Cleaning up QCom Binariesbrillo-m7-release

TESTING: Built, provisioned, ran ledflasher
BUG: 25352888
Change-Id: I35bec1a69b8a93c15fc93c8d55f530a95beb5f6e
(cherry picked from commit 584456b6754e161b8aa51b93e7cac240dc989b9a)

3 files changed, 0 insertions, 577 deletions

diff --git a/drivers/staging/prima/Android.mk b/drivers/staging/prima/Android.mk
deleted file mode 100644
index 60cb1321a8c..00000000000
--- a/drivers/staging/prima/Android.mk
+++ /dev/null
@@ -1,115 +0,0 @@
-# Android makefile for the WLAN Module
-
-# Assume no targets will be supported
-WLAN_CHIPSET :=
-
-# Build/Package options for 8960 target
-ifeq ($(TARGET_BOARD_PLATFORM),msm8960)
-WLAN_CHIPSET := prima
-WLAN_SELECT := CONFIG_PRIMA_WLAN=m
-endif
-
-# Build/Package options for 8916, 8974, 8226, 8610, 8909 targets
-ifneq (,$(filter msm8916 msm8974 msm8226 msm8610 msm8909,$(TARGET_BOARD_PLATFORM)))
-
-WLAN_CHIPSET := pronto
-WLAN_SELECT := CONFIG_PRONTO_WLAN=m
-endif
-
-# Build/Package only in case of supported target
-ifneq ($(WLAN_CHIPSET),)
-
-LOCAL_PATH := $(call my-dir)
-
-# This makefile is only for DLKM
-ifneq ($(findstring vendor,$(LOCAL_PATH)),)
-
-# Determine if we are Proprietary or Open Source
-ifneq ($(findstring opensource,$(LOCAL_PATH)),)
-    WLAN_PROPRIETARY := 0
-else
-    WLAN_PROPRIETARY := 1
-endif
-
-ifeq ($(WLAN_PROPRIETARY),1)
-    WLAN_BLD_DIR := vendor/qcom/proprietary/wlan
-else
-    WLAN_BLD_DIR := vendor/qcom/opensource/wlan
-endif
-
-# DLKM_DIR was moved for JELLY_BEAN (PLATFORM_SDK 16)
-ifeq (1,$(filter 1,$(shell echo "$$(( $(PLATFORM_SDK_VERSION) >= 16 ))" )))
-       DLKM_DIR := $(TOP)/device/qcom/common/dlkm
-else
-       DLKM_DIR := build/dlkm
-endif
-
-# Copy WCNSS_cfg.dat file from firmware_bin/ folder to target out directory.
-ifeq ($(WLAN_PROPRIETARY),0)
-
-$(shell mkdir -p $(TARGET_OUT_ETC)/firmware/wlan/prima)
-$(shell rm -f $(TARGET_OUT_ETC)/firmware/wlan/prima/WCNSS_cfg.dat)
-$(shell cp $(LOCAL_PATH)/firmware_bin/WCNSS_cfg.dat $(TARGET_OUT_ETC)/firmware/wlan/prima)
-
-else
-
-include $(CLEAR_VARS)
-LOCAL_MODULE       := WCNSS_qcom_wlan_nv.bin
-LOCAL_MODULE_TAGS  := optional
-LOCAL_MODULE_CLASS := ETC
-LOCAL_MODULE_PATH  := $(PRODUCT_OUT)/persist
-LOCAL_SRC_FILES    := firmware_bin/$(LOCAL_MODULE)
-include $(BUILD_PREBUILT)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE       := WCNSS_cfg.dat
-LOCAL_MODULE_TAGS  := optional
-LOCAL_MODULE_CLASS := ETC
-LOCAL_MODULE_PATH  := $(TARGET_OUT_ETC)/firmware/wlan/prima
-LOCAL_SRC_FILES    := firmware_bin/$(LOCAL_MODULE)
-include $(BUILD_PREBUILT)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE       := WCNSS_qcom_cfg.ini
-LOCAL_MODULE_TAGS  := optional
-LOCAL_MODULE_CLASS := ETC
-LOCAL_MODULE_PATH  := $(PRODUCT_OUT)/persist
-LOCAL_SRC_FILES    := firmware_bin/$(LOCAL_MODULE)
-include $(BUILD_PREBUILT)
-
-endif
-
-# Build wlan.ko as either prima_wlan.ko or pronto_wlan.ko
-###########################################################
-
-# This is set once per LOCAL_PATH, not per (kernel) module
-KBUILD_OPTIONS := WLAN_ROOT=../$(WLAN_BLD_DIR)/prima
-# We are actually building wlan.ko here, as per the
-# requirement we are specifying <chipset>_wlan.ko as LOCAL_MODULE.
-# This means we need to rename the module to <chipset>_wlan.ko
-# after wlan.ko is built.
-KBUILD_OPTIONS += MODNAME=wlan
-KBUILD_OPTIONS += BOARD_PLATFORM=$(TARGET_BOARD_PLATFORM)
-KBUILD_OPTIONS += $(WLAN_SELECT)
-
-
-VERSION=$(shell grep -w "VERSION =" $(TOP)/kernel/Makefile | sed 's/^VERSION = //' )
-PATCHLEVEL=$(shell grep -w "PATCHLEVEL =" $(TOP)/kernel/Makefile | sed 's/^PATCHLEVEL = //' )
-
-include $(CLEAR_VARS)
-LOCAL_MODULE              := $(WLAN_CHIPSET)_wlan.ko
-LOCAL_MODULE_KBUILD_NAME  := wlan.ko
-LOCAL_MODULE_TAGS         := debug
-LOCAL_MODULE_DEBUG_ENABLE := true
-LOCAL_MODULE_PATH         := $(TARGET_OUT)/lib/modules/$(WLAN_CHIPSET)
-include $(DLKM_DIR)/AndroidKernelModule.mk
-###########################################################
-
-#Create symbolic link
-$(shell mkdir -p $(TARGET_OUT)/lib/modules; \
-        ln -sf /system/lib/modules/$(WLAN_CHIPSET)/$(WLAN_CHIPSET)_wlan.ko \
-               $(TARGET_OUT)/lib/modules/wlan.ko)
-
-endif # DLKM check
-
-endif # supported target check
diff --git a/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat b/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat
deleted file mode 100644
index 0637816b823..00000000000
--- a/drivers/staging/prima/firmware_bin/WCNSS_cfg.dat
+++ /dev/null
diff --git a/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini b/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini
deleted file mode 100644
index f86f9e1e493..00000000000
--- a/drivers/staging/prima/firmware_bin/WCNSS_qcom_cfg.ini
+++ /dev/null
@@ -1,462 +0,0 @@
-# This file allows user to override the factory
-
-# defaults for the WLAN Driver
-
-
-# Enable IMPS or not
-gEnableImps=1
-
-# Enable/Disable Idle Scan
-
-gEnableIdleScan=0
-
-
-# Enable/Disable vsta based on MAX Assoc limit
-gEnableVSTASupport=1
-
-
-# Increase sleep duration (seconds) during IMPS
-# 0 implies no periodic wake up from IMPS. Periodic wakeup is
-# unnecessary if Idle Scan is disabled.
-gImpsModSleepTime=0
-
-
-# Enable BMPS or not
-gEnableBmps=1
-
-# Enable suspend or not
-
-# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
-
-gEnableSuspend=3
-
-# Phy Mode (auto, b, g, n, etc)
-# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
-gDot11Mode=0
-
-
-# CSR Roaming Enable(1) Disable(0)
-
-gRoamingTime=0
-
-
-# Assigned MAC Addresses - This will be used until NV items are in place
-
-# Each byte of MAC address is represented in Hex format as XX
-
-Intf0MacAddress=000AF58989FF
-Intf1MacAddress=000AF58989FE
-Intf2MacAddress=000AF58989FD
-
-Intf3MacAddress=000AF58989FC
-
-
-# UAPSD service interval for VO,VI, BE, BK traffic
-
-InfraUapsdVoSrvIntv=0
-
-InfraUapsdViSrvIntv=0
-
-InfraUapsdBeSrvIntv=0
-
-InfraUapsdBkSrvIntv=0
-
-# Flag to allow STA send AddTspec even when ACM is Off
-gAddTSWhenACMIsOff=1
-
-# Make 1x1 the default antenna configuration
-
-gNumRxAnt=1
-
-
-# Beacon filtering frequency (unit in beacon intervals)
-
-gNthBeaconFilter=50
-
-
-# Enable WAPI or not
-
-# WAPIIsEnabled=0
-
-
-# Flags to filter Mcast abd Bcast RX packets.
-
-# Value 0: No filtering, 1: Filter all Multicast.
-
-# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
-
-McastBcastFilter=3
-
-
-#Flag to enable HostARPOffload feature or not
-
-hostArpOffload=1
-
-
-#Flag to enable HostNSOffload feature or not
-
-hostNSOffload=0
-
-#SoftAP Related Parameters
-
-# AP MAc addr
-
-gAPMacAddr=000AF589dcab
-
-
-# 802.11n Protection flag
-
-gEnableApProt=1
-
-
-#Enable OBSS protection
-
-gEnableApOBSSProt=1
-
-
-#Enable/Disable UAPSD for SoftAP
-
-gEnableApUapsd=1
-
-
-# Fixed Rate
-
-gFixedRate=0
-
-
-# Maximum Tx power
-
-# gTxPowerCap=30
-
-
-# Fragmentation Threshold
-
-# gFragmentationThreshold=2346
-
-
-# RTS threshold
-
-RTSThreshold=2347
-
-
-# Intra-BSS forward
-
-gDisableIntraBssFwd=0
-
-
-# WMM Enable/Disable
-
-WmmIsEnabled=0
-
-
-# 802.11d support
-
-g11dSupportEnabled=1
-
-# 802.11h support
-
-g11hSupportEnabled=1
-
-# ESE Support and fast transition
-EseEnabled=0
-ImplicitQosIsEnabled=0
-gNeighborScanTimerPeriod=200
-
-gNeighborLookupThreshold=76
-gNeighborReassocThreshold=81
-
-gNeighborScanChannelMinTime=20
-gNeighborScanChannelMaxTime=30
-gMaxNeighborReqTries=3
-
-# Legacy (non-ESE, non-802.11r) Fast Roaming Support
-# To enable, set FastRoamEnabled=1
-# To disable, set FastRoamEnabled=0
-FastRoamEnabled=1
-
-#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
-#Checking is disabled if set to Zero.Otherwise it will use this value as to how better 
-#the RSSI of the new/roamable AP should be for roaming
-RoamRssiDiff=3
-
-# If the RSSI of any available candidate is better than currently associated
-# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
-# registering for reassoc threshold).
-# NOTE: Value of 0 means that we would register for reassoc threshold.
-gImmediateRoamRssiDiff=10
-
-# To enable, set gRoamIntraBand=1 (Roaming within band)
-# To disable, set gRoamIntraBand=0 (Roaming across band)
-
-gRoamIntraBand=0
-
-#SAP Country code
-
-# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
-
-# Example
-
-#   US Indoor, USI
-
-#   Korea Outdoor, KRO
-
-#   Japan without optional byte, JP
-
-#   France without optional byte, FR
-
-#gAPCntryCode=USI
-
-
-#Short Guard Interval Enable/disable
-
-gShortGI20Mhz=1
-
-gShortGI40Mhz=1
-
-
-#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
-
-gAPAutoShutOff=0
-
-
-# SAP auto channel selection configuration
-
-# 0 = disable auto channel selection
-
-# 1 = enable auto channel selection, channel provided by supplicant will be ignored
-
-gApAutoChannelSelection=1
-
-
-# Listen Energy Detect Mode Configuration
-
-# Valid values 0-128
-
-# 128 means disable Energy Detect feature
-
-# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
-
-# 10-128 are reserved.
-
-# The EDET threshold mapping is as follows in 3dB step:
-
-# 0 = -60 dBm
-
-# 1 = -63 dBm
-
-# 2 = -66 dBm
-
-# ...
-
-# 7 = -81 dBm
-
-# 8 = -84 dBm
-
-# 9 = -87 dBm
-
-# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
-
-#
-
-#  Range Loss  (dB)  =  EDET threshold level (dBm) + 97 dBm.
-
-#
-
-gEnablePhyAgcListenMode=128
-
-
-#Preferred channel to start BT AMP AP mode (0 means, any channel)
-
-BtAmpPreferredChannel=0
-
-
-#Preferred band (both or 2.4 only or 5 only)
-
-BandCapability=0
-
-
-#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
-
-enableBeaconEarlyTermination=0
-
-beaconEarlyTerminationWakeInterval=3
-
-
-#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
-
-gEnableBtAmp=0
-
-
-#SOFTAP Channel Range selection 
-
-gAPChannelSelectStartChannel=1
-
-gAPChannelSelectEndChannel=11
-
-
-#SOFTAP Channel Range selection Operating band
-
-# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
-
-gAPChannelSelectOperatingBand=0
-
-
-#Channel Bonding
-gChannelBondingMode5GHz=1
-gChannelBondingMode24GHz=1
-
-#Enable Keep alive with non-zero period value
-
-#gStaKeepAlivePeriod = 30
-
-#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
-#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
-#For both active and power save clients.
-
-#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
-#If doesn't honor for 5 seconds then DUT remove client.
-
-#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
-#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
-#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
-
-#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
-#where we send NULL frame.
-
-#gApLinkMonitorPeriod = 10
-
-#gGoLinkMonitorPeriod = 10
-
-#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
-#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
-
-
-gGoKeepAlivePeriod=30
-
-gApKeepAlivePeriod=10
-
-
-#If set will start with active scan after driver load, otherwise will start with
-
-#passive scan to find out the domain
-
-gEnableBypass11d=1
-
-
-#If set to 0, will not scan DFS channels
-
-gEnableDFSChnlScan=1
-
-
-gVhtChannelWidth=2
-gEnableLogp=1
-
-
-# Enable Automatic Tx Power control
-
-gEnableAutomaticTxPowerControl=0
-
-# 0 for OLPC 1 for CLPC and SCPC
-gEnableCloseLoop=1
-
-#Data Inactivity Timeout when in powersave (in ms)
-gDataInactivityTimeout=200
-
-# VHT Tx/Rx MCS values
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gVhtRxMCS=2
-gVhtTxMCS=2
-
-# Enable CRDA regulatory support by settings default country code
-#gCrdaDefaultCountryCode=TW
-
-# Scan Timing Parameters
-# gPassiveMaxChannelTime=110
-# gPassiveMinChannelTime=60
-# gActiveMaxChannelTime=40
-# gActiveMinChannelTime=20
-
-#If set to 0, MCC is not allowed.
-gEnableMCCMode=1
-
-# 1=enable STBC; 0=disable STBC 
-gEnableRXSTBC=1
-
-# Enable Active mode offload
-gEnableActiveModeOffload=1
-
-#Enable Scan Results Aging based on timer 
-#Timer value is in seconds
-#If Set to 0 it will not enable the feature
-gScanAgingTime=0
-
-#Enable Power saving mechanism Based on Android Framework
-#If set to 0 Driver internally control the Power saving mechanism
-#If set to 1 Android Framwrok control the Power saving mechanism
-isAndroidPsEn=0
-
-#disable LDPC in STA mode if the AP is TXBF capable
-gDisableLDPCWithTxbfAP=1
-
-#Enable thermal mitigation
-gThermalMitigationEnable=1
-
-gEnableFastRoamInConcurrency=1
-
-#List of Country codes for which 11ac needs to be disabled
-#Each country code must be delimited by comma(,)
-gListOfNon11acCountryCode=RU,UA,ZA
-
-#Maxium Channel time in msec
-gMaxMediumTime = 5480
-
-# 802.11K support
-gRrmEnable=1
-gRrmOperChanMax=8
-gRrmNonOperChanMax=8
-gRrmRandIntvl=100
-
-#Scan offload
-gEnableDirectedScanOffload=0
-
-#FlexConnect Power Factor
-#Default is set to 0 (disable)
-gFlexConnectPowerFactor=0
-
-#SAP/P2P-GO mode traffic monitor
-gEnableTrafficMonitor=1
-gTrafficIdleTimeout=3000
-
-#Disable/Enable Strict FCC Regulatory
-# 0 to disable, 1 to enable
-gEnableStrictRegulatoryForFCC=1
-
-#Enable/Disable Modulated DTIM feature
-gEnableModulatedDTIM=3
-
-#max LI value for modulated DTIM
-gMaxLIModulatedDTIM=3
-
-#Enable/Disable Link Layer Statistics Feature
-gEnableLLStats=1
-
-#Enable/Disable EXTScan Feature
-gEnableEXTScan=1
-
-#Enable/Disable RTS-CTS for HT,VHT
-#Bit mask value to enable RTS/CTS for different modes
-#For 2.4 GHz, HT20 - 0x0001 i.e 1, for 2.4 GHz, HT40 - 0x0002 i.e 2
-#For 2.4 GHz, VHT20 - 0x0004 i.e 4, for 2.4 GHz, VHT40 - 0x0008 i.e 8
-#For 5 GHz, HT20 - 0x0100 i.e 256, for 5 GHz, HT40 - 0x0200 i.e 512
-#For 5 GHz, VHT20 - 0x0400 i.e 1024, for 5 GHz, VHT40 - 0x0800 i.e 2048
-#For 5 GHz, VHT80 - 0x1000 i.e 4096
-#Can be enabled for multiple modes
-#For enabling in both HT20 and HT40 of 2.4 GHz - 0x0003 i.e 3
-#Default is set to 0 (disable)
-gEnableRtsCtsHtVht=0
-
-END
-
-# Note: Configuration parser would not read anything past the END marker
-