diff options
Diffstat (limited to 'wl1271/stad/src/Sta_Management/currBss.h')
| -rw-r--r-- | wl1271/stad/src/Sta_Management/currBss.h | 192 |
1 files changed, 0 insertions, 192 deletions
diff --git a/wl1271/stad/src/Sta_Management/currBss.h b/wl1271/stad/src/Sta_Management/currBss.h deleted file mode 100644 index 30829b7..0000000 --- a/wl1271/stad/src/Sta_Management/currBss.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * currBss.h - * - * Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Texas Instruments nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** \file currBss.h - * \brief Current BSS module API - * - * \see currBss.c - */ - -/**************************************************************************** - * * - * MODULE: Current BSS * - * PURPOSE: Current BSS Module API * - * * - ****************************************************************************/ - -#ifndef _CURR_BSS_H_ -#define _CURR_BSS_H_ - -#include "siteMgrApi.h" -#include "roamingMngrTypes.h" -#include "paramOut.h" - -/* Constants */ - -#define MAX_NUM_OF_RSSI_SNR_TRIGGERS 8 - -/* Enumerations */ - -/** -* Current BSS module configurable parameters type -*/ -typedef enum -{ - CURR_BSS_TYPE = 0, /**< BSS or IBSS */ - CURR_BSS_CONNECTED_STATE, /**< Connected or not connected, roaming enabled or not */ - CURR_BSS_LOW_RSSI_SCAN_COND,/**< Set by AP Connection when Roaming Manager configures low RSSI threshold for BG scan */ - CURR_BSS_HI_RSSI_SCAN_COND, /**< Set by AP Connection when Roaming Manager configures normal RSSI threshold for BG scan */ - CURR_BSS_QUALITY_THRESHOLD, /**< Set by AP Connection when Roaming Manager configures event of type 'Low RSSI' */ - CURR_BSS_NO_BSS_THRESHOLDS, /**< Set by AP Connection when Roaming Manager configures event of type 'BSS Loss' */ - CURR_BSS_NUM_OF_TEST_REPEAT,/**< Set by AP Connection when Roaming Manager configures event of type 'BSS Loss' */ - CURR_BSS_CONSEC_NACK, /**< Set by AP Connection when Roaming Manager configures event of type 'Consecutive nack' */ - CURR_BSS_INFO /**< Requested by AP Connection: includes quality and last beacon info */ -} currBSS_configParam_e; - - -/* Structures */ - -typedef struct triggerDataEx -{ - TI_UINT8 data; - TI_UINT16 clientID; -} triggerDataEx_t; - - -typedef struct triggerDesc -{ - TI_UINT16 clientID; - TI_HANDLE fCB; - TI_HANDLE hCB; - TI_BOOL WasRegisteredByApp; -} triggerDesc_t; - - -/** -* Current BSS control block -* Following structure defines parameters that can be configured externally, -* internal variables, and handlers of other modules used by Current BSS module -*/ - -typedef struct _currBSS_t -{ - /* Internal variables and configurable parameters */ - ScanBssType_e type; /**< Set by SME module; EBSS, IBSS or none */ - ERadioBand band; /**< Set by SME module */ - TI_UINT8 channel; /**< Set by AP Connection, SME and Switch Channel modules */ - TI_BOOL isConnected; /**< Default: not connected */ - bssEntry_t currAPInfo; /**< Set by SME upon request from AP Connection */ - - TI_INT8 lowRssiThreshold; /**< Last configured threshold for Low-RSSI */ - TI_INT8 lowSnrThreshold; /**< Last configured threshold Low-SNR */ - TI_INT8 lowQualityForBkgrdScan; /**< Indicator used to increase the background scan period when quality is low */ - TI_INT8 highQualityForBkgrdScan;/**< Indicator used to reduce the background scan period when quality is normal */ - TI_UINT8 numExpectedTbttForBSSLoss;/**< last configured value without Soft Gemini compensation */ - TI_UINT8 maxTxRetryThreshold; /**< last configured threshold for max Tx retry */ - - TI_BOOL bUseSGParams; /**< Whether to use the Soft Gemini compensation on the roaming triggers (currently: BSS Loss) */ - /**< This compensation is needed since BT Activity might over-run beacons */ - TI_UINT32 SGcompensationPercent; /**< the percentage of increasing the TbttForBSSLoss value when SG is enabled */ - TI_UINT8 uDefaultKeepAlivePeriod;/**< The default keep-alive period in seconds */ - TI_UINT8 keepAliveBuffer[ WLAN_WITH_SNAP_QOS_HEADER_MAX_SIZE ]; - /**< Buffer to store null-data keep-alive template */ - - triggerDesc_t aTriggersDesc[MAX_NUM_OF_RSSI_SNR_TRIGGERS]; /* static table to be used for trigger event registration*/ - TI_UINT8 RoamingOperationalMode; /* 0 - manual , 1 - Auto */ - - /* Handlers of other modules used by AP Connection */ - TI_HANDLE hOs; - TI_HANDLE hPowerMngr; - TI_HANDLE hAPConn; - TI_HANDLE hSme; - TI_HANDLE hTWD; - TI_HANDLE hMlme; - TI_HANDLE hReport; - TI_HANDLE hRegulatoryDomain; - TI_HANDLE hSiteMgr; - TI_HANDLE hConn; - TI_HANDLE hScanMngr; - TI_HANDLE hEvHandler; - TI_HANDLE hTxCtrl; -} currBSS_t; - - -/* Typedefs */ - -typedef void (*TCurrBssDataCb) (TI_HANDLE hCurrBSS, TI_UINT8 *data, TI_UINT8 dataLength); - -/* External data definitions */ - -/* External functions definitions */ - -/* Function prototypes */ - -TI_HANDLE currBSS_create(TI_HANDLE hOs); -void currBSS_init (TStadHandlesList *pStadHandles); -TI_STATUS currBSS_SetDefaults (TI_HANDLE hCurrBSS, TCurrBssInitParams *pInitParams); -TI_STATUS currBSS_unload(TI_HANDLE hCurrBSS); - -void currBSS_updateConnectedState(TI_HANDLE hCurrBSS, TI_BOOL isConnected, ScanBssType_e type); -TI_STATUS currBSS_updateRoamingTriggers(TI_HANDLE hCurrBSS, - roamingMngrThresholdsConfig_t *params); -void currBSS_SGconfigureBSSLoss(TI_HANDLE hCurrBSS, - TI_UINT32 SGcompensationPercent , TI_BOOL bUseSGParams); -bssEntry_t *currBSS_getBssInfo(TI_HANDLE hCurrBSS); - -TI_STATUS currBSS_getRoamingParams(TI_HANDLE hCurrBSS, - TI_UINT8 * aNumExpectedTbttForBSSLoss, - TI_INT8 * aLowQualityForBackgroungScanCondition, - TI_INT8 * aNormalQualityForBackgroungScanCondition); - -TI_STATUS currBSS_probRespReceivedCallb(TI_HANDLE hCurrBSS, - TRxAttr *pRxAttr, - TMacAddr *bssid, - mlmeFrameInfo_t *pFrameInfo, - TI_UINT8 *dataBuffer, - TI_UINT16 bufLength); - -TI_STATUS currBSS_beaconReceivedCallb(TI_HANDLE hCurrBSS, - TRxAttr *pRxAttr, - TMacAddr *bssid, - mlmeFrameInfo_t *pFrameInfo, - TI_UINT8 *dataBuffer, - TI_UINT16 bufLength); - -void currBSS_restartRssiCounting(TI_HANDLE hCurrBSS); - -void currBSS_GetDefaultKeepAlivePeriod(TI_HANDLE hCurrBSS, TI_UINT8* uDefaultKeepAlivePeriod); - -void currBss_DbgPrintTriggersTable(TI_HANDLE hCurrBSS); - -#endif /* _CURR_BSS_H_*/ - |