diff options
Diffstat (limited to 'share/cmake-3.10/Help/command/find_package.rst')
| -rw-r--r-- | share/cmake-3.10/Help/command/find_package.rst | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/share/cmake-3.10/Help/command/find_package.rst b/share/cmake-3.10/Help/command/find_package.rst new file mode 100644 index 0000000..83f4716 --- /dev/null +++ b/share/cmake-3.10/Help/command/find_package.rst @@ -0,0 +1,360 @@ +find_package +------------ + +Load settings for an external project. + +:: + + find_package(<package> [version] [EXACT] [QUIET] [MODULE] + [REQUIRED] [[COMPONENTS] [components...]] + [OPTIONAL_COMPONENTS components...] + [NO_POLICY_SCOPE]) + +Finds and loads settings from an external project. ``<package>_FOUND`` +will be set to indicate whether the package was found. When the +package is found package-specific information is provided through +variables and :ref:`Imported Targets` documented by the package itself. The +``QUIET`` option disables messages if the package cannot be found. The +``MODULE`` option disables the second signature documented below. The +``REQUIRED`` option stops processing with an error message if the package +cannot be found. + +A package-specific list of required components may be listed after the +``COMPONENTS`` option (or after the ``REQUIRED`` option if present). +Additional optional components may be listed after +``OPTIONAL_COMPONENTS``. Available components and their influence on +whether a package is considered to be found are defined by the target +package. + +The ``[version]`` argument requests a version with which the package found +should be compatible (format is ``major[.minor[.patch[.tweak]]]``). The +``EXACT`` option requests that the version be matched exactly. If no +``[version]`` and/or component list is given to a recursive invocation +inside a find-module, the corresponding arguments are forwarded +automatically from the outer call (including the ``EXACT`` flag for +``[version]``). Version support is currently provided only on a +package-by-package basis (details below). + +User code should generally look for packages using the above simple +signature. The remainder of this command documentation specifies the +full command signature and details of the search process. Project +maintainers wishing to provide a package to be found by this command +are encouraged to read on. + +The command has two modes by which it searches for packages: "Module" +mode and "Config" mode. Module mode is available when the command is +invoked with the above reduced signature. CMake searches for a file +called ``Find<package>.cmake`` in the :variable:`CMAKE_MODULE_PATH` +followed by the CMake installation. If the file is found, it is read +and processed by CMake. It is responsible for finding the package, +checking the version, and producing any needed messages. Many +find-modules provide limited or no support for versioning; check +the module documentation. If no module is found and the ``MODULE`` +option is not given the command proceeds to Config mode. + +The complete Config mode command signature is:: + + find_package(<package> [version] [EXACT] [QUIET] + [REQUIRED] [[COMPONENTS] [components...]] + [CONFIG|NO_MODULE] + [NO_POLICY_SCOPE] + [NAMES name1 [name2 ...]] + [CONFIGS config1 [config2 ...]] + [HINTS path1 [path2 ... ]] + [PATHS path1 [path2 ... ]] + [PATH_SUFFIXES suffix1 [suffix2 ...]] + [NO_DEFAULT_PATH] + [NO_CMAKE_PATH] + [NO_CMAKE_ENVIRONMENT_PATH] + [NO_SYSTEM_ENVIRONMENT_PATH] + [NO_CMAKE_PACKAGE_REGISTRY] + [NO_CMAKE_BUILDS_PATH] # Deprecated; does nothing. + [NO_CMAKE_SYSTEM_PATH] + [NO_CMAKE_SYSTEM_PACKAGE_REGISTRY] + [CMAKE_FIND_ROOT_PATH_BOTH | + ONLY_CMAKE_FIND_ROOT_PATH | + NO_CMAKE_FIND_ROOT_PATH]) + +The ``CONFIG`` option may be used to skip Module mode explicitly and +switch to Config mode. It is synonymous to using ``NO_MODULE``. Config +mode is also implied by use of options not specified in the reduced +signature. + +Config mode attempts to locate a configuration file provided by the +package to be found. A cache entry called ``<package>_DIR`` is created to +hold the directory containing the file. By default the command +searches for a package with the name ``<package>``. If the ``NAMES`` option +is given the names following it are used instead of ``<package>``. The +command searches for a file called ``<name>Config.cmake`` or +``<lower-case-name>-config.cmake`` for each name specified. A +replacement set of possible configuration file names may be given +using the ``CONFIGS`` option. The search procedure is specified below. +Once found, the configuration file is read and processed by CMake. +Since the file is provided by the package it already knows the +location of package contents. The full path to the configuration file +is stored in the cmake variable ``<package>_CONFIG``. + +All configuration files which have been considered by CMake while +searching for an installation of the package with an appropriate +version are stored in the cmake variable ``<package>_CONSIDERED_CONFIGS``, +the associated versions in ``<package>_CONSIDERED_VERSIONS``. + +If the package configuration file cannot be found CMake will generate +an error describing the problem unless the ``QUIET`` argument is +specified. If ``REQUIRED`` is specified and the package is not found a +fatal error is generated and the configure step stops executing. If +``<package>_DIR`` has been set to a directory not containing a +configuration file CMake will ignore it and search from scratch. + +When the ``[version]`` argument is given Config mode will only find a +version of the package that claims compatibility with the requested +version (format is ``major[.minor[.patch[.tweak]]]``). If the ``EXACT`` +option is given only a version of the package claiming an exact match +of the requested version may be found. CMake does not establish any +convention for the meaning of version numbers. Package version +numbers are checked by "version" files provided by the packages +themselves. For a candidate package configuration file +``<config-file>.cmake`` the corresponding version file is located next +to it and named either ``<config-file>-version.cmake`` or +``<config-file>Version.cmake``. If no such version file is available +then the configuration file is assumed to not be compatible with any +requested version. A basic version file containing generic version +matching code can be created using the +:module:`CMakePackageConfigHelpers` module. When a version file +is found it is loaded to check the requested version number. The +version file is loaded in a nested scope in which the following +variables have been defined: + +``PACKAGE_FIND_NAME`` + the ``<package>`` name +``PACKAGE_FIND_VERSION`` + full requested version string +``PACKAGE_FIND_VERSION_MAJOR`` + major version if requested, else 0 +``PACKAGE_FIND_VERSION_MINOR`` + minor version if requested, else 0 +``PACKAGE_FIND_VERSION_PATCH`` + patch version if requested, else 0 +``PACKAGE_FIND_VERSION_TWEAK`` + tweak version if requested, else 0 +``PACKAGE_FIND_VERSION_COUNT`` + number of version components, 0 to 4 + +The version file checks whether it satisfies the requested version and +sets these variables: + +``PACKAGE_VERSION`` + full provided version string +``PACKAGE_VERSION_EXACT`` + true if version is exact match +``PACKAGE_VERSION_COMPATIBLE`` + true if version is compatible +``PACKAGE_VERSION_UNSUITABLE`` + true if unsuitable as any version + +These variables are checked by the ``find_package`` command to determine +whether the configuration file provides an acceptable version. They +are not available after the find_package call returns. If the version +is acceptable the following variables are set: + +``<package>_VERSION`` + full provided version string +``<package>_VERSION_MAJOR`` + major version if provided, else 0 +``<package>_VERSION_MINOR`` + minor version if provided, else 0 +``<package>_VERSION_PATCH`` + patch version if provided, else 0 +``<package>_VERSION_TWEAK`` + tweak version if provided, else 0 +``<package>_VERSION_COUNT`` + number of version components, 0 to 4 + +and the corresponding package configuration file is loaded. +When multiple package configuration files are available whose version files +claim compatibility with the version requested it is unspecified which +one is chosen: unless the variable :variable:`CMAKE_FIND_PACKAGE_SORT_ORDER` +is set no attempt is made to choose a highest or closest version number. + +To control the order in which ``find_package`` checks for compatibiliy use +the two variables :variable:`CMAKE_FIND_PACKAGE_SORT_ORDER` and +:variable:`CMAKE_FIND_PACKAGE_SORT_DIRECTION`. +For instance in order to select the highest version one can set:: + + SET(CMAKE_FIND_PACKAGE_SORT_ORDER NATURAL) + SET(CMAKE_FIND_PACKAGE_SORT_DIRECTION DEC) + +before calling ``find_package``. + +Config mode provides an elaborate interface and search procedure. +Much of the interface is provided for completeness and for use +internally by find-modules loaded by Module mode. Most user code +should simply call:: + + find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET]) + +in order to find a package. Package maintainers providing CMake +package configuration files are encouraged to name and install them +such that the procedure outlined below will find them without +requiring use of additional options. + +CMake constructs a set of possible installation prefixes for the +package. Under each prefix several directories are searched for a +configuration file. The tables below show the directories searched. +Each entry is meant for installation trees following Windows (W), UNIX +(U), or Apple (A) conventions:: + + <prefix>/ (W) + <prefix>/(cmake|CMake)/ (W) + <prefix>/<name>*/ (W) + <prefix>/<name>*/(cmake|CMake)/ (W) + <prefix>/(lib/<arch>|lib|share)/cmake/<name>*/ (U) + <prefix>/(lib/<arch>|lib|share)/<name>*/ (U) + <prefix>/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/ (U) + <prefix>/<name>*/(lib/<arch>|lib|share)/cmake/<name>*/ (W/U) + <prefix>/<name>*/(lib/<arch>|lib|share)/<name>*/ (W/U) + <prefix>/<name>*/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/ (W/U) + +On systems supporting OS X Frameworks and Application Bundles the +following directories are searched for frameworks or bundles +containing a configuration file:: + + <prefix>/<name>.framework/Resources/ (A) + <prefix>/<name>.framework/Resources/CMake/ (A) + <prefix>/<name>.framework/Versions/*/Resources/ (A) + <prefix>/<name>.framework/Versions/*/Resources/CMake/ (A) + <prefix>/<name>.app/Contents/Resources/ (A) + <prefix>/<name>.app/Contents/Resources/CMake/ (A) + +In all cases the ``<name>`` is treated as case-insensitive and corresponds +to any of the names specified (``<package>`` or names given by ``NAMES``). +Paths with ``lib/<arch>`` are enabled if the +:variable:`CMAKE_LIBRARY_ARCHITECTURE` variable is set. If ``PATH_SUFFIXES`` +is specified the suffixes are appended to each (W) or (U) directory entry +one-by-one. + +This set of directories is intended to work in cooperation with +projects that provide configuration files in their installation trees. +Directories above marked with (W) are intended for installations on +Windows where the prefix may point at the top of an application's +installation directory. Those marked with (U) are intended for +installations on UNIX platforms where the prefix is shared by multiple +packages. This is merely a convention, so all (W) and (U) directories +are still searched on all platforms. Directories marked with (A) are +intended for installations on Apple platforms. The +:variable:`CMAKE_FIND_FRAMEWORK` and :variable:`CMAKE_FIND_APPBUNDLE` +variables determine the order of preference. + +The set of installation prefixes is constructed using the following +steps. If ``NO_DEFAULT_PATH`` is specified all ``NO_*`` options are +enabled. + +1. Search paths specified in cmake-specific cache variables. These + are intended to be used on the command line with a ``-DVAR=value``. + The values are interpreted as :ref:`;-lists <CMake Language Lists>`. + This can be skipped if ``NO_CMAKE_PATH`` is passed:: + + CMAKE_PREFIX_PATH + CMAKE_FRAMEWORK_PATH + CMAKE_APPBUNDLE_PATH + +2. Search paths specified in cmake-specific environment variables. + These are intended to be set in the user's shell configuration, + and therefore use the host's native path separator + (``;`` on Windows and ``:`` on UNIX). + This can be skipped if ``NO_CMAKE_ENVIRONMENT_PATH`` is passed:: + + <package>_DIR + CMAKE_PREFIX_PATH + CMAKE_FRAMEWORK_PATH + CMAKE_APPBUNDLE_PATH + +3. Search paths specified by the ``HINTS`` option. These should be paths + computed by system introspection, such as a hint provided by the + location of another item already found. Hard-coded guesses should + be specified with the ``PATHS`` option. + +4. Search the standard system environment variables. This can be + skipped if ``NO_SYSTEM_ENVIRONMENT_PATH`` is passed. Path entries + ending in ``/bin`` or ``/sbin`` are automatically converted to their + parent directories:: + + PATH + +5. Search paths stored in the CMake :ref:`User Package Registry`. + This can be skipped if ``NO_CMAKE_PACKAGE_REGISTRY`` is passed or by + setting the :variable:`CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY` + to ``TRUE``. + See the :manual:`cmake-packages(7)` manual for details on the user + package registry. + +6. Search cmake variables defined in the Platform files for the + current system. This can be skipped if ``NO_CMAKE_SYSTEM_PATH`` is + passed:: + + CMAKE_SYSTEM_PREFIX_PATH + CMAKE_SYSTEM_FRAMEWORK_PATH + CMAKE_SYSTEM_APPBUNDLE_PATH + +7. Search paths stored in the CMake :ref:`System Package Registry`. + This can be skipped if ``NO_CMAKE_SYSTEM_PACKAGE_REGISTRY`` is passed + or by setting the + :variable:`CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY` to ``TRUE``. + See the :manual:`cmake-packages(7)` manual for details on the system + package registry. + +8. Search paths specified by the ``PATHS`` option. These are typically + hard-coded guesses. + +.. |FIND_XXX| replace:: find_package +.. |FIND_ARGS_XXX| replace:: <package> +.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace:: + :variable:`CMAKE_FIND_ROOT_PATH_MODE_PACKAGE` + +.. include:: FIND_XXX_ROOT.txt +.. include:: FIND_XXX_ORDER.txt + +Every non-REQUIRED ``find_package`` call can be disabled by setting the +:variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to ``TRUE``. + +When loading a find module or package configuration file ``find_package`` +defines variables to provide information about the call arguments (and +restores their original state before returning): + +``CMAKE_FIND_PACKAGE_NAME`` + the ``<package>`` name which is searched for +``<package>_FIND_REQUIRED`` + true if ``REQUIRED`` option was given +``<package>_FIND_QUIETLY`` + true if ``QUIET`` option was given +``<package>_FIND_VERSION`` + full requested version string +``<package>_FIND_VERSION_MAJOR`` + major version if requested, else 0 +``<package>_FIND_VERSION_MINOR`` + minor version if requested, else 0 +``<package>_FIND_VERSION_PATCH`` + patch version if requested, else 0 +``<package>_FIND_VERSION_TWEAK`` + tweak version if requested, else 0 +``<package>_FIND_VERSION_COUNT`` + number of version components, 0 to 4 +``<package>_FIND_VERSION_EXACT`` + true if ``EXACT`` option was given +``<package>_FIND_COMPONENTS`` + list of requested components +``<package>_FIND_REQUIRED_<c>`` + true if component ``<c>`` is required, + false if component ``<c>`` is optional + +In Module mode the loaded find module is responsible to honor the +request detailed by these variables; see the find module for details. +In Config mode ``find_package`` handles ``REQUIRED``, ``QUIET``, and +``[version]`` options automatically but leaves it to the package +configuration file to handle components in a way that makes sense +for the package. The package configuration file may set +``<package>_FOUND`` to false to tell ``find_package`` that component +requirements are not satisfied. + +See the :command:`cmake_policy` command documentation for discussion +of the ``NO_POLICY_SCOPE`` option. |