diff options
| author | andrewfish <andrewfish@6f19259b-4bc3-4df7-8a09-765794883524> | 2010-04-03 00:34:19 +0000 |
|---|---|---|
| committer | andrewfish <andrewfish@6f19259b-4bc3-4df7-8a09-765794883524> | 2010-04-03 00:34:19 +0000 |
| commit | 43263288dd20d9c9d1c1426010c7ea00a6eaeeef (patch) | |
| tree | 7aa27c5c974ceca7be20ad3d2d7cb269fce5642d /Omap35xxPkg | |
| parent | 1f44ee1077d27dbfa8765decc54856b912c8c938 (diff) | |
| download | juice-43263288dd20d9c9d1c1426010c7ea00a6eaeeef.tar.gz | |
Added DebugAgentTimerLib. Cleaned up .h files and other code.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10332 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'Omap35xxPkg')
35 files changed, 558 insertions, 308 deletions
diff --git a/Omap35xxPkg/Flash/Flash.c b/Omap35xxPkg/Flash/Flash.c index c8c34c9a4..1bd781ded 100644 --- a/Omap35xxPkg/Flash/Flash.c +++ b/Omap35xxPkg/Flash/Flash.c @@ -271,7 +271,7 @@ NandCalculateEcc ( for (Index = 0; Index < gNum512BytesChunks; Index++) { - EccResult = MmioRead32(EccResultRegister); + EccResult = MmioRead32 (EccResultRegister); //Calculate ECC code from 32-bit ECC result value. //NOTE: Following calculation is not part of TRM. We got this information diff --git a/Omap35xxPkg/Flash/Flash.h b/Omap35xxPkg/Flash/Flash.h index 2e95b96bb..a1a4349eb 100644 --- a/Omap35xxPkg/Flash/Flash.h +++ b/Omap35xxPkg/Flash/Flash.h @@ -74,10 +74,10 @@ //Nand status register bit definition #define NAND_SUCCESS (0x0UL << 0) -#define NAND_FAILURE (0x1UL << 0) +#define NAND_FAILURE BIT0 #define NAND_BUSY (0x0UL << 6) -#define NAND_READY (0x1UL << 6) +#define NAND_READY BIT6 #define NAND_RESET_STATUS (0x60UL << 0) diff --git a/Omap35xxPkg/Flash/Flash.inf b/Omap35xxPkg/Flash/Flash.inf index 31732994c..113f5c28c 100644 --- a/Omap35xxPkg/Flash/Flash.inf +++ b/Omap35xxPkg/Flash/Flash.inf @@ -42,7 +42,7 @@ gEfiCpuArchProtocolGuid [Pcd] - gOmap35xxTokenSpaceGuid.PcdBeagleGpmcOffset + gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset [depex] TRUE
\ No newline at end of file diff --git a/Omap35xxPkg/Gpio/Gpio.c b/Omap35xxPkg/Gpio/Gpio.c index 107c93916..83bbe5b11 100644 --- a/Omap35xxPkg/Gpio/Gpio.c +++ b/Omap35xxPkg/Gpio/Gpio.c @@ -43,7 +43,7 @@ Get ( DataInRegister = GpioBase(Port) + GPIO_DATAIN; - if (MmioRead32(DataInRegister) & GPIO_DATAIN_MASK(Pin)) { + if (MmioRead32 (DataInRegister) & GPIO_DATAIN_MASK(Pin)) { *Value = 1; } else { *Value = 0; diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530.h b/Omap35xxPkg/Include/Omap3530/Omap3530.h index 7d3b01132..03a726835 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530.h @@ -28,11 +28,11 @@ //CONTROL_PBIAS_LITE #define CONTROL_PBIAS_LITE 0x48002520 -#define PBIASLITEVMODE0 (0x1UL << 0) -#define PBIASLITEPWRDNZ0 (0x1UL << 1) -#define PBIASSPEEDCTRL0 (0x1UL << 2) -#define PBIASLITEVMODE1 (0x1UL << 8) -#define PBIASLITEWRDNZ1 (0x1UL << 9) +#define PBIASLITEVMODE0 BIT0 +#define PBIASLITEPWRDNZ0 BIT1 +#define PBIASSPEEDCTRL0 BIT2 +#define PBIASLITEVMODE1 BIT8 +#define PBIASLITEWRDNZ1 BIT9 #endif // __OMAP3530_H__ diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Gpio.h b/Omap35xxPkg/Include/Omap3530/Omap3530Gpio.h index 6e825a725..5fc5e9096 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Gpio.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Gpio.h @@ -50,21 +50,21 @@ #define GPIO_SYSCONFIG_IDLEMODE_MASK (3UL << 3) #define GPIO_SYSCONFIG_IDLEMODE_FORCE (0UL << 3) -#define GPIO_SYSCONFIG_IDLEMODE_NONE (1UL << 3) +#define GPIO_SYSCONFIG_IDLEMODE_NONE BIT3 #define GPIO_SYSCONFIG_IDLEMODE_SMART (2UL << 3) -#define GPIO_SYSCONFIG_ENAWAKEUP_MASK (1UL << 2) +#define GPIO_SYSCONFIG_ENAWAKEUP_MASK BIT2 #define GPIO_SYSCONFIG_ENAWAKEUP_DISABLE (0UL << 2) -#define GPIO_SYSCONFIG_ENAWAKEUP_ENABLE (1UL << 2) -#define GPIO_SYSCONFIG_SOFTRESET_MASK (1UL << 1) +#define GPIO_SYSCONFIG_ENAWAKEUP_ENABLE BIT2 +#define GPIO_SYSCONFIG_SOFTRESET_MASK BIT1 #define GPIO_SYSCONFIG_SOFTRESET_NORMAL (0UL << 1) -#define GPIO_SYSCONFIG_SOFTRESET_RESET (1UL << 1) -#define GPIO_SYSCONFIG_AUTOIDLE_MASK (1UL << 0) +#define GPIO_SYSCONFIG_SOFTRESET_RESET BIT1 +#define GPIO_SYSCONFIG_AUTOIDLE_MASK BIT0 #define GPIO_SYSCONFIG_AUTOIDLE_FREE_RUN (0UL << 0) -#define GPIO_SYSCONFIG_AUTOIDLE_ON (1UL << 0) +#define GPIO_SYSCONFIG_AUTOIDLE_ON BIT0 -#define GPIO_SYSSTATUS_RESETDONE_MASK (1UL << 0) +#define GPIO_SYSSTATUS_RESETDONE_MASK BIT0 #define GPIO_SYSSTATUS_RESETDONE_ONGOING (0UL << 0) -#define GPIO_SYSSTATUS_RESETDONE_COMPLETE (1UL << 0) +#define GPIO_SYSSTATUS_RESETDONE_COMPLETE BIT0 #define GPIO_IRQSTATUS_MASK(x) (1UL << (x)) #define GPIO_IRQSTATUS_NOT_TRIGGERED(x) (0UL << (x)) @@ -81,12 +81,12 @@ #define GPIO_CTRL_GATINGRATIO_MASK (3UL << 1) #define GPIO_CTRL_GATINGRATIO_DIV_1 (0UL << 1) -#define GPIO_CTRL_GATINGRATIO_DIV_2 (1UL << 1) +#define GPIO_CTRL_GATINGRATIO_DIV_2 BIT1 #define GPIO_CTRL_GATINGRATIO_DIV_4 (2UL << 1) #define GPIO_CTRL_GATINGRATIO_DIV_8 (3UL << 1) -#define GPIO_CTRL_DISABLEMODULE_MASK (1UL << 0) +#define GPIO_CTRL_DISABLEMODULE_MASK BIT0 #define GPIO_CTRL_DISABLEMODULE_ENABLE (0UL << 0) -#define GPIO_CTRL_DISABLEMODULE_DISABLE (1UL << 0) +#define GPIO_CTRL_DISABLEMODULE_DISABLE BIT0 #define GPIO_OE_MASK(x) (1UL << (x)) #define GPIO_OE_OUTPUT(x) (0UL << (x)) diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Gpmc.h b/Omap35xxPkg/Include/Omap3530/Omap3530Gpmc.h index 907806c37..d5a47fec6 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Gpmc.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Gpmc.h @@ -26,14 +26,14 @@ #define GPMC_IRQENABLE (GPMC_BASE + 0x1C) #define GPMC_TIMEOUT_CONTROL (GPMC_BASE + 0x40) -#define TIMEOUTENABLE (0x1UL << 0) +#define TIMEOUTENABLE BIT0 #define TIMEOUTDISABLE (0x0UL << 0) #define GPMC_ERR_ADDRESS (GPMC_BASE + 0x44) #define GPMC_ERR_TYPE (GPMC_BASE + 0x48) #define GPMC_CONFIG (GPMC_BASE + 0x50) -#define WRITEPROTECT_HIGH (0x1UL << 4) +#define WRITEPROTECT_HIGH BIT4 #define WRITEPROTECT_LOW (0x0UL << 4) #define GPMC_STATUS (GPMC_BASE + 0x54) @@ -42,7 +42,7 @@ #define DEVICETYPE_NOR (0x0UL << 10) #define DEVICETYPE_NAND (0x2UL << 10) #define DEVICESIZE_X8 (0x0UL << 12) -#define DEVICESIZE_X16 (0x1UL << 12) +#define DEVICESIZE_X16 BIT12 #define GPMC_CONFIG2_0 (GPMC_BASE + 0x64) #define CSONTIME (0x0UL << 0) @@ -54,26 +54,26 @@ #define ADVWROFFTIME (0x14UL << 16) #define GPMC_CONFIG4_0 (GPMC_BASE + 0x6C) -#define OEONTIME (0x1UL << 0) +#define OEONTIME BIT0 #define OEOFFTIME (0xFUL << 8) -#define WEONTIME (0x1UL << 16) +#define WEONTIME BIT16 #define WEOFFTIME (0xFUL << 24) #define GPMC_CONFIG5_0 (GPMC_BASE + 0x70) #define RDCYCLETIME (0x14UL << 0) #define WRCYCLETIME (0x14UL << 8) #define RDACCESSTIME (0xCUL << 16) -#define PAGEBURSTACCESSTIME (0x1UL << 24) +#define PAGEBURSTACCESSTIME BIT24 #define GPMC_CONFIG6_0 (GPMC_BASE + 0x74) -#define CYCLE2CYCLESAMECSEN (0x1UL << 7) +#define CYCLE2CYCLESAMECSEN BIT7 #define CYCLE2CYCLEDELAY (0xAUL << 8) #define WRDATAONADMUXBUS (0xFUL << 16) -#define WRACCESSTIME (0x1FUL << 24) +#define WRACCESSTIME BIT24 #define GPMC_CONFIG7_0 (GPMC_BASE + 0x78) #define BASEADDRESS (0x30UL << 0) -#define CSVALID (0x1UL << 6) +#define CSVALID BIT6 #define MASKADDRESS_128MB (0x8UL << 8) #define GPMC_NAND_COMMAND_0 (GPMC_BASE + 0x7C) @@ -81,14 +81,14 @@ #define GPMC_NAND_DATA_0 (GPMC_BASE + 0x84) #define GPMC_ECC_CONFIG (GPMC_BASE + 0x1F4) -#define ECCENABLE (0x1UL << 0) +#define ECCENABLE BIT0 #define ECCDISABLE (0x0UL << 0) #define ECCCS_0 (0x0UL << 1) -#define ECC16B (0x1UL << 7) +#define ECC16B BIT7 #define GPMC_ECC_CONTROL (GPMC_BASE + 0x1F8) -#define ECCPOINTER_REG1 (0x1UL << 0) -#define ECCCLEAR (0x1UL << 8) +#define ECCPOINTER_REG1 BIT0 +#define ECCCLEAR BIT8 #define GPMC_ECC_SIZE_CONFIG (GPMC_BASE + 0x1FC) #define ECCSIZE0_512BYTES (0xFFUL << 12) diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530I2c.h b/Omap35xxPkg/Include/Omap3530/Omap3530I2c.h index 5477b6164..1b703e085 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530I2c.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530I2c.h @@ -19,17 +19,17 @@ #define I2C1BASE 0x48070000 #define I2C_IE (I2C1BASE + 0x4) -#define XRDY_IE (0x1UL << 4) -#define RRDY_IE (0x1UL << 3) -#define ARDY_IE (0x1UL << 2) -#define NACK_IE (0x1UL << 1) +#define XRDY_IE BIT4 +#define RRDY_IE BIT3 +#define ARDY_IE BIT2 +#define NACK_IE BIT1 #define I2C_STAT (I2C1BASE + 0x8) -#define BB (0x1UL << 12) -#define XRDY (0x1UL << 4) -#define RRDY (0x1UL << 3) -#define ARDY (0x1UL << 2) -#define NACK (0x1UL << 1) +#define BB BIT12 +#define XRDY BIT4 +#define RRDY BIT3 +#define ARDY BIT2 +#define NACK BIT1 #define I2C_WE (I2C1BASE + 0xC) #define I2C_SYSS (I2C1BASE + 0x10) @@ -39,12 +39,12 @@ #define I2C_SYSC (I2C1BASE + 0x20) #define I2C_CON (I2C1BASE + 0x24) -#define STT (0x1UL << 0) -#define STP (0x1UL << 1) -#define XSA (0x1UL << 8) -#define TRX (0x1UL << 9) -#define MST (0x1UL << 10) -#define I2C_EN (0x1UL << 15) +#define STT BIT0 +#define STP BIT1 +#define XSA BIT8 +#define TRX BIT9 +#define MST BIT10 +#define I2C_EN BIT15 #define I2C_OA0 (I2C1BASE + 0x28) #define I2C_SA (I2C1BASE + 0x2C) diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Interrupt.h b/Omap35xxPkg/Include/Omap3530/Omap3530Interrupt.h index 129d8c046..23b99454c 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Interrupt.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Interrupt.h @@ -40,7 +40,8 @@ #define INTCPS_ILR(m) (INTERRUPT_BASE + 0x0100 + (0x04 * (m))) #define INTCPS_SIR_IRQ_MASK (0x7F) -#define INTCPS_CONTROL_NEWIRQAGR (1UL << 0) +#define INTCPS_CONTROL_NEWIRQAGR BIT0 +#define INTCPS_CONTROL_NEWFIQAGR BIT1 #endif // __OMAP3530INTERRUPT_H__ diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530MMCHS.h b/Omap35xxPkg/Include/Omap3530/Omap3530MMCHS.h index 5ade84380..ff2e1e880 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530MMCHS.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530MMCHS.h @@ -20,31 +20,31 @@ #define MMC_REFERENCE_CLK (96000000) #define MMCHS_SYSCONFIG (MMCHS1BASE + 0x10) -#define SOFTRESET (0x1UL << 1) -#define ENAWAKEUP (0x1UL << 2) +#define SOFTRESET BIT1 +#define ENAWAKEUP BIT2 #define MMCHS_SYSSTATUS (MMCHS1BASE + 0x14) -#define RESETDONE_MASK (0x1UL << 0) -#define RESETDONE (0x1UL << 0) +#define RESETDONE_MASK BIT0 +#define RESETDONE BIT0 #define MMCHS_CSRE (MMCHS1BASE + 0x24) #define MMCHS_SYSTEST (MMCHS1BASE + 0x28) #define MMCHS_CON (MMCHS1BASE + 0x2C) -#define OD (0x1UL << 0) +#define OD BIT0 #define NOINIT (0x0UL << 1) -#define INIT (0x1UL << 1) -#define HR (0x1UL << 2) -#define STR (0x1UL << 3) -#define MODE (0x1UL << 4) +#define INIT BIT1 +#define HR BIT2 +#define STR BIT3 +#define MODE BIT4 #define DW8_1_4_BIT (0x0UL << 5) -#define DW8_8_BIT (0x1UL << 5) -#define MIT (0x1UL << 6) -#define CDP (0x1UL << 7) -#define WPP (0x1UL << 8) -#define CTPL (0x1UL << 11) +#define DW8_8_BIT BIT5 +#define MIT BIT6 +#define CDP BIT7 +#define WPP BIT8 +#define CTPL BIT11 #define CEATA_OFF (0x0UL << 12) -#define CEATA_ON (0x1UL << 12) +#define CEATA_ON BIT12 #define MMCHS_PWCNT (MMCHS1BASE + 0x30) @@ -54,19 +54,19 @@ #define MMCHS_ARG (MMCHS1BASE + 0x108) #define MMCHS_CMD (MMCHS1BASE + 0x10C) -#define DE_ENABLE (0x1UL << 0) -#define BCE_ENABLE (0x1UL << 1) -#define ACEN_ENABLE (0x1UL << 2) -#define DDIR_READ (0x1UL << 4) +#define DE_ENABLE BIT0 +#define BCE_ENABLE BIT1 +#define ACEN_ENABLE BIT2 +#define DDIR_READ BIT4 #define DDIR_WRITE (0x0UL << 4) #define MSBS_SGLEBLK (0x0UL << 5) -#define MSBS_MULTBLK (0x1UL << 5) +#define MSBS_MULTBLK BIT5 #define RSP_TYPE_MASK (0x3UL << 16) -#define RSP_TYPE_136BITS (0x1UL << 16) +#define RSP_TYPE_136BITS BIT16 #define RSP_TYPE_48BITS (0x2UL << 16) -#define CCCE_ENABLE (0x1UL << 19) -#define CICE_ENABLE (0x1UL << 20) -#define DP_ENABLE (0x1UL << 21) +#define CCCE_ENABLE BIT19 +#define CICE_ENABLE BIT20 +#define DP_ENABLE BIT21 #define INDX(CMD_INDX) ((CMD_INDX & 0x3F) << 24) #define MMCHS_RSP10 (MMCHS1BASE + 0x110) @@ -76,84 +76,84 @@ #define MMCHS_DATA (MMCHS1BASE + 0x120) #define MMCHS_PSTATE (MMCHS1BASE + 0x124) -#define CMDI_MASK (0x1UL << 0) +#define CMDI_MASK BIT0 #define CMDI_ALLOWED (0x0UL << 0) -#define CMDI_NOT_ALLOWED (0x1UL << 0) -#define DATI_MASK (0x1UL << 1) +#define CMDI_NOT_ALLOWED BIT0 +#define DATI_MASK BIT1 #define DATI_ALLOWED (0x0UL << 1) -#define DATI_NOT_ALLOWED (0x1UL << 1) +#define DATI_NOT_ALLOWED BIT1 #define MMCHS_HCTL (MMCHS1BASE + 0x128) #define DTW_1_BIT (0x0UL << 1) -#define DTW_4_BIT (0x1UL << 1) -#define SDBP_MASK (0x1UL << 8) +#define DTW_4_BIT BIT1 +#define SDBP_MASK BIT8 #define SDBP_OFF (0x0UL << 8) -#define SDBP_ON (0x1UL << 8) +#define SDBP_ON BIT8 #define SDVS_1_8_V (0x5UL << 9) #define SDVS_3_0_V (0x6UL << 9) -#define IWE (0x1UL << 24) +#define IWE BIT24 #define MMCHS_SYSCTL (MMCHS1BASE + 0x12C) -#define ICE (0x1UL << 0) -#define ICS_MASK (0x1UL << 1) -#define ICS (0x1UL << 1) -#define CEN (0x1UL << 2) +#define ICE BIT0 +#define ICS_MASK BIT1 +#define ICS BIT1 +#define CEN BIT2 #define CLKD_MASK (0x3FFUL << 6) #define CLKD_80KHZ (0x258UL) //(96*1000/80)/2 #define CLKD_400KHZ (0xF0UL) #define DTO_MASK (0xFUL << 16) #define DTO_VAL (0xEUL << 16) -#define SRA (0x1UL << 24) -#define SRC_MASK (0x1UL << 25) -#define SRC (0x1UL << 25) -#define SRD (0x1UL << 26) +#define SRA BIT24 +#define SRC_MASK BIT25 +#define SRC BIT25 +#define SRD BIT26 #define MMCHS_STAT (MMCHS1BASE + 0x130) -#define CC (0x1UL << 0) -#define TC (0x1UL << 1) -#define BWR (0x1UL << 4) -#define BRR (0x1UL << 5) -#define ERRI (0x1UL << 15) -#define CTO (0x1UL << 16) -#define DTO (0x1UL << 20) -#define DCRC (0x1UL << 21) -#define DEB (0x1UL << 22) +#define CC BIT0 +#define TC BIT1 +#define BWR BIT4 +#define BRR BIT5 +#define ERRI BIT15 +#define CTO BIT16 +#define DTO BIT20 +#define DCRC BIT21 +#define DEB BIT22 #define MMCHS_IE (MMCHS1BASE + 0x134) -#define CC_EN (0x1UL << 0) -#define TC_EN (0x1UL << 1) -#define BWR_EN (0x1UL << 4) -#define BRR_EN (0x1UL << 5) -#define CTO_EN (0x1UL << 16) -#define CCRC_EN (0x1UL << 17) -#define CEB_EN (0x1UL << 18) -#define CIE_EN (0x1UL << 19) -#define DTO_EN (0x1UL << 20) -#define DCRC_EN (0x1UL << 21) -#define DEB_EN (0x1UL << 22) -#define CERR_EN (0x1UL << 28) -#define BADA_EN (0x1UL << 29) +#define CC_EN BIT0 +#define TC_EN BIT1 +#define BWR_EN BIT4 +#define BRR_EN BIT5 +#define CTO_EN BIT16 +#define CCRC_EN BIT17 +#define CEB_EN BIT18 +#define CIE_EN BIT19 +#define DTO_EN BIT20 +#define DCRC_EN BIT21 +#define DEB_EN BIT22 +#define CERR_EN BIT28 +#define BADA_EN BIT29 #define MMCHS_ISE (MMCHS1BASE + 0x138) -#define CC_SIGEN (0x1UL << 0) -#define TC_SIGEN (0x1UL << 1) -#define BWR_SIGEN (0x1UL << 4) -#define BRR_SIGEN (0x1UL << 5) -#define CTO_SIGEN (0x1UL << 16) -#define CCRC_SIGEN (0x1UL << 17) -#define CEB_SIGEN (0x1UL << 18) -#define CIE_SIGEN (0x1UL << 19) -#define DTO_SIGEN (0x1UL << 20) -#define DCRC_SIGEN (0x1UL << 21) -#define DEB_SIGEN (0x1UL << 22) -#define CERR_SIGEN (0x1UL << 28) -#define BADA_SIGEN (0x1UL << 29) +#define CC_SIGEN BIT0 +#define TC_SIGEN BIT1 +#define BWR_SIGEN BIT4 +#define BRR_SIGEN BIT5 +#define CTO_SIGEN BIT16 +#define CCRC_SIGEN BIT17 +#define CEB_SIGEN BIT18 +#define CIE_SIGEN BIT19 +#define DTO_SIGEN BIT20 +#define DCRC_SIGEN BIT21 +#define DEB_SIGEN BIT22 +#define CERR_SIGEN BIT28 +#define BADA_SIGEN BIT29 #define MMCHS_AC12 (MMCHS1BASE + 0x13C) #define MMCHS_CAPA (MMCHS1BASE + 0x140) -#define VS30 (0x1UL << 25) -#define VS18 (0x1UL << 26) +#define VS30 BIT25 +#define VS18 BIT26 #define MMCHS_CUR_CAPA (MMCHS1BASE + 0x148) #define MMCHS_REV (MMCHS1BASE + 0x1FC) @@ -179,7 +179,7 @@ #define CMD8 (INDX(8) | CICE_ENABLE | CCCE_ENABLE | RSP_TYPE_48BITS) #define CMD8_INT_EN (CERR_EN | CIE_EN | CCRC_EN | CC_EN | CEB_EN | CTO_EN) //Reserved(0)[12:31], Supply voltage(1)[11:8], check pattern(0xCE)[7:0] = 0x1CE -#define CMD8_ARG (0x0UL << 12 | 0x1UL << 8 | 0xCEUL << 0) +#define CMD8_ARG (0x0UL << 12 | BIT8 | 0xCEUL << 0) #define CMD9 (INDX(9) | CCCE_ENABLE | RSP_TYPE_136BITS) #define CMD9_INT_EN (CCRC_EN | CC_EN | CEB_EN | CTO_EN) diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530PadConfiguration.h b/Omap35xxPkg/Include/Omap3530/Omap3530PadConfiguration.h index baae8c68c..49a6f2213 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530PadConfiguration.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530PadConfiguration.h @@ -281,9 +281,9 @@ #define WAKEUP_MASK (0x2UL << WAKEUP_OFFSET) #define PULLUDDISABLE (0x0UL << 0) -#define PULLUDENABLE (0x1UL << 0) +#define PULLUDENABLE BIT0 #define PULLTYPENOSELECT (0x0UL << 1) -#define PULLTYPESELECT (0x1UL << 1) +#define PULLTYPESELECT BIT1 #define OUTPUT (0x0UL) //Pin is configured in output only mode. #define INPUT (0x1UL) //Pin is configured in bi-directional mode. diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Prcm.h b/Omap35xxPkg/Include/Omap3530/Omap3530Prcm.h index e85bb9317..5d842639f 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Prcm.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Prcm.h @@ -40,29 +40,29 @@ #define PRM_RSTST (0x48307258) //CORE clock -#define CM_FCLKEN1_CORE_EN_I2C1_MASK (1UL << 15) +#define CM_FCLKEN1_CORE_EN_I2C1_MASK BIT15 #define CM_FCLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15) -#define CM_FCLKEN1_CORE_EN_I2C1_ENABLE (1UL << 15) +#define CM_FCLKEN1_CORE_EN_I2C1_ENABLE BIT15 -#define CM_ICLKEN1_CORE_EN_I2C1_MASK (1UL << 15) +#define CM_ICLKEN1_CORE_EN_I2C1_MASK BIT15 #define CM_ICLKEN1_CORE_EN_I2C1_DISABLE (0UL << 15) -#define CM_ICLKEN1_CORE_EN_I2C1_ENABLE (1UL << 15) +#define CM_ICLKEN1_CORE_EN_I2C1_ENABLE BIT15 -#define CM_FCLKEN1_CORE_EN_MMC1_MASK (1UL << 24) +#define CM_FCLKEN1_CORE_EN_MMC1_MASK BIT24 #define CM_FCLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24) -#define CM_FCLKEN1_CORE_EN_MMC1_ENABLE (1UL << 24) +#define CM_FCLKEN1_CORE_EN_MMC1_ENABLE BIT24 -#define CM_FCLKEN3_CORE_EN_USBTLL_MASK (1UL << 2) +#define CM_FCLKEN3_CORE_EN_USBTLL_MASK BIT2 #define CM_FCLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2) -#define CM_FCLKEN3_CORE_EN_USBTLL_ENABLE (1UL << 2) +#define CM_FCLKEN3_CORE_EN_USBTLL_ENABLE BIT2 -#define CM_ICLKEN1_CORE_EN_MMC1_MASK (1UL << 24) +#define CM_ICLKEN1_CORE_EN_MMC1_MASK BIT24 #define CM_ICLKEN1_CORE_EN_MMC1_DISABLE (0UL << 24) -#define CM_ICLKEN1_CORE_EN_MMC1_ENABLE (1UL << 24) +#define CM_ICLKEN1_CORE_EN_MMC1_ENABLE BIT24 -#define CM_ICLKEN3_CORE_EN_USBTLL_MASK (1UL << 2) +#define CM_ICLKEN3_CORE_EN_USBTLL_MASK BIT2 #define CM_ICLKEN3_CORE_EN_USBTLL_DISABLE (0UL << 2) -#define CM_ICLKEN3_CORE_EN_USBTLL_ENABLE (1UL << 2) +#define CM_ICLKEN3_CORE_EN_USBTLL_ENABLE BIT2 #define CM_CLKEN_FREQSEL_075_100 (0x03UL << 4) #define CM_CLKEN_ENABLE (7UL << 0) @@ -72,93 +72,93 @@ #define CM_CLKSEL_DIV_120M(x) (((x) & 0x1F) << 0) -#define CM_FCLKEN_USBHOST_EN_USBHOST2_MASK (1UL << 1) +#define CM_FCLKEN_USBHOST_EN_USBHOST2_MASK BIT1 #define CM_FCLKEN_USBHOST_EN_USBHOST2_DISABLE (0UL << 1) -#define CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE (1UL << 1) +#define CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE BIT1 -#define CM_FCLKEN_USBHOST_EN_USBHOST1_MASK (1UL << 0) +#define CM_FCLKEN_USBHOST_EN_USBHOST1_MASK BIT0 #define CM_FCLKEN_USBHOST_EN_USBHOST1_DISABLE (0UL << 0) -#define CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE (1UL << 0) +#define CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE BIT0 -#define CM_ICLKEN_USBHOST_EN_USBHOST_MASK (1UL << 0) +#define CM_ICLKEN_USBHOST_EN_USBHOST_MASK BIT0 #define CM_ICLKEN_USBHOST_EN_USBHOST_DISABLE (0UL << 0) -#define CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE (1UL << 0) +#define CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE BIT0 //Wakeup functional clock #define CM_FCLKEN_WKUP_EN_GPIO1_DISABLE (0UL << 3) -#define CM_FCLKEN_WKUP_EN_GPIO1_ENABLE (1UL << 3) +#define CM_FCLKEN_WKUP_EN_GPIO1_ENABLE BIT3 #define CM_FCLKEN_WKUP_EN_WDT2_DISABLE (0UL << 5) -#define CM_FCLKEN_WKUP_EN_WDT2_ENABLE (1UL << 5) +#define CM_FCLKEN_WKUP_EN_WDT2_ENABLE BIT5 //Wakeup interface clock #define CM_ICLKEN_WKUP_EN_GPIO1_DISABLE (0UL << 3) -#define CM_ICLKEN_WKUP_EN_GPIO1_ENABLE (1UL << 3) +#define CM_ICLKEN_WKUP_EN_GPIO1_ENABLE BIT3 #define CM_ICLKEN_WKUP_EN_WDT2_DISABLE (0UL << 5) -#define CM_ICLKEN_WKUP_EN_WDT2_ENABLE (1UL << 5) +#define CM_ICLKEN_WKUP_EN_WDT2_ENABLE BIT5 //Peripheral functional clock #define CM_FCLKEN_PER_EN_GPT3_DISABLE (0UL << 4) -#define CM_FCLKEN_PER_EN_GPT3_ENABLE (1UL << 4) +#define CM_FCLKEN_PER_EN_GPT3_ENABLE BIT4 #define CM_FCLKEN_PER_EN_GPT4_DISABLE (0UL << 5) -#define CM_FCLKEN_PER_EN_GPT4_ENABLE (1UL << 5) +#define CM_FCLKEN_PER_EN_GPT4_ENABLE BIT5 #define CM_FCLKEN_PER_EN_UART3_DISABLE (0UL << 11) -#define CM_FCLKEN_PER_EN_UART3_ENABLE (1UL << 11) +#define CM_FCLKEN_PER_EN_UART3_ENABLE BIT11 #define CM_FCLKEN_PER_EN_GPIO2_DISABLE (0UL << 13) -#define CM_FCLKEN_PER_EN_GPIO2_ENABLE (1UL << 13) +#define CM_FCLKEN_PER_EN_GPIO2_ENABLE BIT13 #define CM_FCLKEN_PER_EN_GPIO3_DISABLE (0UL << 14) -#define CM_FCLKEN_PER_EN_GPIO3_ENABLE (1UL << 14) +#define CM_FCLKEN_PER_EN_GPIO3_ENABLE BIT14 #define CM_FCLKEN_PER_EN_GPIO4_DISABLE (0UL << 15) -#define CM_FCLKEN_PER_EN_GPIO4_ENABLE (1UL << 15) +#define CM_FCLKEN_PER_EN_GPIO4_ENABLE BIT15 #define CM_FCLKEN_PER_EN_GPIO5_DISABLE (0UL << 16) -#define CM_FCLKEN_PER_EN_GPIO5_ENABLE (1UL << 16) +#define CM_FCLKEN_PER_EN_GPIO5_ENABLE BIT16 #define CM_FCLKEN_PER_EN_GPIO6_DISABLE (0UL << 17) -#define CM_FCLKEN_PER_EN_GPIO6_ENABLE (1UL << 17) +#define CM_FCLKEN_PER_EN_GPIO6_ENABLE BIT17 //Peripheral interface clock #define CM_ICLKEN_PER_EN_GPT3_DISABLE (0UL << 4) -#define CM_ICLKEN_PER_EN_GPT3_ENABLE (1UL << 4) +#define CM_ICLKEN_PER_EN_GPT3_ENABLE BIT4 #define CM_ICLKEN_PER_EN_GPT4_DISABLE (0UL << 5) -#define CM_ICLKEN_PER_EN_GPT4_ENABLE (1UL << 5) +#define CM_ICLKEN_PER_EN_GPT4_ENABLE BIT5 #define CM_ICLKEN_PER_EN_UART3_DISABLE (0UL << 11) -#define CM_ICLKEN_PER_EN_UART3_ENABLE (1UL << 11) +#define CM_ICLKEN_PER_EN_UART3_ENABLE BIT11 #define CM_ICLKEN_PER_EN_GPIO2_DISABLE (0UL << 13) -#define CM_ICLKEN_PER_EN_GPIO2_ENABLE (1UL << 13) +#define CM_ICLKEN_PER_EN_GPIO2_ENABLE BIT13 #define CM_ICLKEN_PER_EN_GPIO3_DISABLE (0UL << 14) -#define CM_ICLKEN_PER_EN_GPIO3_ENABLE (1UL << 14) +#define CM_ICLKEN_PER_EN_GPIO3_ENABLE BIT14 #define CM_ICLKEN_PER_EN_GPIO4_DISABLE (0UL << 15) -#define CM_ICLKEN_PER_EN_GPIO4_ENABLE (1UL << 15) +#define CM_ICLKEN_PER_EN_GPIO4_ENABLE BIT15 #define CM_ICLKEN_PER_EN_GPIO5_DISABLE (0UL << 16) -#define CM_ICLKEN_PER_EN_GPIO5_ENABLE (1UL << 16) +#define CM_ICLKEN_PER_EN_GPIO5_ENABLE BIT16 #define CM_ICLKEN_PER_EN_GPIO6_DISABLE (0UL << 17) -#define CM_ICLKEN_PER_EN_GPIO6_ENABLE (1UL << 17) +#define CM_ICLKEN_PER_EN_GPIO6_ENABLE BIT17 //Timer source clock selection #define CM_CLKSEL_PER_CLKSEL_GPT3_32K (0UL << 1) -#define CM_CLKSEL_PER_CLKSEL_GPT3_SYS (1UL << 1) +#define CM_CLKSEL_PER_CLKSEL_GPT3_SYS BIT1 #define CM_CLKSEL_PER_CLKSEL_GPT4_32K (0UL << 2) -#define CM_CLKSEL_PER_CLKSEL_GPT4_SYS (1UL << 2) +#define CM_CLKSEL_PER_CLKSEL_GPT4_SYS BIT2 //Reset management (Global and Cold reset) -#define RST_GS (0x1UL << 1) -#define RST_DPLL3 (0x1UL << 2) -#define GLOBAL_SW_RST (0x1UL << 1) +#define RST_GS BIT1 +#define RST_DPLL3 BIT2 +#define GLOBAL_SW_RST BIT1 #define GLOBAL_COLD_RST (0x0UL << 0) #endif // __OMAP3530PRCM_H__ diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Timer.h b/Omap35xxPkg/Include/Omap3530/Omap3530Timer.h index 1c43b3ee3..1f998b404 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Timer.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Timer.h @@ -51,9 +51,9 @@ #define WSPR (0x048) -#define TISR_TCAR_IT_FLAG_MASK (1UL << 2) -#define TISR_OVF_IT_FLAG_MASK (1UL << 1) -#define TISR_MAT_IT_FLAG_MASK (1UL << 0) +#define TISR_TCAR_IT_FLAG_MASK BIT2 +#define TISR_OVF_IT_FLAG_MASK BIT1 +#define TISR_MAT_IT_FLAG_MASK BIT0 #define TISR_ALL_INTERRUPT_MASK (TISR_TCAR_IT_FLAG_MASK | TISR_OVF_IT_FLAG_MASK | TISR_MAT_IT_FLAG_MASK) #define TISR_TCAR_IT_FLAG_NOT_PENDING (0UL << 2) @@ -61,21 +61,21 @@ #define TISR_MAT_IT_FLAG_NOT_PENDING (0UL << 0) #define TISR_NO_INTERRUPTS_PENDING (TISR_TCAR_IT_FLAG_NOT_PENDING | TISR_OVF_IT_FLAG_NOT_PENDING | TISR_MAT_IT_FLAG_NOT_PENDING) -#define TISR_TCAR_IT_FLAG_CLEAR (1UL << 2) -#define TISR_OVF_IT_FLAG_CLEAR (1UL << 1) -#define TISR_MAT_IT_FLAG_CLEAR (1UL << 0) +#define TISR_TCAR_IT_FLAG_CLEAR BIT2 +#define TISR_OVF_IT_FLAG_CLEAR BIT1 +#define TISR_MAT_IT_FLAG_CLEAR BIT0 #define TISR_CLEAR_ALL (TISR_TCAR_IT_FLAG_CLEAR | TISR_OVF_IT_FLAG_CLEAR | TISR_MAT_IT_FLAG_CLEAR) -#define TCLR_AR_AUTORELOAD (1UL << 1) +#define TCLR_AR_AUTORELOAD BIT1 #define TCLR_AR_ONESHOT (0UL << 1) -#define TCLR_ST_ON (1UL << 0) +#define TCLR_ST_ON BIT0 #define TCLR_ST_OFF (0UL << 0) -#define TIER_TCAR_IT_ENABLE (1UL << 2) +#define TIER_TCAR_IT_ENABLE (BIT2 #define TIER_TCAR_IT_DISABLE (0UL << 2) -#define TIER_OVF_IT_ENABLE (1UL << 1) +#define TIER_OVF_IT_ENABLE BIT1 #define TIER_OVF_IT_DISABLE (0UL << 1) -#define TIER_MAT_IT_ENABLE (1UL << 0) +#define TIER_MAT_IT_ENABLE BIT0 #define TIER_MAT_IT_DISABLE (0UL << 0) #endif // __OMAP3530TIMER_H__ diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Uart.h b/Omap35xxPkg/Include/Omap3530/Omap3530Uart.h index aef1c4bab..8d27ebb80 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Uart.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Uart.h @@ -29,25 +29,26 @@ #define UART_LSR_REG (0x0014)
#define UART_MDR1_REG (0x0020)
-#define UART_FCR_TX_FIFO_CLEAR (1UL << 3)
-#define UART_FCR_RX_FIFO_CLEAR (1UL << 3)
-#define UART_FCR_FIFO_ENABLE (1UL << 3)
+#define UART_FCR_TX_FIFO_CLEAR BIT2
+#define UART_FCR_RX_FIFO_CLEAR BIT1
+#define UART_FCR_FIFO_ENABLE BIT0
-#define UART_LCR_DIV_EN_ENABLE (1UL << 7)
+#define UART_LCR_DIV_EN_ENABLE BIT7
#define UART_LCR_DIV_EN_DISABLE (0UL << 7)
-#define UART_LCR_CHAR_LENGTH_8 (3UL << 0)
+#define UART_LCR_CHAR_LENGTH_8 (BIT1 | BIT0)
-#define UART_MCR_RTS_FORCE_ACTIVE (1UL << 1)
-#define UART_MCR_DTR_FORCE_ACTIVE (1UL << 0)
+#define UART_MCR_RTS_FORCE_ACTIVE BIT1
+#define UART_MCR_DTR_FORCE_ACTIVE BIT0
-#define UART_LSR_TX_FIFO_E_MASK (1UL << 5)
+#define UART_LSR_TX_FIFO_E_MASK BIT5
#define UART_LSR_TX_FIFO_E_NOT_EMPTY (0UL << 5)
-#define UART_LSR_TX_FIFO_E_EMPTY (1UL << 5)
-#define UART_LSR_RX_FIFO_E_MASK (1UL << 0)
-#define UART_LSR_RX_FIFO_E_NOT_EMPTY (1UL << 0)
+#define UART_LSR_TX_FIFO_E_EMPTY BIT5
+#define UART_LSR_RX_FIFO_E_MASK BIT0
+#define UART_LSR_RX_FIFO_E_NOT_EMPTY BIT0
#define UART_LSR_RX_FIFO_E_EMPTY (0UL << 0)
-#define UART_MDR1_MODE_SELECT_DISABLE (7UL << 0)
-#define UART_MDR1_MODE_SELECT_UART_16X (0UL << 0)
+// BIT2:BIT0
+#define UART_MDR1_MODE_SELECT_DISABLE (7UL)
+#define UART_MDR1_MODE_SELECT_UART_16X (0UL)
#endif // __OMAP3530UART_H__
diff --git a/Omap35xxPkg/Include/Omap3530/Omap3530Usb.h b/Omap35xxPkg/Include/Omap3530/Omap3530Usb.h index 047740dcb..5e938b65c 100644 --- a/Omap35xxPkg/Include/Omap3530/Omap3530Usb.h +++ b/Omap35xxPkg/Include/Omap3530/Omap3530Usb.h @@ -23,20 +23,25 @@ #define USB_EHCI_HCCAPBASE (USB_BASE + 0x4800) -#define UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY (1UL << 12) -#define UHH_SYSCONFIG_CLOCKACTIVITY_ON (1UL << 8) -#define UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY (1UL << 3) -#define UHH_SYSCONFIG_ENAWAKEUP_ENABLE (1UL << 2) -#define UHH_SYSCONFIG_SOFTRESET (1UL << 1) +#define UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY BIT12 +#define UHH_SYSCONFIG_CLOCKACTIVITY_ON BIT8 +#define UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY BIT3 +#define UHH_SYSCONFIG_ENAWAKEUP_ENABLE BIT2 +#define UHH_SYSCONFIG_SOFTRESET BIT1 #define UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN (0UL << 0) -#define UHH_HOSTCONFIG_ENA_INCR16_ENABLE (1UL << 4) -#define UHH_HOSTCONFIG_ENA_INCR8_ENABLE (1UL << 3) -#define UHH_HOSTCONFIG_ENA_INCR4_ENABLE (1UL << 2) +#define UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT (0UL << 10)
+#define UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT (0UL << 9)
+#define UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT (0UL << 8)
+#define UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE (0UL << 5)
+#define UHH_HOSTCONFIG_ENA_INCR16_ENABLE BIT4 +#define UHH_HOSTCONFIG_ENA_INCR8_ENABLE BIT3 +#define UHH_HOSTCONFIG_ENA_INCR4_ENABLE BIT2 +#define UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON (0UL << 1)
+#define UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE (0UL << 0) #define UHH_SYSSTATUS_RESETDONE (BIT0 | BIT1 | BIT2) - #endif // __OMAP3530USB_H__ diff --git a/Omap35xxPkg/Include/TPS65950.h b/Omap35xxPkg/Include/TPS65950.h index 4b6909921..618fbf91d 100644 --- a/Omap35xxPkg/Include/TPS65950.h +++ b/Omap35xxPkg/Include/TPS65950.h @@ -28,7 +28,7 @@ //MMC definitions. #define VMMC1_DEV_GRP 0x82 -#define DEV_GRP_P1 (0x01UL << 5) +#define DEV_GRP_P1 BIT5 #define VMMC1_DEDICATED_REG 0x85 #define VSEL_1_85V 0x0 @@ -38,9 +38,9 @@ //LEDEN register #define LEDEN 0xEE -#define LEDAON (0x1UL << 0) -#define LEDBON (0x1UL << 1) -#define LEDAPWM (0x1UL << 4) -#define LEDBPWM (0x1UL << 5) +#define LEDAON BIT0 +#define LEDBON BIT1 +#define LEDAPWM BIT4 +#define LEDBPWM BIT5 #endif //__TPS65950_H__ diff --git a/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c b/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c index 55e137361..72135c245 100644 --- a/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c +++ b/Omap35xxPkg/InterruptDxe/HardwareInterrupt.c @@ -59,6 +59,8 @@ ExitBootServicesEvent ( MmioWrite32 (INTCPS_MIR(1), 0xFFFFFFFF);
MmioWrite32 (INTCPS_MIR(2), 0xFFFFFFFF);
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWIRQAGR);
+
+ // Add code here to disable all FIQs as debugger may have turned one on
}
/**
@@ -201,7 +203,7 @@ GetInterruptSourceState ( Bank = Source / 32;
Bit = 1UL << (Source % 32);
- if ((MmioRead32(INTCPS_MIR(Bank)) & Bit) == Bit) {
+ if ((MmioRead32 (INTCPS_MIR(Bank)) & Bit) == Bit) {
*InterruptState = FALSE;
} else {
*InterruptState = TRUE;
diff --git a/Omap35xxPkg/Library/BeagleBoardSystemLib/BeagleBoardSystemLib.c b/Omap35xxPkg/Library/BeagleBoardSystemLib/BeagleBoardSystemLib.c index a03ef575f..f8d7b97ca 100644 --- a/Omap35xxPkg/Library/BeagleBoardSystemLib/BeagleBoardSystemLib.c +++ b/Omap35xxPkg/Library/BeagleBoardSystemLib/BeagleBoardSystemLib.c @@ -39,8 +39,8 @@ ResetSystem ( case EfiResetShutdown: default: //Perform cold reset of the system. - MmioOr32(PRM_RSTCTRL, RST_DPLL3); - while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1); + MmioOr32 (PRM_RSTCTRL, RST_DPLL3); + while ((MmioRead32 (PRM_RSTST) & GLOBAL_COLD_RST) != 0x1); break; } diff --git a/Omap35xxPkg/Library/BeagleBoardTimerLib/BeagleBoardTimerLib.inf b/Omap35xxPkg/Library/BeagleBoardTimerLib/BeagleBoardTimerLib.inf index 7930f9382..515dff9f6 100644 --- a/Omap35xxPkg/Library/BeagleBoardTimerLib/BeagleBoardTimerLib.inf +++ b/Omap35xxPkg/Library/BeagleBoardTimerLib/BeagleBoardTimerLib.inf @@ -41,5 +41,5 @@ [Pcd]
gEmbeddedTokenSpaceGuid.PcdEmbeddedPerformanceCounterFreqencyInHz
gEmbeddedTokenSpaceGuid.PcdEmbeddedFdPerformanceCounterPeriodInNanoseconds
- gOmap35xxTokenSpaceGuid.PcdBeagleFreeTimer
+ gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer
diff --git a/Omap35xxPkg/Library/BeagleBoardTimerLib/TimerLib.c b/Omap35xxPkg/Library/BeagleBoardTimerLib/TimerLib.c index 1b9a5bac4..1b1f2a9db 100644 --- a/Omap35xxPkg/Library/BeagleBoardTimerLib/TimerLib.c +++ b/Omap35xxPkg/Library/BeagleBoardTimerLib/TimerLib.c @@ -57,13 +57,13 @@ NanoSecondDelay ( Delay = (NanoSeconds / PcdGet32(PcdEmbeddedFdPerformanceCounterPeriodInNanoseconds)) + 1;
- TimerCountRegister = TimerBase(PcdGet32(PcdBeagleFreeTimer)) + GPTIMER_TCRR;
+ TimerCountRegister = TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR;
- StartTime = MmioRead32(TimerCountRegister);
+ StartTime = MmioRead32 (TimerCountRegister);
do
{
- CurrentTime = MmioRead32(TimerCountRegister);
+ CurrentTime = MmioRead32 (TimerCountRegister);
ElapsedTime = CurrentTime - StartTime;
} while (ElapsedTime < Delay);
@@ -78,7 +78,7 @@ GetPerformanceCounter ( VOID
)
{
- return (UINT64)MmioRead32(TimerBase(PcdGet32(PcdBeagleFreeTimer)) + GPTIMER_TCRR);
+ return (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TCRR);
}
UINT64
@@ -90,7 +90,7 @@ GetPerformanceCounterProperties ( {
if (StartValue != NULL) {
// Timer starts with the reload value
- *StartValue = (UINT64)MmioRead32(TimerBase(PcdGet32(PcdBeagleFreeTimer)) + GPTIMER_TLDR);
+ *StartValue = (UINT64)MmioRead32 (TimerBase(PcdGet32(PcdOmap35xxFreeTimer)) + GPTIMER_TLDR);
}
if (EndValue != NULL) {
diff --git a/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.c b/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.c new file mode 100755 index 000000000..72b860361 --- /dev/null +++ b/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.c @@ -0,0 +1,158 @@ +/** @file
+ Debug Agent timer lib for OMAP 35xx.
+
+ Copyright (c) 2008-2010, Apple Inc. All rights reserved.
+
+ All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <Base.h>
+#include <Library/BaseLib.h> +#include <Library/IoLib.h> +#include <Library/OmapLib.h> +#include <Library/ArmLib.h>
+#include <Library/PcdLib.h> +
+#include <Omap3530/Omap3530.h> +
+
+volatile UINT32 gVector;
+ +// Cached registers +volatile UINT32 gTISR; +volatile UINT32 gTCLR; +volatile UINT32 gTLDR; +volatile UINT32 gTCRR; +volatile UINT32 gTIER; +
+VOID
+EnableInterruptSource (
+ VOID
+ )
+{
+ UINTN Bank;
+ UINTN Bit;
+
+ // Map vector to FIQ, IRQ is default
+ MmioWrite32 (INTCPS_ILR (gVector), 1);
+
+ Bank = gVector / 32;
+ Bit = 1UL << (gVector % 32);
+
+ MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit);
+}
+
+VOID
+DisableInterruptSource (
+ VOID
+ )
+{
+ UINTN Bank;
+ UINTN Bit;
+
+ Bank = gVector / 32;
+ Bit = 1UL << (gVector % 32);
+
+ MmioWrite32 (INTCPS_MIR_SET(Bank), Bit);
+}
+
+
+
+/**
+ Setup all the hardware needed for the debug agents timer.
+
+ This function is used to set up debug enviroment. It may enable interrupts.
+
+**/
+VOID
+EFIAPI
+DebugAgentTimerIntialize (
+ VOID
+ )
+{
+ UINT32 TimerBaseAddress;
+
+
+ gVector = InterruptVectorForTimer (PcdGet32(PcdOmap35xxDebugAgentTimer)); +
+ // Set up the timer registers + TimerBaseAddress = TimerBase (PcdGet32(PcdOmap35xxDebugAgentTimer)); + gTISR = TimerBaseAddress + GPTIMER_TISR; + gTCLR = TimerBaseAddress + GPTIMER_TCLR; + gTLDR = TimerBaseAddress + GPTIMER_TLDR; + gTCRR = TimerBaseAddress + GPTIMER_TCRR; + gTIER = TimerBaseAddress + GPTIMER_TIER; +
+ DisableInterruptSource ();
+}
+
+
+/**
+ Set the period for the debug agent timer. Zero means disable the timer.
+
+ @param[in] TimerPeriodMilliseconds Frequency of the debug agent timer.
+
+**/
+VOID
+EFIAPI
+DebugAgentTimerSetPeriod (
+ IN UINT32 TimerPeriodMilliseconds
+ )
+{
+ UINT64 TimerCount; + INT32 LoadValue; + + if (TimerPeriodMilliseconds == 0) { + // Turn off GPTIMER3 + MmioWrite32 (gTCLR, TCLR_ST_OFF); + + DisableInterruptSource (); + } else { + // Calculate required timer count + TimerCount = DivU64x32(TimerPeriodMilliseconds * 1000000, PcdGet32(PcdDebugAgentTimerFreqNanoSeconds)); + + // Set GPTIMER5 Load register + LoadValue = (INT32) -TimerCount; + MmioWrite32 (gTLDR, LoadValue); + MmioWrite32 (gTCRR, LoadValue); + + // Enable Overflow interrupt + MmioWrite32 (gTIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE); + + // Turn on GPTIMER3, it will reload at overflow + MmioWrite32 (gTCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); + + EnableInterruptSource (); + } +}
+
+
+/**
+ Perform End Of Interrupt for the debug agent timer. This is called in the
+ interrupt handler after the interrupt has been processed.
+
+**/
+VOID
+EFIAPI
+DebugAgentTimerEndOfInterrupt (
+ VOID
+ )
+{
+ // Clear all timer interrupts + MmioWrite32 (gTISR, TISR_CLEAR_ALL); + + // Poll interrupt status bits to ensure clearing + while ((MmioRead32 (gTISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);
+
+ MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWFIQAGR);
+ ArmDataSyncronizationBarrier ();
+
+}
+
+
\ No newline at end of file diff --git a/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf b/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf new file mode 100755 index 000000000..44780c37a --- /dev/null +++ b/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.inf @@ -0,0 +1,47 @@ +#/** @file
+# Component description file for Base PCI Cf8 Library.
+#
+# PCI CF8 Library that uses I/O ports 0xCF8 and 0xCFC to perform PCI Configuration cycles.
+# Layers on top of an I/O Library instance.
+# Copyright (c) 2007, Intel Corporation.
+#
+# All rights reserved. This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugAgentTimerLibNull
+ FILE_GUID = E82F99DE-74ED-4e56-BBA1-B143FCA3F69A
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = DebugAgentTimerLib|SEC BASE DXE_CORE
+
+
+[Sources.common]
+ DebugAgentTimerLib.c
+
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ Omap35xxPkg/Omap35xxPkg.dec + ArmPkg/ArmPkg.dec + +
+[LibraryClasses]
+ BaseLib
+ IoLib
+ OmapLib
+ ArmLib
+
+[Pcd]
+ gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer
+ gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds
+
\ No newline at end of file diff --git a/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.c b/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.c index 9d5f429e2..0aea36526 100644 --- a/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.c +++ b/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.c @@ -24,8 +24,7 @@ RETURN_STATUS EFIAPI GdbSerialLibConstructor ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable + VOID ) { return RETURN_SUCCESS; @@ -49,7 +48,7 @@ GdbIsCharAvailable ( VOID ) { - UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG; + UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { return TRUE; @@ -64,8 +63,8 @@ GdbGetChar ( VOID ) { - UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG; - UINT32 RBR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_RBR_REG; + UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; + UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; CHAR8 Char; while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); @@ -80,8 +79,8 @@ GdbPutChar ( IN CHAR8 Char ) { - UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG; - UINT32 THR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_THR_REG; + UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; + UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); MmioWrite8(THR, Char); diff --git a/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.inf b/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.inf index 6d9752a1e..ae46d3579 100644 --- a/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.inf +++ b/Omap35xxPkg/Library/GdbSerialLib/GdbSerialLib.inf @@ -15,7 +15,7 @@ INF_VERSION = 0x00010005 BASE_NAME = GdbSerialLib FILE_GUID = E2423349-EF5D-439B-95F5-8B8D8E3B443F - MODULE_TYPE = UEFI_DRIVER + MODULE_TYPE = BASE VERSION_STRING = 1.0 LIBRARY_CLASS = GdbSerialLib @@ -37,5 +37,5 @@ OmapLib [FixedPcd] - gOmap35xxTokenSpaceGuid.PcdBeagleConsoleUart + gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart diff --git a/Omap35xxPkg/Library/ResetSystemLib/ResetSystemLib.c b/Omap35xxPkg/Library/ResetSystemLib/ResetSystemLib.c index b653f3d47..5aeec5d1e 100644 --- a/Omap35xxPkg/Library/ResetSystemLib/ResetSystemLib.c +++ b/Omap35xxPkg/Library/ResetSystemLib/ResetSystemLib.c @@ -59,7 +59,7 @@ LibResetSystem ( default:
// Perform cold reset of the system.
MmioOr32 (PRM_RSTCTRL, RST_DPLL3);
- while ((MmioRead32(PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
+ while ((MmioRead32 (PRM_RSTST) & GLOBAL_COLD_RST) != 0x1);
break;
}
diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c index 0509deb8a..a4e6e32b4 100644 --- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c +++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.c @@ -56,8 +56,8 @@ SerialPortWrite ( IN UINTN NumberOfBytes
)
{
- UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG;
- UINT32 THR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_THR_REG;
+ UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
+ UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG;
UINTN Count;
for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
@@ -86,8 +86,8 @@ SerialPortRead ( IN UINTN NumberOfBytes
)
{
- UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG;
- UINT32 RBR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_RBR_REG;
+ UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
+ UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG;
UINTN Count;
for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
@@ -113,7 +113,7 @@ SerialPortPoll ( VOID
)
{
- UINT32 LSR = UartBase(PcdGet32(PcdBeagleConsoleUart)) + UART_LSR_REG;
+ UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG;
if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) {
return TRUE;
diff --git a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf index 237f0ea5a..440192fbc 100644 --- a/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf +++ b/Omap35xxPkg/Library/SerialPortLib/SerialPortLib.inf @@ -39,5 +39,5 @@ Omap35xxPkg/Omap35xxPkg.dec
[FixedPcd]
- gOmap35xxTokenSpaceGuid.PcdBeagleConsoleUart
+ gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart
diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.c b/Omap35xxPkg/MMCHSDxe/MMCHS.c index d9739f522..fa1027b7f 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.c +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.c @@ -92,10 +92,10 @@ UpdateMMCHSClkFrequency ( MmioAndThenOr32(MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6); //Poll till Internal Clock Stable - while ((MmioRead32(MMCHS_SYSCTL) & ICS_MASK) != ICS); + while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS); //Set Clock enable to 0x1 to provide the clock to the card - MmioOr32(MMCHS_SYSCTL, CEN); + MmioOr32 (MMCHS_SYSCTL, CEN); } STATIC @@ -110,7 +110,7 @@ SendCmd ( UINTN RetryCount = 0; //Check if command line is in use or not. Poll till command line is available. - while ((MmioRead32(MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); + while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED); //Provide the block size. MmioWrite32 (MMCHS_BLK, BLEN_512BYTES); @@ -133,15 +133,15 @@ SendCmd ( //Check for the command status. while (RetryCount < MAX_RETRY_COUNT) { do { - MmcStatus = MmioRead32(MMCHS_STAT); + MmcStatus = MmioRead32 (MMCHS_STAT); } while (MmcStatus == 0); //Read status of command response if ((MmcStatus & ERRI) != 0) { //Perform soft-reset for mmci_cmd line. - MmioOr32(MMCHS_SYSCTL, SRC); - while ((MmioRead32(MMCHS_SYSCTL) & SRC)); + MmioOr32 (MMCHS_SYSCTL, SRC); + while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); DEBUG ((EFI_D_INFO, "MmcStatus: %x\n", MmcStatus)); return EFI_DEVICE_ERROR; @@ -351,41 +351,41 @@ InitializeMMCHS ( ASSERT_EFI_ERROR(Status); //After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable. - MmioOr32(CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); + MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1)); //Software reset of the MMCHS host controller. MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET); gBS->Stall(1000); - while ((MmioRead32(MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); + while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE); //Soft reset for all. MmioWrite32 (MMCHS_SYSCTL, SRA); gBS->Stall(1000); - while ((MmioRead32(MMCHS_SYSCTL) & SRA) != 0x0); + while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0); //Voltage capabilities initialization. Activate VS18 and VS30. - MmioOr32(MMCHS_CAPA, (VS30 | VS18)); + MmioOr32 (MMCHS_CAPA, (VS30 | VS18)); //Wakeup configuration - MmioOr32(MMCHS_SYSCONFIG, ENAWAKEUP); - MmioOr32(MMCHS_HCTL, IWE); + MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP); + MmioOr32 (MMCHS_HCTL, IWE); //MMCHS Controller default initialization - MmioOr32(MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); + MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF)); MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF)); //Enable internal clock - MmioOr32(MMCHS_SYSCTL, ICE); + MmioOr32 (MMCHS_SYSCTL, ICE); //Set the clock frequency to 80KHz. UpdateMMCHSClkFrequency(CLKD_80KHZ); //Enable SD bus power. - MmioOr32(MMCHS_HCTL, (SDBP_ON)); + MmioOr32 (MMCHS_HCTL, (SDBP_ON)); //Poll till SD bus power bit is set. - while ((MmioRead32(MMCHS_HCTL) & SDBP_MASK) != SDBP_ON); + while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON); return Status; } @@ -407,29 +407,29 @@ PerformCardIdenfication ( CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN)); //Controller INIT procedure start. - MmioOr32(MMCHS_CON, INIT); + MmioOr32 (MMCHS_CON, INIT); MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32(MMCHS_STAT) & CC)); + while (!(MmioRead32 (MMCHS_STAT) & CC)); //Wait for 1 ms gBS->Stall(1000); //Set CC bit to 0x1 to clear the flag - MmioOr32(MMCHS_STAT, CC); + MmioOr32 (MMCHS_STAT, CC); //Retry INIT procedure. MmioWrite32 (MMCHS_CMD, 0x00000000); - while (!(MmioRead32(MMCHS_STAT) & CC)); + while (!(MmioRead32 (MMCHS_STAT) & CC)); //End initialization sequence MmioAnd32(MMCHS_CON, ~INIT); - MmioOr32(MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON)); + MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON)); //Change clock frequency to 400KHz to fit protocol UpdateMMCHSClkFrequency(CLKD_400KHZ); - MmioOr32(MMCHS_CON, OD); + MmioOr32 (MMCHS_CON, OD); //Send CMD0 command. Status = SendCmd(CMD0, CMD0_INT_EN, CmdArgument); @@ -438,22 +438,22 @@ PerformCardIdenfication ( return Status; } - DEBUG ((EFI_D_INFO, "CMD0 response: %x\n", MmioRead32(MMCHS_RSP10))); + DEBUG ((EFI_D_INFO, "CMD0 response: %x\n", MmioRead32 (MMCHS_RSP10))); //Send CMD5 command. Status = SendCmd(CMD5, CMD5_INT_EN, CmdArgument); if (Status == EFI_SUCCESS) { DEBUG ((EFI_D_ERROR, "CMD5 Success. SDIO card. Follow SDIO card specification.\n")); - DEBUG ((EFI_D_INFO, "CMD5 response: %x\n", MmioRead32(MMCHS_RSP10))); + DEBUG ((EFI_D_INFO, "CMD5 response: %x\n", MmioRead32 (MMCHS_RSP10))); //NOTE: Returning unsupported error for now. Need to implement SDIO specification. return EFI_UNSUPPORTED; } else { DEBUG ((EFI_D_INFO, "CMD5 fails. Not an SDIO card.\n")); } - MmioOr32(MMCHS_SYSCTL, SRC); + MmioOr32 (MMCHS_SYSCTL, SRC); gBS->Stall(1000); - while ((MmioRead32(MMCHS_SYSCTL) & SRC)); + while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); //Send CMD8 command. (New v2.00 command for Voltage check) //Only 2.7V - 3.6V is supported for SD2.0, only SD 2.0 card can pass. @@ -461,7 +461,7 @@ PerformCardIdenfication ( CmdArgument = CMD8_ARG; Status = SendCmd(CMD8, CMD8_INT_EN, CmdArgument); if (Status == EFI_SUCCESS) { - Response = MmioRead32(MMCHS_RSP10); + Response = MmioRead32 (MMCHS_RSP10); DEBUG ((EFI_D_INFO, "CMD8 success. CMD8 response: %x\n", Response)); if (Response != CmdArgument) { return EFI_DEVICE_ERROR; @@ -472,9 +472,9 @@ PerformCardIdenfication ( DEBUG ((EFI_D_INFO, "CMD8 fails. Not an SD2.0 card.\n")); } - MmioOr32(MMCHS_SYSCTL, SRC); + MmioOr32 (MMCHS_SYSCTL, SRC); gBS->Stall(1000); - while ((MmioRead32(MMCHS_SYSCTL) & SRC)); + while ((MmioRead32 (MMCHS_SYSCTL) & SRC)); //Poll till card is busy while (RetryCount < MAX_RETRY_COUNT) { @@ -482,7 +482,7 @@ PerformCardIdenfication ( CmdArgument = 0; Status = SendCmd(CMD55, CMD55_INT_EN, CmdArgument); if (Status == EFI_SUCCESS) { - DEBUG ((EFI_D_INFO, "CMD55 success. CMD55 response: %x\n", MmioRead32(MMCHS_RSP10))); + DEBUG ((EFI_D_INFO, "CMD55 success. CMD55 response: %x\n", MmioRead32 (MMCHS_RSP10))); gCardInfo->CardType = SD_CARD; } else { DEBUG ((EFI_D_INFO, "CMD55 fails.\n")); @@ -503,7 +503,7 @@ PerformCardIdenfication ( DEBUG ((EFI_D_INFO, "ACMD41 fails.\n")); return Status; } - ((UINT32 *) &(gCardInfo->OCRData))[0] = MmioRead32(MMCHS_RSP10); + ((UINT32 *) &(gCardInfo->OCRData))[0] = MmioRead32 (MMCHS_RSP10); DEBUG ((EFI_D_INFO, "SD card detected. ACMD41 OCR: %x\n", ((UINT32 *) &(gCardInfo->OCRData))[0])); } else if (gCardInfo->CardType == MMC_CARD) { CmdArgument = 0; @@ -512,7 +512,7 @@ PerformCardIdenfication ( DEBUG ((EFI_D_INFO, "CMD1 fails.\n")); return Status; } - Response = MmioRead32(MMCHS_RSP10); + Response = MmioRead32 (MMCHS_RSP10); DEBUG ((EFI_D_INFO, "MMC card detected.. CMD1 response: %x\n", Response)); //NOTE: For now, I am skipping this since I only have an SD card. @@ -556,10 +556,10 @@ PerformCardIdenfication ( return Status; } - DEBUG ((EFI_D_INFO, "CMD2 response: %x %x %x %x\n", MmioRead32(MMCHS_RSP10), MmioRead32(MMCHS_RSP32), MmioRead32(MMCHS_RSP54), MmioRead32(MMCHS_RSP76))); + DEBUG ((EFI_D_INFO, "CMD2 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76))); //Parse CID register data. - ParseCardCIDData(MmioRead32(MMCHS_RSP10), MmioRead32(MMCHS_RSP32), MmioRead32(MMCHS_RSP54), MmioRead32(MMCHS_RSP76)); + ParseCardCIDData(MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)); //Read RCA CmdArgument = 0; @@ -570,12 +570,12 @@ PerformCardIdenfication ( } //Set RCA for the detected card. RCA is CMD3 response. - gCardInfo->RCA = (MmioRead32(MMCHS_RSP10) >> 16); + gCardInfo->RCA = (MmioRead32 (MMCHS_RSP10) >> 16); DEBUG ((EFI_D_INFO, "CMD3 response: RCA %x\n", gCardInfo->RCA)); //MMC Bus setting change after card identification. MmioAnd32(MMCHS_CON, ~OD); - MmioOr32(MMCHS_HCTL, SDVS_3_0_V); + MmioOr32 (MMCHS_HCTL, SDVS_3_0_V); UpdateMMCHSClkFrequency(CLKD_400KHZ); //Set the clock frequency to 400KHz. return EFI_SUCCESS; @@ -599,12 +599,12 @@ GetCardSpecificData ( } //Populate 128-bit CSD register data. - ((UINT32 *)&(gCardInfo->CSDData))[0] = MmioRead32(MMCHS_RSP10); - ((UINT32 *)&(gCardInfo->CSDData))[1] = MmioRead32(MMCHS_RSP32); - ((UINT32 *)&(gCardInfo->CSDData))[2] = MmioRead32(MMCHS_RSP54); - ((UINT32 *)&(gCardInfo->CSDData))[3] = MmioRead32(MMCHS_RSP76); + ((UINT32 *)&(gCardInfo->CSDData))[0] = MmioRead32 (MMCHS_RSP10); + ((UINT32 *)&(gCardInfo->CSDData))[1] = MmioRead32 (MMCHS_RSP32); + ((UINT32 *)&(gCardInfo->CSDData))[2] = MmioRead32 (MMCHS_RSP54); + ((UINT32 *)&(gCardInfo->CSDData))[3] = MmioRead32 (MMCHS_RSP76); - DEBUG ((EFI_D_INFO, "CMD9 response: %x %x %x %x\n", MmioRead32(MMCHS_RSP10), MmioRead32(MMCHS_RSP32), MmioRead32(MMCHS_RSP54), MmioRead32(MMCHS_RSP76))); + DEBUG ((EFI_D_INFO, "CMD9 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76))); //Calculate total number of blocks and max. data transfer rate supported by the detected card. GetCardConfigurationData(); @@ -660,18 +660,18 @@ ReadBlockData( while (RetryCount < MAX_RETRY_COUNT) { do { //Read Status. - MmcStatus = MmioRead32(MMCHS_STAT); + MmcStatus = MmioRead32 (MMCHS_STAT); } while(MmcStatus == 0); //Check if Buffer read ready (BRR) bit is set? if (MmcStatus & BRR) { //Clear BRR bit - MmioOr32(MMCHS_STAT, BRR); + MmioOr32 (MMCHS_STAT, BRR); //Read block worth of data. for (Count = 0; Count < DataSize; Count++) { - *DataBuffer++ = MmioRead32(MMCHS_DATA); + *DataBuffer++ = MmioRead32 (MMCHS_DATA); } break; } @@ -702,14 +702,14 @@ WriteBlockData( while (RetryCount < MAX_RETRY_COUNT) { do { //Read Status. - MmcStatus = MmioRead32(MMCHS_STAT); + MmcStatus = MmioRead32 (MMCHS_STAT); } while(MmcStatus == 0); //Check if Buffer write ready (BWR) bit is set? if (MmcStatus & BWR) { //Clear BWR bit - MmioOr32(MMCHS_STAT, BWR); + MmioOr32 (MMCHS_STAT, BWR); //Write block worth of data. for (Count = 0; Count < DataSize; Count++) { @@ -759,7 +759,7 @@ TransferBlockData( while (RetryCount < MAX_RETRY_COUNT) { //Read Status do { - MmcStatus = MmioRead32(MMCHS_STAT); + MmcStatus = MmioRead32 (MMCHS_STAT); } while (MmcStatus == 0); //Check if Transfer complete (TC) bit is set? @@ -772,8 +772,8 @@ TransferBlockData( //There was an error during the data transfer. //Set SRD bit to 1 and wait until it return to 0x0. - MmioOr32(MMCHS_SYSCTL, SRD); - while((MmioRead32(MMCHS_SYSCTL) & SRD) != 0x0); + MmioOr32 (MMCHS_SYSCTL, SRD); + while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0); return EFI_DEVICE_ERROR; } @@ -807,7 +807,7 @@ SdReadWrite ( UINTN CmdArgument = 0; //Check if the data lines are not in use. - while ((RetryCount++ < MAX_RETRY_COUNT) && ((MmioRead32(MMCHS_PSTATE) & DATI_MASK) != DATI_ALLOWED)); + while ((RetryCount++ < MAX_RETRY_COUNT) && ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) != DATI_ALLOWED)); if (RetryCount == MAX_RETRY_COUNT) { return EFI_TIMEOUT; } diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.h b/Omap35xxPkg/MMCHSDxe/MMCHS.h index 9baac7493..eafe36b04 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.h +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.h @@ -32,8 +32,8 @@ #define MAX_RETRY_COUNT 100 -#define HCS (0x1UL << 30) //Host capacity support/1 = Supporting high capacity
-#define CCS (0x1UL << 30) //Card capacity status/1 = High capacity card
+#define HCS BIT30 //Host capacity support/1 = Supporting high capacity
+#define CCS BIT30 //Card capacity status/1 = High capacity card
typedef struct {
UINT32 Reserved0: 7; // 0
UINT32 V170_V195: 1; // 1.70V - 1.95V
diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.inf b/Omap35xxPkg/MMCHSDxe/MMCHS.inf index 07ceba13d..ad233b115 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.inf +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.inf @@ -45,7 +45,7 @@ gEmbeddedExternalDeviceProtocolGuid [Pcd] - gOmap35xxTokenSpaceGuid.PcdBeagleMMCHS1Base + gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base [depex] gEmbeddedExternalDeviceProtocolGuid diff --git a/Omap35xxPkg/Omap35xxPkg.dec b/Omap35xxPkg/Omap35xxPkg.dec index 413f1be63..7e35e26e1 100644 --- a/Omap35xxPkg/Omap35xxPkg.dec +++ b/Omap35xxPkg/Omap35xxPkg.dec @@ -38,9 +38,11 @@ [PcdsFeatureFlag.common] [PcdsFixedAtBuild.common] - gOmap35xxTokenSpaceGuid.PcdBeagleConsoleUart|3|UINT32|0x00000202 - gOmap35xxTokenSpaceGuid.PcdBeagleGpmcOffset|0x00000000|UINT32|0x00000203 - gOmap35xxTokenSpaceGuid.PcdBeagleMMCHS1Base|0x00000000|UINT32|0x00000204 - gOmap35xxTokenSpaceGuid.PcdBeagleArchTimer|3|UINT32|0x00000205 - gOmap35xxTokenSpaceGuid.PcdBeagleFreeTimer|4|UINT32|0x00000206 + gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3|UINT32|0x00000202 + gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x00000000|UINT32|0x00000203 + gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x00000000|UINT32|0x00000204 + gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3|UINT32|0x00000205 + gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4|UINT32|0x00000206 + gOmap35xxTokenSpaceGuid.PcdOmap35xxDebugAgentTimer|5|UINT32|0x00000207 + gOmap35xxTokenSpaceGuid.PcdDebugAgentTimerFreqNanoSeconds|1|UINT32|0x00000208 diff --git a/Omap35xxPkg/Omap35xxPkg.dsc b/Omap35xxPkg/Omap35xxPkg.dsc index c8cc298a8..94447c5df 100644 --- a/Omap35xxPkg/Omap35xxPkg.dsc +++ b/Omap35xxPkg/Omap35xxPkg.dsc @@ -148,15 +148,15 @@ gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0x80000000 gArmTokenSpaceGuid.PcdCpuResetAddress|0x80008000 - gOmap35xxTokenSpaceGuid.PcdBeagleGpmcOffset|0x6E000000 - gOmap35xxTokenSpaceGuid.PcdBeagleMMCHS1Base|0x4809C000 + gOmap35xxTokenSpaceGuid.PcdOmap35xxGpmcOffset|0x6E000000 + gOmap35xxTokenSpaceGuid.PcdOmap35xxMMCHS1Base|0x4809C000 # Console - gOmap35xxTokenSpaceGuid.PcdBeagleConsoleUart|3 + gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart|3 # Timers - gOmap35xxTokenSpaceGuid.PcdBeagleArchTimer|3 - gOmap35xxTokenSpaceGuid.PcdBeagleFreeTimer|4 + gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer|3 + gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer|4 gEmbeddedTokenSpaceGuid.PcdTimerPeriod|100000 gEmbeddedTokenSpaceGuid.PcdEmbeddedFdPerformanceCounterPeriodInNanoseconds|77 gEmbeddedTokenSpaceGuid.PcdEmbeddedFdPerformanceCounterFrequencyInHz|13000000 diff --git a/Omap35xxPkg/PciEmulation/PciEmulation.c b/Omap35xxPkg/PciEmulation/PciEmulation.c index 832f733d2..91761c451 100644 --- a/Omap35xxPkg/PciEmulation/PciEmulation.c +++ b/Omap35xxPkg/PciEmulation/PciEmulation.c @@ -62,6 +62,41 @@ ConfigureUSBHost ( EFI_STATUS Status; UINT8 Data = 0; +#if 0 + // Take USB host out of force-standby mode + MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY + | UHH_SYSCONFIG_CLOCKACTIVITY_ON + | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY + | UHH_SYSCONFIG_ENAWAKEUP_ENABLE + | UHH_SYSCONFIG_AUTOIDLE_ALWAYS_RUN); + MmioWrite32 (UHH_HOSTCONFIG, UHH_HOSTCONFIG_P3_CONNECT_STATUS_DISCONNECT + | UHH_HOSTCONFIG_P2_CONNECT_STATUS_DISCONNECT + | UHH_HOSTCONFIG_P1_CONNECT_STATUS_DISCONNECT + | UHH_HOSTCONFIG_ENA_INCR_ALIGN_DISABLE + | UHH_HOSTCONFIG_ENA_INCR16_ENABLE + | UHH_HOSTCONFIG_ENA_INCR8_ENABLE + | UHH_HOSTCONFIG_ENA_INCR4_ENABLE + | UHH_HOSTCONFIG_AUTOPPD_ON_OVERCUR_EN_ON + | UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE); + + // USB reset (GPIO 147 - Port 5 pin 19) output high + MmioAnd32(GPIO5_BASE + GPIO_OE, ~BIT19); + MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19); + + // Get the Power IC protocol. + Status = gBS->LocateProtocol(&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); + ASSERT_EFI_ERROR(Status); + + //Enable power to the USB host. + Status = gTPS65950->Read(gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data); + ASSERT_EFI_ERROR(Status); + + //LEDAON & LEDAPWM control the power to the USB host so enable those bits. + Data |= (LEDAON | LEDAPWM); + + Status = gTPS65950->Write(gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data); + ASSERT_EFI_ERROR(Status); +#else // Get the Power IC protocol. Status = gBS->LocateProtocol(&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950); ASSERT_EFI_ERROR(Status); @@ -91,7 +126,6 @@ ConfigureUSBHost ( // Take USB host out of force-standby mode MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY | UHH_SYSCONFIG_CLOCKACTIVITY_ON - | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY | UHH_SYSCONFIG_ENAWAKEUP_ENABLE | UHH_SYSCONFIG_SOFTRESET ); @@ -110,7 +144,8 @@ ConfigureUSBHost ( // USB reset output high MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19); - + +#endif } EFI_STATUS @@ -544,7 +579,7 @@ PciEmulationEntryPoint ( // Find out the capability register length and number of physical ports. CapabilityLength = MmioRead8(Private->RootBridge.MemoryStart); - PhysicalPorts = (MmioRead32(Private->RootBridge.MemoryStart + 0x4)) & 0x0000000F; + PhysicalPorts = (MmioRead32 (Private->RootBridge.MemoryStart + 0x4)) & 0x0000000F; // Calculate the total size of the USB registers. Private->RootBridge.MemorySize = CapabilityLength + (HOST_CONTROLLER_OPERATION_REG_SIZE + ((4 * PhysicalPorts) - 1)); @@ -553,7 +588,7 @@ PciEmulationEntryPoint ( // Port Power Control (PPC) bit in the HCSPARAMS register is already set which indicates // host controller implementation includes port power control. for (Count = 0; Count < PhysicalPorts; Count++) { - MmioOr32((Private->RootBridge.MemoryStart + CapabilityLength + HOST_CONTROLLER_OPERATION_REG_SIZE + 4*Count), 0x00001000); + MmioOr32 ((Private->RootBridge.MemoryStart + CapabilityLength + HOST_CONTROLLER_OPERATION_REG_SIZE + 4*Count), 0x00001000); } // Create fake PCI config space. diff --git a/Omap35xxPkg/TimerDxe/Timer.c b/Omap35xxPkg/TimerDxe/Timer.c index 3ae0cc2ad..e7684eedd 100644 --- a/Omap35xxPkg/TimerDxe/Timer.c +++ b/Omap35xxPkg/TimerDxe/Timer.c @@ -98,7 +98,7 @@ TimerInterruptHandler ( MmioWrite32 (TISR, TISR_CLEAR_ALL); // Poll interrupt status bits to ensure clearing - while ((MmioRead32(TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING); + while ((MmioRead32 (TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING); gBS->RestoreTPL (OriginalTPL); } @@ -372,7 +372,7 @@ TimerInitialize ( ASSERT_EFI_ERROR (Status); // Set up the timer registers - TimerBaseAddress = TimerBase(FixedPcdGet32(PcdBeagleArchTimer)); + TimerBaseAddress = TimerBase(FixedPcdGet32(PcdOmap35xxArchTimer)); TISR = TimerBaseAddress + GPTIMER_TISR; TCLR = TimerBaseAddress + GPTIMER_TCLR; TLDR = TimerBaseAddress + GPTIMER_TLDR; @@ -384,7 +384,7 @@ TimerInitialize ( ASSERT_EFI_ERROR (Status); // Install interrupt handler - gVector = InterruptVectorForTimer(FixedPcdGet32(PcdBeagleArchTimer)); + gVector = InterruptVectorForTimer(FixedPcdGet32(PcdOmap35xxArchTimer)); Status = gInterrupt->RegisterInterruptSource(gInterrupt, gVector, TimerInterruptHandler); ASSERT_EFI_ERROR (Status); diff --git a/Omap35xxPkg/TimerDxe/TimerDxe.inf b/Omap35xxPkg/TimerDxe/TimerDxe.inf index a53c3b3b1..caee465d7 100644 --- a/Omap35xxPkg/TimerDxe/TimerDxe.inf +++ b/Omap35xxPkg/TimerDxe/TimerDxe.inf @@ -52,7 +52,7 @@ [Pcd.common] gEmbeddedTokenSpaceGuid.PcdTimerPeriod gEmbeddedTokenSpaceGuid.PcdEmbeddedFdPerformanceCounterPeriodInNanoseconds - gOmap35xxTokenSpaceGuid.PcdBeagleArchTimer + gOmap35xxTokenSpaceGuid.PcdOmap35xxArchTimer [Depex] gHardwareInterruptProtocolGuid
\ No newline at end of file |