diff options
Diffstat (limited to 'usbtuner-res/values/strings.xml')
-rw-r--r-- | usbtuner-res/values/strings.xml | 72 |
1 files changed, 45 insertions, 27 deletions
diff --git a/usbtuner-res/values/strings.xml b/usbtuner-res/values/strings.xml index e3a8586d..dd393c3e 100644 --- a/usbtuner-res/values/strings.xml +++ b/usbtuner-res/values/strings.xml @@ -18,26 +18,15 @@ <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> <!-- Name of this application. It appears in TV app UI, as one of available TV inputs. --> <string name="bt_app_name">TV Tuner</string> - <!-- Name of this application when one uses USB tuner. It appears in TV app UI, as one of + <!-- Name of this application when one uses USB tuners. It appears in TV app UI, as one of available TV inputs. --> <string name="ut_app_name">USB TV Tuner</string> - <!-- Title for an action which turns a feature on [CHAR LIMIT=30] --> - <string name="ut_setup_on">On</string> - <!-- Title for an action which turns a feature off [CHAR LIMIT=30] --> - <string name="ut_setup_off">Off</string> + <!-- Name of this application when one uses network tuners. It appears in TV app UI, as one of + available TV inputs. --> + <string name="nt_app_name">Network TV Tuner (BETA)</string> <!-- Message shown when the scanning process is being canceled by a user and the scanning process needs the time to wait to finish the processing --> <string name="ut_setup_cancel">Please wait to finish processing</string> - <!-- Message that asks a user to select the type of signal to be used for input among - the choices like terrestrial, cable, or satellite --> - <string name="ut_select_channel_map">Select your channel source</string> - <!-- Message that indicates TV input signal is lost due to physical disconnection or bad - reception --> - <string name="ut_no_signal">No Signal</string> - <!-- Message that says TV failed to change to a channel (or tune) --> - <string name="ut_fail_to_tune">Failed to tune to <xliff:g id="channel_name">%s</xliff:g></string> - <!-- Message that says TV failed to change(or tune) to a channel which has no title --> - <string name="ut_fail_to_tune_to_unknown_channel">Failed to tune</string> <!-- Message shown when the scanned channels became invalid due to incompatible changes found across application versions, hence a user is required to rescan the channels --> <string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the @@ -45,12 +34,16 @@ <!-- Message that says audio of the current channel is not available due to surround sound of TV device disabled --> <string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string> + <!-- Message that says audio of the current channel is not available due to AC3 passthrough is not usable --> + <string name="audio_passthrough_not_supported">Cannot play audio. Please try another TV</string> <!-- Usb Tuner setup common UI breadcrumb --> <string name="ut_setup_breadcrumb">Channel tuner setup</string> <!-- Title for TV Tuner main setup menu when no channel exists --> <string name="bt_setup_new_title">TV Tuner setup</string> <!-- Title for USB tuner main setup menu when no channel exists --> <string name="ut_setup_new_title">USB channel tuner setup</string> + <!-- Title for network tuner main setup menu when no channel exists --> + <string name="nt_setup_new_title">Network tuner setup</string> <!-- Description for TV tuner main setup menu when no channel exists --> <string name="bt_setup_new_description">Verify your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or @@ -61,6 +54,11 @@ to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or direction to receive the most channels. For best results, place it high and near a window.</string> + <!-- Description for network tuner main setup menu when no channel exists --> + <string name="nt_setup_new_description">Verify the network tuner is powered on and connected + to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its + placement or direction to receive the most channels. For best results, + place it high and near a window.</string> <!-- Menu items for USB tuner main setup menu when no channel exists --> <string-array name="ut_setup_new_choices"> <!-- Continue setup --> @@ -82,6 +80,12 @@ to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or direction to receive the most channels. For best results, place it high and near a window.</string> + <!-- Description for network tuner main setup menu when channel exists already --> + <string name="nt_setup_again_description">This will remove the channels found from the network + tuner and scan for new channels again.\n\nVerify the network tuner is powered on and + connected to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust + its placement or direction to receive the most channels. For best results, place it high and + near a window.</string> <!-- Menu items for USB tuner main setup menu when channel exists already --> <string-array name="ut_setup_again_choices"> <!-- Continue setup --> @@ -109,6 +113,8 @@ <string name="bt_channel_scan">TV tuner setup</string> <!-- Title for channel scanning menu. Use this title with USB tuners --> <string name="ut_channel_scan">USB channel tuner setup</string> + <!-- Title for channel scanning menu. Use this title with network tuners --> + <string name="nt_channel_scan">Network channel tuner setup</string> <!-- Message that says channel is not yet scanned during channel scanning process --> <string name="ut_channel_scan_time">This may take several minutes</string> <!-- Message that says Tuner is not available --> @@ -145,29 +151,41 @@ your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust its placement or direction. For best results, place it high and near a window and scan again.</string> - <!-- Description for channel scanning result menu when no channel was found --> + <!-- Description for channel scanning result menu when no channel was found with USB tuners--> <string name="ut_result_not_found_description">The scan did not find any channels. Verify the USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust its placement or direction. For best results, place it high and near a window and scan again.</string> + <!-- Description for channel scanning result menu when no channel was found with network + tuners --> + <string name="nt_result_not_found_description">The scan did not find any channels. Verify the + network tuner is powered on and connected to a TV signal source.\n\nIf using an over-the-air + antenna, adjust its placement or direction. For best results, place it high and near a + window and scan again.</string> <!-- Menu items for channel scanning result menu when no channel was found --> <string-array name="ut_result_not_found_choices"> <item>Scan again</item> <item>Done</item> </string-array> - <!-- Recommendation card of USB channel tuner setup strings. --> - <!-- Content title of the recommendation card to launch the setup application of - USB tuner TV input for scanning channels. This text is shown only when the card is - focused. --> - <string name="ut_setup_recommendation_card_focused_title">Scan for TV channels</string> - <!-- Content text and info of the recommendation card to launch the setup application of + <!-- Notification of USB channel tuner setup strings. --> + <!-- Name of notification channel which is for tuner setup. --> + <string name="ut_setup_notification_channel_name" translatable="false">USB tuner set up</string> + <!-- Content title of the notification to launch the setup application of + USB tuner TV input for scanning channels. --> + <string name="ut_setup_notification_content_title">Scan for TV channels</string> + <!-- Content text and info of the notification to launch the setup application of built-in tuner TV input for scanning channels. --> - <string name="bt_setup_recommendation_card_title">TV Tuner setup</string> - <!-- Content text and info of the recommendation card to launch the setup application of + <string name="bt_setup_notification_content_text">TV Tuner setup</string> + <!-- Content text and info of the notification to launch the setup application of USB tuner TV input for scanning channels. --> - <string name="ut_setup_recommendation_card_title">USB TV Tuner setup</string> + <string name="ut_setup_notification_content_text">USB TV Tuner setup</string> + <!-- Content text and info of the notification to launch the setup application of + network tuner TV input for scanning channels. --> + <string name="nt_setup_notification_content_text">Network TV Tuner setup</string> - <!-- Message when usb tuner device is unplugged. [CHAR LIMIT=NONE] --> - <string name="msg_usb_device_detached">USB TV tuner disconnected.</string> + <!-- Message when USB tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> + <string name="msg_usb_tuner_disconnected">USB TV tuner disconnected.</string> + <!-- Message when Network tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> + <string name="msg_network_tuner_disconnected">Network tuner disconnected.</string> </resources> |