diff options
Diffstat (limited to 'wl1271/platforms/hw/linux/SdioAdapter.h')
-rw-r--r-- | wl1271/platforms/hw/linux/SdioAdapter.h | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/wl1271/platforms/hw/linux/SdioAdapter.h b/wl1271/platforms/hw/linux/SdioAdapter.h deleted file mode 100644 index dacdcd5..0000000 --- a/wl1271/platforms/hw/linux/SdioAdapter.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * SdioAdapter.h - * - * Copyright(c) 1998 - 2009 Texas Instruments. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Texas Instruments nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** \file SdioAdapter.h - * \brief SDIO adapter module API definition - * - * \see SdioAdapter.c - */ - -#ifndef __SDIO_ADAPT_API_H__ -#define __SDIO_ADAPT_API_H__ - - -#include "TxnDefs.h" - - -/************************************************************************ - * Defines - ************************************************************************/ - -/************************************************************************ - * Types - ************************************************************************/ - -/************************************************************************ - * Functions - ************************************************************************/ -/** \brief sdioAdapt_ConnectBus: Init SDIO driver and HW - * - * \param fCbFunc - The bus driver's callback upon async transaction completion - * \param hCbArg - The CB function handle - * \param uBlkSizeShift - In block-mode: BlkSize = (1 << uBlkSizeShift) - * \param uSdioThreadPriority - The SDIO interrupt handler thread priority - * \param pRxDmaBufAddr - Pointer for providing the Rx DMA buffer address to the upper layers to use it directly - * \param pRxDmaBufLen - The Rx DMA buffer length in bytes - * \param pTxDmaBufAddr - Pointer for providing the Tx DMA buffer address to the upper layers to use it directly - * \param pTxDmaBufLen - The Tx DMA buffer length in bytes - * \return 0 = OK, otherwise = error - * - * \par Description - * Called by BusDrv to initialize the SDIO driver and HW. - * - * \sa - */ -int sdioAdapt_ConnectBus (void * fCbFunc, - void * hCbArg, - unsigned int uBlkSizeShift, - unsigned int uSdioThreadPriority, - unsigned char **pRxDmaBufAddr, - unsigned int *pRxDmaBufLen, - unsigned char **pTxDmaBufAddr, - unsigned int *pTxDmaBufLen); - -/** \brief sdioAdapt_DisconnectBus: Disconnect SDIO driver - * - * \param void - * \return 0 = OK, otherwise = error - * - * \par Description - * Called by BusDrv. Disconnect the SDIO driver. - * - * \sa - */ -int sdioAdapt_DisconnectBus (void); -/** \brief sdioAdapt_Transact: Process transaction - * - * \param uFuncId - SDIO function ID (1- BT, 2 - WLAN) - * \param uHwAddr - HW address where to write the data - * \param pHostAddr - The data buffer to write from or read into - * \param uLength - The data length in bytes - * \param bDirection - TRUE = Read, FALSE = Write - * \param bBlkMode - If TRUE - use block mode - * \param bMore - If TRUE, more transactions are expected so don't turn off any HW - * \return COMPLETE if Txn completed in this context, PENDING if not, ERROR if failed - * - * \par Description - * Called by the BusDrv module to issue an SDIO transaction. - * Call write or read SDIO-driver function according to the direction. - * Use Sync or Async method according to the transaction length - * - * \note It's assumed that this function is called only when idle (i.e. previous Txn is done). - * - * \sa - */ -ETxnStatus sdioAdapt_Transact (unsigned int uFuncId, - unsigned int uHwAddr, - void * pHostAddr, - unsigned int uLength, - unsigned int bDirection, - unsigned int bBlkMode, - unsigned int bFixedAddr, - unsigned int bMore); -/** \brief sdioAdapt_TransactBytes: Process bytes transaction - * - * \param uFuncId - SDIO function ID (1- BT, 2 - WLAN) - * \param uHwAddr - HW address where to write the data - * \param pHostAddr - The data buffer to write from or read into - * \param uLength - The data length in bytes - * \param bDirection - TRUE = Read, FALSE = Write - * \param bMore - If TRUE, more transactions are expected so don't turn off any HW - * \return COMPLETE if Txn succeeded, ERROR if failed - * - * \par Description - * Called by the BusDrv module to issue a bytes stream SDIO transaction. - * Call write or read SDIO-driver Sync function according to the direction. - * - * \note It's assumed that this function is called only when idle (i.e. previous Txn is done). - * - * \sa - */ -ETxnStatus sdioAdapt_TransactBytes (unsigned int uFuncId, - unsigned int uHwAddr, - void * pHostAddr, - unsigned int uLength, - unsigned int bDirection, - unsigned int bMore); - - - -#endif /*__SDIO_ADAPT_API_H__*/ |