diff options
Diffstat (limited to 'wl1271/config/tiwlan.ini')
| -rw-r--r-- | wl1271/config/tiwlan.ini | 281 |
1 files changed, 0 insertions, 281 deletions
diff --git a/wl1271/config/tiwlan.ini b/wl1271/config/tiwlan.ini deleted file mode 100644 index f959d86..0000000 --- a/wl1271/config/tiwlan.ini +++ /dev/null @@ -1,281 +0,0 @@ -# The letters in this file are case sensitive, use lower case only !!! - -SmeConnectMode = 1 #0 - auto, 1 - manual -ScanResultAging = 0 # in Second - range 0..1000 -WME_Enable = 1 #0=diable WME support / 1=Enable -dot11NetworkType = 3 #2 - A only mode, 3 - B/G mode, 4 - A/G Dual mode -SmeScanGChannelList = 1,2,3,4,5,6,7,8,9,10,11,12,13,14 -SmeScanAChannelList = 36,40,44,48,52,56,60,64 -RecoveryEnable = 1 #0 -Disabled 1- Enabled -BThWlanCoexistEnable = 1 #0 - SG disable, 1 - SG protective -TxAggregationPktsLimit = 0 # Disable Tx packets aggregation for Linux (degrades TP) - -# -# Power Manager -# -BeaconListenInterval = 1 # the number of N-Beacon or N-DTim -DtimListenInterval = 1 # - -ReAuthActivePriority = 0 - -dot11PowerMode = 0 #0 - Auto - #1 - Active - #2 - Short Doze - #3 - Long Doze - -PowerMgmtHangOverPeriod = 10 #in mSec units - -AutoPowerModeDozeMode = 3 #2 - Short Doze - #3 - Long Doze - -AutoPowerModeActiveTh = 2 #packets per second (default 15) - -AutoPowerModeDozeTh = 4 #packets per seconds - threshold for entering ELP in Auto mode (default 8) - -defaultPowerLevel = 0 #0 - ELP - #1 - PD - #2 - AWAKE - -PowerSavePowerLevel = 0 #0 - ELP - #1 - PD - #2 - AWAKE - -DcoItrimEnabled = 0 # 0 - Disabled 1 - Enabled -DcoItrimModerationTimeout = 50000 - -TxPower = 205 #set Default Tx Power Level in DBM * 10 -dot11FragmentationThreshold = 4096 -dot11RTSThreshold = 4096 -WPAMixedMode= 1 -RSNPreAuthentication = 1 - -CalibrationChannel24 = 7 -CalibrationChannel5 = 36 - -# Regulatury Domain tables. -# Each byte correlates to one channel in sequential order. Table 2.4 starts from channel 1, Table 5.0 starts from channel 36. -# Bits 0..4 - Max power allowed in Dbm. -# Bit 6 - Channel is allowed for Active scan -# BIt 7 - Channel is allowed -AllowedChannelsTable24 = FFFFFFFFFFFFFFFFFFFFFFFFFFFF -AllowedChannelsTable5 = FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000000000000000000000000000000000000000000000000000000000000000000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000000000000000FF000000FF000000FF000000FF000000FF000000000000000000000000000000 - -SpectrumManagement = 0 # 0 - Disable 802.11h, 1 - Enable - -RxBroadcastInPs = 1 - -#arp ip filter - must be written 8 characters for example 10.2.43.3 -> 0a 02 2b 21 and not a 2 2b 21 -ArpIp_Addr = 0a 02 0a b7 -ArpIp_Filter_ena = 0 - - -#mac filter -Mac_Filter_Enabled = 0 -numGroupAddrs = 4 -Group_addr0 = 10 01 02 03 04 05 -Group_addr1 = 11 11 12 13 14 15 -Group_addr2 = 12 21 22 23 24 25 -Group_addr3 = 13 31 32 33 34 35 -Group_addr4 = 14 41 42 43 44 45 -Group_addr5 = 15 51 52 53 54 55 -Group_addr6 = 16 61 62 63 64 65 -Group_addr7 = 17 71 72 73 74 75 - -#beacon filter -Beacon_Filter_Desired_State = 1 -Beacon_Filter_Stored = 1 - -#beacon IE table -#the size is the len of the string - spaces = number of bytes -Beacon_IE_Num_Of_Elem = 16 -Beacon_IE_Table_Size = 37 -Beacon_IE_Table = 00 01 01 01 32 01 2a 01 03 01 06 01 07 01 20 01 25 01 23 01 30 01 28 01 2e 01 3d 01 85 01 dd 01 00 52 f2 02 00 01 - -#Rate adaptation -RateContThreshold = 10 -RateStepUpThreshold = 2 -FBShortInterval = 40 -FBLongInterval = 200 -RateAdaptationTimeout = 300 - -# rate policy - short / long retries -RatePolicyUserShortRetryLimit = 10 -RatePolicyUserLongRetryLimit = 10 - -#rate policies -#rates guide: -->>mcs7,msc6,mcs5,mcs4,mcs3,mcs2,mcs1,mcs0,54,58,36,24,22,18,12,11,9,6,5.5,2,1 - - -OsDbgState = 0x01e9003c # -1 or 0xffffffff -all (opens debug messages in o.s. only - sevirity+modules) - -############################################################# -# Configure the severity table (0 = Disable/ 1 = Enable) -# -# Byte #0: Init -# Byte #1: Information -# Byte #2: Warning -# Byte #3: Error -# Byte #4: Fatal Error -# Byte #5: SM -# Byte #6: Console -############################################################# - -# LAUNCH Logging Mask -ReportSeverityTable = 0000000 -# Default Logging Mask -# ReportSeverityTable = 0001101 - -BeaconReceiveTime = 50 - -# -# Mem blocks -# -RxMemBlksNum = 50 -QOS_txBlksThresholdBE = 20 -QOS_txBlksThresholdVI = 20 -QOS_txBlksThresholdVO = 20 - -# -# QOS UPSD -# - -desiredPsMode = 1 # Global Power save delivery protocol (1 - UPSD, 0 - Legacy) -QOS_wmePsModeBE = 1 # Power save delivery protocol for BE AC (1 - UPSD, 0 - Legacy) -QOS_wmePsModeBK = 1 # Power save delivery protocol for BK AC (1 - UPSD, 0 - Legacy) -QOS_wmePsModeVI = 1 # Power save delivery protocol for VI AC (1 - UPSD, 0 - Legacy) -QOS_wmePsModeVO = 1 # Power save delivery protocol for VO AC (1 - UPSD, 0 - Legacy) - -# -# QOS Classifier -# -Clsfr_Type = 1 # 1 - DSCP, 2 - Port, 3 - IP+port - - -NumOfCodePoints = 4 -DSCPClassifier00_CodePoint = 0 #Best Effort -DSCPClassifier00_DTag = 0 - -DSCPClassifier01_CodePoint = 8 #Background -DSCPClassifier01_DTag = 1 - -DSCPClassifier02_CodePoint = 40 #Video -DSCPClassifier02_DTag = 5 - -DSCPClassifier03_CodePoint = 56 #Voice -DSCPClassifier03_DTag = 6 - -dot11MaxReceiveLifetime=512000 -FracOfLifeTimeToDrop = 50 - -WiFiAdhoc = 0 -WiFiWmmPS = 0 # Use 1 on WiFi test in order to configure PS to work in WMM mode - -EarlyWakeUp = 1 # 0 - Disable , 1 - Enable - -TxEnergyDetection = 0 # Use 1 for enabling - -TriggeredScanTimeOut = 50000 # Maximum time in Us between 2 channels on triggered scan -# PsPoll delivery failure solution -PsPollDeliveryFailureRecoveryPeriod = 20 # Time in Ms to stay ACTIVE ('0' to disable feature) -ConsecutivePsPollDeliveryFailureThreshold = 4 # Number of failed PsPoll's to start ACTIVE time out - - -# Weights in percent for RSSI/SNR Average calculations -RssiBeaconAverageWeight = 20 -RssiPacketAverageWeight = 10 -SnrBeaconAverageWeight = 20 -SnrPacketAverageWeight = 10 - -HT_Enable=1 #0=diable 802.11n support / 1=Enable -IbssProtectionType = 1 # 0 = CTS protaction disable ; 1 = Standard CTS protaction -BurstModeEnable = 0 # 0 - Disabled 1 - Enabled -RoamScanEnable = 0 # 1- roaming and immidate scan enable by deafult 0- allowing roaming & scannig due to CLI confguration -RoamingOperationalMode = 1 # 0=Manual , 1=Auto -RSNExternalMode = 0 # 0=Internal , 1=External -SendTspecInReassPkt = 0 # 0=do not send, 1=send - - -FmCoexuSwallowPeriod = 5 -FmCoexuNDividerFrefSet2 = 12 -FmCoexuMDividerFrefSet2 = 148 - -BaPolicyTid_0 = 3 - - -############################################################################################################################## -################################################## Radio parameters data - Start ############################################# -############################################################################################################################## - -################################ General parameters ################################ -STRFRefClock = 9 # Unit: Options 5'bXX000 : Bit 0,1,2 - (0: 19.2MHz; 1: 26MHz; 2: 38.4MHz (Default); 3: 52MHz; 4: 38.4MHz XTAL) ; - # 5'bX0XXX : Bit 3 - CLK_REQ type; 0 = wired-OR (Default) , 1= push-pull - # 5'b0XXXX : Bit 4 - CLK_REQ polarity; 0 = Normal (Default) , 1=Inverted, Format: Unsigned, Source: Customer -STRFRefClockSettingTime = 5 -TXBiPFEMAutoDetect = 0 # Unit: Options (0: Manual Mode; 1: Automatic mode), Format: Unsigned, Source: Customer -TXBiPFEMManufacturer = 1 # Unit: Options (0: RFMD; 1: Triquint), Format: Unsigned, Source: Customer -ClockValidOnWakeup = 0 -DC2DCMode = 0 # Unit: Options (0: btSPI is not used; 1: mux DC2DC mode to BT_FUNC2), Format: Unsigned, Source: Customer -Single_Dual_Band_Solution = 0 # Unit: Options (0: Single band. 2.4GHz only; 1: Dual band = 2.4GHz and 5GHz solution), Format: Unsigned, Source: Customer -Settings = 65 # 0x41 Unit: Options (Bit0: NBI (0: Off; 1: On), Bit1: Telec channel 14 (0: Off; 1: On), Format: Unsigned, Source: Customer - # Bit2: FEM0-LB, Bit3: FEM0-HB, Bit4: FEM1-LB, Bit5: FEM1-HB - TX BiP load (0: Internal; 1: External), - # Bit6: LPD Low band, Bit7: LPD High band - -# Smart Reflex params -SRState = 0 # Unit: Options ( 1 - Enabled 0- Disabled) Format: Decimal, Source: TI -SRF1 = 07,03,18,10,05,fb,f0,e8, 0,0,0,0,0,0,0f,3f # Unit: SRF1 values, Format: Signed, Source: TI -SRF2 = 07,03,18,10,05,f6,f0,e8 # Unit: SRF2 values, Format: Signed, Source: TI -SRF3 = 07,03,18,10,05,fb,f0,e8 # Unit: SRF3 values, Format: Signed, Source: TI - -################################ FEM dependents parameters ####################################### -###################### FEM1 parameters ###################### - -# (for Single bend 2.4G parameters FEM1 (TQS 2.5) HDK20) - -RxTraceInsertionLoss_2_4G = 0 -TXTraceLoss_2_4G = 0 -RxRssiAndProcessCompensation_2_4G = ec,f6,00,0c,18,f8,fc,00,08,10,f0,f8,00,0a,14 -TXBiPReferencePDvoltage_2_4G = 375 # 0x177 -TxBiPReferencePower_2_4G = 128 # 0x80 -TxBiPOffsetdB_2_4G = 0 -TxPerRatePowerLimits_2_4G_Normal = 1d, 1f, 22, 26, 28, 29 -TxPerRatePowerLimits_2_4G_Degraded = 1a, 1f, 22, 24, 26, 28 -TxPerRatePowerLimits_2_4G_Extreme = 16, 1d, 1e, 20, 24, 25 # Unit: 1/2dB, Format: Signed, Source: Customer -DegradedLowToNormalThr_2_4G = 30 # 0x1e Unit: 1/10 volts, Format: Unsigned, Source: TI -NormalToDegradedHighThr_2_4G = 45 # 0x2d Unit: 1/10 volts, Format: Unsigned, Source: TI -TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 -TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 -TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00 -TxIbiasTable_2_4G = 11,11,15,11,15,0f -RxFemInsertionLoss_2_4G = 14 # 0x0e - - -###################### FEM0 parameters ######################### - -# (for Single bend 2.4G parameters FEM0 (RFMD 3.0) HDK20) - -#RxTraceInsertionLoss_2_4G = 0 -#TXTraceLoss_2_4G = 0 -#RxRssiAndProcessCompensation_2_4G = ec,f6,00,0c,18,f8,fc,00,08,10,f0,f8,00,0a,14 -#TXBiPReferencePDvoltage_2_4G = 356 # 0x0164 -#TxBiPReferencePower_2_4G = 128 # 0x80 -#TxBiPOffsetdB_2_4G = 0 -#TxPerRatePowerLimits_2_4G_Normal = 1c,1f,22,24,28,29 -#TxPerRatePowerLimits_2_4G_Degraded = 19,1f,22,23,27,28 -#TxPerRatePowerLimits_2_4G_Extreme = 50,50,50,50,50,50 # Unit: 1/2dB, Format: Signed, Source: Customer -#DegradedLowToNormalThr_2_4G = 30 # 1e Unit: 1/10 volts, Format: Unsigned, Source: TI -#NormalToDegradedHighThr_2_4G = 45 # 2d Unit: 1/10 volts, Format: Unsigned, Source: TI -#TxPerChannelPowerLimits_2_4G_11b = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 -#TxPerChannelPowerLimits_2_4G_OFDM = 50,50,50,50,50,50,50,50,50,50,50,50,50,50 -#TxPDVsRateOffsets_2_4G = 01,02,02,02,02,00 -#TxIbiasTable_2_4G = 1a,1a,1a,1a,1a,21 -#RxFemInsertionLoss_2_4G = 16 # 0x10 - -############################################################################################################################## -################################################## Radio parameters data - End ############################################### -############################################################################################################################## - - - - - - |