diff options
Diffstat (limited to 'share/cmake-3.2/Modules/CPackRPM.cmake')
-rw-r--r-- | share/cmake-3.2/Modules/CPackRPM.cmake | 1323 |
1 files changed, 1323 insertions, 0 deletions
diff --git a/share/cmake-3.2/Modules/CPackRPM.cmake b/share/cmake-3.2/Modules/CPackRPM.cmake new file mode 100644 index 0000000..e3f74d8 --- /dev/null +++ b/share/cmake-3.2/Modules/CPackRPM.cmake @@ -0,0 +1,1323 @@ +#.rst: +# CPackRPM +# -------- +# +# The builtin (binary) CPack RPM generator (Unix only) +# +# Variables specific to CPack RPM generator +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# CPackRPM may be used to create RPM package using CPack. CPackRPM is a +# CPack generator thus it uses the CPACK_XXX variables used by CPack : +# http://www.cmake.org/Wiki/CMake:CPackConfiguration +# +# However CPackRPM has specific features which are controlled by the +# specifics CPACK_RPM_XXX variables. CPackRPM is a component aware +# generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more +# CPACK_RPM_<ComponentName>_XXXX variables may be used in order to have +# component specific values. Note however that <componentName> refers +# to the **grouping name**. This may be either a component name or a +# component GROUP name. Usually those vars correspond to RPM spec file +# entities, one may find information about spec files here +# http://www.rpm.org/wiki/Docs. You'll find a detailed usage of +# CPackRPM on the wiki: +# +# :: +# +# http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 +# +# However as a handy reminder here comes the list of specific variables: +# +# .. variable:: CPACK_RPM_PACKAGE_SUMMARY +# CPACK_RPM_<component>_PACKAGE_SUMMARY +# +# The RPM package summary. +# +# * Mandatory : YES +# * Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY +# +# .. variable:: CPACK_RPM_PACKAGE_NAME +# +# The RPM package name. +# +# * Mandatory : YES +# * Default : CPACK_PACKAGE_NAME +# +# .. variable:: CPACK_RPM_PACKAGE_VERSION +# +# The RPM package version. +# +# * Mandatory : YES +# * Default : CPACK_PACKAGE_VERSION +# +# .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE +# +# The RPM package architecture. +# +# * Mandatory : NO +# * Default : - +# +# This may be set to "noarch" if you know you are building a noarch package. +# +# .. variable:: CPACK_RPM_PACKAGE_RELEASE +# +# The RPM package release. +# +# * Mandatory : YES +# * Default : 1 +# +# This is the numbering of the RPM package itself, i.e. the version of the +# packaging and not the version of the content (see +# CPACK_RPM_PACKAGE_VERSION). One may change the default value if the +# previous packaging was buggy and/or you want to put here a fancy Linux +# distro specific numbering. +# +# .. variable:: CPACK_RPM_PACKAGE_LICENSE +# +# The RPM package license policy. +# +# * Mandatory : YES +# * Default : "unknown" +# +# .. variable:: CPACK_RPM_PACKAGE_GROUP +# +# The RPM package group. +# +# * Mandatory : YES +# * Default : "unknown" +# +# .. variable:: CPACK_RPM_PACKAGE_VENDOR +# +# The RPM package vendor. +# +# * Mandatory : YES +# * Default : CPACK_PACKAGE_VENDOR if set or "unknown" +# +# .. variable:: CPACK_RPM_PACKAGE_URL +# +# The projects URL. +# +# * Mandatory : NO +# * Default : - +# +# .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION +# CPACK_RPM_<component>_PACKAGE_DESCRIPTION +# +# RPM package description. +# +# * Mandatory : YES +# * Default : CPACK_COMPONENT_<compName>_DESCRIPTION (component based installers +# only) if set, CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package +# description available" +# +# .. variable:: CPACK_RPM_COMPRESSION_TYPE +# +# RPM compression type. +# +# * Mandatory : NO +# * Default : - +# +# May be used to override RPM compression type to be used to build the +# RPM. For example some Linux distribution now default to lzma or xz +# compression whereas older cannot use such RPM. Using this one can enforce +# compression type to be used. Possible value are: lzma, xz, bzip2 and gzip. +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES +# +# RPM spec requires field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM dependencies (requires). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") +# +# The required package list of an RPM file could be printed with:: +# +# rpm -qp --requires file.rpm +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE +# +# RPM spec requires(pre) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM preinstall dependencies (requires(pre)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts") +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST +# +# RPM spec requires(post) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM postinstall dependencies (requires(post)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts") +# +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN +# +# RPM spec requires(postun) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM postuninstall dependencies (requires(postun)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts") +# +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN +# +# RPM spec requires(preun) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM preuninstall dependencies (requires(preun)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts") +# +# .. variable:: CPACK_RPM_PACKAGE_SUGGESTS +# +# RPM spec suggest field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set weak RPM dependencies (suggests). Note that you must +# enclose the complete requires string between quotes. +# +# .. variable:: CPACK_RPM_PACKAGE_PROVIDES +# +# RPM spec provides field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM dependencies (provides). The provided package list +# of an RPM file could be printed with:: +# +# rpm -qp --provides file.rpm +# +# .. variable:: CPACK_RPM_PACKAGE_OBSOLETES +# +# RPM spec obsoletes field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM packages that are obsoleted by this one. +# +# .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE +# +# build a relocatable RPM. +# +# * Mandatory : NO +# * Default : CPACK_PACKAGE_RELOCATABLE +# +# If this variable is set to TRUE or ON CPackRPM will try +# to build a relocatable RPM package. A relocatable RPM may +# be installed using:: +# +# rpm --prefix or --relocate +# +# in order to install it at an alternate place see rpm(8). Note that +# currently this may fail if CPACK_SET_DESTDIR is set to ON. If +# CPACK_SET_DESTDIR is set then you will get a warning message but if there +# is file installed with absolute path you'll get unexpected behavior. +# +# .. variable:: CPACK_RPM_SPEC_INSTALL_POST +# +# * Mandatory : NO +# * Default : - +# * Deprecated: YES +# +# This way of specifying post-install script is deprecated, use +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE. +# May be used to set an RPM post-install command inside the spec file. +# For example setting it to "/bin/true" may be used to prevent +# rpmbuild to strip binaries. +# +# .. variable:: CPACK_RPM_SPEC_MORE_DEFINE +# +# RPM extended spec definitions lines. +# +# * Mandatory : NO +# * Default : - +# +# May be used to add any %define lines to the generated spec file. +# +# .. variable:: CPACK_RPM_PACKAGE_DEBUG +# +# Toggle CPackRPM debug output. +# +# * Mandatory : NO +# * Default : - +# +# May be set when invoking cpack in order to trace debug information +# during CPack RPM run. For example you may launch CPack like this:: +# +# cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM +# +# .. variable:: CPACK_RPM_USER_BINARY_SPECFILE +# +# A user provided spec file. +# +# * Mandatory : NO +# * Default : - +# +# May be set by the user in order to specify a USER binary spec file +# to be used by CPackRPM instead of generating the file. +# The specified file will be processed by configure_file( @ONLY). +# One can provide a component specific file by setting +# CPACK_RPM_<componentName>_USER_BINARY_SPECFILE. +# +# .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE +# +# Spec file template. +# +# * Mandatory : NO +# * Default : - +# +# If set CPack will generate a template for USER specified binary +# spec file and stop with an error. For example launch CPack like this:: +# +# cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM +# +# The user may then use this file in order to hand-craft is own +# binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE. +# +# .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE +# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE +# +# * Mandatory : NO +# * Default : - +# +# May be used to embed a pre (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %pre or %preun section +# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for +# each component can be overridden with +# CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and +# CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE. +# One may verify which scriptlet has been included with:: +# +# rpm -qp --scripts package.rpm +# +# .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE +# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE +# +# * Mandatory : NO +# * Default : - +# +# May be used to embed a post (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %post or %postun section. +# If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for +# each component can be overridden with +# CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and +# CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE. +# One may verify which scriptlet has been included with:: +# +# rpm -qp --scripts package.rpm +# +# .. variable:: CPACK_RPM_USER_FILELIST +# CPACK_RPM_<COMPONENT>_USER_FILELIST +# +# * Mandatory : NO +# * Default : - +# +# May be used to explicitly specify %(<directive>) file line +# in the spec file. Like %config(noreplace) or any other directive +# that be found in the %files section. Since CPackRPM is generating +# the list of files (and directories) the user specified files of +# the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from +# the generated list. +# +# .. variable:: CPACK_RPM_CHANGELOG_FILE +# +# RPM changelog file. +# +# * Mandatory : NO +# * Default : - +# +# May be used to embed a changelog in the spec file. +# The refered file will be read and directly put after the %changelog +# section. +# +# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST +# +# list of path to be excluded. +# +# * Mandatory : NO +# * Default : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include +# +# May be used to exclude path (directories or files) from the auto-generated +# list of paths discovered by CPack RPM. The defaut value contains a +# reasonable set of values if the variable is not defined by the user. If the +# variable is defined by the user then CPackRPM will NOT any of the default +# path. If you want to add some path to the default list then you can use +# CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION variable. +# +# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION +# +# additional list of path to be excluded. +# +# * Mandatory : NO +# * Default : - +# +# May be used to add more exclude path (directories or files) from the initial +# default list of excluded paths. See CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST. +# +# .. variable:: CPACK_RPM_RELOCATION_PATHS +# +# * Mandatory : NO +# * Default : - +# +# May be used to specify more than one relocation path per relocatable RPM. +# Variable contains a list of relocation paths that if relative are prefixed +# by the value of CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX or by the value of +# CPACK_PACKAGING_INSTALL_PREFIX if the component version is not provided. +# Variable is not component based as its content can be used to set a different +# path prefix for e.g. binary dir and documentation dir at the same time. +# Only prefixes that are required by a certain component are added to that +# component - component must contain at least one file/directory/symbolic link +# with CPACK_RPM_RELOCATION_PATHS prefix for a certain relocation path +# to be added. Package will not contain any relocation paths if there are no +# files/directories/symbolic links on any of the provided prefix locations. +# Packages that either do not contain any relocation paths or contain +# files/directories/symbolic links that are outside relocation paths print +# out an AUTHOR_WARNING that RPM will be partially relocatable. +# +# .. variable:: CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX +# +# * Mandatory : NO +# * Default : CPACK_PACKAGING_INSTALL_PREFIX +# +# May be used to set per component CPACK_PACKAGING_INSTALL_PREFIX for +# relocatable RPM packages. + +#============================================================================= +# Copyright 2007-2009 Kitware, Inc. +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +# Author: Eric Noulard with the help of Alexander Neundorf. + +function(cpack_rpm_prepare_relocation_paths) + # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX) + file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX) + else() + file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX) + endif() + + set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}") + list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS) + + # set base path prefix + if(EXISTS "${WDIR}/${PATH_PREFIX}") + set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PATH_PREFIX}\n") + list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}") + endif() + + # set other path prefixes + foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS}) + if(IS_ABSOLUTE "${RELOCATION_PATH}") + set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}") + else() + set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}") + endif() + + if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}") + set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PREPARED_RELOCATION_PATH}\n") + list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}") + endif() + endforeach() + + # warn about all the paths that are not relocatable + cmake_policy(PUSH) + # Tell file(GLOB_RECURSE) not to follow directory symlinks + # even if the project does not set this policy to NEW. + cmake_policy(SET CMP0009 NEW) + file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*") + cmake_policy(POP) + foreach(TMP_PATH ${FILE_PATHS_}) + string(LENGTH "${WDIR}" WDIR_LEN) + string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH) + unset(TMP_PATH_FOUND_) + + foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES}) + file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}") + string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_) + + if(NOT "${PREFIX_}" STREQUAL "..") + set(TPM_PATH_FOUND_ TRUE) + break() + endif() + endforeach() + + if(NOT TPM_PATH_FOUND_) + message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.") + endif() + endforeach() + + set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE) + set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE) +endfunction() + +if(CMAKE_BINARY_DIR) + message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.") +endif() + +if(NOT UNIX) + message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") +endif() + +# rpmbuild is the basic command for building RPM package +# it may be a simple (symbolic) link to rpm command. +find_program(RPMBUILD_EXECUTABLE rpmbuild) + +# Check version of the rpmbuild tool this would be easier to +# track bugs with users and CPackRPM debug mode. +# We may use RPM version in order to check for available version dependent features +if(RPMBUILD_EXECUTABLE) + execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version + OUTPUT_VARIABLE _TMP_VERSION + ERROR_QUIET + OUTPUT_STRIP_TRAILING_WHITESPACE) + string(REGEX REPLACE "^.* " "" + RPMBUILD_EXECUTABLE_VERSION + ${_TMP_VERSION}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") + endif() +endif() + +if(NOT RPMBUILD_EXECUTABLE) + message(FATAL_ERROR "RPM package requires rpmbuild executable") +endif() + +# Display lsb_release output if DEBUG mode enable +# This will help to diagnose problem with CPackRPM +# because we will know on which kind of Linux we are +if(CPACK_RPM_PACKAGE_DEBUG) + find_program(LSB_RELEASE_EXECUTABLE lsb_release) + if(LSB_RELEASE_EXECUTABLE) + execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a + OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT + ERROR_QUIET + OUTPUT_STRIP_TRAILING_WHITESPACE) + string(REGEX REPLACE "\n" ", " + LSB_RELEASE_OUTPUT + ${_TMP_LSB_RELEASE_OUTPUT}) + else () + set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") + endif() + message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") +endif() + +# We may use RPM version in the future in order +# to shut down warning about space in buildtree +# some recent RPM version should support space in different places. +# not checked [yet]. +if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") + message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") +endif() + +# If rpmbuild is found +# we try to discover alien since we may be on non RPM distro like Debian. +# In this case we may try to to use more advanced features +# like generating RPM directly from DEB using alien. +# FIXME feature not finished (yet) +find_program(ALIEN_EXECUTABLE alien) +if(ALIEN_EXECUTABLE) + message(STATUS "alien found, we may be on a Debian based distro.") +endif() + +# Are we packaging components ? +if(CPACK_RPM_PACKAGE_COMPONENT) + set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") + string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) +else() + set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") +endif() + +set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") + +# +# Use user-defined RPM specific variables value +# or generate reasonable default value from +# CPACK_xxx generic values. +# The variables comes from the needed (mandatory or not) +# values found in the RPM specification file aka ".spec" file. +# The variables which may/should be defined are: +# + +# CPACK_RPM_PACKAGE_SUMMARY (mandatory) + +# CPACK_RPM_PACKAGE_SUMMARY_ is used only locally so that it can be unset each time before use otherwise +# component packaging could leak variable content between components +unset(CPACK_RPM_PACKAGE_SUMMARY_) +if(CPACK_RPM_PACKAGE_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY_ ${CPACK_RPM_PACKAGE_SUMMARY}) + unset(CPACK_RPM_PACKAGE_SUMMARY) +endif() + +#Check for component summary first. +#If not set, it will use regular package summary logic. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) + endif() +endif() + +if(NOT CPACK_RPM_PACKAGE_SUMMARY) + if(CPACK_RPM_PACKAGE_SUMMARY_) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) + elseif(CPACK_PACKAGE_DESCRIPTION_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) + else() + # if neither var is defined lets use the name as summary + string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) + endif() +endif() + +# CPACK_RPM_PACKAGE_NAME (mandatory) +if(NOT CPACK_RPM_PACKAGE_NAME) + string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) +endif() + +# CPACK_RPM_PACKAGE_VERSION (mandatory) +if(NOT CPACK_RPM_PACKAGE_VERSION) + if(NOT CPACK_PACKAGE_VERSION) + message(FATAL_ERROR "RPM package requires a package version") + endif() + set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) +endif() +# Replace '-' in version with '_' +# '-' character is an Illegal RPM version character +# it is illegal because it is used to separate +# RPM "Version" from RPM "Release" +string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) + +# CPACK_RPM_PACKAGE_ARCHITECTURE (optional) +if(CPACK_RPM_PACKAGE_ARCHITECTURE) + set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}") + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") + endif() +else() + set(TMP_RPM_BUILDARCH "") +endif() + +# CPACK_RPM_PACKAGE_RELEASE +# The RPM release is the numbering of the RPM package ITSELF +# this is the version of the PACKAGING and NOT the version +# of the CONTENT of the package. +# You may well need to generate a new RPM package release +# without changing the version of the packaged software. +# This is the case when the packaging is buggy (not) the software :=) +# If not set, 1 is a good candidate +if(NOT CPACK_RPM_PACKAGE_RELEASE) + set(CPACK_RPM_PACKAGE_RELEASE 1) +endif() + +# CPACK_RPM_PACKAGE_LICENSE +if(NOT CPACK_RPM_PACKAGE_LICENSE) + set(CPACK_RPM_PACKAGE_LICENSE "unknown") +endif() + +# CPACK_RPM_PACKAGE_GROUP +if(NOT CPACK_RPM_PACKAGE_GROUP) + set(CPACK_RPM_PACKAGE_GROUP "unknown") +endif() + +# CPACK_RPM_PACKAGE_VENDOR +if(NOT CPACK_RPM_PACKAGE_VENDOR) + if(CPACK_PACKAGE_VENDOR) + set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") + else() + set(CPACK_RPM_PACKAGE_VENDOR "unknown") + endif() +endif() + +# CPACK_RPM_PACKAGE_SOURCE +# The name of the source tarball in case we generate a source RPM + +# CPACK_RPM_PACKAGE_DESCRIPTION +# The variable content may be either +# - explicitly given by the user or +# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE +# if it is defined +# - set to a default value +# + +# CPACK_RPM_PACKAGE_DESCRIPTION_ is used only locally so that it can be unset each time before use otherwise +# component packaging could leak variable content between components +unset(CPACK_RPM_PACKAGE_DESCRIPTION_) +if(CPACK_RPM_PACKAGE_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION_ ${CPACK_RPM_PACKAGE_DESCRIPTION}) + unset(CPACK_RPM_PACKAGE_DESCRIPTION) +endif() + +#Check for a component description first. +#If not set, it will use regular package description logic. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) + elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) + endif() +endif() + +if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) + if(CPACK_RPM_PACKAGE_DESCRIPTION_) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) + elseif(CPACK_PACKAGE_DESCRIPTION_FILE) + file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) + else () + set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") + endif () +endif () + +# CPACK_RPM_COMPRESSION_TYPE +# +if (CPACK_RPM_COMPRESSION_TYPE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") + endif() + if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") + set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") + endif() +else() + set(CPACK_RPM_COMPRESSION_TYPE_TMP "") +endif() + +if(CPACK_PACKAGE_RELOCATABLE) + set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) +endif() +if(CPACK_RPM_PACKAGE_RELOCATABLE) + unset(TMP_RPM_PREFIXES) + + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Trying to build a relocatable package") + endif() + if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) + message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") + else() + set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) + cpack_rpm_prepare_relocation_paths() + endif() +endif() + +# Check if additional fields for RPM spec header are given +# There may be some COMPONENT specific variables as well +# If component specific var is not provided we use the global one +# for each component +foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") + endif() + if(CPACK_RPM_PACKAGE_COMPONENT) + if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) + else() + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + endif() + else() + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + endif() + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + endif() + + # Do not forget to unset previously set header (from previous component) + unset(TMP_RPM_${_RPM_SPEC_HEADER}) + # Treat the RPM Spec keyword iff it has been properly defined + if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + # Transform NAME --> Name e.g. PROVIDES --> Provides + # The Upper-case first letter and lowercase tail is the + # appropriate value required in the final RPM spec file. + string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) + string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) + string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) + set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") + # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. + set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) + list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) + if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) + string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") + set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") + endif() + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + endif() + set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") + unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) + endif() +endforeach() + +# CPACK_RPM_SPEC_INSTALL_POST +# May be used to define a RPM post intallation script +# for example setting it to "/bin/true" may prevent +# rpmbuild from stripping binaries. +if(CPACK_RPM_SPEC_INSTALL_POST) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") + endif() + set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") +endif() + +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE) +# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE) +# May be used to embed a post (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %post or %postun section +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) + endif() + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) + endif() +else() + set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) + set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) +endif() + +# Handle post-install file if it has been specified +if(CPACK_RPM_POST_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") + endif() +else() + # reset SPEC var value if no post install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTINSTALL "") +endif() + +# Handle post-uninstall file if it has been specified +if(CPACK_RPM_POST_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif() +else() + # reset SPEC var value if no post uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTUNINSTALL "") +endif() + +# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE) +# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE) +# May be used to embed a pre (un)installation script in the spec file. +# The refered script file(s) will be read and directly +# put after the %pre or %preun section +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) + endif() + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE}) + else() + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) + endif() +else() + set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) + set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) +endif() + +# Handle pre-install file if it has been specified +if(CPACK_RPM_PRE_INSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") + endif() +else() + # reset SPEC var value if no pre-install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREINSTALL "") +endif() + +# Handle pre-uninstall file if it has been specified +if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) + file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) + else() + message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") + endif() +else() + # reset SPEC var value if no pre-uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREUNINSTALL "") +endif() + +# CPACK_RPM_CHANGELOG_FILE +# May be used to embed a changelog in the spec file. +# The refered file will be read and directly put after the %changelog section +if(CPACK_RPM_CHANGELOG_FILE) + if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) + file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) + else() + message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") + endif() +else() + set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard <eric.noulard@gmail.com> - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") +endif() + +# CPACK_RPM_SPEC_MORE_DEFINE +# This is a generated spec rpm file spaceholder +if(CPACK_RPM_SPEC_MORE_DEFINE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") + endif() +endif() + +# Now we may create the RPM build tree structure +set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") +message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") +# Prepare RPM build tree +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) +file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) + +#set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") +set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") +# it seems rpmbuild can't handle spaces in the path +# neither escaping (as below) nor putting quotes around the path seem to help +#string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") +set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") + +# if we are creating a relocatable package, omit parent directories of +# CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" +# which is passed to the find command that generates the content-list +if(CPACK_RPM_PACKAGE_RELOCATABLE) + # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are + # destinct parent paths of other relocation paths and remove the + # final element (so the install-prefix dir itself is not omitted + # from the RPM's content-list) + list(SORT RPM_USED_PACKAGE_PREFIXES) + set(_DISTINCT_PATH "NOT_SET") + foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) + if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") + set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") + + string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}") + list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) + unset(_TMP_LIST) + # Now generate all of the parent dirs of the relocation path + foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) + list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") + string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") + list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND) + if(_DUPLICATE_FOUND EQUAL -1) + set(_OMIT_DIR "-o -path ${_OMIT_DIR}") + separate_arguments(_OMIT_DIR) + list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) + endif() + endforeach() + endif() + endforeach() +endif() + +if (CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") +endif() + +if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) + set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) + if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) + message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") + list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") + endif() +endif() + +if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) + if (CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") + endif() + foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) + list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}") + endforeach() +endif() +if (CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") +endif() + +# Use files tree to construct files command (spec file) +# We should not forget to include symlinks (thus -o -type l) +# We should include directory as well (thus -type d) +# but not the main local dir "." (thus -a -not -name ".") +# We must remove the './' due to the local search and escape the +# file name by enclosing it between double quotes (thus the sed) +# Then we must authorize any man pages extension (adding * at the end) +# because rpmbuild may automatically compress those files +execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) ) + COMMAND sed s:.*/man.*/.*:&*: + COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/ + WORKING_DIRECTORY "${WDIR}" + OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES) + +# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT> +# into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL +# otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES +# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}") + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif() + endif() +else() + if(CPACK_ABSOLUTE_DESTINATION_FILES) + set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") + endif() +endif() + +# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST}) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") + endif() + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() +else() + if(CPACK_RPM_USER_FILELIST) + set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") + else() + set(CPACK_RPM_USER_FILELIST_INTERNAL "") + endif() +endif() + +# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL +# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL +# or CPACK_RPM_INSTALL_FILES, +# hence it must be done before these auto-generated lists are processed. +if(CPACK_RPM_USER_FILELIST_INTERNAL) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") + endif() + + # Create CMake list from CPACK_RPM_INSTALL_FILES + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") + + set(CPACK_RPM_USER_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) + string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F}) + string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F}) + + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") + endif() + if(F_PREFIX) + set(F_PREFIX "${F_PREFIX} ") + endif() + # Rebuild the user list file + set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n") + + # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) + # ABSOLUTE destination files list may not exists at all + if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) + endif() + + endforeach() + + # Rebuild CPACK_RPM_INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach() +else() + set(CPACK_RPM_USER_INSTALL_FILES "") +endif() + +if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") + endif() + # Remove trailing space + string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) + # Transform endline separated - string into CMake List + string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove unecessary quotes + string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") + # Remove ABSOLUTE install file from INSTALL FILE LIST + list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) + # Rebuild INSTALL_FILES + set(CPACK_RPM_INSTALL_FILES "") + foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endforeach() + # Build ABSOLUTE_INSTALL_FILES + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") + foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n") + endforeach() + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") + message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") + endif() +else() + # reset vars in order to avoid leakage of value(s) from one component to another + set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") +endif() + +# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir +# This is necessary to avoid duplicate files since rpmbuild do +# recursion on its own when encountering a pathname which is a directory +# which is not flagged as %dir +string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) +string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") +string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST + "${CPACK_RPM_INSTALL_FILES_LIST}") +set(CPACK_RPM_INSTALL_FILES "") +foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) + if(IS_DIRECTORY "${WDIR}/${F}") + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n") + else() + set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n") + endif() +endforeach() +set(CPACK_RPM_INSTALL_FILES_LIST "") + +# The name of the final spec file to be used by rpmbuild +set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec") + +# Print out some debug information if we were asked for that +if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") + message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") + message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") + message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") + message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") + message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") + message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") + message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") + message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") +endif() + +# protect @ in pathname in order to avoid their +# interpretation during the configure_file step +set(CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES}") +set(PROTECTED_AT "@") +string(REPLACE "@" "\@PROTECTED_AT\@" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES_LIST}") +set(CPACK_RPM_INSTALL_FILES_LIST "") + +# +# USER generated/provided spec file handling. +# + +# We can have a component specific spec file. +if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE) + set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE}) +endif() + +# We should generate a USER spec file template: +# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE +# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE +if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in + "# -*- rpm-spec -*- +BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ +Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ +Name: \@CPACK_RPM_PACKAGE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_NAME\@ +Version: \@CPACK_RPM_PACKAGE_VERSION\@ +Release: \@CPACK_RPM_PACKAGE_RELEASE\@ +License: \@CPACK_RPM_PACKAGE_LICENSE\@ +Group: \@CPACK_RPM_PACKAGE_GROUP\@ +Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ +\@TMP_RPM_URL\@ +\@TMP_RPM_REQUIRES\@ +\@TMP_RPM_REQUIRES_PRE\@ +\@TMP_RPM_REQUIRES_POST\@ +\@TMP_RPM_REQUIRES_PREUN\@ +\@TMP_RPM_REQUIRES_POSTUN\@ +\@TMP_RPM_PROVIDES\@ +\@TMP_RPM_OBSOLETES\@ +\@TMP_RPM_CONFLICTS\@ +\@TMP_RPM_AUTOPROV\@ +\@TMP_RPM_AUTOREQ\@ +\@TMP_RPM_AUTOREQPROV\@ +\@TMP_RPM_BUILDARCH\@ +\@TMP_RPM_PREFIXES\@ + +%define _rpmdir \@CPACK_RPM_DIRECTORY\@ +%define _rpmfilename \@CPACK_RPM_FILE_NAME\@ +%define _unpackaged_files_terminate_build 0 +%define _topdir \@CPACK_RPM_DIRECTORY\@ +\@TMP_RPM_SPEC_INSTALL_POST\@ +\@CPACK_RPM_SPEC_MORE_DEFINE\@ +\@CPACK_RPM_COMPRESSION_TYPE_TMP\@ + +%description +\@CPACK_RPM_PACKAGE_DESCRIPTION\@ + +# This is a shortcutted spec file generated by CMake RPM generator +# we skip _install step because CPack does that for us. +# We do only save CPack installed tree in _prepr +# and then restore it in build. +%prep +mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" + +#p build + +%install +if [ -e $RPM_BUILD_ROOT ]; +then + rm -rf $RPM_BUILD_ROOT +fi +mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT + +%clean + +%post +\@CPACK_RPM_SPEC_POSTINSTALL\@ + +%postun +\@CPACK_RPM_SPEC_POSTUNINSTALL\@ + +%pre +\@CPACK_RPM_SPEC_PREINSTALL\@ + +%preun +\@CPACK_RPM_SPEC_PREUNINSTALL\@ + +%files +%defattr(-,root,root,-) +\@CPACK_RPM_INSTALL_FILES\@ +\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@ +\@CPACK_RPM_USER_INSTALL_FILES\@ + +%changelog +\@CPACK_RPM_SPEC_CHANGELOG\@ +") + # Stop here if we were asked to only generate a template USER spec file + # The generated file may then be used as a template by user who wants + # to customize their own spec file. + if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) + message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in") + endif() +endif() + +# After that we may either use a user provided spec file +# or generate one using appropriate variables value. +if(CPACK_RPM_USER_BINARY_SPECFILE) + # User may have specified SPECFILE just use it + message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") + # The user provided file is processed for @var replacement + configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) +else() + # No User specified spec file, will use the generated spec file + message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") + # Note the just created file is processed for @var replacement + configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) +endif() + +# remove AT protection +unset(PROTECTED_AT) + +if(RPMBUILD_EXECUTABLE) + # Now call rpmbuild using the SPECFILE + execute_process( + COMMAND "${RPMBUILD_EXECUTABLE}" -bb + --define "_topdir ${CPACK_RPM_DIRECTORY}" + --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + "${CPACK_RPM_BINARY_SPECFILE}" + WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT + ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err" + OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) + file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR) + file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT) + message("CPackRPM:Debug: You may consult rpmbuild logs in: ") + message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err") + message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out") + message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") + endif() +else() + if(ALIEN_EXECUTABLE) + message(FATAL_ERROR "RPM packaging through alien not done (yet)") + endif() +endif() + +# reset variables from temporary variables +if(CPACK_RPM_PACKAGE_SUMMARY_) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) +else() + unset(CPACK_RPM_PACKAGE_SUMMARY) +endif() +if(CPACK_RPM_PACKAGE_DESCRIPTION_) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) +else() + unset(CPACK_RPM_PACKAGE_DESCRIPTION) +endif() |