diff options
Diffstat (limited to 'wl1271/utils/CmdInterfaceCodes.h')
-rw-r--r-- | wl1271/utils/CmdInterfaceCodes.h | 1536 |
1 files changed, 0 insertions, 1536 deletions
diff --git a/wl1271/utils/CmdInterfaceCodes.h b/wl1271/utils/CmdInterfaceCodes.h deleted file mode 100644 index ce579db..0000000 --- a/wl1271/utils/CmdInterfaceCodes.h +++ /dev/null @@ -1,1536 +0,0 @@ -/* - * CmdInterfaceCodes.h - * - * Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Texas Instruments nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/****************************************************************************/ -/* */ -/* MODULE: CmdInterfaceCodes.h */ -/* PURPOSE: */ -/* */ -/****************************************************************************/ -#ifndef _CMD_INTERFACE_CODES_H_ -#define _CMD_INTERFACE_CODES_H_ - -/** \file CmdInterfaceCodes.h - * \brief Command Interface Codes - * \n\n - * This file contains the definitions for the parameters that can be Set/Get from outside user. - * \n\n - */ - -#include "TWDriver.h" - -/* defines */ -/***********/ - -/* types */ -/*********/ - - -/* This file contains the definitions for the parameters that can be Set/Get from outside. - The parmeters that can be Set/Get from inside the driver only are defined in the file paramIn.h */ - -/**************************************************************************** - PARAMETERS ISSUE - Each parameter in the system is defined as UINT32. The parameter - structue is as following: - - bit 31 30 - 24 23 22 - 16 15 - 8 7 - 0 - +-----+----------+-----+----------+-----------+-----------+ - | Set | Reserved | Get | Reserved | Module | Parameter | - | bit | | bit | | number | number | - +-----+----------+-----+----------+-----------+-----------+ - - The 'set' bit indicates whteher this parameter can be set from OS abstraction layer. - The 'get' bit indicates whteher this parameter can be get from OS abstraction layer. - (All the parameters can be Get/Set from insied the driver.) - The module number indicated who is the oner of the parameter. - The parameter number is the parameter unique number used to identify it. - -****************************************************************************/ - -/** \def SET_BIT - * \brief Bitmaks of bit which indicates if the Command is SET Command - */ -#define SET_BIT 0x08000000 -/** \def GET_BIT - * \brief Bitmaks of bit which indicates if the Command is GET Command - */ -#define GET_BIT 0x00800000 -/** \def ASYNC_PARAM - * \brief Bitmaks of bit which indicates if the access to the Command Parameter is Async - */ -#define ASYNC_PARAM 0x00010000 -/** \def ALLOC_NEEDED_PARAM - * \brief Bitmaks of bit which indicates if that the data is not allocated in the paramInfo structure - */ -#define ALLOC_NEEDED_PARAM 0x00020000 - - -/** \def GET_PARAM_MODULE_NUMBER - * \brief Macro which gets the Parameter's Module Number from the second byte of x \n - * x should be taken from Module Parameters Enumeration - * sa EModuleParam - */ -#define GET_PARAM_MODULE_NUMBER(x) ((x & 0x0000FF00) >> 8) -/** \def IS_PARAM_ASYNC - * \brief Macro which returns True if access to the Command Parameter is Async \n - * Otherwise returns False - */ -#define IS_PARAM_ASYNC(x) (x & ASYNC_PARAM) -/** \def IS_ALLOC_NEEDED_PARAM - * \brief Macro which returns True if data is not allocated in the paramInfo structure \n - * (there is a need to allocate memory for data). Otherwise returns False - */ -#define IS_ALLOC_NEEDED_PARAM(x) (x & ALLOC_NEEDED_PARAM) -/** \def IS_PARAM_FOR_MODULE - * \brief Macro which returns True if input param is for input module. \n - * Otherwise returns False - */ -#define IS_PARAM_FOR_MODULE(param, module) ((param & 0x0000FF00) == module) - -/** \enum EModuleParam - * \brief Modules Parameters ID - * - * \par Description - * This Enumeration defines all available Modules numbers. \n - * Note that the actual number is held in the second byte (E.g. 0x0000FF00). \n - * According to these numbers it is decided to which Module the Command Parameter is destined - * - * \sa - */ -/* NOTICE! whenever you add a module, you have to increment MAX_PARAM_MODULE_NUMBER as well!!! */ -typedef enum -{ - DRIVER_MODULE_PARAM = 0x0000, /**< Driver Module Number */ - AUTH_MODULE_PARAM = 0x0100, /**< Authentication Module Number */ - ASSOC_MODULE_PARAM = 0x0200, /**< Association Module Number */ - RX_DATA_MODULE_PARAM = 0x0300, /**< RX Data Module Number */ - TX_CTRL_MODULE_PARAM = 0x0400, /**< TX Control Module Number */ - CTRL_DATA_MODULE_PARAM = 0x0500, /**< Control Data Module Number */ - SITE_MGR_MODULE_PARAM = 0x0600, /**< Site Manager Module Number */ - CONN_MODULE_PARAM = 0x0700, /**< Connection Module Number */ - RSN_MODULE_PARAM = 0x0800, /**< Robust Security NW (RSN) Module Number */ - ADM_CTRL_MODULE_PARAM = 0x0900, /**< ADM Control Module Number */ - TWD_MODULE_PARAM = 0x0A00, /**< Report Module Number */ - REPORT_MODULE_PARAM = 0x0B00, /**< Report Module Number */ - SME_MODULE_PARAM = 0x0C00, /**< SME Module Number */ - MLME_SM_MODULE_PARAM = 0x0D00, /**< 802.11 MLME State-Machine Module Number */ - REGULATORY_DOMAIN_MODULE_PARAM = 0x0E00, /**< Regulatory Domain Module Number */ - MEASUREMENT_MODULE_PARAM = 0x0F00, /**< Measurement Module Number */ - XCC_MANAGER_MODULE_PARAM = 0x1000, /**< XCC Manager Module Number */ - ROAMING_MANAGER_MODULE_PARAM = 0x1100, /**< Roaming Manager Module Number */ - SOFT_GEMINI_PARAM = 0x1200, /**< Soft Gemini Module Number */ - QOS_MANAGER_PARAM = 0x1300, /**< Quality Of Service (QoS) Manager Module Number */ - POWER_MANAGER_PARAM = 0x1400, /**< Power Manager Module Number */ - SCAN_CNCN_PARAM = 0x1500, /**< Scan Concentrator Module Number */ - SCAN_MNGR_PARAM = 0x1600, /**< Scan Manager Module Number */ - MISC_MODULE_PARAM = 0x1700, /**< Misc. Module Number */ - HEALTH_MONITOR_MODULE_PARAM = 0x1800, /**< Health Monitor Module Number */ - CURR_BSS_MODULE_PARAM = 0x1900, /**< Current Bss Module Number */ - /* - Last module - DO NOT TOUCH! - */ - MODULE_PARAM_LAST_MODULE /**< LAst Module - Dummy, mast be last */ - -} EModuleParam; - -/** \def MAX_PARAM_MODULE_NUMBER - * \brief Macro which returns the number of Parameters Modules - */ -#define MAX_PARAM_MODULE_NUMBER (GET_PARAM_MODULE_NUMBER(MODULE_PARAM_LAST_MODULE)) - - - -/** \enum EExternalParam - * \brief External Parameters - * - * \par Description - * This Enumeation includes all the eaxternal parameters numbers which are used for Get/Set Commands. - * Each module can have 256 parameters \n - * PARAMETERS ISSUE: \n - * Each parameter in the system is defined as UINT32. The parameter structue is as following: \n - * bit 0 - 7: Parameter Number - number of parameter inside Module\n - * bit 8 - 15: Module number - number of Module\n - * bit 16: Async Bit - indicates if command is Async (ON) or Sync (OFF)\n - * bit 17: Allocate Bit - indicates if allocation should be done for parameter (ON) or not (OFF)\n - * bit 18 - 22: Reserved \n - * bit 23: Get Bit - indicates if command is Get (ON) or not (OFF) \n - * bit 24 - 26: Reserved \n - * bit 27: Set Bit - indicates if command is Set (ON) or not (OFF) \n - * bit 28 - 31: Reserved \n\n - * The 'set' bit indicates whteher this parameter can be set from OS abstraction layer. - * The 'get' bit indicates whteher this parameter can be get from OS abstraction layer. - * (All the parameters can be Get/Set from insied the driver.) - * The module number indicated who is the oner of the parameter. - * The parameter number is the parameter unique number used to identify it. - * - * \sa - */ - /* bit | 31 - 28 | 27 | 26 - 24 | 23 | 22 - 18 | 17 | 16 | 15 - 8 | 7 - 0 | - * +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+ - * | Reserved | Set | Reserved | Get | Reserved | Allocate | Async | Module | Parameter | - * | | bit | | bit | | bit | bit | number | number | - * +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+ - */ -typedef enum -{ - /* Driver General section */ - DRIVER_INIT_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x00, /**< Driver Init Parameter (Driver General Set Command): \n - * Used for setting driver defaults. Done Sync with no memory allocation\n - * Parameter Number: 0x00\n - * Module Number: Driver Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - DRIVER_START_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x01, /**< Driver Start Parameter (Driver General Set Command): \n - * Used for Starting Driver. Done Sync with no memory allocation\n - * Parameter Number: 0x01\n - * Module Number: Driver Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - DRIVER_STOP_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x02, /**< Driver Stop Parameter (Driver General Set Command): \n - * Used for Stopping Driver. Done Sync with no memory allocation \n - * Parameter Number: 0x02\n - * Module Number: Driver Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - DRIVER_STATUS_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x03, /**< Driver Status Parameter (Driver General Get Command): \n - * Used for Getting Driver's Status (if running). Done Sync with no memory allocation\n Done Sync with no memory allocation\n - * Parameter Number: 0x03\n - * Module Number: Driver Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - DRIVER_THREADID_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x04, /**< Driver Thread ID Parameter (Driver General Get Command): \n - * Used for Getting Driver's Thread ID. Done Sync with no memory allocation\n - * Parameter Number: 0x04\n - * Module Number: Driver Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* Site manager section */ - SITE_MGR_DESIRED_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x01, /**< Site Manager Desired Channel Parameter (Site Manager Module Set/Get Command):\n - * Used for Setting/Getting desired Channel to/from OS abstraction layer\n - * Done Sync with no memory allocation \n - * Parameter Number: 0x01\n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_DESIRED_SUPPORTED_RATE_SET_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x05, /**< Site Manager Desired Supported Rate Set Parameter (Site Manager Module Set/Get Command):\n - * Used for Setting/Getting Desired Supported Rate to/from OS abstraction layer\n - * Done Sync with no memory allocation \n - * Parameter Number: 0x05\n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_DESIRED_PREAMBLE_TYPE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0A, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n - * Used for Setting/Getting Desired Preamble Type to/from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0A\ n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - SITE_MGRT_SET_RATE_MANAGMENT = SET_BIT | SITE_MGR_MODULE_PARAM | 0x06 , /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n - * Used for Setting/Getting Desired Preamble Type to/from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06\ n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OF \n - * SET Bit: ON \n -*/ - - - SITE_MGRT_GET_RATE_MANAGMENT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x07| ASYNC_PARAM, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n - * Used for Setting/Getting Desired Preamble Type to/from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x07\ n - * Module Number: Site Manager Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n -*/ - - - - SITE_MGR_CURRENT_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0E, /**< Site Manager Current Channel Parameter (Site Manager Module Set/Get Command): \n - * Used for Setting/Getting Current Channel to/from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0E \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_TI_WLAN_COUNTERS_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x14, /**< Site Manager TI WLAN Counters Parameter (Site Manager Module Get Command): \n - * Used for Getting TI WLAN Statistics Counters from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x14 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_EEPROM_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x16, /**< Site Manager EEPROM Version Parameter (Site Manager Module Get Command): \n - * Used for Getting EEPROM Version from FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x16 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_FIRMWARE_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x17, /**< Site Manager FW Version Parameter (Site Manager Module Get Command): \n - * Used for Getting FW Version from FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x17 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_DESIRED_SLOT_TIME_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x1B, /**< Site Manager Desired Slot Time Parameter (Site Manager Module Set/Get Command): \n - * Used for Getting Desired Slot Time from OS abstraction layer and Setting Desired Slot Time to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x1B \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_GET_AP_QOS_CAPABILITIES = GET_BIT | SITE_MGR_MODULE_PARAM | 0x2E, /**< Site Manager Get AP QoS Cpabilities Parameter (Site Manager Module Get Command): \n - * Used for Getting AP QoS Cpabilities from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x2E \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_CURRENT_TX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x32, /**< Site Manager Current TX Rate Parameter (Site Manager Module Get Command): \n - * Used for Getting Current TX Rate from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x32 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_BSSID_FULL_LIST_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x34, /**< Site Manager BSSID Full List Parameter (Site Manager Module Get Command): \n - * Used for Getting BSSID Full List from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x34 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_BEACON_FILTER_DESIRED_STATE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x35, /**< Site Manager Beacon Filter Desired State Parameter (Site Manager Module Set/Get Command): \n - * Used for Getting Beacon Filter Desired State from OS abstraction layer or Setting Beacon Filter Desired State to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x35 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_NETWORK_TYPE_IN_USE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x36, /**< Site Manager NW Type in Use Parameter (Site Manager Module Get Command): \n - * Used for Getting NW Type in Use from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x36 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* Simple Config module */ - SITE_MGR_SIMPLE_CONFIG_MODE = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x38, /**< Site Manager Simple Configuration Mode Parameter (Simple Configuration Module Set/Get Command): \n - * Used for Setting/Getting WiFi Simple Configuration Mode\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x38 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SITE_MGR_GET_PRIMARY_SITE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x40, /**< Site Manager Get Primary Site Parameter (Simple Configuration Module Get Command): \n - * Used for Getting Primary Site from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x40 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - SITE_MGR_PRIMARY_SITE_HT_SUPPORT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x41, /**< Site Manager check if the Primary Site support HT: \n - * Used for check if the Primary Site support HT \n - * Done Sync with no memory allocation\n - * Parameter Number: 0x41 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_CURRENT_RX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x42, /**< Site Manager Current RX Rate Parameter (Site Manager Module Get Command): \n - * Used for Getting Current RX Rate from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x33 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SITE_MGR_SET_WLAN_IP_PARAM = SET_BIT | SITE_MGR_MODULE_PARAM | 0x43, /**< Site Manager WLAN interface IP Parameter (Site Manager Module Set Command): \n - * Used for Setting the WLAN interface IP from OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x43 \n - * Module Number: Site Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* CTRL data section */ - CTRL_DATA_CURRENT_BSS_TYPE_PARAM = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x04, /**< Control Data Primary BSS Type Parameter (Control Data Module Set/Get Command): \n - * Used for Setting/Getting Primary BSS Type to/form Control Data Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - CTRL_DATA_MAC_ADDRESS = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x08, /**< Control Data MAC Address Parameter (Control Data Module Get Command): \n - * Used for Getting MAC Address form FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x08 \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - CTRL_DATA_CLSFR_TYPE = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x0D, /**< Control Data Classifier Type Parameter (Control Data Module Set/Get Command): \n - * Used for Setting/Getting Classifier Type to/form Control Data (TX Data Queue) Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0D \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - CTRL_DATA_CLSFR_CONFIG = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0E, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n - * Used for adding Classifier entry to Control Data (TX Data Queue) Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0E \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - CTRL_DATA_CLSFR_REMOVE_ENTRY = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0F, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n - * Used for removing Classifier entry from Control Data (TX Data Queue) Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0F \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - CTRL_DATA_TRAFFIC_INTENSITY_THRESHOLD = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x15, /**< Control Data Traffic Intensity Threshold Parameter (Control Data Module Set/Get Command): \n - * Used for Setting/Getting Traffic Intensity Threshold to/from Control Data (Traffic Intensity Threshold) Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x15 \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - CTRL_DATA_TOGGLE_TRAFFIC_INTENSITY_EVENTS = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x16, /**< Control Data Toggle Traffic Intensity Events Parameter (Control Data Module Set Command): \n - * Used for Toggle Traffic Intensity Events (turns ON/OFF traffic intensity notification events) \n - * Done Sync with no memory allocation\n - * Parameter Number: 0x16 \n - * Module Number: Control Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* SME SM section */ - SME_DESIRED_SSID_ACT_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x01, /**< SME Set SSID and start connection process (SME Module Set/Get Command): \n - * Used for set SSID and start connection or get current SSID \n - * Parameter Number: 0x01 \n - * Module Number: SME Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - SME_RADIO_ON_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x03, /**< SME State-Machine Radio ON Parameter (SME Module Set/Get Command): \n - * Used for Setting new and generating State-Machine Event, or Getting current Radio ON\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: SME Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SME_CONNECTION_MODE_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x04, /**< SME State-Machine Connection Mode Parameter (SME Module Set/Get Command): \n - * Used for Setting new Connection Mode (and generating disconnect State-Machine event) or Getting current Connection Mode\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: SME Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - SME_WSC_PB_MODE_PARAM = SET_BIT | SME_MODULE_PARAM | 0x07, /**< SME State-Machine SME on the WPS Mode Parameter (SME Module Set Command): \n - * Used for updating the SME on the WPS mode\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x07 \n - * Module Number: SME Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - SME_DESIRED_SSID_PARAM = SET_BIT | SME_MODULE_PARAM | 0x08, /**< SME Set SSID without start connection process (SME Module Set Command): \n - * Used for set SSID without connection \n - * Parameter Number: 0x08 \n - * Module Number: SME Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* Scan Concentrator section */ - SCAN_CNCN_START_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Application Scan Parameter (Scan Concentrator Module Set Command): \n - * Used for start one-shot scan as running application scan client\n - * Done Sync with memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_CNCN_STOP_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x02, /**< Scan Concentrator Stop Application Scan Parameter (Scan Concentrator Module Set Command): \n - * Used for stop one-shot scan as running application scan client\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_CNCN_START_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x03 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Periodic Scan Parameter (Scan Concentrator Module Set Command): \n - * Used for start periodic scan as running application scan client\n - * Done Sync with memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_CNCN_STOP_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x04, /**< Scan Concentrator Stop Periodic Scan Parameter (Scan Concentrator Module Set Command): \n - * Used for stop periodic scan as running application scan client\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_CNCN_BSSID_LIST_SCAN_PARAM = SET_BIT | SCAN_CNCN_PARAM | 0x05, /**< Scan Concentrator BSSID List Scon Parameter (Scan Concentrator Module Set Command): \n - * Used for start one-shot scan as running application scan client\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x05 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_CNCN_NUM_BSSID_IN_LIST_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x06, /**< Scan Concentrator BSSID List Size Parameter (Scan Concentrator Module Get Command): \n - * Used for retrieving the size to allocate for the application scan result list\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SCAN_CNCN_BSSID_LIST_SIZE_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x07, /**< Scan Concentrator BSSID List Size Parameter (Scan Concentrator Module Get Command): \n - * Used for retrieving the size to allocate for the application scan result list\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SCAN_CNCN_BSSID_LIST_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x08, /**< Scan Concentrator BSSID List Parameter (Scan Concentrator Module Get Command): \n - * Used for retrieving the application scan result table\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x07 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SCAN_CNCN_BSSID_RATE_LIST_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x09, /**< Scan Concentrator Rate List Parameter (Scan Concentrator Module Get Command): \n - * Used for retrieving the application scan rates result table\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x08 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - SCAN_CNCN_SET_SRA = SET_BIT | SCAN_CNCN_PARAM | 0x0A, /**< Scan Concentrator set scan result aging (Scan Concentrator Module Get Command): \n - * Used for aging threshold\n - * Parameter Number: 0x09 \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - SCAN_CNCN_SET_RSSI = SET_BIT | SCAN_CNCN_PARAM | 0x0B, /**< Scan Concentrator set rssi filter threshold (Scan Concentrator Module Get Command): \n - * Used for rssi threshold\n - * Parameter Number: 0x0A \n - * Module Number: Scan Concentrator Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* Scan Manager module */ - SCAN_MNGR_SET_CONFIGURATION = SET_BIT | SCAN_MNGR_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Manager Set Configuration Parameter (Scan Manager Module Set Command): \n - * Used for setting the Scan Policy\n - * Done Sync with memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Scan Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SCAN_MNGR_BSS_LIST_GET = GET_BIT | SCAN_MNGR_PARAM | 0x02 | ALLOC_NEEDED_PARAM, /**< Scan Manager Get BSS List Parameter (Scan Manager Module Get Command): \n - * Used for getting the currently available BSS list\n - * Done Sync with memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Scan Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* regulatory domain section */ - REGULATORY_DOMAIN_MANAGEMENT_CAPABILITY_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x02, /**< Regulatory Domain Management Capability Enabled Parameter (Regulatory Domain Module Get Command): \n - * Used for getting indication if Spectrum Management is enabled\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - REGULATORY_DOMAIN_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x03, /**< Regulatory Domain Enabled Parameter (Regulatory Domain Module Get Command): \n - * Used for getting indication if regulatory domain if 802.11d is in use\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - REGULATORY_DOMAIN_CURRENT_TX_POWER_LEVEL_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x06, /**< Regulatory Domain Current TX Power Level Parameter (Regulatory Domain Module Set/Get Command): \n - * Used for setting/getting current TZ Power Level\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_CURRENT_TX_POWER_IN_DBM_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x08, /**< Regulatory Domain Current TX Power in DBM Parameter (Regulatory Domain Module Set/Get Command): \n - * Used for setting/getting current TX Power Level in DBM\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x08 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_ENABLE_DISABLE_802_11D = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0C, /**< Regulatory Domain Enable/Disable 802.11d Parameter (Regulatory Domain Module Set Command): \n - * Used for enabling/disabling 802.11d.\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0C \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_ENABLE_DISABLE_802_11H = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0D, /**< Regulatory Domain Enable/Disable 802.11h Parameter (Regulatory Domain Module Set Command): \n - * Used for enabling/disabling 802.11h (If 802_11h is enabled, enable 802_11d as well)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0D \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_COUNTRY_2_4_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0E | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 2-4 Parameter (Regulatory Domain Module Set/Get Command): \n - * Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n - * Done Sync with memory allocation\n - * Parameter Number: 0x0E \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_COUNTRY_5_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0F | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 5 Parameter (Regulatory Domain Module Set/Get Command): \n - * Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n - * Done Sync with memory allocation\n - * Parameter Number: 0x0F \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_DFS_CHANNELS_RANGE = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x10, /**< Regulatory Domain DFS Channels Parameter (Regulatory Domain Module Set/Get Command): \n - * Used for config manager in order to set/get a parameter received from the OS abstraction layer\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x10 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REGULATORY_DOMAIN_TX_POWER_LEVEL_TABLE_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x12, /**< Regulatory Domain TX Power Level Table Parameter (Regulatory Domain Module Get Command): \n - * Used for getting TX Power Level Table from FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x12 \n - * Module Number: Regulatory Domain Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* Power Manager params */ - POWER_MGR_POWER_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x01, /**< Power Manager Power Mode Parameter (Power Manager Module Set/Get Command): \n - * Used for setting/getting the Power Mode to/from Power Manager Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - POWER_MGR_POWER_LEVEL_PS = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x02, /**< Power Manager Power Level Power-Save Parameter (Power Manager Module Set/Get Command): \n - * Used for getting the Power Level Power-Save from Power Manager Module or setting the Power Level Power-Save to Power Manager Module (and to FW if Power-Save is Enabled)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - POWER_MGR_POWER_LEVEL_DEFAULT = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x03, /**< Power Manager Power Level Default Parameter (Power Manager Module Set/Get Command): \n - * Used for getting the Power Level Default from Power Manager Module or setting the Power Level Default to Power Manager Module (and to FW if Power-Save is Enabled)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - POWER_MGR_POWER_LEVEL_DOZE_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x04, /**< Power Manager Power Level Doze Mode (short-doze / long-doze) Parameter (Power Manager Module Set/Get Command): \n - * Used for getting the Power Level Doze Mode from Power Manager Module or setting the Power Level Doze Mode to Power Manager Module (and to FW if Power-Save is Enabled)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - POWER_MGR_KEEP_ALIVE_ENA_DIS = SET_BIT | POWER_MANAGER_PARAM | 0x05, /**< Power Manager Keep Alive Enable/Disable Parameter (Power Manager Module Set Command): \n - * Used for setting the Keep Alive Enable/Disable to Power Manager and FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x05 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - POWER_MGR_KEEP_ALIVE_ADD_REM = SET_BIT | POWER_MANAGER_PARAM | 0x06 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive add REM Parameter (Power Manager Module Set Command): \n - * Used for setting addition/removal of a template and global enable/disable flag to Power Manager and FW\n - * Done Sync with memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - POWER_MGR_KEEP_ALIVE_GET_CONFIG = GET_BIT | POWER_MANAGER_PARAM | 0x07 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive Get Configuration Parameter (Power Manager Module Get Command): \n - * Used for getting the Keep Alive current Configuration\n - * Done Sync with memory allocation\n - * Parameter Number: 0x07 \n - * Module Number: Power Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - - POWER_MGR_GET_POWER_CONSUMPTION_STATISTICS = GET_BIT | POWER_MANAGER_PARAM | 0x09| ASYNC_PARAM, /**< Power Manager Get power consumption parmeter (Power Manager Module Get Command): \n - * Used for getting the Keep Alive current Configuration\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x08 \n - * Module Number: Power Manager Module Number \n - * Async Bit: ON \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - - - - /* Robust Security NW (RSN) section */ - RSN_ENCRYPTION_STATUS_PARAM = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x04, /**< Robust Security NW (RSN) Encryption Status Parameter (RSN Module Set/Get Command): \n - * Used for setting/getting Encryption Status to/from RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - RSN_ADD_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x05, /**< Robust Security NW (RSN) Add Key Parameter (RSN Module Set Command): \n - * Used for adding RSN Key to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x05 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - RSN_REMOVE_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x06, /**< Robust Security NW (RSN) Remove Key Parameter (RSN Module Set Command): \n - * Used for removing RSN Key from FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - RSN_EXT_AUTHENTICATION_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x07, /**< Robust Security NW (RSN) External Authentication Mode Parameter (RSN Module Set/Get Command): \n - * Used for getting RSN External Authentication Mode from RSN Module or setting RSN External Authentication Mode to FW and RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x07 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - RSN_MIXED_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x08, /**< Robust Security NW (RSN) Mixed Mode Parameter (RSN Module Set/Get Command): \n - * Used for setting/getting RSN Mixed Mode to/from RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x08 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - RSN_DEFAULT_KEY_ID = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x09, /**< Robust Security NW (RSN) Defualt Key ID Parameter (RSN Module Set/Get Command): \n - * Used for getting RSN defualt Key ID from RSN Module or setting RSN defualt Key ID to FW and RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x09 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - RSN_XCC_NETWORK_EAP = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x0A, /**< Robust Security NW (RSN) XCC NW EAP Parameter (RSN Module Set/Get Command): \n - * Used for setting/getting RSN XCC NW EAP to/from RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0B \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - RSN_SET_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x0B, /**< Robust Security NW (RSN) Set Key Parameter (RSN Module Set/Get Command): \n - * Used for setting Keys during external RSN mode to RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0B \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - - - RSN_SET_PROTECTION_RX_PARAM = SET_BIT | RSN_MODULE_PARAM | ASYNC_PARAM | 0x0C, /**< Robust Security NW (RSN) Set Protection RX Parameter (RSN Module Set/Get Command): \n - * Used for setting protection for RX during external RSN mode to RSN Module\n - * Done ASync with no memory allocation\n - * Parameter Number: 0x0C \n - * Module Number: RSN Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - - RSN_SET_PROTECTION_RX_TX_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x0D, /**< Robust Security NW (RSN) Set Protection RX TX Parameter (RSN Module Set/Get Command): \n - * Used for setting protection for both RX and TX during external RSN mode to RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0C \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - RSN_PORT_STATUS_PARAM = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x0D, /**< Robust Security NW (RSN) Port Status (RSN Module Set/Get Command): \n - * Used for setting port status during external RSN mode to RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0D \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - RSN_GENERIC_IE_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x0E, /**< Robust Security NW (RSN) Generic IE (RSN Module Set Command): \n - * Used for setting the Generic IE passed to the AP during association to RSN Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0E \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - RSN_EXTERNAL_MODE_PARAM = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x0F, /**< Robust Security NW (RSN) External Mode Parameter: \n - * Used for getting the RSN External Mode\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x0F \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - RSN_GEM_DATA_PARAM = RSN_MODULE_PARAM | 0x10, /**< Robust Security NW (RSN) External Mode Parameter: \n - * Used for setting GEM data\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x10 \n - * Module Number: RSN Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - - /* TWD Control section */ - TWD_RTS_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RTS_THRESHOLD_PARAM_ID, /**< TWD Control RTS Threshold Parameter (TWD Control Module Set/Get Command): \n - * Used for getting RTS Threshold from TWD Control Module or setting RTS Threshold to FW and TWD Control Module\n - * Done Sync with no memory allocation\n - * Parameter Number: TWD_RTS_THRESHOLD_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - TWD_FRAG_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_FRAG_THRESHOLD_PARAM_ID, /**< TWD Control Fragmentation Threshold Parameter (TWD Control Module Set/Get Command): \n - * Used for getting Fragmentation Threshold from TWD Control Module or setting Fragmentation Threshold to FW and TWD Control Module\n - * Done Sync with no memory allocation\n - * Parameter Number: TWD_FRAG_THRESHOLD_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - TWD_RSSI_LEVEL_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_RSSI_LEVEL_PARAM_ID | ASYNC_PARAM, /**< TWD Control RSSI Level Parameter (TWD Control Module Get Command): \n - * Used for getting RSSI Level From FW\n - * Done Async with no memory allocation\n - * Parameter Number: TWD_RSSI_LEVEL_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - TWD_SNR_RATIO_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_SNR_RATIO_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Get Command): \n - * Used for getting SNR Radio From FW (same outcome as TWD_RSSI_LEVEL_PARAM)\n - * Done Async with no memory allocation\n - * Parameter Number: TWD_SNR_RATIO_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /*for BIP/PLT/Radio Debug Tests --> supports Set + GET*/ - TWD_RADIO_TEST_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RADIO_TEST_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Set/Get Command): \n - * Used for performing BIP/PLT/Radio Debug Tests\n - * Done Async with no memory allocation\n - * Parameter Number: TWD_RADIO_TEST_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - TWD_FM_COEX_PARAM = SET_BIT | TWD_MODULE_PARAM | TWD_FM_COEX_PARAM_ID, /**< TWD Control FM-Coexistence Parameters (TWD Control Module Set/Get Command): \n - * Used for setting the FM-Coexistence Parameters\n - * Done Async with no memory allocation\n - * Parameter Number: TWD_FM_COEX_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - TWD_DCO_ITRIM_PARAMS = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_DCO_ITRIM_PARAMS_ID, /**< TWD Control DCO Itrim Parameters (TWD Control Module Set/Get Command): \n - * Used for getting DCO Itrim Parameters from TWD Control Module or setting DCO Itrim Parameters to FW and TWD Control Module\n - * Done Sync with no memory allocation\n - * Parameter Number: TWD_DCO_ITRIM_PARAMS_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - /* Roaming manager */ - ROAMING_MNGR_APPLICATION_CONFIGURATION = SET_BIT | GET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x01, /**< Roaming Manager Application Configuration Parameter (Roaming Manager Module Set/Get Command): \n - * Used for setting/getting Roaming Manager Application Configuration to/from Roaming Manager Module and State-Machine\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Roaming Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - ROAMING_MNGR_USER_DEFINED_TRIGGER = SET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x02, /**< Roaming Manager User Defined Trigger Parameter (Roaming Manager Module Set Command): \n - * Used for setting user-defined trigger to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Roaming Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* QOS manager params */ - QOS_MNGR_SET_OS_PARAMS = SET_BIT | QOS_MANAGER_PARAM | 0x10, /**< QoS Manager Set OS Parameter (QoS Module Set Command): \n - * Used for setting Quality Of Service Manager's Parameters\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x10 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - QOS_MNGR_AP_QOS_PARAMETERS = GET_BIT | QOS_MANAGER_PARAM | 0x11, /**< QoS Manager AP QoS Parameter (QoS Module Get Command): \n - * Used for getting current AP QoS Parameters from QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x11 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - QOS_MNGR_OS_TSPEC_PARAMS = GET_BIT | QOS_MANAGER_PARAM | 0x12, /**< QoS Manager OS TSPEC Parameter (QoS Module Get Command): \n - * Used for getting current OS 802.11 QoS TSPEC Parameters from QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x12 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - QOS_MNGR_AC_STATUS = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x13, /**< QoS Manager AC Status Parameter (QoS Module Set/Get Command): \n - * Used for setting/getting SC Status\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x13 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - QOS_MNGR_ADD_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x14, /**< QoS Manager Add TSPEC Request Parameter (QoS Module Set Command): \n - * Used for setting TSPEC Parameters to QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x14 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - QOS_MNGR_DEL_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x15, /**< QoS Manager Delete TSPEC Request Parameter (QoS Module Set Command): \n - * Used for deleting TSPEC Parameters from QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x15 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - QOS_MNGR_GET_DESIRED_PS_MODE = GET_BIT | QOS_MANAGER_PARAM | 0x17, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Get Command): \n - * Used for getting the current desired Power-Save Mode from QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x17 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - QOS_SET_RX_TIME_OUT = SET_BIT | QOS_MANAGER_PARAM | 0x18, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Set Command): \n - * Used for setting RX Time Out (PS poll and UPSD) to FW and in QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x18 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - QOS_MNGR_PS_RX_STREAMING = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x19, /**< QoS Manager Set Power-Save RX Streaming Parameter (QoS Module Set/Get Command): \n - * Used for getting Power-Save RX Streaming or setting Power-Save RX Streaming to FW and in QoS Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x19 \n - * Module Number: QoS Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - /* Soft Gemini params */ - SOFT_GEMINI_SET_ENABLE = SET_BIT | SOFT_GEMINI_PARAM | 0x01, /**< Soft Gimini Parameters Set Enable Parameter (Soft Gimini Parameters Module Set Command): \n - * Used for configuring Soft Gimini enable Mode (Enable|Disable|Auto) in FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Soft Gimini Parameters Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SOFT_GEMINI_SET_CONFIG = SET_BIT | SOFT_GEMINI_PARAM | 0x03, /**< Soft Gimini Parameters Set Configuration Parameter (Soft Gimini Parameters Module Set Command): \n - * Used for setting Soft Gimini Configuration to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: Soft Gimini Parameters Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - SOFT_GEMINI_GET_CONFIG = GET_BIT | SOFT_GEMINI_PARAM | 0x04, /**< Soft Gimini Parameters Get Configuration Parameter (Soft Gimini Parameters Module Get Command): \n - * Used for getting Soft Gimini Configuration\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Soft Gimini Parameters Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - /* REPORT section */ - REPORT_MODULE_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x01, /**< Report Module Table Parameter (Report Module Set/Get Command): \n - * Used for setting/getting Report Module Table (Tble of all Logged Modules)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REPORT_SEVERITY_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x02, /**< Report Severity Table Parameter (Report Module Set/Get Command): \n - * Used for setting/getting the Severity Table (holds availble severity Levels of the event which is reported to user)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REPORT_MODULE_ON_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x03, /**< Report Module ON Parameter (Report Module Set/Get Command): \n - * Used for setting (Enable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REPORT_MODULE_OFF_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x04, /**< Report Module OFF Parameter (Report Module Set/Get Command): \n - * Used for setting (Disable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REPORT_PPMODE_VALUE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x05, /**< Report PP MODE Value Parameter (Report Module Set/Get Command): \n - * Used for setting (Enable/Disable) or Getting the Debug Mode flag, which indicates whether debug module should be used or not\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x05 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - REPORT_OUTPUT_TO_LOGGER_ON = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x06, /**< Report output ON Parameter (Report Module Set/Get Command): \n - * Used for setting the output of logs to the logger application\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - REPORT_OUTPUT_TO_LOGGER_OFF = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x07,/**< Report output OFF Parameter (Report Module Set/Get Command): \n - * Used for setting OFF the output of logs to the logger application\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: Report Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - - /* TX data section */ - TX_CTRL_COUNTERS_PARAM = GET_BIT | TX_CTRL_MODULE_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< TX Control Counters Parameter (TX Control Module Get Command): \n - * Used for getting TX statistics per Tx-queue\n - * Done Sync with memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: TX Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: ON \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - TX_CTRL_RESET_COUNTERS_PARAM = SET_BIT | TX_CTRL_MODULE_PARAM | 0x02, /**< TX Control Reset Counters Parameter (TX Control Module Set Command): \n - * Used for Reset all TX statistics per Tx-queue\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: TX Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - TX_CTRL_SET_MEDIUM_USAGE_THRESHOLD = SET_BIT | TX_CTRL_MODULE_PARAM | 0x03, /**< TX Control Set Medum Usage Threshold Parameter (TX Control Module Set Command): \n - * Used for setting Medum Usage Threshold of AC\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: TX Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - TX_CTRL_GENERIC_ETHERTYPE = SET_BIT | GET_BIT | TX_CTRL_MODULE_PARAM | 0x10, /**< TX Control Get/Set Generic Ethertype (TX Control Module Get/Set Command): \n - * Used for setting the Generic Ethertype for authentication packets\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x10 \n - * Module Number: TX Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - /* RX data section */ - RX_DATA_ENABLE_DISABLE_RX_DATA_FILTERS = SET_BIT | GET_BIT | RX_DATA_MODULE_PARAM | 0x04, /**< RX Data Enable/Disable Filters Parameter (RX Data Module Set/Get Command): \n - * Used for Enabling/Disabling Filters in FW or getting the Filters Enabling/Disabling current Status\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x04 \n - * Module Number: RX Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - RX_DATA_ADD_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x05, /**< RX Data Add Filter Parameter (RX Data Module Set Command): \n - * Used for adding RX Data Filter to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x05 \n - * Module Number: RX Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - RX_DATA_REMOVE_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x06, /**< RX Data Remove Filter Parameter (RX Data Module Set Command): \n - * Used for removing RX Data Filter from FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x06 \n - * Module Number: RX Data Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - RX_DATA_GET_RX_DATA_FILTERS_STATISTICS = GET_BIT | RX_DATA_MODULE_PARAM | 0x07 | ASYNC_PARAM, /**< RX Data Get RX Data Filter Statistics Parameter (RX Data Module Get Command): \n - * Used for getting RX Data Filter Statistics from FW\n - * Done Async with no memory allocation\n - * Parameter Number: 0x07 \n - * Module Number: RX Data Module Number \n - * Async Bit: ON \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: OFF \n - */ - - - /* measurement section */ - MEASUREMENT_ENABLE_DISABLE_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x01, /**< Measurement Enable/Disable Parameter (Measurement Module Set Command): \n - * Used for Enabling/Disabling Measurement Management Module\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Measurement Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - MEASUREMENT_MAX_DURATION_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x02, /**< Measurement Maximum Duration Parameter (Measurement Module Set Command): \n - * Used for updating the Maximum Duration on non serving channel\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x02 \n - * Module Number: Measurement Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* XCC */ - XCC_CONFIGURATION = SET_BIT | GET_BIT | XCC_MANAGER_MODULE_PARAM | 0x01, /**< XCC Manager Configuration Parameter (XCC Manager Module Set/Get Command): \n - * Used for setting or getting XCC configuration (RogueAP, CCKM, CKIP, All)\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: XCC Manager Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: ON \n - * SET Bit: ON \n - */ - - /* MISC section */ - DEBUG_ACTIVATE_FUNCTION = SET_BIT | MISC_MODULE_PARAM | 0x03, /**< Debug Activate Function Parameter (MISC Module Set Command): \n - * Used for performing debug function\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x03 \n - * Module Number: MISC Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* Health Monitoring section */ - HEALTH_MONITOR_CHECK_DEVICE = SET_BIT | HEALTH_MONITOR_MODULE_PARAM | 0x01, /**< Health Monitoring Check Device Parameter (Health Monitoring Module Set Command): \n - * Used for sending health check command to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Health Monitoring Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* TWD CoexActivity table */ - TWD_COEX_ACTIVITY_PARAM = SET_BIT | TWD_MODULE_PARAM | TWD_COEX_ACTIVITY_PARAM_ID, /**< TWD Control CoexActivity Parameter (TWD Control Module Set/Get Command): \n - * Used for getting RTS Threshold from TWD Control Module or setting RTS Threshold to FW and TWD Control Module\n - * Done Sync with no memory allocation\n - * Parameter Number: TWD_COEX_ACTIVITY_PARAM_ID \n - * Module Number: TWD Control Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - /* CurrBss Section */ - CURR_BSS_REGISTER_LINK_QUALITY_EVENT_PARAM = SET_BIT | CURR_BSS_MODULE_PARAM | 0x01, /**< CurrBss User Defined Trigger Parameter (Roaming Manager Module Set Command): \n - * Used for setting user-defined trigger to FW\n - * Done Sync with no memory allocation\n - * Parameter Number: 0x01 \n - * Module Number: Curr Bss Module Number \n - * Async Bit: OFF \n - * Allocate Bit: OFF \n - * GET Bit: OFF \n - * SET Bit: ON \n - */ - - LAST_CMD = 0x00 /**< Last External Parameter - Dummy, Should always stay Last */ - -} EExternalParam; - -/* functions */ -/*************/ - -#endif /* _CMD_INTERFACE_CODES_H_ */ - |