diff options
Diffstat (limited to 'share/cmake-3.17/Modules/UseEcos.cmake')
| -rw-r--r-- | share/cmake-3.17/Modules/UseEcos.cmake | 236 |
1 files changed, 0 insertions, 236 deletions
diff --git a/share/cmake-3.17/Modules/UseEcos.cmake b/share/cmake-3.17/Modules/UseEcos.cmake deleted file mode 100644 index 60324b1..0000000 --- a/share/cmake-3.17/Modules/UseEcos.cmake +++ /dev/null @@ -1,236 +0,0 @@ -# Distributed under the OSI-approved BSD 3-Clause License. See accompanying -# file Copyright.txt or https://cmake.org/licensing for details. - -#[=======================================================================[.rst: -UseEcos -------- - -This module defines variables and macros required to build eCos application. - -This file contains the following macros: -ECOS_ADD_INCLUDE_DIRECTORIES() - add the eCos include dirs -ECOS_ADD_EXECUTABLE(name source1 ... sourceN ) - create an eCos -executable ECOS_ADJUST_DIRECTORY(VAR source1 ... sourceN ) - adjusts -the path of the source files and puts the result into VAR - -Macros for selecting the toolchain: ECOS_USE_ARM_ELF_TOOLS() - enable -the ARM ELF toolchain for the directory where it is called -ECOS_USE_I386_ELF_TOOLS() - enable the i386 ELF toolchain for the -directory where it is called ECOS_USE_PPC_EABI_TOOLS() - enable the -PowerPC toolchain for the directory where it is called - -It contains the following variables: ECOS_DEFINITIONS -ECOSCONFIG_EXECUTABLE ECOS_CONFIG_FILE - defaults to ecos.ecc, if your -eCos configuration file has a different name, adjust this variable for -internal use only: - -:: - - ECOS_ADD_TARGET_LIB -#]=======================================================================] - -# first check that ecosconfig is available -find_program(ECOSCONFIG_EXECUTABLE NAMES ecosconfig) -if(NOT ECOSCONFIG_EXECUTABLE) - message(SEND_ERROR "ecosconfig was not found. Either include it in the system path or set it manually using ccmake.") -else() - message(STATUS "Found ecosconfig: ${ECOSCONFIG_EXECUTABLE}") -endif() - -# check that ECOS_REPOSITORY is set correctly -if (NOT EXISTS $ENV{ECOS_REPOSITORY}/ecos.db) - message(SEND_ERROR "The environment variable ECOS_REPOSITORY is not set correctly. Set it to the directory which contains the file ecos.db") -else () - message(STATUS "ECOS_REPOSITORY is set to $ENV{ECOS_REPOSITORY}") -endif () - -# check that tclsh (coming with TCL) is available, otherwise ecosconfig doesn't work -find_package(Tclsh) -if (NOT TCL_TCLSH) - message(SEND_ERROR "The TCL tclsh was not found. Please install TCL, it is required for building eCos applications.") -else () - message(STATUS "tlcsh found: ${TCL_TCLSH}") -endif () - -#add the globale include-diretories -#usage: ECOS_ADD_INCLUDE_DIRECTORIES() -macro(ECOS_ADD_INCLUDE_DIRECTORIES) -#check for ProjectSources.txt one level higher - if (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/../ProjectSources.txt) - include_directories(${CMAKE_CURRENT_SOURCE_DIR}/../) - else () - include_directories(${CMAKE_CURRENT_SOURCE_DIR}/) - endif () - -#the ecos include directory - include_directories(${CMAKE_CURRENT_BINARY_DIR}/ecos/install/include/) - -endmacro() - - -#we want to compile for the xscale processor, in this case the following macro has to be called -#usage: ECOS_USE_ARM_ELF_TOOLS() -macro (ECOS_USE_ARM_ELF_TOOLS) - set(CMAKE_CXX_COMPILER "arm-elf-c++") - set(CMAKE_COMPILER_IS_GNUCXX 1) - set(CMAKE_C_COMPILER "arm-elf-gcc") - set(CMAKE_AR "arm-elf-ar") - set(CMAKE_RANLIB "arm-elf-ranlib") -#for linking - set(ECOS_LD_MCPU "-mcpu=xscale") -#for compiling - add_definitions(-mcpu=xscale -mapcs-frame) -#for the obj-tools - set(ECOS_ARCH_PREFIX "arm-elf-") -endmacro () - -#usage: ECOS_USE_PPC_EABI_TOOLS() -macro (ECOS_USE_PPC_EABI_TOOLS) - set(CMAKE_CXX_COMPILER "powerpc-eabi-c++") - set(CMAKE_COMPILER_IS_GNUCXX 1) - set(CMAKE_C_COMPILER "powerpc-eabi-gcc") - set(CMAKE_AR "powerpc-eabi-ar") - set(CMAKE_RANLIB "powerpc-eabi-ranlib") -#for linking - set(ECOS_LD_MCPU "") -#for compiling - add_definitions() -#for the obj-tools - set(ECOS_ARCH_PREFIX "powerpc-eabi-") -endmacro () - -#usage: ECOS_USE_I386_ELF_TOOLS() -macro (ECOS_USE_I386_ELF_TOOLS) - set(CMAKE_CXX_COMPILER "i386-elf-c++") - set(CMAKE_COMPILER_IS_GNUCXX 1) - set(CMAKE_C_COMPILER "i386-elf-gcc") - set(CMAKE_AR "i386-elf-ar") - set(CMAKE_RANLIB "i386-elf-ranlib") -#for linking - set(ECOS_LD_MCPU "") -#for compiling - add_definitions() -#for the obj-tools - set(ECOS_ARCH_PREFIX "i386-elf-") -endmacro () - - -#since the actual sources are located one level upwards -#a "../" has to be prepended in front of every source file -#call the following macro to achieve this, the first parameter -#is the name of the new list of source files with adjusted paths, -#followed by all source files -#usage: ECOS_ADJUST_DIRECTORY(adjusted_SRCS ${my_srcs}) -macro(ECOS_ADJUST_DIRECTORY _target_FILES ) - foreach (_current_FILE ${ARGN}) - get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE) - if (NOT ${_abs_FILE} STREQUAL ${_current_FILE}) - get_filename_component(_abs_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../${_current_FILE} ABSOLUTE) - endif () - list(APPEND ${_target_FILES} ${_abs_FILE}) - endforeach () -endmacro() - -# the default ecos config file name -# maybe in future also out-of-source builds may be possible -set(ECOS_CONFIG_FILE ecos.ecc) - -#creates the dependency from all source files on the ecos target.ld, -#adds the command for compiling ecos -macro(ECOS_ADD_TARGET_LIB) -# when building out-of-source, create the ecos/ subdir - if(NOT EXISTS ${CMAKE_CURRENT_BINARY_DIR}/ecos) - file(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/ecos) - endif() - -#sources depend on target.ld - set_source_files_properties( - ${ARGN} - PROPERTIES - OBJECT_DEPENDS - ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld - ) - - add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld - COMMAND sh -c \"make -C ${CMAKE_CURRENT_BINARY_DIR}/ecos || exit -1\; if [ -e ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld ] \; then touch ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld\; fi\" - DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile - ) - - add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile - COMMAND sh -c \" cd ${CMAKE_CURRENT_BINARY_DIR}/ecos\; ${ECOSCONFIG_EXECUTABLE} --config=${CMAKE_CURRENT_SOURCE_DIR}/ecos/${ECOS_CONFIG_FILE} tree || exit -1\;\" - DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/ecos/${ECOS_CONFIG_FILE} - ) - - add_custom_target( ecos make -C ${CMAKE_CURRENT_BINARY_DIR}/ecos/ DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile ) -endmacro() - -# get the directory of the current file, used later on in the file -get_filename_component( ECOS_CMAKE_MODULE_DIR ${CMAKE_CURRENT_LIST_FILE} PATH) - -#macro for creating an executable ecos application -#the first parameter is the name of the executable, -#the second is the list of all source files (where the path -#has been adjusted beforehand by calling ECOS_ADJUST_DIRECTORY() -#usage: ECOS_ADD_EXECUTABLE(my_app ${adjusted_SRCS}) -macro(ECOS_ADD_EXECUTABLE _exe_NAME ) - #definitions, valid for all ecos projects - #the optimization and "-g" for debugging has to be enabled - #in the project-specific CMakeLists.txt - add_definitions(-D__ECOS__=1 -D__ECOS=1) - set(ECOS_DEFINITIONS -Wall -Wno-long-long -pipe -fno-builtin) - -#the executable depends on ecos target.ld - ECOS_ADD_TARGET_LIB(${ARGN}) - -# when using nmake makefiles, the custom buildtype suppresses the default cl.exe flags -# and the rules for creating objects are adjusted for gcc - set(CMAKE_BUILD_TYPE CUSTOM_ECOS_BUILD) - set(CMAKE_C_COMPILE_OBJECT "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>") - set(CMAKE_CXX_COMPILE_OBJECT "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>") -# special link commands for ecos-executables - set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_CXX_COMPILER> <CMAKE_CXX_LINK_FLAGS> <OBJECTS> -o <TARGET> ${_ecos_EXTRA_LIBS} -nostdlib -nostartfiles -L${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib -Ttarget.ld ${ECOS_LD_MCPU}") - set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> <CMAKE_C_LINK_FLAGS> <OBJECTS> -o <TARGET> ${_ecos_EXTRA_LIBS} -nostdlib -nostartfiles -L${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib -Ttarget.ld ${ECOS_LD_MCPU}") -# some strict compiler flags - set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wstrict-prototypes") - set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Woverloaded-virtual -fno-rtti -Wctor-dtor-privacy -fno-strict-aliasing -fno-exceptions") - - add_executable(${_exe_NAME} ${ARGN}) - set_target_properties(${_exe_NAME} PROPERTIES SUFFIX ".elf") - -#create a binary file - add_custom_command( - TARGET ${_exe_NAME} - POST_BUILD - COMMAND ${ECOS_ARCH_PREFIX}objcopy - ARGS -O binary ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.bin - ) - -#and an srec file - add_custom_command( - TARGET ${_exe_NAME} - POST_BUILD - COMMAND ${ECOS_ARCH_PREFIX}objcopy - ARGS -O srec ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.srec - ) - -#add the created files to the clean-files - set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_CLEAN_FILES - "${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.bin" - "${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.srec" - "${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst") - - add_custom_target(ecosclean ${CMAKE_COMMAND} -DECOS_DIR=${CMAKE_CURRENT_BINARY_DIR}/ecos/ -P ${ECOS_CMAKE_MODULE_DIR}/ecos_clean.cmake ) - add_custom_target(normalclean ${CMAKE_MAKE_PROGRAM} clean WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}) - add_dependencies (ecosclean normalclean) - - - add_custom_target( listing - COMMAND echo -e \"\\n--- Symbols sorted by address ---\\n\" > ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst - COMMAND ${ECOS_ARCH_PREFIX}nm -S -C -n ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst - COMMAND echo -e \"\\n--- Symbols sorted by size ---\\n\" >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst - COMMAND ${ECOS_ARCH_PREFIX}nm -S -C -r --size-sort ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst - COMMAND echo -e \"\\n--- Full assembly listing ---\\n\" >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst - COMMAND ${ECOS_ARCH_PREFIX}objdump -S -x -d -C ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst ) - -endmacro() - |