diff options
Diffstat (limited to 'tuner/res/values/strings.xml')
-rw-r--r-- | tuner/res/values/strings.xml | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/tuner/res/values/strings.xml b/tuner/res/values/strings.xml new file mode 100644 index 00000000..58d7214c --- /dev/null +++ b/tuner/res/values/strings.xml @@ -0,0 +1,219 @@ +<?Xm version="1.0" encoding="utf-8"?> +<!-- + ~ Copyright (C) 2015 The Android Open Source Project + ~ + ~ Licensed under the Apache License, Version 2.0 (the "License"); + ~ you may not use this file except in compliance with the License. + ~ You may obtain a copy of the License at + ~ + ~ http://www.apache.org/licenses/LICENSE-2.0 + ~ + ~ Unless required by applicable law or agreed to in writing, software + ~ distributed under the License is distributed on an "AS IS" BASIS, + ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + ~ See the License for the specific language governing permissions and + ~ limitations under the License. + --> + +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + <!-- Name of this application. It appears in TV app UI, as one of available TV inputs. --> + <string name="bt_app_name">TV Tuner</string> + <!-- Name of this application when one uses USB tuners. It appears in TV app UI, as one of + available TV inputs. --> + <string name="ut_app_name">USB TV Tuner</string> + <!-- Name of this application when one uses network tuners. It appears in TV app UI, as one of + available TV inputs. --> + <string name="nt_app_name">Network TV Tuner (BETA)</string> + <!-- Message shown when the scanning process is being canceled by a user and the scanning + process needs the time to wait to finish the processing --> + <string name="ut_setup_cancel">Please wait to finish processing</string> + <!-- Message shown when the scanned channels became invalid due to incompatible changes + found across application versions, hence a user is required to rescan the channels --> + <string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the + channels.</string> + <!-- Message that says audio of the current channel is not available due to surround sound + of TV device disabled --> + <string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string> + <!-- Message that says audio of the current channel is not available due to AC3 passthrough is not usable --> + <string name="audio_passthrough_not_supported">Cannot play audio. Please try another TV</string> + <!-- Usb Tuner setup common UI breadcrumb --> + <string name="ut_setup_breadcrumb">Channel tuner setup</string> + <!-- Title for TV Tuner main setup menu when no channel exists --> + <string name="bt_setup_new_title">TV Tuner setup</string> + <!-- Title for USB tuner main setup menu when no channel exists --> + <string name="ut_setup_new_title">USB channel tuner setup</string> + <!-- Title for network tuner main setup menu when no channel exists --> + <string name="nt_setup_new_title">Network tuner setup</string> + <!-- Description for TV tuner main setup menu when no channel exists --> + <string name="bt_setup_new_description">Verify your TV is connected to a TV signal + source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or + direction to receive the most channels. For best results, place it high and near a + window.</string> + <!-- Description for USB tuner main setup menu when no channel exists --> + <string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected + to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its + placement or direction to receive the most channels. For best results, + place it high and near a window.</string> + <!-- Description for network tuner main setup menu when no channel exists --> + <string name="nt_setup_new_description">Verify the network tuner is powered on and connected + to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its + placement or direction to receive the most channels. For best results, + place it high and near a window.</string> + <!-- Menu items for USB tuner main setup menu when no channel exists --> + <string-array name="ut_setup_new_choices"> + <!-- Continue setup --> + <item>Continue</item> + <!-- Exit setup --> + <item>Not now</item> + </string-array> + <!-- Title for tuner main setup menu when channel exists already --> + <string name="bt_setup_again_title">Rerun channel setup?</string> + <!-- Description for TV tuner main setup menu when channel exists already --> + <string name="bt_setup_again_description">This will remove the channels found from the TV + tuner and scan for new channels again.\n\nVerify your TV is connected to a TV signal + source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or + direction to receive the most channels. For best results, place it high and near a + window.</string> + <!-- Description for USB tuner main setup menu when channel exists already --> + <string name="ut_setup_again_description">This will remove the channels found from the USB + tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected + to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its + placement or direction to receive the most channels. For best results, place it high and + near a window.</string> + <!-- Description for network tuner main setup menu when channel exists already --> + <string name="nt_setup_again_description">This will remove the channels found from the network + tuner and scan for new channels again.\n\nVerify the network tuner is powered on and + connected to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust + its placement or direction to receive the most channels. For best results, place it high and + near a window.</string> + <!-- Menu items for USB tuner main setup menu when channel exists already --> + <string-array name="ut_setup_again_choices"> + <!-- Continue setup --> + <item>Continue</item> + <!-- Exit setup --> + <item>Cancel</item> + </string-array> + <!-- Title for connection type selection menu --> + <string name="ut_connection_title">Select the connection type</string> + <!-- Description for connection type selection menu --> + <string name="ut_connection_description">Choose Antenna if there is an external antenna + connected to the tuner. Choose Cable if your channels come from a cable service provider. + If you are not sure, both types will be scanned, but this may take longer.</string> + <!-- Menu items for connection type selection menu --> + <string-array name="ut_connection_choices"> + <!-- Signal coming from the antenna that carries over-the-air, terrestrial channels --> + <item>Antenna</item> + <!-- Signal for cable television channels --> + <item>Cable</item> + <!-- Not sure what type of connection is provided for channel scanning --> + <item>Not sure</item> + <item translatable="false">Development only</item> + </string-array> + <!-- Title for channel scanning menu. Use this title with built-in tuners --> + <string name="bt_channel_scan">TV tuner setup</string> + <!-- Title for channel scanning menu. Use this title with USB tuners --> + <string name="ut_channel_scan">USB channel tuner setup</string> + <!-- Title for channel scanning menu. Use this title with network tuners --> + <string name="nt_channel_scan">Network channel tuner setup</string> + <!-- Message that says channel is not yet scanned during channel scanning process --> + <string name="ut_channel_scan_time">This may take several minutes</string> + <!-- Message that says Tuner is not available --> + <string name="ut_channel_scan_tuner_unavailable">Tuner is temporarily not available or already + used by recording.</string> + <!-- Message that says channels are found during channel scanning process --> + <plurals name="ut_channel_scan_message"> + <item quantity="one">%1$d channel found</item> + <item quantity="other">%1$d channels found</item> + </plurals> + <!-- Title for a button which will stop channel scanning process --> + <string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string> + + <!-- Title for lineup selection menu when TV lineups are found --> + <string name="ut_lineup_title_lineups_found" >Select a TV lineup</string> + <!-- Description for lineup selection menu when TV lineups are found.--> + <string name="ut_lineup_description_lineups_found" >Choose how you receive your TV signal.</string> + <!-- Title for lineup selection menu when no TV lineups is found --> + <string name="ut_lineup_title_lineups_not_found" >No TV lineups found</string> + <!-- Description for lineup selection menu when no TV lineups is found --> + <string name="ut_lineup_description_lineups_not_found" >Please make sure your device is connected to the internet and the zip code / postal code is correct.</string> + <!-- Title for lineup selection menu when fetching lineups --> + <string name="ut_lineup_title_fetching_lineups">Fetching TV lineups…</string> + <!-- Description for lineup selection menu when fetching lineups --> + <string name="ut_lineup_description_fetching_lineups">This may take a few minutes. Please wait…</string> + <!-- Description for a button when no channels match --> + <string name="ut_lineup_no_channels_matched">No channels match</string> + <!-- Number of matched channels for lineup selection menu when lineups were found --> + <plurals name="ut_lineup_channels_matched"> + <item quantity="one"><xliff:g id="channels_matched_one">%1$d</xliff:g> channel matches</item> + <item quantity="other"><xliff:g id="channels_matched_other">%1$d</xliff:g> channels match</item> + </plurals> + <!-- A button to select a specific TV lineup of channels for the channels received by a "Television Antenna" --> + <string name="ut_lineup_name_antenna">Antenna</string> + <!-- Title for channel scanning result menu when channels were found --> + <plurals name="ut_result_found_title"> + <item quantity="one">%1$d channel found</item> + <item quantity="other">%1$d channels found</item> + </plurals> + <!-- Channel description for channel scanning result menu when channels were found "scan again" should match the button in string ut_result_found_choices--> + <string name="ut_result_found_description">If that seems incorrect, try adjusting your antenna and scan again.</string> + <!-- Rescan description for channel scanning result menu when channels were found --> + <!-- Menu items for channel scanning result menu when channels were found --> + <string-array name="ut_result_found_choices"> + <item>Done</item> + <item>Scan again</item> + </string-array> + <!-- Title for channel scanning result menu when no channel was found --> + <string name="ut_result_not_found_title">No Channels found</string> + <!-- Description for channel scanning result menu when no channel was found --> + <string name="bt_result_not_found_description">The scan did not find any channels. Verify + your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust + its placement or direction. For best results, place it high and near a window and scan + again.</string> + <!-- Description for channel scanning result menu when no channel was found with USB tuners--> + <string name="ut_result_not_found_description">The scan did not find any channels. Verify the + USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air + antenna, adjust its placement or direction. For best results, place it high and near a + window and scan again.</string> + <!-- Description for channel scanning result menu when no channel was found with network + tuners --> + <string name="nt_result_not_found_description">The scan did not find any channels. Verify the + network tuner is powered on and connected to a TV signal source.\n\nIf using an over-the-air + antenna, adjust its placement or direction. For best results, place it high and near a + window and scan again.</string> + <!-- Menu items for channel scanning result menu when no channel was found --> + <string-array name="ut_result_not_found_choices"> + <item>Scan again</item> + <item>Done</item> + </string-array> + + <!-- Notification of USB channel tuner setup strings. --> + <!-- Name of notification channel which is for tuner setup. "USB Tuner" is a TV Tuner that is connected via a USB connection.--> + <string name="ut_setup_notification_channel_name" >USB Tuner setup</string> + <!-- Content title of the notification to launch the setup application of + USB tuner TV input for scanning channels. --> + <string name="ut_setup_notification_content_title">Scan for TV channels</string> + <!-- Content text and info of the notification to launch the setup application of + built-in tuner TV input for scanning channels. --> + <string name="bt_setup_notification_content_text">TV Tuner setup</string> + <!-- Content text and info of the notification to launch the setup application of + USB tuner TV input for scanning channels. --> + <string name="ut_setup_notification_content_text">USB TV Tuner setup</string> + <!-- Content text and info of the notification to launch the setup application of + network tuner TV input for scanning channels. --> + <string name="nt_setup_notification_content_text">Network TV Tuner setup</string> + + <!-- Message when USB tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> + <string name="msg_usb_tuner_disconnected">USB TV tuner disconnected.</string> + <!-- Message when Network tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> + <string name="msg_network_tuner_disconnected">Network tuner disconnected.</string> + + <!-- Title of postal/zip code input guided step fragment [CHAR LIMIT=30] --> + <string name="postal_code_guidance_title">Enter your ZIP Code.</string> + <!-- Description of postal/zip code input guided step fragment [CHAR LIMIT=NONE] --> + <string name="postal_code_guidance_description">Live TV app will use the ZIP Code to provide a complete program guide for the TV channels.</string> + <!-- Description of postal/zip code input edit text view to prompt users entering ZIP Code [CHAR LIMIT=30] --> + <string name="postal_code_action_description">Enter your ZIP Code</string> + <!-- Warning message shown in description field of postal/zip code input edit text view when user enters an invalid ZIP Code and presses Done [CHAR LIMIT=30] --> + <string name="postal_code_invalid_warning">Invalid ZIP Code</string> + +</resources> |