diff options
Diffstat (limited to 'testapps/testProjectTest')
40 files changed, 1064 insertions, 0 deletions
diff --git a/testapps/testProjectTest/COMPILE_AND_RUN b/testapps/testProjectTest/COMPILE_AND_RUN new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/testapps/testProjectTest/COMPILE_AND_RUN diff --git a/testapps/testProjectTest/SUCCESS b/testapps/testProjectTest/SUCCESS new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/testapps/testProjectTest/SUCCESS diff --git a/testapps/testProjectTest/app/.classpath b/testapps/testProjectTest/app/.classpath new file mode 100644 index 000000000..a4763d1ee --- /dev/null +++ b/testapps/testProjectTest/app/.classpath @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?> +<classpath> + <classpathentry kind="src" path="src"/> + <classpathentry kind="src" path="gen"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.ANDROID_FRAMEWORK"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.LIBRARIES"/> + <classpathentry kind="output" path="bin/classes"/> +</classpath> diff --git a/testapps/testProjectTest/app/.project b/testapps/testProjectTest/app/.project new file mode 100644 index 000000000..344feb870 --- /dev/null +++ b/testapps/testProjectTest/app/.project @@ -0,0 +1,33 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>testProjectTest-app</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>com.android.ide.eclipse.adt.ResourceManagerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.PreCompilerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.jdt.core.javabuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.ApkBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>com.android.ide.eclipse.adt.AndroidNature</nature> + <nature>org.eclipse.jdt.core.javanature</nature> + </natures> +</projectDescription> diff --git a/testapps/testProjectTest/app/AndroidManifest.xml b/testapps/testProjectTest/app/AndroidManifest.xml new file mode 100644 index 000000000..41e6b82bd --- /dev/null +++ b/testapps/testProjectTest/app/AndroidManifest.xml @@ -0,0 +1,14 @@ +<?xml version="1.0" encoding="utf-8"?> +<manifest xmlns:android="http://schemas.android.com/apk/res/android" + package="com.android.tests.testprojecttest.app" + android:versionCode="1" + android:versionName="1.0" > + + <uses-sdk android:minSdkVersion="15" /> + + <application + android:icon="@drawable/ic_launcher" + android:label="@string/app_name" > + </application> + +</manifest>
\ No newline at end of file diff --git a/testapps/testProjectTest/app/build.xml b/testapps/testProjectTest/app/build.xml new file mode 100644 index 000000000..1a886cebe --- /dev/null +++ b/testapps/testProjectTest/app/build.xml @@ -0,0 +1,92 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project name="testProjectTest-app" default="help"> + + <!-- The local.properties file is created and updated by the 'android' tool. + It contains the path to the SDK. It should *NOT* be checked into + Version Control Systems. --> + <property file="local.properties" /> + + <!-- The ant.properties file can be created by you. It is only edited by the + 'android' tool to add properties to it. + This is the place to change some Ant specific build properties. + Here are some properties you may want to change/update: + + source.dir + The name of the source directory. Default is 'src'. + out.dir + The name of the output directory. Default is 'bin'. + + For other overridable properties, look at the beginning of the rules + files in the SDK, at tools/ant/build.xml + + Properties related to the SDK location or the project target should + be updated using the 'android' tool with the 'update' action. + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. + + --> + <property file="ant.properties" /> + + <!-- if sdk.dir was not set from one of the property file, then + get it from the ANDROID_HOME env var. + This must be done before we load project.properties since + the proguard config can use sdk.dir --> + <property environment="env" /> + <condition property="sdk.dir" value="${env.ANDROID_HOME}"> + <isset property="env.ANDROID_HOME" /> + </condition> + + <!-- The project.properties file is created and updated by the 'android' + tool, as well as ADT. + + This contains project specific properties such as project target, and library + dependencies. Lower level build properties are stored in ant.properties + (or in .classpath for Eclipse projects). + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. --> + <loadproperties srcFile="project.properties" /> + + <!-- quick check on sdk.dir --> + <fail + message="sdk.dir is missing. Make sure to generate local.properties using 'android update project' or to inject it through the ANDROID_HOME environment variable." + unless="sdk.dir" + /> + + <!-- + Import per project custom build rules if present at the root of the project. + This is the place to put custom intermediary targets such as: + -pre-build + -pre-compile + -post-compile (This is typically used for code obfuscation. + Compiled code location: ${out.classes.absolute.dir} + If this is not done in place, override ${out.dex.input.absolute.dir}) + -post-package + -post-build + -pre-clean + --> + <import file="custom_rules.xml" optional="true" /> + + <!-- Import the actual build file. + + To customize existing targets, there are two options: + - Customize only one target: + - copy/paste the target into this file, *before* the + <import> task. + - customize it to your needs. + - Customize the whole content of build.xml + - copy/paste the content of the rules files (minus the top node) + into this file, replacing the <import> task. + - customize to your needs. + + *********************** + ****** IMPORTANT ****** + *********************** + In all cases you must update the value of version-tag below to read 'custom' instead of an integer, + in order to avoid having your file be overridden by tools such as "android update project" + --> + <!-- version-tag: 1 --> + <import file="${sdk.dir}/tools/ant/build.xml" /> + +</project> diff --git a/testapps/testProjectTest/app/proguard-project.txt b/testapps/testProjectTest/app/proguard-project.txt new file mode 100644 index 000000000..f2fe1559a --- /dev/null +++ b/testapps/testProjectTest/app/proguard-project.txt @@ -0,0 +1,20 @@ +# To enable ProGuard in your project, edit project.properties +# to define the proguard.config property as described in that file. +# +# Add project specific ProGuard rules here. +# By default, the flags in this file are appended to flags specified +# in ${sdk.dir}/tools/proguard/proguard-android.txt +# You can edit the include path and order by changing the ProGuard +# include property in project.properties. +# +# For more details, see +# http://developer.android.com/guide/developing/tools/proguard.html + +# Add any project specific keep options here: + +# If your project uses WebView with JS, uncomment the following +# and specify the fully qualified class name to the JavaScript interface +# class: +#-keepclassmembers class fqcn.of.javascript.interface.for.webview { +# public *; +#} diff --git a/testapps/testProjectTest/app/project.properties b/testapps/testProjectTest/app/project.properties new file mode 100644 index 000000000..01b6493a0 --- /dev/null +++ b/testapps/testProjectTest/app/project.properties @@ -0,0 +1,16 @@ +# This file is automatically generated by Android Tools. +# Do not modify this file -- YOUR CHANGES WILL BE ERASED! +# +# This file must be checked in Version Control Systems. +# +# To customize properties used by the Ant build system edit +# "ant.properties", and override values to adapt the script to your +# project structure. +# +# To enable ProGuard to shrink and obfuscate your code, uncomment this (available properties: sdk.dir, user.home): +#proguard.config=${sdk.dir}/tools/proguard/proguard-android.txt:proguard-project.txt + +# Project target. +target=android-15 +android.library.reference.1=../lib +manifestmerger.enabled=true diff --git a/testapps/testProjectTest/app/res/drawable-hdpi/ic_launcher.png b/testapps/testProjectTest/app/res/drawable-hdpi/ic_launcher.png Binary files differnew file mode 100644 index 000000000..96a442e5b --- /dev/null +++ b/testapps/testProjectTest/app/res/drawable-hdpi/ic_launcher.png diff --git a/testapps/testProjectTest/app/res/drawable-ldpi/ic_launcher.png b/testapps/testProjectTest/app/res/drawable-ldpi/ic_launcher.png Binary files differnew file mode 100644 index 000000000..99238729d --- /dev/null +++ b/testapps/testProjectTest/app/res/drawable-ldpi/ic_launcher.png diff --git a/testapps/testProjectTest/app/res/drawable-mdpi/ic_launcher.png b/testapps/testProjectTest/app/res/drawable-mdpi/ic_launcher.png Binary files differnew file mode 100644 index 000000000..359047dfa --- /dev/null +++ b/testapps/testProjectTest/app/res/drawable-mdpi/ic_launcher.png diff --git a/testapps/testProjectTest/app/res/drawable-xhdpi/ic_launcher.png b/testapps/testProjectTest/app/res/drawable-xhdpi/ic_launcher.png Binary files differnew file mode 100644 index 000000000..71c6d760f --- /dev/null +++ b/testapps/testProjectTest/app/res/drawable-xhdpi/ic_launcher.png diff --git a/testapps/testProjectTest/app/res/values/strings.xml b/testapps/testProjectTest/app/res/values/strings.xml new file mode 100644 index 000000000..c933032e7 --- /dev/null +++ b/testapps/testProjectTest/app/res/values/strings.xml @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="utf-8"?> +<resources> + + <string name="app_name">TestProjectTest-app</string> + +</resources>
\ No newline at end of file diff --git a/testapps/testProjectTest/app/src/readme.txt b/testapps/testProjectTest/app/src/readme.txt new file mode 100644 index 000000000..103fd769f --- /dev/null +++ b/testapps/testProjectTest/app/src/readme.txt @@ -0,0 +1 @@ +Just there so that the src folder doesn't disappear.
\ No newline at end of file diff --git a/testapps/testProjectTest/lib/.classpath b/testapps/testProjectTest/lib/.classpath new file mode 100644 index 000000000..a4763d1ee --- /dev/null +++ b/testapps/testProjectTest/lib/.classpath @@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?> +<classpath> + <classpathentry kind="src" path="src"/> + <classpathentry kind="src" path="gen"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.ANDROID_FRAMEWORK"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.LIBRARIES"/> + <classpathentry kind="output" path="bin/classes"/> +</classpath> diff --git a/testapps/testProjectTest/lib/.project b/testapps/testProjectTest/lib/.project new file mode 100644 index 000000000..274b51241 --- /dev/null +++ b/testapps/testProjectTest/lib/.project @@ -0,0 +1,33 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>testProjectTest-lib</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>com.android.ide.eclipse.adt.ResourceManagerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.PreCompilerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.jdt.core.javabuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.ApkBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>com.android.ide.eclipse.adt.AndroidNature</nature> + <nature>org.eclipse.jdt.core.javanature</nature> + </natures> +</projectDescription> diff --git a/testapps/testProjectTest/lib/AndroidManifest.xml b/testapps/testProjectTest/lib/AndroidManifest.xml new file mode 100644 index 000000000..b8bc11cab --- /dev/null +++ b/testapps/testProjectTest/lib/AndroidManifest.xml @@ -0,0 +1,20 @@ +<?xml version="1.0" encoding="utf-8"?> +<manifest xmlns:android="http://schemas.android.com/apk/res/android" + package="com.android.tests.testprojecttest.lib" + android:versionCode="1" + android:versionName="1.0" > + + <uses-sdk android:minSdkVersion="15" /> + + <application> + <activity + android:name="com.android.tests.testprojecttest.lib.LibActivity" + android:label="@string/app_name" > + <intent-filter> + <action android:name="android.intent.action.MAIN" /> + <category android:name="android.intent.category.LAUNCHER" /> + </intent-filter> + </activity> + </application> + +</manifest>
\ No newline at end of file diff --git a/testapps/testProjectTest/lib/build.xml b/testapps/testProjectTest/lib/build.xml new file mode 100644 index 000000000..88c684568 --- /dev/null +++ b/testapps/testProjectTest/lib/build.xml @@ -0,0 +1,92 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project name="testProjectTest-lib" default="help"> + + <!-- The local.properties file is created and updated by the 'android' tool. + It contains the path to the SDK. It should *NOT* be checked into + Version Control Systems. --> + <property file="local.properties" /> + + <!-- The ant.properties file can be created by you. It is only edited by the + 'android' tool to add properties to it. + This is the place to change some Ant specific build properties. + Here are some properties you may want to change/update: + + source.dir + The name of the source directory. Default is 'src'. + out.dir + The name of the output directory. Default is 'bin'. + + For other overridable properties, look at the beginning of the rules + files in the SDK, at tools/ant/build.xml + + Properties related to the SDK location or the project target should + be updated using the 'android' tool with the 'update' action. + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. + + --> + <property file="ant.properties" /> + + <!-- if sdk.dir was not set from one of the property file, then + get it from the ANDROID_HOME env var. + This must be done before we load project.properties since + the proguard config can use sdk.dir --> + <property environment="env" /> + <condition property="sdk.dir" value="${env.ANDROID_HOME}"> + <isset property="env.ANDROID_HOME" /> + </condition> + + <!-- The project.properties file is created and updated by the 'android' + tool, as well as ADT. + + This contains project specific properties such as project target, and library + dependencies. Lower level build properties are stored in ant.properties + (or in .classpath for Eclipse projects). + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. --> + <loadproperties srcFile="project.properties" /> + + <!-- quick check on sdk.dir --> + <fail + message="sdk.dir is missing. Make sure to generate local.properties using 'android update project' or to inject it through the ANDROID_HOME environment variable." + unless="sdk.dir" + /> + + <!-- + Import per project custom build rules if present at the root of the project. + This is the place to put custom intermediary targets such as: + -pre-build + -pre-compile + -post-compile (This is typically used for code obfuscation. + Compiled code location: ${out.classes.absolute.dir} + If this is not done in place, override ${out.dex.input.absolute.dir}) + -post-package + -post-build + -pre-clean + --> + <import file="custom_rules.xml" optional="true" /> + + <!-- Import the actual build file. + + To customize existing targets, there are two options: + - Customize only one target: + - copy/paste the target into this file, *before* the + <import> task. + - customize it to your needs. + - Customize the whole content of build.xml + - copy/paste the content of the rules files (minus the top node) + into this file, replacing the <import> task. + - customize to your needs. + + *********************** + ****** IMPORTANT ****** + *********************** + In all cases you must update the value of version-tag below to read 'custom' instead of an integer, + in order to avoid having your file be overridden by tools such as "android update project" + --> + <!-- version-tag: 1 --> + <import file="${sdk.dir}/tools/ant/build.xml" /> + +</project> diff --git a/testapps/testProjectTest/lib/proguard-project.txt b/testapps/testProjectTest/lib/proguard-project.txt new file mode 100644 index 000000000..f2fe1559a --- /dev/null +++ b/testapps/testProjectTest/lib/proguard-project.txt @@ -0,0 +1,20 @@ +# To enable ProGuard in your project, edit project.properties +# to define the proguard.config property as described in that file. +# +# Add project specific ProGuard rules here. +# By default, the flags in this file are appended to flags specified +# in ${sdk.dir}/tools/proguard/proguard-android.txt +# You can edit the include path and order by changing the ProGuard +# include property in project.properties. +# +# For more details, see +# http://developer.android.com/guide/developing/tools/proguard.html + +# Add any project specific keep options here: + +# If your project uses WebView with JS, uncomment the following +# and specify the fully qualified class name to the JavaScript interface +# class: +#-keepclassmembers class fqcn.of.javascript.interface.for.webview { +# public *; +#} diff --git a/testapps/testProjectTest/lib/project.properties b/testapps/testProjectTest/lib/project.properties new file mode 100644 index 000000000..36f15941e --- /dev/null +++ b/testapps/testProjectTest/lib/project.properties @@ -0,0 +1,15 @@ +# This file is automatically generated by Android Tools. +# Do not modify this file -- YOUR CHANGES WILL BE ERASED! +# +# This file must be checked in Version Control Systems. +# +# To customize properties used by the Ant build system edit +# "ant.properties", and override values to adapt the script to your +# project structure. +# +# To enable ProGuard to shrink and obfuscate your code, uncomment this (available properties: sdk.dir, user.home): +#proguard.config=${sdk.dir}/tools/proguard/proguard-android.txt:proguard-project.txt + +# Project target. +target=android-15 +android.library=true diff --git a/testapps/testProjectTest/lib/res/layout/main.xml b/testapps/testProjectTest/lib/res/layout/main.xml new file mode 100644 index 000000000..14a9c4bb7 --- /dev/null +++ b/testapps/testProjectTest/lib/res/layout/main.xml @@ -0,0 +1,15 @@ +<?xml version="1.0" encoding="utf-8"?> +<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" + xmlns:tools="http://schemas.android.com/tools" + android:layout_width="fill_parent" + android:layout_height="fill_parent" + android:orientation="vertical" > + + <TextView + android:id="@+id/text" + android:layout_width="fill_parent" + android:layout_height="wrap_content" + android:text="some string" + tools:ignore="HardcodedText" /> + +</LinearLayout>
\ No newline at end of file diff --git a/testapps/testProjectTest/lib/res/values/strings.xml b/testapps/testProjectTest/lib/res/values/strings.xml new file mode 100644 index 000000000..fdb227260 --- /dev/null +++ b/testapps/testProjectTest/lib/res/values/strings.xml @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="utf-8"?> +<resources> + + <string name="app_name">TestProjectTest-lib</string> + +</resources>
\ No newline at end of file diff --git a/testapps/testProjectTest/lib/src/com/android/tests/testprojecttest/lib/LibActivity.java b/testapps/testProjectTest/lib/src/com/android/tests/testprojecttest/lib/LibActivity.java new file mode 100644 index 000000000..7d7f6079e --- /dev/null +++ b/testapps/testProjectTest/lib/src/com/android/tests/testprojecttest/lib/LibActivity.java @@ -0,0 +1,13 @@ +package com.android.tests.testprojecttest.lib; + +import android.app.Activity; +import android.os.Bundle; + +public class LibActivity extends Activity { + /** Called when the activity is first created. */ + @Override + public void onCreate(Bundle savedInstanceState) { + super.onCreate(savedInstanceState); + setContentView(R.layout.main); + } +}
\ No newline at end of file diff --git a/testapps/testProjectTest/testapp/.classpath b/testapps/testProjectTest/testapp/.classpath new file mode 100644 index 000000000..9afbc3814 --- /dev/null +++ b/testapps/testProjectTest/testapp/.classpath @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8"?> +<classpath> + <classpathentry kind="src" path="src"/> + <classpathentry kind="src" path="gen"/> + <classpathentry combineaccessrules="false" kind="src" path="/testProjectTest-app"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.ANDROID_FRAMEWORK"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.LIBRARIES"/> + <classpathentry kind="output" path="bin/classes"/> +</classpath> diff --git a/testapps/testProjectTest/testapp/.project b/testapps/testProjectTest/testapp/.project new file mode 100644 index 000000000..796ccc1da --- /dev/null +++ b/testapps/testProjectTest/testapp/.project @@ -0,0 +1,34 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>testProjectTest-testapp</name> + <comment></comment> + <projects> + <project>testProjectTest-app</project> + </projects> + <buildSpec> + <buildCommand> + <name>com.android.ide.eclipse.adt.ResourceManagerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.PreCompilerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.jdt.core.javabuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.ApkBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>com.android.ide.eclipse.adt.AndroidNature</nature> + <nature>org.eclipse.jdt.core.javanature</nature> + </natures> +</projectDescription> diff --git a/testapps/testProjectTest/testapp/AndroidManifest.xml b/testapps/testProjectTest/testapp/AndroidManifest.xml new file mode 100644 index 000000000..5252972bc --- /dev/null +++ b/testapps/testProjectTest/testapp/AndroidManifest.xml @@ -0,0 +1,27 @@ +<?xml version="1.0" encoding="utf-8"?> +<manifest xmlns:android="http://schemas.android.com/apk/res/android" + package="com.android.tests.testprojecttest.test" + android:versionCode="1" + android:versionName="1.0" > + + <uses-sdk android:minSdkVersion="15" /> + + <!-- + We add an application tag here just so that we can indicate that + this package needs to link against the android.test library, + which is needed when building test cases. + --> + <application android:label="testProjectTest-testapp"> + <uses-library android:name="android.test.runner" /> + </application> + + <!-- + This declares that this app uses the instrumentation test runner targeting + the package of com.android.tests.testprojecttest.app. To run the tests use the command: + "adb shell am instrument -w com.android.tests.testprojecttest.test/android.test.InstrumentationTestRunner" + --> + <instrumentation + android:name="android.test.InstrumentationTestRunner" + android:targetPackage="com.android.tests.testprojecttest.app" /> + +</manifest>
\ No newline at end of file diff --git a/testapps/testProjectTest/testapp/build.xml b/testapps/testProjectTest/testapp/build.xml new file mode 100644 index 000000000..4f12210eb --- /dev/null +++ b/testapps/testProjectTest/testapp/build.xml @@ -0,0 +1,92 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project name="testProjectTest-testapp" default="help"> + + <!-- The local.properties file is created and updated by the 'android' tool. + It contains the path to the SDK. It should *NOT* be checked into + Version Control Systems. --> + <property file="local.properties" /> + + <!-- The ant.properties file can be created by you. It is only edited by the + 'android' tool to add properties to it. + This is the place to change some Ant specific build properties. + Here are some properties you may want to change/update: + + source.dir + The name of the source directory. Default is 'src'. + out.dir + The name of the output directory. Default is 'bin'. + + For other overridable properties, look at the beginning of the rules + files in the SDK, at tools/ant/build.xml + + Properties related to the SDK location or the project target should + be updated using the 'android' tool with the 'update' action. + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. + + --> + <property file="ant.properties" /> + + <!-- if sdk.dir was not set from one of the property file, then + get it from the ANDROID_HOME env var. + This must be done before we load project.properties since + the proguard config can use sdk.dir --> + <property environment="env" /> + <condition property="sdk.dir" value="${env.ANDROID_HOME}"> + <isset property="env.ANDROID_HOME" /> + </condition> + + <!-- The project.properties file is created and updated by the 'android' + tool, as well as ADT. + + This contains project specific properties such as project target, and library + dependencies. Lower level build properties are stored in ant.properties + (or in .classpath for Eclipse projects). + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. --> + <loadproperties srcFile="project.properties" /> + + <!-- quick check on sdk.dir --> + <fail + message="sdk.dir is missing. Make sure to generate local.properties using 'android update project' or to inject it through the ANDROID_HOME environment variable." + unless="sdk.dir" + /> + + <!-- + Import per project custom build rules if present at the root of the project. + This is the place to put custom intermediary targets such as: + -pre-build + -pre-compile + -post-compile (This is typically used for code obfuscation. + Compiled code location: ${out.classes.absolute.dir} + If this is not done in place, override ${out.dex.input.absolute.dir}) + -post-package + -post-build + -pre-clean + --> + <import file="custom_rules.xml" optional="true" /> + + <!-- Import the actual build file. + + To customize existing targets, there are two options: + - Customize only one target: + - copy/paste the target into this file, *before* the + <import> task. + - customize it to your needs. + - Customize the whole content of build.xml + - copy/paste the content of the rules files (minus the top node) + into this file, replacing the <import> task. + - customize to your needs. + + *********************** + ****** IMPORTANT ****** + *********************** + In all cases you must update the value of version-tag below to read 'custom' instead of an integer, + in order to avoid having your file be overridden by tools such as "android update project" + --> + <!-- version-tag: 1 --> + <import file="${sdk.dir}/tools/ant/build.xml" /> + +</project> diff --git a/testapps/testProjectTest/testapp/proguard-project.txt b/testapps/testProjectTest/testapp/proguard-project.txt new file mode 100644 index 000000000..f2fe1559a --- /dev/null +++ b/testapps/testProjectTest/testapp/proguard-project.txt @@ -0,0 +1,20 @@ +# To enable ProGuard in your project, edit project.properties +# to define the proguard.config property as described in that file. +# +# Add project specific ProGuard rules here. +# By default, the flags in this file are appended to flags specified +# in ${sdk.dir}/tools/proguard/proguard-android.txt +# You can edit the include path and order by changing the ProGuard +# include property in project.properties. +# +# For more details, see +# http://developer.android.com/guide/developing/tools/proguard.html + +# Add any project specific keep options here: + +# If your project uses WebView with JS, uncomment the following +# and specify the fully qualified class name to the JavaScript interface +# class: +#-keepclassmembers class fqcn.of.javascript.interface.for.webview { +# public *; +#} diff --git a/testapps/testProjectTest/testapp/project.properties b/testapps/testProjectTest/testapp/project.properties new file mode 100644 index 000000000..4c13b857b --- /dev/null +++ b/testapps/testProjectTest/testapp/project.properties @@ -0,0 +1,15 @@ +# This file is automatically generated by Android Tools. +# Do not modify this file -- YOUR CHANGES WILL BE ERASED! +# +# This file must be checked in Version Control Systems. +# +# To customize properties used by the Ant build system edit +# "ant.properties", and override values to adapt the script to your +# project structure. +# +# To enable ProGuard to shrink and obfuscate your code, uncomment this (available properties: sdk.dir, user.home): +#proguard.config=${sdk.dir}/tools/proguard/proguard-android.txt:proguard-project.txt + +# Project target. +target=android-15 +tested.project.dir=../app diff --git a/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/lib/LibActivityTest.java b/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/lib/LibActivityTest.java new file mode 100644 index 000000000..9be6f97d2 --- /dev/null +++ b/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/lib/LibActivityTest.java @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +package com.android.tests.testprojecttest.lib; + +import android.test.ActivityInstrumentationTestCase2; +import android.test.suitebuilder.annotation.MediumTest; +import android.widget.TextView; + +import com.android.tests.testprojecttest.app.R; + +/** + * An example of an {@link ActivityInstrumentationTestCase2} of a specific activity {@link Focus2}. + * By virtue of extending {@link ActivityInstrumentationTestCase2}, the target activity is automatically + * launched and finished before and after each test. This also extends + * {@link android.test.InstrumentationTestCase}, which provides + * access to methods for sending events to the target activity, such as key and + * touch events. See {@link #sendKeys}. + * + * In general, {@link android.test.InstrumentationTestCase}s and {@link ActivityInstrumentationTestCase2}s + * are heavier weight functional tests available for end to end testing of your + * user interface. When run via a {@link android.test.InstrumentationTestRunner}, + * the necessary {@link android.app.Instrumentation} will be injected for you to + * user via {@link #getInstrumentation} in your tests. + * + * See {@link com.example.android.apis.AllTests} for documentation on running + * all tests and individual tests in this application. + */ +public class LibActivityTest extends ActivityInstrumentationTestCase2<LibActivity> { + + private TextView mTextView; + + /** + * Creates an {@link ActivityInstrumentationTestCase2} that tests the {@link Focus2} activity. + */ + public LibActivityTest() { + super(LibActivity.class); + } + + @Override + protected void setUp() throws Exception { + super.setUp(); + final LibActivity a = getActivity(); + // ensure a valid handle to the activity has been returned + assertNotNull(a); + mTextView = (TextView) a.findViewById(R.id.text); + } + + /** + * The name 'test preconditions' is a convention to signal that if this + * test doesn't pass, the test case was not set up properly and it might + * explain any and all failures in other tests. This is not guaranteed + * to run before other tests, as junit uses reflection to find the tests. + */ + @MediumTest + public void testPreconditions() { + assertNotNull(mTextView); + } +} diff --git a/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/test/AllTests.java b/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/test/AllTests.java new file mode 100644 index 000000000..a77b53ce8 --- /dev/null +++ b/testapps/testProjectTest/testapp/src/com/android/tests/testprojecttest/test/AllTests.java @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +package com.android.tests.testprojecttest.test; + +import junit.framework.Test; +import junit.framework.TestSuite; + +import android.test.suitebuilder.TestSuiteBuilder; + +/** + * A test suite containing all tests for ApiDemos. + * + * To run all suites found in this apk: + * $ adb shell am instrument -w \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run just this suite from the command line: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.AllTests \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run an individual test case, e.g. {@link com.example.android.apis.os.MorseCodeConverterTest}: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.os.MorseCodeConverterTest \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run an individual test, e.g. {@link com.example.android.apis.os.MorseCodeConverterTest#testCharacterS()}: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.os.MorseCodeConverterTest#testCharacterS \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + */ +public class AllTests extends TestSuite { + + public static Test suite() { + return new TestSuiteBuilder(AllTests.class) + .includeAllPackagesUnderHere() + .build(); + } +} diff --git a/testapps/testProjectTest/testlib/.classpath b/testapps/testProjectTest/testlib/.classpath new file mode 100644 index 000000000..9afbc3814 --- /dev/null +++ b/testapps/testProjectTest/testlib/.classpath @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8"?> +<classpath> + <classpathentry kind="src" path="src"/> + <classpathentry kind="src" path="gen"/> + <classpathentry combineaccessrules="false" kind="src" path="/testProjectTest-app"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.ANDROID_FRAMEWORK"/> + <classpathentry kind="con" path="com.android.ide.eclipse.adt.LIBRARIES"/> + <classpathentry kind="output" path="bin/classes"/> +</classpath> diff --git a/testapps/testProjectTest/testlib/.project b/testapps/testProjectTest/testlib/.project new file mode 100644 index 000000000..84502179a --- /dev/null +++ b/testapps/testProjectTest/testlib/.project @@ -0,0 +1,34 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>testProjectTest-testlib</name> + <comment></comment> + <projects> + <project>testProjectTest-app</project> + </projects> + <buildSpec> + <buildCommand> + <name>com.android.ide.eclipse.adt.ResourceManagerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.PreCompilerBuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.jdt.core.javabuilder</name> + <arguments> + </arguments> + </buildCommand> + <buildCommand> + <name>com.android.ide.eclipse.adt.ApkBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>com.android.ide.eclipse.adt.AndroidNature</nature> + <nature>org.eclipse.jdt.core.javanature</nature> + </natures> +</projectDescription> diff --git a/testapps/testProjectTest/testlib/AndroidManifest.xml b/testapps/testProjectTest/testlib/AndroidManifest.xml new file mode 100644 index 000000000..93b02e420 --- /dev/null +++ b/testapps/testProjectTest/testlib/AndroidManifest.xml @@ -0,0 +1,27 @@ +<?xml version="1.0" encoding="utf-8"?> +<manifest xmlns:android="http://schemas.android.com/apk/res/android" + package="com.android.tests.testprojecttest.testlib" + android:versionCode="1" + android:versionName="1.0" > + + <uses-sdk android:minSdkVersion="15" /> + + <!-- + We add an application tag here just so that we can indicate that + this package needs to link against the android.test library, + which is needed when building test cases. + --> + <application android:label="testProjectTest-testlib"> + <uses-library android:name="android.test.runner" /> + </application> + + <!-- + This declares that this app uses the instrumentation test runner targeting + the package of com.android.tests.testprojecttest.testlib. To run the tests use the command: + "adb shell am instrument -w com.android.tests.testprojecttest.testlib/android.test.InstrumentationTestRunner" + --> + <instrumentation + android:name="android.test.InstrumentationTestRunner" + android:targetPackage="com.android.tests.testprojecttest.testlib" /> + +</manifest>
\ No newline at end of file diff --git a/testapps/testProjectTest/testlib/build.xml b/testapps/testProjectTest/testlib/build.xml new file mode 100644 index 000000000..b59cc6570 --- /dev/null +++ b/testapps/testProjectTest/testlib/build.xml @@ -0,0 +1,92 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project name="testProjectTest-testlib" default="help"> + + <!-- The local.properties file is created and updated by the 'android' tool. + It contains the path to the SDK. It should *NOT* be checked into + Version Control Systems. --> + <property file="local.properties" /> + + <!-- The ant.properties file can be created by you. It is only edited by the + 'android' tool to add properties to it. + This is the place to change some Ant specific build properties. + Here are some properties you may want to change/update: + + source.dir + The name of the source directory. Default is 'src'. + out.dir + The name of the output directory. Default is 'bin'. + + For other overridable properties, look at the beginning of the rules + files in the SDK, at tools/ant/build.xml + + Properties related to the SDK location or the project target should + be updated using the 'android' tool with the 'update' action. + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. + + --> + <property file="ant.properties" /> + + <!-- if sdk.dir was not set from one of the property file, then + get it from the ANDROID_HOME env var. + This must be done before we load project.properties since + the proguard config can use sdk.dir --> + <property environment="env" /> + <condition property="sdk.dir" value="${env.ANDROID_HOME}"> + <isset property="env.ANDROID_HOME" /> + </condition> + + <!-- The project.properties file is created and updated by the 'android' + tool, as well as ADT. + + This contains project specific properties such as project target, and library + dependencies. Lower level build properties are stored in ant.properties + (or in .classpath for Eclipse projects). + + This file is an integral part of the build system for your + application and should be checked into Version Control Systems. --> + <loadproperties srcFile="project.properties" /> + + <!-- quick check on sdk.dir --> + <fail + message="sdk.dir is missing. Make sure to generate local.properties using 'android update project' or to inject it through the ANDROID_HOME environment variable." + unless="sdk.dir" + /> + + <!-- + Import per project custom build rules if present at the root of the project. + This is the place to put custom intermediary targets such as: + -pre-build + -pre-compile + -post-compile (This is typically used for code obfuscation. + Compiled code location: ${out.classes.absolute.dir} + If this is not done in place, override ${out.dex.input.absolute.dir}) + -post-package + -post-build + -pre-clean + --> + <import file="custom_rules.xml" optional="true" /> + + <!-- Import the actual build file. + + To customize existing targets, there are two options: + - Customize only one target: + - copy/paste the target into this file, *before* the + <import> task. + - customize it to your needs. + - Customize the whole content of build.xml + - copy/paste the content of the rules files (minus the top node) + into this file, replacing the <import> task. + - customize to your needs. + + *********************** + ****** IMPORTANT ****** + *********************** + In all cases you must update the value of version-tag below to read 'custom' instead of an integer, + in order to avoid having your file be overridden by tools such as "android update project" + --> + <!-- version-tag: 1 --> + <import file="${sdk.dir}/tools/ant/build.xml" /> + +</project> diff --git a/testapps/testProjectTest/testlib/proguard-project.txt b/testapps/testProjectTest/testlib/proguard-project.txt new file mode 100644 index 000000000..f2fe1559a --- /dev/null +++ b/testapps/testProjectTest/testlib/proguard-project.txt @@ -0,0 +1,20 @@ +# To enable ProGuard in your project, edit project.properties +# to define the proguard.config property as described in that file. +# +# Add project specific ProGuard rules here. +# By default, the flags in this file are appended to flags specified +# in ${sdk.dir}/tools/proguard/proguard-android.txt +# You can edit the include path and order by changing the ProGuard +# include property in project.properties. +# +# For more details, see +# http://developer.android.com/guide/developing/tools/proguard.html + +# Add any project specific keep options here: + +# If your project uses WebView with JS, uncomment the following +# and specify the fully qualified class name to the JavaScript interface +# class: +#-keepclassmembers class fqcn.of.javascript.interface.for.webview { +# public *; +#} diff --git a/testapps/testProjectTest/testlib/project.properties b/testapps/testProjectTest/testlib/project.properties new file mode 100644 index 000000000..01b6493a0 --- /dev/null +++ b/testapps/testProjectTest/testlib/project.properties @@ -0,0 +1,16 @@ +# This file is automatically generated by Android Tools. +# Do not modify this file -- YOUR CHANGES WILL BE ERASED! +# +# This file must be checked in Version Control Systems. +# +# To customize properties used by the Ant build system edit +# "ant.properties", and override values to adapt the script to your +# project structure. +# +# To enable ProGuard to shrink and obfuscate your code, uncomment this (available properties: sdk.dir, user.home): +#proguard.config=${sdk.dir}/tools/proguard/proguard-android.txt:proguard-project.txt + +# Project target. +target=android-15 +android.library.reference.1=../lib +manifestmerger.enabled=true diff --git a/testapps/testProjectTest/testlib/res/values/strings.xml b/testapps/testProjectTest/testlib/res/values/strings.xml new file mode 100644 index 000000000..ef424788d --- /dev/null +++ b/testapps/testProjectTest/testlib/res/values/strings.xml @@ -0,0 +1,7 @@ +<?xml version="1.0" encoding="utf-8"?> +<resources> + + <string name="hello">Hello World!</string> + <string name="app_name">TestProjectTest-testTest</string> + +</resources>
\ No newline at end of file diff --git a/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/lib/LibActivityTest.java b/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/lib/LibActivityTest.java new file mode 100644 index 000000000..6632c5810 --- /dev/null +++ b/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/lib/LibActivityTest.java @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +package com.android.tests.testprojecttest.lib; + +import android.test.ActivityInstrumentationTestCase2; +import android.test.suitebuilder.annotation.MediumTest; +import android.widget.TextView; + +import com.android.tests.testprojecttest.lib.R; + +/** + * An example of an {@link ActivityInstrumentationTestCase2} of a specific activity {@link Focus2}. + * By virtue of extending {@link ActivityInstrumentationTestCase2}, the target activity is automatically + * launched and finished before and after each test. This also extends + * {@link android.test.InstrumentationTestCase}, which provides + * access to methods for sending events to the target activity, such as key and + * touch events. See {@link #sendKeys}. + * + * In general, {@link android.test.InstrumentationTestCase}s and {@link ActivityInstrumentationTestCase2}s + * are heavier weight functional tests available for end to end testing of your + * user interface. When run via a {@link android.test.InstrumentationTestRunner}, + * the necessary {@link android.app.Instrumentation} will be injected for you to + * user via {@link #getInstrumentation} in your tests. + * + * See {@link com.example.android.apis.AllTests} for documentation on running + * all tests and individual tests in this application. + */ +public class LibActivityTest extends ActivityInstrumentationTestCase2<LibActivity> { + + private TextView mTextView; + + /** + * Creates an {@link ActivityInstrumentationTestCase2} that tests the {@link Focus2} activity. + */ + public LibActivityTest() { + super(LibActivity.class); + } + + @Override + protected void setUp() throws Exception { + super.setUp(); + final LibActivity a = getActivity(); + // ensure a valid handle to the activity has been returned + assertNotNull(a); + mTextView = (TextView) a.findViewById(R.id.text); + } + + /** + * The name 'test preconditions' is a convention to signal that if this + * test doesn't pass, the test case was not set up properly and it might + * explain any and all failures in other tests. This is not guaranteed + * to run before other tests, as junit uses reflection to find the tests. + */ + @MediumTest + public void testPreconditions() { + assertNotNull(mTextView); + } +} diff --git a/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/test/AllTests.java b/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/test/AllTests.java new file mode 100644 index 000000000..a77b53ce8 --- /dev/null +++ b/testapps/testProjectTest/testlib/src/com/android/tests/testprojecttest/test/AllTests.java @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +package com.android.tests.testprojecttest.test; + +import junit.framework.Test; +import junit.framework.TestSuite; + +import android.test.suitebuilder.TestSuiteBuilder; + +/** + * A test suite containing all tests for ApiDemos. + * + * To run all suites found in this apk: + * $ adb shell am instrument -w \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run just this suite from the command line: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.AllTests \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run an individual test case, e.g. {@link com.example.android.apis.os.MorseCodeConverterTest}: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.os.MorseCodeConverterTest \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + * + * To run an individual test, e.g. {@link com.example.android.apis.os.MorseCodeConverterTest#testCharacterS()}: + * $ adb shell am instrument -w \ + * -e class com.example.android.apis.os.MorseCodeConverterTest#testCharacterS \ + * com.example.android.apis.tests/android.test.InstrumentationTestRunner + */ +public class AllTests extends TestSuite { + + public static Test suite() { + return new TestSuiteBuilder(AllTests.class) + .includeAllPackagesUnderHere() + .build(); + } +} |