not reached--*/
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
{
   EState* s;
   if (strm == NULL) return BZ_PARAM_ERROR;
   s = strm->state;
   if (s == NULL) return BZ_PARAM_ERROR;
   if (s->strm != strm) return BZ_PARAM_ERROR;

   if (s->arr1 != NULL) BZFREE(s->arr1);
   if (s->arr2 != NULL) BZFREE(s->arr2);
   if (s->ftab != NULL) BZFREE(s->ftab);
   BZFREE(strm->state);

   strm->state = NULL;   

   return BZ_OK;
}


/*---------------------------------------------------*/
/*--- Decompression stuff                         ---*/
/*---------------------------------------------------*/

/*---------------------------------------------------*/
int BZ_API(BZ2_bzDecompressInit) 
                     ( bz_stream* strm, 
                       int        verbosity,
                       int        small )
{
   DState* s;

   if (!bz_config_ok()) return BZ_CONFIG_ERROR;

   if (strm == NULL) return BZ_PARAM_ERROR;
   if (small != 0 && small != 1) return BZ_PARAM_ERROR;
   if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;

   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;

   s = BZALLOC( sizeof(DState) );
   if (s == NULL) return BZ_MEM_ERROR;
   s->strm                  = strm;
   strm->state              = s;
   s->state                 = BZ_X_MAGIC_1;
   s->bsLive                = 0;
   s->bsBuff                = 0;
   s->calculatedCombinedCRC = 0;
   strm->total_in_lo32      = 0;
   strm->total_in_hi32      = 0;
   strm->total_out_lo32     = 0;
   strm->total_out_hi32     = 0;
   s->smallDecompress       = (Bool)small;
   s->ll4                   = NULL;
   s->ll16                  = NULL;
   s->tt                    = NULL;
   s->currBlockNo           = 0;
   s->verbosity             = verbosity;

   return BZ_OK;
}


/*---------------------------------------------------*/
/* Return  True iff data corruption is discovered.
   Returns False if there is no problem.
*/
static
Bool unRLE_obuf_to_output_FAST ( DState* s )
{
   UChar k1;

   if (s->blockRandomised) {

      while (True) {
         /* try to finish existing run */
         while (True) {
            if (s->strm->avail_out == 0) return False;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
            s->state_out_len--;
            s->strm->next_out++;
            s->strm->avail_out--;
            s->strm->total_out_lo32++;
            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
         }

         /* can a new run be started? */
         if (s->nblock_used == s->save_nblock+1) return False;
               
         /* Only caused by corrupt data stream? */
         if (s->nblock_used > s->save_nblock+1)
            return True;
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 2;
         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 3;
         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         s->state_out_len = ((Int32)k1) + 4;
         BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
      }

   } else {

      /* restore */
      UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
      UChar         c_state_out_ch       = s->state_out_ch;
      Int32         c_state_out_len      = s->state_out_len;
      Int32         c_nblock_used        = s->nblock_used;
      Int32         c_k0                 = s->k0;
      UInt32*       c_tt                 = s->tt;
      UInt32        c_tPos               = s->tPos;
      char*         cs_next_out          = s->strm->next_out;
      unsigned int  cs_avail_out         = s->strm->avail_out;
      /* end restore */

      UInt32       avail_out_INIT = cs_avail_out;
      Int32        s_save_nblockPP = s->save_nblock+1;
      unsigned int total_out_lo32_old;

      while (True) {

         /* try to finish existing run */
         if (c_state_out_len > 0) {
            while (True) {
               if (cs_avail_out == 0) goto return_notr;
               if (c_state_out_len == 1) break;
               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
               c_state_out_len--;
               cs_next_out++;
               cs_avail_out--;
            }
            s_state_out_len_eq_one:
            {
               if (cs_avail_out == 0) { 
                  c_state_out_len = 1; goto return_notr;
               };
               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
               cs_next_out++;
               cs_avail_out--;
            }
         }   
         /* Only caused by corrupt data stream? */
         if (c_nblock_used > s_save_nblockPP)
            return True;

         /* can a new run be started? */
         if (c_nblock_used == s_save_nblockPP) {
            c_state_out_len = 0; goto return_notr;
         };   
         c_state_out_ch = c_k0;
         BZ_GET_FAST_C(k1); c_nblock_used++;
         if (k1 != c_k0) { 
            c_k0 = k1; goto s_state_out_len_eq_one; 
         };
         if (c_nblock_used == s_save_nblockPP) 
            goto s_state_out_len_eq_one;
   
         c_state_out_len = 2;
         BZ_GET_FAST_C(k1); c_nblock_used++;
         if (c_nblock_used == s_save_nblockPP) continue;
         if (k1 != c_k0) { c_k0 = k1; continue; };
   
         c_state_out_len = 3;
         BZ_GET_FAST_C(k1); c_nblock_used++;
         if (c_nblock_used == s_save_nblockPP) continue;
         if (k1 != c_k0) { c_k0 = k1; continue; };
   
         BZ_GET_FAST_C(k1); c_nblock_used++;
         c_state_out_len = ((Int32)k1) + 4;
         BZ_GET_FAST_C(c_k0); c_nblock_used++;
      }

      return_notr:
      total_out_lo32_old = s->strm->total_out_lo32;
      s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
      if (s->strm->total_out_lo32 < total_out_lo32_old)
         s->strm->total_out_hi32++;

      /* save */
      s->calculatedBlockCRC = c_calculatedBlockCRC;
      s->state_out_ch       = c_state_out_ch;
      s->state_out_len      = c_state_out_len;
      s->nblock_used        = c_nblock_used;
      s->k0                 = c_k0;
      s->tt                 = c_tt;
      s->tPos               = c_tPos;
      s->strm->next_out     = cs_next_out;
      s->strm->avail_out    = cs_avail_out;
      /* end save */
   }
   return False;
}



/*---------------------------------------------------*/
/* Return  True iff data corruption is discovered.
   Returns False if there is no problem.
*/
static
Bool unRLE_obuf_to_output_SMALL ( DState* s )
{
   UChar k1;

   if (s->blockRandomised) {

      while (True) {
         /* try to finish existing run */
         while (True) {
            if (s->strm->avail_out == 0) return False;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
            s->state_out_len--;
            s->strm->next_out++;
            s->strm->avail_out--;
            s->strm->total_out_lo32++;
            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
         }
   
         /* can a new run be started? */
         if (s->nblock_used == s->save_nblock+1) return False;

         /* Only caused by corrupt data stream? */
         if (s->nblock_used > s->save_nblock+1)
            return True;
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 2;
         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 3;
         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
         k1 ^= BZ_RAND_MASK; s->nblock_used++;
         s->state_out_len = ((Int32)k1) + 4;
         BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
      }

   } else {

      while (True) {
         /* try to finish existing run */
         while (True) {
            if (s->strm->avail_out == 0) return False;
            if (s->state_out_len == 0) break;
            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
            s->state_out_len--;
            s->strm->next_out++;
            s->strm->avail_out--;
            s->strm->total_out_lo32++;
            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
         }
   
         /* can a new run be started? */
         if (s->nblock_used == s->save_nblock+1) return False;

         /* Only caused by corrupt data stream? */
         if (s->nblock_used > s->save_nblock+1)
            return True;
   
         s->state_out_len = 1;
         s->state_out_ch = s->k0;
         BZ_GET_SMALL(k1); s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 2;
         BZ_GET_SMALL(k1); s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         s->state_out_len = 3;
         BZ_GET_SMALL(k1); s->nblock_used++;
         if (s->nblock_used == s->save_nblock+1) continue;
         if (k1 != s->k0) { s->k0 = k1; continue; };
   
         BZ_GET_SMALL(k1); s->nblock_used++;
         s->state_out_len = ((Int32)k1) + 4;
         BZ_GET_SMALL(s->k0); s->nblock_used++;
      }

   }
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
{
   Bool    corrupt;
   DState* s;
   if (strm == NULL) return BZ_PARAM_ERROR;
   s = strm->state;
   if (s == NULL) return BZ_PARAM_ERROR;
   if (s->strm != strm) return BZ_PARAM_ERROR;

   while (True) {
      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
      if (s->state == BZ_X_OUTPUT) {
         if (s->smallDecompress)
            corrupt = unRLE_obuf_to_output_SMALL ( s ); else
            corrupt = unRLE_obuf_to_output_FAST  ( s );
         if (corrupt) return BZ_DATA_ERROR;
         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
            if (s->verbosity >= 3) 
               VPrintf2 ( " {0x%08x, 0x%08x}", s->storedBlockCRC, 
                          s->calculatedBlockCRC );
            if (s->verbosity >= 2) VPrintf0 ( "]" );
            if (s->calculatedBlockCRC != s->storedBlockCRC)
               return BZ_DATA_ERROR;
            s->calculatedCombinedCRC 
               = (s->calculatedCombinedCRC << 1) | 
                    (s->calculatedCombinedCRC >> 31);
            s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
            s->state = BZ_X_BLKHDR_1;
         } else {
            return BZ_OK;
         }
      }
      if (s->state >= BZ_X_MAGIC_1) {
         Int32 r = BZ2_decompress ( s );
         if (r == BZ_STREAM_END) {
            if (s->verbosity >= 3)
               VPrintf2 ( "\n    combined CRCs: stored = 0x%08x, computed = 0x%08x", 
                          s->storedCombinedCRC, s->calculatedCombinedCRC );
            if (s->calculatedCombinedCRC != s->storedCombinedCRC)
               return BZ_DATA_ERROR;
            return r;
         }
         if (s->state != BZ_X_OUTPUT) return r;
      }
   }

   AssertH ( 0, 6001 );

   return 0;  /*NOTREACHED*/
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzDecompressEnd)  ( bz_stream *strm )
{
   DState* s;
   if (strm == NULL) return BZ_PARAM_ERROR;
   s = strm->state;
   if (s == NULL) return BZ_PARAM_ERROR;
   if (s->strm != strm) return BZ_PARAM_ERROR;

   if (s->tt   != NULL) BZFREE(s->tt);
   if (s->ll16 != NULL) BZFREE(s->ll16);
   if (s->ll4  != NULL) BZFREE(s->ll4);

   BZFREE(strm->state);
   strm->state = NULL;

   return BZ_OK;
}


#ifndef BZ_NO_STDIO
/*---------------------------------------------------*/
/*--- File I/O stuff                              ---*/
/*---------------------------------------------------*/

#define BZ_SETERR(eee)                    \
{                                         \
   if (bzerror != NULL) *bzerror = eee;   \
   if (bzf != NULL) bzf->lastErr = eee;   \
}

typedef 
   struct {
      FILE*     handle;
      Char      buf[BZ_MAX_UNUSED];
      Int32     bufN;
      Bool      writing;
      bz_stream strm;
      Int32     lastErr;
      Bool      initialisedOk;
   }
   bzFile;


/*---------------------------------------------*/
static Bool myfeof ( FILE* f )
{
   Int32 c = fgetc ( f );
   if (c == EOF) return True;
   ungetc ( c, f );
   return False;
}


/*---------------------------------------------------*/
BZFILE* BZ_API(BZ2_bzWriteOpen) 
                    ( int*  bzerror,      
                      FILE* f, 
                      int   blockSize100k, 
                      int   verbosity,
                      int   workFactor )
{
   Int32   ret;
   bzFile* bzf = NULL;

   BZ_SETERR(BZ_OK);

   if (f == NULL ||
       (blockSize100k < 1 || blockSize100k > 9) ||
       (workFactor < 0 || workFactor > 250) ||
       (verbosity < 0 || verbosity > 4))
      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };

   if (ferror(f))
      { BZ_SETERR(BZ_IO_ERROR); return NULL; };

   bzf = malloc ( sizeof(bzFile) );
   if (bzf == NULL)
      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };

   BZ_SETERR(BZ_OK);
   bzf->initialisedOk = False;
   bzf->bufN          = 0;
   bzf->handle        = f;
   bzf->writing       = True;
   bzf->strm.bzalloc  = NULL;
   bzf->strm.bzfree   = NULL;
   bzf->strm.opaque   = NULL;

   if (workFactor == 0) workFactor = 30;
   ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, 
                              verbosity, workFactor );
   if (ret != BZ_OK)
      { BZ_SETERR(ret); free(bzf); return NULL; };

   bzf->strm.avail_in = 0;
   bzf->initialisedOk = True;
   return bzf;   
}



/*---------------------------------------------------*/
void BZ_API(BZ2_bzWrite)
             ( int*    bzerror, 
               BZFILE* b, 
               void*   buf, 
               int     len )
{
   Int32 n, n2, ret;
   bzFile* bzf = (bzFile*)b;

   BZ_SETERR(BZ_OK);
   if (bzf == NULL || buf == NULL || len < 0)
      { BZ_SETERR(BZ_PARAM_ERROR); return; };
   if (!(bzf->writing))
      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
   if (ferror(bzf->handle))
      { BZ_SETERR(BZ_IO_ERROR); return; };

   if (len == 0)
      { BZ_SETERR(BZ_OK); return; };

   bzf->strm.avail_in = len;
   bzf->strm.next_in  = buf;

   while (True) {
      bzf->strm.avail_out = BZ_MAX_UNUSED;
      bzf->strm.next_out = bzf->buf;
      ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
      if (ret != BZ_RUN_OK)
         { BZ_SETERR(ret); return; };

      if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
         n = BZ_MAX_UNUSED - bzf->strm.avail_out;
         n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
                       n, bzf->handle );
         if (n != n2 || ferror(bzf->handle))
            { BZ_SETERR(BZ_IO_ERROR); return; };
      }

      if (bzf->strm.avail_in == 0)
         { BZ_SETERR(BZ_OK); return; };
   }
}


/*---------------------------------------------------*/
void BZ_API(BZ2_bzWriteClose)
                  ( int*          bzerror, 
                    BZFILE*       b, 
                    int           abandon,
                    unsigned int* nbytes_in,
                    unsigned int* nbytes_out )
{
   BZ2_bzWriteClose64 ( bzerror, b, abandon, 
                        nbytes_in, NULL, nbytes_out, NULL );
}


void BZ_API(BZ2_bzWriteClose64)
                  ( int*          bzerror, 
                    BZFILE*       b, 
                    int           abandon,
                    unsigned int* nbytes_in_lo32,
                    unsigned int* nbytes_in_hi32,
                    unsigned int* nbytes_out_lo32,
                    unsigned int* nbytes_out_hi32 )
{
   Int32   n, n2, ret;
   bzFile* bzf = (bzFile*)b;

   if (bzf == NULL)
      { BZ_SETERR(BZ_OK); return; };
   if (!(bzf->writing))
      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
   if (ferror(bzf->handle))
      { BZ_SETERR(BZ_IO_ERROR); return; };

   if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
   if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
   if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
   if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;

   if ((!abandon) && bzf->lastErr == BZ_OK) {
      while (True) {
         bzf->strm.avail_out = BZ_MAX_UNUSED;
         bzf->strm.next_out = bzf->buf;
         ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
         if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
            { BZ_SETERR(ret); return; };

         if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
            n = BZ_MAX_UNUSED - bzf->strm.avail_out;
            n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
                          n, bzf->handle );
            if (n != n2 || ferror(bzf->handle))
               { BZ_SETERR(BZ_IO_ERROR); return; };
         }

         if (ret == BZ_STREAM_END) break;
      }
   }

   if ( !abandon && !ferror ( bzf->handle ) ) {
      fflush ( bzf->handle );
      if (ferror(bzf->handle))
         { BZ_SETERR(BZ_IO_ERROR); return; };
   }

   if (nbytes_in_lo32 != NULL)
      *nbytes_in_lo32 = bzf->strm.total_in_lo32;
   if (nbytes_in_hi32 != NULL)
      *nbytes_in_hi32 = bzf->strm.total_in_hi32;
   if (nbytes_out_lo32 != NULL)
      *nbytes_out_lo32 = bzf->strm.total_out_lo32;
   if (nbytes_out_hi32 != NULL)
      *nbytes_out_hi32 = bzf->strm.total_out_hi32;

   BZ_SETERR(BZ_OK);
   BZ2_bzCompressEnd ( &(bzf->strm) );
   free ( bzf );
}


/*---------------------------------------------------*/
BZFILE* BZ_API(BZ2_bzReadOpen) 
                   ( int*  bzerror, 
                     FILE* f, 
                     int   verbosity,
                     int   small,
                     void* unused,
                     int   nUnused )
{
   bzFile* bzf = NULL;
   int     ret;

   BZ_SETERR(BZ_OK);

   if (f == NULL || 
       (small != 0 && small != 1) ||
       (verbosity < 0 || verbosity > 4) ||
       (unused == NULL && nUnused != 0) ||
       (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };

   if (ferror(f))
      { BZ_SETERR(BZ_IO_ERROR); return NULL; };

   bzf = malloc ( sizeof(bzFile) );
   if (bzf == NULL) 
      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };

   BZ_SETERR(BZ_OK);

   bzf->initialisedOk = False;
   bzf->handle        = f;
   bzf->bufN          = 0;
   bzf->writing       = False;
   bzf->strm.bzalloc  = NULL;
   bzf->strm.bzfree   = NULL;
   bzf->strm.opaque   = NULL;
   
   while (nUnused > 0) {
      bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
      unused = ((void*)( 1 + ((UChar*)(unused))  ));
      nUnused--;
   }

   ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
   if (ret != BZ_OK)
      { BZ_SETERR(ret); free(bzf); return NULL; };

   bzf->strm.avail_in = bzf->bufN;
   bzf->strm.next_in  = bzf->buf;

   bzf->initialisedOk = True;
   return bzf;   
}


/*---------------------------------------------------*/
void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
{
   bzFile* bzf = (bzFile*)b;

   BZ_SETERR(BZ_OK);
   if (bzf == NULL)
      { BZ_SETERR(BZ_OK); return; };

   if (bzf->writing)
      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };

   if (bzf->initialisedOk)
      (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
   free ( bzf );
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzRead) 
           ( int*    bzerror, 
             BZFILE* b, 
             void*   buf, 
             int     len )
{
   Int32   n, ret;
   bzFile* bzf = (bzFile*)b;

   BZ_SETERR(BZ_OK);

   if (bzf == NULL || buf == NULL || len < 0)
      { BZ_SETERR(BZ_PARAM_ERROR); return 0; };

   if (bzf->writing)
      { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };

   if (len == 0)
      { BZ_SETERR(BZ_OK); return 0; };

   bzf->strm.avail_out = len;
   bzf->strm.next_out = buf;

   while (True) {

      if (ferror(bzf->handle)) 
         { BZ_SETERR(BZ_IO_ERROR); return 0; };

      if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
         n = fread ( bzf->buf, sizeof(UChar), 
                     BZ_MAX_UNUSED, bzf->handle );
         if (ferror(bzf->handle))
            { BZ_SETERR(BZ_IO_ERROR); return 0; };
         bzf->bufN = n;
         bzf->strm.avail_in = bzf->bufN;
         bzf->strm.next_in = bzf->buf;
      }

      ret = BZ2_bzDecompress ( &(bzf->strm) );

      if (ret != BZ_OK && ret != BZ_STREAM_END)
         { BZ_SETERR(ret); return 0; };

      if (ret == BZ_OK && myfeof(bzf->handle) && 
          bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
         { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };

      if (ret == BZ_STREAM_END)
         { BZ_SETERR(BZ_STREAM_END);
           return len - bzf->strm.avail_out; };
      if (bzf->strm.avail_out == 0)
         { BZ_SETERR(BZ_OK); return len; };
      
   }

   return 0; /*not reached*/
}


/*---------------------------------------------------*/
void BZ_API(BZ2_bzReadGetUnused) 
                     ( int*    bzerror, 
                       BZFILE* b, 
                       void**  unused, 
                       int*    nUnused )
{
   bzFile* bzf = (bzFile*)b;
   if (bzf == NULL)
      { BZ_SETERR(BZ_PARAM_ERROR); return; };
   if (bzf->lastErr != BZ_STREAM_END)
      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
   if (unused == NULL || nUnused == NULL)
      { BZ_SETERR(BZ_PARAM_ERROR); return; };

   BZ_SETERR(BZ_OK);
   *nUnused = bzf->strm.avail_in;
   *unused = bzf->strm.next_in;
}
#endif


/*---------------------------------------------------*/
/*--- Misc convenience stuff                      ---*/
/*---------------------------------------------------*/

/*---------------------------------------------------*/
int BZ_API(BZ2_bzBuffToBuffCompress) 
                         ( char*         dest, 
                           unsigned int* destLen,
                           char*         source, 
                           unsigned int  sourceLen,
                           int           blockSize100k, 
                           int           verbosity, 
                           int           workFactor )
{
   bz_stream strm;
   int ret;

   if (dest == NULL || destLen == NULL || 
       source == NULL ||
       blockSize100k < 1 || blockSize100k > 9 ||
       verbosity < 0 || verbosity > 4 ||
       workFactor < 0 || workFactor > 250) 
      return BZ_PARAM_ERROR;

   if (workFactor == 0) workFactor = 30;
   strm.bzalloc = NULL;
   strm.bzfree = NULL;
   strm.opaque = NULL;
   ret = BZ2_bzCompressInit ( &strm, blockSize100k, 
                              verbosity, workFactor );
   if (ret != BZ_OK) return ret;

   strm.next_in = source;
   strm.next_out = dest;
   strm.avail_in = sourceLen;
   strm.avail_out = *destLen;

   ret = BZ2_bzCompress ( &strm, BZ_FINISH );
   if (ret == BZ_FINISH_OK) goto output_overflow;
   if (ret != BZ_STREAM_END) goto errhandler;

   /* normal termination */
   *destLen -= strm.avail_out;   
   BZ2_bzCompressEnd ( &strm );
   return BZ_OK;

   output_overflow:
   BZ2_bzCompressEnd ( &strm );
   return BZ_OUTBUFF_FULL;

   errhandler:
   BZ2_bzCompressEnd ( &strm );
   return ret;
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzBuffToBuffDecompress) 
                           ( char*         dest, 
                             unsigned int* destLen,
                             char*         source, 
                             unsigned int  sourceLen,
                             int           small,
                             int           verbosity )
{
   bz_stream strm;
   int ret;

   if (dest == NULL || destLen == NULL || 
       source == NULL ||
       (small != 0 && small != 1) ||
       verbosity < 0 || verbosity > 4) 
          return BZ_PARAM_ERROR;

   strm.bzalloc = NULL;
   strm.bzfree = NULL;
   strm.opaque = NULL;
   ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
   if (ret != BZ_OK) return ret;

   strm.next_in = source;
   strm.next_out = dest;
   strm.avail_in = sourceLen;
   strm.avail_out = *destLen;

   ret = BZ2_bzDecompress ( &strm );
   if (ret == BZ_OK) goto output_overflow_or_eof;
   if (ret != BZ_STREAM_END) goto errhandler;

   /* normal termination */
   *destLen -= strm.avail_out;
   BZ2_bzDecompressEnd ( &strm );
   return BZ_OK;

   output_overflow_or_eof:
   if (strm.avail_out > 0) {
      BZ2_bzDecompressEnd ( &strm );
      return BZ_UNEXPECTED_EOF;
   } else {
      BZ2_bzDecompressEnd ( &strm );
      return BZ_OUTBUFF_FULL;
   };      

   errhandler:
   BZ2_bzDecompressEnd ( &strm );
   return ret; 
}


/*---------------------------------------------------*/
/*--
   Code contributed by Yoshioka Tsuneo
   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
   to support better zlib compatibility.
   This code is not _officially_ part of libbzip2 (yet);
   I haven't tested it, documented it, or considered the
   threading-safeness of it.
   If this code breaks, please contact both Yoshioka and me.
--*/
/*---------------------------------------------------*/

/*---------------------------------------------------*/
/*--
   return version like "0.9.0c".
--*/
const char * BZ_API(BZ2_bzlibVersion)(void)
{
   return BZ_VERSION;
}


#ifndef BZ_NO_STDIO
/*---------------------------------------------------*/

#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
#   include <fcntl.h>
#   include <io.h>
#   define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
#else
#   define SET_BINARY_MODE(file)
#endif
static
BZFILE * bzopen_or_bzdopen
               ( const char *path,   /* no use when bzdopen */
                 int fd,             /* no use when bzdopen */
                 const char *mode,
                 int open_mode)      /* bzopen: 0, bzdopen:1 */
{
   int    bzerr;
   char   unused[BZ_MAX_UNUSED];
   int    blockSize100k = 9;
   int    writing       = 0;
   char   mode2[10]     = "";
   FILE   *fp           = NULL;
   BZFILE *bzfp         = NULL;
   int    verbosity     = 0;
   int    workFactor    = 30;
   int    smallMode     = 0;
   int    nUnused       = 0; 

   if (mode == NULL) return NULL;
   while (*mode) {
      switch (*mode) {
      case 'r':
         writing = 0; break;
      case 'w':
         writing = 1; break;
      case 's':
         smallMode = 1; break;
      default:
         if (isdigit((int)(*mode))) {
            blockSize100k = *mode-BZ_HDR_0;
         }
      }
      mode++;
   }
   strcat(mode2, writing ? "w" : "r" );
   strcat(mode2,"b");   /* binary mode */

   if (open_mode==0) {
      if (path==NULL || strcmp(path,"")==0) {
        fp = (writing ? stdout : stdin);
        SET_BINARY_MODE(fp);
      } else {
        fp = fopen(path,mode2);
      }
   } else {
#ifdef BZ_STRICT_ANSI
      fp = NULL;
#else
      fp = fdopen(fd,mode2);
#endif
   }
   if (fp == NULL) return NULL;

   if (writing) {
      /* Guard against total chaos and anarchy -- JRS */
      if (blockSize100k < 1) blockSize100k = 1;
      if (blockSize100k > 9) blockSize100k = 9; 
      bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
                             verbosity,workFactor);
   } else {
      bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
                            unused,nUnused);
   }
   if (bzfp == NULL) {
      if (fp != stdin && fp != stdout) fclose(fp);
      return NULL;
   }
   return bzfp;
}


/*---------------------------------------------------*/
/*--
   open file for read or write.
      ex) bzopen("file","w9")
      case path="" or NULL => use stdin or stdout.
--*/
BZFILE * BZ_API(BZ2_bzopen)
               ( const char *path,
                 const char *mode )
{
   return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
}


/*---------------------------------------------------*/
BZFILE * BZ_API(BZ2_bzdopen)
               ( int fd,
                 const char *mode )
{
   return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
{
   int bzerr, nread;
   if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
   nread = BZ2_bzRead(&bzerr,b,buf,len);
   if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
      return nread;
   } else {
      return -1;
   }
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
{
   int bzerr;

   BZ2_bzWrite(&bzerr,b,buf,len);
   if(bzerr == BZ_OK){
      return len;
   }else{
      return -1;
   }
}


/*---------------------------------------------------*/
int BZ_API(BZ2_bzflush) (BZFILE *b)
{
   /* do nothing now... */
   return 0;
}


/*---------------------------------------------------*/
void BZ_API(BZ2_bzclose) (BZFILE* b)
{
   int bzerr;
   FILE *fp = ((bzFile *)b)->handle;
   
   if (b==NULL) {return;}
   if(((bzFile*)b)->writing){
      BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
      if(bzerr != BZ_OK){
         BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
      }
   }else{
      BZ2_bzReadClose(&bzerr,b);
   }
   if(fp!=stdin && fp!=stdout){
      fclose(fp);
   }
}


/*---------------------------------------------------*/
/*--
   return last error code 
--*/
static char *bzerrorstrings[] = {
       "OK"
      ,"SEQUENCE_ERROR"
      ,"PARAM_ERROR"
      ,"MEM_ERROR"
      ,"DATA_ERROR"
      ,"DATA_ERROR_MAGIC"
      ,"IO_ERROR"
      ,"UNEXPECTED_EOF"
      ,"OUTBUFF_FULL"
      ,"CONFIG_ERROR"
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
};


const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
{
   int err = ((bzFile *)b)->lastErr;

   if(err>0) err = 0;
   *errnum = err;
   return bzerrorstrings[err*-1];
}
#endif


/*-------------------------------------------------------------*/
/*--- end                                           bzlib.c ---*/
/*-------------------------------------------------------------*/


/////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////


/* A test program written to test robustness to decompression of
   corrupted data.  Usage is 
       unzcrash filename
   and the program will read the specified file, compress it (in memory),
   and then repeatedly decompress it, each time with a different bit of
   the compressed data inverted, so as to test all possible one-bit errors.
   This should not cause any invalid memory accesses.  If it does, 
   I want to know about it!

   p.s.  As you can see from the above description, the process is
   incredibly slow.  A file of size eg 5KB will cause it to run for
   many hours.
*/

//#include <stdio.h>
//#include <assert.h>
//#include "bzlib.h"

#define M_BLOCK 1000000


#define M_BLOCK_OUT (M_BLOCK + 1000000)
 char inbuf[M_BLOCK];
 char outbuf[M_BLOCK_OUT];
 char zbuf[M_BLOCK + 600 + (M_BLOCK / 100)];

int nIn;
unsigned int nOut;
unsigned int nZ;

#if 0
static char *bzerrorstrings[] = {
       "OK"
      ,"SEQUENCE_ERROR"
      ,"PARAM_ERROR"
      ,"MEM_ERROR"
      ,"DATA_ERROR"
      ,"DATA_ERROR_MAGIC"
      ,"IO_ERROR"
      ,"UNEXPECTED_EOF"
      ,"OUTBUFF_FULL"
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
      ,"???"   /* for future */
};
#endif

void flip_bit ( int bit )
{
   int byteno = bit / 8;
   int bitno  = bit % 8;
   UChar mask = 1 << bitno;
   //fprintf ( stderr, "(byte %d  bit %d  mask %d)",
   //          byteno, bitno, (int)mask );
   zbuf[byteno] ^= mask;
}

void set_inbuf ( void )
{
  inbuf[0] = 0;
  my_strcat(inbuf, "At her sixtieth birthday party, Margaret Thatcher ");
  my_strcat(inbuf, "blew on the cake to light the candles.\n");
  my_strcat(inbuf, "This program, bzip2, the associated library libbzip2, and all\n");
  my_strcat(inbuf, "documentation, are copyright (C) 1996-2004 Julian R Seward.  All\n");
  my_strcat(inbuf, "rights reserved.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "Redistribution and use in source and binary forms, with or without\n");
  my_strcat(inbuf, "modification, are permitted provided that the following conditions\n");
  my_strcat(inbuf, "are met:\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "1. Redistributions of source code must retain the above copyright\n");
  my_strcat(inbuf, "   notice, this list of conditions and the following disclaimer.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "2. The origin of this software must not be misrepresented; you must\n");
  my_strcat(inbuf, "   not claim that you wrote the original software.  If you use this\n");
  my_strcat(inbuf, "   software in a product, an acknowledgment in the product\n");
  my_strcat(inbuf, "   documentation would be appreciated but is not required.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "3. Altered source versions must be plainly marked as such, and must\n");
  my_strcat(inbuf, "   not be misrepresented as being the original software.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "4. The name of the author may not be used to endorse or promote\n");
  my_strcat(inbuf, "   products derived from this software without specific prior written\n");
  my_strcat(inbuf, "   permission.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS\n");
  my_strcat(inbuf, "OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n");
  my_strcat(inbuf, "WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE\n");
  my_strcat(inbuf, "ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY\n");
  my_strcat(inbuf, "DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\n");
  my_strcat(inbuf, "DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE\n");
  my_strcat(inbuf, "GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS\n");
  my_strcat(inbuf, "INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n");
  my_strcat(inbuf, "WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING\n");
  my_strcat(inbuf, "NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n");
  my_strcat(inbuf, "SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "ababababababababababababababababababababababababababababababab");
  my_strcat(inbuf, "		    GNU GENERAL PUBLIC LICENSE\n");
  my_strcat(inbuf, "		       Version 2, June 1991\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, " Copyright (C) 1989, 1991 Free Software Foundation, Inc.\n");
  my_strcat(inbuf, "     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\n");
  my_strcat(inbuf, " Everyone is permitted to copy and distribute verbatim copies\n");
  my_strcat(inbuf, " of this license document, but changing it is not allowed.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "			    Preamble\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  The licenses for most software are designed to take away your\n");
  my_strcat(inbuf, "freedom to share and change it.  By contrast, the GNU General Public\n");
  my_strcat(inbuf, "License is intended to guarantee your freedom to share and change free\n");
  my_strcat(inbuf, "software--to make sure the software is free for all its users.  This\n");
  my_strcat(inbuf, "General Public License applies to most of the Free Software\n");
  my_strcat(inbuf, "Foundation's software and to any other program whose authors commit to\n");
  my_strcat(inbuf, "using it.  (Some other Free Software Foundation software is covered by\n");
  my_strcat(inbuf, "the GNU Library General Public License instead.)  You can apply it to\n");
  my_strcat(inbuf, "your programs, too.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  When we speak of free software, we are referring to freedom, not\n");
  my_strcat(inbuf, "price.  Our General Public Licenses are designed to make sure that you\n");
  my_strcat(inbuf, "have the freedom to distribute copies of free software (and charge for\n");
  my_strcat(inbuf, "this service if you wish), that you receive source code or can get it\n");
  my_strcat(inbuf, "if you want it, that you can change the software or use pieces of it\n");
  my_strcat(inbuf, "in new free programs; and that you know you can do these things.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  To protect your rights, we need to make restrictions that forbid\n");
  my_strcat(inbuf, "anyone to deny you these rights or to ask you to surrender the rights.\n");
  my_strcat(inbuf, "These restrictions translate to certain responsibilities for you if you\n");
  my_strcat(inbuf, "distribute copies of the software, or if you modify it.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  For example, if you distribute copies of such a program, whether\n");
  my_strcat(inbuf, "gratis or for a fee, you must give the recipients all the rights that\n");
  my_strcat(inbuf, "you have.  You must make sure that they, too, receive or can get the\n");
  my_strcat(inbuf, "source code.  And you must show them these terms so they know their\n");
  my_strcat(inbuf, "rights.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  We protect your rights with two steps: (1) copyright the software, and\n");
  my_strcat(inbuf, "(2) offer you this license which gives you legal permission to copy,\n");
  my_strcat(inbuf, "distribute and/or modify the software.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  Also, for each author's protection and ours, we want to make certain\n");
  my_strcat(inbuf, "that everyone understands that there is no warranty for this free\n");
  my_strcat(inbuf, "software.  If the software is modified by someone else and passed on, we\n");
  my_strcat(inbuf, "want its recipients to know that what they have is not the original, so\n");
  my_strcat(inbuf, "that any problems introduced by others will not reflect on the original\n");
  my_strcat(inbuf, "authors' reputations.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  Finally, any free program is threatened constantly by software\n");
  my_strcat(inbuf, "patents.  We wish to avoid the danger that redistributors of a free\n");
  my_strcat(inbuf, "program will individually obtain patent licenses, in effect making the\n");
  my_strcat(inbuf, "program proprietary.  To prevent this, we have made it clear that any\n");
  my_strcat(inbuf, "patent must be licensed for everyone's free use or not licensed at all.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  The precise terms and conditions for copying, distribution and\n");
  my_strcat(inbuf, "modification follow.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "		    GNU GENERAL PUBLIC LICENSE\n");
  my_strcat(inbuf, "   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  0. This License applies to any program or other work which contains\n");
  my_strcat(inbuf, "a notice placed by the copyright holder saying it may be distributed\n");
  my_strcat(inbuf, "under the terms of this General Public License.  The Program, below,\n");
  my_strcat(inbuf, "refers to any such program or work, and a work based on the Program\n");
  my_strcat(inbuf, "means either the Program or any derivative work under copyright law:\n");
  my_strcat(inbuf, "that is to say, a work containing the Program or a portion of it,\n");
  my_strcat(inbuf, "either verbatim or with modifications and/or translated into another\n");
  my_strcat(inbuf, "language.  (Hereinafter, translation is included without limitation in\n");
  my_strcat(inbuf, "the term modification.)  Each licensee is addressed as you.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "Activities other than copying, distribution and modification are not\n");
  my_strcat(inbuf, "covered by this License; they are outside its scope.  The act of\n");
  my_strcat(inbuf, "running the Program is not restricted, and the output from the Program\n");
  my_strcat(inbuf, "is covered only if its contents constitute a work based on the\n");
  my_strcat(inbuf, "Program (independent of having been made by running the Program).\n");
  my_strcat(inbuf, "Whether that is true depends on what the Program does.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  1. You may copy and distribute verbatim copies of the Program's\n");
  my_strcat(inbuf, "source code as you receive it, in any medium, provided that you\n");
  my_strcat(inbuf, "conspicuously and appropriately publish on each copy an appropriate\n");
  my_strcat(inbuf, "copyright notice and disclaimer of warranty; keep intact all the\n");
  my_strcat(inbuf, "notices that refer to this License and to the absence of any warranty;\n");
  my_strcat(inbuf, "and give any other recipients of the Program a copy of this License\n");
  my_strcat(inbuf, "along with the Program.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "You may charge a fee for the physical act of transferring a copy, and\n");
  my_strcat(inbuf, "you may at your option offer warranty protection in exchange for a fee.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  2. You may modify your copy or copies of the Program or any portion\n");
  my_strcat(inbuf, "of it, thus forming a work based on the Program, and copy and\n");
  my_strcat(inbuf, "distribute such modifications or work under the terms of Section 1\n");
  my_strcat(inbuf, "above, provided that you also meet all of these conditions:\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    a) You must cause the modified files to carry prominent notices\n");
  my_strcat(inbuf, "    stating that you changed the files and the date of any change.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    b) You must cause any work that you distribute or publish, that in\n");
  my_strcat(inbuf, "    whole or in part contains or is derived from the Program or any\n");
  my_strcat(inbuf, "    part thereof, to be licensed as a whole at no charge to all third\n");
  my_strcat(inbuf, "    parties under the terms of this License.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    c) If the modified program normally reads commands interactively\n");
  my_strcat(inbuf, "    when run, you must cause it, when started running for such\n");
  my_strcat(inbuf, "    interactive use in the most ordinary way, to print or display an\n");
  my_strcat(inbuf, "    announcement including an appropriate copyright notice and a\n");
  my_strcat(inbuf, "    notice that there is no warranty (or else, saying that you provide\n");
  my_strcat(inbuf, "    a warranty) and that users may redistribute the program under\n");
  my_strcat(inbuf, "    these conditions, and telling the user how to view a copy of this\n");
  my_strcat(inbuf, "    License.  (Exception: if the Program itself is interactive but\n");
  my_strcat(inbuf, "    does not normally print such an announcement, your work based on\n");
  my_strcat(inbuf, "    the Program is not required to print an announcement.)\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "These requirements apply to the modified work as a whole.  If\n");
  my_strcat(inbuf, "identifiable sections of that work are not derived from the Program,\n");
  my_strcat(inbuf, "and can be reasonably considered independent and separate works in\n");
  my_strcat(inbuf, "themselves, then this License, and its terms, do not apply to those\n");
  my_strcat(inbuf, "sections when you distribute them as separate works.  But when you\n");
  my_strcat(inbuf, "distribute the same sections as part of a whole which is a work based\n");
  my_strcat(inbuf, "on the Program, the distribution of the whole must be on the terms of\n");
  my_strcat(inbuf, "this License, whose permissions for other licensees extend to the\n");
  my_strcat(inbuf, "entire whole, and thus to each and every part regardless of who wrote it.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "Thus, it is not the intent of this section to claim rights or contest\n");
  my_strcat(inbuf, "your rights to work written entirely by you; rather, the intent is to\n");
  my_strcat(inbuf, "exercise the right to control the distribution of derivative or\n");
  my_strcat(inbuf, "collective works based on the Program.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "In addition, mere aggregation of another work not based on the Program\n");
  my_strcat(inbuf, "with the Program (or with a work based on the Program) on a volume of\n");
  my_strcat(inbuf, "a storage or distribution medium does not bring the other work under\n");
  my_strcat(inbuf, "the scope of this License.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  3. You may copy and distribute the Program (or a work based on it,\n");
  my_strcat(inbuf, "under Section 2) in object code or executable form under the terms of\n");
  my_strcat(inbuf, "Sections 1 and 2 above provided that you also do one of the following:\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    a) Accompany it with the complete corresponding machine-readable\n");
  my_strcat(inbuf, "    source code, which must be distributed under the terms of Sections\n");
  my_strcat(inbuf, "    1 and 2 above on a medium customarily used for software interchange; or,\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    b) Accompany it with a written offer, valid for at least three\n");
  my_strcat(inbuf, "    years, to give any third party, for a charge no more than your\n");
  my_strcat(inbuf, "    cost of physically performing source distribution, a complete\n");
  my_strcat(inbuf, "    machine-readable copy of the corresponding source code, to be\n");
  my_strcat(inbuf, "    distributed under the terms of Sections 1 and 2 above on a medium\n");
  my_strcat(inbuf, "    customarily used for software interchange; or,\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    c) Accompany it with the information you received as to the offer\n");
  my_strcat(inbuf, "    to distribute corresponding source code.  (This alternative is\n");
  my_strcat(inbuf, "    allowed only for noncommercial distribution and only if you\n");
  my_strcat(inbuf, "    received the program in object code or executable form with such\n");
  my_strcat(inbuf, "    an offer, in accord with Subsection b above.)\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "The source code for a work means the preferred form of the work for\n");
  my_strcat(inbuf, "making modifications to it.  For an executable work, complete source\n");
  my_strcat(inbuf, "code means all the source code for all modules it contains, plus any\n");
  my_strcat(inbuf, "associated interface definition files, plus the scripts used to\n");
  my_strcat(inbuf, "control compilation and installation of the executable.  However, as a\n");
  my_strcat(inbuf, "special exception, the source code distributed need not include\n");
  my_strcat(inbuf, "anything that is normally distributed (in either source or binary\n");
  my_strcat(inbuf, "form) with the major components (compiler, kernel, and so on) of the\n");
  my_strcat(inbuf, "operating system on which the executable runs, unless that component\n");
  my_strcat(inbuf, "itself accompanies the executable.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "If distribution of executable or object code is made by offering\n");
  my_strcat(inbuf, "access to copy from a designated place, then offering equivalent\n");
  my_strcat(inbuf, "access to copy the source code from the same place counts as\n");
  my_strcat(inbuf, "distribution of the source code, even though third parties are not\n");
  my_strcat(inbuf, "compelled to copy the source along with the object code.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  4. You may not copy, modify, sublicense, or distribute the Program\n");
  my_strcat(inbuf, "except as expressly provided under this License.  Any attempt\n");
  my_strcat(inbuf, "otherwise to copy, modify, sublicense or distribute the Program is\n");
  my_strcat(inbuf, "void, and will automatically terminate your rights under this License.\n");
  my_strcat(inbuf, "However, parties who have received copies, or rights, from you under\n");
  my_strcat(inbuf, "this License will not have their licenses terminated so long as such\n");
  my_strcat(inbuf, "parties remain in full compliance.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  5. You are not required to accept this License, since you have not\n");
  my_strcat(inbuf, "signed it.  However, nothing else grants you permission to modify or\n");
  my_strcat(inbuf, "distribute the Program or its derivative works.  These actions are\n");
  my_strcat(inbuf, "prohibited by law if you do not accept this License.  Therefore, by\n");
  my_strcat(inbuf, "modifying or distributing the Program (or any work based on the\n");
  my_strcat(inbuf, "Program), you indicate your acceptance of this License to do so, and\n");
  my_strcat(inbuf, "all its terms and conditions for copying, distributing or modifying\n");
  my_strcat(inbuf, "the Program or works based on it.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  6. Each time you redistribute the Program (or any work based on the\n");
  my_strcat(inbuf, "Program), the recipient automatically receives a license from the\n");
  my_strcat(inbuf, "original licensor to copy, distribute or modify the Program subject to\n");
  my_strcat(inbuf, "these terms and conditions.  You may not impose any further\n");
  my_strcat(inbuf, "restrictions on the recipients' exercise of the rights granted herein.\n");
  my_strcat(inbuf, "You are not responsible for enforcing compliance by third parties to\n");
  my_strcat(inbuf, "this License.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  7. If, as a consequence of a court judgment or allegation of patent\n");
  my_strcat(inbuf, "infringement or for any other reason (not limited to patent issues),\n");
  my_strcat(inbuf, "conditions are imposed on you (whether by court order, agreement or\n");
  my_strcat(inbuf, "otherwise) that contradict the conditions of this License, they do not\n");
  my_strcat(inbuf, "excuse you from the conditions of this License.  If you cannot\n");
  my_strcat(inbuf, "distribute so as to satisfy simultaneously your obligations under this\n");
  my_strcat(inbuf, "License and any other pertinent obligations, then as a consequence you\n");
  my_strcat(inbuf, "may not distribute the Program at all.  For example, if a patent\n");
  my_strcat(inbuf, "license would not permit royalty-free redistribution of the Program by\n");
  my_strcat(inbuf, "all those who receive copies directly or indirectly through you, then\n");
  my_strcat(inbuf, "the only way you could satisfy both it and this License would be to\n");
  my_strcat(inbuf, "refrain entirely from distribution of the Program.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "If any portion of this section is held invalid or unenforceable under\n");
  my_strcat(inbuf, "any particular circumstance, the balance of the section is intended to\n");
  my_strcat(inbuf, "apply and the section as a whole is intended to apply in other\n");
  my_strcat(inbuf, "circumstances.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "It is not the purpose of this section to induce you to infringe any\n");
  my_strcat(inbuf, "patents or other property right claims or to contest validity of any\n");
  my_strcat(inbuf, "such claims; this section has the sole purpose of protecting the\n");
  my_strcat(inbuf, "integrity of the free software distribution system, which is\n");
  my_strcat(inbuf, "implemented by public license practices.  Many people have made\n");
  my_strcat(inbuf, "generous contributions to the wide range of software distributed\n");
  my_strcat(inbuf, "through that system in reliance on consistent application of that\n");
  my_strcat(inbuf, "system; it is up to the author/donor to decide if he or she is willing\n");
  my_strcat(inbuf, "to distribute software through any other system and a licensee cannot\n");
  my_strcat(inbuf, "impose that choice.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "This section is intended to make thoroughly clear what is believed to\n");
  my_strcat(inbuf, "be a consequence of the rest of this License.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  8. If the distribution and/or use of the Program is restricted in\n");
  my_strcat(inbuf, "certain countries either by patents or by copyrighted interfaces, the\n");
  my_strcat(inbuf, "original copyright holder who places the Program under this License\n");
  my_strcat(inbuf, "may add an explicit geographical distribution limitation excluding\n");
  my_strcat(inbuf, "those countries, so that distribution is permitted only in or among\n");
  my_strcat(inbuf, "countries not thus excluded.  In such case, this License incorporates\n");
  my_strcat(inbuf, "the limitation as if written in the body of this License.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  9. The Free Software Foundation may publish revised and/or new versions\n");
  my_strcat(inbuf, "of the General Public License from time to time.  Such new versions will\n");
  my_strcat(inbuf, "be similar in spirit to the present version, but may differ in detail to\n");
  my_strcat(inbuf, "address new problems or concerns.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "Each version is given a distinguishing version number.  If the Program\n");
  my_strcat(inbuf, "specifies a version number of this License which applies to it and any\n");
  my_strcat(inbuf, "later version, you have the option of following the terms and conditions\n");
  my_strcat(inbuf, "either of that version or of any later version published by the Free\n");
  my_strcat(inbuf, "Software Foundation.  If the Program does not specify a version number of\n");
  my_strcat(inbuf, "this License, you may choose any version ever published by the Free Software\n");
  my_strcat(inbuf, "Foundation.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  10. If you wish to incorporate parts of the Program into other free\n");
  my_strcat(inbuf, "programs whose distribution conditions are different, write to the author\n");
  my_strcat(inbuf, "to ask for permission.  For software which is copyrighted by the Free\n");
  my_strcat(inbuf, "Software Foundation, write to the Free Software Foundation; we sometimes\n");
  my_strcat(inbuf, "make exceptions for this.  Our decision will be guided by the two goals\n");
  my_strcat(inbuf, "of preserving the free status of all derivatives of our free software and\n");
  my_strcat(inbuf, "of promoting the sharing and reuse of software generally.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "			    NO WARRANTY\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY\n");
  my_strcat(inbuf, "FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN\n");
  my_strcat(inbuf, "OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES\n");
  my_strcat(inbuf, "PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED\n");
  my_strcat(inbuf, "OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF\n");
  my_strcat(inbuf, "MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS\n");
  my_strcat(inbuf, "TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE\n");
  my_strcat(inbuf, "PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,\n");
  my_strcat(inbuf, "REPAIR OR CORRECTION.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING\n");
  my_strcat(inbuf, "WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR\n");
  my_strcat(inbuf, "REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,\n");
  my_strcat(inbuf, "INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING\n");
  my_strcat(inbuf, "OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED\n");
  my_strcat(inbuf, "TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY\n");
  my_strcat(inbuf, "YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER\n");
  my_strcat(inbuf, "PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE\n");
  my_strcat(inbuf, "POSSIBILITY OF SUCH DAMAGES.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "		     END OF TERMS AND CONDITIONS\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "	    How to Apply These Terms to Your New Programs\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  If you develop a new program, and you want it to be of the greatest\n");
  my_strcat(inbuf, "possible use to the public, the best way to achieve this is to make it\n");
  my_strcat(inbuf, "free software which everyone can redistribute and change under these terms.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  To do so, attach the following notices to the program.  It is safest\n");
  my_strcat(inbuf, "to attach them to the start of each source file to most effectively\n");
  my_strcat(inbuf, "convey the exclusion of warranty; and each file should have at least\n");
  my_strcat(inbuf, "the copyright line and a pointer to where the full notice is found.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    <one line to give the program's name and a brief idea of what it does.>\n");
  my_strcat(inbuf, "    Copyright (C) <year>  <name of author>\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    This program is free software; you can redistribute it and/or modify\n");
  my_strcat(inbuf, "    it under the terms of the GNU General Public License as published by\n");
  my_strcat(inbuf, "    the Free Software Foundation; either version 2 of the License, or\n");
  my_strcat(inbuf, "    (at your option) any later version.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    This program is distributed in the hope that it will be useful,\n");
  my_strcat(inbuf, "    but WITHOUT ANY WARRANTY; without even the implied warranty of\n");
  my_strcat(inbuf, "    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n");
  my_strcat(inbuf, "    GNU General Public License for more details.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    You should have received a copy of the GNU General Public License\n");
  my_strcat(inbuf, "    along with this program; if not, write to the Free Software\n");
  my_strcat(inbuf, "    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "Also add information on how to contact you by electronic and paper mail.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "If the program is interactive, make it output a short notice like this\n");
  my_strcat(inbuf, "when it starts in an interactive mode:\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "    Gnomovision version 69, Copyright (C) year  name of author\n");
  my_strcat(inbuf, "    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.\n");
  my_strcat(inbuf, "    This is free software, and you are welcome to redistribute it\n");
  my_strcat(inbuf, "    under certain conditions; type `show c' for details.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "The hypothetical commands `show w' and `show c' should show the appropriate\n");
  my_strcat(inbuf, "parts of the General Public License.  Of course, the commands you use may\n");
  my_strcat(inbuf, "be called something other than `show w' and `show c'; they could even be\n");
  my_strcat(inbuf, "mouse-clicks or menu items--whatever suits your program.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "You should also get your employer (if you work as a programmer) or your\n");
  my_strcat(inbuf, "school, if any, to sign a copyright disclaimer for the program, if\n");
  my_strcat(inbuf, "necessary.  Here is a sample; alter the names:\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  Yoyodyne, Inc., hereby disclaims all copyright interest in the program\n");
  my_strcat(inbuf, "  `Gnomovision' (which makes passes at compilers) written by James Hacker.\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "  <signature of Ty Coon>, 1 April 1989\n");
  my_strcat(inbuf, "  Ty Coon, President of Vice\n");
  my_strcat(inbuf, "\n");
  my_strcat(inbuf, "This General Public License does not permit incorporating your program into\n");
  my_strcat(inbuf, "proprietary programs.  If your program is a subroutine library, you may\n");
  my_strcat(inbuf, "consider it more useful to permit linking proprietary applications with the\n");
  my_strcat(inbuf, "library.  If this is what you want to do, use the GNU Library General\n");
  my_strcat(inbuf, "Public License instead of this License.\n");

  my_strcat(inbuf, "\n");
}

#include <stdio.h>
#include "tests/malloc.h"
#include <assert.h>

/* For providing services. */
static HWord g_serviceFn ( HWord arg1, HWord arg2 )
{
   switch (arg1) {
      case 0: /* EXIT */
         exit(0);
      case 1: /* PUTC */
         putchar(arg2);
         return 0;
      case 2: /* MALLOC */
         return (HWord)malloc(arg2);
      case 3: /* FREE */
         free((void*)arg2);
         return 0;
      default:
         assert(0);
   }
}

static char *bzerrorstrings[] = {
       "OK"
       ,"SEQUENCE_ERROR"
       ,"PARAM_ERROR"
       ,"MEM_ERROR"
       ,"DATA_ERROR"
       ,"DATA_ERROR_MAGIC"
       ,"IO_ERROR"
       ,"UNEXPECTED_EOF"
       ,"OUTBUFF_FULL"
       ,"CONFIG_ERROR"
       ,"???"   /* for future */
       ,"???"   /* for future */
       ,"???"   /* for future */
       ,"???"   /* for future */
       ,"???"   /* for future */
       ,"???"   /* for future */
};

// If given a cmd line arg, behave as a correctness regtest
// (run fast and be verbose).  If not, run for a long time
// which is what is needed for the performance suite.
int main ( int argc, char** argv )
{
   int   r;
   int   bit;
   int   i;

   int regtest;
   assert(argc == 1 || argc == 2);
   regtest = argc==2;

   serviceFn = g_serviceFn;

   set_inbuf();
   nIn = vex_strlen(inbuf)+1;
   vex_printf( "%d bytes read\n", nIn );

   nZ = M_BLOCK;
   r = BZ2_bzBuffToBuffCompress (
          zbuf, &nZ, inbuf, nIn, 9, 3/*verb*/, 30 );

   if (r != BZ_OK) {
     vex_printf("initial compress failed!\n");
     (*serviceFn)(0,0);
   }
   vex_printf( "%d after compression\n", nZ );

   for (bit = 0; bit < nZ*8; bit += (bit < 35 ? 1 : (regtest?2377:137))) {
      if (regtest)
         vex_printf( "bit %d  ", bit );
      flip_bit ( bit );
      nOut = M_BLOCK_OUT;
      r = BZ2_bzBuffToBuffDecompress (
             outbuf, &nOut, zbuf, nZ, 1/*small*/, 0 );
      if (regtest)
         vex_printf( " %d  %s ", r, bzerrorstrings[-r] );

      if (r != BZ_OK) {
	 if (regtest)
            vex_printf( "\n" );
      } else {
         if (nOut != nIn) {
           vex_printf(  "nIn/nOut mismatch %d %d\n", nIn, nOut );
           (*serviceFn)(0,0);
         } else {
           for (i = 0; i < nOut; i++)
             if (inbuf[i] != outbuf[i]) { 
                vex_printf(  "mismatch at %d\n", i ); 
                (*serviceFn)(0,0); 
           }
           if (i == nOut) vex_printf( "really ok!\n" );
         }
      }

      flip_bit ( bit );
   }

#if 0
   assert (nOut == nIn);
   for (i = 0; i < nOut; i++) {
     if (inbuf[i] != outbuf[i]) {
        vex_printf( "difference at %d !\n", i );
        return 1;
     }
   }
#endif

   vex_printf( "all ok\n" );
   (*serviceFn)(0,0);
   /*NOTREACHED*/
   return 0;
}