Snap for 9367323 from 52b7165a3c8580dc5c8c584477af2cd634cf33a0 to tm-qpr2-releaseandroid-13.0.0_r49android-13.0.0_r45android-13.0.0_r44android-13.0.0_r43android-13.0.0_r42android-13.0.0_r41android-13.0.0_r40android-13.0.0_r39android-13.0.0_r38android-13.0.0_r37android-13.0.0_r36android-13.0.0_r35android-13.0.0_r34android-13.0.0_r33android-13.0.0_r32android13-qpr2-s9-releaseandroid13-qpr2-s8-releaseandroid13-qpr2-s7-releaseandroid13-qpr2-s6-releaseandroid13-qpr2-s5-releaseandroid13-qpr2-s3-releaseandroid13-qpr2-s2-releaseandroid13-qpr2-s12-releaseandroid13-qpr2-s11-releaseandroid13-qpr2-s10-releaseandroid13-qpr2-s1-releaseandroid13-qpr2-releaseandroid13-qpr2-b-s1-release

Change-Id: Iffcbec0c5e5984c327422d5711d6228e1eafe85e

3 files changed, 1065 insertions, 3 deletions

diff --git a/wcn6740/qcwcn/wifi_hal/qca-vendor_copy.h b/wcn6740/qcwcn/wifi_hal/qca-vendor_copy.h
index f56e645..1faccff 100644
--- a/wcn6740/qcwcn/wifi_hal/qca-vendor_copy.h
+++ b/wcn6740/qcwcn/wifi_hal/qca-vendor_copy.h
@@ -871,6 +871,45 @@ enum qca_radiotap_vendor_ids {
  *
  *	The attributes used with this command are defined in
  *	enum qca_wlan_vendor_attr_sar_capability.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SR: Subcommand used to implement Spatial Reuse
+ *	(SR) feature. This command is used by userspace to configure SR
+ *	parameters to the driver and to get the SR related parameters and
+ *	statistics with synchronous responses from the driver.
+ *	The driver also uses this command to send asynchronous events to
+ *	userspace to indicate suspend/resume of SR feature and changes
+ *	in SR parameters.
+ *
+ *	The attributes used with this command are defined in
+ *	enum qca_wlan_vendor_attr_sr.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT: Subcommand used to
+ *	notify application layer about the primary netdev of an MLO connection.
+ *	In some implementations, MLO has multiple netdevs out of which one
+ *	netdev is designated as primary to provide a unified interface to the
+ *	bridge. In those implementations this event is sent on every MLO peer
+ *	connection.
+ *
+ *	The attributes used with this event are defined in
+ *	enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AFC_EVENT: This vendor command is used by the
+ *	driver to notify different AFC events to userspace. The attributes used
+ *	with this command are defined in enum qca_wlan_vendor_attr_afc_event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AFC_RESPONSE: This vendor command is used by
+ *	userspace to deliver AFC response data to driver. The attributes used
+ *	with this command are defined in enum qca_wlan_vendor_attr_afc_response.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DOZED_AP: Subcommand to configure AP interface to
+ *	operate in doze mode.
+ *
+ *	Userspace uses this command to configure the AP interface to enter or
+ *	exit from doze mode. The driver sends this event after it enters or
+ *	exits the doze mode with the updated AP doze mode settings.
+ *
+ *	The attributes used with this subcommand are defined in
+ *	enum qca_wlan_vendor_attr_dozed_ap.
  */
 enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -1074,6 +1113,11 @@ enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_COAP_OFFLOAD = 217,
 	QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG = 218,
 	QCA_NL80211_VENDOR_SUBCMD_GET_SAR_CAPABILITY = 219,
+	QCA_NL80211_VENDOR_SUBCMD_SR = 220,
+	QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT = 221,
+	QCA_NL80211_VENDOR_SUBCMD_AFC_EVENT = 222,
+	QCA_NL80211_VENDOR_SUBCMD_AFC_RESPONSE = 223,
+	QCA_NL80211_VENDOR_SUBCMD_DOZED_AP = 224,
 };
 
 /* Compatibility defines for previously used subcmd names.
@@ -2674,6 +2718,14 @@ enum qca_wlan_vendor_attr_config {
 	 * Set the value to QCA_WLAN_AC_BK if the QoS upgrade needs to be
 	 * disabled, as BK is of the lowest priority and an upgrade to it does
 	 * not result in any changes for the frames.
+	 *
+	 * If only UDP frames of BE or BK access category needs to be upgraded
+	 * without changing the access category of VO or VI UDP frames, refer to
+	 * attribute QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE_FOR_BE_BK.
+	 *
+	 * This attribute is not recommended to be used as it blindly forces all
+	 * UDP packets to a higher access category which could impact the
+	 * traffic pattern of all apps using UDP and can cause unknown behavior.
 	 */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE = 72,
 
@@ -2799,6 +2851,51 @@ enum qca_wlan_vendor_attr_config {
 	 */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_DBAM = 83,
 
+	/* 8-bit unsigned value. This attribute takes the QoS/access category
+	 * value represented by the enum qca_wlan_ac_type and expects the driver
+	 * to upgrade the UDP frames of BE or BK access category to this access
+	 * category. This attribute will not modify UDP frames of VO or VI
+	 * access category. The value of QCA_WLAN_AC_ALL is invalid for this
+	 * attribute.
+	 *
+	 * This will override the DSCP value configured in the frame with the
+	 * intention to only upgrade the access category. That said, it is not
+	 * intended to downgrade the access category for the frames.
+	 * Set the value to QCA_WLAN_AC_BK if the QoS upgrade needs to be
+	 * disabled, as BK is of the lowest priority and an upgrade to it does
+	 * not result in any changes for the frames.
+	 *
+	 * This attribute behavior is similar to
+	 * QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE with the difference that
+	 * only UDP frames of BE or BK access category are upgraded and not
+	 * UDP frames of VI or VO access category.
+	 *
+	 * This attribute is not recommended to be used as it blindly forces all
+	 * UDP packets of BE or BK access category to a higher access category
+	 * which could impact the traffic pattern of all apps using UDP and can
+	 * cause unknown behavior.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE_FOR_BE_BK = 84,
+
+	/* 8-bit unsigned value to configure the driver to enable/disable the
+	 * periodic sounding for Tx beamformer functionality. The default
+	 * behavior uses algorithm to do sounding based on packet stats.
+	 *
+	 * 0 - Default behavior.
+	 * 1 - Enable the periodic sounding for Tx beamformer.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_BEAMFORMER_PERIODIC_SOUNDING = 85,
+
+	/* 8-bit unsigned value, whenever wifi calling (wfc) begins or ends,
+	 * userspace sends this information to the driver/firmware to configure
+	 * wfc state. The driver/firmware uses this information to
+	 * optimize power savings, rate adaption, roaming, etc.
+	 *
+	 * 1 - wfc is on.
+	 * 0 - wfc is off.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_WFC_STATE = 86,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -5076,6 +5173,42 @@ enum qca_vendor_attr_roam_candidate_selection_criteria {
  *	If the current RX link speed is above the threshold, roaming is not
  *	needed. If this attribute is not configured, or if it is set to 0, the
  *	driver will not consider the RX link speed in the roaming decision.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_HO_DELAY_FOR_RX: u16 value in milliseconds.
+ *	Optional parameter. This configuration delays hand-off by the
+ *	specified duration to receive pending RX frames from the current BSS.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_NO_REUSE_PARTIAL_SCAN_FREQ: Unsigned 8-bit
+ *	value.
+ *	During the roam scan, if there are no desired APs found in the partial
+ *	frequency list, an immediate full scan on all the supported frequencies
+ *	is initiated as a fallback. This flag controls the frequency list
+ *	creation for the full scan on the following lines.
+ *	1 - Full scan to exclude the frequencies that were already scanned by
+ *	    the previous partial scan.
+ *	0 - Full scan to include all the supported frequencies irrespective of
+ *	    the ones part of the earlier partial scan.
+ *	If this flag is not specified, a full scan shall include all the
+ *	supported frequencies irrespective of the ones part of an earlier
+ *	partial scan.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_6GHZ_ONLY_ON_PRIOR_DISCOVERY: Unsigned 8-bit
+ *	value.
+ *	During the roam scan, if there are no desired APs found in the partial
+ *	frequency list, an immediate full scan on all the supported frequencies
+ *	is initiated as a fallback. This full scan would add the 2.4/5/6 GHz
+ *	frequencies, including all PSC frequencies by default. This attribute
+ *	controls the inclusion of the 6 GHz PSC frequencies for the full scan
+ *	as following.
+ *	1 - Full scan to include the supported 6 GHz PSC frequencies only on the
+ *	   prior discovery of any 6 GHz frequency support in the environment.
+ *	   This discovery can happen through a prior RNR, 11k neighbor
+ *	request, 11v BTM request, host scan, etc.
+ *	0 - Default behavior. Full scan to include all the supported 6 GHz
+ *	   PSC frequencies regardless of whether 6 GHz BSSs have been
+ *	   discovered.
+ *	The default behavior if this flag is not specified is to include all
+ *	the supported 6 GHz PSC frequencies in the roam full scan.
  */
 enum qca_vendor_attr_roam_control {
 	QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
@@ -5102,6 +5235,9 @@ enum qca_vendor_attr_roam_control {
 	QCA_ATTR_ROAM_CONTROL_SCAN_6G_PSC_DWELL_TIME = 22,
 	QCA_ATTR_ROAM_CONTROL_SCAN_6G_NON_PSC_DWELL_TIME = 23,
 	QCA_ATTR_ROAM_CONTROL_LINKSPEED_THRESHOLD = 24,
+	QCA_ATTR_ROAM_CONTROL_HO_DELAY_FOR_RX = 25,
+	QCA_ATTR_ROAM_CONTROL_FULL_SCAN_NO_REUSE_PARTIAL_SCAN_FREQ = 26,
+	QCA_ATTR_ROAM_CONTROL_FULL_SCAN_6GHZ_ONLY_ON_PRIOR_DISCOVERY = 27,
 
 	/* keep last */
 	QCA_ATTR_ROAM_CONTROL_AFTER_LAST,
@@ -5919,7 +6055,7 @@ enum qca_wlan_vendor_channel_prop_flags {
 	/* HE 40 with extension channel below */
 	QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS     = 1 << 30,
 	/* HE 40 intolerant */
-	QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL     = 1 << 31,
+	QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL     = 1U << 31,
 };
 
 /**
@@ -6005,6 +6141,22 @@ enum qca_wlan_vendor_external_acs_event_chan_info_attr {
 	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11,
 
 	/*
+	 * Segment 0 in MHz (u32).
+	 *
+	 * For 20/40/80 MHz bandwidth, this indicates the channel center
+	 * frequency index for the 20/40/80 MHz operating channel.
+	 * For 160 MHz bandwidth, this indicates the channel center
+	 * frequency of the primary 80 MHz channel.
+	 * For 320 MHz bandwidth, indicates the channel center frequency
+	 * of the primary 160 MHz channel.
+	 *
+	 * To maintain backward compatibility,
+	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+	 * is also maintained.
+	 */
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_0 = 12,
+	/* Legacy alias for the Segment 0 attribute.
+	 *
 	 * VHT segment 0 in MHz (u32) and the attribute is mandatory.
 	 * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
 	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
@@ -6022,9 +6174,25 @@ enum qca_wlan_vendor_external_acs_event_chan_info_attr {
 	 * is still used if either of the driver or user space application
 	 * doesn't support the 6 GHz band.
 	 */
-	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 = 12,
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 =
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_0,
 
 	/*
+	 * Segment 1 in MHz (u32).
+	 *
+	 * For 20/40/80 MHz bandwidth, this is set to 0.
+	 * For 160 MHz bandwidth, indicates the channel center frequency of the
+	 * 160 MHz channel.
+	 * For 320 MHz bandwidth, indicates the channel center frequency of the
+	 * 320 MHz channel.
+	 *
+	 * To maintain backward compatibility,
+	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+	 * is also maintained.
+	 */
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_1 = 13,
+	/* Legacy alias for the Segment 1 attribute.
+	 *
 	 * VHT segment 1 in MHz (u32) and the attribute is mandatory.
 	 * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
 	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
@@ -6042,7 +6210,8 @@ enum qca_wlan_vendor_external_acs_event_chan_info_attr {
 	 * is still used if either of the driver or user space application
 	 * doesn't support the 6 GHz band.
 	 */
-	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 = 13,
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 =
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_1,
 
 	/*
 	 * 16-bit attribute of bits indicating the AP power modes supported by
@@ -6059,6 +6228,33 @@ enum qca_wlan_vendor_external_acs_event_chan_info_attr {
 	 * qca_wlan_vendor_external_acs_event_chan_power_info_attr.
 	 */
 	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_POWER_INFO_ATTR	= 15,
+	/*
+	 * This indicates the overlapping 320 MHz center frequency in MHz
+	 * (u32), if the given primary channel supports more than one
+	 * 320 MHz channel bonding.
+	 *
+	 * Example:
+	 * For 6 GHz, channel frequency 6115 MHz (channel number 33) segment 0
+	 * center frequency (primary 160 MHz) is 6185 MHz and there can be two
+	 * possible segment 2 frequencies for this (320 MHz center
+	 * frequencies):
+	 *
+	 * 1) Center frequency 6105 MHz (channel 31): 320 MHz channel bonding
+	 *    from frequency 5945 MHz - 6265 MHz
+	 * 2) Center frequency 6265 MHz (channel 63): 320 MHz channel bonding
+	 *    from frequency 6105 MHz - 6425 MHz
+	 *
+	 * In this case,
+	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_0 will
+	 * return 6185 MHz.
+	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_SEG_1 will
+	 * return 6105 MHz.
+	 * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_OVERLAP_SEG_1
+	 * will return 6265 MHz.
+	 */
+	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_OVERLAP_SEG_1
+									= 16,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
 	QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
@@ -6311,6 +6507,11 @@ enum qca_wlan_vendor_attr_external_acs_event {
  * VHT seg1 channel frequency in MHz
  * Note: If user-space application has no support of the 6 GHz band, this
  * attribute is optional.
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_PUNCTURE_BITMAP: Required (u16)
+ * Puncture Bitmap for selected primary channel. Optional if no support
+ * for EHT (IEEE 802.11be). Encoding for this attribute follows the
+ * convention used in the Disabled Subchannel Bitmap field of the EHT Operation
+ * element.
  */
 enum qca_wlan_vendor_attr_external_acs_channels {
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
@@ -6346,6 +6547,7 @@ enum qca_wlan_vendor_attr_external_acs_channels {
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY = 11,
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 = 12,
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 = 13,
+	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_PUNCTURE_BITMAP = 14,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
@@ -8839,6 +9041,16 @@ enum qca_wlan_vendor_attr_wifi_test_config {
 	 */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_11BE_EMLSR_MODE = 58,
 
+	/* 8-bit unsigned value to configure the driver to enable/disable the
+	 * periodic sounding for Tx beamformer functionality. The default
+	 * behavior uses algorithm to do sounding based on packet stats.
+	 *
+	 * 0 - Default behavior.
+	 * 1 - Enable the periodic sounding for Tx beamformer.
+	 * This attribute is used for testing purposes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BEAMFORMER_PERIODIC_SOUNDING = 59,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -9551,6 +9763,14 @@ enum qca_wlan_vendor_attr_twt_resume {
  * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF: Optional (u64)
  * This field contains absolute TSF value of the time at which the TWT
  * session will be resumed.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_SP_START_OFFSET: Optional (s32)
+ * This field will be used when device supports Flexible TWT.
+ * This field contains an offset value by which to shift the starting time
+ * of the next service period. The value of offset can be negative or positive.
+ * If provided, this attribute will override
+ * QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME. The units are in microseconds.
+ *
  */
 enum qca_wlan_vendor_attr_twt_nudge {
 	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_INVALID = 0,
@@ -9559,6 +9779,7 @@ enum qca_wlan_vendor_attr_twt_nudge {
 	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE = 3,
 	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR = 4,
 	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF = 5,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_SP_START_OFFSET = 6,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST,
@@ -11200,6 +11421,18 @@ enum qca_vendor_wlan_sta_guard_interval {
  * This represents the average congestion duration of uplink frames in MAC
  * queue in unit of ms. This can be queried either in connected state or
  * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PER_MCS_TX_PACKETS: Array of u32 nested
+ * values, used in AP mode. This represents the MPDU packet count per MCS
+ * rate value of TX packets. Every index of this nested attribute corresponds
+ * to MCS index, e.g., Index 0 represents MCS0 TX rate. This can be
+ * queried in connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PER_MCS_RX_PACKETS: Array of u32 nested
+ * values, used in AP mode. This represents the MPDU packet count per MCS
+ * rate value of RX packets. Every index of this nested attribute corresponds
+ * to MCS index, e.g., Index 0 represents MCS0 RX rate. This can be
+ * queried in connected state.
  */
 enum qca_wlan_vendor_attr_get_sta_info {
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -11253,6 +11486,8 @@ enum qca_wlan_vendor_attr_get_sta_info {
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48,
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49,
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY = 50,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PER_MCS_TX_PACKETS = 51,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PER_MCS_RX_PACKETS = 52,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
@@ -13175,6 +13410,10 @@ enum qca_wlan_vendor_attr_coap_offload {
  * QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_TCLAS10_NEXT_HEADER attribute with the
  * filter mask specified by the
  * QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_TCLAS10_FILTER_MASK attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_SERVICE_CLASS_ID: Optional u16
+ * attribute.
+ * Represents the service class id of the configured SCS rule.
  */
 enum qca_wlan_vendor_attr_scs_rule_config {
 	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_INVALID = 0,
@@ -13196,6 +13435,7 @@ enum qca_wlan_vendor_attr_scs_rule_config {
 	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_TCLAS10_NEXT_HEADER = 16,
 	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_TCLAS10_FILTER_MASK = 17,
 	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_TCLAS10_FILTER_VALUE = 18,
+	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_SERVICE_CLASS_ID = 19,
 
 	/* Keep last */
 	QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_AFTER_LAST,
@@ -13294,4 +13534,748 @@ enum qca_wlan_vendor_attr_sar_capability {
 	QCA_WLAN_VENDOR_ATTR_SAR_CAPABILITY_AFTER_LAST - 1,
 };
 
+/**
+ * enum qca_wlan_vendor_attr_sr_stats - Attributes for Spatial Reuse statistics.
+ * These statistics are sent from the driver in a response when userspace
+ * queries to get the statistics using the operation
+ * %QCA_WLAN_SR_OPERATION_GET_STATS. These statistics are reset
+ * by the driver when the SR feature is enabled, when the driver receives
+ * %QCA_WLAN_SR_OPERATION_CLEAR_STATS operation, or when disconnected.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_OPPORTUNITIES_COUNT: u32 attribute.
+ * Mandatory only when non-SRG is supported by the AP and optional otherwise.
+ * This represents the number of non-SRG TX opportunities.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_PPDU_TRIED_COUNT: u32 attribute.
+ * Mandatory only when non-SRG is supported by the AP and optional otherwise.
+ * This represents the number of non-SRG PPDUs tried to transmit.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_PPDU_SUCCESS_COUNT: u32 attribute.
+ * Mandatory only when non-SRG is supported by the AP and optional otherwise.
+ * This represents the number of non-SRG PPDUs successfully transmitted.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_OPPORTUNITIES_COUNT: u32 attribute.
+ * Mandatory only when SRG is supported by the AP and optional otherwise.
+ * This represents the number of SRG TX opportunities.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_PPDU_TRIED_COUNT: u32 attribute.
+ * Mandatory only when SRG is supported by the AP and optional otherwise.
+ * This represents the number of SRG PPDUs tried to transmit.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_PPDU_SUCCESS_COUNT: u32 attribute.
+ * Mandatory only when SRG is supported by the AP and optional otherwise.
+ * This represents the number of SRG PPDUs successfully transmitted.
+ */
+enum qca_wlan_vendor_attr_sr_stats {
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_OPPORTUNITIES_COUNT = 1,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_PPDU_TRIED_COUNT = 2,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_NON_SRG_TX_PPDU_SUCCESS_COUNT = 3,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_OPPORTUNITIES_COUNT = 4,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_PPDU_TRIED_COUNT = 5,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_SRG_TX_PPDU_SUCCESS_COUNT = 6,
+
+	/* Keep last */
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_MAX =
+	QCA_WLAN_VENDOR_ATTR_SR_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_sr_reason_code - Defines the different reason codes used in
+ * Spatial Reuse feature.
+ *
+ * @QCA_WLAN_SR_REASON_CODE_ROAMING: The SR feature is disabled/enabled due to
+ * roaming to an AP that doesn't support/supports SR feature, respectively.
+ *
+ * @QCA_WLAN_SR_REASON_CODE_CONCURRENCY: The SR feature is disabled/enabled due
+ * to change in concurrent interfaces that are supported by the driver.
+ */
+enum qca_wlan_sr_reason_code {
+	QCA_WLAN_SR_REASON_CODE_ROAMING = 0,
+	QCA_WLAN_SR_REASON_CODE_CONCURRENCY = 1,
+};
+
+/**
+ * enum qca_wlan_sr_operation - Defines the different types of SR operations.
+ * The values are used inside attribute %QCA_WLAN_VENDOR_ATTR_SR_OPERATION.
+ *
+ * @QCA_WLAN_SR_OPERATION_SR_ENABLE: Userspace sends this operation to the
+ * driver to enable the Spatial Reuse feature. Attributes
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_PD_THRESHOLD and
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_PD_THRESHOLD are used with this
+ * operation.
+ *
+ * @QCA_WLAN_SR_OPERATION_SR_DISABLE: Userspace sends this operation to the
+ * driver to disable the Spatial Reuse feature.
+ *
+ * @QCA_WLAN_SR_OPERATION_SR_SUSPEND: The driver uses this operation in an
+ * asynchronous event sent to userspace when the SR feature is disabled.
+ * The disable reason is encoded in QCA_WLAN_VENDOR_ATTR_SR_PARAMS_REASON_CODE
+ * and sent along with the asynchronous event.
+ *
+ * @QCA_WLAN_SR_OPERATION_SR_RESUME: The driver uses this operation in an
+ * asynchronous event when the SR feature is enabled again after the SR feature
+ * was suspended by the driver earlier. The enable reason is
+ * encoded in QCA_WLAN_VENDOR_ATTR_SR_PARAMS_REASON_CODE. Attributes used are
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_PD_THRESHOLD and
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_PD_THRESHOLD.
+ *
+ * @QCA_WLAN_SR_OPERATION_PSR_AND_NON_SRG_OBSS_PD_PROHIBIT: This operation is
+ * used to prohibit PSR-based spatial reuse and non-SRG OBSS PD-based spatial
+ * reuse transmissions. Userspace sends this operation to the driver.
+ * The driver/firmware upon receiving this operation shall prohibit PSR-based
+ * spatial reuse and non-SRG OBSS PD-based spatial reuse transmissions.
+ *
+ * @QCA_WLAN_SR_OPERATION_PSR_AND_NON_SRG_OBSS_PD_ALLOW: This operation is
+ * used to allow PSR-based spatial reuse and non-SRG OBSS PD-based spatial
+ * reuse transmissions. Userspace sends this operation to the driver.
+ * The driver/firmware upon receiving this operation shall allow PSR-based
+ * spatial reuse and non-SRG OBSS PD-based spatial reuse transmissions.
+ *
+ * @QCA_WLAN_SR_OPERATION_GET_STATS: Userspace sends this operation to the
+ * driver to get the SR statistics and the driver sends a synchronous response
+ * with the attributes defined in enum qca_wlan_vendor_attr_sr_stats using the
+ * nested attribute %QCA_WLAN_VENDOR_ATTR_SR_STATS.
+ *
+ * @QCA_WLAN_SR_OPERATION_CLEAR_STATS: Userspace sends this operation to the
+ * driver to clear the SR statistics and upon receiving this operation
+ * the driver/firmware shall clear the SR statistics.
+ *
+ * @QCA_WLAN_SR_OPERATION_GET_PARAMS: Userspace sends this operation to the
+ * driver to get the SR parameters and the driver sends the synchronous response
+ * with the following required attributes:
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MIN_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MAX_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_MAX_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_HESIGA_VAL15_ENABLE,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_DISALLOW.
+ *
+ * @QCA_WLAN_SR_OPERATION_UPDATE_PARAMS: The driver uses this operation in an
+ * asynchronous event to userspace to update any changes in SR parameters.
+ * The following attributes are used with this operation:
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MIN_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MAX_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_MAX_OFFSET,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_HESIGA_VAL15_ENABLE,
+ * %QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_DISALLOW.
+ */
+enum qca_wlan_sr_operation {
+	QCA_WLAN_SR_OPERATION_SR_ENABLE = 0,
+	QCA_WLAN_SR_OPERATION_SR_DISABLE = 1,
+	QCA_WLAN_SR_OPERATION_SR_SUSPEND = 2,
+	QCA_WLAN_SR_OPERATION_SR_RESUME = 3,
+	QCA_WLAN_SR_OPERATION_PSR_AND_NON_SRG_OBSS_PD_PROHIBIT = 4,
+	QCA_WLAN_SR_OPERATION_PSR_AND_NON_SRG_OBSS_PD_ALLOW = 5,
+	QCA_WLAN_SR_OPERATION_GET_STATS = 6,
+	QCA_WLAN_SR_OPERATION_CLEAR_STATS = 7,
+	QCA_WLAN_SR_OPERATION_GET_PARAMS = 8,
+	QCA_WLAN_SR_OPERATION_UPDATE_PARAMS = 9,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sr_params - Defines attributes for SR configuration
+ * parameters used by attribute %QCA_WLAN_VENDOR_ATTR_SR_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_HESIGA_VAL15_ENABLE: Flag attribute.
+ * This attribute is optionally set in response to
+ * %QCA_WLAN_SR_OPERATION_GET_PARAMS and in request when operation is set to
+ * %QCA_WLAN_SR_OPERATION_PSR_AND_NON_SRG_OBSS_PD_PROHIBIT. Refer IEEE Std
+ * 802.11ax-2021 Figure 9-788r-SR Control field format to understand more
+ * about HESIGA_Spatial_reuse_value15_allowed.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_DISALLOW: Flag attribute.
+ * This attribute is used in response to %QCA_WLAN_SR_OPERATION_GET_PARAMS
+ * operation. This indicates whether non-SRG OBSS PD SR transmissions are
+ * allowed or not at non-AP STAs that are associated with the AP. If present
+ * non-SRG OBSS PD SR transmissions are not allowed else are allowed.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MIN_OFFSET: Optional u8
+ * attribute. This attribute is used in response to
+ * %QCA_WLAN_SR_OPERATION_GET_PARAMS operation. This indicates the SRG OBSS PD
+ * Min Offset field which contains an unsigned integer that is added to -82 dBm
+ * to generate the value of the SRG OBSS PD Min parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MAX_OFFSET: Optional u8
+ * attribute. This attribute is used in response to
+ * %QCA_WLAN_SR_OPERATION_GET_PARAMS operation. This indicates the SRG OBSS PD
+ * Max Offset field which contains an unsigned integer that is added to -82 dBm
+ * to generate the value of the SRG OBSS PD Max parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_MAX_OFFSET: Optional u8
+ * attribute. This attribute is used in response to
+ * %QCA_WLAN_SR_OPERATION_GET_PARAMS operation. This indicates the Non-SRG OBSS
+ * PD Max Offset field which contains an unsigned integer that is added to -82
+ * dBm to generate the value of the Non-SRG OBSS PD Max parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_PD_THRESHOLD: s32 attribute (in dBm).
+ * Userspace optionally sends this attribute with
+ * %QCA_WLAN_SR_OPERATION_SR_ENABLE operation to the driver to specify the
+ * preferred SRG PD threshold. The driver shall send this attribute to
+ * userspace in SR resume event to indicate the PD threshold being used for SR.
+ * When there is change in SRG PD threshold (for example, due to roaming, etc.)
+ * the driver shall indicate the userspace the newly configured SRG PD threshold
+ * using an asynchronous event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_PD_THRESHOLD: s32 attribute (in dBm).
+ * Userspace optionally sends this attribute with
+ * %QCA_WLAN_SR_OPERATION_SR_ENABLE operation to the driver to specify the
+ * preferred non-SRG PD threshold. The driver shall send this attribute to
+ * userspace in SR resume event to indicate the PD threshold being used for SR.
+ * When there is change in non-SRG PD threshold (for example, due to roaming,
+ * etc.) the driver shall indicate the userspace the newly configured non-SRG PD
+ * threshold using an asynchronous event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS_REASON_CODE: u32 attribute. The possible
+ * values are defined in enum qca_wlan_sr_reason_code. This
+ * attribute is used with %QCA_WLAN_SR_OPERATION_SR_RESUME and
+ * %QCA_WLAN_SR_OPERATION_SR_SUSPEND operations.
+ */
+enum qca_wlan_vendor_attr_sr_params {
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_HESIGA_VAL15_ENABLE = 1,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_DISALLOW = 2,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MIN_OFFSET = 3,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_OBSS_PD_MAX_OFFSET = 4,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_OBSS_PD_MAX_OFFSET = 5,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_SRG_PD_THRESHOLD = 6,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_NON_SRG_PD_THRESHOLD = 7,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_REASON_CODE = 8,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_MAX =
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sr - Defines the attributes used by the vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_SR.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_OPERATION: Mandatory u8 attribute for all requests
+ * from userspace to the driver. Possible values are defined in enum
+ * qca_wlan_sr_operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_PARAMS: Nested attribute, contains the SR
+ * configuration parameters. The possible attributes inside this attribute are
+ * defined in enum qca_wlan_vendor_attr_sr_params.
+ * This attribute is used when QCA_WLAN_VENDOR_ATTR_SR_OPERATION is set to
+ * %QCA_WLAN_SR_OPERATION_SR_ENABLE in requests from userspace to the driver and
+ * also in response from the driver to userspace when the response is sent for
+ * %QCA_WLAN_SR_OPERATION_GET_PARAMS.
+ * The driver uses this attribute in asynchronous events in which the operation
+ * is set to %QCA_WLAN_SR_OPERATION_SR_RESUME,
+ * %QCA_WLAN_SR_OPERATION_SR_SUSPEND or %QCA_WLAN_SR_OPERATION_UPDATE_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SR_STATS: Nested attribute, contains the SR
+ * statistics. These attributes used inside this are defined in enum
+ * qca_wlan_vendor_attr_sr_stats.
+ * This attribute is used in response from the driver to a command in which
+ * %QCA_WLAN_VENDOR_ATTR_SR_OPERATION is set to
+ * %QCA_WLAN_SR_OPERATION_GET_STATS.
+ */
+enum qca_wlan_vendor_attr_sr {
+	QCA_WLAN_VENDOR_ATTR_SR_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_SR_OPERATION = 1,
+	QCA_WLAN_VENDOR_ATTR_SR_PARAMS = 2,
+	QCA_WLAN_VENDOR_ATTR_SR_STATS = 3,
+
+	/* Keep last */
+	QCA_WLAN_VENDOR_ATTR_SR_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_SR_MAX =
+	QCA_WLAN_VENDOR_ATTR_SR_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event - Defines the attributes
+ * used in the QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT subcommand.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_MACADDR: 6 byte MAC address
+ * used by the peer on the link that corresponds to the link used for sending
+ * the event notification.
+ * @QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_MLD_MAC_ADDR: 6 byte
+ * MLD MAC address of the peer.
+ * @QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_PRIM_IFINDEX: u32 attribute,
+ * used to pass ifindex of the primary netdev.
+ */
+enum qca_wlan_vendor_attr_mlo_peer_prim_netdev_event {
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_MACADDR = 1,
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_MLD_MAC_ADDR = 2,
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_PRIM_IFINDEX = 3,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_MAX =
+	QCA_WLAN_VENDOR_ATTR_MLO_PEER_PRIM_NETDEV_EVENT_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_afc_freq_psd_info: This enum is used with
+ * nested attributes QCA_WLAN_VENDOR_ATTR_AFC_RESP_FREQ_PSD_INFO and
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_FREQ_RANGE_LIST to update the frequency range
+ * and PSD information.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_START: Required and type is
+ * u32. This attribute is used to indicate the start of the queried frequency
+ * range in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_END: Required and type is u32.
+ * This attribute is used to indicate the end of the queried frequency range
+ * in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_PSD: Required and type is u32.
+ * This attribute will contain the PSD information for a single range as
+ * specified by the QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_START and
+ * QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_END attributes.
+ *
+ * The PSD power info (dBm/MHz) from user space should be multiplied
+ * by a factor of 100 when sending to the driver to preserve granularity
+ * up to 2 decimal places.
+ * Example:
+ *     PSD power value: 10.21 dBm/MHz
+ *     Value to be updated in QCA_WLAN_VENDOR_ATTR_AFC_PSD_INFO: 1021.
+ *
+ * Note: QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_PSD attribute will be used only
+ * with nested attribute QCA_WLAN_VENDOR_ATTR_AFC_RESP_FREQ_PSD_INFO and with
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_FREQ_RANGE_LIST when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE.
+ *
+ * The following set of attributes will be used to exchange frequency and
+ * corresponding PSD information for AFC between the user space and the driver.
+ */
+enum qca_wlan_vendor_attr_afc_freq_psd_info {
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_START = 1,
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_RANGE_END = 2,
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_PSD = 3,
+
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_MAX =
+	QCA_WLAN_VENDOR_ATTR_AFC_FREQ_PSD_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_afc_chan_eirp_info: This enum is used with
+ * nested attribute QCA_WLAN_VENDOR_ATTR_AFC_CHAN_LIST_INFO to update the
+ * channel list and corresponding EIRP information.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM: Required and type is u8.
+ * This attribute is used to indicate queried channel from
+ * the operating class indicated in QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP: Optional and type is u32.
+ * This attribute is used to configure the EIRP power info corresponding
+ * to the channel number indicated in QCA_WLAN_VENDOR_ATTR_AFC_CHAN_NUM.
+ * The EIRP power info(dBm) from user space should be multiplied
+ * by a factor of 100 when sending to Driver to preserve granularity up to
+ * 2 decimal places.
+ * Example:
+ *     EIRP power value: 34.23 dBm
+ *     Value to be updated in QCA_WLAN_VENDOR_ATTR_AFC_EIRP_INFO: 3423.
+ *
+ * Note: QCA_WLAN_VENDOR_ATTR_AFC_EIRP_INFO attribute will only be used with
+ * nested attribute QCA_WLAN_VENDOR_ATTR_AFC_RESP_OPCLASS_CHAN_EIRP_INFO and
+ * with QCA_WLAN_VENDOR_ATTR_AFC_EVENT_OPCLASS_CHAN_LIST when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE:
+ *
+ * The following set of attributes will be used to exchange Channel and
+ * corresponding EIRP information for AFC between the user space and Driver.
+ */
+enum qca_wlan_vendor_attr_afc_chan_eirp_info {
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM = 1,
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP = 2,
+
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_MAX =
+	QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_afc_opclass_info: This enum is used with nested
+ * attributes QCA_WLAN_VENDOR_ATTR_AFC_RESP_OPCLASS_CHAN_EIRP_INFO and
+ * QCA_WLAN_VENDOR_ATTR_AFC_REQ_OPCLASS_CHAN_INFO to update the operating class,
+ * channel, and EIRP related information.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS: Required and type is u8.
+ * This attribute is used to indicate the operating class, as listed under
+ * IEEE Std 802.11-2020 Annex E Table E-4, for the queried channel list.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST: Array of nested attributes
+ * for updating the channel number and EIRP power information.
+ * It uses the attributes defined in
+ * enum qca_wlan_vendor_attr_afc_chan_eirp_info.
+ *
+ * Operating class information packing format for
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_OPCLASS_CHAN_INFO when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE_EXPIRY.
+ *
+ * m - Total number of operating classes.
+ * n, j - Number of queried channels for the corresponding operating class.
+ *
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS[0]
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST[0]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[0]
+ *      .....
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[n - 1]
+ *  ....
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS[m]
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST[m]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[0]
+ *      ....
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[j - 1]
+ *
+ * Operating class information packing format for
+ * QCA_WLAN_VENDOR_ATTR_AFC_RESP_OPCLASS_CHAN_EIRP_INFO and
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_OPCLASS_CHAN_INFO when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE.
+ *
+ * m - Total number of operating classes.
+ * n, j - Number of channels for the corresponding operating class.
+ *
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS[0]
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST[0]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[0]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP[0]
+ *      .....
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[n - 1]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP[n - 1]
+ *  ....
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS[m]
+ *  QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST[m]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[0]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP[0]
+ *      ....
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_CHAN_NUM[j - 1]
+ *      QCA_WLAN_VENDOR_ATTR_AFC_CHAN_EIRP_INFO_EIRP[j - 1]
+ *
+ * The following set of attributes will be used to exchange operating class
+ * information for AFC between the user space and the driver.
+ */
+enum qca_wlan_vendor_attr_afc_opclass_info {
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_OPCLASS = 1,
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_CHAN_LIST = 2,
+
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_MAX =
+	QCA_WLAN_VENDOR_ATTR_AFC_OPCLASS_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_afc_event_type: Defines values for AFC event type.
+ * Attribute used by QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE attribute.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY: AFC expiry event sent from the
+ * driver to userspace in order to query the new AFC power values.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE: Power update
+ * complete event will be sent from the driver to userspace to indicate
+ * processing of the AFC response.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVENT_TYPE_PAYLOAD_RESET: AFC payload reset event
+ * will be sent from the driver to userspace to indicate last received
+ * AFC response data has been cleared on the AP due to invalid data
+ * in the QCA_NL80211_VENDOR_SUBCMD_AFC_RESPONSE.
+ *
+ * The following enum defines the different event types that will be
+ * used by the driver to help trigger corresponding AFC functionality in user
+ * space.
+ */
+enum qca_wlan_vendor_afc_event_type {
+	QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY = 0,
+	QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE = 1,
+	QCA_WLAN_VENDOR_AFC_EVENT_TYPE_PAYLOAD_RESET = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_afc_ap_deployment_type: Defines values for AP
+ * deployment type.
+ * Attribute used by QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AP_DEPLOYMENT attribute.
+ *
+ * @QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_UNKNOWN: Unknown AP deployment.
+ *
+ * @QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_INDOOR: Indoor AP deployment.
+ *
+ * @QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_OUTDOOR: Outdoor AP deployment.
+ *
+ * The following enum defines different deployment modes that the AP might
+ * come up in. This information will be essential to retrieve deployment-type
+ * specific SP power values for AFC operation.
+ */
+enum qca_wlan_vendor_afc_ap_deployment_type {
+	QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_UNKNOWN = 0,
+	QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_INDOOR = 1,
+	QCA_WLAN_VENDOR_AFC_AP_DEPLOYMENT_TYPE_OUTDOOR = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_afc_evt_status_code: Defines values AP will use to
+ * indicate AFC response status.
+ * Enum used by QCA_WLAN_VENDOR_ATTR_AFC_EVENT_STATUS_CODE attribute.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_SUCCESS: Success
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_TIMEOUT: Indicates AFC indication
+ * command was not received within the expected time of the AFC expiry event
+ * being triggered.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_PARSING_ERROR: Indicates AFC data
+ * parsing error by the driver.
+ *
+ * @QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_LOCAL_ERROR: Indicates any other local
+ * error.
+ *
+ * The following enum defines the status codes that the driver will use to
+ * indicate whether the AFC data is valid or not.
+ */
+enum qca_wlan_vendor_afc_evt_status_code {
+	QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_SUCCESS = 0,
+	QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_TIMEOUT = 1,
+	QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_PARSING_ERROR = 2,
+	QCA_WLAN_VENDOR_AFC_EVT_STATUS_CODE_LOCAL_ERROR = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_afc_event: Defines attributes to be used with
+ * vendor event QCA_NL80211_VENDOR_SUBCMD_AFC_EVENT. These attributes will
+ * support sending only a single request to the user space at a time.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE: Required u8 attribute.
+ * Used with event to notify the type of AFC event received.
+ * Valid values are defined in enum qca_wlan_vendor_afc_event_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AP_DEPLOYMENT: u8 attribute. Required when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY,
+ * otherwise unused.
+ *
+ * This attribute is used to indicate the AP deployment type in the AFC request.
+ * Valid values are defined in enum qca_wlan_vendor_afc_ap_deployment_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_REQ_ID: Required u32 attribute.
+ * Unique request identifier generated by the AFC client for every
+ * AFC expiry event trigger. See also QCA_WLAN_VENDOR_ATTR_AFC_RESP_REQ_ID.
+ * The user space application is responsible for ensuring no duplicate values
+ * are in-flight with the server, e.g., by delaying a request, should the same
+ * value be received from different radios in parallel.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AFC_WFA_VERSION: u32 attribute. Optional.
+ * It is used when the QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY, otherwise unused.
+ *
+ * This attribute indicates the AFC spec version information. This will
+ * indicate the AFC version AFC client must use to query the AFC data.
+ * Bits 15:0  - Minor version
+ * Bits 31:16 - Major version
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_MIN_DES_POWER: u16 attribute. Required when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY,
+ * otherwise unused.
+ * This attribute indicates the minimum desired power (in dBm) for
+ * the queried spectrum.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_STATUS_CODE: u8 attribute. Required when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ *
+ * Valid values are defined in enum qca_wlan_vendor_afc_evt_status_code.
+ * This attribute is used to indicate if there were any errors parsing the
+ * AFC response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_SERVER_RESP_CODE: s32 attribute. Required
+ * when QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ *
+ * This attribute indicates the AFC response code. The AFC response codes are
+ * in the following categories:
+ * -1: General Failure.
+ * 0: Success.
+ * 100 - 199: General errors related to protocol.
+ * 300 - 399: Error events specific to message exchange
+ *            for the Available Spectrum Inquiry.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_EXP_DATE: u32 attribute. Required when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ *
+ * This attribute indicates the date until which the current response is
+ * valid for in UTC format.
+ * Date format: bits 7:0   - DD (Day 1-31)
+ *              bits 15:8  - MM (Month 1-12)
+ *              bits 31:16 - YYYY (Year)
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_EXP_TIME: u32 attribute. Required when
+ * QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ *
+ * This attribute indicates the time until which the current response is
+ * valid for in UTC format.
+ * Time format: bits 7:0   - SS (Seconds 0-59)
+ *              bits 15:8  - MM (Minutes 0-59)
+ *              bits 23:16 - HH (Hours 0-23)
+ *              bits 31:24 - Reserved
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_FREQ_RANGE_LIST: Array of nested attributes
+ * for updating the list of frequency ranges to be queried.
+ * Required when QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY or
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ * It uses the attributes defined in
+ * enum qca_wlan_vendor_attr_afc_freq_psd_info.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_EVENT_OPCLASS_CHAN_LIST: Array of nested attributes
+ * for updating the list of operating classes and corresponding channels to be
+ * queried.
+ * Required when QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE is
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_EXPIRY or
+ * QCA_WLAN_VENDOR_AFC_EVENT_TYPE_POWER_UPDATE_COMPLETE, otherwise unused.
+ * It uses the attributes defined in enum qca_wlan_vendor_attr_afc_opclass_info.
+ */
+enum qca_wlan_vendor_attr_afc_event {
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_TYPE = 1,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AP_DEPLOYMENT = 2,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_REQ_ID = 3,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AFC_WFA_VERSION = 4,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_MIN_DES_POWER = 5,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_STATUS_CODE = 6,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_SERVER_RESP_CODE = 7,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_EXP_DATE = 8,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_EXP_TIME = 9,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_FREQ_RANGE_LIST = 10,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_OPCLASS_CHAN_LIST = 11,
+
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_MAX =
+	QCA_WLAN_VENDOR_ATTR_AFC_EVENT_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_afc_response: Defines attributes to be used
+ * with vendor command QCA_NL80211_VENDOR_SUBCMD_AFC_RESPONSE. These attributes
+ * will support sending only a single AFC response to the driver at a time.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_DATA: Type is NLA_STRING. Required attribute.
+ * This attribute will be used to send a single Spectrum Inquiry response object
+ * from the 'availableSpectrumInquiryResponses' array object from the response
+ * JSON.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_TIME_TO_LIVE: Required u32 attribute.
+ *
+ * This attribute indicates the period (in seconds) for which the response
+ * data received is valid for.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_REQ_ID: Required u32 attribute.
+ *
+ * This attribute indicates the request ID for which the corresponding
+ * response is being sent for. See also QCA_WLAN_VENDOR_ATTR_AFC_EVENT_REQ_ID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_EXP_DATE: Required u32 attribute.
+ *
+ * This attribute indicates the date until which the current response is
+ * valid for in UTC format.
+ * Date format: bits 7:0   - DD (Day 1-31)
+ *              bits 15:8  - MM (Month 1-12)
+ *              bits 31:16 - YYYY (Year)
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_EXP_TIME: Required u32 attribute.
+ *
+ * This attribute indicates the time until which the current response is
+ * valid for in UTC format.
+ * Time format: bits 7:0   - SS (Seconds 0-59)
+ *              bits 15:8  - MM (Minutes 0-59)
+ *              bits 23:16 - HH (Hours 0-23)
+ *              bits 31:24 - Reserved
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_AFC_SERVER_RESP_CODE: Required s32 attribute.
+ *
+ * This attribute indicates the AFC response code. The AFC response codes are
+ * in the following categories:
+ * -1: General Failure.
+ * 0: Success.
+ * 100 - 199: General errors related to protocol.
+ * 300 - 399: Error events specific to message exchange
+ *            for the Available Spectrum Inquiry.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_FREQ_PSD_INFO: Array of nested attributes
+ * for PSD info of all the queried frequency ranges. It uses the attributes
+ * defined in enum qca_wlan_vendor_attr_afc_freq_psd_info. Required attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AFC_RESP_OPCLASS_CHAN_EIRP_INFO: Array of nested
+ * attributes for EIRP info of all queried operating class/channels. It uses
+ * the attributes defined in enum qca_wlan_vendor_attr_afc_opclass_info and
+ * enum qca_wlan_vendor_attr_afc_chan_eirp_info. Required attribute.
+ *
+ */
+enum qca_wlan_vendor_attr_afc_response {
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_DATA = 1,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_TIME_TO_LIVE = 2,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_REQ_ID = 3,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_EXP_DATE = 4,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_EXP_TIME = 5,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_AFC_SERVER_RESP_CODE = 6,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_FREQ_PSD_INFO = 7,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_OPCLASS_CHAN_EIRP_INFO = 8,
+
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_MAX =
+	QCA_WLAN_VENDOR_ATTR_AFC_RESP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_dozed_ap_state - Doze states for AP interface
+ *
+ * @QCA_WLAN_DOZED_AP_DISABLE: Disable doze state on the AP interface.
+ *
+ * @QCA_WLAN_DOZED_AP_ENABLE: Enable doze state on the AP interface. AP starts
+ * beaconing at higher beacon interval with Rx disabled.
+ */
+enum qca_wlan_dozed_ap_state {
+	QCA_WLAN_DOZED_AP_DISABLE = 0,
+	QCA_WLAN_DOZED_AP_ENABLE = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_dozed_ap - Used by the vendor command
+ * @QCA_NL80211_VENDOR_SUBCMD_DOZED_AP to configure or receive dozed AP mode
+ * configuration.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DOZED_AP_STATE: u8 attribute.
+ * Configures the doze state for an AP interface. Possible values are defined
+ * in enum qca_wlan_dozed_ap_state. @QCA_NL80211_VENDOR_SUBCMD_DOZED_AP event
+ * gets triggered asynchronously to provide updated AP interface configuration.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DOZED_AP_COOKIE: Unsigned 64-bit cookie provided by
+ * the driver in the response to specific @QCA_NL80211_VENDOR_SUBCMD_DOZED_AP
+ * command, which is used later to maintain synchronization between commands
+ * and asynchronous events.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DOZED_AP_NEXT_TSF: u64 attribute.
+ * Used in event to indicate the next TBTT TSF timer value after applying the
+ * doze mode configuration. Next TBTT TSF is the time at which the AP sends
+ * the first beacon after entering or exiting dozed mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DOZED_AP_BI_MULTIPLIER: u16 attribute.
+ * Used with event to inform the periodicity of beacon transmission that would
+ * be skipped at all TBTTs in between.
+ */
+enum qca_wlan_vendor_attr_dozed_ap {
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_STATE = 1,
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_COOKIE = 2,
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_NEXT_TSF = 3,
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_BI_MULTIPLIER = 4,
+
+	/* Keep last */
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_MAX =
+	QCA_WLAN_VENDOR_ATTR_DOZED_AP_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */
diff --git a/wcn6740/qcwcn/wifi_hal/wifi_hal.cpp b/wcn6740/qcwcn/wifi_hal/wifi_hal.cpp
index 4e0d0da..ae4c91c 100644
--- a/wcn6740/qcwcn/wifi_hal/wifi_hal.cpp
+++ b/wcn6740/qcwcn/wifi_hal/wifi_hal.cpp
@@ -146,6 +146,8 @@ static int wifi_is_nan_ext_cmd_supported(wifi_interface_handle handle);
 wifi_error
     wifi_init_tcp_param_change_event_handler(wifi_interface_handle iface);
 
+wifi_error wifi_set_voip_mode(wifi_interface_handle iface, wifi_voip_mode mode);
+
 /* Initialize/Cleanup */
 
 wifi_interface_handle wifi_get_iface_handle(wifi_handle handle, char *name)
@@ -1086,6 +1088,7 @@ wifi_error init_wifi_vendor_hal_func_table(wifi_hal_fn *fn) {
     fn->wifi_multi_sta_set_use_case = wifi_multi_sta_set_use_case;
     fn->wifi_set_coex_unsafe_channels = wifi_set_coex_unsafe_channels;
     fn->wifi_set_dtim_config = wifi_set_dtim_config;
+    fn->wifi_set_voip_mode = wifi_set_voip_mode;
     fn->wifi_get_usable_channels = wifi_get_usable_channels;
 
     return WIFI_SUCCESS;
diff --git a/wcn6740/qcwcn/wifi_hal/wificonfig.cpp b/wcn6740/qcwcn/wifi_hal/wificonfig.cpp
index 989399f..5aec138 100644
--- a/wcn6740/qcwcn/wifi_hal/wificonfig.cpp
+++ b/wcn6740/qcwcn/wifi_hal/wificonfig.cpp
@@ -1453,3 +1453,78 @@ cleanup:
     delete wifiConfigCommand;
     return (wifi_error)ret;
 }
+
+/**
+ * Invoked to set voip optimization mode for the provided STA iface
+ */
+ wifi_error wifi_set_voip_mode(wifi_interface_handle iface, wifi_voip_mode mode)
+{
+    int requestId, ret = 0;
+    WiFiConfigCommand *wifiConfigCommand;
+
+    struct nlattr *nlData;
+    interface_info *ifaceInfo = getIfaceInfo(iface);
+
+    wifi_handle wifiHandle = getWifiHandle(iface);
+    if (!wifiHandle) {
+        ALOGE("%s: Error wifi_handle NULL", __FUNCTION__);
+        return WIFI_ERROR_UNKNOWN;
+    }
+
+    requestId = get_requestid();
+    ALOGV("%s: voip mode=%d", __FUNCTION__, mode);
+    wifiConfigCommand = new WiFiConfigCommand(
+                            wifiHandle,
+                            requestId,
+                            OUI_QCA,
+                            QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION);
+
+    if (wifiConfigCommand == NULL) {
+        ALOGE("%s: Error wifiConfigCommand NULL", __FUNCTION__);
+        return WIFI_ERROR_UNKNOWN;
+    }
+
+    /* Create the NL message. */
+    ret = wifiConfigCommand->create();
+    if (ret < 0) {
+        ALOGE("%s: failed to create NL msg. Error:%d",
+            __FUNCTION__, ret);
+        goto cleanup;
+    }
+
+    /* Set the interface Id of the message. */
+    ret = wifiConfigCommand->set_iface_id(ifaceInfo->name);
+    if (ret < 0) {
+        ALOGE("%s: failed to set iface id. Error:%d",
+            __FUNCTION__, ret);
+        goto cleanup;
+    }
+
+    /* Add the vendor specific attributes for the NL command. */
+    nlData = wifiConfigCommand->attr_start(NL80211_ATTR_VENDOR_DATA);
+    if (!nlData) {
+        ALOGE("%s: failed attr_start for VENDOR_DATA. Error:%d",
+            __FUNCTION__, ret);
+        goto cleanup;
+    }
+
+    if (wifiConfigCommand->put_u8(
+        QCA_WLAN_VENDOR_ATTR_CONFIG_WFC_STATE, (u8)mode)) {
+        ALOGE("%s: failed to put vendor data. Error:%d",
+            __FUNCTION__, ret);
+        goto cleanup;
+    }
+    wifiConfigCommand->attr_end(nlData);
+
+    /* Send the NL msg. */
+    wifiConfigCommand->waitForRsp(false);
+    ret = wifiConfigCommand->requestEvent();
+    if (ret != 0) {
+        ALOGE("%s: requestEvent Error:%d", __FUNCTION__, ret);
+        goto cleanup;
+    }
+
+cleanup:
+    delete wifiConfigCommand;
+    return (wifi_error)ret;
+}