path: root/arch/arm64/boot/dts/pxa1908-board-common.dtsi

/*
 *  Copyright (C) 2014 Marvell Technology Group Ltd.
 *  Author: Dongjiu Geng <djgeng@marvell.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  publishhed by the Free Software Foundation.
 */

#include "pxa1908.dtsi"
#include "pxa1908-pinfunc.h"
#include <dt-bindings/mmc/pxa_sdhci.h>

/ {
	chosen {
		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
	};

	memory {
		reg = <0x00000000 0x10000000>;
	};

	soc {
		devfreq-ddr {
			status = "okay";
		};

		pd_display: pd_display@0xd4282800 {
			compatible = "marvell,power-domain-display-pxa1u88";
			reg = <0xd4282800 0x1000>;
			clocks = <&soc_clocks PXA1U88_CLK_DISP_HCLK>,
				<&soc_clocks PXA1U88_CLK_DSI_ESC>;
			clock-names = "LCDCIHCLK", "esc_clk";
		};

		smmu {  /* iommu in vpu */
			clocks = <&soc_clocks PXA1U88_CLK_VPU>,
				<&soc_clocks PXA1U88_CLK_VPUBUS>;
			clock-names = "VPUCLK", "VPUACLK";
			marvell,power-domain = <&pd_vpu>;
			status = "okay";
		};

		axi@d4200000 {  /* AXI */

			pd_gc: pd_gc@d4282800 {
				compatible = "marvell,power-domain-common-gc";
				reg = <0xd4282800 0x1000>;
				clocks = <&soc_clocks PXA1U88_CLK_GC3D>;
				lpm-qos = <PM_QOS_CPUIDLE_BLOCK_DDR>;
			};

			pd_gc2d: pd_gc2d@d4282800 {
				compatible = "marvell,power-domain-common-gc2d";
				reg = <0xd4282800 0x1000>;
				clocks = <&soc_clocks PXA1U88_CLK_GC2D>;
				lpm-qos = <PM_QOS_CPUIDLE_BLOCK_DDR>;
			};

			gpu: gpu@C0400000 {
				marvell,power-domain = <&pd_gc>;
				marvell,gpu-mem-base = <0x09000000>;
				marvell,gpu-mem-size = <0x1000000>;
				clocks = <&soc_clocks PXA1U88_CLK_GC3D>,
					<&soc_clocks PXA1U88_CLK_GCSH>,
					<&soc_clocks PXA1U88_CLK_GCBUS>;
				clock-names = "GC3DFCLK", "GCSHCLK", "GC3DACLK";
				status = "okay";
			};

			gpu2d: gpu2d@d420c000 {
				marvell,power-domain = <&pd_gc2d>;
				clocks = <&soc_clocks PXA1U88_CLK_GC2D>,
					<&soc_clocks PXA1U88_CLK_GCBUS>;
				clock-names = "GC2DFCLK", "GC2DACLK";
				status = "okay";
			};

			pd_vpu: pd_vpu@d4282800 {
				compatible = "marvell,power-domain-common-vpu";
				reg = <0xd4282800 0x1000>;
				clocks = <&soc_clocks PXA1U88_CLK_VPU>;
				lpm-qos = <PM_QOS_CPUIDLE_BLOCK_DDR>;
			};

			pd_smmu: pd_smmu@c0010000 {
				compatible = "marvell,power-domain-smmu-pxa1u88";
				reg = <0xc0010000 0x10000>;
				marvell,power-domain-parent = <&pd_vpu>;
				clocks = <&soc_clocks PXA1U88_CLK_VPU>,
					<&soc_clocks PXA1U88_CLK_VPUBUS>;
				clock-names = "VPUCLK", "VPUACLK";
			};

			coda7542: coda7542@d420d000 {
				marvell,sram-internal = <0>;
				marvell,nv21_support = <1>;
				marvell,seconddaxi_none = <1>;
				marvell,power-domain = <&pd_smmu>;
				clocks = <&soc_clocks PXA1U88_CLK_VPU>,
					<&soc_clocks PXA1U88_CLK_VPUBUS>;
				clock-names = "VPUCLK", "VPUACLK";
				status = "okay";
			};

			devfreq-vpu {
				marvell,power-domain = <&pd_vpu>;
				status = "okay";
			};

			dsi: dsi@d420b800 {
				marvell,phy-name = "mmp_dsi1";
				marvell,plat-path-name = "mmp_pnpath";
				marvell,dsi-lanes = <4>;
				marvell,burst-mode = <2>;
				marvell,hbp-en;
				status = "okay";
			};

			asram: asram@d12a0000 {
				status = "okay";
			};

			adma0: adma@d128d800 {
				status = "okay";
			};

			ccic1: ccic@d420a000 {
				pinctrl-names = "default","twsi","sccb";
				pinctrl-0 = <&ccic1_pmx_func1>;
				pinctrl-1 = <&ccic1_pmx_func2>;
				pinctrl-2 = <&ccic1_pmx_func3>;
				interrupts = <0 42 0x4>;
				status = "okay";
			};

			ccic2: ccic@d420a800 {
				pinctrl-names = "default","twsi","sccb";
				pinctrl-0 = <&ccic2_pmx_func1>;
				pinctrl-1 = <&ccic2_pmx_func2>;
				pinctrl-2 = <&ccic2_pmx_func3>;
				/*ccic2 use ccic1 I2C pin on pxa1908dkb */
				sync_ccic1_pin;
				interrupts = <0 77 0x4>;
				status = "okay";
			};

			sc2mmu1: sc2mmu@d420F000 {
				interrupts = <0 15 0x4>;
				status = "okay";
			};

			b52isp: b52isp@0xC0200000 {
				interrupts = <0 11 0x4>;
				status = "okay";
			};

			vdma: vdma@d4209000 {
				marvell,vdma-num = <1>;
				marvell,vdma-axi = <1>;
				status = "okay";
				vdma1 {
					marvell,vdma-id = <0>;
					marvell,sram-size = <15360>;
					marvell,is_vid = <0>;
				};
			};

			disp: disp@d420b000 {
				pinctrl-names = "default";
				marvell,disp-name = "disp_name";
				marvell,path-num = <1>;
				marvell,power-domain = <&pd_display>;
				clocks = <&soc_clocks PXA1U88_CLK_DISP_HCLK>,
					<&soc_clocks PXA1U88_CLK_PLL4VCO>,
					/* parent1-clk-tbl clk */
					<&soc_clocks PXA1U88_CLK_DISP1>,
					<&soc_clocks PXA1U88_CLK_DISP4>,
					/* parent2-clk-tbl clk */
					<&soc_clocks PXA1U88_CLK_PLL1_624>,
					<&soc_clocks PXA1U88_CLK_PLL1_832>,
					<&soc_clocks PXA1U88_CLK_PLL1_499_EN>,
					<&soc_clocks PXA1U88_CLK_PLL1_499>,
					<&soc_clocks PXA1U88_CLK_PLL4>,
					<&soc_clocks PXA1U88_CLK_PLL4VCODIV3>;
				clock-names = "LCDCIHCLK", "pll4_vco",
					/* parent1-clk-tbl clk */
					"disp1_clk", "dsipll_clk",
					/* parent2-clk-tbl clk */
					"pll1_624", "pll1_832", "pll1_499_en", "pll1_499", "pll4", "pll4_div3";
				status = "okay";
				path1 {
					marvell,path-name = "mmp_pnpath";
					marvell,overlay-num = <1>;
					marvell,overlay-table = <1>;
					marvell,output-type = <1>;
					marvell,path-config = <0x10>;
					marvell,link-config = <0x1>;
					disp_apmu {
						plat = <4>;
						apmu-reg = <0xd428284c>;
						clksrc-bit = <9>;
						parent1-clk-tbl = "disp1_clk", "dsipll_clk";
						parent2-clk-tbl = "pll1_624", "pll1_832", "pll1_499_en", "pll4", "pll4_div3";
					};
				};
			};

			fb0: fbbase {
				marvell,fb-name = "mmp-fb";
				marvell,path-name = "mmp_pnpath";
				marvell,overlay-id = <1>;
				marvell,default-pixfmt = <0x109>;
				marvell,buffer-num = <3>;
				marvell,fb-mem = <0x17000000>;
				status = "okay";
                        };

			/* eMMC */
			sdh2: sdh@d4281000 {
				pinctrl-names = "default", "fast";
				pinctrl-0 = <&sdh2_pmx_func1 &sdh2_pmx_func2>;
				pinctrl-1 = <&sdh2_pmx_func1_fast &sdh2_pmx_func2_fast>;
				bus-width = <8>;
				non-removable;
				marvell,sdh-pm-runtime-en;
				marvell,sdh-quirks = <(
						SDHCI_QUIRK_BROKEN_ADMA |
						SDHCI_QUIRK_BROKEN_CARD_DETECTION
						)>;
				marvell,sdh-quirks2 = <(
						SDHCI_QUIRK2_TUNING_ADMA_BROKEN |
						/* SDHCI_QUIRK2_BROKEN_HS200 | */
						SDHCI_QUIRK2_TIMEOUT_SHORT
						)>;
				marvell,sdh-host-caps = <(MMC_CAP_1_8V_DDR)>;
				marvell,sdh-host-caps2 = <(
						MMC_CAP2_DISABLE_BLK_ASYNC |
						MMC_CAP2_SKIP_SD |
						MMC_CAP2_SKIP_SDIO
						)>;
				marvell,sdh-flags = <(
						PXA_FLAG_NEW_RX_CFG_REG |
						PXA_FLAG_SD_8_BIT_CAPABLE_SLOT |
						PXA_FLAG_ENABLE_CLOCK_GATING |
						PXA_FLAG_TX_SEL_BUS_CLK
						)>;
		/* prop "sdh-dtr-data": <timing preset_rate src_rate tx_delay rx_delay sdclk_sel0 sdclk_sel1 fakeclk_en> */
				marvell,sdh-dtr-data = <PXA_MMC_TIMING_LEGACY PXA_SDH_DTR_26M PXA_SDH_DTR_52M 0 0 0 0 0>,
						<PXA_MMC_TIMING_MMC_HS PXA_SDH_DTR_52M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_DDR50 PXA_SDH_DTR_52M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_MMC_HS200 PXA_SDH_DTR_156M PXA_SDH_DTR_156M 0 0 3 0 0>,
						<PXA_MMC_TIMING_MAX PXA_SDH_DTR_PS_NONE PXA_SDH_DTR_104M 0 0 0 0 0>;
				marvell,sdh-tuning-win-limit = <100>;
				marvell,sdh-dvfs-levels = <1 7>; /* tuning from dvfs level 1 to 7 */
				marvell,sdh-tuning-mode = <PXA_SDH_TUNING_DVFS>;
				status = "okay";
			};

			/* SD card */
			sdh0: sdh@d4280000 {
				pinctrl-names = "default", "fast";
				pinctrl-0 = <&sdh0_pmx_func1 &sdh0_pmx_func2 &sdh0_pmx_func3>;
				pinctrl-1 = <&sdh0_pmx_func1 &sdh0_pmx_func2_fast &sdh0_pmx_func3_fast>;
				vqmmc-supply	= <&ldo6>;
				vmmc-supply	= <&ldo14>;
				cd-gpios = <&gpio 92 0>;
				cd-inverted;
				bus-width = <4>;
				wp-inverted;
				marvell,sdh-pm-runtime-en;
				marvell,sdh-host-caps-disable = <(MMC_CAP_UHS_SDR104)>;
				marvell,sdh-quirks = <(
						SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
						SDHCI_QUIRK_BROKEN_CARD_DETECTION
						)>;

				/* as HW design, only SD Card's host has AIB_MMC register */
				marvell,sdh-quirks2 = <(
						SDHCI_QUIRK2_HOST_NO_CMD23 |
						SDHCI_QUIRK2_SET_AIB_MMC |
						SDHCI_QUIRK2_TUNING_ADMA_BROKEN |
						SDHCI_QUIRK2_TIMEOUT_SHORT |
						SDHCI_QUIRK2_DMA_CLOCK_FORCE_ON
						)>;
				marvell,sdh-host-caps2 = <(
						MMC_CAP2_SKIP_MMC |
						MMC_CAP2_SKIP_SDIO
						)>;
				marvell,sdh-flags = <(
						PXA_FLAG_NEW_RX_CFG_REG |
						PXA_FLAG_TX_SEL_BUS_CLK |
						PXA_FLAG_ENABLE_CLOCK_GATING
						)>;
		/* prop "sdh-dtr-data": <timing preset_rate src_rate tx_delay rx_delay sdclk_sel0 sdclk_sel1 fakeclk_en> */
				marvell,sdh-dtr-data = <PXA_MMC_TIMING_LEGACY PXA_SDH_DTR_26M PXA_SDH_DTR_52M 0 0 0 0 0>,
						<PXA_MMC_TIMING_SD_HS PXA_SDH_DTR_52M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_DDR50 PXA_SDH_DTR_52M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_SDR104 PXA_SDH_DTR_208M PXA_SDH_DTR_208M 0 0 3 0 0>,
						<PXA_MMC_TIMING_MAX PXA_SDH_DTR_PS_NONE PXA_SDH_DTR_104M 0 0 0 0 0>;
				marvell,sdh-tuning-win-limit = <120>;
				marvell,sdh-dvfs-levels = <1 7>; /* tuning from dvfs level 1 to 7 */
				marvell,sdh-tuning-mode = <PXA_SDH_TUNING_DVFS>;
				status = "okay";
			};

			/* SDIO */
			sdh1: sdh@d4280800 {
				pinctrl-names = "default", "fast", "sleep";
				pinctrl-0 = <&sdh1_pmx_func1 &sdh1_pmx_func2 &sdh1_pmx_func3 &sdh1_pmx_func4>;
				pinctrl-1 = <&sdh1_pmx_func1_fast &sdh1_pmx_func2_fast &sdh1_pmx_func3 &sdh1_pmx_func4>;
				pinctrl-2 = <&sdh1_pmx_edge_wakeup>;
				bus-width = <4>;
				marvell,sdh-pm-runtime-en;
				marvell,sdh-host-caps-disable = <(MMC_CAP_UHS_SDR50)>;
				marvell,sdh-quirks = <(SDHCI_QUIRK_BROKEN_CARD_DETECTION)>;
				marvell,sdh-quirks2 = <(SDHCI_QUIRK2_HOLDSUSPEND_AFTER_REQUEST |
						SDHCI_QUIRK2_FAKE_SDIO_IRQ_IN_UHS |
						SDHCI_QUIRK2_TUNING_ADMA_BROKEN |
						SDHCI_QUIRK2_TIMEOUT_SHORT
						)>;
				marvell,sdh-pm-caps = <(MMC_PM_KEEP_POWER)>;
				marvell,sdh-host-caps2 = <(
						MMC_CAP2_NO_VOLTAGE_SWITCH |
						MMC_CAP2_SKIP_MMC |
						MMC_CAP2_SKIP_SD
						)>;
				marvell,sdh-flags = <(
						PXA_FLAG_NEW_RX_CFG_REG |
						PXA_FLAG_WAKEUP_HOST |
						PXA_FLAG_TX_SEL_BUS_CLK |
						PXA_FLAG_EN_PM_RUNTIME |
						PXA_FLAG_DISABLE_PROBE_CDSCAN
						)>;
		/* prop "sdh-dtr-data": <timing preset_rate src_rate tx_delay rx_delay sdclk_sel0 sdclk_sel1 fakeclk_en> */
				marvell,sdh-dtr-data = <PXA_MMC_TIMING_LEGACY PXA_SDH_DTR_26M PXA_SDH_DTR_52M 0 0 0 0 0>,
						<PXA_MMC_TIMING_SD_HS PXA_SDH_DTR_45M PXA_SDH_DTR_89M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_DDR50 PXA_SDH_DTR_52M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_SDR50 PXA_SDH_DTR_104M PXA_SDH_DTR_104M 0 0 0 0 0>,
						<PXA_MMC_TIMING_UHS_SDR104 PXA_SDH_DTR_156M PXA_SDH_DTR_156M 0 0 3 0 0>,
						<PXA_MMC_TIMING_MAX PXA_SDH_DTR_PS_NONE PXA_SDH_DTR_89M 0 0 0 0 0>;
				marvell,sdh-tuning-win-limit = <120>;
				marvell,sdh-dvfs-levels = <1 7>; /* tuning from dvfs level 1 to 7 */
				marvell,sdh-tuning-mode = <PXA_SDH_TUNING_DVFS>;
				status = "okay";
			};
		};

		apb@d4000000 {
			pdma0: pdma@d4000000 {
				status = "okay";
			};

			timer0: timer@d4014000 {
				status = "disabled";
			};

			timer1: timer@d4016000 {
				status = "disabled";
			};

			edgewakeup: edgewakeup@d4019800 {
				status = "okay";
			};

			uart0: uart@d4017000 {
				pinctrl-names = "default", "sleep";
				pinctrl-0 = <&uart0_pmx_func1 &uart0_pmx_func2>;
				pinctrl-1 = <&uart0_pmx_func1_sleep &uart0_pmx_func2>;
				edge-wakeup-gpio = <47>; /* GPIO47: UART rx pin */
			};

			thermal: thermal@d4013300 {
				/*
				    One line indicate for one cooling state
				    first column for cpufreq constraint,
				    second column for hotplug constraint.
				    example:
					core-p0 = <1 0
						   3 0>;
				    means: when temp get higher, apply 4 * 1.5G -> 4 * 1.2G
					when temp get more higher, apply 4 * 1.2G -> 4 * 0.8G
				    From SV model, supported cooling state is as below:
					<1 0	<0 2	<1 0	<0 2
					 3 0>	 3 0>	 2 2>	 2 2>

				*/
				core-p0 = <1 0
					   3 0>;
				/*
				    thermal safe 624M *4 or 800M * 2, thus supported
				    <4 0> <3 2>
				*/
				thermal_safe-p0 = <4 0>;
				status = "okay";
			};

			pmx: pinmux@d401e000 {
				/* pin base, nr pins & gpio function */
				pinctrl-single,gpio-range = <
					/*
					 * GPIO number is hardcoded for range at here.
					 * In gpio chip, GPIO number is not hardcoded for range.
					 * Since one gpio pin may be routed to multiple pins,
					 * define these gpio range in pxa910-dkb.dts not pxa910.dtsi.
					 */
					&range 55 55 0	/* GPIO0 ~ GPIO54 */
					&range 110 32 0 /* GPIO67 ~ GPIO98 */
					&range 52 1 0	/* GPIO124 */
				>;
				pinctrl-names = "default";
				pinctrl-0 = <&mfp_pins_group_0 &mfp_pins_group_1>;

				/*
				 * these unused pins have been pulled down external
				 * We can set them as PULL_FLOAT
				 *
				 * But in fact, these registers can be removed in the
				 * future, considering the cost down
				 *
				 * So we just set them as PULL_DOWN here
				 * (Suitable for external PULL_DOWN and FLOATING)
				 *
				 * after remove external registers, no change is need
				 */
				mfp_pins_group_0: mfp_pins_group_0 {
					pinctrl-single,pins = <
						DF_IO8 AF0
						DF_IO9 AF0
						DF_IO10 AF0
						DF_IO11 AF0
						DF_IO12 AF0
						DF_IO13 AF0
						DF_IO15 AF0
					>;
					DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_NONE;
				};

				/*
				 * these unused pins have been pulled up external
				 * We can set them as PULL_FLOAT
				 *
				 * But in fact, these registers can be removed in the
				 * future, considering the cost down			 *
				 *
				 * So we just set them as PULL_UP here
				 * (Suitable for external PULL_UP and FLOATING)
				 *
				 * after remove external registers, no change is need
				 */
				mfp_pins_group_1: mfp_pins_group_1 {
					pinctrl-single,pins = <
						DF_IO14 AF0
					>;
					DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_NONE;
				};

				uart0_pmx_func1: uart0_pmx_func1 {
					pinctrl-single,pins = <
						GPIO47 AF6
					>;
					MFP_DEFAULT;
				};

				uart0_pmx_func2: uart0_pmx_func2 {
					pinctrl-single,pins = <
						GPIO48 AF6
					>;
					MFP_DEFAULT;
				};

				uart0_pmx_func1_sleep: uart0_pmx_func1_sleep {
					pinctrl-single,pins = <
						GPIO47 AF6
					>;
					DS_MEDIUM;PULL_NONE;EDGE_BOTH;LPM_NONE;
				};

				keypad_in_func: keypad_in_func {
					pinctrl-single,pins = <
						GPIO16 AF1	/* GPIO016_KP_DKIN1 */
						GPIO17 AF1	/* GPIO017_KP_DKIN2 */
					>;
					DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_DRIVE_HIGH;
				};

				/* MFP_DEFAULT */
				sdh0_pmx_func1: sdh0_pmx_func1 {
					pinctrl-single,pins = <
						MMC1_DAT7 AF1
						MMC1_DAT6 AF1
						MMC1_DAT5 AF1
						MMC1_DAT4 AF1
						MMC1_WP AF1
						MMC1_CD AF1 /* Above pins not used by sdh1, configured as GPIO */
						GPIO92 AF0 /* GPIO92, used for sd card detect */
					>;
					MFP_DEFAULT;
				};

				/* no pull, no LPM */
				sdh0_pmx_func2: sdh0_pmx_func2 {
					pinctrl-single,pins = <
						MMC1_DAT3 AF0
						MMC1_DAT2 AF0
						MMC1_DAT1 AF0
						MMC1_DAT0 AF0
						MMC1_CMD AF0
					>;
					MFP_DEFAULT;
				};

				/* MFP_LPM_DRIVE_LOW */
				sdh0_pmx_func3: sdh0_pmx_func3 {
					pinctrl-single,pins = <
						MMC1_CLK AF0
					>;
					MFP_LPM_DRIVE_LOW;
				};

				/* ds fast, no pull, no LPM */
				sdh0_pmx_func2_fast: sdh0_pmx_func2_fast {
					pinctrl-single,pins = <
						MMC1_DAT3 AF0
						MMC1_DAT2 AF0
						MMC1_DAT1 AF0
						MMC1_DAT0 AF0
						MMC1_CMD AF0
					>;
					DS_FAST;PULL_NONE;EDGE_NONE;LPM_NONE;
				};

				/* ds fast, LPM_DRIVE_LOW */
				sdh0_pmx_func3_fast: sdh0_pmx_func3_fast {
					pinctrl-single,pins = <
						MMC1_CLK AF0
					>;
					DS_FAST;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW;
				};

				sdh1_pmx_func1_fast: sdh1_pmx_func1_fast {
						pinctrl-single,pins = <
							GPIO37 AF1
							GPIO38 AF1
							GPIO39 AF1
							GPIO40 AF1
							GPIO41 AF1
						>;
						DS_FAST;PULL_NONE;EDGE_NONE;LPM_NONE;
				};

				sdh1_pmx_func2_fast: sdh1_pmx_func2_fast {
						pinctrl-single,pins = <
							GPIO42 AF1
						>;
						DS_FAST;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW;
				};

				sdh1_pmx_func1: sdh1_pmx_func1 {
						pinctrl-single,pins = <
							GPIO37 AF1
							GPIO38 AF1
							GPIO39 AF1
							GPIO40 AF1
							GPIO41 AF1
						>;
						MFP_DEFAULT;
				};

				sdh1_pmx_func2: sdh1_pmx_func2 {
						pinctrl-single,pins = <
							GPIO42 AF1
						>;
						DS_SLOW0;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW;
				};

				sdh1_pmx_func3: sdh1_pmx_func3 {
						pinctrl-single,pins = <
							GPIO7 AF0
						>;
						DS_MEDIUM;PULL_FLOAT;EDGE_NONE;LPM_NONE;
				};

				sdh1_pmx_func4: sdh1_pmx_func4 {
						pinctrl-single,pins = <
							GPIO8 AF0
							GPIO5 AF0
						>;
						DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_NONE;
				};

				sdh1_pmx_edge_wakeup: sdh1_pmx_edge_wakeup {
						pinctrl-single,pins = <
							GPIO39 AF1
						>;
						DS_MEDIUM;PULL_NONE;EDGE_BOTH;LPM_NONE;
				};

				/* no pull, no LPM */
				sdh2_pmx_func1: sdh2_pmx_func1 {
					pinctrl-single,pins = <
						ND_IO7 AF1
						ND_IO6 AF1
						ND_IO5 AF1
						ND_IO4 AF1
						ND_IO3 AF1
						ND_IO2 AF1
						ND_IO1 AF1
						ND_IO0 AF1
						ND_CLE_SM_OEN AF1
					>;
					MFP_DEFAULT;
				};

				/* MFP_LPM_DRIVE_LOW */
				sdh2_pmx_func2: sdh2_pmx_func2 {
					pinctrl-single,pins = <
						SM_SCLK AF1
					>;
					MFP_LPM_DRIVE_LOW;
				};

				/* ds fast, no pull, no LPM */
				sdh2_pmx_func1_fast: sdh2_pmx_func1_fast {
					pinctrl-single,pins = <
						ND_IO7 AF1
						ND_IO6 AF1
						ND_IO5 AF1
						ND_IO4 AF1
						ND_IO3 AF1
						ND_IO2 AF1
						ND_IO1 AF1
						ND_IO0 AF1
						ND_CLE_SM_OEN AF1
					>;
					DS_FAST;PULL_NONE;EDGE_NONE;LPM_NONE;
				};

				/* ds fast, LPM_DRIVE_LOW */
				sdh2_pmx_func2_fast: sdh2_pmx_func2_fast {
					pinctrl-single,pins = <
						SM_SCLK AF1
					>;
					DS_FAST;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW;
				};

				sspa0_gpio: sspa0_gpio {
					pinctrl-single,pins = <
						GPIO21 AF0
						GPIO22 AF0
						GPIO23 AF0
						GPIO24 AF0
					>;
					DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_FLOAT;
				};
				sspa0_func: sspa0_func {
					pinctrl-single,pins = <
						GPIO21 AF7
						GPIO22 AF7
						GPIO23 AF7
						GPIO24 AF7
					>;
					DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_NONE;
				};

				twsi0_pmx_func: twsi0_pmx_func {
					/* gpio53/54: AF1 */
					pinctrl-single,pins = <
						GPIO53 AF1
						GPIO54 AF1
					>;
					MFP_LPM_FLOAT;
				};
				twsi0_pmx_gpio: twsi0_pmx_gpio {
					pinctrl-single,pins = <
						GPIO53 AF0
						GPIO54 AF0
					>;
					MFP_LPM_FLOAT;
				};
				twsi1_pmx_func: twsi1_pmx_func {
					/* gpio87/88: AF5 */
					pinctrl-single,pins = <
						GPIO87 AF5
						GPIO88 AF5
					>;
					MFP_LPM_FLOAT;
				};
				twsi1_pmx_gpio: twsi1_pmx_gpio {
					pinctrl-single,pins = <
						GPIO87 AF0
						GPIO88 AF0
					>;
					MFP_LPM_FLOAT;
				};
				twsi3_pmx_func: twsi3_pmx_func {
					/* gpio73/74: AF5 */
					pinctrl-single,pins = <
						GPIO73 AF5
						GPIO74 AF5
					>;
					MFP_LPM_FLOAT;
				};
				twsi3_pmx_gpio: twsi3_pmx_gpio {
					pinctrl-single,pins = <
						GPIO73 AF0
						GPIO74 AF0
					>;
					MFP_LPM_FLOAT;
				};

				touch_pins: touch_pins {
					pinctrl-single,pins = <
						GPIO72 0x0
						GPIO75 0x0
					>;
					MFP_LPM_FLOAT;
				};

				gnss_pmx_def: gnss_pmx_def {
					pinctrl-single,pins = <
						GPIO81 AF0
						GPIO82 AF0
						GPIO83 AF0
						GPIO84 AF0
						GPIO85 AF0
					>;
					MFP_LPM_PULL_DW;
				};

				gnss_pmx_power_on: gnss_pmx_power_on {
					pinctrl-single,pins = <
						GPIO81 AF6
						GPIO82 AF6
						GPIO83 AF6
						GPIO84 AF6
						GPIO85 AF6
					>;
					MFP_DEFAULT;
				};

				twsi3_pmx_senhb_def: twsi3_pmx_senhb_def {
					pinctrl-single,pins = <
						GPIO73 AF7
						GPIO74 AF7
					>;
					MFP_LPM_FLOAT;
				};

				twsi3_pmx_senhb: twsi3_pmx_senhb {
					pinctrl-single,pins = <
						GPIO73 AF7
						GPIO74 AF7
					>;
					MFP_DEFAULT;
				};

				senhb_irq_pins_def: senhb_irq_pins_def {
					pinctrl-single,pins = <
						GPIO11 AF0
						GPIO91 AF3
					>;
					MFP_DEFAULT;
				};

				gpio10_pull_up: gpio10_pull_up {
					pinctrl-single,pins = <
						GPIO10 AF0
					>;
					MFP_LPM_PULL_UP;
				};

				dvc_pmx_func: dvc_pmx_func {
					pinctrl-single,pins = <
						GPIO93 AF5
						GPIO94 AF5
						GPIO95 AF5
					>;
					MFP_DEFAULT;
				};

				ccic1_pmx_func1: ccic1_pmx_func1 {
					pinctrl-single,pins = <
						GPIO77 AF1
						GPIO67 AF0
						GPIO68 AF0
					>;
					MFP_DEFAULT;
				};

				ccic1_pmx_func3: ccic1_pmx_func3 {
					pinctrl-single,pins = <
						GPIO77 AF1
						GPIO53 AF7
						GPIO54 AF7
					/*	GPIO67 AF5
						GPIO68 AF5 */
					>;
					MFP_LPM_FLOAT;
				};

				ccic1_pmx_func2: ccic1_pmx_func2 {
					pinctrl-single,pins = <
						GPIO77 AF1
						GPIO53 AF2
						GPIO54 AF2
						GPIO67 AF0
						GPIO68 AF0
					>;
					MFP_LPM_FLOAT;
				};

				ccic2_pmx_func1: ccic2_pmx_func1 {
					pinctrl-single,pins = <
						GPIO69 AF0
						GPIO70 AF0
					>;
					MFP_DEFAULT;
				};

				ccic2_pmx_func2: ccic2_pmx_func2 {
					pinctrl-single,pins = <
						/*
						GPIO51 AF7
						GPIO52 AF7
						*/
						GPIO69 AF0
						GPIO70 AF0
					>;
					MFP_LPM_FLOAT;
				};

				ccic2_pmx_func3: cic2_pmx_func3 {
					pinctrl-single,pins = <
						GPIO69 AF0
						GPIO70 AF0
					>;
					MFP_DEFAULT;
				};

			};

			coresight: coresight@d4100000 {
				status = "okay";
			};

			twsi0: i2c@d4011000 {
			/*
				pinctrl-names = "default","gpio";
				pinctrl-0 = <&twsi0_pmx_func>;
				pinctrl-1 = <&twsi0_pmx_gpio>;
				i2c-gpio = <&gpio 53 0 &gpio 54 0>;
			*/
				status = "okay";
		        };

			twsi1: i2c@d4010800 {
				pinctrl-names = "default","gpio";
				pinctrl-0 = <&twsi1_pmx_func>;
				pinctrl-1 = <&twsi1_pmx_gpio>;
				i2c-gpio = <&gpio 87 0 &gpio 88 0>;
				status = "okay";

				touch1: s3202@720p {
					compatible = "synaptics,s3202-touch";
					pinctrl-names = "default"; pinctrl-0 = <&touch_pins>;
					reg = <0x22>;
					interrupt-parent = <&gpio>;
					interrupts = <72 0x1>;
					/* IRQF_ONESHOT | IRQF_TRIGGER_FALLING */
					synaptics,irq-flags =  <0x2002>;
					synaptics,irq-gpios = <&gpio 72 0>;
					synaptics,reset-gpios = <&gpio 75 0>;
					synaptics,sensor_res_x = <720>;
					synaptics,sensor_res_y = <1280>;
					synaptics,sensor_max_x = <798>;
					synaptics,sensor_max_y = <1392>;
					synaptics,sensor_margin_x = <39>;
					synaptics,sensor_margin_y = <0>;
					avdd-supply = <&ldo11>;
					status = "disabled";
				};

				touch2: msg2133@26 {
					compatible = "focaltech,msg2133";
					pinctrl-names = "default"; pinctrl-0 = <&touch_pins>;
					reg = <0x26>;
					interrupt-parent = <&gpio>;
					interrupts = <72 0x1>;
					focaltech,abs-x-max = <480>;
					focaltech,abs-y-max = <854>;
					focaltech,irq-gpios = <&gpio 72 0>;
					focaltech,reset-gpios = <&gpio 75 0>;
					focaltech,v_tsp-supply = <&ldo11>;
					status = "disabled";
				};

				touch3: 88ms100@720p {
					compatible = "marvell,88ms100-touch";
					pinctrl-names = "default"; pinctrl-0 = <&touch_pins>;
					reg = <0x18>;
					interrupt-parent = <&gpio>;
					interrupts = <72 0x1>;
					irq-gpios = <&gpio 72 0>;
					reset-gpios = <&gpio 75 0>;
					marvell,max-height = <1280>;
					marvell,max-width = <720>;
					avdd-supply = <&ldo11>;
					status = "disabled";
				};

				touch4: mstar@26 {
					compatible = "mstar,msg2238";
					pinctrl-names = "default";
					pinctrl-0 = <&touch_pins>;
					reg = <0x26>;
					interrupt-parent = <&gpio>;
					interrupts = <72 0x1>;
					mstar,abs-x-max = <720>;
					mstar,abs-y-max = <1280>;
					mstar,irq-gpios = <&gpio 72 0>;
					mstar,reset-gpios = <&gpio 75 0>;
					mstar,v_tsp-supply = <&ldo11>;
					status = "disabled";
				};
			};

			twsi2: i2c@d4037000 {
				status = "okay";

				pmic0: 88pm886@30 {
					reg = <0x30>;
					interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
					interrupt-parent = <&gic>;
					status = "disabled";

					dvc {
						pinctrl-names = "default";
						pinctrl-0 = <&dvc_pmx_func>;
					};
				};
				pmic2: 88pm860@38 {
					compatible = "marvell,88pm860";
					reg = <0x38>;
					marvell,pmic-type = <1>;
					status = "disabled";

					/* no codec_int currently, comment out now */
					/*
					interrupt-parent = <&gpio>;
					interrupts = <124 0x1>;
					marvell,88pm805-irq-write-clear;
					*/
					pm860_codec: pm860_codec {
						compatible = "marvell,88pm860-codec";
						#dailink-cells = <1>;
					};
				};
			};

			twsi3: i2c@d4013800 {
				pinctrl-names = "default", "gpio";
				pinctrl-0 = <&twsi3_pmx_func>;
				pinctrl-1 = <&twsi3_pmx_gpio>;
				i2c-gpio = <&gpio 73 0 &gpio 74 0>;
				status = "okay";

				sensor1: apds9930@39 {
					compatible = "avago,apds9930";
					reg = <0x39>;
					interrupt-parent = <&gpio>;
					interrupts = <20 0x1>;
					irq-gpios = <&gpio 20 0>;
					avdd-supply = <&ldo4>;
					status = "disabled";
				};

				sensor2: bmi160@68 {
					compatible = "bosch-sensortec,bmi160";
					reg = <0x68>;
					interrupt-parent = <&gpio>;
					interrupts = <91 0x1>;
					irq-gpios = <&gpio 91 0>;
					avdd-supply = <&ldo4>;
					bmi160-place = <2>;
					status = "disabled";
				};

				sensor3: bme280@76 {
					compatible = "bosch-sensortec,bme280";
					reg = <0x76>;
					avdd-supply = <&ldo4>;
					status = "disabled";
				};

				sensor4: icm20628@69 {
					compatible = "invensense,icm20628";
					reg = <0x69>;
					interrupt-parent = <&gpio>;
					interrupts = <91 0x1>;
					inven,irq-gpios = <&gpio 91 0x00>;
					avdd-supply = <&ldo4>;
					axis_map_x = <1>;
					negate_x = <0>;
					axis_map_y = <0>;
					negate_y = <1>;
					axis_map_z = <2>;
					negate_z = <1>;
					inven,secondary_axis_map_x = <1>;
					inven,secondary_negate_x = <0>;
					inven,secondary_axis_map_y = <0>;
					inven,secondary_negate_y = <0>;
					inven,secondary_axis_map_z = <2>;
					inven,secondary_negate_z = <1>;
					inven,secondary_type = "compass";
					inven,secondary_name = "ak09912";
					inven,secondary_reg = <0x0D>;
					status = "disabled";
				};

				sensor5: mxc400x@15 {
					compatible = "memsic,mxc400x";
					reg = <0x15>;
					acdd-supply = <&ldo4>;
					status = "disabled";
                                };

				sensor6: mmc3524x@30 {
					compatible = "memsic,mmc3524x";
					reg = <0x30>;
					acdd-supply = <&ldo4>;
					status = "disabled";
				};

				sensor7: ap3426@1E {
					compatible = "dyna,ap3426";
					reg = <0x1E>;
					interrupt-parent = <&gpio>;
					interrupts = <20 0x1>;
					irq-gpios = <&gpio 20 0>;
					avdd-supply = <&ldo4>;
					status = "disabled";
				};
			};

			/* SSPA port 0 */
			sspa0: sspa@d128dc00 {
				pinctrl-names = "default";
				pinctrl-0 = <&sspa0_func>;
				playback_period_bytes = <4096>;
				playback_buffer_bytes = <16384>;
				capture_period_bytes = <4096>;
				capture_buffer_bytes = <12288>;
				burst_size = <4>;
				#dailink-cells = <1>;
				status = "okay";
			};

			map: map@d1200000 {
				marvell,b0_fix;
				marvell,apll = <1>;
				lpm-qos = <PM_QOS_CPUIDLE_BLOCK_UDR_VCTCXO>;
				status = "okay";
				mmp_map_codec: mmp_map_codec {
					compatible = "marvell,mmp-map-codec";
					#dailink-cells = <1>;
				};
				mmp_map_be: mmp_map_be {
					compatible = "marvell,mmp-map-be";
					pinctrl-names = "default";
					pinctrl-0 = <&sspa1_func>;
					#dailink-cells = <1>;
				};
				mmp_map_be_tdm: mmp_map_be_tdm {
					compatible = "marvell,mmp-map-be-tdm";
					marvell,single-out;
					#dailink-cells = <1>;
				};
			};

			acipc: acipc@d401d000 {
				status = "okay";
			};

			seh: seh@d4080000 {
				status = "okay";
			};

			cp-load {
				status = "okay";
			};
		};

		/*
		 * ramoops:
		 * 256 KB memory starts at 0x8100000
		 * pstore dump: 2 chunks, total 64 KB, 32 KB each
		 * console size: 192 KB
		 * no dump_oops
		 */
		ramoops {
			compatible = "pstore,ramoops";
			mem-size = <0x40000>;
			mem-address = <0x8100000>;
			record-size = <0x8000>;
			console-size = <0x30000>;
			dump-oops = <0>;
			status = "okay";
		};
	};

	mmp_pcm_hostless: mmp_pcm_hostless {
		bus_number = <0>;
		compatible = "marvell,mmp-pcm-hostless";
		#dailink-cells = <1>;
		status = "okay";
	};

	snd_soc_dummy: snd_soc_dummy {
		compatible = "snd-soc-dummy";
		#dailink-cells = <1>;
		status = "okay";
	};

	sound {
		compatible = "marvell,map-card";
		map,dapm-route =
			"ADC input1", "TDM_MIC1_CAP",
			"ADC input2", "TDM_MIC2_CAP",
			"ADC input3", "BT_VC_UL",
			"TDM_OUT1_PLAYBACK", "out1_hs_en",
			"TDM_OUT2_PLAYBACK", "out1_spkr_en",
			"BT_VC_DL", "i2s3_bt_vc";
		fe_i2s1: fe_i2s1 {
			compatible = "marvell,map-dailink-1";
			dai-name = "MAP I2S1 audio";
			stream-name = "map i2s1";
			marvell,cpu-dai = <&sspa0 0>;
			marvell,codec-dai = <&mmp_map_codec 4>;
		};
		fe_i2s3: fe_i2s3 {
			compatible = "marvell,map-dailink-2";
			dai-name = "MAP I2S2 audio";
			stream-name = "map i2s2";
			marvell,cpu-dai = <&mmp_pcm_hostless 0>;
			marvell,codec-dai = <&mmp_map_codec 2>;
			marvell,dai-no-host-mode;
		};
		fe_i2s4: fe_i2s4 {
			compatible = "marvell,map-dailink-7";
			dai-name = "MAP I2S3 audio";
			stream-name = "map i2s3";
			marvell,cpu-dai = <&mmp_pcm_hostless 1>;
			marvell,codec-dai = <&mmp_map_codec 3>;
			marvell,dai-no-host-mode;
		};
		fe_i2s5: fe_i2s5 {
			compatible = "marvell,map-dailink-2";
			dai-name = "MAP I2S5 audio";
			stream-name = "map i2s5";
			marvell,cpu-dai = <&mmp_pcm_hostless 2>;
			marvell,codec-dai = <&mmp_map_codec 5>;
			marvell,dai-dynamic;
			marvell,dai-no-host-mode;
		};
		be_i2s1: be_i2s1 {
			compatible = "marvell,map-dailink-3";
			dai-name = "MAP AUXI2S audio";
			stream-name = "BT audio";
			marvell,cpu-dai = <&mmp_map_be 1>;
			marvell,codec-dai = <&snd_soc_dummy 0>;
			marvell,codec-name = "snd-soc-dummy";
			marvell,codec-dai-name = "snd-soc-dummy-dai";
			marvell,dai-no-pcm;
			marvell,dai-fixup = <0>;
		};
		be_i2s2: be_i2s2 {
			compatible = "marvell,map-dailink-6";
			dai-name = "MAP TDM hs audio";
			stream-name = "codec hs audio";
			marvell,cpu-dai = <&mmp_map_be_tdm 1>;
			marvell,codec-dai = <&pm860_codec 3>;
			marvell,playback-only;
			marvell,dai-no-pcm;
			marvell,dai-fixup = <1>;
		};
		be_i2s3: be_i2s3 {
			compatible = "marvell,map-dailink-4";
			dai-name = "MAP TDM speaker audio";
			stream-name = "codec speaker audio";
			marvell,cpu-dai = <&mmp_map_be_tdm 2>;
			marvell,codec-dai = <&pm860_codec 4>;
			marvell,playback-only;
			marvell,dai-no-pcm;
			marvell,dai-fixup = <1>;
		};
		be_i2s4: be_i2s4 {
			compatible = "marvell,map-dailink-5";
			dai-name = "MAP TDM mic1 audio";
			stream-name = "codec mic1 audio";
			marvell,cpu-dai = <&mmp_map_be_tdm 3>;
			marvell,codec-dai = <&pm860_codec 1>;
			marvell,capture-only;
			marvell,dai-no-pcm;
		};
		be_i2s5: be_i2s5 {
			compatible = "marvell,map-dailink-5";
			dai-name = "MAP TDM mic2 audio";
			stream-name = "codec mic2 audio";
			marvell,cpu-dai = <&mmp_map_be_tdm 4>;
			marvell,codec-dai = <&pm860_codec 2>;
			marvell,capture-only;
			marvell,dai-no-pcm;
		};
	};

	ion {
		marvell,ion-nr = <2>;
		status = "okay";
		marvell,ion-iommu = <1>;
		marvell,power-domain = <&pd_smmu>;
		heap1 {
			marvell,ion-name = "carveout_heap";
			marvell,ion-type = <2>;
			marvell,ion-id = <2>;
			marvell,ion-base = <0>;
			marvell,ion-size = <0>;
		};
		heap2 {
			marvell,ion-name = "system_heap";
			marvell,ion-type = <0>;
			marvell,ion-id = <0>;
		};
	};

	sd8xxx-wlan {
		drv_mode = <0x5>;
		cfg80211_wext = <0xc>;
		sta_name = "wlan";
		wfd_name = "p2p";
		max_vir_bss = <1>;
		drvdbg = <0x80007>;
		dev_cap_mask = <0xffffcfff>;
		init_cfg = "mrvl/wifi_init_cfg.conf";
		txpwrlimit_cfg = "mrvl/txpwrlimit_cfg.bin";
		cal_data_cfg = "mrvl/WlanCalData_ext.conf";
		reg_alpha2 = "US";
		p2p_enh = <1>;
	};

	sd8xxx-bt {
		init_cfg = "mrvl/bt_init_cfg.conf";
	};

	mmp_m3_1: apsenhb {
		compatible = "marvell,mmp-m3";
		pmicver = <2>;
		/* 950000 for CM3 on, 700000 for CM3 off */
		vccmain = <950000 700000>;
		vm3pwr-supply = <&ldo3>;
		antpwr-supply = <&ldo4>;
		vccmain-supply = <&buck1slp>;

		pinctrl-names = "default", "poweron";
		pinctrl-0 = <&gnss_pmx_def &gpio10_pull_up>;
		pinctrl-1 = <&gnss_pmx_power_on>;
		status = "okay";
	};

	mmp_m3_2: cm3senhb {
		compatible = "marvell,mmp-m3";
		pmicver = <2>;
		/* 950000 for CM3 on, 700000 for CM3 off */
		vccmain = <950000 700000>;
		vm3pwr-supply = <&ldo3>;
		antpwr-supply = <&ldo4>;
		senpwr-supply = <&ldo4>;
		vccmain-supply = <&buck1slp>;

		pinctrl-names = "default", "poweron";
		pinctrl-0 = <&gnss_pmx_def &twsi3_pmx_senhb_def &senhb_irq_pins_def
				&gpio10_pull_up>;
		pinctrl-1 = <&gnss_pmx_power_on &twsi3_pmx_senhb>;
		status = "okay";
	};

	tzdd {
		status = "okay";
	};

	dip {
		compatible = "marvell,simple-dip";
		clocks = <&soc_clocks PXA1U88_CLK_CPU>,
				<&soc_clocks PXA1U88_CLK_DDR>;
		clock-names = "cpu", "ddr";
	};

	iml: iml@7ffffe0{
		status = "okay";
	};

	mmplog {
		status = "okay";
		mmplog-base = <0x08000000>;
		mmplog-size = <0x100000>;
	};
};